Housing And Urban Development Authority Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Civil And Construction
Eprocure
Opening Date14 Aug 2019
Closing Date24 Aug 2019
Tender Amount₹ 1,10,00,480
Costs
EMD
₹ 1,42,510Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Model Central Jail At Nahan Distt Sirmour Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HIMUD_30875_1Bid Award Id
ViewTender No
NO HIMUDA ND E TENDER 2019 1326 42 DATED 06 08 201Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Model Central Jail at Nahan Distt Sirmour HP SH Construction of Warder Line with Parking Floor including Internal Water Supply Sanitary Installation and C O 7000 Litre Capacity Rain Water Harvesting tank
BOQ Items
... More
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.
-
-
-
... More
Foundation, footing bases of columns etc. and mass concrete.
55.2
-
-
... More
Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto any thickness.
898.98
-
-
... More
Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
471.8
-
-
... More
Columns, pillars, posts and struts Circular or curved in plan..
2.54
-
-
... More
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.
9
-
-
... More
Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels of any depth.
821.55
-
-
... More
Stair cases with sloping or stepped soffits excluding landing.
91.53
-
-
... More
Edges of slabs and breaks in floors and walls under 20cm wide.
228.12
-
-
... More
Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.
31.5
-
-
... More
Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.
49.26
-
-
... More
Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand :16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding cost of form work screed laid under flooring including carriage of material in all leads & lifts.
41.32
-
-
... More
Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand :16 graded Brick Blast 40 mm nominal size) and curing complete on depresed portion of slab and floor excluding cost of form work including carriage of material in all leads & lifts.
19.88
-
-
... More
Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
20.79
-
-
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
186.23
-
-
... More
Column, pillars, posts and struts upto all heights
43.46
-
-
... More
Walls (any thickness but not less than 0.10metre thickness) including attached pilasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.
2.38
-
-
... More
Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.
5.22
-
-
... More
Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface including centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.
1.28
-
-
... More
Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.
315.48
-
-
... More
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
35793.36
-
-
... More
Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
105.46
-
-
... More
Brick work using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 sand) including carriage of material in all leads and lifts.
6.93
-
-
... More
Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
414.36
-
-
... More
Providing and fixing 125x60mm double rebate door frame fabricated from section roll formed out of 1.2mm thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr. The frame section should be cut to length of mtr joined with corner bracket made of CRCA electroplated . The frame should be provided with 3 Nos . of MS powder coated 4" Butt hinges of 2mm thickness welded to the main frames, 6 Nos. of 1.2 mm thick CRCA electroplated stiffeners should be welded to frame, 6Nos. of 8" MS hold fasts with split end tail welded to stiffner plates, One No. aldrop reciever,each frame should be provided with 25 x 50 mm tie rod at bottom and all welded placed should be treated with protective coat of zinc rich primer and the entire frame should be provided with a coat of etch primer. including carriage of material in all leads and lifts.
130.8
-
-
... More
Providing and fixing 105x60mm Single rebate door frame fabricated from section roll formed out of 1.2mm thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr. The overall size of the section should be 105x60mm with rebate of 37mm for shutter. The frame section should be cut to length of mtr joined with corner bracket made of CRCA electroplated . The frame should be provided with 3 Nos . of MS powder coated 4" Butt hinges of 2mm thickness welded to the frames, 6 Nos. of 1.2 mm thick CRCA electroplated stiffeners should be welded to frame including carriage of material in all leads and lifts.
136.5
-
-
... More
Providing and fixing Eco 5000 Series (Air Tight with double rebate) Windows fabricated from roll formed section made of galvanized steel colour coated/powder coated (Base steel as per IS 513 "D" QUALITY , galvanized as per IS 277 with Zinc of 120grm per Sqm) with total coated thickness of 0.60mm. Glass shutter and fixed glass portions should be provided with a glass of 4mm Plain Float Glass, Mesh shutter should be provided with a stianless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch. Windows should be provided with grill made of 10mm sq. MS Bars welded to at 150mm center-to-center , 6mmx12mm MS Flat. total grill unit should be powder coated and fixed to window frame with screws including carriage of material in all leads and lifts.
138.25
-
-
... More
Providing and fixing 6.00 mm thick Bakelite Sheet insert in aluminium door, window, vantilator etc. with PVC/neoprene gaskets etc. as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium shutter snap beading shall be paid in basic item.) : Including carriage of material in all leads and lifts.
88.2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium shutter snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. including carriage of material in all leads and lifts.
8.46
-
-
... More
Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm to doors, windows and clerestory windows insert in aluminum shutter with PVC/ neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium shutter shall be paid in basic item.) including carriage of material in all leads .and lifts.
26.46
-
-
... More
Providing and fixing powder coated aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) including carriage of material in all leads .and lifts.
1141.22
-
-
... More
Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material in all leads and lifts.
86.4
-
-
... More
Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. including carriage of material in all leads and lifts.
86.4
-
-
... More
Providing and fixing powder coated aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.
-
-
-
... More
300 x 16mm
3
-
-
... More
250 x 16mm
48
-
-
... More
Providing and fixing powder coated aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts. 250 x 10 mm
108
-
-
... More
Providing and fixing powder coated aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of material in all leads & lifts. 125mm
108
-
-
... More
Providing and fixing oxidized M.S. hasps and stapples (safety type) with necessary screws etc. complete including carriage of material in all leads and lifts. 150mm
12
-
-
... More
Providing and fixing oxidized M.S. single acting spring hinges with necessary screws etc. complete including carriage of material in all leads and lifts. 150mm
20
-
-
... More
Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.
49
-
-
... More
Providing and laying 20mm nominal dia of stainless steel curtain rod. including carriage of material in all leads and lifts.
39
-
-
... More
Providing & fixing Digital glazed tile i/c border wherever required 8mm thick of any size and any colour as per sample approved by the Engineer-in-Charge i/c cost for cutting the tiles where required in skirting, risers of steps and dado upto all height on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry i/c carriage of material in all leads and lifts. Make:- NITCO, Kajaria or Orient
274.56
-
-
... More
Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of material in all leads & lifts. 25mm thick
139.57
-
-
... More
Kota stone slab 25 mm thick single piece in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material in all leads & lifts.
7.9
-
-
... More
Providing and laying Vitrified tile porsilano Stain Resistance having thickness 9mm or more ,water absorption less than 2.5%& flexural strength 39 N/Sqmm.in flooring (of any size) treads of steps laid on a bed of 12mm thick cement mortar 1:3(1 cement:3sand) finished with flush pointing in white cement. The shade & sample to be approved by the Engineer-in-Charge i/c cutting the tiles wherever required including carriage of material in all leads and lifts.(Nitco or Orient Make).
372.56
-
-
... More
Providing and laying vetrified tiles (of any size and any colour/shade) thickness not less than 8mm in skiring, risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete i/c cost of cutting tiles wherever required including carriage of material in all leads and lifts. Make:- NITCO, Kajaria or Orient
31.81
-
-
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant of any size manufactured of approved shade and colour of NITCO, NTC, GICO in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of cutting the tiles where required to be cut i/c carriage of material in all leads & lifts. Make:- NITCO, Kajaria or Orient
67.56
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stoneaggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement. Including carriage of material in all leads and lifts 40 mm thick.
138.32
-
-
... More
Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks Including carriage of material in all leads and lifts
236.48
-
-
... More
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material in all leads and lifts.
465.79
-
-
... More
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of material in all leads and lifts.
96.11
-
-
... More
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all leads and lifts.
41.6
-
-
... More
Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.
11.2
-
-
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) i/c carriage of material in all leads and lifts.
119.24
-
-
... More
Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of material in all leads and lifts. 0.63mm thick sheet.
53.72
-
-
... More
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete Including carriage of material in all leads and lifts.
-
-
-
... More
100mm dia pipe
26
-
-
... More
150mm dia pipes
99.6
-
-
... More
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete Including carriage of material in all leads and lifts.
-
-
-
... More
PVC Plain bend 150mm dia
16
-
-
... More
PVC shoe 150mm dia
16
-
-
... More
PVC Plain bend 100mm dia
2
-
-
... More
Providing and fixing M.S..holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc including carriage of material in all leads and lifts. 150 mm dia.
48
-
-
... More
Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts. In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like including carriage of material in all leads and lifts.
163.02
-
-
... More
Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete including carriage of material in all leads and lifts.
1.5
-
-
... More
Providing and fixing Stainless Steel railing in staicase and balconies including fixing in position complite as per approved design by the directions of Engineer-in-charge including carriage of material in all leads and lifts.
94.08
-
-
... More
Providing and fixing Stainless Steel 3" dia vertical post in staircase and balconies as per sample approved design by the directions of Engineer-in-charge including carriage of material in all leads and lifts.
32
-
-
... More
Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool scrapes and sand papering complete including carriage of material in all leads and lifts.(a) With ready mixed priming paint brushing red lead,red oxide/zinc oxide chrome.
32.32
-
-
... More
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts.(a) Enamel paint other than white/White paint
151.56
-
-
... More
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.
740.95
-
-
... More
6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.
893.98
-
-
... More
10mm cement plaster in single coat on fair side of brick /stone masonry for interior /exterior plastering upto all heights including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girths and finished even and smooth in cement mortar 1:4(1cement :4sand) including carriage of material in all leads & lifts.
19.85
-
-
... More
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.
1024.75
-
-
... More
20 mm cement plaster in single coat on rough side of brick / stone masonry for interior/exterior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
1024.75
-
-
... More
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.
2943.48
-
-
... More
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer ofapproved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of material in all leads and lifts.
-
-
-
... More
On Wall.
1308.55
-
-
... More
On Ceiling.
893.98
-
-
... More
Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement :3sand :6 graded stone aggregate 20 mm nominal size) including finishing the top surface of concrete smooth complete including carriage of material in all leads and lifts.
72.72
-
-
... More
Providing under layer for plinth protection of 75 mm thick ( unconsolidated) bed of dry bricks/stone aggregate 40 mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.
72.72
-
-
... More
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads. and lifts.
80.8
-
-
... More
Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe)including carriage of material in all leads. and lifts.
127.2
-
-
... More
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including carriage of material in all leads and lifts.
-
-
-
... More
15mm nominal bore
52
-
-
... More
20mm nominal bore
75.2
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).
4
-
-
... More
Constructing chamber 300mm X 300mmX500mm inside sizes for water meter or stop cock with C.I. Surface box 100mmX 100mm X75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )75mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1cement:3 sand finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 115 mm thick walls brick masonry in cement mortar 1:5(1cement:5 sand)
4
-
-
... More
Construction chamber for sluice valve with C.I. Surface box 100mm x160mmx180mm inside with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete including carriage of material in all leads and lifts. with 230 mm thick walls of brick masonry in cement mortar 1:5(1 cement: 5 sand)
1
-
-
... More
Providing and fixing C.I. Sluice valve(With hand wheel) as per IS-780 class upto 300mm dia (including brass spindle and as per IS:2906 Class-II for diametres more than 300mm complete with bolts , nuts, rubber insertion etc. (the tail pieces if required shall be measured and paid for seperetaly)including carriage of material in all leads and lifts. (a) 150mm nominal size.
1
-
-
... More
Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately). including carriage of material in all leads and lifts. 40mm nominal bore
50
-
-
... More
Providing and laying in trenches, galvanised mild steel tubes (light grade), tube fittings (earth work in trenches to be measured and paid separately)including carriage of material in all leads and lifts. 20mm nominal bore
38
-
-
... More
Providing and fixing vitreous china wash down water closet (europeon type wc pan) i/c connecting the flush bend with cistern and closet with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement: 1sand) seat & cover to be measured & paid for separately confirming to BIS specification Including carriage of material in all leads & lifts.Odrdinary closet Hindware/ Cera make.
6
-
-
... More
Providing and fixing to PTMT colored/white high density polyethylene / poly propylene 10 litres capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). including carriage of material in all leads and lifts
6
-
-
... More
Providing and fixing plastic seat (solid/ hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers Solid type white plastic seat and cover confirming to BIS specification including carriage of material in all leads and lifts.
6
-
-
... More
Providing & fixing vitreous China wash basin with single/double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads & lifts. Hindware/ Cera make (a) Flat back 550mmx400mm
8
-
-
... More
Providing and fixing Vitreous China pedstal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads & lifts. (a) Vitreous China
4
-
-
... More
Providing & fixing C.P. brass waste for wash basin or sink including carriage of material in all leads & lifts. 32 mm dia
8
-
-
... More
Providing and fixing PVC waste pipe for wash basin and sink including carriage of material inall leads & lifts. 32 mm dia
6
-
-
... More
Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers incliding carriage of material in all leads & lifts.
4
-
-
... More
Providing and fixing 600mmx20mm C.P. brass towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing 15mm dia PTMT Jet spray of approved quality & colour with 1.00 metre tube including screws etc. complete in all respect incliding carriage of material in all leads & lifts.
6
-
-
... More
Providing and fixing 600mmx120mm glass shelf with C.P. Brass brackets and guard rail complete, fixed to wooden plugs with C.P. Brass screws. Including carriage of material in all leads and lifts.
4
-
-
... More
Providing and fixing C.P. brass toilet paper holder including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats Including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing C.P. Brass shower rose with 15mm or 20mm inlet including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing 15mm dia C.P. Brass bib tap with capstan head including carriage of material in all leads and lifts.
-
-
-
... More
Long Body
12
-
-
... More
Short Body
12
-
-
... More
Providing and fixing 15mm dia C.P Brass pillar tap with Capstan head including carriage of material in all leads and lifts.
8
-
-
... More
Providing and fixing 15mm dia C.P. Brass angle valve with nuts & pipe including carriage of material in all leads and lifts.
8
-
-
... More
Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts.
-
-
-
... More
15mm nominal bore
8
-
-
... More
20mm nominal bore
8
-
-
... More
Providing and fixing G.I./M.I Union of following sizes (Where not included in the items including carriage of material in all leads and lifts.
-
-
-
... More
15mm nominal bore
29
-
-
... More
20mm nominal bore
8
-
-
... More
40mm nominal bore
4
-
-
... More
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank including carriage of material in all leads and lifts.
5
-
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in leads and lifts.
-
-
-
... More
75mm dia
96
-
-
... More
110mm dia
44
-
-
... More
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
75mm dia
6
-
-
... More
110mm dia
6
-
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.
complete including carriage of material in all leads and lifts.
-
-
-
... More
75mm dia
12
-
-
... More
110mm dia
12
-
-
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
75 mm dia
12
-
-
... More
110mm dia
12
-
-
... More
Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. including carriage of material in all leads and lifts.
-
-
-
... More
75 mm dia
39
-
-
... More
110mm dia
35
-
-
... More
Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement : 3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng including carriage of materials in all leads and lifts. (i) Inside size 800x800x 500mm including S.F.R.C. manhole frame and cover medium duty 560mm internal diametre . The total weight of cover and frmae to be not less than 173 Kg(weight of cover 70 Kg and weight of frame 103 Kg) (a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3(1 cement : 3 sand).
5
-
-
... More
Extra over item No. 30 for every additional depth of 0.10 Metre or part thereof of manhole (a) From 0.5 Metre upto 1.00 Metre depth
0.75
-
-
... More
Cutting holes through existing brick/Stone/concrete work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting including carriage of materials in all leads and lifts. (i) Holes upto and including 400 sqcm in area
368
-
-
... More
Making connections of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 sand) finished with a floating coat of neat cement and making necessary channels with cement concrete 1:2;4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) for the drain complete. For pipe 100mm to 150mm internal diameter / nominal size.
1
-
-
... More
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in leads and lifts. (i)110mmx75mm
20
-
-
... More
Supplying and fixing S.F.R.C. cover with frame for manholes/RWHT of 560mm internal diameter (Medium duty) the total weight of cover and frmae to be not less than 173 Kg(weight of cover 70 Kg and weight of frame 103 Kg) including carriage of materials in all leads and lifts.
1
-
-
... More
Supplying and fixing 2.00 H.P. motor for lifting the water from RWHT to PVC tank including carriage of material in all leads and lifts.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements