Housing And Urban Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority - HIMUDA Tender
Civil Works Buildings
Eprocure
Opening Date11 Jun 2020
Closing Date25 Jun 2020
Tender Amount₹ 8,78,23,310
Costs
EMD
₹ 5,00,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_HIMUD_38020_1Bid Award Id
ViewTender No
NO HIMUDA DD CB 345 70 DT 23 05 2020Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://http://himuda.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Dharamshala Smart City Ltd at Dharamshala District Kangra HP SH Construction of Building of integrated command and Control Centre including internal WS and SI Steel Fabricated framed Building using Expanded Polystyrene Core panel Non Load Bearing System E
BOQ Items
... More
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.
-
-
-
... More
Foundation, footing bases of columns etc. and mass concrete.
99.86
-
-
... More
Column, pillars, posts and struts upto all heights.(i) Square,rectangular or polygonal in plan.
157.5
-
-
... More
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.
339.6
-
-
... More
Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.
55.6
-
-
... More
Providing and laying cement concrete having strength of M-25 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.
-
-
-
... More
Foundations, footings, bases of column and the like and mass concrete.
151.56
-
-
... More
Walls (any thickness but not less than 0.10metre thickness) including attached pilasters buttresses , plinth and string courses etc. from top of foundation upto all floor level.
50.94
-
-
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
284.55
-
-
... More
Column, pillars, posts and struts upto floor two level.
29.53
-
-
... More
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
61989.6
-
-
... More
Providing and laying 200 mm thick (50+100+50mm) ± 5 mm. Expanded Polystyrene (EPS) Core panels for external walls using 100 mm thick Expended Polystyrene (EPS) core reinforced on both side using welded mesh made of 3mm hard drawn steel wire and covered on both side with 50 mm thick cast-in-situ cement concrete 1:1.5:3 (1 cement: 1.5 sand :3 graded stone aggregate 6mm nominal size) and finished neat in superstructure above plinth level up to floor five level. The Expanded Polystyrene (EPS) type-SE cores having a minimum Dentsity of 15 Kg /m3. 6 mm diameter steel (Vertical) bars to be fixed in a Zig-Zag pattern at a distance of 600 mm C/C on each side of the panel (140mm apart). The dowel bars should be fixed 600mm above plinth / roof and 300 mm below plinth / roof at alternate row by welding . The fixing of EPS panel with columns / beams and strengthning of corners and opening with 6mm or 8mm steel bars, wire mesh patches with U-shape wire mesh for opening including encasing of all columns & beams with welded wire mesh 3mm duly shortcreted complete in all respect as per direction of the Engineer-in-Charge.(The rate is inclusive of all materials, labours,T&P and scaffolding involved) in all leads & lifts.
1099.03
-
-
... More
Providing and laying 130 mm thick (40+50+40mm) ± 5 mm. Expanded Polystyrene (EPS) Core panels for external walls using 100 mm thick Expended Polystyrene (EPS) core reinforced on both side using welded mesh made of 3mm hard drawn steel wire and covered on both side with 50 mm thick cast-in-situ cement concrete 1:1.5:3 (1 cement: 1.5 sand :3 graded stone aggregate 6mm nominal size) and finished neat in superstructure above plinth level up to floor five level. The Expanded Polystyrene (EPS) type-SE cores having a minimum Dentsity of 15 Kg /m3. 6 mm diameter steel (Vertical) bars to be fixed in a Zig-Zag pattern at a distance of 600 mm C/C on each side of the panel (140mm apart). The dowel bars should be fixed 600mm above plinth / roof and 300 mm below plinth / roof at alternate row by welding . The fixing of EPS panel with columns / beams and strengthning of corners and opening with 6mm or 8mm steel bars, wire mesh patches with U-shape wire mesh for opening including encasing of all columns & beams with welded wire mesh 3mm duly shortcreted complete in all respect as per direction of the Engineer-in-Charge.(The rate is inclusive of all materials, labours,T&P and scaffolding involved) in all leads & lifts.
1539.85
-
-
... More
Providing and fixing 100 mm thick double layer glass for partition wall including carriage of material in all leads & lifts.
101.09
-
-
... More
Providing and fixing single/double leaf 12 mm thick frame less toughened glass for door shutter and tempered frosted glass for swing door of approved brand and manufacture, including providing and fixing top & bottom pivot and spring type fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge including carriage of material in all leads & lifts.
143.24
-
-
... More
Providing and fixing fire resistant door frame of section 50x60 mm horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter including cost of S.S. ball bearing.The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . including carriage of material in all leads and lifts.
613.3
-
-
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame,consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc. including cost of panelling all complete as per direction of Engineer-in-charge including carriage of material in all leads and lifts.
225.84
-
-
... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete including carriage of material in all leads and lifts.
5
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable including carriage of material in all leads and lifts.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
77.19
-
-
... More
Providing and fixing stainless steel sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts. 250x16mm
97
-
-
... More
Providing and fixing stainless steel tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.
-
-
-
... More
250x 10 mm
97
-
-
... More
150 x 10 mm
97
-
-
... More
Providing and fixing 125 mm stainless steel handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.
174
-
-
... More
Providing and fixing 100mm stainless steel floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.
87
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge including carriage of material in all leads and lifts. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
11546.14
-
-
... More
Providing and fixing of High Pressure Laminate Sheet for external cladding as per technical specification and drawings complete in all respect (Rates are inclusive of all material, labour, fixtures & fittings, tools and tackles required for completing the work) including carriage of material in all leads and lifts.
2222.72
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including carriage of material in all leads and lifts.
1698.3
-
-
... More
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for
Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
... More
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified
laboratories
-
-
-
... More
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330- 10 testing method for a range upto 50 mm
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test Tests to be conducted on site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
-
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of above item) including carriage of material in all leads and lifts.
1698.3
-
-
... More
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per
the site requirement.
-
-
-
... More
Providing and fixing 12.5 mm thick Gypsum board for ceiling including cost of frame work with galvanised steel stripes including carriage of material in all leads & lifts.
1731.54
-
-
... More
Providing and fixing 0.8mm thick Galvanized iron metal deck sheet with GI wiremesh of size 100 x 100mm size and 3 mm thickness inculding edge trim, wherever required, supported on Structural Steel beams and Columns which will serve as permanent shuttering to the roof slab of total thickness of 75mm & shall have adequate strength of support weight of cement concrete and imposed loads during concreting as per manufacturer's recommendations complete as per the details given in the drawings and as directed by Engineer-in-charge including carriage of material in all leads and lifts. (Excluding cost of concrete) Fused shear studs to be provided as per requirement and direction Engineer- in- Charge).
3794.05
-
-
... More
Providing and laying vetrified tiles any size / colour/shade/design approved by Engineer-in-charge in flooring,/skirting, treads and riser of steps and landings laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.
1590.63
-
-
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size / colour/shade/design approved by Engineer-in-charge in flooring,/skirting, treads and riser of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.
719.03
-
-
... More
Providing & fixing digital tiles 8mm thick of any size and any colour as per where required in skirting, risers of steps and dado on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry including carriage of material in all leads and lifts.
1167.07
-
-
... More
Providing and laying 60 mm thick heavy duty precast cement conrete inter locking paver blocks vibro compacted of M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) including carriage of material in all leads and lifts.
1148.23
-
-
... More
Providing & laying granite stone (close grained rounded at edge) in flooring,skirting riser of steps & dado 20mm (average) thickness base of cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing & polishing complete 20mm thick including carriage of material in all leads & lifts.
14.6
-
-
... More
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating + back of polyster of 5 microns over, 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads and lifts.
732.04
-
-
... More
Providing & fixing ridges or hips 60cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating (+) back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads and lifts.
69.76
-
-
... More
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all leads & lifts.
14
-
-
... More
Providing & fixing 15 cms wide 45 Cms. overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washer etc. including making necessary connections with rain water pipes complete as per design including carriage of material in all leads & lifts. (a) 0.63mm thick sheet.
88.04
-
-
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material in all leads and lifts.
139.69
-
-
... More
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete i/c carriage of material in all leads and lifts.(a)150mm dia pipes
84
-
-
... More
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts
-
-
-
... More
PVC Plain Bend 150 mm diameter
12
-
-
... More
PVC.plain shoe 150mm diameter.
8
-
-
... More
Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts: -(a)In beams joists channels ,angles ,In tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
287.26
-
-
... More
Steel work bolted in built up sections,including cutting ,hoisting ,fixing in position and In single stanchions composed of rolled steel joists orchannels,with caps,bases splices,angles,brackets caps,bases splices,angles,brackets applying a priming coat of red lead including carriage of material in all leads and lifts.The structure steel shall be galvanised as per conformation to IS 4759 or relevent indian standard.
3414.64
-
-
... More
Providing and fixing Automatic sensor door with all material and necessary fittings for entrance door Entrance door including carriage of material in all leads and lifts.
4.32
-
-
... More
Providing and fixing stainless steel railing mark-36 pipe sizetop-2' pipe, post pipe 1" and 3' hight in staircase including necessary fittings and positions complete as per design approved by the Engineer-In-Charge including carriage of materials in all leads and lifts.
70
-
-
... More
Providing and applying two coats of fire retardant paint including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant including carriage of material in all leads and lifts.
587.18
-
-
... More
Wall painting two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams / litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including carriage of material in all leads and lifts.
5277.76
-
-
... More
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.
5277.76
-
-
... More
Providing water proofing and filling for Toilet / Balcony / Utility in two parts as per the specifications listed below and as approved by the engineer-in-charge with a guarantee of 10 years : The first part consisting of providing and applying Acrylic Polymer Modified Flexible Cementitious Coating [approved systems : as per the list of approved makes in 2 or 3 coats as per manufacturers’ specification and as approved by the engineer-in-charge to the sunk slab and walls up to minimum 1 M height, complete. The treatment to include cleaning and wire-brushing the concrete surface, treating all the cracks (wider than hairline), construction joints and honeycombs by grouting with specialised non-shrink cementitious compound, grouting the annular space between the pipe and concrete / masonry, providing and applying a protective 15 mm thick, CM 1 : 4 plaster admixed with integral waterproofing compound, curing, at all levels and heights, etc., complete
3141.11
-
-
... More
Painting on two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth in surface including cleaning and surface of all dirt, dust and other foreign matters including carriage of material in all leads and lifts.(i) Enamel paint other then white / Enamel white paint.
174.19
-
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
1148.23
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles including carriage of material in all leads and lifts.
1238.06
-
-
... More
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.
5277.76
-
-
... More
Wooden flooring (Solid) tiles of premium Grade-"A" quality with minimum colour variation 15 x 150 mm width High Grade finish of matt lacqured gloss, resistent to stains , scraches and hard- wearing with all necessary frames and finished in all respect including carriage of material in all leads and lifts.
140.91
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts:
5
-
-
... More
Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including carriage of material in all leads and lifts.Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line.
1
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete including carriage of material in all leads and lifts.
38
-
-
... More
Providing & Fixing white glazed vitreous china wash basin with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets including carriage of material in all leads and lifts. Under Counter wash basin
43
-
-
... More
Providing and fixing one hole wash basin mixing Faucet Including carriage of material in all leads and lifts. .
43
-
-
... More
Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers incliding carriage of material in all leads & lifts.
38
-
-
... More
Providing, fixing & testing and commissioning of white viterous china large half stall urinal including providing & fixing CI / MS bracket (duly painted with 2 coats of paints over a coat of primer), including 32mm dia CP brass waste with dome type grating complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets including carriage of material in all leads and lifts.
20
-
-
... More
Providing, fixing, testing and commissioning of automatic flushing systems for urinal to ensure pre-flush & flushing only immediately after use, comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning. Including necessary wall cutting / chasing and making good, as required including carriage of material in all leads and lifts.
20
-
-
... More
Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material in all leads and lifts
10
-
-
... More
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts.i) 610 x 510 mm with bowl depth 200 mm.
6
-
-
... More
Providing and fixing Mixer for kitchen sink with casted swinging spout at top including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe including carriage of material in all leads and lifts.
141
-
-
... More
Providing and fixing PTMT Jet spray of approved quality & colour with 1.50 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.
38
-
-
... More
Providing and fixing towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material in all leads and lifts.600mmx20 mm
38
-
-
... More
Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lifts. Glass container
43
-
-
... More
Providing and fixing C.P. Brass toilet paper holder including carriage of material in all leads and lifts.
38
-
-
... More
Providing and fixing 32mm dia C.P. Bottle Trap for wash basin and sink including carriage of material in all leads and lifts.
49
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge including carriage of material in all leads and lifts.Internal work - Exposed on wall
-
-
-
... More
20 mm nominal outer dia Pipes
28.8
-
-
... More
25 mm nominal outer dia Pipes
79.2
-
-
... More
32 mm nominal outer dia Pipes
79.2
-
-
... More
40 mm nominal outer dia Pipes
182.6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge including carriage of material in all leads and lifts.External work (a) 62.50 mm nominal inner dia Pipes
150
-
-
... More
Providing and fixing 25 mm dia gunmetal single acting air release valve with screwed inlet including carriage of material in all leads and lifts.
6
-
-
... More
Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg including carriage of material in all leads and lifts.(i)Round Mouth Traps: 150mmx150mm size S type
15
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for Circular tank including carriage of material in all leads and lifts.(i) 1000 Ltrs.
14
-
-
... More
Providing and fixing PP white Trap with 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections.110 mm inlet & 110 mm outlet.(P or S trap) including carriage of material in all leads and lifts.
116
-
-
... More
Providing, fixing, testing and commissioning of pipe inlet fittings fabricated with PP(Poly proplene) Pipe with maximum 3 inlets 40, 50 & 75 mm OD size PP pipe, fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/rubber ring joint complete including carriage of material in all leads and lifts.
116
-
-
... More
Providing and fixing sound insulated Poly proplene (PP) piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 21-23 dBA at a flow rate of 4 l/s and having pipe ring stiffness as per 1SO/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, with all necessary fittings fitted with factory fitted lip ring including carriage of material in all leads and lifts. ( For Indirect waste/ Wash Basin/Urinal/Sink/Floor Drain)
-
-
-
... More
40mm outer dia
95
-
-
... More
63mm outer dia
6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge including carriage of material in all leads and lifts.Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
569.4
-
-
... More
20 mm nominal outer dia Pipes
625
-
-
... More
25 mm nominal outer dia Pipes
625
-
-
... More
32 mm nominal outer dia Pipes
375
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material in all leads and lifts.
-
-
-
... More
50 mm nominal bore
8
-
-
... More
65 mm nominal bore
3
-
-
... More
80 mm nominal bore
1
-
-
... More
Providing and fixing G.I. pipes (Heavy Duty, IS:1239) complete with G.I. fittings and clamps, including cutting and making good the walls etc. (for inside toilet & exposed pipes) including painting with bitumastic paint in concealed pipes and enamel paint in exposed pipes complete as per specifications including carriage of material in all leads and lifts. (a)80 mm dia. nominal bore
150
-
-
... More
Providing and fixing piston / diaphragm operated type PRV in DZR (De Zincification resistant) brass housing having Fibre-reinforced NBR diaphragm and NBR seals, capable of handling inlet pressures to a maximum of 16 bars and outlet pressure: 1.5 to 6 bar adjustable. The PRV shall have factory fitted green adjustable knob for pressure adjustments including carriage of material in all leads and lifts.
-
-
-
... More
32mm dia nominal bore
10
-
-
... More
40mm dia nominal bore
8
-
-
... More
Providing and fixing sound insulated poly proplene piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 21-23 dBA at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, with all necessary fittings in blue colour, fitted with factory fitted lip ring including carriage of material in all leads and lifts.
-
-
-
... More
110 mm outer dia
316
-
-
... More
160 mm outer dia
210
-
-
... More
Providing and fixing floor drain (FD) with 50mm outlet and 100 mm inlet with SS grating having 19mm seal for indirect floor drain (FD) (Mc Alpine mrfg 4 (for horizontal outlet/mrfg4v (for vertical outlet) including carriage of material in all leads and lifts.
78
-
-
... More
Providing and fixing PVC Plain bend ISI marked including fixing with approved adhesive etc complete including carriage of material in all leads and lifts.
-
-
-
... More
110 mm outer dia
28
-
-
... More
150 mm outer dia
12
-
-
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
-
-
-
... More
110 mm outer dia
28
-
-
... More
150 mm outer dia
12
-
-
... More
Providing and fixing PVC single equal branch ISI marked including fixing with approved adhesive etc complete including carriage of material in all leads and lifts.
-
-
-
... More
110 mm outer dia
88
-
-
... More
150 mm outer dia
48
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements