Municipal Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Municipal Corporation Tender
Eprocure
Opening Date17 Feb 2021
Closing Date23 Mar 2021
Tender AmountRefer Documents
Costs
EMD
₹ 15,54,320Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_MC_44428_1Bid Award Id
ViewTender No
7284-88 dt 16-02-2021Tender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
35.7
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
4690.4
-
-
... More
Plaster - Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
198.8
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
187.6
-
-
... More
North Disposal- Construction of Filter Feed Tanks
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
334.8
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
44.6
-
-
... More
Ready Concrete for Substructure (M 30 Grade) - Providing and laying cement concrete work using concrete mix of M-30 with graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work plain concrete work in : Foundation and Plinth
75.8
-
-
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
28.4
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
10419.6
-
-
... More
Providing G.I pipe railing in 3 row 25 mm dia.
20
-
-
... More
Providing and fixing 1.2 m high railing of 40 mm dia. G.I. pipe in three rows at 40 cm C to C with vertical angle 65x65x6 mm, embedded in masonry or in concrete placed at 3 m C to C on top of weirs, dams etc. including providing M.S. plate of size 200x200x3 mm welded to the bottom of railing posts for anchorage
53.6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
364.2
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
113.6
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
364.2
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
North Disposal - Retrofitting of Grit Settler -1
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
120
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
2.9
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
120
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
86.4
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
120
-
-
... More
North Disposal - Retrofitting of GRIT SETTLER -2
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
148
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
3.6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
148
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
105.7
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
148
-
-
... More
North Disposal - Retrofitting of AERATION TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
2502.1
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
71.4
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
2502.1
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
1210.3
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
2502.1
-
-
... More
Providing and fixing M.S Ladder
9
-
-
... More
Providing and fixing copper lighting Conductor
30
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
North Disposal - Retrofitting of SECONDARY CLARIFIER
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
4479.7
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
130.7
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
4479.7
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
2687.8
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
4479.7
-
-
... More
Providing and fixing M.S Ladder
6
-
-
... More
Providing and fixing copper lighting Conductor
20
-
-
... More
Providing and constructing C.I Cowl type ventilator
100
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
North Disposal - Retrofitting of FLASH MIXER TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
25.1
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
1.3
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
25.1
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
23
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
25.1
-
-
... More
Providing and fixing M.S Ladder
2
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
North Disposal - Retrofitting of CLARIFLOCCULATOR
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
2470.9
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
66.2
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
2714.2
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
1412
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
2714.2
-
-
... More
Providing and fixing M.S Ladder
3
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing and constructing C.I Cowl type ventilator
50
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
North Disposal - Retrofitting of CHEMICAL DOSING TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
62.2
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
2
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
62.2
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
56.8
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
62.2
-
-
... More
Providing and fixing M.S Ladder
12
-
-
... More
SLUDGE WELL
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
253.4
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
7.2
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
253.4
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
203.5
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
253.4
-
-
... More
Providing and fixing M.S Ladder
12
-
-
... More
North Disposal - Retrofitting of FILTER PRESS HOUSE
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
9.3
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
207
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
168.2
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
324
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
9.3
-
-
... More
North Disposal - Retrofitting of ADMIN CUM LAB ROOM
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
3.8
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
94.6
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
71.1
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
158.4
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
3.8
-
-
... More
North Disposal - Replacement of Pipes
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
235
-
-
... More
Supplying, laying, jointing,testing Centrifugally cast Ductile iron (Spun) pressure pipes confirming to IS 8329/2000 class K/7. (Earth work in Trenches to be measured and paid separately).
-
-
-
... More
Dia 150mm
125
-
-
... More
Dia 200mm
275
-
-
... More
Dia 250mm
90
-
-
... More
Dia 300mm
50
-
-
... More
Dia 350mm
50
-
-
... More
Dia 400mm
25
-
-
... More
North Disposal - Construction of Office cum Blower Room
-
-
-
... More
Construction of RCC framed structure - office cum blower room in M-20 aesthetically designed, including follwing components;
Anti skit tiles, Anodized aluminium frames, doors and windows,
Interal electrical wiring, water supply, sanitary, other allied items
Septic tank or sewerline for sewage disposal required to complete the work, etc.
63
-
-
... More
Providing, Erection, Commissioning and Testing of gaseous type full gaseous chlorination system.
-
-
-
... More
Chlorinator capable to deliver 0-1000 gm/hr of chlorine gas comprising of spring opposed inlet valve, rate valve, flow meter remote ejector assembly with built in check valve, vacuum tubing , vent tubing and injection assembly.
2
-
-
... More
Booster pump set Set of 2 No. :1W+ 1SB with electric motor of make CROMPTON/KIRLOSKAR/ABB operated on 400/440 volt, 3 phase 50hz electric supply to suit ejector assembly of chlorinator, mounted on common base frame .
1
-
-
... More
Water piping from water main/UGR Set of 2 No. :1W+ 1SB to booster pump and delivery of water to elector through 20mm CPVC pipe complete with all fitting such as 20mm inlet gate valve, 20mm delivery valve, Y type strainer and solution delivery piping 20mm heavy duty PVC plumbing pipe sch 80 upto injection point before ejector assy/piping upto delivery mains. Total piping not exceeding 24 mtrs.
1
-
-
... More
Assessories/spares: Multi purpose cylinder Key-1 No. lead washers -6 Nos Ejector gasket-2 sets. Hose clips- 4 Nos. Ammonia Bottle – 50ml -1 No.
1
-
-
... More
Chlorine Cylinders:Chlorine gas Cylinder 100kg ., capacity as per BIS Duly certified by CCE Nagpur and filled with Chlorine gas
4
-
-
... More
Chlorine Leak Detector with swnsor and alarm
1
-
-
... More
Electric Panel for booster pumps & leak detector.
1
-
-
... More
Supply, installation commissioning and testing of Wi-Fi based CCTV camera security system consisting of the following ;
-
-
-
... More
DVR 8 CHANNEL WIFI
3
-
-
... More
WIFI CAMERA 2MP HD CCTV DOME
2
-
-
... More
WIFI CAMERA 2MP HD CCTV BULLET
20
-
-
... More
POWER SUPPLY 8 CHANNEL
1
-
-
... More
2 TB SURVILIANCE HARD DISK
1
-
-
... More
WALL MOUNT RACK 2 U
1
-
-
... More
D.C. PIN
8
-
-
... More
DISPLAY 32", LG/Samsung/Sony or equivalent
1
-
-
... More
HDMI
1
-
-
... More
ROUTER
3
-
-
... More
UPS 1000 VA NUMERIC
1
-
-
... More
Supplying, Comissioning and Testing of Volute Press System; Sludge Volume : 300 m3/day; SLUDGE FLOW CONTROL TANK FLOCCULATION UNIT-1 SLUDGE THICKENING UNIT -1 VOLUTE CYLINDER (DEWATERING MECHANISM) CONTROL PANEL BOARD TANKS AND HARDWARE: SS 304 AND CYLINDER: SS304
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Sludge Pumps
-
-
-
... More
Pump for Cleaning Trolly Mounted Sewerage Pump Q - 265 CuM/Hr. @ 15 MWC
2
-
-
... More
Pump for RAS Horizonatal Centrifugal Pump Q - 125 CuM/Hr. @ 55 MWC
4
-
-
... More
Pump for RAS Horizontal Centrifugal Pump Q - 5 CuM/Hr. @ 10 MWC
2
-
-
... More
Pump for filter Press Feed Sewerage Pump Q - 15 CuM/Hr. @ 60 MWC
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation for Sludge Pump
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Multi Media Filter Flow Rate: 90 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
3
-
-
... More
Supplying, Errection, Commisioning and Testing of Activated Carbon Filter Flow Rate: 90 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
3
-
-
... More
Supplying, Errection, Commisioning and Testing of Filter Feed and Filter Back wash Pumps
-
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 90 m3/hr @ 20 MWC
4
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 180 m3/hr @ 30 MWC
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Calrifier Mechanism
1. Clarifier Mechanism with Scum removal
► A central drive mechanical system for Clarifier • Size = 19.5m diameter - 3.0 m SWD (F.B = 0.5 m) ► TEFC Motor, should be fitted with speed reduction gear box through belt-pulley so as to get final R.P.H = 4app. ► Vertical Shaft = M. S seamless Hollow shaft with epoxy ► Moving raking arm (made of MS Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10.0 mm thick). ► Water immersed part should be epoxy painted. ► Gear Box, Make = Greaves or equivalent • Type/ Size -Primary Gear Box 287, Ratio = 1:60 ► Secondary Drive head • Drive Head = Belt Pulley/ Chain Sprocket 2. Central Well for Clarifier (Folding Type)
► Size of Central Well =2000 mm dia x 2000 mm height ► Thickness of Sheet = 5.0 mm ► It is stiffened by channel and Angles. ► MOC = M.S (Epoxy) 3. Skimmer with Scum Trough ► FRP Scum Baffle Plate ► Size of Baffle Plate 450 mm x 2500 mm ► Thickness of FRP = 5.0 mm 4. FRP V–Notch Clarifier FRP Scum Baffle Plate, Size of V- Notch = 160 x 1250 mm, Thickness of FRP = 5.0 mm
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Screens
-
-
-
... More
Fixed type Manual Coarse Bar Screen
Suitable for Channel Dimension
Channel Width: 750 mm
Channel Depth: 1100 mm
Water Depth : 800 mm
Bar Spacing : 40 mm
Bar Size: 10X50 mm Angle of Inclination: 60 Degree
MOC : MS
Peak Flow/screen: 4.05 MLD
2
-
-
... More
Mechanized Fine Bar Screen along with control panel Suitable for Channel Dimension
Channel Width: 750 mm
Channel Depth: 1100 mm
Water Depth : 800 mm
Bar Spacing : 6 mm
Bar Thickness: 2 mm Angle of Inclination: 40 Degree
MOC :SS-304
Peak Flow/screen: 17.4 MLD
2
-
-
... More
Cast Iron Side Wall Embedded Open Channel Gates as per JASH Standard,Size: 750 (w)mm x 1100 (h) mm, Suitable for 0.8 m Seating Water head (From Invert Level), Electrically operated, Rising Spindle, Upward opening, Flush Bottom Closing Arrangement, Closed top self contained frame gate
4
-
-
... More
Supplying, Errection, Commisioning and Testing of Flash Mixers and Agitators
-
-
-
... More
FLASH MIXER A Flash Mixing mechanism system with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. SIZE – 2.45 X 1.65 X 2m SWD Motor – 3 HP and Gear box of suitable size
1
-
-
... More
Agitators for Dosing Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Motor – 1.5 HP and Gear box of suitable size
4
-
-
... More
Agitators for HDPE Tank Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Capacity of Tank – 500 Ltrs
Motor – 1.5 HP and Gear box of suitable size
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Flocculator
-
-
-
... More
1. Paddle Flocculator ► Motor = 1.12 Kw, ► Make = CGL /ABB/KEC ► Gear Box = Suitable Size ► Make = Greaves / Elecon/ New Allenbury ► S. S - 304 Shaft, and Angle Paddle. ► Bevel Gear and Pinion arrangement ► Complete with base frame ISMC. ► Motor cover (GI / FRP) & suitable coupling.
1
-
-
... More
2. Mechanical Scraper for Clarifier (Peripheral Drive) ► A Peripheral Drive Sludge Scraper Mechanism system for Clarifier. ► Size = 21.2 m dia x 3.5 m s.w.d (F.B = 0.35 m) ► TEFC Motor = 1.5 Kw, should be fitted with speed reduction gear box through belt-pulley and Chain Sprocket so as to get final R.P.H = 4 approx. ► Vertical Cage = M. S Angle with epoxy painted. ► Bridge 1250 mm wide with railing 1.5 m (H) made of M.S Angles. ► Moving raking arm (made of MS angles / Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10 mm thick). ► Bridge should have 6 mm thick MS chequered plate or M.S Grating. ► Water immersed part should be epoxy painted. ► Epoxy Primer & Epoxy Paint on railing & bridge. ► Moving Racking Arm: Made of M.S Angle / M.S Channels fitted with blades and with quality durable neoprene rubber squeeze Pads at least 10.0 mm thick. ► Gear Box Make = Greaves/ Elecon/New Allenburry. ► Type/ Size • Primary Gear Box - Suitable Size ► Central Bearing • Drive Head = Belt Pulley/ Chain Sprocket
1
-
-
... More
3. Drive Mechanism Description:
The driving mechanism of the bridge shall comprise of one number 2.0 HP, 960 rpm TEFC motor and worm reduction gearbox. The power shall be transmitted by means of a chain sprocket arrangement which shall impact a slow motion to the MMs wheels moving on steel billet (40 mm square) track along the peripheral wall of the clarifier.
1
-
-
... More
4. Current Collector
► Electric contact gear assembly • Make of Motor = ABB/KEC/CGL.
1
-
-
... More
5. FRP V – Notch for Clarifier
► Size = 165 (H) x 1250 mm (L) ► MOC = FRP ► Thickness of FRP sheet = 5.0 mm ► Fastener (SS -304)
1
-
-
... More
6. Track / Rail for Sludge Scraper Mechanism It is clamped with M.S Angle Cleat and M.S Foundation Plate 120 x 150 x 8 mm Thick.
1
-
-
... More
7. Telescopic Valve for constant sludge withdrawal
► Size = 100 mm NB. It Consist Bush Bearing, Sludge Withdrawal Pipe (SS), Wheel (M.S), Flange and S.S – 304 Ball.
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
Equipments for test of Biological Oxygen Demand (BOD)
1
-
-
... More
Equipments for test of Chemical Oxygen Demand (COD)
1
-
-
... More
Equipments for test of Total Suspended Solids (TSS)
1
-
-
... More
Equipments for test of Ammonical Nitrogen (NH4-N)
1
-
-
... More
Equipments for test of Total Nitrogen (N-Total)
1
-
-
... More
Equipments for Fecal Coliform Test
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
CE & UL certified Master PLC in IP 54 enclosure with power supply at MCS
1
-
-
... More
Desktop / PC with i7 processor for MCS
1
-
-
... More
GSM based wireless communication system through internet connection for PLC capable to transfer and receive data and gather data from remote site to control station including all accessories signal Enhancer and antenna
1
-
-
... More
Surge Protector For Ethernet Communication protection
1
-
-
... More
CE / UL certified industrial grade Ethernet switch
1
-
-
... More
Open Channel Flow Meter
1
-
-
... More
Turbidity
1
-
-
... More
Ultrasonic Level Transmitter
1
-
-
... More
TSS
1
-
-
... More
Electromagnetic Flowmeter 200mm
1
-
-
... More
Pressure Transmitter
2
-
-
... More
COD Analyzer
1
-
-
... More
DO Analyzer
1
-
-
... More
pH Analyzer
1
-
-
... More
TDS Analyzer
1
-
-
... More
UPS - 3KVA
1
-
-
... More
Operation and Maintenance, North Disposal
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
... More
Cost of Power durind O&M, North Disposal
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
... More
Summer Hill (2)
-
-
-
... More
Summer Hill - Construction of partition wall in Aeration Tank
-
-
-
... More
Ready Concrete for Substructure (M 30 Grade) - Providing and laying cement concrete work using concrete mix of M-30 with graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work plain concrete work in : Foundation and Plinth
9.4
-
-
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
30.1
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
3953.3
-
-
... More
Plaster - Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
167.5
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
158.1
-
-
... More
Summer Hill - Construction of Filter Feed Tanks
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
231.8
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
30.9
-
-
... More
Ready Concrete for Substructure (M 30 Grade) - Providing and laying cement concrete work using concrete mix of M-30 with graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work plain concrete work in : Foundation and Plinth
53.6
-
-
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
23.3
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
7685.4
-
-
... More
Providing G.I pipe railing in 3 row 25 mm dia.
20
-
-
... More
Providing and fixing 1.2 m high railing of 40 mm dia. G.I. pipe in three rows at 40 cm C to C with vertical angle 65x65x6 mm, embedded in masonry or in concrete placed at 3 m C to C on top of weirs, dams etc. including providing M.S. plate of size 200x200x3 mm welded to the bottom of railing posts for anchorage
45.2
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
270
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
93.2
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
270
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Summer Hill - Retrofitting of Grit Settler -1
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
70.4
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
1.7
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
70.4
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
54.7
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
70.4
-
-
... More
Summer Hill - Retrofitting of AERATION TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
1893.8
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
59.3
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
1893.8
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
1005.3
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
1893.8
-
-
... More
Providing and fixing M.S Ladder
9
-
-
... More
Providing and fixing copper lighting Conductor
30
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Summer Hill - Retrofitting of SECONDARY CLARIFIER
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
2959.6
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
86.3
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
2959.6
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
1775.8
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
2959.6
-
-
... More
Providing and fixing M.S Ladder
6
-
-
... More
Providing and fixing copper lighting Conductor
20
-
-
... More
Providing and constructing C.I Cowl type ventilator
100
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Summer Hill - Retrofitting of FLASH MIXER TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
13.4
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
0.8
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
13.4
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
13.2
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
13.4
-
-
... More
Providing and fixing M.S Ladder
2
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Summer Hill - Retrofitting of CLARIFLOCCULATOR
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
1588.9
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
42.6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
1721.6
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
907.9
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
1721.6
-
-
... More
Providing and fixing M.S Ladder
3
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing and constructing C.I Cowl type ventilator
50
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Summer Hill - Retrofitting of CHEMICAL DOSING TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
62.2
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
2
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
62.2
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
56.8
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
62.2
-
-
... More
Providing and fixing M.S Ladder
12
-
-
... More
SLUDGE WELL
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
187.5
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
5.6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
187.5
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
159
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
187.5
-
-
... More
Providing and fixing M.S Ladder
12
-
-
... More
Summar Hill - Retrofitting of FILTER PRESS HOUSE
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
5
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
123.5
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
87.2
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
216
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
5
-
-
... More
Summar Hill - Retrofitting of ADMIN CUM LAB ROOM
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
4
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
109
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
80
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
179
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
4
-
-
... More
Summar Hill - Replacement of Pipes
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
334
-
-
... More
Supplying, laying, jointing,testing Centrifugally cast Ductile iron (Spun) pressure pipes confirming to IS 8329/2000 class K/7. (Earth work in Trenches to be measured and paid separately).
-
-
-
... More
Dia 200mm
185
-
-
... More
Dia 250mm
230
-
-
... More
Dia 300mm
50
-
-
... More
Dia 350mm
50
-
-
... More
Dia 400mm
25
-
-
... More
Summer Hill - Construction of Office Room
-
-
-
... More
Construction of RCC framed structure - office cum blower room in M-20 aesthetically designed, including follwing components;
Anti skit tiles, Anodized aluminium frames, doors and windows,
Interal electrical wiring, water supply, sanitary, other allied items
Septic tank or sewerline for sewage disposal required to complete the work, etc.
30
-
-
... More
Providing, Erection, Commissioning and Testing of gaseous type full gaseous chlorination system.
-
-
-
... More
Chlorinator capable to deliver 0-1000 gm/hr of chlorine gas comprising of spring opposed inlet valve, rate valve, flow meter remote ejector assembly with built in check valve, vacuum tubing , vent tubing and injection assembly.
2
-
-
... More
Booster pump set Set of 2 No. :1W+ 1SB with electric motor of make CROMPTON/KIRLOSKAR/ABB operated on 400/440 volt, 3 phase 50hz electric supply to suit ejector assembly of chlorinator, mounted on common base frame .
1
-
-
... More
Water piping from water main/UGR Set of 2 No. :1W+ 1SB to booster pump and delivery of water to elector through 20mm CPVC pipe complete with all fitting such as 20mm inlet gate valve, 20mm delivery valve, Y type strainer and solution delivery piping 20mm heavy duty PVC plumbing pipe sch 80 upto injection point before ejector assy/piping upto delivery mains. Total piping not exceeding 24 mtrs.
1
-
-
... More
Assessories/spares: Multi purpose cylinder Key-1 No. lead washers -6 Nos Ejector gasket-2 sets. Hose clips- 4 Nos. Ammonia Bottle – 50ml -1 No.
1
-
-
... More
Chlorine Cylinders:Chlorine gas Cylinder 100kg ., capacity as per BIS Duly certified by CCE Nagpur and filled with Chlorine gas
4
-
-
... More
Chlorine Leak Detector with swnsor and alarm
1
-
-
... More
Electric Panel for booster pumps & leak detector.
1
-
-
... More
Supply, installation commissioning and testing of Wi-Fi based CCTV camera security system consisting of the following ;
-
-
-
... More
DVR 8 CHANNEL WIFI
2
-
-
... More
WIFI CAMERA 2MP HD CCTV DOME
1
-
-
... More
WIFI CAMERA 2MP HD CCTV BULLET
12
-
-
... More
POWER SUPPLY 8 CHANNEL
1
-
-
... More
2 TB SURVILIANCE HARD DISK
1
-
-
... More
WALL MOUNT RACK 2 U
1
-
-
... More
D.C. PIN
8
-
-
... More
DISPLAY LED 32" LG/Samsung/Sony or equivalent
1
-
-
... More
HDMI
1
-
-
... More
ROUTER
3
-
-
... More
UPS 1000 VA NUMERIC
1
-
-
... More
Supplying, Comissioning and Testing of Diffused Aeration System, including blowers
-
-
-
... More
Twin Lobe Rotary Blower (Air Cooled Compressor)
Capacity : 3312 m3/hr. with 5000 mmwg.
3
-
-
... More
Diffusers - Retrievable Tube Type
Capacity : Avg 6.5 – 9.5 m3hr/diffuser
816
-
-
... More
FABRICATED CHANNEL IRON BASE FRAME COMMON FOR MACHINE AND ELECTRIC MOTOR
1
-
-
... More
DRIVE & DRIVEN PULLEYS
1
-
-
... More
BELT GUARD
1
-
-
... More
V-BELTS
1
-
-
... More
SUCTION & DISCHARGE SILENCER
1
-
-
... More
SUCTION FILTER
1
-
-
... More
INTERCONNECTING PIPING
1
-
-
... More
DEAD WEIGHT SAFETY VALVE
1
-
-
... More
ATTACHMENT FOR SAFETY VALVE
1
-
-
... More
NRV
1
-
-
... More
COMPANION FLANGE
1
-
-
... More
PRESSURE GAUGE
1
-
-
... More
FOUNDATION BOLTS
1
-
-
... More
Supplying, Comissioning and Testing of Volute Press System; Sludge Volume : 200 m3/day; SLUDGE FLOW CONTROL TANK FLOCCULATION UNIT-1 SLUDGE THICKENING UNIT -1 VOLUTE CYLINDER (DEWATERING MECHANISM) CONTROL PANEL BOARD TANKS AND HARDWARE: SS 304 AND CYLINDER: SS304
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Pumps
-
-
-
... More
Pump for Cleaning Trolly Mounted Sewerage Pump Q - 180 CuM/Hr. @ 15 MWC
2
-
-
... More
Pump for RAS Horizonatal Centrifugal Pump Q - 82 CuM/Hr. @ 30 MWC
4
-
-
... More
Pump for filter Press Feed Sewerage Pump Q - 15 CuM/Hr. @ 60 MWC
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation for Sludge Pump
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Multi Media Filter Flow Rate: 90 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Activated Carbon Filter Flow Rate: 90 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Filter Feed and Filter Back wash Pumps
-
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 82 m3/hr @ 20 MWC
3
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 180 m3/hr @ 30 MWC
2
-
-
... More
Supplying, Errection, Commisioning and Testing of following Items
1. Clarifier Mechanism with Scum removal
► A central drive mechanical system for Clarifier • Size = 15.85m diameter - 3.0 m SWD (F.B = 0.5 m) ► TEFC Motor, should be fitted with speed reduction gear box through belt-pulley so as to get final R.P.H = 4app. ► Vertical Shaft = M. S seamless Hollow shaft with epoxy ► Moving raking arm (made of MS Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10.0 mm thick). ► Water immersed part should be epoxy painted. ► Gear Box, Make = Greaves or equivalent • Type/ Size -Primary Gear Box 287, Ratio = 1:60 ► Secondary Drive head • Drive Head = Belt Pulley/ Chain Sprocket 2. Central Well for Clarifier (Folding Type)
► Size of Central Well =2000 mm dia x 2000 mm height ► Thickness of Sheet = 5.0 mm ► It is stiffened by channel and Angles. ► MOC = M.S (Epoxy) 3. Skimmer with Scum Trough ► FRP Scum Baffle Plate ► Size of Baffle Plate 450 mm x 2500 mm ► Thickness of FRP = 5.0 mm 4. FRP V–Notch Clarifier FRP Scum Baffle Plate, Size of V- Notch = 160 x 1250 mm, Thickness of FRP = 5.0 mm
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Screens
-
-
-
... More
Fixed type Manual Coarse Bar Screen Suitable for Channel Dimension
Channel Width: 625 mm
Channel Depth: 700 mm
Water Depth : 400 mm
Bar Spacing : 40 mm
Bar Size: 10X50 mm Angle of Inclination: 60 Degree
MOC : MS
Peak Flow/screen: 4.05 MLD
1
-
-
... More
Mechanized Fine Bar Screen, including control panel
Suitable for Channel Dimension
Channel Width: 625 mm
Channel Depth: 700 mm
Water Depth : 300 mm
Bar Spacing : 6 mm
Bar Thickness: 2 mm Angle of Inclination: 40 Degree
MOC :SS-304
Peak Flow/screen: 11.79 MLD
1
-
-
... More
Cast Iron Side Wall Embedded Open Channel Gates as per JASH Standard,Size: 625 (w)mm x 700 (h) mm, Suitable for 0.4 m Seating Water head (From Invert Level), Electrically operated, Rising Spindle, Upward opening, Flush Bottom Closing Arrangement, Closed top self contained frame gate
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Flash Mixers and Agitators
-
-
-
... More
FLASH MIXER A Flash Mixing mechanism system with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. SIZE – 1.2 X 1.2 X 2m SWD Motor – 2 HP and Gear box of suitable size
1
-
-
... More
Agitators for Dosing Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Motor – 1.5 HP and Gear box of suitable size
4
-
-
... More
Agitators for HDPE Tank Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Capacity of Tank – 500 Ltrs
Motor – 1.5 HP and Gear box of suitable size
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
1. Paddle Flocculator ► Motor = 1.12 Kw, ► Make = CGL /ABB/KEC ► Gear Box = Suitable Size ► Make = Greaves / Elecon/ New Allenbury ► S. S - 304 Shaft, and Angle Paddle. ► Bevel Gear and Pinion arrangement ► Complete with base frame ISMC. ► Motor cover (GI / FRP) & suitable coupling.
1
-
-
... More
2. Mechanical Scraper for Clarifier (Peripheral Drive) ► A Peripheral Drive Sludge Scraper Mechanism system for Clarifier. ► Size = 17.1 m dia x 3.5 m s.w.d (F.B = 0.35 m) ► TEFC Motor = 1.5 Kw, should be fitted with speed reduction gear box through belt-pulley and Chain Sprocket so as to get final R.P.H = 4 approx. ► Vertical Cage = M. S Angle with epoxy painted. ► Bridge 1250 mm wide with railing 1.5 m (H) made of M.S Angles. ► Moving raking arm (made of MS angles / Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10 mm thick). ► Bridge should have 6 mm thick MS chequered plate or M.S Grating. ► Water immersed part should be epoxy painted. ► Epoxy Primer & Epoxy Paint on railing & bridge. ► Moving Racking Arm: Made of M.S Angle / M.S Channels fitted with blades and with quality durable neoprene rubber squeeze Pads at least 10.0 mm thick. ► Gear Box Make = Greaves/ Elecon/New Allenburry. ► Type/ Size • Primary Gear Box - Suitable Size ► Central Bearing • Drive Head = Belt Pulley/ Chain Sprocket
1
-
-
... More
3. Drive Mechanism Description:
The driving mechanism of the bridge shall comprise of one number 2.0 HP, 960 rpm TEFC motor and worm reduction gearbox. The power shall be transmitted by means of a chain sprocket arrangement which shall impact a slow motion to the MMs wheels moving on steel billet (40 mm square) track along the peripheral wall of the clarifier.
1
-
-
... More
4. Current Collector
► Electric contact gear assembly • Make of Motor = ABB/KEC/CGL.
1
-
-
... More
5. FRP V – Notch for Clarifier
► Size = 165 (H) x 1250 mm (L) ► MOC = FRP ► Thickness of FRP sheet = 5.0 mm ► Fastener (SS -304)
1
-
-
... More
6. Track / Rail for Sludge Scraper Mechanism It is clamped with M.S Angle Cleat and M.S Foundation Plate 120 x 150 x 8 mm Thick.
1
-
-
... More
7. Telescopic Valve for constant sludge withdrawal
► Size = 100 mm NB. It Consist Bush Bearing, Sludge Withdrawal Pipe (SS), Wheel (M.S), Flange and S.S – 304 Ball.
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
Equipments for test of Biological Oxygen Demand (BOD)
1
-
-
... More
Equipments for test of Chemical Oxygen Demand (COD)
1
-
-
... More
Equipments for test of Total Suspended Solids (TSS)
1
-
-
... More
Equipments for test of Ammonical Nitrogen (NH4-N)
1
-
-
... More
Equipments for test of Total Nitrogen (N-Total)
1
-
-
... More
Equipments for Fecal Coliform Test
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
CE & UL certified Master PLC in IP 54 enclosure with power supply at MCS
1
-
-
... More
Desktop / PC with i7 processor for MCS
1
-
-
... More
GSM based wireless communication system through internet connection for PLC capable to transfer and receive data and gather data from remote site to control station including all accessories signal Enhancer and antenna
1
-
-
... More
Surge Protector For Ethernet Communication protection
1
-
-
... More
CE / UL certified industrial grade Ethernet switch
1
-
-
... More
Open Channel Flow Meter
1
-
-
... More
Turbidity
1
-
-
... More
Ultrasonic Level Transmitter
1
-
-
... More
TSS
1
-
-
... More
Electromagnetic Flowmeter 250mm
1
-
-
... More
Pressure Transmitter
2
-
-
... More
Chlorine Analyzer
1
-
-
... More
COD Analyzer
1
-
-
... More
DO Analyzer
1
-
-
... More
pH Analyzer
1
-
-
... More
TDS Analyzer
1
-
-
... More
UPS - 3KVA
1
-
-
... More
Operation and Maintenance, Summer Hill
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
... More
Cost of Power durind O&M, Summer Hill
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
... More
Snow Down (3)
-
-
-
... More
Snow Down- Construction of partition wall in Aeration Tank
-
-
-
... More
Ready Concrete for Substructure (M 30 Grade) - Providing and laying cement concrete work using concrete mix of M-30 with graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work plain concrete work in : Foundation and Plinth
7
-
-
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
24
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
3087
-
-
... More
Plaster - Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
131
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
124
-
-
... More
Snow Down- Construction of Filter Feed Tanks
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
90
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
12
-
-
... More
Ready Concrete for Substructure (M 30 Grade) - Providing and laying cement concrete work using concrete mix of M-30 with graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work plain concrete work in : Foundation and Plinth
22
-
-
... More
R.C.C work (M30) For Superstructure - Providing and laying cement concrete (M-30) work and curing complete excluding cost of from work and reinforcement for reinforced concrete work in Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level
14
-
-
... More
Steel Reinforcement (fe 500) - Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
3577
-
-
... More
Providing G.I pipe railing in 3 row 25 mm dia.
20
-
-
... More
Providing and fixing 1.2 m high railing of 40 mm dia. G.I. pipe in three rows at 40 cm C to C with vertical angle 65x65x6 mm, embedded in masonry or in concrete placed at 3 m C to C on top of weirs, dams etc. including providing M.S. plate of size 200x200x3 mm welded to the bottom of railing posts for anchorage
30
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
127
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
55
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
127
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Snow Down - Retrofitting of Grit Settler -1
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
50
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
1
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
50
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
46
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
50
-
-
... More
Snow Down - Retrofitting of AERATION TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
926
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
12
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
926
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
523
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
926
-
-
... More
Providing and fixing M.S Ladder
6
-
-
... More
Providing and fixing copper lighting Conductor
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Snow Down - Retrofitting of SECONDARY CLARIFIER
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
1026
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
12
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
1026
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
616
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
1026
-
-
... More
Providing and fixing M.S Ladder
3
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing and constructing C.I Cowl type ventilator
50
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Snow Down - Retrofitting of FLASH MIXER TANKS
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
50
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
1
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
7
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
7
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
7
-
-
... More
Providing and fixing M.S Ladder
2
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Snow Down - Retrofitting of CLARIFLOCCULATOR
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
7
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
641
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
333
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
641
-
-
... More
Providing and fixing M.S Ladder
3
-
-
... More
Providing and fixing copper lighting Conductor
10
-
-
... More
Providing and constructing C.I Cowl type ventilator
50
-
-
... More
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 6 Kg/sq.cm - 200 mm dia
20
-
-
... More
Providing 250mm dia DI pipe for scouring
30
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc. (the tail pieces if required will be paid separately) : 250mm Class II
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
SLUDGE WELL
-
-
-
... More
Cleaning of Tanks - Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
188
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
6
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
188
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
159
-
-
... More
Water Proofing - Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
188
-
-
... More
Providing and fixing M.S Ladder
12
-
-
... More
Snow Down - Retrofitting of FILTER PRESS HOUSE
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
4
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
96
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
71
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
176
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
4
-
-
... More
Snow Down - Retrofitting of ADMIN CUM LAB ROOM
-
-
-
... More
Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Foundations, footings bases of columns and the like and mass concrete.
4
-
-
... More
Internal Plaster 20 mm thick in CM 1:4 - 20 mm cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4) (1 cement: 4 sand)
106
-
-
... More
External Plaster - 15 mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rorunded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar (1:4)
79
-
-
... More
Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undercoated wall surface (Two Coats) to give an even shade after throughly brushing the surface to remove all dirst and remains of loose powdered materials.
175
-
-
... More
Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.
4
-
-
... More
Snow Down - Replacement of Pipes
-
-
-
... More
Excavation in foundation and trenches etc.(in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer –in-charge in all leads and lifts.
37
-
-
... More
Supplying, laying, jointing,testing Centrifugally cast Ductile iron (Spun) pressure pipes confirming to IS 8329/2000 class K/7. (Earth work in Trenches to be measured and paid separately).
-
-
-
... More
Dia 150mm
120
-
-
... More
Dia 200mm
30
-
-
... More
Snow Down- Construction of Office cum Blower Room
-
-
-
... More
Construction of RCC framed structure - office cum blower room in M-20 aesthetically designed, including follwing components;
Anti skit tiles, Anodized aluminium frames, doors and windows,
Interal electrical wiring, water supply, sanitary, other allied items
Septic tank or sewerline for sewage disposal required to complete the work, etc.
48
-
-
... More
Providing, Erection, Commissioning and Testing of gaseous type full gaseous chlorination system.
-
-
-
... More
Chlorinator capable to deliver 0-1000 gm/hr of chlorine gas comprising of spring opposed inlet valve, rate valve, flow meter remote ejector assembly with built in check valve, vacuum tubing , vent tubing and injection assembly.
2
-
-
... More
Booster pump set Set of 2 No. :1W+ 1SB with electric motor of make CROMPTON/KIRLOSKAR/ABB operated on 400/440 volt, 3 phase 50hz electric supply to suit ejector assembly of chlorinator, mounted on common base frame .
1
-
-
... More
Water piping from water main/UGR Set of 2 No. :1W+ 1SB to booster pump and delivery of water to elector through 20mm CPVC pipe complete with all fitting such as 20mm inlet gate valve, 20mm delivery valve, Y type strainer and solution delivery piping 20mm heavy duty PVC plumbing pipe sch 80 upto injection point before ejector assy/piping upto delivery mains. Total piping not exceeding 24 mtrs.
1
-
-
... More
Assessories/spares: Multi purpose cylinder Key-1 No. lead washers -6 Nos Ejector gasket-2 sets. Hose clips- 4 Nos. Ammonia Bottle – 50ml -1 No.
1
-
-
... More
Chlorine Cylinders:Chlorine gas Cylinder 100kg ., capacity as per BIS Duly certified by CCE Nagpur and filled with Chlorine gas
4
-
-
... More
Chlorine Leak Detector with swnsor and alarm
1
-
-
... More
Electric Panel for booster pumps & leak detector.
1
-
-
... More
Supply, installation commissioning and testing of Wi-Fi based CCTV camera security system consisting of the following ;
-
-
-
... More
DVR 8 CHANNEL WIFI
1
-
-
... More
WIFI CAMERA 2MP HD CCTV DOME
1
-
-
... More
WIFI CAMERA 2MP HD CCTV BULLET
7
-
-
... More
POWER SUPPLY 8 CHANNEL
1
-
-
... More
2 TB SURVILIANCE HARD DISK
1
-
-
... More
WALL MOUNT RACK 2 U
1
-
-
... More
D.C. PIN
8
-
-
... More
DISPLAY LED 32" LG/Samsung/Sony or equivalent
1
-
-
... More
HDMI
1
-
-
... More
ROUTER
3
-
-
... More
UPS 1000 VA NUMERIC
1
-
-
... More
Supplying, Comissioning and Testing of Diffused Aeration System, including blowers
-
-
-
... More
Twin Lobe Rotary Blower (Air Cooled Compressor)
Capacity : 1150 m3/hr. with 5000 mmwg.
3
-
-
... More
Diffusers - Retrievable Tube Type
Capacity : Avg 6.5 – 9.5 m3hr/diffuser
300
-
-
... More
FABRICATED CHANNEL IRON BASE FRAME COMMON FOR MACHINE AND ELECTRIC MOTOR
1
-
-
... More
DRIVE & DRIVEN PULLEYS
1
-
-
... More
BELT GUARD
1
-
-
... More
V-BELTS
1
-
-
... More
SUCTION & DISCHARGE SILENCER
1
-
-
... More
SUCTION FILTER
1
-
-
... More
INTERCONNECTING PIPING
1
-
-
... More
DEAD WEIGHT SAFETY VALVE
1
-
-
... More
ATTACHMENT FOR SAFETY VALVE
1
-
-
... More
NRV
1
-
-
... More
COMPANION FLANGE
1
-
-
... More
PRESSURE GAUGE
1
-
-
... More
FOUNDATION BOLTS
1
-
-
... More
Supplying, Comissioning and Testing of Volute Press System; Sludge Volume : 80 m3/day; SLUDGE FLOW CONTROL TANK FLOCCULATION UNIT-1 SLUDGE THICKENING UNIT -1 VOLUTE CYLINDER (DEWATERING MECHANISM) CONTROL PANEL BOARD TANKS AND HARDWARE: SS 304 AND CYLINDER: SS304
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Pumps
-
-
-
... More
Pump for Cleaning Trolly Mounted Sewerage Pump Q - 62 CuM/Hr. @ 15 MWC
2
-
-
... More
Pump for RAS Horizonatal Centrifugal Pump Q - 32 CuM/Hr. @ 12 MWC
2
-
-
... More
Pump for filter Press Feed Sewerage Pump Q - 6 CuM/Hr. @ 60 MWC
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation
2
-
-
... More
Control Panel include the Contactor, relay & Other items including pressure switch For Automation for Sludge Pump
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Multi Media Filter Flow Rate: 60 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Activated Carbon Filter Flow Rate: 60 M3/Hr, MOC : MS Vessel with Epoxy coated, Type : Vertical
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Filter Feed and Filter Back wash Pumps
-
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 60 m3/hr @ 20 MWC
2
-
-
... More
Horizontal centrifugal, non-clog, self-priming pump - 120 m3/hr @ 30 MWC
2
-
-
... More
Supplying, Errection, Commisioning and Testing of following Items
1. Clarifier Mechanism with Scum removal
► A central drive mechanical system for Clarifier • Size = 13.2m diameter - 3.0 m SWD (F.B = 0.5 m) ► TEFC Motor, should be fitted with speed reduction gear box through belt-pulley so as to get final R.P.H = 4app. ► Vertical Shaft = M. S seamless Hollow shaft with epoxy. ► Moving raking arm (made of MS Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10.0 mm thick). ► Water immersed part should be epoxy painted. ► Gear Box Make = Greaves or equivalent. • Type/ Size -Primary Gear Box 287, Ratio = 1:60 ► Secondary Drive head • Drive Head = Belt Pulley/ Chain Sprocket. 2. Central Well for Clarifier (Folding Type)
► Size of Central Well =2000 mm dia x 2000 mm height ► Thickness of Sheet = 5.0 mm ► It is stiffened by channel and Angles. ► MOC = M.S (Epoxy) 3. Skimmer with Scum Trough ► FRP Scum Baffle Plate ► Size of Baffle Plate 450 mm x 2500 mm ► Thickness of FRP = 5.0 mm 4. FRP V–Notch Clarifier FRP Scum Baffle Plate, Size of V- Notch = 160 x 1250 mm, Thickness of FRP = 5.0 mm
1
-
-
... More
Supplying, Errection, Commisioning and Testing of Screens
-
-
-
... More
Fixed type Manual Coarse Bar Screen Suitable for Channel Dimension
Channel Width: 500 mm
Channel Depth: 850 mm
Water Depth : 550 mm
Bar Spacing : 40 mm
Bar Size: 10X50 mm Angle of Inclination: 60 Degree
MOC : MS
Peak Flow/screen: 4.05 MLD
1
-
-
... More
Mechanized Fine Bar Screen, including control panel Suitable for Channel Dimension
Channel Width: 500 mm
Channel Depth: 850 mm
Water Depth : 550 mm
Bar Spacing : 6 mm
Bar Thickness: 2 mm Angle of Inclination: 40 Degree
MOC :SS-304
Peak Flow/screen: 4.05 MLD
1
-
-
... More
Cast Iron Side Wall Embedded Open Channel Gates as per JASH Standard,Size: 500 (w)mm x 850 (h) mm, Suitable for 0.55 m Seating Water head (From Invert Level), Electrically operated, Rising Spindle, Upward opening, Flush Bottom Closing Arrangement, Closed top self contained frame gate
2
-
-
... More
Supplying, Errection, Commisioning and Testing of Flash Mixers and Agitators
-
-
-
... More
FLASH MIXER A Flash Mixing mechanism system with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. SIZE – 0.8 X 0.8 X 1.5 m SWD Motor – 1 HP and Gear box of suitable size
1
-
-
... More
Agitators for Dosing Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Motor – 1.5 HP and Gear box of suitable size
4
-
-
... More
Agitators for HDPE Tank Tank
Agitators with Shaft & impellor in SS 316 along with bush & bearing complete with required base frame in ISMC, motor cover in GI or FRP & suitable coupling. Capacity of Tank – 500 Ltrs
Motor – 1.5 HP and Gear box of suitable size
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
1. Paddle Flocculator ► Motor = 0.75 Kw, ► Make = CGL /ABB/KEC ► Gear Box = Suitable Size ► Make = Greaves / Elecon/ New Allenbury ► S. S - 304 Shaft, and Angle Paddle. ► Bevel Gear and Pinion arrangement ► Complete with base frame ISMC. ► Motor cover (GI / FRP) & suitable coupling.
1
-
-
... More
2. Mechanical Scraper for Clarifier (Peripheral Drive) ► A Peripheral Drive Sludge Scraper Mechanism system for Clarifier. ► Size = 10.3 m dia x 3.5 m s.w.d (F.B = 0.35 m) ► TEFC Motor = 1.5 Kw, should be fitted with speed reduction gear box through belt-pulley and Chain Sprocket so as to get final R.P.H = 4 approx. ► Vertical Cage = M. S Angle with epoxy painted. ► Bridge 1250 mm wide with railing 1.5 m (H) made of M.S Angles. ► Moving raking arm (made of MS angles / Channels) fitted with scrapper blades & neoprene rubber squeeze pads (at least 10 mm thick). ► Bridge should have 6 mm thick MS chequered plate or M.S Grating. ► Water immersed part should be epoxy painted. ► Epoxy Primer & Epoxy Paint on railing & bridge. ► Moving Racking Arm: Made of M.S Angle / M.S Channels fitted with blades and with quality durable neoprene rubber squeeze Pads at least 10.0 mm thick. ► Gear Box Make = Greaves/ Elecon/New Allenburry. ► Type/ Size • Primary Gear Box - Suitable Size ► Central Bearing • Drive Head = Belt Pulley/ Chain Sprocket
1
-
-
... More
3. Drive Mechanism Description:
The driving mechanism of the bridge shall comprise of one number 2.0 HP, 960 rpm TEFC motor and worm reduction gearbox. The power shall be transmitted by means of a chain sprocket arrangement which shall impact a slow motion to the MMs wheels moving on steel billet (40 mm square) track along the peripheral wall of the clarifier.
1
-
-
... More
4. Current Collector
► Electric contact gear assembly • Make of Motor = ABB/KEC/CGL.
1
-
-
... More
5. FRP V – Notch for Clarifier
► Size = 165 (H) x 1250 mm (L) ► MOC = FRP ► Thickness of FRP sheet = 5.0 mm ► Fastener (SS -304)
1
-
-
... More
6. Track / Rail for Sludge Scraper Mechanism It is clamped with M.S Angle Cleat and M.S Foundation Plate 120 x 150 x 8 mm Thick.
1
-
-
... More
7. Telescopic Valve for constant sludge withdrawal
► Size = 80 mm NB. It Consist Bush Bearing, Sludge Withdrawal Pipe (SS), Wheel (M.S), Flange and S.S – 304 Ball.
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
Equipments for test of Biological Oxygen Demand (BOD)
1
-
-
... More
Equipments for test of Chemical Oxygen Demand (COD)
1
-
-
... More
Equipments for test of Total Suspended Solids (TSS)
1
-
-
... More
Equipments for test of Ammonical Nitrogen (NH4-N)
1
-
-
... More
Equipments for test of Total Nitrogen (N-Total)
1
-
-
... More
Equipments for Fecal Coliform Test
1
-
-
... More
Supplying, Errection, Commisioning and Testing of following items;
-
-
-
... More
CE & UL certified Master PLC in IP 54 enclosure with power supply at MCS
1
-
-
... More
Desktop / PC with i7 processor for MCS
1
-
-
... More
GSM based wireless communication system through internet connection for PLC capable to transfer and receive data and gather data from remote site to control station including all accessories signal Enhancer and antenna
1
-
-
... More
Surge Protector For Ethernet Communication protection
1
-
-
... More
CE / UL certified industrial grade Ethernet switch
1
-
-
... More
Open Channel Flow Meter
1
-
-
... More
Turbidity
1
-
-
... More
Ultrasonic Level Transmitter
1
-
-
... More
TSS
1
-
-
... More
Electromagnetic Flowmeter 250mm
1
-
-
... More
Pressure Transmitter
2
-
-
... More
Chlorine Analyzer
1
-
-
... More
COD Analyzer
1
-
-
... More
DO Analyzer
1
-
-
... More
pH Analyzer
1
-
-
... More
TDS Analyzer
1
-
-
... More
UPS - 3KVA
1
-
-
... More
Operation and Maintenance, Snow Down
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
... More
Cost of Power durind O&M, Snow Down
-
-
-
... More
2nd Year (1st year of O&M)
1
-
-
... More
3rd Year (2nd year of O&M)
1
-
-
... More
4th Year (3rd year of O&M)
1
-
-
... More
5th Year (4th year of O&M)
1
-
-
... More
6th Year (5th year of O&M)
1
-
-
... More
7th Year (6th year of O&M)
1
-
-
... More
8th Year (7th year of O&M)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements