Housing And Urban Development Authority Tender

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads and lifts. (a)1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts.

Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material in all leads and lifts. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material in all leads and lifts. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying mechanically mixed design M-25 grade cement concrete and vibrated for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Add for using extra cement in the items of design mix over and above the specified cement content therein. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Extra for providing richer mixes at all floor levels. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of material in all leads and lifts.

All works upto plinth level

All works above plinth level

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of material in all leads and lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. including carriage of material in all leads and lifts. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.

Providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers including carriage of material in all leads and lifts.

Stone soling properly hand packed filling interstces with spalls and consolidating withhand ramming to required level including spreading watering and ramming of binding materials moorum or earth etc complete as per HPPWD specification 100 mm spred thickness (finished work including matrials and labour) including carriage of material in all leads and lifts.

Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.

Stone filling behind retaining walls including carriage of material in all leads and lifts.

Supplying and placing on position of SOVISY SMC panel tanks 7.00 mtr x 6.00 mts x 3.00 mtrs having capacity 126KL for water storage as confirming with IS 14399: 1996 and material to be confirming as per IS 4249:1967 for fire retardant, required capacity of suitable size including fixing and assembling / erecting the tank complete as per direction of engineer in-charge. The tanks to be leak proof after installation and having following specifications. Standard Non – Insulated SMC Panels Hot pressed moulded UV stabilised made from Sheet Moulding Compounds (SMC) composing of glass fiber and formulation of selected resin from MENZOLIT, Germany

Providing and laying in position cement concrete of specified grade 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level including carriage of material in all leads and lifts.