Housing And Urban Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Drainage Work
Eprocure
Opening Date1 Sep 2018
Closing Date13 Sep 2018
Tender Amount₹ 3,45,23,359
Costs
EMD
₹ 3,78,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Partially Self Financing Scheme at Kamli Road Parwanoo Distt Solan HP
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_HIMUD_23270_1Bid Award Id
ViewTender No
No PD HIMUDA CB TN 2018 2521 32 dated 07 08 2018Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Running Repair Maintenance and Operation of Water Supply Scheme Ist and 2nd Stage at Parwanoo Kamli Sector 5 and Ucha Parwanoo Sector 6 Distt Solan HP for Three Year w e f 01 09 2018 to 31 08 2021
BOQ Items
... More
Excavation in earth work in all kinds of soil work such as pick work jumper work chiseling/ wedging out of hard or soft rock and disposal of all excavated earth through mechanical tyransport. The quantoty of each available after excavation will be disposed off in all leads and lifts & surplus earth to be levelled and neatly dressed as directed by the Engineer- in- charge. The serviceable material if any available will be stacked in specified dimension at site.
38.75
-
10
... More
Filling in plinth with sand under floors including watering,ramming, consolidating and dressing complete with cost of sand including carriage of material in all leads and lifts
44.36
-
10
... More
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.
-
-
-
... More
(i) Foundation, footing bases of columns etc. and mass concrete.
141.69
-
10
... More
(ii)Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like:(i) Floors, etc. upto any thickness.
1914.2
-
10
... More
(V) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.
570.04
-
10
... More
(iv) Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels upto all depth/height .
1707.29
-
10
... More
(iii) Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
1216.56
-
10
... More
Stair cases (except spiral stair cases ) excluding landing but including preparing the surfaces and finishing of nosing upto all floor level.
95.5
-
10
... More
(vi) Edges of slabs and breaks in floors and walls upto 20 Cm wide.
281.52
-
10
... More
Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.
197.71
-
10
... More
Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.
53.14
-
10
... More
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth
17.1
-
10
... More
Providing andc Laying cement concrete work 1:2:4 ( 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work includingcarriage of material in all leads and lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
1.42
-
10
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
1.42
-
10
... More
Walls ( any thickness ) including attached pillasters, buttresses, plinth & strinfg courses etc. from top of foundatioon upto all floor level
4.62
-
10
... More
Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
107.94
-
10
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
417.12
-
10
... More
Walls ( any thickness ) including attached pilasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.
26.92
-
10
... More
Column, pillars, posts and struts upto all heights
120.34
-
10
... More
Stair cases (except spiral stair cases ) excluding landing but including preparing the surfaces and finishing of nosing upto all floor level.
10.88
-
10
... More
Providing and laying cement concrete having strength of M-25 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
8.9
-
10
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
6.47
-
10
... More
Walls (any thickness ) including attached pilasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.
14.22
-
10
... More
Column, pillars, posts and struts upto all heights
0.7
-
10
... More
Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.
22.95
-
100
... More
Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand :16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding cost of form work under flooring including carriage of material in all leads & lifts.
133.2
-
100
... More
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
110452.5
-
10
... More
Applying cement slurry on R.C.C.slab or cement concrete work using 2.75 kg. of cement per sq.metre floor area before cement concrete flooring including roughening, cleaning of the concrete surfaces complete. including carriage of material in all leads and lifts.
1917.42
-
10
... More
Providing throating, or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.
368.4
-
10
... More
Brick work using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
7.54
-
100
... More
Brick work using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts.
0.45
-
100
... More
Brick work using 2nd class common burnt clay building bricks in superstructure in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
285.3
-
10
... More
Half brick masonry using 2nd class common burnt clay building bricks in in superstructure above plinth level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
2556.44
-
10
... More
Random rubble masonry/polygonal rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) in cement mortar 1:6.(1 cement: 6 sand) in Breast Wall or Retaining Wall including carriage of material in all leads & lifts.
174.06
-
10
... More
Stone filling behind retaining wall including carriage of material in all leads & lifts.
494.6
-
100
... More
Providing and laying cement concrete 1:5:10 ( 1 cement: 5 sand: 10 graded stone aggregate 40 mm nominal size) with 15% plum, the size of plum should be 150 to 300 mm and curing complete, including cost of form work with steel plates and filled with boulders as per HPPWD specification including carriage of material in all leads & lifts.
1583.11
-
100
... More
Providing Weepholes in brick masonry /stone masonry/plain reinfirced concrete abutmnet ,wing wall, return wall with of the structures with slope of 1(v) : 20(H) towards drawings face complete s per drawing and technical Specifications Caluses 614,709,1204.37 ncluding carriage of material in all leads & lifts.
400
-
10
... More
Providing wood work in frames of doors, windows, clerestory windows and other framed wrought, frames and fixed in position:(a) Ist Class Kapoor / Malasyian Sal wood including carriage of material in all leads and lifts.
21.91
-
10
... More
Providing and fixing 12 mm thick prelaminated board both side bep phenol exterior /interior grade MATT finish flush door shutters including stanless steel bright finished butt hinges with necessary screws 40 mm thick frame. Trend Make door skin Model No. TD 247 including carriage of material in all leads and lifts.
348
-
10
... More
Providing & fixing 40mm thick single/double leaf fully glazed window shutters made of 2nd. class deodar wood having styles & top rail & bottom rail 75mm width and chamferred edged beading 20x12mm for glass panes complete including bright finished/black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts.
172.6
-
100
... More
Providing and fixing 40mm thick wire guage shutters using galvanised M.S guage of I.S.guage designation 85 G with wire of dia 0.56mm for doors, windows & clerestory windows including bright finished black enamelled stailess steel iron butt hinges with necessary screws etc I/c chamfered edged beading 20x12.5mm size.complete including carriage of material in all leads .and lifts. (a) 2nd. class deodar wood.
285.48
-
100
... More
Providing and fixing 38x12.mm size machine made beading/moulding of 2nd. Class deodar wood including carriage of material in all leads and lifts. As per Architectural drawing
1020.8
-
10
... More
Providing and fixing M.S. grills of required patterns in wooden/ steel/pressed steel chowkhats of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or screws or by welding complete of any design as per Architectural drawing/ Design of HIMUDA including carriage of material in all leads .and lifts.
16442
-
10
... More
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads .and lifts.
1696
-
10
... More
Supplying and fixing glass panes 4 mm thick with 2nd. Class deodar wood chamfered edge beading size 40x12 mm including carriage of material in all leads .and lifts.
363.92
-
10
... More
Providing and fixing stain less steel sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.
-
-
-
... More
300x16mm
16
-
10
... More
250x16mm
208
-
10
... More
Providing and fixing stain less steel tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.
-
-
-
... More
2000x 10 mm
184
-
10
... More
150 x 10 mm
184
-
10
... More
125x 10 mm
1152
-
100
... More
Providing and fixing stain less steel handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.
-
-
-
... More
100 mm
184
-
100
... More
125 mm
368
-
10
... More
Providing and fixing stainless steel hard drawn hooks and eyes 150 mm including carriage of material in all leads & lifts.
288
-
10
... More
Providing and fixing stainless steel double acting spring hinges bright finished with necessary screws etc. complete including carriage of material in all leads & lifts. 150mm
48
-
10
... More
Providing and fixing 100mm stainless steel door stoppeer with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.
192
-
100
... More
Providing and fixing stainlless steel 100 mm mortice latch and lock and a pair of levers, handles with necessary screws etccc. Complete ncluding carriage of material in all leads & lifts. ( Indian make of approved quality)
16
-
100
... More
2nd. Class Indian teak wood plank 25 mm wooden planking tougued grooved in flooring / skirting fixing to wooden base frame with iron screws complete including carriage of material in all leads & lifts. ( base wooden frame to be paid for seperately)
227.2
-
10
... More
Providing & laying of Interlocking Concrete Block Paver having thickness 60mm , M-50 Grade as per Drawing and Technical specifications Clause -1504 i/c carriage of material in all leads & lifts confirming to BIS SPecifications .
842.08
-
10
... More
Providing & Laying Cement concrete flooring 1:2:4 ( 1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage ofd material in all leads and lifts. 50 mm thick
20.15
-
10
... More
Providing and laying Duro stone vetrified tiles in any colour / size of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of cutting tiles where ever required including carriage of material in all leads .and lifts Approved Make of Nitco/ Kajaria /Johnson &johnson /Somany sample to be approved from Engineer -In -Incharge .
958.78
-
100
... More
Providing and laying Duro stone vetrified tiles double charged inany colour / size of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including including cost of cutting tiles where ever required including carriage of material in all leads and lifts. Approved Make of Nitco/Kajaria / Johnson & johnson sample to be approved from Engineer -In -Incharge sample to be approved from Engineer -In -Incharge .
143.82
-
100
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty double charged vetrified tiles in any colour / size of approved shade in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including including cost of cutting tiles where ever required including carriage of material in all leads .and lifts Kajaria/Somany/Ortient make of approved quality. sample to be approved from the Engineer -In -Incharge
542.66
-
10
... More
Providing & fixing Digital double charged Colour / size glazed tiles 6 mm thick any size in skirting riser of steps and dado with base12 mm thick cement mortar 1:3 ( 1 cement: 3 sand) and jointed with white cement slurry .The shade and sample to be approved by Engineer-in-charge including including cost of cutting tiles where ever required including carriage of material in all leads and lifts. Kajaria/Somany/Ortient Johnson & Johnson make of approved quality.
727.4
-
10
... More
Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of material in all leads & lifts. (a) 25 mm thick
108
-
10
... More
Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars upto all heights laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material in all leads & lifts..
21.6
-
100
... More
Providing & laying granite stone (close grained rounded at edge)in flooring 20mm (average) thickness base of cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing & polishing complete 20mm thick including carriage of material in all leads & lifts.
54.72
-
100
... More
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating + back of polyster of 5 microns over, 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer - in - charge i/c carriage of material in all leads & lifts. : approved brand of Tata Make confirming to BIS Specifications .
720.94
-
10
... More
Providing & fixing ridges or hips 60cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating (+) back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads and lifts. Tata Make confirming to BIS Specifications .
85.6
-
10
... More
Providing & fixing Valley 60cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 micron over 5 micron primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I. limpet & bitumen washer complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads & lifts.Tata Make confirming to BIS Specifications .
73.2
-
10
... More
Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.ncluding carriage of material in all leads & lifts.Tata Make confirming to BIS Specifications .
50.4
-
100
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2.0mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)including carriage of material in all leads and lifts.
99.42
-
10
... More
Providing & fixing 15 cms wide 45 Cms. overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washer etc. including making necessary connections with rain water pipes complete as per design including carriage of material in all leads & lifts. (a) 0.63mm thick sheet.
145.6
-
10
... More
Providing and fixing on wall face PVC (D-Plast /Finolex/Supreme make) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of material in all leads and lifts.:- 150 mm dia
378
-
10
... More
Providing and fixing on wall faces PVC (D-Plast /Finolex/Supreme make) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts.
-
-
-
... More
PVC Plain bend 150mm dia
48
-
100
... More
PVC Plain shoe 150mm dia
24
-
100
... More
Providing and fixing MS holder bat clamps of approved design design to C.I. or S.C.I. Pipe embedded in and including cement concrete blocks 10cmx10cmx10cm of 1 :2 :4 mix(1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall and completer including carriage of material in all leads and lifts For 150mm diameter for C.I.pipe.
408
-
10
... More
Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts: -Tata Make
-
-
-
... More
In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size).
65.17
-
10
... More
(a) In beams joists channels ,angles ,In tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
180.23
-
10
... More
Providing & fixing stainless steel railing in staicase incuding fixing in position complete as per approved design by ite Engineer-in-Charge i/c carriage of material in all leads and lifts.
216.16
-
100
... More
Providing & fixing stainless steel 3" dia vertical post in staircase i/c carriage of material in all leads and lifts. ncluding carriage of material in all leads & lifts.
196
-
100
... More
Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctions and corners,all necessary fittings complete including applying a priming coat of red lead paint. Using M.S angles 40mm x 40mm x 6mm or diaganal braces. i/c carriage of material in all leads and lifts.
3.12
-
10
... More
Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete. including carriage of material in all leads and lifts
4
-
10
... More
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts.(a) Enamel paint other than white or white paint of : approved Make of Asian/Nerolac/Berger
1178.42
-
10
... More
Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler.
1612.16
-
100
... More
Applying Jk / Birla / white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.
4827.14
-
100
... More
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts. Approved Make of Asian.
551.46
-
10
... More
6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.
1891.38
-
10
... More
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.
3411.75
-
10
... More
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) including carriage of material in all leads and lifts.
8.72
-
10
... More
10 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) including carriage of material in all leads and lifts.
30.8
-
10
... More
20 mm cement plaster in single coat on rough side of brick / stone masonry for interior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
3411.75
-
100
... More
Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer ofapproved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts. Approved Brand/Make of Asian / Nerolac / Berger
-
-
-
... More
(i) On Wall.
4827.14
-
100
... More
(ii) On Ceiling.
1891.38
-
10
... More
Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement :3sand :6 graded stone aggregate 20 mm nominal size) including finishing the top surface of concrete smooth complete including carriage of material in all leads and lifts.
132.62
-
10
... More
Providing under layer for plinth protection of 75 mm thick ( unconsolidated) bed of dry bricks/stone aggregate 40 mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.
132.62
-
10
... More
Brick edging (Brick laid on edge) to plinth protection with bricks including grounting with cement mortar (1 Cement : 4 Sand) including carriage of material in all leads and lifts.. With bricks size 22.9cmx11.2cmx7cm.
147.36
-
100
... More
Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15x22 cm in cement mortar 1:6(1 cement:6 sand) and in side plastering with cement mortar 1:3(1cement : 3sand) including earth work and laying 10 cm.cement concrete in 1:5:10(1 cement :5sand:10 graded stone aggregate 40 mm.nominal size) and 7.5 cm cement concrete 1:2:4(1 cement :2 sand:4 graded stone aggregate 20mm. nominal size ) and finished with a floating coat of neat cement complete as per standard design. including carriage of material in all leads and lifts
108.5
-
100
... More
Providing and fixing 40 mm nominal bore galvanised M.S. tube ( light grade) outlet in cement mortar 1:3 ( 1 cement: 3 sand) including carriage of material in all leads and lifts.
9.6
-
10
... More
10 mm thick plaster of Paris (gyspem anhidrous on ceiling upto any height above floor finished with smooth with plaster of paris. ncluding carriage of material in all leads and lifts.
945.69
-
10
... More
10 mm thick POP cornice 10x10 cm to corner as drawings and design of HIMUDA Architect complete in all respect, upto any height above floor level finished smooth with plasdter of paris ncluding carriage of material in all leads and lifts.
754.56
-
10
... More
Providing and Injecting chemical emulsion for pre-constructional anti termite treatment and creating a contineous chemical barrier under and alround the column pits, wall trenches.junction of wall and floor,along the external perimetre of the building,expansion joints,surroundings of pipes and conduits etc.and all wooden items. complete(Plinth area of the building at ground floor only shall be measured) for payment with chlorpyriphos 50% EC for pre-construction and anti termite in buildings . The chemical is to be used as (1 part of chlorpyriphos 50% EC with 49 parts of water).The work will be carried out to the satisfaction of Engineer-in-charge of the site as per the following stages including carriage of material in all leads and lifts.Stage-I :- The bottom of the foundation pit and sides upto 30 cm height by using the chemical emulsion @ 5 Ltr. Per sqm.Stage-II :- the backfill earth in immediate contact with the masonry walls inside the foundations shall be treated with the chemical emulsion @ 7.5 Ltr. Per sqm. of the vertical surface of the sub-structure for each side. The sprying shall be done after the ramming operation by rodding the earth at 15 cm. Closed to the walls surface. The treatment will have to be done in 2 or more stages depending upon the depth.Stage-III :- The top surface of the consolidated earth within the plinth walls under the floor. The chemical emulsion @ 5 Ltr. Per sqm. of the surface shall be sprayed before sand bed or sub grade is laid.At the junction of the walls and the floor holes shall be made 15 cm.apart by a crow bar and chemical poured into the holes.Stage- IV :- Along the external perimeter of the buildings a small trench shall be dug along the walls and chemical emulsion @ 2.5 Ltr per sqm. shall be sprayed . At points where pipes or condutes enter the building in the soil shall be treated thoroughly. ncluding carriage of material in all leads & lifts.
561.24
-
100
... More
Providing and layingn APP ( Atatic polypropylene poltmer( modified prefabricated five layer, 23 mm thick water proofing memberance, black finished reinforced with glass fiber matt manufactured by bitumat co. ltd. Soprima, general membranes or tamko consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litres/ sqm. by rthe same membrance manufactured of density at 25o C, 0.87-0.89 kg./ltr and vicocity 70-160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc. and preparing the surface complete, the vital physical and chemicals parametres of the membrane shall be as under j strength in longitudinal and transverse direction AT 30o C as 350/300 N/5 cm tear strength in longitudinal and trandverse direction as 60/80N. softening point of membrane not less than 150o C. cold flexibity shall be got done through the authorised applicator of the manufacture of membrane (a) 3 mm thick (DSR-2002 item no.-25.20) inclu carriage of material in all leads and lifts.
196.74
-
10
... More
Extra cost for providing and mixing polyester traingular synthetic bibers in specified ration for polymer 6-18 mm length designed for melting point 240-260 degree centigrade and having specific gravity of 1.33-140 as per ID-456 Amendment August 2007 & IRC 44-2008@ 125 grams/ 50 kg. of cement bag in all types of CC, RCC, plastering work & flooring work etc. including carriage of material in all leads & lifts.
33.17
-
10
... More
Providing and fixing polytheline- Aluminium polyethylene ( PE-AL-PL) composit pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 hot and cold water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fitting(internal work) pipes exposed on wall.i ncluding carriage of material in all leads & lifts.
-
-
-
... More
1216 ( 16 mm O.D. pipe)
491.2
-
10
... More
1620 ( 20 mm O.D. pipe)
192
-
100
... More
1216 ( 16 mm O.D. pipe)
16
-
100
... More
Providing and fixing composite end seal compression fittings such as per IS-15450-2004 for cold water supply i.e. tees, elobows. Reducers, connectors, couples and clamps with jointing testing and fittings complete including cutting and making good the walls etc.ncluding carriage of material in all leads & lifts.
-
-
-
... More
Equal tees:- 1216
50
-
100
... More
Equal tees:- 1620
20
-
10
... More
Equal tees:- 2025
2
-
10
... More
Reducing tees:- 1216 x all branches
16
-
10
... More
Reducing tees:- 1620 x all branches
8
-
100
... More
Reducing tees:- 2025 x all branches
2
-
100
... More
Female elobows:-1216 x 15 mm thread
16
-
10
... More
Female elobows:- 1620 x 15 mm thread
8
-
10
... More
Female elobows:- 1620 x 20 mm thread
2
-
10
... More
Female elobows:- 2025x 25 mm thread
2
-
100
... More
Male thread connector:- 1216 x 15 mm thread
16
-
10
... More
Male thread connector:- 1620 x 15 mm thread
8
-
10
... More
Male thread connector:- 1620 x 20 mm thread
2
-
10
... More
Male thread connector:-2025x 25 mm thread
2
-
10
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).
16
-
10
... More
Fixing vitreous China wash down water closet one piece closets ( ( Europenn type W.C. pan( with integral :P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement: 1 sand) seat & cover to be measured & paid for seprately confirming to BIS specification including carriage of material in all leads & lifts. (a) Ordinary Closet (L. R .)
32
-
10
... More
Fixing wall huge vitreous china wash basin with single/double hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts. (a) Flat back 550x400mm.confirming to BIS Specifications Ist quality (L. R .)
32
-
100
... More
Fixing C.P. brass Bottle trap for wash basin or sink including carriage of material in all leads & lifts 40 mm(Labour Rate)
32
-
100
... More
Fixing C.P. brass waste pipe for wash basin or sink including carriage of material in all leads & lifts. (Labour Rate)
-
-
-
... More
32 mm dia
32
-
100
... More
40 mm dia
16
-
10
... More
Providing and fixing 600mmx900 mm of bevelled edge mirror of approved brand of Modiguard / Saint Gobain on stenless steel studs as directed by the Engineer - in - charge incliding carriage of material in all leads & lifts.
32
-
10
... More
Fixing C.P. brass Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P.brass screws.including carriage of material in all leads & lifts (i) 600mm X 20mm size. (Labour Rate)
32
-
10
... More
Fixing 600x120mm Glass Shelf with C.P.Brass bracket and guard rail complete with , fixed to wooden plugs with C.p Brass screws including carriage of material in all leads and lifts.confirming to BIS specifications. (Labour Rate)
32
-
100
... More
Fixing toilet paper holder .including carriage of material in all leds and lifts.(Labour Rate)
32
-
100
... More
Fixing C.P brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws including carriage of material in all leads and lifts. (Labour Rate)
48
-
10
... More
Fixing C.P brass shower rosewith 15 or 20mm inlet 150mm dia including carriage of material in all leads and lifts Labour Rate)
32
-
10
... More
Fixing wall mixing fauct fior shower & bath with overhead pipe Including carriage of material in all leads and lifts. (a) 15 mm dia ( Labour Rate)
32
-
10
... More
Fixing C.P. Brass bib tap with capstan head including carriage of material in all leads and lifts. 15mm dia ( Labour Rate) short body/Long body
112
-
100
... More
Fixing C.P. Brass pillar tap with capstan head including carriage of material in all leads and lifts. 15mm dia ( Labour Rate)
32
-
10
... More
Fixing C.P. brass angle valve with wheel including carriage of material in all leads and lifts. 15mm dia ( Labour Rate)
144
-
10
... More
Fixing Mixture for kitchen sink with casted swinging spout at top Including carriage of material in all leads and lifts. (a) 15 mm dia ( Labour Rate)
16
-
10
... More
Providing and fixing PVC connection with brass unions pipe including carriage of materials in all leads and lifts (a) 15mm dia 30/40 cm length
96
-
10
... More
Providing and fixing brass fullway valve with wheel including carriage of materials in all leads and lifts (a) 15mm dia 30/40 cm length
-
-
-
... More
15 mm nominal bore
16
-
100
... More
20 mm nominal bore
16
-
10
... More
Providing and fixing G.I./M.I. Union of following sizes ( where not included in the items including carriage of material in all leads & lifts.
-
-
-
... More
15 mm nominal bore
148
-
10
... More
20 mm nominal bore
64
-
10
... More
Providing and fixing Polythene water storage tank for storage of water upto all heights keeping water hygenic & safe for drinking etc. moulded to seamless perfection from FDA approved grades of polythene (LDPE/ HDDE /CLDPE) to BIS-12701-1989 with 40 mm no,minal bore galvanised steel scour tube with fittings 25mm nominal bore galvanised mild steel overflow tubes with fittings and mosquito proof coupling of approved municipal design,15 mm nominal bore ball valve and mosquito proof galvanised coupling including provising pads of sizes as required and complete tubes as per directions of Engineer-in-Charge including carriage of material in all leads and lifts (a)1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.
16
-
100
... More
Fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.(i) 610mmx510 mm with bowl depth 200 mm ( Labour rate )
16
-
100
... More
Providing and fixing PTMT Jet spray of approved quality & colour with 1.00 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.
32
-
10
... More
Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.approved make of Finolex / Supreme Make
-
-
-
... More
90 mm dia
349
-
10
... More
110 mm dia
204
-
10
... More
Providing and fixing high pressure PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.door Including carriage of material in all leads and lifts approved make of Finolex / Supreme Make
-
-
-
... More
90 mm dia
48
-
100
... More
110 mm dia
32
-
10
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete approved make of Finolex / Supreme Make .
-
-
-
... More
90 mm dia
120
-
10
... More
110 mm dia
80
-
10
... More
Providing and fixing high pressure PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.door including carriage of material in all leads and lifts approved make of Finolex / Supreme Make
-
-
-
... More
90 mm dia
50
-
10
... More
110 mm dia
48
-
10
... More
Providing and fixing high pressure PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts approved make of Finolex / Supreme Make
-
-
-
... More
90 mm dia
12
-
10
... More
110 mm dia
40
-
10
... More
Providing and fixing PVC collar ISI marked of approved design with steel screws and rawl plugs etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
90 mm dia
50
-
100
... More
110 mm dia
48
-
10
... More
Providing and fixing PVC cowl ISI marked of approved design with steel screws and rawl plugs etc. complete including carriage of material in all leads and lifts approved make of Finolex / Supreme Make
-
-
-
... More
90 mm dia
12
-
10
... More
110 mm dia
8
-
10
... More
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. Including carriage of material in all leads and lifts. (i) 110mmx75mm approved make of Finolex / Supreme Make
-
-
-
... More
110 x 75mm
12
-
10
... More
75 mm
80
-
10
... More
Constructing chamber 300mm X 300mmX500mm inside sizes for water meter or stop cock with C.I. Surface box 100mmX 100mm X75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mixe (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )75mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1cement:3 sand finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 115 mm thick walls brick masonry in cement mortar 1:5(1cement:5 sand)
16
-
100
... More
Constructing chamber 600mm X 600mmX750 mm inside sizes for sluice valve / brass full way valve th C.I. Surface box 100mmX 1160mm X180 mm deep (inside) with chained lid RCC top slab 1:2:4 mixe (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )100 mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1cement:3 sand finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 230 mm thick walls brick masonry in cement mortar 1:5(1cement:5 sand)
5
-
100
... More
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) Holes upto and including 400 Sq.cm in area
1840
-
10
... More
Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I pipes and filling the same with cement concrete 1:3:6 (1cement: 3sand: 6 graded stone aggregate 20mm and dowen gauge ) after the conduit / G.I pipe is laid.(excluding the cost of pipe).
336
-
10
... More
Providing and laying in trenches HDPE pipe confirming to IS: 4984/1973 ( earth work in trenches to be measured and paid for seperately) including carriage of material in all leads and lifts. confirming to BIS Specifications
-
-
-
... More
40 mm nominal
78
-
10
... More
50 mm nominal
90
-
10
... More
75 mm nominal
120
-
10
... More
Providing anf fixing M.S. flanged for HDPE pipe with all necessary fitting such as nuts sockets and washers etc. com0plete including carriage of material in all leads and lifts.confirming to BIS Specifications
-
-
-
... More
40 mm nominal
13
-
10
... More
50 mm nominal
15
-
10
... More
75 mm nominal
20
-
10
... More
Providing anf fixing M.S. flanged for HDPE bends 1.25 degree of following diametres including carriage of material in all leads and lifts.confirming to BIS Specifications
-
-
-
... More
40 mm nominal
6
-
10
... More
50 mm nominal
4
-
10
... More
75 mm nominal
3
-
10
... More
Providing anf fixing HDPE tees of following diametres including carriage of material in all leads and lifts.confirming to BIS Specifications
-
-
-
... More
40 mm nominal
2
-
10
... More
50 mm nominal
1
-
10
... More
75 mm nominal
1
-
10
... More
Providing anf fixing sluice valve of following diametres including carriage of material in all leads and lifts.confirming to BIS Specifications of approved brand of Kirloskar/ leader make
-
-
-
... More
40 mm nominal
2
-
10
... More
50 mm nominal
2
-
10
... More
75 mm nominal
1
-
10
... More
Providing anfd fixing spindle fire hydrent including carriage of material in all leads and lifts. 65 mm dia.including carriage of material in all leads & lifts. Leader / Kirloskar Make
1
-
10
... More
Providing anfd fixing HDPE pipe reducer including carriage of material in all leads and lifts. 65 mm dia.including carriage of material in all leads & lifts. Confirming to BIS Specifications
-
-
-
... More
75mm to 50 mm
1
-
10
... More
50mm to 40 mm
2
-
10
... More
Providing and laying UPVC pipe, with spigot and socket jointed with stiff mixture of cement mortar in in the proportion 1:2 ( 1cement : 2 sand)m including testing of joints etc. complete (6 kgf/cm confirming to IS-4985:2000).including carriage of material in all leads & lifts.
-
-
-
... More
150mm dia upvc pipe
437
-
10
... More
200 mm dia pipe
86
-
10
... More
Providing and fixing door bend of 11.25 to 90 degree for UPVC pipe with all necessary fitting washers etc. complete including carrige of material in all leads and lifts. confirming to IS-4985:2000).
-
-
-
... More
150mm dia upvc pipe
3
-
10
... More
200 mm dia pipe
1
-
10
... More
Providing and laying UPVC plain bend including carrige of material in all leads and lifts. confirming to IS-4985:2000).
-
-
-
... More
150 mm dia plain bend
19
-
10
... More
200 mm dia plain bend
10
-
10
... More
Providing and laying UPVC collar with necessary fittings such as nuts sockets and washers etc. complete including carrige of material in all leads and lifts. confirming to IS-4985:2000).
-
-
-
... More
150 mm dia UPVC co1lar
49
-
10
... More
200 mm dia plain bend
10
-
10
... More
Providing and laying in trenches centrifugly cast (spun) iron spigot and socket spigot pipes class L.A. ( earth work in trenches and jointing of pipes to be measured & paid for seperately)ncluding carriage of material in all leads & lifts.Confirming to BIS Specifications
-
-
-
... More
150 mm nominal size
3.6
-
10
... More
100 mm nominal size
3
-
10
... More
Providing 200 mm wide cast iron rungs with chequred or ribbed non slip surface including fixing in man holes with 200mmx200 mmx100 mm cement condrete 1:3:6 ( 1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) ncluding carriage of material in all leads & lifts.
30
-
10
... More
Providing anf fixing (Confirming to BIS Specification) cast iron cowl including carriage of material in all leads and lifts.
2
-
10
... More
Constructing man hole with RCC top slab in 1 : 2 : 4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size). Foundation concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing:
-
-
-
... More
(i) Inside size 800 x 800mm and 1000 mm deep with steel fibre reinforced concrete manhole cover and frame (heavy duty) 560mm internal dimension total weight of cover and frame to be not less than 182 Kg.(weight of cover 80Kg. and weight of frame 102 kg.i/c carriage of material in all leads & lifts. (a) With 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement:3sand)-
17
-
10
... More
(i) Inside size 800 x 500mm and 1.00m deep with steel fibre reinforced concrete manhole cover and frame (heavy duty) 560mm internal dimension total weight of cover and frame to be not less than 182 Kg.(weight of cover 80Kg. and weight of frame 102 kg.i/c carriage of material in all leads & lifts. (a) With 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3sand) .
5
-
10
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends of common burnt clay building bricks in cement m,ortar 1:5 ( 1 cement: 5 sand) C.I. cover with frame (light duty)355x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg. ( weight of cover 23 kg. and weight of frame 15 kg._ RCC top slab with inside dimensions 500 mmx700 mmx450 mm deep for pipe line with one two inlets.
22
-
10
... More
Supplying and fixing SFRC cover with frame for manholes/ septic tank for frame of tank 500 mm internal diametre ( Madium duty) the weight of cover to be not less than 80 kg. and weight of frame not to be less than 103 kg.Including carriage of material in all leads & lifts.
3
-
10
... More
Providing and fixing 20 mm nominal dia of stainless steel curtain rod with ends and screws including carriage of material in all leads and lifts Confirming to BIS Specifications
532.8
-
10
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements