Housing And Urban Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Eprocure
Opening Date9 Jun 2021
Closing Date24 Jun 2021
Tender AmountRefer Documents
Costs
EMD
₹ 3,59,620Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Civil Hospital Building At Bharmour Distt Chamba Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HIMUD_48256_1Bid Award Id
ViewTender No
HIMUDA/DD/CB/W-7/2020-814-38Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.
-
-
-
... More
Foundation, footing bases of columns etc. and mass concrete.
39.83
-
-
... More
Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
65.5
-
-
... More
Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all heights from floors.
89.47
-
-
... More
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.
311.62
-
-
... More
Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.
25.45
-
-
... More
Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
95.3
-
-
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
74.37
-
-
... More
Column, pillars, posts and struts upto all heights
9.66
-
-
... More
Walls (any thickness but not less than 0.10metre thickness) including attached pilasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.
46.74
-
-
... More
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
27128.4
-
-
... More
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately) including carriage of material in all leads and lifts.
781.59
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including carriage of material in all leads and lifts.
106.05
-
-
... More
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it water tight.
-
-
-
... More
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
... More
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories.
-
-
-
... More
1). Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
2). Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
3). Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
4). Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330- 10 testing method for a range upto 50 mm
5). Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test Tests to be conducted on site.
6). Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
-
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of above item) including carriage of material in all leads and lifts.
106.05
-
-
... More
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
-
-
-
... More
Providing and fixing in position, 200 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall, kept at 120-135 mm gap and connected by the zig zag G.I. wire of 3 mm dia at alternate row by welding (at an angle ranging from 50-70 degree) . The EPS core shall consist of 100 mm thick EPS of density not less than 20 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 50 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge.
545.7
-
-
... More
Providing and fixing in position, 130 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 60 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of hotcreting/ guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge.
74.09
-
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge.(Cost of SS ball bearing hinges is excluded) including carriage of material in all leads and lifts.
56.7
-
-
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge,with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).including carriage of material in all leads and lifts.
22.05
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(a)Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) including carriage of material in all leads and lifts.
391.32
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter- ocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge including carriage of material in all leads and lifts. (a) With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles .
781.59
-
-
... More
Precast terrazzo chequred tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles medium shade including carriage of material in all leads and lifts.
618.38
-
-
... More
Providing and laying Duro stone vetrified tiles(10mm thick any size) in grey/coloured or of approved shade in flooring ,treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3( 1 cement; 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete , including carriage of material in all leads and lifts.
82.77
-
-
... More
Providing and laying Duro stone vetrified tiles(8mm thick any size) in grey/coloured of required shade in skirting risers of steps and dados on 12 mm thick cement mortar 1:3 (1 cement:3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete , including carriage of material in all leads and lifts.
11.85
-
-
... More
Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring ,treads of steps and landings laid over 12mm thick cement mortor 1:3(1 cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and llifts
13.69
-
-
... More
Providing & fixing digital tiles 8mm thick of any size and any colour as per where required in skirting, risers of steps and dado on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry including carriage of material in all leads and lifts.
53.84
-
-
... More
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.
233.25
-
-
... More
Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.
30.06
-
-
... More
Steel work bolted in built up sections,including cutting , hoisting ,fixing in position and applying a priming coat of red lead paint. including carriage of material in all leads and lifts.
-
-
-
... More
In R.S. joists,channels,angles tees,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters, purlins connected to common rafter and the like.
530.41
-
-
... More
Steel work welded in built up sections,trusses and framed work , including cutting , hosting,fixing in position and apply ing a priming coat of red lead paint, including carriage of material in all leads and lifts.
-
-
-
... More
In beams joists channels,angles,tees,flats with connection plates or angle cleats as in main and cross beams ,hip and jack rafters, purlins connected to common rafters and the like.
81.63
-
-
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/ facia/ soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge, (Base members of steel work shall be measured and paid separately) including carriage of material in all leads and lifts.
58.2
-
-
... More
Providing and fixing stainless steel railing mark-36 pipe size top-2' pipe, post pipe 1" and 3' hight in staircase including necessary fittings and positions complete as per design approved by the Engineer-In-Charge including carriage of materials in all leads and lifts.
607.75
-
-
... More
10mm cement plaster in cement mortar 1:6 (1 cement:6 sand) single coat on fair/rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
789.7
-
-
... More
15mm cement plaster in cement mortar 1:6 (1 cement:6 sand) single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
224.94
-
-
... More
20mm cement plaster in cement mortar 1:6 (1cement: 6sand) single coat on rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
224.94
-
-
... More
Applying Birla white wall care putty over plaster surface after througly brushing the surface free from mortar drops ,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, including carriage of material in all leads and lifts.
1239.58
-
-
... More
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc., including sand paper smooth complete including carriage of material in all leads and lifts.
619.79
-
-
... More
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand pape red smooth including applying of putty a required for metling the surface including carriage of material in all leads and lifts.
619.79
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge.(The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment including carriage of material in all leads and lifts.
689.33
-
-
... More
Painting two coats (excluding priming coat ) on new steel & other metal surfaces with enamal paint brushing oil, grease to give an even shade including cleaning the surface of all dirt mdust and other foreign matter including carriage of material in all leads and lifts.(a) Enemal paint other than white.
44.59
-
-
... More
Providing and fixing to wall ceiling and floor Polyethylene – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe confirming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply , capable to withstand temperature up to 80 degree C , including all special fittings, Composite material (Engineering plastic blend and brass inserts wherever required) e.g. elbows, tees.reducers. couplers & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of the Engineer-In-charge including carriage of material in all leads and lifts.
-
-
-
... More
1216 (16 mm OD pipe).
66.9
-
-
... More
Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I inlet and outlet connection , 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level including carriage of material in all leads and lifts.1000 ltrs net capacity storage tank
2
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. confirming to B.I.S specification including carriage of material in all leads and lifts.
2
-
-
... More
Providing and fixing 110x75mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive,cost of cutting and making good the wall and floors etc, complete including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc., comlete including carriage of material in all leads and lifts.
-
-
-
... More
90 mm dia.
26.5
-
-
... More
110mm dia.
20.5
-
-
... More
Providing and fixing PVC door bend with oval access door,insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
90mm dia.
3
-
-
... More
110mm dia.
3
-
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc., complete including carriage of material in all leads and lifts.
-
-
-
... More
90mm dia.
15
-
-
... More
110mm dia.
12
-
-
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc, complete ,including carriage of material in all leads and lifts.
-
-
-
... More
90 mm dia.
3
-
-
... More
110mm dia.
3
-
-
... More
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
90mm dia.
2
-
-
... More
110mm dia.
2
-
-
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
90mm dia.
18
-
-
... More
110mm dia.
18
-
-
... More
Providing and fixing PTMT Coloured/white high density polyethene/poly propylene 10 liters capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve,syphon,15mm nominal size PVC ball valve with polythene float ,with push button,couplings for constructions with inlet,outlet and over flow pipe,40mm dia C.P. flush bend including cutting holes in walls and making good the same and connectiong the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing water closet W.C. pan wall hanging with cistern and P.P. soft closet seat cover and hinges complete including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. Or M.S. brackets painted white including cutting holes and making good the same but excluding fitting and confirming to BIS specifications including carriage of material in all leads and lifts.(a) (a) Flat back (i) 630mmx450mm
3
-
-
... More
Providing and fixing PTMT Jet Spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing 32 mm C.P. Brass waste for wash basin or sink including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing 32 mm dia M.I. Union for wash basin or sink including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing 600mmx450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brassscrews and washers including carriage of material in all leads and lifts.
3
-
-
... More
Providig and fixing C.P. brass towel rail complete C.P. brass brackets (fixed to wooden plugs with C.P. brass screws confirming to BIS specifications 600 mm x20mm including carriage of material in all leads and lifts.
3
-
-
... More
Providig and fixing C.P. brass towel ring complete C.P.brass brackets ( fixed to wooden plugs with C.P. brass screws , and confirming to BIS specifications including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)
3
-
-
... More
Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications,including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing one hole basin mixing faucet (Confirming to BIS specifications) including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)
3
-
-
... More
Proving and fixing C.P. brass bib tap with capstan head- 15mm dia, and confirming to BIS specifications, including carriage of material in all leads and lifts.Long body
3
-
-
... More
Proving and fixing C.P. brass pillar tap with capstan head- 15mm dia, and confirming to BIS specifications, including carriage of material in all leads and lifts.
3
-
-
... More
Providing and fixing C.P.brass angle valve 15 mm without nuts and pipe including carriage of material in all leads and lifts .
18
-
-
... More
Providing and fixing P.V.C connection with brass unions (confirming to B.I.S.specification) including carriage of material in all leads and lifts. (a) 300/450mm length :-(i) 15mm nominal bore
13
-
-
... More
Providing and fixing 15mm nominal bore brass full way valve with wheel (confirming to B.I.S.specification) including carriage of material in all leads and lifts.
2
-
-
... More
Providing and fixing G.I./M.I Union of 15 mm sizes (where not included in the items) including carriage of material in all leads and lifts.(Confirming to BIS specification)
5
-
-
... More
Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.(a) 150 mm dia
50.5
-
-
... More
Providing and fixing stone ware gully trap grade"A" complete with C.I. grating. Brick masonary chamber in cement mortar 1:5 and water tight C.I. cover with frame of 300mmx300mm size (in side) the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72kg. including carriage of material in all leads and lifts.Square Mouth Traps: i)i) 100mmx100mm size P type.
1
-
-
... More
Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng.(a) Inside size 800mm x 800mm and 500mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.With 200mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand) including carriage of materials in all leads and lifts.
3
-
-
... More
Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3 (1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng.(a) Inside size 1200 mm x 900 mm and 1000mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.With 200mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand) including carriage of materials in all leads and lifts.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements