Housing And Urban Development Authority Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Mar 2025
Closing Date15 Mar 2025
Tender Amount₹ 21,23,542
Costs
EMD
₹ 42,475Document Cost
₹ 1,770Tender Fee
Refer Documents
Summary
Construction For The Development Of The Educational Infrastructrue At Various School In Himachal Pradesh Under Pm Shri 2024 25 Sh Construction Of Laboratory Room 9 Nos Toilets And Development Of Ground For Govt Senior Secondary School Banjar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HIMUD_101513_1Bid Award Id
ViewTender No
HIMUDA-MD-E-207-2024Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts.
68.55
5800
397644.84
... More
Reinforced cement concrete work in columns, beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). including carriage of material in all leads and lifts.
17.15
8694
149110.68
... More
Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of material in all leads and lifts.
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
85.09
609
51845.34
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
37.82
485
18376.74
... More
Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
120.08
555
66728.46
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
172.46
255
44063.53
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material in all leads and lifts.
1715
101
174072.5
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts
2.8
8342
23358.72
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts
26.1
8752
228435.03
... More
Half brick masonry with comman burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts
32.4
1111
36012.6
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.
20.19
6056
122276.7
... More
Stone soling properly handpacked filling interstices with spalls and consolidating with hand ramming to the required level including spreading watering and ramming complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) including carriage of material in all leads and lifts.
7.84
1127
8841.17
... More
Providing weepholes in brick masonry/stone masonry/plain reincorced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawings facae complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.
20
260
5208
... More
Stone filling behind retaining walls including carriage of material in all leads and lifts.
10.53
927
9767.63
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material in all leads and lifts.
6.3
2724
17163.09
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
67.5
143
9672.75
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings i.e sliding door bolt, tower bolt, handle etc. complete, including applying a priming coat of approved steel primer. including carriage of material in all leads and lifts. (a) Using M.S. angels 40x40x6 mm for diagonal braces
14.18
4096
58092.62
... More
Providing & fixing 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete including carriage of material in all leads and lifts.
1.8
947
1706.04
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. including carriage of material in all leads and lifts. (a) Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
1.22
795
969.9
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. including carriage of material in all leads and lifts. (a) Fixed to steel windows by welding.
32.4
174
5640.84
... More
Providing and fixing aluminium powder coated sliding door bolt, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts(a) 300x16mm
2
304
609.8
... More
Providing and fixing aluminium powder coated tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete including carriage of material in all leads and lifts. (a) 200x10mm
4
180
721.2
... More
Providing and fixing aluminium powder coated handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (a) 125mm
8
96
768.8
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of material in all leads and lifts. (a) Single rubber stopper.
4
32
128.8
... More
Providing and laying vitrified floor tiles as per sample approved by the Engineer-in- charge (thickness not less than 10mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts.
46.21
1411
65206.93
... More
Providing and laying Vitrified tiles as per sample approved by the Engineer-in- charge (thickness not less than 8 mm)with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. including carriage of material in all leads and lifts.
3.78
1442
5453.41
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size/colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.
16.2
1512
24508.98
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in any colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads & lifts.
58.32
1372
80038.37
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts
89.03
211
18794.23
... More
CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts
135.82
277
37690.05
... More
CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts
154.32
331
51187.94
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts.
224.85
126
28443.53
... More
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of material in all leads and lifts.
154.32
128
19845.55
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts.
224.85
103
23316.95
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications (a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.
41.07
110
4517.7
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.
12.6
114
1445.22
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including putty and fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including carriage of material in all leads and lifts.
50.48
115
5845.58
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts.
13.72
601
8247.09
... More
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material all lead as per direction of Engineer-in-charge (a) In cement mortar
12.85
1826
23475.67
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material all lead as per direction of Engineer - in- charge.
3.87
2247
8697.05
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material all lead as per direction of Engineer-in-charge. (a) In cement mortar
21.24
1304
27713.95
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
9
5819
52372.8
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. internal work - exposed on wall including carriage of material in all leads and lifts. (a) 15 mm dia nominal bore.
56
282
15792
... More
Providing and fixing G.I./M.I. Union of 15mm size (where not included in the item) (confirming to BIS Specifications) including carriage of material in all leads & lifts. (ESS-ESS/CZAR/NOVA)
9
206
1856.7
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 including carriage of material in all leads and lifts.
9
1134
10208.7
... More
Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material in all leads and lifts.
9
721
6490.8
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. (a) 110 mm dia.
43.9
410
18016.56
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. (a) 110 mm dia
13
213
2774.2
... More
Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts. (a) 110 mm dia
7
270
1892.1
... More
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:-1000 litres net capacity tank
3
10761
32285.1
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material in all leads and lifts.
2
23315
46631.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements