Housing And Urban Development Authority Tender

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering.

Armoured cable 35 sq. mm ( 3.5 core)

Armoured cable 70 sq. mm ( 3.5 core)

Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required. Make. TATA, JINDAL

25 mm Dia

32 mm Dia

65 mm Dia

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required. Make MINIMAX,CEASEFIRE,LIFE GUARD

Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A') Make MINIMAX, CEASEFIRE,LIFE GUARD

Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling (IS 903).Make MINIMAX, CEASEFIRE, LIFE GUARD

Providing & fixing 63 mm dia Gun metal Braneh pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.Make MINIMAX,CEASEFIRE,LIFE GUARD

Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried. Make MINIMAX, CEASEFIRE, LIFE GUARD

Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect. Make MINIMAX, CEASEFIRE, LIFE GUARD

Four way

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. Make SANT,ZOLOTO,LEADER

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect. Make SANT, ZOLOTO,LEADER

80 mm dia

100 mm Dia

150 mm Dia

200 mm Dia

supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried. Make H GURU,

SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect. Make INFOSES , SYSTEM SENSOR

supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Providing fixing,testing and commissioning of 15mmdia chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) Make LIFE GUARD,MINIMAX, CEASEFIRE

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 450mm in diameter and 2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Supplying installation,testing and commissioning of electric driven Main fire pump suitable for aotumatic operation and consisting of following complete in all respect as required with Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 70 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.) with Suitable HP SQ cage induction motor 60 HP,TEFC,synchronous speed 2900 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation ,conforming to IS-325. Make KIRLOSKAR/ ABB/CGL with M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required and (D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads.

Supply Insllation,testing,and commissioning Jockey pump with 15HP SQ cage induction motor,TEFC,synchronous speed 2900 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation,conforming to IS-325 for 180 LPM and 70 Metres head conforming to IS 1520 bronze impeller/SSansMechanical seal.MS fabricated common base plate,coupling,coupling guard,CCfoundation etcas requried. Make. KIRLOSKAR/ABB/CGL

Supplying installation,testing and commissioning of Desiel driven fire pump suitable for aotumatic operation and consisting of following complete in all respect as required with Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% of the rated head) with Suitable 62 HP 1500/1800 RPM deesel engine conforming to IS:649/IS:160/IS10002 all amended upto date, countnuous duty, multi cylinders vertical 4 dtroke cycle water cooled, developing suitable at operating speed specified to drive the fire pump capable of driving continous non-stop opreation for 8 hours having 10% overload capacity for one hour in a period of 12 hours continuous run , capacity to accept full load within 15 seconds from the receipt of signal to start and complete with following accessories. Make. KIRLOSKAR/ABB/CGL , Dynamically balanced fly-wheel, Direct coupling for pump and coupling guards, Radiator with hoses .fan water pump,drivearrangement and guards, Air-cleaner dry type, Fuel tank with necessary pipe, pump for fabricating oil and lubricating oil filter, Electric starding system alongwith battery 12 V/24 V, Exhaust siliencer (residentail type) with necessary pipe work, Governor, Instrument panel housing all the gauges including tachometer,hourmeter and starting switch with key (for manual starting), Necessary safty control and stop solenoid in the event of fault, Painted in post office red colour and Common base plate fabricated out of MS channel of suitable size for assembling the pump and the engine fkexble coupling and with couplingguard for protection/safty.

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required. Incomer I ) 250 A, 4 pole, 50 KA, MCCB withmicriprossor release with Ics=Icu digital Volt meter(0-500 Volts) with selector switch digital Ammeter (0-400 Amps) with in built selector switch and CT's etc. Set of 3 phase LED indicating lamps, set of Al. bus bar for 500 Amps OUTING Mains Fire pump. I ) 160 Amps, 4p MCCB, 35/36 KA Ics=100% Icu with suitable HP fully automatic star/delta starter with over load protection, current sebsing type single phase preventor complete with all accessories and internalwiring requried for automatic operation, selector switgh for/ remoute, auto /mannul oFF operation-1sets ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set iii)Pump on LED Induication Lamp -1 No b) Jockey pump. i) 63 Amps. 4P MCCB 25 KA Ics=100% wit hSuitable HP fully automatic star/delta starter with over load protection .(without no volt and under voltage trip), current sebsing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote,auto/manual OFF operation-2 set ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set iii)Pump on LED Induication Lamp -1 No Diesel Engine Control Control for Diesel Engine Comprising Auto/ Manaul selector switch and 3 attempt starting device, timers and relays as requried . Push buttions.start/ stop in manual mode. Indication Lamp for High/Low Lub. Oil pressure, High Water Temp, and Engine ON indication. Battery Charger suitable for 12/24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20 A DC Ammeter . All standard relay and accessories for automatic operation. d) System Controller Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification

Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK) Make. MINIMAX,CEASEFIRE,LIFE GUARD

4.5 KG

Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK)Make MINIMAX,CEASEFIRE, LIFE GUARD.

Providing fixing,testing and commissioning flexible sprinkler hose 25 mm dia chrome, 1 sett rode, 3 clamp, 1 nipple 25mm dia 1500 mm lenght complete as per specification. Sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (1500 mm as per required at site) and including all lead and lift (ISI MARK)

Prov.& fixing UL/FM listed powder coated firnish Esuitecheon plate complete include fixing in position on pipe and celling complete in all respect. 9Size=15 NB)(ISI MARK)