Institute Of Himalayan Bioresource Technology Tender

Suppying & laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, coupler etc. conforming to IS 14930, Part II complete with fitting and cutting cutting, jointing etc. in the existing trench, complete as required. i) 160 mm Dia ( OD - 160 MM mm & ID 135 mm nominal)

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI/ Finolex) i) 3.5 core 240 sqmm

SITC of LT Panel (Manufactured by CPRI approved manufacturer), indoor type cubicle Panel, vermin proof, totally enclosed made out of 2.00 mm thick CRCA sheet steel machine pressed of suitable size, suitable to operate on 3 Phase 4 wire system with Phase Sequencing Facility, 415 volts, 50 Hz, Double door front and back openable with locking arrangement inc. frame of panel with angle iron of size 50 x 50 x 5 mm. Bottom gland plate in cable alley for incoming & outgoing cable of suitable size as per switchgear rating ( Main cable being 3.5 core 240 sqmm), having apron (1.6 mm )on 3 sides of panel from base to ground level incl cable alley on both sides complete duly powder coated with RAL 7032(PP Grade) 7 tank process comprising with following complete as specified: i) Bus Bar Strip, four Pole capacity 500 Amp. Aluminium strip of suitable size based on 1.0 Amp. per sqmm, coloured coated heat shrinkable sleeves , Panel will consist of : Incoming : a) MCCB 400 amp, 415 volts, 36 ka, 4 pole with adj. thermal magneic release (Inc. Spreader Terminal) = 01 No. b) Contactor MNX 400 (or Equivalent), 400 amp. = 02 No. c) On Delay Timer = 01 No. d) SM 175 Relay (or Equivalent) = 01 No. e) Bypass Changeover Switch 400 Amp = 01 No. f) multifunction metre with LCD display - 01 no. g) Indicator with neon lamps for RYB, 3 Phase = 01 Set Outgoing : a) MCCB 100 Amp., 415 V, 25 ka, 3 pole with adj thermal magnetic release (Inc. Spreader Terminal)= 04 No. b) MCCB 63 Amp, 415 V, 16 Ka, 3 pole with adj. thermal magnetic release = 07 no. c) Terminal Strips 63 Amp. = 07 Sets (MCCB & Contactor Make: Siemens/ ABB/ Legrand/ L&T ).

Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Inernal work - Exposed on wall i) 22.22 mm outer dia Pipe

Providing and fixing S.S. Gate valve of approved quality conforming to IS:8931 i) 15mm nominal bore

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° i) For 22.22 mm outer dia pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall i) 20 mm dia nominal bore