The Himachal Pradesh State Industrial Development Corporation Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
The Himachal Pradesh State Industrial Development Corporation Limited - HPSIDC Tender
Eprocure
Opening Date28 Apr 2021
Closing Date5 May 2021
Tender Amount₹ 47,07,696
Costs
EMD
₹ 67,800Document Cost
₹ 4,600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_SIDC_46919_1Bid Award Id
ViewTender No
Job No. 4Tender Authority
The Himachal Pradesh State Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(C). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.
123.6
-
-
(D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness.
153.52
-
-
Providing and laying cement concrete 1:6:12 (one cement :six sand :twelve graded stone aggregate 40mm nominal size)(Forty milimetre) and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads and lifts.
3.08
-
-
Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundations, footings, bases of columns and the like and mass concrete.
4.1
-
-
(b). Columns, pillars, posts and struts in all floor levels.
4.64
-
-
(c). Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels.
34.35
-
-
Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge.
6463.5
-
-
Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts.
13.27
-
-
Brick work using common burnt clay building bricks in superstructure 1:6 (1cement : 6sand) including carriage of material within all leads and lifts.
35.14
-
-
Half brick work using common burnt clay building bricks in super structure above plinth level upto floor all level using second class building bricks in cement mortar 1:4 (1cement : 4sand) including carriage of materials within all leads and lifts and as per the direction of Engineer in charge.
45
-
-
6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (1 Cement 3 Sand) in all floor level including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
154.74
-
-
15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
211.2
-
-
15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth within cement mortar 1:6 (1 Cement 6 Sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
160.3
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts.
526.24
-
-
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials within all leads and lifts
365.94
-
-
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials within all leads and lifts.
293.3
-
-
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
39.27
-
-
Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With enamel paint other than white including carriage of materials within all leads and lifts.
30.24
-
-
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty doublecharged vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads and lifts.
111.95
-
-
Providing and fixing 90cm high Stain less Steel 304 No. railing for stair case having Bluster 50mm dia. Jointing in steps with electronic gas welding with 3 rows of 20mm dia and top row with 50mm dia and master piece of 150mm dia. At junction complete in all respect including carriage of material with in all lead and lift.
5
-
-
Coloured Digital/ glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado nitco/orient or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (1 cement 3 sand) and jointed with cement slurry including carriage of material within all leads and lifts as per directions of the Engineer-in-Charge.
98.28
-
-
Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including carriage of materials within all leads and lifts.
13.95
-
-
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars ,ladders, railling, brackets and similar works including carriage of materials within all leads and lifts.
800
-
-
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. including carriage of materials within all leads and lifts.
10.1
-
-
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100mm dia pipes including carriage of materials within all leads and lifts
32
-
-
Finishing with floating coat of neat cement slurry including carriage of materials within all leads and lifts
28.8
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts
8.75
-
-
Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of material within all leads and lifts.
3
-
-
Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including carriage of materials within all leads and lifts
5
-
-
Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore.
18
-
-
20 mm nominal bore.
12
-
-
Making connection of galvainised steel distribution branch with galvainised mild steel main 20mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of material within all leads and lifts.
3
-
-
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia including carriage of materials within all leads and lifts.
60
-
-
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts . Plain bend 110 mm nominal size including carriage of materials within all leads and lifts .
14
-
-
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia including carriage of materials within all leads and lifts
4
-
-
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials within all leads and lifts
4
-
-
Providing and fixing Vitreous china wash down, water closet ( European type W.C pan) Cream shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 Cement :1 Sand ) ( Seat and over to be measured and paid for separately) including carriage of material within all leads and lifts. Ordinary closet.
1
-
-
Providing and fixing 10.00/12.50/15.00 ltrs vitreious china low level flushing cistern with a pair of CI or mild steel brackets complete with fittings such as lead valve less syphon,15mm nominal size brass ball valve with polythene float ,CP bras handle,unions and couplings for connections with inlet,out let and over flow pipe 40mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet(over flow pipe to be measured and paid for separetly approved make) including carriage of material within all leads and lifts.
1
-
-
Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of material within all leads and lifts.
1
-
-
Providing and fixing Vanity Cum Wash Basin along with ceramic basin 600 mm in length Mirror suspended cabinet and open storage space on side/below the mirror, wash basin water tap mixture complete in all respects including carriage of materials within all leads and lifts.
1
-
-
Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of material within all leads and lifts
2
-
-
Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of material within all leads and lifts..
4
-
-
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts.
1
-
-
Providing and fixing CP brass bib tap with capastan head 15 mm dia. weight should not be less than 550gm including carriage of material within all leads and lifts.
4
-
-
Providing and fixing CP brass pillar tap with capstan head 15 mm dia weight should not be less than 550gm including carriage of material within all leads and lifts.
3
-
-
Providing and fixing CP stop cock 15mm diaweight should not be less than 550gm . including carriage of material within all leads and lifts.
6
-
-
Providing and fixing CP connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lifts.
4
-
-
Providing and fixing brass full way valve with wheel including carriage of material within all leads and lifts. ( I) 20mm nominal bore with Minimum Weight of 550Gm
2
-
-
Providing and fixing GI or MI union including carriage of material within all leads and lifts. (1)15mm nominal size
2
-
-
II) 20mm Nominal size
2
-
-
Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts..
1
-
-
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 510 mm with bowl depth 200 mm including carriage of materials within all leads and lifts
1
-
-
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank including carriage of material within all leads and lifts.
1
-
-
Providing and fixing Zet connection complete in all respcet 15 mm Dia including carriage of material within all leads and lifts.
1
-
-
Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. (I) White plastic seat and cover.
1
-
-
Providing and fixing white glazed fire clay stall urinal of 1150mmx500mm size of approved Make including carriage of material within all leads and lifts.
1
-
-
Providing and Laying Brushbond Acrylic Polymer Modified Water Proofing Membrane for Concrete Sufraces (approved Make) as per Manufacturers Specifications at all Heights / Levels / Locations and will be Executed as per directions of Engineer in Charge (all storeys / levels/ location & heights) including carriage of materials within all leads and lifts
138.25
-
-
Providing and Fixing in Position approved Qualtiy Tiles Over RCC Roofs on a base of 12mm thick. Cement Mortar 1:4 with Continuous, Regular, Straight Grooves Both Ways (3mm Wide and 2mm Deep) with White Coloured Pavit Make Eco Tiles of Size (300 X300 X 10mm) used for Reducing the Heat Radiation on Roof Surface and Cool Down the Temprature of Area beneath. Eco Tile with SRI (Solar Reflectance index) Value 86 to Reduce Heat on the Surface to be used, When Solar Radiation Is incident on their Surface. the Rate Quoted will be for Work at all Heights / Levels / Locations and will be Executed as per Manufaturers Specifications including the Cost of all Types of Operations & materials. the Grooves to be Filled Properly with Epoxy Grout, Whole Work will be done as per the Direction of the Engineer in Charge.( rate should including cost of epoxy grout) including carriage of materials within all leads and lifts
138.25
-
-
Supplying and installing Roller blinds of approved make, model and shade at all heights and location and required width and comprising of approved shade and quality fabric, 1 mm thick anodized extruded Aluminium alloy roller tube of 38- mm O.D , a bidirectional operating Clutch mechanism designed for adjustment-free, slippage-free, crash proof smooth operation for all heights, high strength fiber glass reinforced polyester idler, powder coated steel Insert type brackets fitted with roller tube, round bottom rail, control unit engrooved with a Ball Pitch of minimum 6.5mm, Stainless Steel Ball Chain, and powder coated atomized steel installation brackets. The clutch mechanism comprises of a SS beaded chain and carbon steel spring wrapped by means of a high strength fiber glass reinforced polyester assembly to transmit motion from driving to driven members. The installation brackets shall facilitate overhead, side or face mounting with clutch assembly on either end of the roller. Idler shall consist of a centre shaft and outside sleeve which provide bearing surface for roller tube and rotate freely on centre shaft for smooth and quiet operation.Manual Roller Blinds Composition- 30% Polyester (max),70% PVC on Polyester(min),Openness factor- 3-5%(as approved) Weight (gram/ sqm)- min 440 gm/sqm Thickness- min 0.60 mm Fire Classification- Class A( NFPA 101 or Class 1 (UNE EN 13773) or equivalent as per relevant standards and specifications Fastness to light- 6-7/8 or higher Fastness to light- 6-7/8 or higher Indoor Air Quality- GreenGuard / Eco-Codice CertifiedManufacturer's warrantee- minimum 5 years including carriage of materials within all leads and lifts.
12.24
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I including carriage of materials within all leads and lifts .
64.8
-
-
Providing and fixing false ceiling at all height with 600x600mm X 15 mm thick Acoustical tiles of approved shade and make with square edges made of fibre glass substrate.The tiles should have Humidity Resistance (RH) of 95%, NRC 0.90, Light Reflectance 88%, Thermal Conductivity k = 0.032 w/m K, Colour White & black, Fire Performance Class 0/ Class 1 (BS476 Class 6&7) including providing and fixing of frame work made of special sections of “Armstrong” make suprafine 15mm, complete in all respects and to the entire satisfaction of the Engineer-in-charge/ consultant / architect including carriage of materials within all leads and lifts
33.6
-
-
Providing and fixing commercial ply at all heights of required thickness for plain lining/ cladding with necessary screw, priming coat on un-exposed surface complete as per drawing and direction of Engineer-in-Charge. approved make 12mm thick to the entire satisfation of Engineer in charge including carriage of materials within all leads and lifts . .
50.89
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of materials within all leads and lifts . .
10.6
-
-
Providing and fixing factory made uPVC door frame double rebate of required colour & shade of size 50mmx95mm with a wall thickness of 5mm made by jointing 3 Nos heat bent PVC sheet C chanel of 5mm PVC foam sheet of sizes 35x30x25mm and 40x35x40mm & 25mmx30mmx35mm for jointing using solvent cement. the two side C channels shall be reinforced with 19mmx19mm M.S. square tube of 19 gauge and all the three "C" channels shall be fixed to flat base of 5mm thick PVC sheet with salvent cement. the profile shall be mitred at corners and joined by inserting 4 nos 150mm long bracket of 15mmx15mm M.S. square tube to inner side. the 19mmx19mm M.S. square tubes the door frame shall be fixed to wall with 100mm long M.S. screws to wooden or rawl plugs embedded in masonry complete as per the specification of manufactures & direction of Engineer -in-charge including carriage of materials within all leads and lifts . .
15
-
-
Providing and fixing factory made uPVC door frame single rebate of any clours of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm long brackets of 15mmx15mm M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm M.S. square tube of 19 gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100long with wooden or rawl plugs emedded in masonry complete as per manufactures specification & direction of Engineer-in-Charge including carriage of materials within all leads and lifts . .
12.4
-
-
Providing and fixing to existing door frames, 30mm thick factory made uPVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm for styles and 15mmx15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tappred in 45 degree angle on either side forming style and 5mm thick, 95mm wide, PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm size with necessary screws zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear etc complete including carriage of materials within all leads and lifts . .
9.24
-
-
Providing and fixing to existing door frames 30mm thick factory made wire mesh solid PVC door shutters consisting of frame made out of M.S. tube of 19 gauge thickness of size 19mmx19mm for style and 15mmx15mm M.S. square tube for top, bottom & Lock rail M.S. frame shall have & coat of steel primer and covered with 5mm thick PVC solid sheet heat moulded "C" channel of size 75mmx30mmx60mm out of which 10mm shall be bent at 90degree towards inner side on front face of the door M.S. frame at lock rail shall be covered with 100mm wide PVC sheet out of which 10mm on both the edges shall be bent at 90 degree on front face of the door and 85mm wide PVC sheet shall cover the M.S. frame at top, bottom & lock rail lof 70mm on back side of door 5mm thick 20mm wide cross PVC sheet as gap insert for top and bottom rail, PVC sheet beading of 10mm thick, 15mm wide PVC sheet beading in to be stick internally in the back side of style and rails of door with solvent cement adhesive i/c fixing of G.I. wire mesh 85G or 0.56 dia wire fixed between PVC sheet of style and rail bent at 90 degree on front face using 15mmx15mm L-shape PVC beading nailed on style a rails i/c fixing shutter to existing door frame with M.S. butt hinges 100x58x1.90mm with necessary screws, zinc alloy (white powder coated) hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear etc. complete including carriage of materials within all leads and lifts.
5.04
-
-
Providing and fixing glazing in upvc door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge glazing with glass panes of 5.50 mm thickness (Weight not less than 13.75 kg/sqm.) including carriage of materials within all leads and lifts
24.12
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) including carriage of materials within all leads and lifts.
12.96
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) including carriage of materials within all leads and lifts.
15.12
-
-
Providing and fixing galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading of aluminium including carriage of material within all leads and lifts.
12.96
-
-
SUB HEAD -ELECTRICAL INSTALLATION: RECESSED CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16 / 20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- including carriage of materials within all leads and lifts (i) LIGHT POINT (WITH SWITCH)
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.(ONE LIGHT POINT CONTROLLED BY ONE 6a SWITCH) including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge
20
-
-
LIGHT POINT (WITHOUT SWITCH)
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete without switch including carriage of materials within all leads and lifts .
22
-
-
CALL BELL
Wiring call-bell point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coate including carriage of materials within all leads and lifts .
2
-
-
Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification .
20
-
-
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch including carriage of materials within all leads and lifts . .
6
-
-
TELEPHONE POINTS
Wiring Telephone socket points in powder coated/anodized concealed metal boxes recessed in wall /floor required for suitable number of modules, Telephone sockets RJ -11 (one module) etc., and covered with Frame Plate etc., & including carriage of materials within all leads and lifts . Telephone socket point RJ-11 (One Module), GI Box, cover plate etc including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification .
4
-
-
PVC CONDUIT
Supply & erection of PVC pipe (fire retardent) for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:- including carriage of materials within all leads and lifts . Heavy gauge PVC conduit pipe 25 mm dia (ISI marked ) (Flushed) and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification .
60
-
-
Heavy gauge PVC conduit pipe 32 mm dia (ISI marked ) (Flushed)
15
-
-
Heavy gauge PVC conduit pipe 40 mm dia (ISI marked) (Flushed)
12
-
-
Heavy gauge PVC conduit pipe 50 mm dia (ISI marked ) (Flushed)
6
-
-
FLEXIBLE PIPE
Supply and erection of PVC flexible pipe complete with compression glands, having locking arrangement, check-nuts as required including carriage of materials within all leads and lifts . PVC Flexible pipe 25 mm dia.
50
-
-
PVC Flexible pipe 32 mm dia
15
-
-
COPPER WIRES
Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. All circuit wire need to be ferruled at both end.(I) PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.0 sq.mm, 1100volts grade (Green) and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification .
200
-
-
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade (Red, Yellow, Blue & Black)
200
-
-
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade (Red, Yellow, Blue & Black)
350
-
-
S/I/T/C of PVC insulated FRLS copper armoured conductor cable ISI marked laid through pipe/tray of size 6 sq mm (for lighting DB)
30
-
-
S/I/T/C of PVC insulated FRLS copper armoured conductor cable ISI marked laid through pipe/tray of size 4 x 10 sq mm (for PDB & UPD DB)
60
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surfaces/recessed PVC conduit/Raceway as required. All wire need to be ferruled on both ends including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification . . 1 Pair
40
-
-
4 Pair
40
-
-
S/I/T/C of 40 Pair Telephone Tag Block Crone type
1
-
-
Supply and erection of switches, sockets, power switch and sockets and other accessories (Modular Accessories) in the GI box , covert plate etc complete as required including carriage of materials within all leads and lifts . . LAN
RJ-45 Modular type modem jack for computer (One Module) and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification .
4
-
-
MCB/RCBO
Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge GROUP-B: (HAVELLS, HPL, ABB, Indo Asian & other Brands Approved by PWD) (i) MCB
Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles (for LDB, PDB & UPS DB, 10A SP MCB -102NOS, 20A SP MCB -72NOS, & 25A SP MCB - 2NOS)
25
-
-
MCB
Miniature circuit breaker double pole 63 amp. (Breaking capacity 10kA, Curve-C) suitable for 240 volts 50cycles (AS I/C Main UPS DB)
1
-
-
MCB
Miniature circuit breaker four pole 63 amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles (As I/C of PDB)
5
-
-
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARDS FOR MCB/RCBO/RCCB`s
Supply and erection of sheet metal double door distribution boards of suitable size and of required number of ways for mounting MCB/RCBO/RCCB in the existing MCB DB as per PWD General SpecifIcation including carriage of materials within all leads and lifts . GROUP - B (HAVELLS, HPL, ABB, Indo Isian & other Brands Approved by PWD) (I) Sheet metal double door S.P. & N distribution board (dust protected) provided with bus-bar, neutral link and din bar, suitable for incorporating MCB/RCBO/RCCB`s 16 way each (for UPS DB) including carriage of materials within all leads and lifts . .
1
-
-
Sheet metal double door T.P. & N distribution board (dust protected) provided with bus-bar neutral link and din bar, suitable for incorporating FP MCCB`s for incoming and Single Pole MCB`s for outgoing 4 way each (AS LDB/PDB FOR GF ) including carriage of materials within all leads and lifts . .
1
-
-
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate etc as required. including carriage of materials within all leads and lifts . .UPS
5
-
-
Supply, installation, testing and commissioning of 5 KVA, 220V, 1 phase incomming and single phase output with builtin digital display, true On Line double conversion and fully Microprocessor Controlled UPS system including carriage of materials within all leads and lifts .
1
-
-
LIGHT FIXTURES AND FANS: S/E of Philips/Cromton Model 6" dia 15 Watt indoor down lighter recess mounted luminaire complete with all accessories including or equivalent Wipro make as approved by the Engineer in charge complete including driver etc and erection of the Engineer incharge including carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification . .
30
-
-
S/E of Philips Model TBS 869 2 X TL5 -28W indoor decorative, recess mounted luminaire complete with all accessories or equivalent Wipro make as approved by the Engineer in charge including TL-S lamp 2x28 watt and erection of the same direct on wall/ceiling as per satifaction of Engineer -in- charge including carriage of materials within all leads and lifts .
6
-
-
S/E of Wall Fan of size 450 mm sweep Light Grey Model WMHiflo LG 18" Make CG including carriage of materials within all leads and lifts .
8
-
-
Pop-Up Box soft opening, push & slide locking 8 (2 x 4) modules (Legrand) including carriage of materials within all leads and lifts .
6
-
-
Pop-Up box Installation kit for 8 (2 x 4) modules (Legrand)
6
-
-
Supply Erection testing commisioning Copper earthing including carriage of materials within all leads and lifts . .
1
-
-
TOTAL Part B ELECTRICAL : Providing CONFERENCE ROOM CHAIR - MEDIUM BACK REVOLVING MODEL: SMART MEDIUM BACK MECHANISM: Synchro 01 BACK: Fabric upholstery with High resilience PU foam SEAT: Fabric cushioned seat ARMREST: 1D i.e. height adjustable. BASE: Nylon base CASTORS: Nylon castors including carriage of materials within all leads and lifts .
35
-
-
Providing MODULAR CONFERENCE TABLE - 35 SEATER Providing and fixing 35 seater Conference table as per layout. MODEL: GROUP THINK TABLE TOP - 38MM THICK PRELAM MODESTY : 18mm thick Prelam. UNDERSTRUCTURE -Edge Banded including carriage of materials within all leads and lifts .
1
-
-
Providing and fixing a rack for UPS/ Audio System Made of 18mm Partical Board including carriage of materials within all leads and lifts .
2
-
-
Total Part C Furniture : Audio Video system : Providing Ahuja CWS-8100C Type Chairman Unit Carrier Frequency 2.4GHz (2400-2483MHz) Adaptive Digital FHSS Technology Operating Range upto 40m (Indoors) Frequency Response 70 - 15,000Hz Power Supply 2 × AA Alkaline Batteries Dimensions W205 × H65 × D145 mm Weight 830g chairemen unit(cws8100-c,Ahuja ) including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge. .
1
-
-
Providing Ahuja Model Ahuja CWS-8200D Type Delegate Unit Carrier Frequency 2.4GHz (2400-2483MHz) Adaptive Digital FHSS Technology Operating Range upto 40m (Indoors) Frequency Response 70 - 15,000Hz Power Supply 2 × AA Alkaline Batteries Dimensions W170 × H60 × D120 mm Weight 560g deligates unit(8200-D,Ahuja ) including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge
24
-
-
Providing Ahuja Model Ahuja CWS-8300R Type Conference Systems Carrier Frequency 2.4GHz (2400-2483MHz) Adaptive Digital FHSS Technology Operating Range upto 40m (Indoors) Frequency Response 70 - 15,000Hz Power Supply DC: 12V / 1A AC adapter Dimensions W210 × H55 × D185 mm Weight 1.30kg Ahuja Wireless Conference system Host Unit Model CWS-8300R including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge
1
-
-
Providing Ahuja GN-45 Type Gooseneck Microphone Oprating Range Upto 40m (Indoors) Frequency Response 70-15,000Hz Length 450m Compatible with Wireless Conference system Chairman Unit 8100C and Delegate Unit CWS-8200D Weight 130g Ahuja Gooseneck Microphone Model GN - 45 including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site.
25
-
-
Providing Special high gain wall mounting antenna CSA-20 is supplied and sold separately. Mount it on a suitable microphone stand or hang it on a wall. The antenna should be at a suitable height, and facing the Chairman Unit/Delegate Units will help. This antenna is to be fixed to socket on the rear panel of the host unit in place of the standard antenna supplied. Ahuja Conference Systems Antenna CSA-20 including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site.
1
-
-
Providing CM20T two-way built-in loudspeaker can be used as a 16 ohms or 100 volt loudspeaker. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. For 100 volt use, the CM20T is equipped with a high-quality 20 watts 100 volt transformer with several power tappings (20 – 10 – 5 – 2.5 watts). ceilling mount speaker ,apratTherefore it can be used in projects with high ceilings or places with background noise where a little more power is needed including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site.
6
-
-
Providing ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W.,Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Classamplifiers.,IS4250P - 4 inbuilt line level inputsIS4250P + DM4x4 - 4 inbuilt line level inputs plus expansion slot of 4 Dante Inputs and 4 Dante OutputsIS4250P + ANALOGUE4 - 4 inbuilt line level inputs plus expansion slot of 4 line level inputs D amplifier ,make-Bosch/sonodyne,12 0w including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. .
1
-
-
Providing 3LCD BrightEra technology,Bright, clear images with maximum 3,200 lumens colour light outputXGA resolution,Dual HDMI inputs,Easy maintenance,Advanced energy-saving features,Energy efficient with long-lasting lamp life up to 10,000 hours SONY EX430 including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. .
1
-
-
Providing MOTORISED 120" MATT WHITE PROJECTION SCREEN FOR ULTIMATE PROJECTION FOR HOME AND OFFICE Features : Durable square-shaped steel housing with powder coated. Universal mounting bracket with endcap making installation easy whether it is mounted on a wall, suspended or recessed above the ceiling. Hand switch,IR or RF Remote control at option. Memory RC at option, memory your every choice of stop position. Size up to 200″ without joint on case and surface. High Quailty and Economical choice. Widely used in hotels, schools, businesscenters, meetingrooms, home theatres etc. Surface choices are Matt White, Glass Beaded and Pearlux White and Grey including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site. .
1
-
-
Air conditioning: Providing and Installation of Hitachi/ IFB/Voltas/LG 2 Ton 3 star Invertor Split AC including the cost of cabling /conduit/connectors/and other acceseries installation and testing and commissioning and carriage of materials within all leads and lifts and directed by the Engineer -in-Charge at site.
4
-
-
Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements