The Himachal Pradesh State Industrial Development Corporation Limited Tender

Excavation in foundation trenches etc. in earth work in all lifts including stacking the excavated soil in all leads and lifts and returning the stacked soil in 15 cm layers when required into plinths, sides of foundations etc consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated soil as directed within all leads and lifts in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils etc. At dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges if lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Earth work in excavation of foundation trenches etc. in earth work in all kinds of soil for structures (bridge work) complete including refilling trenches in 250mm layers, ramming and wtaering etc. and dressing the sides, bottom etc. including dewatering shoring, strutting complete in ordinary soil, in all depths including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and laying geotextile fibre filter behing stone pitching and crated apron having thickness of not less than 2.50 (two and half) and minimum weight 275 grams/squaremeters (two hundred seventy five) in minimum width 4 mtr. i/c lap folding and jointing etc. not less than 4.00 mtrs. in width complete i/c carriage of materials within all leads and lifts confirming to specifications as per terms and consition no. 21,22 & 23 and as per directions of the Engineer-in-Charge.

Wire crates made of G.I. Wire filled with boulders square cut faces against the wire (boulder filling to be measured and paid for seperatly) G.I wire 5mm thick corresponding SWG-8 15X15 cm mesh. In apron and sloping ptching including carriage of material within all leads and lifts as per directions of Engineer-in-Charge (the wire crates to be made of GI wire (5.00 mm) thick are hard wooven and double knotted/twisted including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge...

Providing and laying of stone filling in apron of guide banks embanlment and toe wall in Wire crates made of G.I. Wire filled with boulders square cut faces against the wire (wire crates to be measured and paid for seperatly). including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and laying of stone ptching on side slopes of guide bank and embankment in Wire crates made of G.I. Wire filled with boulders square cut faces against the wire (wire crates to be measured and paid for seperatly). including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and laying cement concrete 1:4:8 (one cement :Four sand :eight graded crushed stone aggregate 25mm nominal size)(Twenty five milimetre) and curing complete including cost of form work in foundation and plinth, and in breast and retaining walls including carriage of materials upto all leads and lifts.

Providing and laying cement concrete 1:3:6 (one cement :Three sand :Six graded crushed stone aggregate 25mm nominal size)(Twenty five milimetre) and curing complete including cost of form work in foundation and plinth, and in breast and retaining walls including carriage of materials upto all leads and lifts.

Providing and laying cement concrete 1:2:4 (one cement :Two sand : Four graded crushed stone aggregate 20mm nominal size)(Twenty milimetre) and curing complete including cost of form work and reinforcement for rerinforced concrete work in walls (any thickness but not less than 0.10 mtrs. thickness) including attached pilasters buttresses etc.including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to all heights, in:- (a). Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike

(b).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness.

Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded crushed stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete including cost of form work and reinforcement for reinforced concrete work including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge in suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels and in vertical walls of any thickness complete in all respect.

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying granular subgrade course including watering, ramming, consolidation and dressing commplete in all respect including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing of PVC Weep hole 6.5 kg/sqm pressure complete in all respect including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing upto any floor level pre-casted cement concrete shoulders/guide/anchor blocks in 1:2:4 (1cemen:2sand:4graded crushed stone agg. 20mm nominal size) and including the cost of moulds and curing complete with hoisting and setting in position in cement mortar as per direction and upto satisfaction of Engineer-in-Charge including carrigae of material within all leads and lifts.

Providing and laying cement concrete 1:4:8 (one cement :Four sand :Eight graded crushed stone aggregate 25mm nominal size)(Twenty five milimetre) and curing complete including cost of form work in foundation and plinth, and in breast and retaining walls including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying of RCC pipe NP-3 on first class bedding of granular material in a single row i/c fixing collar with CC 1:2 and including joiting and testing complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a) 900mm dia

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.