Himachal Pradesh University Tender

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. (a.) Cement Mortar 1:4(1Cement: 4Sand).

Providing and fixing suspended false ceiling Megastar, classic make PVC decorative ceiling panel of required shade size 3.00 m x 0.30mx 7.00mm to 9.00mm thick made of light weight, high intensity, heat installed flame, corrode and age resistant with no aspiration, non impentrable by in section termides reristant to weather and special chemicals, water proof and washable and artistic scinch which including farncia with required size GI parimeter channdels laid horizontal, longitudinally and vertically at required size necessary screws fixed to brick/stone, R.C.C/ partition was with the help of walls plugs / fasteners at suitable distance than cancging /fixing the PVC ceiling panels with butt/ toungned and grooved jointing with necessary screws with drilling machine including providing fixing suitable pillar/ binders/corners/U,L, jointers of 25 mm X 25 mm X 3.02mm as per site condition and requirement to fillup the corners wall ceiling and for making brarine etc.included

2mm thick pvc/rubber tiles flooring plain, coloured, corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treatment (to be measured separately for payment.)

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with :- a) Ready mixed primer

Applying Birla White wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smoothpriming coat with distemper primer.

Distempering (one coat) with oil bound washable distemper of approved brand and manufacture and of required shade ,on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease dirt loose pieces of scales and also including preparing the surface even and sand papered smooth.

Extra for every subsequent coat of distempering with oil bound washable distemper of approved brand and manufacture.

Painting two coats (excluding priming coat) on new steel and other metal surfaces With enamel paint brushing in to give an even shade including cleaning the surface of all dirt, dust and other foreign matters:- a) Enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt , dust and other foriegn matter. a) With Enamel paint other than white.

Extra for every subsequent coat of paint on previously painted steel a) With Enamel paint other than white

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other than white

Extra for every subsequent coat of paint on previously painted wood a) With Enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted concrete/masonry/plastered surface with ready mixed paint/brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with a) Paint other than white.

Supplying and fixing glass panes with putty and nails including removal of brocken galss panes wherever necessary: a) Plain glass 4mm thick.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. a) 150 mm dia.

b) 90 mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete. a) 150mm dia.

b) 90 mm dia.

Providing and fixing PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive complete. a) 150mm dia.

b) 90 mm dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete. a) 150 mm dia.

b) 90 mm dia.

Providing and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. a) 150 mm dia.

b) 75 mm dia.

Constructing manhole with R.C.C top slab in 1:2:4 mix in (1cement :2 sand :4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size ) inside plastering15 mm thick with cement mortar 1:3(1 cement :3 sand ) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing :)     i   Inside size 800 mm x 800 mm and 500 mm deep including C.I cover with frame (light duty single seal pattern-1) 455 mm x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg).a) With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement :3 sand ).

With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement :3 sand ).