Jal Shakti Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Jal Shakti Department - HPIPH Tender
Civil And Construction
Eprocure
Opening Date8 Mar 2022
Closing Date21 Mar 2022
Tender Amount₹ 50,48,122
Costs
EMD
₹ 82,981Document Cost
₹ 800Tender Fee
Refer Documents
Summary
Source Level Augmentation Of Rural Water Supply Scheme Belhi, Amb Tilla And Chowki Minar Under Chintpurni Constituency Of Distt. Una Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HPIPH_57105_2Bid Award Id
ViewTender No
EE-JSD-Amb-Amb Tilla Behli 50 LakhTender Authority
Jal Shakti Department ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ist class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 ( 1 cement: 6 sand ) in all leads and lifts as per the direction of the Engineer-in-Charge.
16.37
-
-
Ist class brick work using common burnt clay building bricks in superstructure above plinth level upto floor two level in cement mortor 1:6 (1 cement :6 sand) in all lead and lifts as per the direction of the Engineer-in-Charge.
17.63
-
-
Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:4 ( 1 cement: 4 sand ) in all leads and lifts as per the direction of the Engineer-in-Charge.
3.02
-
-
Providing and fixing pressed steels door frame manufactured from commercial MS sheets of 1.25 mm thickness including hinges jump lock jamb, bead and if required angle thrshold of MS angleof section of 50x25 mm or base ties of 1,25 mm pressesed MS welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards, lock strike plate and shock absovver as specified and applying a coat of approved steel "A" primer after pretreatment of the surface as desired bu Engineer-in-charge Profile "A"
59.35
-
-
Providing and fixing pannelled glazed panalled and glazed shutters for doors ,windows and clerestory windows including black enemelled iron butt hinges with necessary screws 40 mm thick. 2 nd class deodar wood complete in all respect and as per the direction of the Engineer - in- Charge.
12.14
-
-
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ-reinforced concrete and plain Concrete work in :-
-
-
-
Foundation, footings and bases of columns etc. and mass concrete within all leads and lifts complete in all respect.
10.6
-
-
Flat surfaces such as soffits of suspended floors, roofs, landing and the like Floors etc. upto 200 mm thickness in all leads and lifts and as per the direction of the Engineer-in-Charge.
73.19
-
-
Beams,cantilever,girders and lintels.Sides and soffits of beams,beam haunchings, cantilevrs, bressumers and lintles not exceeding 1.00 mtr.in depth in all heights from floor.
7.94
-
-
Providing and laying cement concrete 1:1.5:3 ( 1cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size ) as per IS-456-2000 (with up to date ammendments) and curing complete excluding the cost of form work and reingorcement for reinforced concrete work in :-
-
-
-
Foundation, footing and bases of columns etc. and mass concrete within all leads and lifts complete in all respect.
1.79
-
-
Suspended floors, roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers upto floor two to level complete in all respect i/c carriage of materials with in all leads and lifts.
8.78
-
-
Providing mild/tor steel reinforcement of RCC work i/c bending ,binding and placing in position in complete up to floor two level in all leads and lifts and as per the direction of the Engineer-in-Charge.
10719.95
-
-
Half brick work using common burnt clay building bricks in super structure above 1st. floor level in cement mortar 1 : 4 ( 1 cement :4 sand) of 2nd. Class bricks complete in all lead and lifts as per the direction of the Engineer-in-Charge.
112.99
-
-
Pointing on brick work with cement mortor 1:3 ( 1 cement: : 3 sand ) in all leads and lifts as as per the direction of the Engineer - in- Charge.Cut or weather struck.
89.77
-
-
Providing and laying brick tiles over mumty /terrace roofs grouted with cement mortar 1:3 ( 1 cement : 3 sand) over a 12mm(twelve millimeter) layer of cement mortar 1:3( 1 cement : 3 sand ) and finished neat including carriage of material with in all leads and lifts and other incidentals.
12.48
-
-
6 mm thick cement plaster to ceiling with cement mortar 1:3( 1 cement : 3 sand ) including carriage of material with in all leads and lifts and other incidentals.
73.19
-
-
15 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level including arrises, internal rounded angle, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:3 ( 1 cement :3 sand ) in all leads and lifts as per the direction of the Enginner-in-Charge.
192.03
-
-
20 mm cement plaster in single coat on rough side of brick /stone/ concrete walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:6 ( 1 cement :6 sand ) in all leads and lifts as per the direction of the Enginner-in-Charge.
14.26
-
-
Providing and fixing MS grills of required pattern in wooden frame / pressed steel frame with MS flats square / rounds bars 12 mm dia with round headed bolts and nuts of by screws in all leads and lifts and as per the direction of the Engineer - in- Charge Plain grills.
70.86
-
-
Providing and fixing wire gauge shutters using galvanized MS wire gauge of I.S.gauge designation 85G(eighty five ) with wire of dia 0.56 mm(zero point five six millimetre) for doors windows and clerestory windows including bright finished black enameled iron butt hinges with necessary screws 40mm(forty millimetre )thickof second class deodar wood with in all leads and lifts and as per the direction of the Engineer - in- Charge.
14.64
-
-
Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) in all lead and lifts as per the direction of the Engineer - in- Charge.
13.61
-
-
Constructing brick masonary 'U' shape open surface drain with side wall. 15 x 22 cm in cement mortar 1:6 ( 1 cement : 6 sand) and inside plastering with cement plaster 1:3 ( 1 cement : 3 sand) including earth work and laying 10 cm cement concretein 1:5:10 ( 1 cement : 5 sand :10 graded stone aggregate of 40 mm nominal size) and 7.5 cm.cement concrete 1: 2:4 ( 1cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) and finished with a floating coat of neat cement complete as per standard design.
30.25
-
-
Providing 40x3mm flat iron hold fast 40 cms long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cms 1:3:6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) complete in all respect as per the direction of the Engineer -in- Charge.
30
-
-
P/F MS fan clamps type 1 of 16 mm dia bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of roof as per standard design complete in respect .
2
-
-
White washing with lime on undecorated wall surface ( two coats) to give an even shade including throughly brooming the surface to remove all dirt ,dust mortor drops and loose scale of lime wash and other foreign matter complete in in all respect as per the direction of the Engineer-in-Charge.
181.19
-
-
Distempering with dry distemper of approved brand and manufacture ( Two coats) and of required shade on undecorated wall surfaces to give an even shade over & including a primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even & sand papering / smooth including carriage of material in all leads and lifts.
84.03
-
-
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt & remains of loose powdered materials complete in all respect
122.26
-
-
Providing and fixing sliding door bolts anodized transparent or dyed to required shade and colour with screws etc. complete in all respect 250x16 mm
2
-
-
Providing and fixing tower bolts barrel type anodized transport or dyed to required shade and colour with screws com lete in all respect. 250x10mm.
30
-
-
Providing and fixing aluminium handle anodized transparent or dyed to required shade and colour with screws etc. complete in all respect 100mm dia
20
-
-
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter with enamel with enamel paint other than white complete in all respect as per the direction of the Engineer-in-Charge.
34.86
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with floting coat of neat cement in all leads and lifts and as per the direction of the Engineer-in-Charge 40 mm thick.
60.27
-
-
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil, greas,dirt,and other foreign metter with ready mixed paint brushing wood primer pink complete in all respect as per the direction of the Engineer-in-Charge.
60.27
-
-
Painting two coats excluding priming coat on new wood and wood surfaces with ready mixpaint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter sand papering and stoping complete in all respect as per the direction of the Engineer - in - Charge.
60.27
-
-
RCC Collection Tank , OHSR & boundary Wall
-
-
-
Providing & laying cement concrete M-10 mix concrete using graded stone aggregate 40 mm nominal size, excluding the cost of centring & shuttering in Foundation & plinth.
3.2
-
-
Providing & laying cement concrete M-25 mix concrete using aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-
-
-
-
(i) Foundation,footing,bases of columns and the like & mass concrete.
2.93
-
-
(ii) Wall (any thickness but not less than 0.10 mts.Thickness)attached pillasters,buttresses plinth,& string courses etc.from top of found.level upto floor two level
6.36
-
-
Prov.form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish i/c centring shuttering,strutting & propping etc. with wooden battens & ballies,ht. of propping & centring below supporting floor to ceiling not exceeding 4.00 mts. & removal of the same for in situ-reinforced concrete & plain concrete work :-
-
-
-
Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like.
67.85
-
-
Prov.form work of ordinary timber plankings so as to give a rough finish i/c centring, shuttering,strutting & propping etc. ht.of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :-
-
-
-
Arches up to 6.00 mts.span
7.34
-
-
Prov.in RCC work smooth finishing of the exposed surface with cement mortor1:3(1cement :3 sand )
66.98
-
-
Providing & laying cement concrete M-25 mix concrete using aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for RCC work in :-
-
-
-
(i) Suspended floor,roofs,landing & shelves & their support balconies,beams,girders,bressumers & cantilever upto floor level.
0.9
-
-
(ii) Arches upto floor two level.
0.73
-
-
Steel work welded in built up sections,trusses & framed work i/c cutting,hoisting & fixing in position & applying a priming coatof red lead paint :- In grating, framed ,guards,bars, ladders,railing,brackets & similar works.
405.3
-
-
laying in trenches GMS/MS Tubes (L/M class) tube fitting (Earth work in trenches to be measured & paid for separately)
-
-
-
i) 65 mm scour pipe
6
-
-
ii) 65 mm out-let,inlet & over flow
15
-
-
Providing & fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia. 300 mm) complete with bolts nuts,rubber insertion etc.,(the tail piece if required shall be measured & paid for separatly)
-
-
-
i) 65mm
1
-
-
ii) 65 mm
3
-
-
Prov. & fixing SFRC Man hole cover with frame having frames size of 560 mm internal dia.should not be less than 100 kg
2
-
-
OHSR 60000 Ltrs cap
-
-
-
Providing and laying cement concrete using M - 30 concrete mix with graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :
-
-
-
Foundation,footing.bases of columns & the like & the mass concrete.
5.99
-
-
Wall (any thickness,but not less than 0.10 mtr.thickness) attached pilasters,buttresses,plinth & string courses etc. from top of foundation level upto floor two level
-
-
-
(i) floor four level to floor five level
8.25
-
-
Column,pillars,posts & struts upto floor two level
-
-
-
(ii) floor two level to floor three level
3.06
-
-
(iii) floor three level to floor four level
2.26
-
-
(iv) floor four level to floor five level
2.71
-
-
Lintels,beams girders bressumers & cantilevers upto floor two level
-
-
-
(ii) floor two level to floor three level
4.45
-
-
(iii) floor three level to floor four level
1.21
-
-
Arches upto floor two level:
-
-
-
(ii) floor two level to floor three level
6.58
-
-
(iii) floor three level to floor four level
3.7
-
-
Suspended floors,roofs,landings.etc. upto floor two level
2.61
-
-
(i) floor two level to floor three level
-
-
-
(ii) floor three level to floor four level
-
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two level.
-
-
-
(i) Foundation,footing,bases of columns etc.and mass concrete.
110.49
-
-
(ii) Flat surface such as soffits of suspended floors,roofs,landing and the like
24.67
-
-
(iii) Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pillasres buttresses, plinth & string courses and the like.
-
-
-
(a) Upto 4.00 mtrs.
-
-
-
For Vertical surfaces of tank
99.98
-
-
(iv) Columns,pillars.posts & struts.
30.16
-
-
(b) Beyond 4.00 mtrs.
42.22
-
-
(v) Beams, cantilever, girders & lintels.
-
-
-
Sides & soffits of beams,beam haunchings, catilevers, bressumers & lintels not exceeding 1.00 mtr.depth in all ht.from floor.
53.96
-
-
(vi) Providing form work of ordinary timber plankings, so as to give a rough finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4.00 mtrs.height and removal of the same for insitu reinforced concrete and plain concrete work in Arches upto 6 mtrs span.
35.1
-
-
Beyond 4.00 mtr.height.
32.2
-
-
Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement :3 Sand) complete in all respect within all leads & lifts.
323.49
-
-
Finishing wall with water proofing cement paint of approved brand & maunfacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remove all dirt & remains of loose powedered material etc.
323.49
-
-
Providing & fixing 500 mm dia.SFRC man hole cover with frame and the weight of frame & cover should not be less than 100 kg complete in all respect within all leads & lifts.
2
-
-
Laying GMS/MS Pipes conforming to relevants BIS codes of below mentioned diameters fully jointed with MS Flanges of Table - 5 as per IS :6392 - 1971 excluding the cost of excavation in trenches complete in all respect within all leads & lifts.
-
-
-
80 mm dia inlet,outlet & over flow
39
-
-
80 mm dia scour pipe
11
-
-
Laying GMS Pipes conforming to IS 1239 - 1979 (Part-1) screwed & socketed joints (Light grade) excluding the cost of excavation in trenches
-
-
-
80 mm dia
59.99
-
-
Providing & fixing CI sluice valve (with hand wheel) as per IS:780 - 1984 Class-I upto 300 mm dia i/c brass spindle & as per 2906 - 1984 Class II for diameters more than 300 mm complete with bolts,nuts,rubber insertion etc,(The tail pieces if required shade etc.
-
-
-
80 mm dia inlet, outlet & over flow
3
-
-
Providing & fixing bends of required degrees made from parent tubes conforming to relevant codes fully flanged with MS Flange of Table - 5 conforming to IS: 6392 - 1971 complete in all respect within all leads & lifts.
-
-
-
80 mm dia inlet, outlet & outlet & over flow
3
-
-
40 mm dia scour pipe
1
-
-
Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 Cement: 3 Sand: 6graded stone aggregate 20 mm nominal size) complete in all respect within all leads & lifts.and as per the direction of the .Engineer-in-Chaarge.
18.65
-
-
Providing under layers for plinth protection 75 mm thick (unconslidated) bed dry brick/stone aggregate 40 mm nominal size well rammed & grouted with fine sand i/c preparation of ground complete in all respect within all leads & lifts.and as per the direction of the .Engineer-in-Chaarge.
18.65
-
-
Constructing chamber for sluice valve, with CI surface box 100 mm top dia.,160 mm bottom dia.&180 mm deep (inside) with chained lid RCC top 1: 2: 4 mix (1 cement :2 Sand :4 graded stone aggregate 20 mm nominal size ) 100 mm thick foundation conc.1:5:10 mix (1cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortor 1:3 (1 Cement : 3 Sand ) finished with a floating coat of neat cment i/c curing complete. 600 x 600 x 750 mm inside size With 150mm th.walls of RCC 1:2:4 (1cement : 2 sand :4 graded stone aggregate 20 mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways.
6
-
-
Providing and laying cement concrete 1: 5: 10 ( 1 cement : 5 sand :10 graded stone aggregate 40 mm nominal size) with 15 % plum and curing complete excluding the cost of form work in retaining Wall,B/Wall the size of plum shall usually be 150 mm to 300 mm as per HPPWD specification with in all leads and lifts and as per the direction of the .Engineer-in-Chaarge.
16.2
-
-
Rising Main
-
-
-
Laying, jointing and testing in trenches ( to level or grade) GI pipe of following dia (H/M class) conforming to IS:1239-1990(Part-I)(Latest upto date ammendments of grade and wall thickness as specified below, suitable to with stand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS:6392-1971(latest upto date amendment) and welding of flanges as per 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00mm in thickness asper IS:2712-1998 & butt welded joints. The welding of flanges to be done on both faces in two layers on outer face & one layer on inner face to make the joints leak proof and to the entire satisfaction of the Engineer-in-Charge. the laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operation such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carrage of material upto all lead and lifts.(Earth work in trenches,welding of flanges/butt welding will be measured and paid for seperately)
-
-
-
80 mm dia GI pipe (M.C) as per IS:1239-1990(Part-I)
150
-
-
80 mm dia GI pipe (H.C) as per IS:1239-1990(Part-I)
1000
-
-
80 mm dia GI pipe (M.C) as per IS:1239-1990(Part-I)
3450
-
-
Providing and welding M.S. flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with upto date amendments) with plain end GMS/MSERW pipe in requsite number of layers on both faces to make the joint leak proof (The cost of providing and laying of MSERW pipes to be measured and paid for seprately). The welding of flanges should conform to IS:816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00mm conforming to IS 2712-1998. The work shall be done to the entire satifaction of engineer in charge with in all leads and lifts. MS flange 1% of total joint and butt welding 99% of total joint.
-
-
-
80 mm dia GI pipe (M.C) as per IS:1239-1900 (Part-I) Table-5
3
-
-
80 mm dia GI pipe (H.C) as per IS:1239-100 (Part-I) Table-28
2
-
-
80 mm dia GI pipe (M.C) as per IS:1239-1900 (Part-I) Table-17
3
-
-
Providing circumferencial butt welded joints by electrical arc welding to following diameter GMD/GMSERW pipe conforming IS/ISO 3183-2007 of Grade L320 or X46 having following wall thicknees, welded in requisite number og weld runs so as achieve the minimum effective throat thicknees of weld conforming to IS 816-1969 specification,by using welding eletrodes of 2.5mm to 6.30mm of Advani Oerlikon (Adore)-CITOJET/ESAB make,conforming to IS 814-1991, at site of complete in all pipes,welding of pipes to be done in three layers to make the joints leak proof and to achieve the minimum effective throat thickness of weld conforming to IS- 816-1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani oerlikon (Adore)-CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects and including manual/mechnical handing of pipes in all leads and lifts to the entire satisfaction of Engineer- in- chae..
-
-
-
80 mm dia
759
-
-
Distribution system
-
-
-
laying,jointing and testing GMS pipes including cost of bends complete as per IS:1239 - 2004, Part - I, Light class, of following diameters in trenches complete in all respect as per direction of Engineer - in Charge.(Earth work in trenches to be measur(Earth work in trenches to be measured and paid for separately )
-
-
-
i) 40 mm dia (Light class)
980
-
-
ii) 65 mm dia (Light class)
1850
-
-
iii) 80 mm dia (Light class)
1180
-
-
Providing and fixing brass full way valve (with hand wheel) complete in all respect and as per the direction of Engineer-in-charge in all leads and lifts of following diameters
-
-
-
i) 40 mm dia
1
-
-
ii) 65 mm dia
1
-
-
iii) 80 mm dia
1
-
-
Internal Electrical wiring for Pump House cum chowkidar qtr at LWSS Amb Tilla
-
-
-
Wiring for light/Fan point/Exhaust fan point/call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface/recessed PVC conduct at required including carriage of all material within all leads and lifts.
-
-
-
Group "C"
10
-
-
Wiring for light/power plug with 2 x 4 Sq.mm PVC insulated copper conductor or single core cable in surface/recessed steel conduit alongwith 1 No. 2.24 mm dia bare copper wire for loop earthing as required including carriage of materials within all leads and lifts.
40
-
-
Wiring for circuit wiring with 2 x 1.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed steel conduit as required including carriage of material within all leads and lifts.
25
-
-
Wiring for sub-main wiring with the following size of copper conductor single core cable in surface/recessed steel conduit as required including carriage of materials upto all leads and lifts.
-
-
-
2x6 Sq.mm
3
-
-
Supplying and fixing metal box of 180 x 100 x 60mm deep (Nominal size) on surface/recess with suitable size phonolic leminated sheet cover fixing 3 pim 15/16 amps socket tumber/piano type switch connections painting etc. including carriage of materials within all leads and lifts.
2
-
-
Supplying and fixing backellite batten/angle holder including connection as required.
4
-
-
Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the rod of standard length (upto 30cm) with 1.5 Sqmm PVC insulated copper conductor single core cabe etc. as required sweep type.
-
-
-
Cat. A
2
-
-
Providing, installation, testing and commissioning of prewired flourscent tube fitting complete with ballast, starter and capactors but excluding flourscent tube rod, suitable to operate on 230 volts single phase A.C.supply directly on surface with copper wiring as required including carriage of materials within all leads and lifts tube fixture 1 x 36 watt
-
-
-
Box type Category "A".
2
-
-
Supplying and fixing 40Amps to 63 Amps rating 240 Volts "L" series miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of material within all leads and lifts.
-
-
-
Category- A, 63 Amps.
1
-
-
Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts on surface/recessed completed with tinned, copper busher neutral link, earth bar, detachable gland plate inter -connections, including painting, earthing etc. as required Bus bar 8 way.
1
-
-
Supplying and fixing 5 Amps to 32 Amps rating 240 volts, G series miniature circuit breaker of following poles in the existing MCB, DB complete with connections testing and commissioning etc. as required
6
-
-
Earthing with G.I. pipe earth, pipe 4.5 mtrs length, 40mm dia including accessories and providing masonry enclousres with cover plate having locking arrangement and watering pipe etc.( but without charcal coke and salt) complete as required including carriage of materials within all leads and lifts.
1
-
-
Extra using salt and charcoal for pipe earth electrode as required, including carriage of materials
1
-
-
Supplying and laying 6 Sqmm G.I.wire at 0.50 mtr below ground level for conductor earth electrode, including soldering etc. as required including carriage of materials within all leads and lifts.
20
-
-
Providing, fixing & testing Street Light Fixture with CFL of 36 watt, copper ballast, G.I. Pipe bracket, complete in all respects.
-
-
-
Category "A", single pole.
2
-
-
Pumping Machineries.
-
-
-
Submersible Pump set for WSS Chowki Minar Booster Stage Tubewell No.1
-
-
-
Supply and errection of submersible pumping set of reputed make such as KSB/Calama/BS/Oswal / worthigton/ LUBI/ GROUNDFOS/HINDUSTAN/SEERAX/SABAR/Johnston/Amrut conforming to latest relevent BIS . The pump should be fitted with free fine impellers of suitable alloys as per BIS ;5659-1978 with upto date amendments,suitable for raw / clear water having greased packed bearing and shell with wound stator on motor side and with shaft protection on pump side ensuring better liffe for shaft conforming to BIS specifications The pump shall be directly coupled to suber-sible squirrel cage electric induction motor of same make conforming to BIS ;9283-1979 with upto date amendments, totally dust and water proof for submersible pump, duly isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed,lubricated bearing and provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear and tear.It should also be fitted with a device to make up expa-of water with heating of motor The pumpset should include water level guard i/c cable ,errection clamps, cable clips and suitable for opertion on data given below. Specifications offered a Pumps :- Specifications i) Make ii) Model iii) No. of stages iv) Manufacter's certificate to be attached Performance i) Discharge ii) Head iii) Efficiency of Pump a) Duty Head b) (+) 10% Duty Head. c) (-) 15% Duty Head d) Performance curve to be attached b) Motors; Specification i) Make ii) Model iii) B.H.P iv) Speed v) Insulation
2
-
-
Discharge, (Q) 3.39 LPS
-
-
-
Total Head ( H ) 47.35 Mts.
-
-
-
SWL in Tubewell 384.65 mtr. bgl.
-
-
-
R.L. point of discharge 426.65 mtr
-
-
-
R.L. of Pump House =423.65 mtr
-
-
-
Seasonal fluctuation + draught condition + bowl assembly.9 mtrs.
-
-
-
Drawdown in Tubewell 10.00 mtrs.
-
-
-
StaticHead = 42.00 mtrs.
-
-
-
Static suction lift + tive
-
-
-
Rising main Column pipe
-
-
-
Length 150.00 mtrs Length 25.50 mtr
-
-
-
Dia 80 mm (H) Dia 80 mm (H)
-
-
-
Class GMS (H)
-
-
-
iv) Pumping hours 8hours
-
-
-
v) Alititude of installations above M.S.L 700mtr
-
-
-
vi) Characteristic of water
-
-
-
a) Temperature 25 Deg Cel.
-
-
-
b)Turbidity __________________JTU
-
-
-
c) Allkanity _________________mg/1Ca Co3
-
-
-
d) Size of solids _______________ mm
-
-
-
e) others
-
-
-
vii) Depth of T/well 125.50 mtr
-
-
-
viii) Dia of T/well assembly 300/200 mm
-
-
-
ix) Length of assembly pipe 125.50 mtr
-
-
-
x) Dia of housing pipe 300mm
-
-
-
xi) Length of housing pipe 70 mtr
-
-
-
OPERATING CONDITIONS
-
-
-
i) Type of current A.C Three phases.
-
-
-
ii) Frequency 50 Cycles/ Sec.
-
-
-
iii) Rated Voltage 415+/-15% Volts
-
-
-
iv) System of earthing Double Loop earthing as per BIS 3843-1987 latest
-
-
-
v) Speed of Revolution __________________ RPM 2900
-
-
-
MOTOR
-
-
-
i) Ref to BIS code BIS 9283-1979 with upto date amendments
-
-
-
ii) Type of enclousre of motr As per BIS :4691-1985 (latest)
-
-
-
iii) Mechnical out put in HP
-
-
-
iv) Class of insulation : Class B The motor should be able to withstand intial current of 2.50 times the rated current for two minutes without suffering damages of permanet deformations
-
-
-
PUMP
-
-
-
i) Ref to BIS code BIS 5659-1978 with upto date amendments
-
-
-
ii) Driver Type Electric drivern
-
-
-
iii) Operating Range -15%to +10% of Total head at duty point
-
-
-
iv) Deliver size of Pump ;---------- (to be quoted by tenderer)
-
-
-
Providing ICTP Main Switch with HRC fuses of Havell/L&Tmake and having capacity 30%extra of the operational rating as per IS : 4064-1978 with upto date amendments.
1
-
-
Providing MS Sheet steel fabricated floor mounted switch board including angle iron post of suitable height and size ISA 40x40x6 mm duly painted with sheet of 16 gauge comprising and capable of mounting the following accessories with all internal connections.
1
-
-
MCB of L&T/Havells make of suitable capacity on incoming feeder with or without intial oil filling as the case may be with neutral linked under voltage releases as per IS ; 2516-1985 with upto date amendments.
1
-
-
ELCB of recommended make L&T/Havells as per IS ;2516-1985 with up to date ammendments, and of suitable range which should have control box , operating handle and trip / reset bush button on / off of indicators, reindicating off spring condition of the circuit breaker for over current protection. The circuit should be equiped with magnet thermal release with metallic tape CTS. It should also be fitted with earth fault for tripping of breaker on occurence of Earth fault.
1
-
-
The voltage monitor Relay 3 phase with all protection and usual indicator and electric siren against single phasing, low voltage, high voltage,reverse phasing,overloading and phase voltage difference as per IS; 3842 ( Latest Edition )
1
-
-
A.C. supply,voltmeter of recommended make L&T/Havell/AE/ of suitable range with selector switches as per IS ;1248-1983 with up to date latest amendments.
1
-
-
AC supply ammeter of L&T /Havell / AE make of suitable range with selector switches and CIS operated as per IS :1248 ( P-I&II ) -1983 with upto date amendments.
1
-
-
Bus bar chamber of L&T / Hevells make having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current one copper bar of half the rating of full length for neutral phase as per IS : 8084-1976 and IS: 11353-1985 read with BIS : 5578- 1985 with upto date ammendments Three phase indicator lamps complete with toggle switches for Bus Bar Chamber individual motors as per IS: 3452 (P-I&II) with upto date ammendments.
1
-
-
Capacitor of BHEL/GEC/ L&T make as per IS ; 2834-1968 with upto date amendments,to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code ( of Seimens / Glocter/IEC make ) from bus bar chamber to capacitor as per IS : 4064-1978 with upto date amendments . Rating of capacitor will be approved by HPSEB
2
-
-
Providing suitable oil immersed star delta starter of Kilburn/L&T/ Havells/IMP make as per IS : 8544-1979 with'upto date amendments for Squirrel cage / Slipring motor mounted on panel board with magnetic 'type overload release and dashpot, time lag, under voltage release with or without 'initial oil filling as the case may be with single phase prventor as per IS ;1248 ( P-5)1983 with up to date amendments.
2
-
-
Providing and fixing of double flange Cast Iron Sliuce valve of Leader / Kirloskar RG/Kirloskar/LP/leader/Kirloskar/Suchdeva/any other approved make for the Column pipe and capable of withstanding the normal seat pressure and as per IS 780-1984(Cast Iron) with latest ammendments
2
-
-
Providing and fixing of double flanged swing type cast iron Reflux valve of Kirloskar/Leader RG/Kirloskar/LP/leader/Kirloskar/Suchdeva/any other approved make having Bye pass arrangement on the rising main and capable of 'withstanding normal Seat Pressure as per IS:5312-1984 (P-I) (Cast Iron) with latest ammendmets PN 1.0 in R/main 125 mm dia.
2
-
-
Providing pressure gauge of Prega/Precision make complete with all accessories such as stop cock, Copper tubing as per IS: 3624-1987 with upto date ammendments..
2
-
-
Supply of PVC 3 core copper cable jointless, flat water proof cable as per BIS 694-1998 latest with upto date amendments, suitable for the pumpsets offered from MCCB to motor including all other electrical equipments/ accessories such as thimble, flexible pipe,solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor . The type, size and make shall be subject to approval of HPSEB authorities.
1
-
-
lowering of GMS Column pipe assembly 125 mm dia(MG) including MS flanges of Table 17 as per IS : 6392-1971 with upto date amendments, rubber/asbestos gasket of min. 3mm thickness as per IS 2712-1979 and required numbers of nuts and bolts as per IS ;1364-1983 . The Column pipe shall be as per relevent IS Code The Column pipe should be extended upto 5 mtr. beyond the outer wall of the pump house in the direction of Rising main . The Column pipe should be properly jointed with the Rising main including all necessary accessories like increaser / reducer, flanges, bends etc, including supporting clamps (2Nos.) at the top of T/well assembly, and as per the direction of Engineer - in - Charge.
1
-
-
Providing and laying copper PVC insulated 3 core armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 ( P-I ) 1988 or latest with upto date amendments of Seimen /Gloster/IEC/ICC/ EICO/National / Grandlay make including all othe accessories such as thimble, flexible pipes, solder nuts and bolts,cable glands etc. laid in pipes of trenches under floor. Armoured Power Cable. Suppy side From meter of HPSEB to Bus Bar and Switch)
1
-
-
Installation of all items appearing as above as per the systematic drawing attached with the documents or as per the direction of Engineer - in- charge.
1
-
-
Providing and laying copper PVC insulated 3 core armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 ( P-I ) 1988 or latest with upto date amendments of Seimen /Gloster/IEC/ICC/ EICO/National / Grandlay make including all othe accessories such as thimble, flexible pipes, solder nuts and bolts,cable glands etc. laid in pipes of trenches under floor. Armoured Power Cable. Suppy side From meter of HPSEB to Bus Bar and Switch)
1
-
-
Providing and fixing double earthing with G.I. wire / plate of 600x600x6.3mm thick electrode complete with material such as thimble, nuts and bolts,charcoal,salt, 25x5mm copper strip as per IS 3043-1987 with upto date amendments for motors and other eletrical equipments and digging of pits etc. complete in all restect as per the dirction of the Engineer-in-Charge.
1
-
-
Centrifugal Pumping Machinery for WSS Chowkiminar
-
-
-
Providing horizontal spindle ,horizontal / radial split casing / end suction (back pull out arrangement). Single / double / multi stage centrifugal pump or combination of pumps in series / parallel of recommended make such as Mather and Platt /KSB/Beacon weir/Kirloskar / BE/ Jyoti/LUBI/GROUNDFOS/HINDUSTAN as per BIS IS 1520 1980 with upto date ammendments read with IS- 9137. 1978 or latest edition suitable for lifting water for under mentioned characteristic with Bronze impellers / priming funnels, casing ring and shaft sleeves of Bronze shaft of stainless steel with cast iron casing, coupled directly through a flexible coupling on a common cast iron/cast steel base plate (base plate to be framed from the manufacturers of the pumping unit only) to slipring/Squirrel cage screen protected drip proof induction motor/,motors of standard make such as Kirloskar /Bhel /Crompton/NGEF /GEC/ Seimens /jyoti/ LUBI/GROUNDFOS/HINDUSTAN and suitable for operation on 415 (+/-5%) volts. 50 Cycles/Sec., 3 phase AC electric supply. The power of electric motor/motors should be at least + 10% in excess of the maximum power required by the pump/pumps in the Operation range of (+10%) and (-15%) of the duty point head. The motor/motors as per IS 325 IS 1978 with upto date amendments read with IS 900 1972 it should include cost of Bearing. Nuts, Bolts and painting etc. and should meet the following requirements.
2
-
-
Coupling
-
-
-
Base Plate
-
-
-
Discharge (Q) 3.39 LPS each pump.
-
-
-
Total Head (H) 219.24 mtrs.
-
-
-
a)LWL In collection tank 150 mtr
-
-
-
b)R.L. of shaft 424.15 mtrs.
-
-
-
c)R.L. of discharge Pt. 582.00 mtrs.
-
-
-
d)Suction lift. + tive
-
-
-
e)Discharge Head
-
-
-
f) Static Head 158.35 mtrs.
-
-
-
Rising main.
-
-
-
Length 4450 mtrs.
-
-
-
Diameter 80 MM
-
-
-
Class GMSERW/ GMS (H)/(M)
-
-
-
Pumping hours. 8 hours.
-
-
-
Altitude of installations above M.S.L 700_mtrs.
-
-
-
Characteristic of Water
-
-
-
a)Temperature ________Deg.Col.
-
-
-
b)Turbidity ________ JTU
-
-
-
c)Alloanity _________ mg/1 ca Co3
-
-
-
d)Size of solids __________ mm
-
-
-
e) Others.
-
-
-
Providing ICTP Main Switch with HRC fuses of Kilburn/L&T / Havells/Siemens/Standard make and having capacity 30% extra of the operational rating as per IS-4064 : 1978 with upto date amendments, immediately after the Energy meter of the HPSEB.
2
-
-
Providing MS Sheet, steel fabricated floor mounted switch board i/c angle iron post of suitable height and size ISA 40x40x6mm duly painted with steel sheet of 16 Gauge comprising and capable of mounting the following acccessories with all internal connections.
2
-
-
OCB of Kilburn/ L&T/MEI /GEC make and of suitable capacity on incoming feeder with or without initial oil filling as the case may be with neutral linked under voltage releases as per IS: 2516-1985 with upto date amendments.
2
-
-
ELRCBCT OP of recommended make L&T/Havells as per IS ;2516-1985 with up to date ammendments, and of suitable range which should have control box , operating handle and trip / reset bush button on / off of indicators,reindicating off spring condition of the circuit breaker for over current protection. The circuit should be equiped with magnet thermal release with metallic tape CTS. It should also be fitted with earth fault for tripping of breaker on occurence of Earth fault.
2
-
-
The voltage monitor Relay 3 phase with all protection and usual indicator and electric siren against single phasing, low voltage, high voltage reverse phasing, overloading and phase voltage difference as per IS: 3842 (Latest Edition).
2
-
-
100 mm diameter A.C. supply, voltmeter of recommended make L&T/ Havells/AE of suitable range with selector switches as per IS: 1248-1983 with latest amendments.
2
-
-
Power factor meter of AE/L&T make as per relevent IS Code with upto date ammendments.
2
-
-
Frequency meter of AE/L&T make as per relevent IS Code with uptodate ammendments. .
2
-
-
Bus bar chamber of L&T / Havells make having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current one copper bar of half the rating of full length for neutral phase as per IS : 8084-1976 and IS: 11353-1985 read with BIS : 5578- 1985 with upto date ammendments.
2
-
-
Three phase indicator lamps complete with toggle switches for individual motors as per IS: 3452 (P-I&II) with upto date ammendments.
2
-
-
100 mm dia circular dia'AC supply Ammeter of AE/IMP/Havells/L&T make of suitable range withselector switches and CTS operated as per IS: 1248 (P-I&II)-1983 with upto date ammendments.
4
-
-
Pdg Hour run meter of recommended make of suitable capacity as per IS:722 (latest edition)
2
-
-
Capacitor of Mechell/BHEL/GEC/ L&T make as per IS ; 2834-1968 with upto date amendments,to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code ( of Seimens / Glocter/IEC make ) from bus bar chamber to capacitor as per IS : 4064-1978 with upto date amendments .
4
-
-
Providing suitable ATS starter of L&T/Hevells/Kilburn make as per IS: 8544-1979 with upto date ammendments for squirrel cage/slip ring motor mounted on panel board with magnetic type overload release and dashpot, time lag, under voltage release with or without initial oil filling as the case mayu be with single phase preventor as per IS 1248 (P-V)-1983 with upto date ammendments.
4
-
-
Providing and fixing of double flanged cast iron sluice valve of kirloskar/Leader / Kartar/LP/Suchdeva/RG or any approved make for suction pipe and capable of withstanding the normal seat pressure as per IS 780-1984 with latest ammendments.
4
-
-
Providing and fiximg of double flanged Cast steel Sluice valve of Leader/Kirloskar RG/Suchdeva any other approved make of 150 mm dia for the delivery pipe of pump and capable of with standing the normal Seat Pressure as per BIS 1414 API 600 (Cast steel) as the case may be with latest ammendments.
4
-
-
Providing and fiximg of double flanged Cast steel double flanged reflux valve of Leader/Kirloskar RG/Suchdeva any other approved make of 100 mm dia class- ASA 300 for the delivery pipe of pump and capable of with standing the normal Seat Pressure as per BIS 1414 API 600 (Cast steel) with nuts and bolts and rubber insertion shee of 21kgf/cm2 complete in all respect..
4
-
-
Providing and fiximg of double flanged swing type Cast steel Reflux valve of Leader/Kirloskar RG/Suchdeva any other approved make 125mm dia having Bye pass arrangement on the rising main of the Pump and capable of with standing normal Seat Pressure as as per BIS: 1414 API-600 with upto date ammendments.
4
-
-
Providing 100 mm dia circular dial pressure gauge of Prega/Precision make complete with all accessories such as stop cock, Copper tubing as per IS: 3624-1987 with upto date ammendments.
2
-
-
Installation of all items appearing at S.No.as above as per the systematic drawing attached with the tender documents or as per the direction of Engineer-in Charge.The contarctor should ensure proper jointing of delivery pipe line of pump with the Rising main including all necessary accessories like increaser /reducer specials etc. as per site conditions and as per direction of the Engineer-in Charge.
1
-
-
Fixing of double flanged GMS piping work(layout to be approved by Engineer-in-Charge) for suction and delivery pipes suitable to pumps offered and common header as per the rising main respectively complete with all specials such as bends,Tees,Reducers Inceasers with companion flanges matching with the relevant specifications of the accessories as indicated in the Drawing i/c rubber/ asbestos gasket of 3 mm thickness as per IS : 2712-1979 and required number of Nuts and Bolts as per 1364-1983.-the pipes shall be as per relevent IS code and to withstand 1.5 times total head.
1
-
-
i) Suction Pipe 80 mm dia.
20
-
-
ii) Delivery Pipe 65 mm dia.
20
-
-
iii) Common Header 80mm dia. and will extend upto 5 metres from the outer wall of the pump house in the direction of Rising main of 100 mm dia to be joined.
20
-
-
Providing and laying 3 core copper PVC Insulated armoured power cable(One cable carrying all the three phases) of suitable size and capacity to motors and all other elelctrical equipments as per IS: 1554(P-I)1988 or latest with upto date amendments of Seimen/Gloster/IEC/ICC/EICO/National/Grandlay make including all other accessories such as thimble, flelxible pipes, solder, nuts & bolts, cable glands etc. laid in pipes or trenches under floor.
1
-
-
Providing and fixing double loop earthing with Copper wire/plate 600 mm x 600mm x3.15mm thick electrode complete with material such as thimble, Nuts & Bolts charcoal, salt as per IS:3043-1987 with upto date amenments GI plate & strip of suitable size for motors and other electrical equipments and digging ofpits etc. complete in all respect as per the direction of the Engineer-in-Charge.
1
-
-
Providing pressure gauge of Prega/Precision make complete with all accessories such as stop cock, Copper tubing as per IS: 3624-1987 with upto date ammendments.
2
-
-
Supply of PVC 3 core copper cable jointless, flat water proof cable as per BIS 694-1998 latest with upto date amendments, suitable for the pumpsets offered from MCCB to motor including all other electrical equipments/ accessories such as thimble, flexible pipe,solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor . The type, size and make shall be subject to approval of HPSEB authorities.
1
-
-
lowering of GMS Column pipe assembly 65 mm dia(MG) including MS flanges of Table 17 as per IS : 6392-1971 with upto date amendments, rubber/asbestos gasket of min. 3mm thickness as per IS 2712-1979 and required numbers of nuts and bolts as per IS ;1364-1983 . The Column pipe shall be as per relevent IS Code The Column pipe should be extended upto 5 mtr. beyond the outer wall of the pump house in the direction of Rising main . The Column pipe should be properly jointed with the Rising main including all necessary accessories like increaser / reducer, flanges, bends etc, including supporting clamps (2Nos.) at the top of T/well assembly, and as per the direction of Engineer - in - Charge.
1
-
-
Providing and laying copper PVC insulated 3 core armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 (P-I ) 1988 or latest with upto date amendments of Seimen /Gloster/IEC/ICC/ EICO/National / Grandlay make including all othe accessories such as thimble, flexible pipes, solder nuts and bolts,cable glands etc. laid in pipes of trenches under floor. Armoured Power Cable. Suppy side From meter of HPSEB to Bus Bar and Switch)
1
-
-
Installation of all items appearing at S.No as above as per the systematic drawing attached with the documents or as per the direction of Engineer - in- charge.
1
-
-
Providing and laying copper PVC insulated 3 core armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 ( P-I ) 1988 or latest with upto date amendments of Seimen /Gloster/IEC/ICC/ EICO/National / Grandlay make including all othe accessories such as thimble, flexible pipes, solder nuts and bolts,cable glands etc. laid in pipes of trenches under floor. Armoured Power Cable. Suppy side From meter of HPSEB to Bus Bar and Switch)
1
-
-
Providing and fixing double loop earthing with G.I. wire / plate of 600x600x6.3mm thick electrode complete with material such as thimble, nuts and bolts,charcoal,salt, 25x5mm copper strip as per IS 3043-1987 with upto date amendments for motors and other eletrical equipments and digging of pits etc. complete in all restect as per the dirction of the Engineer-in-Charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements