Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Consultancy Services
Civil And Architectural Services
Eprocure
Opening Date22 Jul 2024
Closing Date31 Jul 2024
Tender Amount₹ 6,63,54,546
Costs
EMD
₹ 13,27,100Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Additional Complex (additional Block) In Judicial Complex At Nahan, Distt. Sirmour (hp)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_90816_1Bid Award Id
ViewTender No
NAHAN 2068-87Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Construction of embankment with approved materials deposited at site from road way cutting & excavation from drain & foundation of other structures graded and compacted to meet the requirement of Table 300.1 & 300.2 as per Technical Specification clause 301.5 including hauling of materials within all leads & lifts & other incidential charges & as per direction of Engineer-in-Charge.
80.6
9152
113.55
Supplying & filling in plinth with sand under floors including watering, ramming, consolidating & dressing complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
83.36
120542
1446.05
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
191.34
947152
4950.1
Providing concrete for plain/reinforced concrete in open foundations complete as per drawing & technical specification clauses 802,803,1202 & 1203 nominal mix cement concrete 1 : 4 : 8 ( One cement : four sand : eight graded stone aggregate 25 mm nominal size ) including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.
206.95
1031211
4982.9
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:5:10 (One Cement : five coarse sand : ten graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
20.49
93781
4576.95
Providing & laying cement concrete in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapet coping, bed blocks, anchor blocks, plain window sills, fillets, Sunken floor etc., upto floor five level, excluding the cost of centring, shuttering & finishing 1 : 1.5 : 3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.
5.98
48603
8127.75
Making plinth protection 50 mm ( fifty milimetre ) thick of cement concrete 1 : 3 : 6 ( One cement : three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) over 75 mm ( seventy five milimetre ) thick bed of dry brick ballast 40 mm ( forty milimetre ) nominal size, well rammed & consolidated & grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
119.63
67028
560.3
Providing and laying in position cement concrete of specified grade mechanically mixed , vibrated & curing complete excluding the cost of centering, shuttering, finishing & reinforcement - All work up to plinth level and all floor level in 1:1.5 : 3 (One Cement : One & half coarse sand : five graded stone aggregate 20mm (twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
255.47
1866770
7307.2
Providing and laying reinforced cement concrete work in walls (any thickness), mechanically mixed, vibrated and curing complete including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level , excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
302.21
2593671
8582.35
Providing and laying reinforced cement concrete work mechanically mixed & vibrated in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level mechanically mixed, vibrated and curing complete, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
632.35
5675404
8975.1
Foundations, footings, bases of columns, etc. for mass concrete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.Providing form work with steel plates 3.15mm ( three point fifteen millimeter ) thick welded with angle iron in frame 30X 30X5mm ( thirty X thirty X five millimeter ) so as to give a fair finish including centering ,shuttering, strutting and propping etc. with wooden battens and ballies , height of propping and centering below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) and removal of the same for insitu- reinfoced concrete and plain concrete work including all leads and lifts of materials or as per the directions of Engineer in Charge.
260.5
57648
221.3
Walls ( any thickness ) including attached pilasters, buttresses, plinth & string courses etc. including all leads, lifts & carraiage of materials & to the entire satisfaction of the Engineer-in-Charge .
405.96
200523
493.95
Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1944.8
1124872
578.4
Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1680.3
802511
477.6
Columns, Pillars, Piers, Abutments, Posts and Struts Circular including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
484.43
268616
554.5
Stairs, (excluding landings) except spiral stair cases including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
109.26
54269
496.7
Edges of slabs and breaks in floors and walls Under 20cm ( twenty centimeter ) wide including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
479.1
58929
123
Weather shade, Chajja, Corbels etc. including edges including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
194.22
132292
681.15
Providing and placing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding wire all complete upto floor all level. Thermo-Mechanically Treated bars of grade Fe-500 D or more including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
215662.34
22633762
104.95
Extra for rendering smooth the top of suspended floors, landings and staircases ( treads & risers ) with cement mortar 1 : 2 ( One cement : two coarse sand ), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm ( Seven point five centimetre ) of earth laid over 15 mm ( fifteen milimetre ) of fine sand in case of suspended floors and brick laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same complete,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
227.61
26141
114.85
Providing & fixing sheet covering over expension joints with iron screws as per design aluminium fluted strips 3.15 mm ( three point one five milimetre ) thick 100 mm ( one hundred milimetre ) wide,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
49.5
25517
515.5
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
112.11
822814
7339.35
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all floor level in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
280.5
2389200
8517.65
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1 :4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
147.62
133308
903.05
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes : Cement mortar 1 : 4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1690.55
1749381
1034.8
Stone/ boulder filling behind retaining wall/ under flooring, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
104.64
200076
1912.05
Supplying & filling brick bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm ( Fifty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
51.8
55638
1074.1
Providing weep holes in brick/ stone masonry, plain/ reinforced concrete abutment, wing wall return walls with 100 mm ( One hundred milimetre ) dia PVC pipe extended through the full width of the structure with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing & technical specification clause 614,709,1204, 3.7 including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-Charge.
280
69202
247.15
Providing & fixing 18 mm ( eighteen milimetre ) thick for wall lining ( veneer work ) , backing filled with a grout of average 12 mm ( Twelve milimeter ) thick in cement mortar 1 : 3 ( One cement : three coarse sand ), including pointing with white cement mortar 1 : 2 ( One white cement : two marble dust ) with an admixture of of pigment to match the marble shade ) ( To be secured to the backing by means of cramps, which shall be paid for separately ) , including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
87.31
523283
5993.4
Providing & fixing 18 mm ( eighteen milimetre ) thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen plateforms,vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm ( twenty milimetre ) thick base cement mortar 1 : 4 ( One cement : four coarse sand ), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high glass finish etc. complete at all level Granite of any colour, shade & all area of slab including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
5.46
21604
3956.95
Providing wood work in frames of flase ceiling, partation etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4.97
457289
91954.45
Providing wood work in frames of flase ceiling, partation etc. sawn and fixed in position with necessary stainless steel screws etc. Sheesham wood, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
0.62
59170
94976.65
Providing & fixing plywood 4 mm ( four milimetre ) thick, one side decorative veneer conforming to IS : 1328 ( Type-I ), for plain lining/ cladding with necessary screws, including priming coat of unexposed surface with decorative veneer facings of approved manufacture, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
765.2
963769
1259.5
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coat on unexposed surface etc. complete second class teak wood 25 x 12 mm ( twenty five into twelve milimetre )size, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
412.29
61678
149.6
Providing & fixing Cub board shutters 19 mm ( nineteen milimetre ) thick with pre-laminated flat pressed three layers particle board or graded wood particle board IS: 12823 marked exterior grade ( Grade I type II ) , having one side decorative lamination & other side balancing lamination, including second class teak wood lipping of 25 mm wide 12 mm thick ( twenty five milimetre wide twelve milimetre ) thick ) with necessary screws & bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
147.61
308984
2093.25
Providing & fixing 19 mm ( Nineteen milimetre ) thick water proof commercial board in shelves/box for Cub board with butt joints & fixing with nails & screws etc. complete, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
96.55
119133
1233.9
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss /matt/ Suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type-S, including cost of adhesive of approved quality 1.00 mm ( One milimetre ) thick sheet, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
147.61
115298
781.1
Providing and fixing Pre-laminated flat pressed three layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer ( fittings to be paid separately ).25 mm ( twenty five milimetre ) thick board, including all leads, lifts & carriage of materials & to the entire dsatisfaction of the Engineer-in-Charge.
6.48
11737
1811.3
Providing & fixing special quality bright finished brass cub board or ward robe locks with four levers of approved quality including necessary screws etc. complete 50 mm ( fifty milimetre ) size, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
49
13558
276.7
Providing & fixing 50mm ( fifty milimetre ) bright finished brass cub board or ward robe knob of approved quality with necessary screws, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
49
3062
62.5
Providing & fixing magetic catcher of approved quality in Cub board/ ward robe shutters, including fixing with necessary screws etc. complete double trip ( horizontal type ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
49
1741
35.55
Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ), panelling for panelled or panelled & glazed shutters 25 mm to 40 mm ( twenty five milimetre to forty milimetre ) thick Particle board 12 mm ( Twelve milimetre ) thick pre-laminated particle board with decorative lamination on both side, grade 1, Type-II, IS: 12823 marked, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
207
355305
1716.45
Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ), panelling for panelled or panelled & glazed shutters 25 mm to 40 mm ( twenty five milimetre to forty milimetre ) thick ,5.5mm ( five point five milimetre ) thick glass pans ( weight not less than 12.5 Kg ( Twelve point five kilogramme ) per square metre ),including all leads, lifts, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3.24
6133
1893.15
Providing & fixing panelled or panelled & glazed shutters for doors, windows & clerestory windows fixing with butt hinges or required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge,Butt hinges & necessary screws shall be paid for separately, Second class Deodar wood, 35 mm thick shutters.,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
9.91
33472
3377.6
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coaat on unexposed surface etc. complete Second class teak wood 50 x 12 mm, ( fifty into twelve milmetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
602.6
105033
174.3
Providing & fixing expandable fasterners of specified size with necessary plastic sleeves and galvanised mild steel screws including drilling holes in masonry work/ cement concrete/ reinforced cement concrete & making good etc. complete 40 mm ( forty milimeter ) long, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
174
3714
21.35
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 300 x 16 mm ( three hundred into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
69
18078
262
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
24
5605
233.55
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
138
12495
90.55
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 x 10 mm ( One hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2350
186002
79.15
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twentyfive milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
138
8266
59.9
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm ( one hundred milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1180
62304
52.8
Providing & fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand ) logo with ISI, IS:3564, embossed on the body, door weight upto 35Kg ( Thirty five kilogram ) door with upto 700mm ( seven hundred milimetre ) with necessary accessories & screws etc. complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
34
35501
1044.15
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
63
2132
33.85
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Twin rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
62
3952
63.75
Structural steel work riveted, bolted or welded in built up sections, trusses & framed work,including cutting, hoisting, fixing in postion & applying a priming coat of approved steel primer all complete, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
17600
2054800
116.75
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
370.5
47609
128.5
Providing & fixing mild steel round holding down bolts with nuts & washers plates complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
250
24275
97.1
Providing & fixing stainless steel ( Grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) & fitting the same with necessary stainless steel nuts & bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc. ) , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1357.29
742369
546.95
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm ( twenty into ten into two milimetre ) and braced with flat iron diagonals 20x5 mm ( twenty into five milimetre ) size, with top and bottom rail of T-iron 40x40x6 mm ( forty into forty into six milimetre ), with 40 mm ( forty milimetre ) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
21.38
183967
8604.65
Providing & fixing angle iron frame with 25 mm ( twenty five milimetre ) thick water proof termite resistant commerical board covered with 1.6 to 1.8 mm ( One point six to one point einght milimetre ) thick heavy duty PVC anti bacterial antistaic venyl flooring ISI marked 3462/ 1986 of LG or its equivalent of approved coloured, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
328.7
521729
1587.25
Providing & fixing aluminium frame work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/ appropriate Z sections & other sections of approved make conforming to IS : 733 & IS : 1285, fixing with dash fasteners of required dia & size, including necessary filling up the gaps at junctions, i.e. at top, bottom & sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, stright, mitred & jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per Architectural drawings & the direction of Engineer-in-Charge ( Glazing, panelling & dash fasteners to be paid for separately ) For fixed portion, Powder coatd aluminium ( minimum thickness of powder coating 50 micron ),including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3868.18
2048781
529.65
Providing & fixing aluminium work for style of windows, ventilators & partitions with extruded built up standard tubular sections/ appropriate Z sections & other sections of approved make conforming to IS : 733 & IS : 1285, fixing with dash fasteners of required dia & size, including necessary filling up the gaps at junctions, i.e. at top, bottom & sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, stright, mitred & jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per Architectural drawings & the direction of Engineer-in-Charge ( Glazing, panelling & dash fasteners to be paid for separately ) For For shutters of doors, windows & ventilators including providing & fixing hinges/Pivots & making provision for fixing of fittings whereever required ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
1250.34
768271
614.45
Providing and fixing glazing in aluminium door, windows, ventilators shutters and partations etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawing and the direction of Engineer-in-Charge ( Cost of aluminium snap beading shall be paid in basic item ) with float glass pans of 4.00 mm ( four point zero milimetere thickness ( weight not less than 10 ( ten ) square metres, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
373.35
451156
1208.4
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws at the rate of 200 mm ( two hundred milimetre ) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
1026.71
702166
683.9
Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from mild steel sheets & galvanised with zinc coating of 120 ( one hundred twenty ) gramme per square metre ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6mm ( twenty five milimeter into one point six milimetre ) thick with flanges of 27 mm and 37 mm, at 1200 mm ( twenty seven milimetre, thirty seven milimetre , at 0ne thousnd two hundred milimetre ) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm ( Twelve point five milimetre dia into fifty milimetre ) long with 6 mm ( six milimetre ) dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.50 mm( twenty five into ten into zero point five zero milimetre ) of required length with nuts & bolts of required size & other end of angle hanger fixed with intermediate galvanised iron channels 45x15x0.90mm ( forty five into fifteen into zero point nine zero milimetre ) running at the spacing of 1200mm ( One thousand two hundred milimetre ) centre to centre, to which the ceiling section 0.5 mm ( zero point five milimere ) thick bottom wedge of 80 mm ( eighty milimetre ) with tapered flanges of 26 mm ( twenty six milimetre ) Per Each having lips of 10.5 mm, at 450mm ( ten point five milimetre, at four hundred fifty milimetre ) centre to centre, shall be fixed in a direction perpendicular to galvanised iron intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm ( two point six four milimetre dia into two hundred thirty milimetre ) long galvanised iron wire at every junction, including fixing perimeter channel 0.5mm ( zero point five milimetre ) thick 27mm ( twenty seven milimetre ) high having flanges of 20 mm and 30 mm ( twenty milimetre & thirty milimetre ) long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm ( twenty five milimetre ) long dry wall screws @ 230 mm ( at the two hundred thirty milimetre ) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm ( three point five into twenty five milimetre at two hundred thirty milimetre ) centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes finishing with jointing compound in three layers covering upto 150 mm ( one hundred fifty milimetre ) on both sides of joint & two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawing, specification & direction of the Engineer-in-Charge but excluding the cost of painting with phenothern ( AL/DP ) 20 mm ( twenty milimetre ) thick of approved shade 60 x 60 cm ( sixty into sixty milimetre ) board of approved quality ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
353.2
468201
1325.6
Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm ( forty milimetre ) thick with 20mm ( twenty milimetre ) nominal size ) stone aggregate including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
682.45
297206
435.5
Cement plaster skirting upto 30 cm ( thirty centimetre ) height, with cement mortar 1 : 3 ( One cement : three sand ) finished with a floating coat of neat cement 18 mm ( eighteen milimetre ) thick, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
59.05
26968
456.7
Providing & fixing glass strips in joints of terrazo/ cement concrete floors 40 mm ( forty milimertre ) wide & 4 mm ( four milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1664.51
110689
66.5
Mirror polished Kota stone slab flooring over 20 mm ( twenty milimetre ) ( average ) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand ) 19 mm ( ninteen milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1295.2
2088639
1612.6
Mirror polished Kotah stone slab 20 mm ( twenty milimetre ) thick in risers of steps, skirting, dado & pillars laid on 12 mm ( twelve milimetre ) ( average ) thick cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
108.18
185371
1713.55
Automatic vibro hydraulically compressed 300 x 300 x 25 mm ( three hundred into three hundred into twenty five milimetre ) polished terrazo tiles ISI marked No. 1237 in 70 % ( Seventy percent ) white, 30 % ( thirty percent ) grey cement ratio. The ratio of chips shall be 55 % ( fifty five percent ) white & 15 % ( fifteen percent ) of Per Each maroom, yellow & dark shade laid over a bed of 25 mm ( twenty five milimeter ) average thickness of cement mortar 1 : 6 ( One cement : six coarse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in flooring. The size of chips shall be ), B, 2B of NTC or its equivalent, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
89.71
142674
1590.4
Automatic vibro hydraulically compressed 300 x 300 x 25 mm ( three hundred into three hundred into twenty five milimetre ) polished terrazo tiles ISI marked No. 1237 in 70 % ( Seventy percent ) white, 30 % ( thirty percent ) grey cement ratio. The ratio of chips shall be 55 % ( fifty five percent ) white & 15 % ( fifteen percent ) of Per Each maroom, yellow & dark shade laid over a bed of 25 mm ( twenty five milimeter ) average thickness of cement mortar 1 : 6 ( One cement : six coarse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in skirting or dedo. The size of chips shall be ), B, 2B of NTC or its equivalent, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
8.01
13458
1680.2
Providing & laying vitrified double charge floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kg ( three point three Kilogram ) per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm ( six hundred into six hundred milimetre ) , including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
87.12
148674
1706.55
Providing & laying vitrified double charge tiles in different sizes ( thickness to be specified by manufacturer ) , with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 Kg ( Three point three Kilogram ) per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm ( six hundred into six hundred milimetre ) , including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3.8
6869
1807.8
Providing & fixing Ist quality Ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacture ) , of approved make in all clours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps & dados, over 12 mm ( twelve milimetre ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry @ 3.3 kilogramme per Square meters, including pointing in white cement mixed with pigment of matching shade complete, including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
300.91
291145
967.55
Providing & laying factory made chamfered edge cement concrete paver blocks in footpath, parks,lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm ( fifty milimetre ) thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand & cutting of paver block as per required size & pattern, finishing & sweeping extra sand, complete all as per direction of Engineer-in-Charge, 80 mm ( Eighty milimetre ) thick cement concrete paver block of M-30 ( thirty ) grade with approved colour design & pattern, including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge
225
265680
1180.8
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 110mm ( One hundred ten millimeter ) diameter metre.
169.5
77919
459.7
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 110mm ( eighty seven point five degree one hundred ten millimeter ) bend.
10
1565
156.5
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Shoe ( Plain )110mm ( One hundred ten millimeter ) shoe.
20
2703
135.15
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 75 mm ( Seventy five millimeter ) diameter metre.
44.1
12564
284.9
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 75 mm ( eighty seven point five degree Seventy five millimeter ) bend.
2
241
120.9
Providing & fixing mild steel holder bat clamps of approved design to cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ) & cost of cutting holes & making good the wall etc. 110 mm ( One hundred ten milmetre ) diameter PVC pipe including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
50
11747
234.95
Providing & fixing 0.60 mm ( sixty milimetre ) thick prepainted steel sheet of TATA Dora shinein roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting to back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia metre with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
538.95
739601
1372.3
Providing & fixing ridge or hips 0.45 cm ( forty five centimetre ) over all with thick prepainted steel sheet of TATA Dora Shine in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia and prepainted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
86.8
61779
711.75
Providing & fixing valley 60cm overall 0.40 mm ( forty milimetre ) thick prepainted steel sheet of Tata Dora Shine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
46.2
40637
879.6
Providing & fixing flushing 38 cm ( thirty eight centimetre ) overall with 0.45 mm ( Zero point four five milimetre ) thick prepainted sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 microns over 5 ( five milimetre ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm ( six milimemetre ) dia and prepainted Galvanised iron limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
25
16265
650.6
Providing flat iron bracket 50 x 3 mm ( Fifty into three milimetre ) size with necessary bolts, nuts & washers etc. for fixing galvanised steel sheets gutters with purlins including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
135
10928
80.95
Providing & fixing 30 cm ( thirty centimetre ) wide 120 cm ( one hundred twenty centimetre ) overall Box type prepainted Zinc coated sheet gutter with iron bracket 40 x 3 mm ( forty into three milimetre ) size, bolts & nuts and washers etc. including making necessary connections with rain water pipes complete as per design. 0.45 mm ( forty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
134.7
127655
947.7
Providing & fixing mild steel B.P. sheet 1.66 mm to 2 mm ( One point six six milimetre to two milimetre ) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
31.04
59671
1922.4
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:4 ( one cement : four fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
150.27
40219
267.65
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:6 ( one cement : six fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8518.65
2090902
245.45
6mm ( six millimeter ) cement plaster of mix 1:4 (one cement : four fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2073.84
394133
190.05
Providing & applying plaster of paris putty of 2 mm ( two milimetre ) thickness over plastered surface to prepare the surface even & smooth complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9560.1
933543
97.65
Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
6461.66
547302
84.7
Finishing walls with 100 % ( One hundred percent ) premium acrylic emulsion paint having VOC less than 50 ( fifty ) gram per litre UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tined ) with silicon additives new work ( Two or more coats applied @ 1.43 ( One point four three ) Litre per 10 ( ten ) square metres over & including priming coat of exterior primer applied @ 0.90 ( Ninety ) litre per 10 ( ten ) Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
808.47
103888
128.5
Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1966.91
263172
133.8
Finishing with Deluxe Multi surface paint system for interior & exterior using primer as per manufactures specifications , Two or more coats applied on walls @ 1.25 ( One point twenty five ) litre per 10 ( ten ) square metres over & including one coat of special primer applied @ 0.75( Zero point seven five ) litre per 10 ( ten ) Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
971.57
116977
120.4
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint of requied shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.80 ltr/ 10sqm( zero point eight zero litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
642.16
66399
103.4
Polishing on wood work with ready mixed wax polish of approved brand and manufacture new work, including all leads, ,lifts, carriage of materials & to the entire satisfaction of the Engineerr-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
845.22
136545
161.55
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm ( one hundred millimeter ) sand cast Iron P or S trap, 10 litre ( ten litre ) low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge: White Vitreous china Orissa pattern W.C. pan of size 580mm x 440mm ( five hundred eighty millimetre X four hundred forty millimeter ) with integral type foot rests.
12
54510
4542.55
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), Universal pan No. 2061 size 570 x 460 mm( five hundred seventy into four hundred sixty milimetre ) , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . W.C. Pan with ISI marked white solid seat & Lid, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
9
44724
4969.35
Providing & fixing white Vitreous China flat back half stall urinal of size 630 x 420 x 390 mm ( Six hundred thirty into four hundrded twenty into three hundred ninety milimetre ) with white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per large No. 5001 & 2851,C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Range of two half stall Urinals with 5 litre P.V.C. automatic flushing cistern, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
8
85215
10651.9
Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) complete with single 15 mm ( fifteen milimetre ) C.P. Brass pillar tap, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5
15404
3080.9
Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- White Vitreous China wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) with a pair 15 mm ( fifteen milimetre ) C.P. brass pillar tap, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
72589
3629.45
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
20
30587
1529.35
Constructing masonry Chamber 30 x 30 x 50 cm ( thirty into thirty into fifty centimetre ) in side, in brick work in cement mortar 1 : 4 ( One cement : four coarse sand ) for stop cock, with cast iron surface box 100 x 100 x 75 mm ( One hundred into one hundred into seventy five milimetre ) ( inside ) with hinged cover fixed in cement concrete slab 1 : 2 : 4 mix ( one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty milimetre ) nominal size ), including necessary excavation, foundation concrete 1 : 5 : 10 ( one cement : five coarse sand : ten graded stone aggregate 40 mm ( forty milimetre ) nominal size ) and inside plastering with cement mortar 1 : 3 ( One cement : three coarse sand ) 12mm ( twelve milimetre ) thick, finished with a floating coat of neat cement complete as per standard design, with common burnt clay F.P.S. ( Non modular ) bricks of class designation 7.5,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5
11304
2260.95
Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm ( forty milimetre ) including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink without drain board 460 x 385 mm ( Four hundred sixty into three hundred eighty five milimetre ) bowl depth 200 mm, ( Two hundred milimetre ) including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
4
10964
2741.05
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 1216 (16 mm ( sixteen millimeter ) OD) pipe.
221.5
88611
400.05
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:-1620 (20mm ( twenty millimeter ) OD) pipe.
150
66547
443.65
Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore.
150
63900
426
Providing and fixing G.I. pipes complete with G.I. fittings including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work :- 20mm ( twenty millimetre ) dia.
75
37297
497.3
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.External work:-15mm ( fifteen millimeter ) dia nominal bore.
150
37462
249.75
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 25 mm to 40mm ( twenty five millimeter to forty millimeter ) nominal bore.
1
616
616.5
Fixing water meter & stop cock in G.I. pipe line including cutting & threading the pipe & making long screws etc. complete ( Cost of water meter & stop cock to be paid separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
1
531
531.25
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
14500
131950
9.1
Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
25
26250
1050
Providing and fixing 600mm x 120mm x 5mm ( Six hundred millimeter into one hundred twenty millimeter into five millimeter ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm ( forty millimeter ) long screws, rawl plugs etc., complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
25
20807
832.3
Providing and fixing Toilet paper holder C.P. brass, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8
4612
576.55
Providing and fixing PTMT liquid soap container 109mm ( one hundred nine millimeter ) wide, 125mm( one hundred twenty five millimeter ) high and 112mm( one hundred twelve millimeter ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms ( one hundred five grams ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
5
1209
241.85
Providuing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm ( Four hundred fifty milimetre ) long towel rail with total length of 495 mm, 78 mm ( Four hundred ninety five milimeter, seventy eight milimetre ) wide & effective height of 88 mm ( eighty eight milimetre ) , weighting not less than 170 ( One hundred seventy ) grams, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
25
12756
510.25
Providing & fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete,including carriage of materials in all leads and lifts and as directed by the Engineer-in-Charge.
20
3600
180
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
118
67985
576.15
Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
75
55481
739.75
Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
90
59539
661.55
Providing & fixing C.P. brass extension nipple ( Size 15 mm x 50 mm ) of approved make and quality as per direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in Charge.
125
7112
56.9
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150mm dia ( One hundred fifty milimetre ) including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
210
105189
500.9
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 100 mm ( One hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
190
69540
366
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
150
40410
269.4
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( one hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
11844
263.2
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 100 mm ( one hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
7042
234.75
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
5157
206.3
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
120
16560
138
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 100 mm ( One hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
90
10498
116.65
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
60
5718
95.3
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
120
15708
130.9
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
90
9859
109.55
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
60
5718
95.3
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
8735
436.75
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
5271
351.4
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
28615
635.9
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
14809
493.65
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
10030
401.2
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
4929
109.55
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
2646
88.2
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
1850
74
Providing & fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
1543
308.7
Providing & fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
1188
237.6
Providing & fixing 100 mm ( One hundred milimetre ) dia sand cast iron grating for gully, floor or Nahni trap, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
3651
182.55
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 150 mm x 110 mm ( One hundred fifty milimetre into one hundred ten milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
35
5477
156.5
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
3378
135.15
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 90 mm ( One hundred ten milimetre into ninety milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
40
23230
580.75
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
10911
436.45
Providing & fixing 15 mm ( fifteen milimetre ) mixer for kitchen sink with top/ bottom swining spouts, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
4
9674
2418.5
Cutting holes to 30 x 30 cm in walls including making good the same with common burnt clay F.P.S. ( Non modular ) bricks, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
150
45405
302.7
Providing & fixing 8 mm ( eight milimetre ) dia C.P./S.S. Jet with flexible tube upto 1.00 ( One ) metre long with S.S.triangular plate to Eureopean type W.C. of quality & make as approved by Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
9
3329
369.9
Providing & fixing grab bars 600mm x 40mm ( six hundred milimetre into forty milimetre ) in handicapped toilets two number Per Each Chromium plated 40mm ( forty milimetre ) dia steel pipe at 78cm ( seventy eight centimetre ) height with mild steel plates as per detail at the position of the seat & wash basin, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
1
2454
2454.05
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20mm ( twenty millimeter ) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40mm ( forty millimeter ) nominal size), inside plastering 12mm ( twelve millimeter ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter ) nominal size) finished with a floating coat of neat cement complete as per standard design complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. : Inside size 90cm x 80cm and 45cm ( Ninety centimeter into eighty centimeter and forty five centimeter ) deep including C.I. cover with frame (medium duty) 455 x 610 mm ( Four hundred fifty five into Six hundred ten millimeter ) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram ) (weight of cover 23 kg ( twenty three kilogram ) and weight of frame 15 kg( fifteen kilogram ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
10
117200
11720.05
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) rectangular shape 600 x 450 mm ( six hundred into four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
6
7739
1289.9
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) square shape 450 mm ( four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
12
13188
1099
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements