Housing And Urban Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Civil And Construction
Building Construction
Water Storage And Supply
Eprocure
Opening Date1 Jul 2024
Closing Date10 Jul 2024
Tender Amount₹ 10,31,20,172
Costs
EMD
₹ 20,31,210Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction Of Iti Building At Bhadrota Tehsil Sarkaghat Distt Mandi Hp Including Internal External Water Supply Sanitary Installation Development
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HIMUD_89902_1Bid Award Id
ViewTender No
HIMUDA-MD-E-170-2024Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads lifts.
121.08
299866
2476.6
Providing and laying in position cement concrete of specified grade 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth leve including carriage of material in all leads and lifts.
19.58
143012
7304
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts.
573.57
3496081
6095.3
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads and lifts. 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size).
2265.65
16563714
7310.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts.
121.08
698195
5766.4
Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used as per directions of Engineer-in-Charge. including carriage of material in all leads and lifts.
6901
159413
23.1
Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand : 16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding cost of form work screed laid under flooring including carriage of mterial on all leads and lifts.
36.06
197543
5478.2
Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of material in all leads and lifts.
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
179.51
44087
245.6
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
628.1
331322
527.5
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
2436.27
1474674
605.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
2398.85
1179274
491.6
Columns, Pillars, Piers, Abutments, Posts and Struts
1037.23
617960
595.78
Stairs, (excluding landings) except spiralstaircases.
52.56
20955
398.7
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
158.4
136239
860.1
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
8.34
2048
245.6
Edges of slabs and breaks in floors and walls Under 20 cm wide
322.67
83700
259.4
Cornices and mouldings
39.66
37446
944.2
weather shade, chajjas, corbels etc. including edges.
145.17
146636
1010.1
Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
3303.77
1742738
527.5
Providing weepholes in brick masonry/stone masonry/plain reincorced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawings facae complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.
1870
665720
356
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material in all leads and lifts.
34666.89
3931225
113.4
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material in all leads and lifts.
99198.75
11249138
113.4
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including carriage of material in all leds and lifts.
265.5
13009
49
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Add for using extra cement in the items of design mix over and above the specified cement content therein. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Extra for providing richer mixes at all floor levels. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of material in all leads and lifts.
-
-
-
All works upto plinth level
257.39
2178240
8462.8
All works above plinth level upto floor V level
793.59
7644573
9632.9
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts
401.45
4055006
10100.9
Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. including carriage of material in all leads and lifts.
1143.6
1053255
921
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts.
1.01
9245
9153.9
Half brick masonry with comman burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts
1492.5
1810551
1213.1
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
3
3243
1081.3
Stone filling behind retaining wall including carriage of material in all leads and lifts.
464.25
786996
1695.2
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.
39.34
236622
6014.8
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete including carriage of material in all leads and lifts.(a) 8mm thick Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble
1755.6
4692192
2672.7
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts.
26862.75
3484098
129.7
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
7316
1172754
160.3
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of material in all leads & lifts.
410.28
388863
947.8
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of material in all leads & lifts. (a) M.S. tube
180.78
28201
156
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads & lifts.
300.12
245888
819.3
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads & lifts. (a) 40 mm thick with 20 mm nominal size stone aggregate.
60.75
29396
483.9
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement including carriage of material in all leads & lifts. (a) 18 mm thick
5.34
2550
477.6
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. including carriage of material within all leads & lifts.
45.6
353386
7749.7
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) including carriage of material in all leads and lifts. (a) Light shade pigment using white cement.
249.44
365304
1464.5
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of including carriage of material in all leads and lifts. (a) Light shade pigment using white cement.
16.83
31801
1889.6
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). including carriage of material in all leads and lifts. (a) Light shade pigment using white cement.
43.2
50846
1177
Providing and laying vitrified floor tiles as per sample approved by the Engineer-in- charge (thickness not less than 10mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts.
1364.48
1998280
1464.5
Providing and laying Vitrified tiles as per sample approved by the Engineer-in- charge (thickness not less than 8 mm)with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. including carriage of material in all leads and lifts.
104.4
155629
1490.7
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge including carriage of material in all leads & lifts. (a) Size of Tile 600x600 mm.
1568.8
417928
266.4
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant of any size manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.
133.06
269892
2028.35
Providing and fixing 1st quality digital glazed tiles conforming to IS : 15622 (thickness not less than 6mm ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads & lifts.
197.28
216633
1098.1
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including carriage of material in all leads & lifts. (a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
232.65
898982
3864.1
50 mm thick cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 gradedstone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement,including carriage of material in all leads and lifts.
21.25
12080
568.5
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. including carriage of material in all leads and lifts.
2022.25
2049550
1013.5
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of material in all leads & lifts.
925.36
1319378
1425.8
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete including carriage of material in all leads & lifts.
-
-
-
Ridges plain (500 - 600mm)
161.58
120360
744.9
Flashings/ Aprons.( Upto 600 mm)
79.22
54638
689.7
Gutter (600 mm over all girth)
122.01
202756
1661.8
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design including carriage of material in all leads and lifts.(a) In 75x75 mm deep chase
74.76
19340
258.7
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including carriage of material in all leads and lifts.
12
3234
269.5
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) including carriage of material in all leads and lifts. (a) 6 mm thick Cement fiber board as per IS: 14862
124.38
96892
779
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge, (Base members of steel work shall be measured and paid separately) including carriage of material in all leads and lifts.
190.58
412605
2165
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material in all leads and lifts. (a) 110 mm diameter
226.6
101018
445.8
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material in all leads and lifts
-
-
-
Single tee with door 110x110x110 mm
20
4794
239.7
Single tee without door 110x110x110 mm
20
4366
218.3
Bend 87.5° 110 mm bend
20
3450
172.5
Shoe (Plain) 110 mm Shoe
20
3734
186.7
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.including carriage of material in all leads and lifts:-110 mm diameter
200
60560
302.8
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete including carriage of material in all leads and lifts. (a) With residual type petroleum bitumen of grade VG -10
107.68
13384
124.3
CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts
1778.68
472773
265.8
CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts
3585.73
1141337
318.3
20 mm Cement plaster 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement including carriage of material in all leads and lifts
59.82
21457
358.7
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including carriage of material in all leads and lifts.
153.06
55269
361.1
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts
2415.29
482816
199.9
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts.
6001.02
807137
134.5
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of material in all leads and lifts.
1778.6
278350
156.5
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications (a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.
1269.51
160593
126.5
Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including carriage of material in all leads and lifts
1074.51
48567
45.2
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work including carriage of material in all leads and lifts.
1792.86
197573
110.2
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts.
6001.02
667313
111.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material in all leads and lifts.
-
-
-
For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
6329.16
4517754
713.8
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) including carriage of material in all leads and lifts.
8222.81
6568380
798.8
Providing and fixing cement bonded particle board 8 mm thick for ceiling of approved quality with butt jointing nail ( frame work and cover fillets to be paid for separately) including carriage of material in all leads and lifts.
143.6
139205
969.4
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including carriage of material in all leads and lifts.
-
-
-
With float glass panes of 4.0 mm thickness weight not less than 10.00 kg / sqm
348.07
349914
1005.3
With float glass panes of 8 mm thickness weight not less than 20.00 kg / sqm
6.84
9913
1449.4
Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching beading including carriage of material in all leads and lifts.
152.99
192186
1256.2
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.including carriage of material in all leads and lifts. (a) With brass cover plate minimum 1.25 mm thickness
14
38428
2744.9
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment) including carriage of material in all leads and lifts.
1044.21
711942
681.8
Fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (L.R.)
-
-
-
300x16mm
55
2337
42.5
250x16mm
17
722
42.5
Fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete including carriage of material in all leads and lifts. (L.R.)
-
-
-
250x10mm
134
1125
8.4
200x10mm
99
831
8.4
150x10mm
616
5174
8.4
Fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (L.R.)
-
-
-
125mm
166
846
5.1
100mm
52
265
5.1
75mm
532
2713
5.1
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of material in all leads and lifts.
266
24073
90.5
Fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (a) Twin rubber stopper. (L.R.)
46
338
7.35
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) including carriage of material in all leads and lifts. (a) 18 mm thick.
45.72
56482
1235.4
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including carriage of material in all leads and lifts. (a) 18 mm thick.
24.12
29284
1214.1
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete including carriage of material in all leads and lifts.
33
21562
653.4
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete including carriage of material in all leads and lifts. (a)Overall width 35 mm.
21.6
5242
242.7
Fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete including carriage of material in all leads and lifts. (L.R.)
12
1734
144.55
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen including carriage of material in all leads and lifts. Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofingcompound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
323.85
217173
670.6
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) including carriage of material in all leads and lifts.
129.66
9750
75.2
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.) including carriage of material in all leads and lifts.
129.66
180408
1391.4
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts.
88.7
51738
583.3
Making chases up to 7.5x7.5 cm in walls for G.I. pipe and filling the same with cement concrete 1:3:6 ( 1 cement: 3 Sand: 6 graded stone aggregate 20 mm down gauge )and finishing with matching surface after housing G.I. pipe etc. including carriage of material in all leads and lifts.
318.33
42242
132.7
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. INTERNAL WORK - EXPOSED ON WALL including carriage of material in all leads and lifts.
-
-
-
1216 (16 mm OD) pipe
318.33
124244
390.3
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work including carriage of material in all leads and lifts.
-
-
-
1216 (16 mm OD) pipe
144.5
53855
372.7
1620 (20 mm OD) pipe
256.2
111600
435.6
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work including carriage of material in all leads and lifts.(a) 32 mm dia nominal bore
45
19314
429.2
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts:-25 to 40 mm nominal bore
7
4116
588.1
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:-1000 litres net capacity tank.
7
101901
14557.4
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia.
260.31
135543
520.7
75 mm dia.
410.7
170933
416.2
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia
120
18264
152.2
75 mm dia
160
13664
85.4
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia.
40
17468
436.7
75 mm dia.
60
24498
408.3
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia
40
16220
405.5
75 mm dia
60
15960
266
Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia
40
20200
505
75 mm dia
60
27312
455.2
Providing and fixing PVC collers ISI marked of approved design fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia
80
18208
227.6
75 mm dia
100
20910
209.1
Providing and fixing PVC Cowl ISI marked of approved design fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
110 mm dia
17
2419
142.3
75 mm dia
16
2003
125.2
Fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts:-110 mm X 75 mm. (L.R.)
81
64127
791.7
Fixing vitreous china wash down water closet (European type WC pan) with intergal "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement :1 sand)Plastic seat and cover to be measured and paid for seperately including carriage of material in all leads and lifts confirming to BIS specification Ist quality:-(a) Anglo Indian (Universal closet) (L.R.)
17
15475
910.35
Fixing PTMT Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of material in all leads and lifts. (L.R.)
17
12399
729.4
Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. (a) Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern (L.R.)
17
15190
893.55
Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required including carriage of material in all leads and lifts. (a) Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. (L.R.)
6
5361
893.55
Fixing plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. (i) Solid type: (a) White plastic seat and cover (confirming to BIS Specifications). including carriage of material in all leads and lifts. (L.R.)
17
684
40.25
Fixing PTMT jet spray of approved quality with 1.5 mtr. tube. (confirming to BIS Specifications). including carriage of material in all leads and lifts. (L.R.)
17
821
48.3
Fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.(i) 610mmx510mm with bowl depth 200 mm (confirming to BIS Specifications) including carriage of material in all leads and lifts. (L.R.)
4
4098
1024.62
Fixing Mixer for kitchen sink with casted swinging spout at top confirming to BIS specifications, including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
2
96
48.3
Fixing vitreous china wash basin with single/double hole for pillar tap with C.I. Or M.S brackets painted white including cutting holes and making good the same but excluding fittings (a) Flat back (ii) 550mmx400mm including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)(L.R.)
16
16268
1016.75
Fixing division plate for urinals 600mmx330mm size including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
17
4420
260.05
Fixing vitreous china padestal for wash basin complete recessed at the back for the reception of pipes and fittings confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
16
2704
169.05
Fixing C.P. brass waste for wash basin or sink 32 mm dia confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
17
684
40.25
Fixing 100 mm dia cromium plated stainless steel grating confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
81
1701
21
Fixing of M.I. Union for wash basin or sink 32 mm dia. confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
17
684
40.25
Fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA). (L.R.)
16
8752
547.05
Fixing 600mmx120mm glass shelf with C.P brass brackets and guard rail complet fixed to wooden plugs with C.P Brass screws confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA). (L.R.)
16
7896
493.5
Fixing 750mmx20mm size C.P Brass towel rail complete with C.P Brass brackets fixed to wooden plugs with C.P brass screws confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA). (L.R.)
12
3284
273.7
Fixing C.P. brass towel ring complete fixed on wall face with concealed fittings arrangement, and confirming to BIS specifications including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
16
4379
273.7
Fixing C.P. brass soap dish with C.P.brass brackets fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications,including carriage of material in all leads and lifts. (L.R.)
16
3203
200.2
Fixing 15mm dia C.P. brass bib tap with capstan head including carriage of material in all leads & lifts. (Confirming to BIS Specifications) (L.R.)
39
955
24.5
Fixing C.P. Brass shower rose with 15mm or 20mm inlet 150 mm dia including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
2
42
21
Fixing C.P brass 15 mm dia bib taps with capstan head with aerator confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
38
931
24.5
Fixing C.P.brass angle valve 15mm without nuts and pipe confirming to BIS specifcation including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA) (L.R.)
106
2226
21
Fixing 15mm dia C.P. brass concealed stop cock (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA) (L.R.)
4
84
21
Fixing brass full way value with wheel (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA) (L.R.)
-
-
-
15mm nominal bore.
21
514
24.5
20 mm nominal bore.
21
514
24.5
32 mm nominal bore.
10
287
28.75
Fixing G.I./M.I. Union of following sizes (where not included in the item) (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA) (L.R.)
-
-
-
15mm
21
441
21
20 mm
21
441
21
32 mm
10
210
21
Fixing P.V.C connection pipe with bras unions. (a) 30cm length / 45 cm length (I) 15mm Nominal size bore (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA) (L.R.)
110
2310
21
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material in all leads and lifts:-. 32mm dia
18
4876
270.9
Providing and fixing stone ware gully trap grade 'A' complete with C.I. Grating, brick masonary chamber in cement mortar 1:5 and water tight C.I. Cover with frame of 300mmx300mm size (inside)the weight of cover to be not less than 4.53 kg and frame tobe not less than 2.72 kg. including carriage of material in all lead and lifts. (I) 1 square mouth traps (i) 100mmx100mm (P-Type).
21
132913
6329.2
Cutting holes through existing brick/stone work including making good the same in cement mortar 1:6( 1cement:6 sand) per cms. Depth of cutting including carriage of material in all leads and lifts(i) Holes up to and including 400 sqcm in area.
1500
12150
8.1
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 incuding carriage of material in all leads and lifts. (a) 150 mm nominal diameter. (Class K-7).
128
299916
2343.1
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket incuding carriage of material in all leads and lifts.
20
2822
141.1
Constructing manhole with RCC top slab in 1:2:4 mixure (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing. including carriage of material in all leads and lifts.
-
-
-
Inside size 800x800mm and 500mm deep including SFRC Cover with frame (medium duty) total weight of cover and frame to be not less than 173 kg (weight of cover 103kg on and weight of frame 70 kg With 230 mm walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand)
5
61075
12215
Inside size 800x800 mm and 1000 mm deep deep including SFRC Cover with frame (medium duty) total weight of cover and frame to be not less than 173 kg (weight of cover 103 kg on and weight of frame 70 kg With 230 mm walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand).
5
85589
17117.8
Providing 200 mm wide cast iron Rungs with chequered or ribbed non slip surface including fixing in manholes with 200 mm x 200 mm x 100 mm cement concrete 1:3:6 (1Cement:3Sand:6graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts.
20
5728
286.4
Supplying and fixing cast iron cover with frame for manhole of 500mm internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58 kg including carriage of material in all leads and lifts.
1
3473
3473
Constructing soak pit 2.5 metre diametre 3.00 metre deep with45x45cm dry brick honey comb shaft with bricks of class designation 75 and soil waste drain pipe 100mm diameter 1.80 metre long as per standard design with F.P.S. including carriage of material in all leads and lifts.
1
22989
22989.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements