Institute Of Himalayan Bioresource Technology Tender

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ HDPE pipe as required i) Above 95 sq. mm and upto 185 sq. mm

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. i) Above 6.5 metre and upto 8.0 metre

Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted).

Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required i) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. i) 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI ) i) 3.5 core 120 sqmm

Supplying of GI wire 8 SWG.

Supplying of Steel Tubular Pole(Swaged Type), 8.0 Mtr long with MS Plate welded at bottom , painting one coat of red oxide and two coat of aluminium paint as required. Pole confirming to IS 2713-1980, Pole designation 410 SP-10. Item includes supply & fixing of suitable size MS Angle on top of pole required for fixing of armoured aluminium 3.5 core 120 sqmm cable binded with 8 SWG GI wire. (Note: Cable & G.I. wire not included in the Item.)

Supplying & fixing MS Tubular Pole 65 mm Dia as per IS2713, 1980 inc. wiring the pole with 2x1.5 sqmm FRLS Copper wire. Pole is of 3.5 Mtr. Length with 3.6 mm thickness, welded at bottom, having 25 mm Dia hole at centre. Painting one coat of red oxide and two coat of black paint etc. as required.

Supplying & fixing Integral Pole Mounted 35 Watt LED Post Top Lanteren with decorative clear opal acrylic diffuser and IP65 protection. (Make: Bajaj/ Wipro/ Philips).

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required (Make: Polycab/ Havells/ KEI ) i) 2.0 core 6 sqmm

Supply, fabricating, installing, testing, commissioning & electricaly connected factory(CPRI approved) made, LT panel board of approved size as recommended by IS & CPRI Norms (1.125x1.125x0.45--- LXHXD Mtr Approx), Outdoor Type, made out of 3.15 mm CRCA Sheet. Powder coatedc with pure polyester grade powder. Panel should be fully compartmentalised floor mounted with frame & legs of 5 mm MS 600 mm long 1100 volts, with IP 65 protection for 415 volts, 3 phase, 4 wire AC Supply, completer all as specified including provision of following accessories/ components housed in it : i) 200 Amp rated Al. bus bar with colour code TPN mounted on epoxy insulators : 01 set ( set of 04 bus bars) (1 sqmm = 1 amp) ii) Digital Multifunction metre 0-200 amps with suitable CT= 01 SET III) LED INDICATING LAMP (SET OF THREE) = 01 SET iv) Internal wiring with 110 volt grade unsheathed PVC insulated copper conductor of suitable size with colour coding. v) Earthing terminal, cable gland, Danger notice plate for LT DULY RIVETED/ PASTED TO THE PANELBOARD DOOR. INCOMING : I) MCCB 160 Amps, 4 pol;e, adj-T fIxed-M based, rupture capacity 25 KA (Spreader Links inc) =01 nO ii) Auto Transfer Switch 160 Amps 4 Pole = 01 NO Outgoing : i) MCCB 63 Amps, TP+N1 16 KA Adj - T fixed - M ( Spreader Links inc) = 03 No ii) MCCB 25 Amps, TP+N1 10 KA Fixed (Spreader Link inc) = 01No iii) MCB 25 Amps 10 ka, C curve with Terminal Block = 01 no. iv) Time Switch : 1*16 Amp, 4P MCB + 16A AC Duty Contactor + Astro Time switch. Output to be provided on terminal block (3*2P) = 01 Set ( MCCB Make: INDO ASIAN/ HAVELLS/ L&T, Astronomical Time Switch Make: L&T/ LEGRAND/ SCHNEIDER, Auto Transfer Switch Make : L&T/ Havells/ Hager).