Housing And Urban Development Authority Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Mar 2025
Closing Soon13 Mar 2025
Tender Amount₹ 26,53,631
Costs
EMD
₹ 53,080Document Cost
₹ 1,770Tender Fee
Refer Documents
Summary
Execution Of Civil Works For Development Of Educational Infrastructure In 152 Schools Under Pm Shri Scheme Sh Construction Of Laboratory Library 2 Nos Toilets Development Of Ground At Gss School Koti Bounch Block Shillai Distt Sirmour Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HIMUD_101177_1Tender No
HIMUDA ND CB ETENDER 2024 6619 28 DT 4.03.2025Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
3.85
7085
27280.14
... More
1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size)
15.58
6593
102725.17
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of material in all leads & lifts.
20.18
661
13348.06
... More
Providing and laying in position design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
10.81
8687
93915.12
... More
Providing and laying in position design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge including carriage of material in all leads & lifts. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto all floor level
27.94
10022
280038.43
... More
Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts.
-
-
-
... More
Foundations, footings, bases of columns,etc. for mass concrete
5.12
254
1305.09
... More
Suspended floors, roofs, landings, balconies and access platform
50.79
618
31436.47
... More
Shelves (Cast in situ)
14.15
618
8758.14
... More
Lintels, beams, plinth beams, girders,bressumers and cantilevers
48.8
491
24004.72
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
63.64
643
40920.52
... More
Stairs, (excluding landings) except spiralstaircases
10.39
572
5951.39
... More
Edges of slabs and breaks in floors and walls
59.19
163
9674.61
... More
Weather shade, Chajjas, corbels etc., including edges
20.3
711
14434.32
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. including carriage of materialin all leads and lifts. Thermo-Mechanically Treated bars of grade Fe-500D or more.
4650
97
454770
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materialin all leads and lifts.
0.25
8900
2225.01
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materialin all leads and lifts.
29.04
10182
295699.8
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material in all leads and lifts.
8.43
1230
10368.9
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) including carriage of material in all leads and lifts.
18.02
74
1335.28
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) including carriage of material in all leads & lifts.
0.38
227
86.49
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material in all leads & lifts. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
3.89
1870
7277.02
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. Complete including carriage of materialin all leads and lifts
-
-
-
... More
250x16mm
2
175
350.7
... More
300x16mm
2
189
379
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete including carriage of materialin all leads and lifts. 200x10mm
8
61
491.6
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete including carriage of material in all leads & lifts. 125 mm
8
35
280
... More
Providing and fixing M.S oxidized hanging type floor door stopper with necessary screws, etc. Complete including carriage of material in all leads & lifts.
4
112
449.2
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.including carriage of material in all leads and lifts. Using M.S. angels 40x40x6 mm for diagonal braces
3.07
4298
13196.09
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including carriage of material in all leads & lifts
70.4
106
7508.16
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads & lifts. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
135.52
139
18884.71
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge including carriage of material in all leads & lifts
-
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile
26.24
1442
37855.14
... More
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile
5.77
1539
8882.92
... More
Providing and laying digital glazed wall tiles of any size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete..including carriage of material in all leads & lifts
15.18
931
14145.48
... More
Providing and laying vitrified floor tiles in any sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads &lifts .
33.41
1308
43730.35
... More
Providing and laying Vitrified tiles in any sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads & lifts.
3.57
1344
4801.11
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick including carriage of material in all leads and lifts
34.45
1519
52334.72
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts
8.06
1700
13708.05
... More
Providing and fixing M.S. holder bat clamps of approved design to PVC / C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc including carriage of material in all leads and lifts. 100 mm diameter
16
256
4108
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. complete including carriage of material in all leads & lifts 110 mm diameter
26.4
297
7846.08
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c carriage of material in all leads and lifts Bend 87.5° 110 mm bend
4
138
552.2
... More
15 mm cement plaster on the fair side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.
199.19
288
57516.11
... More
20 mm cement plaster on the rough of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) on rough side wall including carriage of material in all leads & lifts.
162.51
346
56293.46
... More
6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.
69.03
227
15735.39
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat withcement primer including carriage of material in all leads and lifts. On Wall
277.15
133
37082.67
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material in all leads and lifts. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
16.97
115
1959.19
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.including carriage of material in all leads and lifts.
218.64
146
32129.15
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. including carriage of material in all leads and lifts.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
112.64
1021
115112.45
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
5321
5321.3
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. W.C. pan with ISI marked white solid plastic seat and lid
1
5150
5150.55
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material in all leads and lifts White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
1
2812
2812.25
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material in all leads and lifts.
1
316
316.4
... More
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm including carriage of material in all leads and lifts.
1
3671
3671.65
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including carriage of material in all leads and lifts. Flexible pipe 32 mm dia
2
107
215
... More
Providing and fixing C.P. Brass 32mm size bottle trap of approved quality & make and as per the direction of Engineer-in-charge including carriage of material in all leads and lifts.
1
938
938.95
... More
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts.
3
156
469.5
... More
Providing and fixing 600X450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. i/c carriage of material in all leads & lifts.
1
1226
1226.2
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material in leads and lifts.
1
796
796.8
... More
Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed with Plastic Gitti, drilling hole, C.P. brass screws etc complete in all respects including carriage of material in all leads and lifts.600mmx20 mm
1
933
933.85
... More
Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.
-
-
-
... More
90mm nominal size.
7.4
293
2171.53
... More
110mm nominal size.
19.4
330
6417.52
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts. 110mm
8
258
2067.2
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including carriage of material in all leads and lifts. 90mm nominal size.
2
303
606
... More
Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts. 110mm nominal size.
3
150
452.4
... More
P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts. 110mm nominal size.
2
248
497.9
... More
Providing and fixing (ISI marked) PVC cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts. 110mm nominal size.
2
196
392.6
... More
Providing and fixing (ISI marked) PVC floor trap of self cleaning design i/c fixing with approved adhensive with C.P. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all leads and lifts.110x90 mm
3
1100
3302.1
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of material in all leads &lifts. Internal work - Exposed on wall 15 mm dia nominal bore
36.25
275
9985.06
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. including carriage of material in all leads and lifts. 25 to 40 mm nominal bore
1
628
628.5
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete i/c carriage of material in all leads and lifts 15 mm nominal bore
4
360
1440.6
... More
Providing and fixing G.I./M.I Union of following sizes (Where not included in the items.Including carriage of material in all leads and lifts. 15mm nominal bore
2
221
443
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts 1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.
1000
7
7600
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.including carriage of material in all leads & lifts 15 mm nominal bore
3
651
1953.9
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material in all leads and lifts. 15mm nominal bore
5
601
3006.25
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. including carriage of material in all leads and lifts. 15 mm nominal bore with 30cm length
5
100
504.5
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts. Inside size 90x80 cm and 45 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
13579
27158.2
... More
Providing and fixing factory made uPVC window frame and shutters made of uPVC extruded sections profile colour white Mesh system NCL Veka-160 sliding series type (3) SS 304 Mesh, handle Type & colur White with panel insertion of 5 mm toughened glass including all fixtures/fittings as required excluding grill including labour for fixing, loading/ unloading of material and carriage of material from manufacturer to site of work complete in all respects as per manufacturer's specification and direction of Engineer-in-charge.
61.34
9348
573443.12
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%