Housing And Urban Development Authority Tender

Providing and installation of MMX CO2 4.5 KG IS:15683 Squeeze Grip valve (Fire Rating 55B) of Cease fire/ Minimax/ Usha make as required and approved by the Engineer -in-charge.

Providing and fixing cast iron / steel butterfly valve confirming to type PN 1.6 of IS 13095-1991 complete with flanges, bolt, gasket etc. As per table "E " specification complete in all respect hydraulically test to 20 k/sqcm. make Padmini, FEG, Atasee as required and approved by the Engineer -in-charge. 150 mm dia.

Providing and fixing cast iron / steel double flanged horizontal type with gunmetal seat non Dual plate reflux valve confirming to class-I, ISI including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E " and specification complete in all respect make Zoloto, Sant, LP as required and approved by the Engineer -in-charge. 150 mm dia.

Supplying installation testing and commissioning of elecric driven main fire pump DB 80/26 (86) suitable for automatic operation and consisting of following complete in all respect as required. Horzontal type centrifugal spilt casingpump of cast iron body and bronzeimpeller with stainless steel shaft mechnical seal and farthest outlet at specified flow of 2280 LPM and 56 Metres head conforming to IS 1520 (The pump should be capable of delivering 150% rated discharge at a head not less than 65% oftherated head) Suitable 37 KW/50 HP SQ cage induction motor TEFC synchronous speed 2900 RPM suitable for operation on 415 volts 3 phase 50 Hz AC with IP 55 protection for enclosure horizontal foot mounted type with class "F" insulation conforming to IS-325 MS fabricated common base plate coupling guard foundation bolts etc. as required (D) suitable RCC pump foundation as per manufactures design and 4 Nos Dunlop (cushy foot) heavy duty Antivibration mounting pads suitable RCC pump - Foundation as per manufactures desin and 4 Nos Dunplop (cushy foot) heavy Antivibration mounting padsas as approved by the Engineer -in-charge. Make Kirloskar, Crompton, Jindal.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size and approved by the Engineer-in-charge. Armoured cable 70 sq. mm (3.5 core)

Supplying installation testing and commissioning of 100 mm dia type pressure gauge gate valve with all accessories as required and approved by the Engineer-in- charge. Make Mass, Garu, System senser.

SITC Pressure switch for Main Jockey and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve complete in all respect and approved by the Engineer-in- charge.