The Himachal Pradesh State Industrial Development Corporation Limited Tender

Providing, laying,spreading and compacting grade stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer( Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub- base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density i/c lightining, barricading and maintenance of diversions,etc.as per technical specifications Clause 406. By mechanical means.In two layers 75mm thick each. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Cement concrete 1:4:8(1cement:4sand:8graded stone aggregate 40mm nominal size) and curing complete inculding cost of form work in foundation and plinth. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement of any other type as per Clause 150 1.2.2 M30 grade (with minimum 460kg cement per cubic meter) and CC to be laid with RMC plant or flori, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days using curing compound (where specified) and water finishing lines and grade as per drawing and Technical specification clause 1501. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying of interlocking concrete paver block ISI mark pavements M- 40 grade as per drawings and technical specification Clause 1504 including carriage of material within all leads and lifts. Coloured blocks red and grey. 80mm thick

Excavation in foundation trenches etc.in earth work in all kind of soil lift upto 1.50mtr.stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed in all leads all leads and lifts including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 nominal mix 1:3:6 ( 1 cement 3 Sand : 6 crushed graded stone aggregate) in walls including carriage of material within all leads and lifts including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

De-sludging of drain, nallah and culverts i/c stackingof serviceable material and unserviceable materialseperatly and disposal of unserviceable material in all lead and lifts disposed material to be neatly dressed including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:-In gratings framed guard bars,ladders,railing brackets and similar works. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing concrete for plain/reinforced concrete in open foundations complete per drawings and technical specifications Clause 802, 803, 1202 & 1203 nominal mix 1:2:4 (1 cement 2 Sand : 4 crushed graded stone aggregate 20 mm nominal size) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing tor steel reinforcement for RCC work including bending binding and placing in position in all heights. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Clearing jungle i/c uprooting of rank vegitable grassbush, wood,tree and sapling of girth upto 30cm measured at a height of 1 mtr.above ground and removal of rubbish up to a distance of 20 mtrs outside the periphery of the area cleared up to 30cm girth. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing of dual directional delinators made of dia 18 guage rectangular pipe of size 25x63mm and of length 600mm pipe stove enameled and baket to 120 c/power coated head made of ABC plastic rounded moulded with flat face, provided with high intensity prismatic reflectors of colour (white/red) of size 100 x 125 mm with addtional reflective strip 20mm wide make RS mark.

Single legged stop sign boards (900mm octagon) micro prismatic grade retre reflective board made out of 12mm thick aluminium or ACP sheet to be covered with micro prismatic grade retre reflective sheeting as per IRC standards, the back of aluminium sheet to be painted with epoxy paint of standard make, fixed to structural steel frame work of MS angle 25x25x3mm with nuts/bolts/rivets ensuring safety against removal of plates, fixed to one vertical post of 65x65x5mm anglehaving length of 1.80 mtr long complete in all respect.

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material within all leads and lifts.