Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation - HPTDC Tender
Civil And Construction
Building Construction
Coronavirus COVID 19
Eprocure
Opening Date1 Jul 2019
Closing Date22 Jul 2019
Tender Amount₹ 4,18,08,200
Costs
EMD
₹ 4,20,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HPTDB_29796_1Bid Award Id
ViewTender No
UDAAN RCS -II/ITender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://http://hptdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil.
14027.81
-
-
Disposal of surplus excavted earth / boulders by machanical / manual means up to all lead and lifts. The dumping site will be arranged and paid by the contractor himself.
-
-
-
Excavated Rock
10559.77
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc complete as per the direction of engineer incharge.
2293.55
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
43.32
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
7.26
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
509.21
-
-
Diluting and injecting chemical emulsion for PRE CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under floors and apron using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the Plinth level With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
639.45
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in all kind of soil upto all levels / depth/ lift, in foundation trenches or drains and dressing of sides and ramming of bottoms, de-watering, getting out and stacking of excavated earth to the site as specified by the engineer incharge.
18
-
-
CONCRETE WORK
Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering, in foundation and plinth, including carriage of the materials in all lead and lift.
188.04
-
-
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, but including the cost of carriage of materials.
2.74
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of the materials in all lead and lift.
170.87
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size), complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
48.66
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification, work in doses by weight of cement as per manufacturer's specification, complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
12.85
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in
kerosene oil, including carriage of the materials in all lead and lift.
48.66
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
32.13
-
-
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
84.81
-
-
Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used of as per directions of Engineer-in-Charge.
1911
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All works in foundation including carriage of the materials in all lead and lift.
CC 1:2:4 (1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size)
8
-
-
R.C.C. WORK
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge, including carriage of the materials in all lead and lift.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)
-
-
-
Upto Plinth level
403.95
-
-
Above plinth level upto al floor level
51.19
-
-
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, including carriage of the materials in all lead and lift.
-
-
-
Thermo-Mechanically Treated bars
45144.88
-
-
Extra for providing richer mixes at all floor levels.
-
-
-
Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum)
48.29
-
-
FORM WORK :- Providing Centering and shuttering including strutting, propping etc. and removal of the same including carriage of the materials in all lead and lift.
-
-
-
Foundation, footing, bases of columns etc. for mass concrete
849.1
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
667.69
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
591.88
-
-
Shelves
3.26
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
12.94
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
965.68
-
-
Suspended floors, roofs, landings, balconies and access platform
52.23
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
59.18
-
-
BRICK WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up all floor level in all shapes and sizes, including carriage of the materials in all lead and lift.
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
72.06
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level, including carriage of the materials in all lead and lift.
-
-
-
Cement mortar 1:4 (1 cement :4 coarse sand)
145.5
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
145.5
-
-
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1cement : 6 coarse sand) :
-
-
-
With F.P.S.(non modular) bricks
174.43
-
-
Marble Work: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.including carriage of the materials in all lead and lift.
Granite of any colour and shade
-
-
-
Area of slab upto 0.50 sqm
2.71
-
-
Area of slab over 0.50 sum.
3.16
-
-
Providing edge moulding to 18 mm thick marble and in granite works stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc., carriage of the materials in all lead and lift.complete, as per drawing, design and direction of Engineer-in-Charge.
-
-
-
Granite work
7.7
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc and carriage of the materials in all lead and lift.
8.39
-
-
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete, as per drawing, design and direction of Engineer-in-Charge.
5
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over
20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
-
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
167.35
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
749.25
-
-
Providing & fixing weep holes in Stone masonry retaining walls with 75mm dia uPVC pipe (working pressure 4kg per sq. cm), extending through the full width of the structures with slope 1V:20H towards drawing force complete as per drawings
75
-
-
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 450 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind Retaining walls to the full height compacted to a firm condition complete as per drawing and Technical Specification.
60.75
-
-
Woodwork: Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clelestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters of 40 mm thickness
-
-
-
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
,Grade I,Type II,IS:12823 marked
13
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: including ISI marked Stainless Steel butt hinges with necessary screws etc complete including carriage of the materials in all lead and lift.
-
-
-
35 mm thick
4.89
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
300x16 mm
17
-
-
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
300x10 mm
25
-
-
Providing and fixing aluminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete,including carriage of the materials in all lead and lift.
-
-
-
125 mm
30
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete,including carriage of the materials in all lead and lift.:
-
-
-
Twin rubber stopper
13
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge, including carriage of the materials in all lead and lift.
8
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,including cost of adhesive of approved quality including carriage of the materials in all lead and lift.
-
-
-
1.5 mm thick
9.78
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured).:
4.89
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete, including carriage of the materials in all lead and lift.
12
-
-
Steel Work: Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Tata or equivalent make)
55261.78
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge, including carriage of the materials in all lead and lift.
-
-
-
10 x 60 mm
48
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge, including carriage of the materials in all lead and lift.
-
-
-
10 x 120 mm
60
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - Part 1 and M.S. top cover of required thickness for rolling shutters, including carriage of the materials in all lead and lift.
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover including carriage of the materials in all lead and lift.
8.1
-
-
Providing and fixing ball bearing for rolling shutters, including carriage of the materials in all lead and lift.
2
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, including carriage of the materials in all lead and lift. (area of grill to be measured).
8.1
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), including carriage of the materials in all lead and lift.
10
-
-
Structural Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete -including carriage of the materials in all lead and lift.
-
-
-
Angle Iron 40x40x6
906.68
-
-
Steel work welded in built up sections / framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of the materials in all lead and lift.
-
-
-
In Gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
2510
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of the materials in all lead and lift.
2141.3
-
-
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. Complete.including carriage of the materials in all lead and lift.
221
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge, including carriage of the materials in all lead and lift.
Made of G.I. wire of dia 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.
31.5
-
-
FLOORING
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size, color and shape, except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete , including carriage of the materials in all lead and lift. Nitco, Kajaria, Somany make. (basic rate not less than Rs 50/- per Sqft)
212.9
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
Nitco, Kajaria, Somany make. (basic rate not less than Rs 65/- per Sqft)
-
-
-
Size of Tile 600x600 mm
254
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm , having 6-8mm thickness of 1st quality conforming to IS : 15622, of approved sample, size shade/color such as white, evory, grey, fume red, brown laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, including carriage of the materials in all lead and lift.
Nitco, Kajaria, Somany make. (basic rate not less than Rs 50/- per Sqft)
32.17
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing etc complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand), including carriage of the materials in all lead and lift.
-
-
-
25 mm thick
23.74
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing etc complete, complete, including carriage of the materials in all lead and lift.
2.71
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
121.22
-
-
Cement plaster in skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement, including carriage of the materials in all lead and lift.
18mm thick
13.76
-
-
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix
: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
15.6
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved size, colour/ shade such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment, complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
20
-
-
ROOFING: Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. including carriage of the materials in all lead and lift.
-
-
-
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
278
-
-
Providing and fixing Colour Coated Galvalume Trapezoidal Profiled sheeting of 0.50mm Thickness tolerance +/-5% Total Coated Thickness TCT of material, 550 Mpa for roofing/ cladding application. The Trapezoidal Profiled Sheet shall be 28-32 mm in Crest height with 2 Stiffener Ribs with Subtle Square Fluting in the six pans at Nominal 200 mm centre- to-centre. The end crest shall be designed for anti - capillary action , to avoid any seepage of water through the lateral overlap. The profile shall have return leg for proper side lap.
Coating Specification: Primer Coat: 5-7 microns epoxy primer on both side of sheet. Top Coat: Polyester Top coat 15 -18 microns. Color: as approved by Engineer-in- charge Tolerances: As per IS standards: IS: 15961, IS: 513, IS: 14264.
The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, including carriage of the materials in all lead and lift.
843.69
-
-
Same as above but for Ridges plain (500 - 600mm)
129.32
-
-
Same as above but for Gutter .(600 mm over all girth)
183.92
-
-
Water Proofing: Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in- Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
-
-
-
Using rough kota stone
103.02
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge , including carriage of the materials in all lead and lift.
-
-
-
Using rough kota stone
125.15
-
-
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete including carriage of the materials in all lead and lift. Dumb bell with central bulb (180 mm wide, 8 mm thick)
100.6
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of the materials in all lead and lift.
2.46
-
-
Suppliying and Fixing of Padler Flanges of 100mm Dia as per Approved Design as directed by Engineer-in-charge ,including carriage of the materials in all lead and lift.
4
-
-
FINISHING :- 6 mm cement plaster to ceiling in cement mortar1:3 (1 cement : 3 fine sand) including carriage of the materials in all lead and lift.
15.6
-
-
12mm Cement plaster finished with a floating coat of neat cement. 1:3 (1 cement: 3 coarse sand) including carriage of the materials in all lead and lift.
308.4
-
-
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand) in single coat on floor two level / height, including carriage of the materials in all lead and lift.
1480.24
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of the materials in all lead and lift.
1024.8
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). including carriage of the materials in all lead and lift.
104
-
-
20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) including carriage of the materials in all lead and lift.
165.58
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface upto all levels / heights having VOC content less than 50 grams/litre, including carriage of the materials in all lead and lift.
130
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete upto all heights, including carriage of the materials in all lead and lift.
On steel work
1243.47
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
295.58
-
-
Applying two coats of Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour upto all levels / heights including cost and carriage of painting in all lead and lift.
130
-
-
Finishing walls with two coats of the textured exterior paint of approved shade for new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, inliding cost of primer, paints and scaffolding etc upto all levels / height, including carriage of the materials in all lead and lift.
269.37
-
-
Distempering two coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, including carriage of the materials in all lead and lift.
341.04
-
-
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) including carriage of the materials in all lead and lift.
2147.81
-
-
Painting with synthetic enamel paint of approved brand and manufacture in all shades to give an even shade - two or more coats. including carriage of the materials in all lead and lift.
49.52
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. including carriage of the materials in all lead and lift.
9
-
-
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coat
28.98
-
-
ALUMINIUM WORKS :Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For Fixed Portion
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of the materials in all lead lift & height.
647.62
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of the materials in all lead lift and height.
243.38
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc complete as per specifications, drawings and direction of Engineer-in-charge including carriage of the materials in all lead lift & height..
22.7
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
With brass cover plate minimum 1.25 mm thickness including carriage of the materials in all lead lift & height.
10
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, including carriage of the materials.
224
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge, including carriage of the materials.
-
-
-
Anodized (AC 15 ) aluminium tubular handle bar
26
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete, including carriage of the materials.
5
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge including carriage of the materials. (Door handle, lock and stopper etc.to be paid separately).
24
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings, specifications and the directions of Engineer-in-charge . including carriage of the materials. (Cost of aluminium snap beading shall be paid in basic item),
-
-
-
With float glass panes of 8 mm thickness
70
-
-
Providing and fixing 12 mm thick prelaminated particle board of standerd / approved make, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings, design and specifications and directions of Engineer-in-charge including carriage of the materials in all lead and lift.
-
-
-
Pre-laminated particle board with decorative lamination on both sides
3.15
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge including carriage of the materials.
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
2
-
-
Structural Glazing: Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge including carriage of the materials in all lead and lift.(The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
1375
-
-
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, roviding suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and unctional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and rotection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance haracteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.
-
-
-
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories ccreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable eparately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
-
-
-
Performance Laboratory Test for Air Leakage Test (- 50pa to – 300pa) & (+50pa to +300pa) as per ASTM E- 283-04 testing method for a range of testing limit 1 to 200 mVhr” Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing method for a range up to 2000 ml.” Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml” Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330-10 testing method for a range upto 50 mm” Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml
137.46
-
-
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ but including the carriage of the materials in all lead and lift.
-
-
-
Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
137.46
-
-
Road Work: Supplying and Stacking of good earth at Site.
1651.22
-
-
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including carriage of the materials in all lead and lift
115
-
-
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with echanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift
17.25
-
-
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in- charge, i/c cost of paint and cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out completeas per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift
61.25
-
-
Granular Sub-Base with Coarse Graded Material (Table:- 400-1 & 400-2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface to required gradient, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve at least 98% of maximum dry density (determined using Modified Proctor Test), to achieve at least 30% of CBR Value, complete as per Clause 401 of MORTH 5th Revision as per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift.
For Grading -(iii)
268
-
-
Dry Lean Cement Concrete Sub-base:- Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, aggregate gradation after blending to be as per Table 600-1 of MORTH 5th Revision, with minimum cement content of 150 kg/cum or as per mix design (whichever is more), Concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-12 tonnes vibratory roller, finishing and curing. Complete as per direction of Engineer-in- charge including carriage of the materials in all lead and lift.
153.13
-
-
Pavement Quality Concrete:- Construction of reinforced, M-40 Grade pavement quality concrete of flexural strength 45 Kg/cm2 over a prepared sub-base with 43 grade cement, with minimum cement content of 390 kg per cum or as per mix design (whichever is more), coarse and fine aggregate conforming to IS:383 with 20 mm nominal size of aggregate, mixing in a batching and mixing plant as per approved mix design (As per IRC-44), transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction , longitudinal & tranverse joints, Joint Cutting, joint filler, backer rod conforming to ASTMC:5249-95 or ASTMD:3575, separation membrane (400 micron HDPE Sheet), sealent primer, polyurethene joint sealant with min MAF±30 ,reinforcement (Thermo- Mechanically Treated bars of grade Fe-500D or more),admixtures as approved, curing compound, finishing to lines and grades as per drawing and direction of Engineer-in- charge including carriage of the materials in all lead and lift.
Note:-
1) Details of HDPE Sheet:- 400 micron HDPE Sheet over tack coat of 2.5Kg/10mtr2 of VGRO HDPE with minimum width of 8m without joints, 400 micron manufactureres by multilayer technology using 100% virgin raw material,conforming to IS 10889:2004(or latest) with company logo & IS Code & batch number on at least very 2 metres.
2) Manufacturer Test certificate for every consignment.
145
-
-
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) as per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift.
427
-
-
Sanitory installations: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :casino series, cera make, including carriage of the materials in all lead and lift.
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid.
5
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :casino series, cera make, including carriage of the materials in all lead and lift.
-
-
-
White Vitreous China Wash basin size 530x425 mm with a pair of 15 mm C.P. brass pillar taps.
6
-
-
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Diamond make, including carriage of the materials in all lead and lift.
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 200 mm
1
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x
390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge , cera make, including carriage of the materials in all lead and lift.
3
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, Jaguar or equivalent make, including carriage of the materials in all lead and lift.
-
-
-
15 mm nominal bore( RO WATER)
5
-
-
Providing and fixing C.P. brass angle valve for basin mixer and points of approved quality conforming to IS:8931 a) 15 mm nominal bore , Jaguar or equivalent make, including carriage of the materials in all lead and lift.
-
-
-
15 mm nominal bore, Jaguar or equivalent make, including carriage of the materials in all lead and lift.
20
-
-
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
5
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with as per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift.
C.P. brass screws and washers complete.
6
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. as per specifications and directions of Engineer-in- Charge including carriage of the materials in all lead and lift.
5
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms, Jaguar or equivalent make, including carriage of the materials in all lead and lift.
5
-
-
Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and wall hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat. No.ALD-CHR-583 or equivalent make as approved by Engineer-in-Charge, including carriage of the materials in all lead and lift.)
5
-
-
Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends complete.(Make: Jaquar Cat.No.ALD 803B or equivalent make as approved by Engineer-in Charge, including carriage of the materials in all lead and lift.) for health faucet
15
-
-
Providing and fixing soap dish fixed in position by rawl plugs and CP brass screws.(Make- Jaquar Cat.No. ACN-1131N or equivalent make as approved by Engineer-in-Charge, including carriage of the materials in all lead and lift.)
1
-
-
Providing and fixing of sink mixer with swivel spout including cutting and making good the wall complete. (Make-Jaquar Cat. No. 23321B or equivalent make as approved by Engineer-in- Charge including carriage of the materials in all lead and lift.)
1
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design as approved by Engineer-in- Charge including carriage of the materials in all lead and lift.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
WATER SUPPLY INTERNAL : Providing and fixing polyethylene-Aluminium- Polyethylene (PE-ALPE) composite pressure pipe IS confirming 15450-UV atablized with corbon black having thermal stability for hot&cold water supply, capable to with stand temperature upto 80*c including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducer, coupler & connectors etc.with clamps at 1 metre spacing. This includes the cost of cutting chases and including testing of joints compelete as per the direction of engineer in charge, including carriage of the materials in all lead and lift.
Expose wall work. including cutting chases and making good the wall etc.complete , including carriage of the materials in all lead and lift.
-
-
-
32 mm nominal outer dia Pipes
10
-
-
40 mm nominal outer dia Pipes
5
-
-
Providing and fixing polyethylene-Aluminium- Polyethylene (PE-ALPE) composite pressure pipe IS confirming 15450-UV atablized with corbon black having thermal stability for hot&cold water supply, capable to with stand temperature upto 80*c including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducer, coupler & connectors etc.with clamps at 1 metre spacing. This includes the cost of cutting chases and including testing of joints compelete as per the direction of engineer in charge.
Concealed work. including cutting chases and making good the wall etc.complete , including carriage of the materials in all lead and lift.
-
-
-
20 mm nominal outer dia Pipes
30
-
-
25 mm nominal outer dia Pipes
15
-
-
32 mm nominal outer dia Pipes
15
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge, including carriage of the materials in all lead and lift.
-
-
-
2025 (25 mm OD ) pipe
50
-
-
2532 (32 mm OD ) pipe
40
-
-
3240 (40 mm OD ) pipe
65
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :including carriage of the materials in all lead and lift.
-
-
-
25 mm nominal bore
2
-
-
20 mm nominal bore
5
-
-
32 mm nominal bore
4
-
-
40 mm nominal bore
2
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of the materials in all lead and lift.
-
-
-
25 mm dia
1
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.complete including carriage of the materials in all lead and lift.
-
-
-
25 mm dia nominal bore
25
-
-
40 mm dia nominal bore
5
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of the materials in all lead and lift.
20 mm nominal bore
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings etc.complete including carriage of the materials in all lead and lift.
Circular tank
2000
-
-
SOIL, WASTE, VENT & RAIN WATER PIPES: Providing and fixing in position uPVC SWR floor trap conforming to IS:13592 including providing necessary steel support and as per Specification. Making proper connection cutting chase / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position complete as required. The hopper and trap shall be set in cement concrete mix 1:2:4 complete as required. (P/S trap) Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge, including carriage of the materials in all lead and lift.. (110X110mm)
12
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge including carriage of the materials in all lead and lift.
160 mm outer dia
50
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge.
110 mm outer dia
90
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil
& waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Supreme, Ashirvad & Prince
75 mm outer dia
45
-
-
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works, including carriage of the materials in all lead and lift.
127mm (Cat No.-SKSH5,Hilti & chili)
12
-
-
Providing, laying & jointing in position uPVC pipe conforming to IS:4985:1988 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, clamps, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instructions and making good the wall and floor as reuired.Make: Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
PVC pipe 110mm-6 kg/cm2
20
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering
12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :including carriage of the materials in all lead and lift.
6
-
-
Extra for depth of manholes: Size 90 x 80 cm, With Sewer bricks conforming to IS : 4885
0.45
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.including carriage of the materials in all lead and lift.
4
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :including carriage of the materials in all lead and lift.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
Fire Fighting Works: Supplying and Fixing First Aid Hose Reel, wall mounting swinging type complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments, complete with the following as required.
36 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2 as per IS : 12585 25 mm dia ball valve & nozzle. Pressure guage Drum and brackets for fixing the equipments on wall. Connection from riser with stop valve (gun metal) & M.S. Pipe complete as per direction of the engineer in charge, including carriage of the materials in all lead and lift.
1
-
-
Providing and fixing M.S. cabinet fabricated from 16 g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised platform as required (Approx.0.6 m x 0.6 M x 0.45 M ).as approved by engineer-in-charge including carriage of the materials in all lead and lift..
1
-
-
SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel black pipe (IS: 1239 Part-1) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, dead flange,reducers. etc including excavation (upto 1.5M deep). Rubble soling, sand filling upto 3 " above the pipe, back-filling with excavated earth, removal of surplus soil and providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS: 10221complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
Note : Pipes upto and 40 mm dia shall be standard threaded forged steel fittings joints, above 40mm shall be standard M.S. fittings with welded joints.Jindal Hissar/TATA
-
-
-
100mm dia
30
-
-
80mm dia
2
-
-
50mm dia
2
-
-
25mm dia
2
-
-
20mm dia
2
-
-
Providing and fixing cast iron double flanged non return valves of PN1.6 including nuts, bolts, 3mm thick compressed asbestos gasket, Gunmetal seat, Drilling as per IS:1538, matching flanges as per table "E" complete as per IS:5312 swing type.(For Pumps Only)as approved by engineer-in-charge including carriage of the materials in all lead and lift.. Makes:ZOLOTO/NVR/DEEPAK.
100 MM
1
-
-
Providing and fixing C.I. butterfly valves PN 1.6 complete with Nitrile liner, SS disc, SS stem, bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete as per IS:13095. Makes:ZOLOTO/NVR/DEEPAK or equivalent as approved by engineer-in-charge including carriage of the materials in all lead and lift..
100mm dia
2
-
-
Providing and fixing C.I. butterfly valves PN 1.6 complete with Nitrile liner, SS disc, SS stem, bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete as per IS:13095. Makes:ZOLOTO/NVR/DEEPAK or equivalent as approved by engineer-in-charge including carriage of the materials in all lead and lift..
80mm dia
1
-
-
SUPPLY, INSTALLATION, TESTING. & COMMISSIONING OF:
Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
a) Horizontally mounted, centrifugal type single/ multi stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 450 LPM against a total head of 35 M, pressure gauge with GM cocks on the delivery side including bypass arrangement (with 50 valve and upto 5M G.I. Medium pipes) for periodical testing of the working of the testing of the working of the pumping set as per TAC rules.
b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts +_ 15%, 3 phase, 50 HZ A.C. supply 1450 / 2900 RPM of suitable capacity including electric power contol panel with all accessories for auto operation of pump e.g., single phase preventor, rotary switch, ampere meter, volt meter , starter of suitable capacity, pressure switches to start the pump at predetermined pressure, necessary power cable from panel to motor (approx. 10 HP or as required) for the above pump coupled with flexible copuling including earthing as per relevant Indian Standard & specifications.as approved by engineer-in-charge including carriage of the materials in all lead and lift..
c) Common bed plate for mounting Pump and Motor fabricated of Motor fabricated of suitable M.S.Channel as per manufacturer*s recommendations.
d) Suitable RC.C Pump-Foundations as per manufacturer's design and 4 nos. Dunlop (cushy foot) heavy duty Antivibration mounting pads. ( for Sprinkler/Hydrant down comer) with include air vessel, valve, pressure switch, starter, cable etc.
-
-
-
Control Panel for above Pumps
1
-
-
SUPPLY & FIXING OF ISI (IS:15683) marked Portable fire Extinguisher Water type stored pressure (stored pressure) capacity 9 ltrs. with gun-metal cap and nozzle and complete in all respects including initial fill and wall suspension bracket. Capacity 9 ltrs.of standerd and approved make including carriage of the materials in all lead and lift..
3
-
-
SUPPLY & FIXING OF ISI marked (IS:15683) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discnarge hose of not less than 10 mm dia. 1m long & complete in all respects including
initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket of standerd and approved make including carriage of the materials in all lead and lift..
2
-
-
Supply and fixing of ISI marked (IS:13849) Portable fire Extinguisher, Dry Powder ABC Type (6kg weight) of standerd and approved make including carriage of the materials in all lead and lift..
3
-
-
EXTERNAL ELECTRICAL WORKS/CCTV/SECURITY INSTALLATIONS INTERNAL WIRING WIRING FOR CCTV SYSTEM : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.standerd and approved make including carriage of the materials in all lead and lift..
700
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.standerd and approved make including carriage of the materials in all lead and lift..
700
-
-
EARTHING: Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt etc.complete i/c cost and carriage of material.
4
-
-
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc.complete including carriage of the materials in all lead and lift..
100
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable etc.complete including carriage of the materials in all lead and lift..
800
-
-
PLATE EARTHING FOR DG SET & UNITLIZED SUBSTATION
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt etc.complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
6
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt etc.complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
4
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift... (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
50
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
75
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
30
-
-
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
45
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
20
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
30
-
-
LV CABLES:
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
Upto 35 sq. mm
380
-
-
Above 95 sq. Mm and upto 185 Sqmm.
65
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
Upto 35 sq. mm
110
-
-
Above 95 sq. Mm and upto 185 Sqmm.
20
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
210
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)
25
-
-
Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
2C x 10 sq.mm
13
-
-
2C x 16 sq.mm
2
-
-
4 x 10 sq.mm
2
-
-
4C x 25 sq.mm
4
-
-
3.5 x 70 sq.mm
2
-
-
3½ X 120 sq. mm (45mm)
4
-
-
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
100 mm dia
40
-
-
150 mm dia
40
-
-
HT CABLES: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
-
-
-
Upto 120 sq. mm
60
-
-
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade of standerd and approved make including carriage of the materials in all lead and lift.
-
-
-
3Cx120 Sq.mm.
3
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade of standerd and approved make including carriage of the materials in all lead and lift.
-
-
-
3Cx120 Sq.mm.
1
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete of standerd and approved make including carriage of the materials in all lead and lift..:
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
450
-
-
LV CABLES:
Supply testing of under noted sizes of Aluminium conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code of standerd and approved make including carriage of the materials in all lead and lift.
-
-
-
4 x 10 sq.mm Al. Armoured
50
-
-
2C x 10 sq.mm Al. Armoured
200
-
-
2C x 16 sq.mm Al. Armoured
30
-
-
4C x 25 sq.mm Al. Armoured
50
-
-
3.5C x 50 sq.mm Al. Armoured
60
-
-
3.5C x 70 sq.mm Al. Armoured
60
-
-
MV CABLES:
Supplying & Testing of following sizes XLPE, 11 KV earthed armoured cable confirming to relevent IS code of standerd and approved make including carriage of the materials in all lead and lift.
-
-
-
3Cx120 Sq.mm.
60
-
-
CCTV SYSTEM
Supply, Installation, Testing and Commissioning of 4 MP bullet camera , ONVIF profile S & G ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm motorized varifocal lens ,min illumination : 0.05 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s , 90 dB WDR , SD card support
, Alarm trigger - 1 input / 1 output , Video Compression : H.265 ,H.264 , frame rate : 30fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , In built IR LED , IR Distance upto 60 meters , IP 66 , POE of standerd and approved make including carriage of the materials in all lead and lift.
7
-
-
Supply, installation, testing and commissioning of 1Professional DVR with 16 Video Inputs, H.264 Compression - D1 Display Resolution with 2.5TB HDD, Expandable up to 8 TB. Total recording frames @ 400 fps. Recording based on Continuous, Motion, Scheduled or alarm, Remote backup through TCP/IP,HTTP Networkable, backup by USB/DVDWR, Client software included, POS Transaction data
recording with image. Supplied with Licensed OS, keyboard & mouse. complete as required and as per specifications. The DVR shall be integrated with Access control system. (Along with 2 nos. 4 TB.) of standerd and approved make including carriage of the materials in all lead and lift.
1
-
-
EXTERNAL LIGHTINING
HIGH MAST: Supply, Installation, Testing and Commissioning of 16M high mast shaft in two section suitable for 47 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory. Including raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire Included) and with foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template including suitable foundation with provision of cable entryalso with LED type single dome aviation obstruction light etc complete of standerd and approved make including carriage of the materials in all lead and lift.
2
-
-
Supply, Installation, Testing and Commissioning of LED flood light of 200W LED suitable for high Mast Operation complete of standerd and approved make including carriage of the materials in all lead and lift.
16
-
-
Supply, Installation, Testing and Commissioning of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 4X10 sq. mm and out going 2.5 sq. mm terminals etc.complete of standerd and approved make including carriage of the materials in all lead and lift.
2
-
-
Supply, Installation, Testing and Commissioning of 4mtr high hot dip galvanised octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 200X200X12mm thk. (Without Bracket)
8
-
-
Supply, Installation, Testing and Commissioning of 4Nos of M16X450 long 'J' type EN 8 grade foundation bolts along with template
8
-
-
Supply, Installation, Testing and Commissioning of 7mtr high hot dip galvanised octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm thk. HT sheet alongwith base plate of size 200X200X12mm thk. (Without Bracket) etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
7
-
-
Supply, Installation, Testing and Commissioning of 4 Nos of M20X600 long 'J' type EN 8 grade foundation bolts along with template etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
7
-
-
Supply, Installation, Testing and Commissioning of 1mtr long hot dip galvanised Single arm special bracket (Model: Type-5) cross arm made up of GI pipe suitable to mount on pole having top 70mm A/F.
Model: Type 5 etc. complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
8
-
-
Supply, Installation, Testing and Commissioning of LED Street Light of 30 W Light Fixture of standerd and approved make including carriage of the materials in all lead and lift.
8
-
-
Supply, Installation, Testing and Commissioning of 25 W Gate LED Light suitable for Coloumn Mount and suitable for 220Volt opetration complete with wiring etc complete as approved by engineer-in-charge including carriage of the materials in all lead and lift..
2
-
-
SUPPLY & INSTALLATION OF SUBSTATION SAFETY EQUIPMENT:-
SUPPLY OF 160 KVA UNITISED SUB-STATION
Design, manufacture, testing at works, supply of Compact unitized Substation, outdoor plinth mounted type, comprising following components interconnected with one another, including required interconnection with cable/ busbar and internal earthing connections complete as required and as per specifications. 11KV Compact secondary substation outdoor type designed for natural cooling having type tested equipment comprising distribution transformer and SF6 insulated compact switchgear enclosed in robotically sealed laser sealed/welded stainless steel tank,low voltage switchboard,interconnection between HT switchgear and transformer using cables and transformer to LT switchgear using Al busbars/cables,factory built ready for connection type,internal earthing factory completed and other associated equipment etc. complete as required conforming to detailed specifications as per the direction of engineer in charge, including carriage of the materials through mechanical and manual means. The enclosure shall have modular construction using G.I sheets and shall be painted with polyurethane paint from the exterior.The enclosure for HT & LT switchgear shall be provided with IP54 ingress protection.The transformer compartment will have IP23 ingress protection.The transformer used shall be specially designed for low losses and hermatically sealed with corrugated tank.The components of Compact substation shall be as per details below:
-
-
-
H.T. PANEL (11KV) 1 way 11KV,(V+M)3 Phase ,50Hz,3 wire,floor mounted ,non extensible, having hinged arc proof cable doors,breaking capacity 21KA SF6 insulated compact switchgear enclosed in stainless steel tank having IP67 degree of protection consisting of following:- 1 No. 11KV, 630Amps. Tee-off spring assisted type Vacuum circuit breaker unit with self- actuating electronic over current and earth fault relay ,fitted with fixed type voltage indicator device as per IEC 61958 and ring core type protection current transformer along with LV compartment with A ,PF ,Bucholtz Relay,auxiliary realys for WTI (Winding Temperature Indication), 4 window annunciation panel and TVM. Air insulated metering panel connected along with above unit, 20KA, 630A having potential transformer,connected jumpers/busbars ,LV compartment to incorporate voltmeter as per requirement, including providing Voltmeter, Ammeter, Electronic Trivector Meter with MDI, space Heater with Thermostat.
-
-
-
TRANSFORMER (Dry Type) WITH OFF LOAD TAP CHANGER 1No. 11KV/433V, 160 KVA three phase, 50Hz, DYn11, Off load tap changer +5% to -10% in steps of 2.5%, mounted inside compact substation enclosure, hermetically sealed,corrugated wall design transformer with Cu winding and standard fittings. As per IS 2026 As Amended up to date expect losses BUS BARS: Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 400 Amps, 25KA. Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 1.2 sq.mm./amp. LT OUTGOINGS Two Incomer with 433V LT feeder panel having 320A 4P manually operated MCCB, 36KA with microprocessor based O/L, S/C and E/F protection along with phase indication lamps
& protection MCB, space Heater & Thermostat including 1 No. 45 KVAR (1 Nos. 20Kvar, 2 Nos. 10Kvar & 1No. 5Kvar), MPPH Capacitor Bank, with 125A TP MCCB, 25 KA service breaking capacity, for direct operation, along with MFM & Phase Indication lamp.
-
-
-
Unit Substation comprising I, II, III & IV as described above and as per specifications.
1
-
-
SUPPLY OF MAIN LT PANEL:
Design, manufacture, supply,including supervision during installation, testing and commissioning of the following extensible cubicle type indoor mounting, dead front, fully compartmentalised with hinged lockable detachable front & back openable, dust and vermin proof, floor mounting sheet steel clad switchboard fabricated out of 2 mm thick CRCA powder coated sheet steel suitable for use at 415 volts 3 phase 4 wire 50 cycle system and to withstand a symmetrical fault level of 50 KA at 415 volts. Panels shall be fabricated in easily transportable sections, length, height, depth etc. to match with site condition. All incomer breaker shall be interlocked electrically as shown in SLD and specifications as per the direction of engineer in charge, including carriage of the materials through mechanical and manual means. The following provisions shall be required to be made in the Main LT Panel as detailed below: The Switchboards shall have provision to accommodate all cables from the bottom
/top as required. All live accessible parts shall be shrouded with 1mm thick polycarbonate/3 mm thick FRP sheet and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves according to the colour code. SMC shrouds and busbar supports shall be used. All MCCB door handle shall be interlocked and lockable in OFF position. Galvanised hardware with zinc passivation shall be used in fabrication of Switchboards. Suitable Aluminium earth bus to be provided throughout the length of Switchboards.
-
-
-
Suitable Aluminium earth bus to be provided throughout the length of Switchboards. All indication lamps / illuminated push buttons shall be LED type. All incomer meters of Main LT Panel shall be multifunction & should have all the electrical parameters like Ampere, KW, KVAR, KWH, PF, Frequency etc. 2A SP MCBs shall be used as backup protections. All MCCBs shall be variable plug setting type with thermal magnetic up to 200 A rating and with microprocessor based releases above 200 A rating, line load reversibility, Ics = 100% Icu,& rotary handle, if not mentioned with MCCB. All control& power wiring shall be broughtout upto the cable alley in the terminal blocks. All rear door of Main LT Panel shall be almirah type with lockable arrangement. Space heater shall be provided with thermostat with 6A MCB as backup protection in each section of Main LT Panel controlled with feeder 20 A DP MCB 10 KA. An approval shall be taken for each panel before manufacturing. Provision for providing 230V or 24V supply for Dual KWHr metering when any or all DG are in operation One separate compartment of minimum size 400 x 900 mm for power management system of D.C.U.'s with control wiring as per following specification and control wiring scheme: Control wiring shall be looped from each energy meter till DCU's compartment for sending DCU register change command from data connectivity. Provision of one 6/16 amp socket & compartment lighting for each vertical section of main panel.
-
-
-
5 nos extra of each R,Y,B,G,A colour indicating lamp and illuminated push buttons and normal push button shall be provided with main LT panel. MIMIC diagram shall be for Main LT panel. MIMIC shall be made of polycarbonate sheet of 5mm thickness fixed on acylic sheet of 2mm thick.the size of panel shall be such that the diagram can be visualized from 5-6 meter distance. The panel shall display complete single line diagram of Main LT Panel. this line diagram shall be made from luminous non fading materials to glow in dark and each breaker legend shall be provided with bi- colour LED lights to show the ON/OFF status of the respective feeder (Incomers / Bus couplers) All CT shall be cast resin type. Class - 3 CT shall be provided up to 60 amp and above that the CT shall be Class - 1. Illuminated push button on Starter Panels of Pumps. Interlocking / Auto start command terminals for starter Panels. All breaking Capacity for MCCB to be Ics=100%Icu. All MCB to be C Curve Addiional CT's if required for REF of suitable rating burden / class shall be supplied by the Contractor / Panel Manufacturer. Responsibility of installation of KWHr meter, integration with electrical system, billing system and smooth operation of system shall lie with contractor. MAIN LT / DG PANEL BUS SECTION TRANSFORMER INCOMER (160 KVA) :- 1 Nos. 320 Amps, 36KA, 440 volt 4-P Electrically operated (Motorized) MCCB complete with micro processor based tripping mechanism, shunt release (24V DC), earth fault release and inbuilt O/C & SC releases (Microprocessor based) (Required Interlocking with other incomers to be provided as per Interlocking / operation scheme indicated in SLD).
-
-
-
The MCCB shall have suitable arrangement for termination of Cable on incoming side and busbar connection at outgoing side, complete as required. . Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of THD, KVARH KW, KWH, KVAR, PF, V, A, Hz , equivalent to EM6400, with 3 Nos. current transformers of required ratio, 15 VA Class 1.0, 6 nos NO/NC contacts for remote opening & closing. Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 1 set of three phase indicating lamps along with 2A SP MCB backup protection. Spring charge & DC supply healthy, DG set on, ACB ON indicating lamp with 2A SP MCB backup protection. 1 no. current transformer of 320/5A ratio Class 1.0, 15 VA Burden for PF correction relay. Motor wound spring closing mechanism. Suitable arrangement to receive incoming cable of 1 runs of 3.5 x 70 sq. mm "Al." XLPE conductor.. T-N-C Breaker control switch Control MCB, control terminals& wiring as required. Combined Undervoltage & Overvoltage relay 3 phase with time delay setting, Reverse Power relay. One auto/manual selector switch. One set of push buttons for DG start, DG Stop Reset & Emergency Stop. One 16 amp automatic Battery charger with inbuilt facility of trickle / boost & consisting of : DC Ammeter (0-30)V. DC Voltmeter.(0-30)Amp, Charger ON, OFF indications . 1 Nos 6 Window microprocessor based annuciation panel (for each D.G. set) for following indications & Buzzer : 1 Nos 6 Window microprocessor based annuciation panel (for each D.G. set) for following indications & Buzzer : DG set Alarm, DG set Fault, DC supply failure, O/V Fault
-
-
-
BUSCOUPLER 1 Nos. 320 Amps, 36KA, 440 volt 4-P Electrically operated (Motorized) MCCB complete with micro processor based tripping mechanism, shunt release (24V DC), earth fault release and inbuilt O/C & SC releases (Microprocessor based) (Required Interlocking with other incomers to be provided as per Interlocking / operation scheme indicated in SLD). The MCCB shall have suitable arrangement for termination of Cable on incoming side and busbar connection at outgoing side, complete as Required for Buscoupler BUSBAR Electrolytic high conductivity aluminium three phase and neutral busbars rated at 400 amps, 25KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.2 sq.mm / amp. Neutral Bus Bar shall be 50% of Phase Bus Bar. OUTGOINGS 1 nos. 250 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases along with 1 No. 200A on Load Changeover each complete with: 1 nos 250/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection.
-
-
-
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified. 5 nos. 100 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases each complete with: 5 nos. 100/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection. Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified. 1 nos. 125 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases each complete. 1 nos. 80 Amps 16 kA 440 volt FP MCCB with earth fault and short circuit releases each complete. 1 nos. 63 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases each complete. 3 nos. 40 Amps 10 kA 440 volt FP MCB .
-
-
-
MAIN LT / DG PANEL as described above shall be complete with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required.
1
-
-
EXTERNAL LIGHTING PANEL
INCOMER: 1Nos. 80A, 415V, Ics= 16kA, FP MCCB with variable E/F, O/L and S/C releases with set of cast resin C.T.'s of 80A along with 1 set of timer switch with suitable rating of contactor for Automatic Operation.
BUSBARS: Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps, 16KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. OUTGOING: 2 Nos. 32A, FP MCB of 10kA Breaking Capacity
3 Nos. 20A, DP MCB of 10kA Breaking Capacity
Complete panel described as above and as approved by engineer-in-charge including carriage of the materials in all lead and lift..
1
-
-
Supply, Installation, testing and commissioning of 100 AH capacity, 24V DC maintenance free SMF Batteries in fully charged condition, including painted MS stand & spill proof plastic trays etc. complete as required as per specifications. Along with ii) & Battery Charger Unit with provisions of "Boost Charging" and "Float Charging", suitable for 240V, single phase, AC, 50Hz supply system & 24V DC including providing required MCB for DC supply distribution to panel complete of standerd and approved make including carriage of the materials in all lead and lift.
1
-
-
Supply and fixing in position the approved "shock treatment charts" framed in teak wood frame and covered with glass in front as required in two languages (Hindi & English) complete as per skatch Drg. / design and spacifications including carriage of the materials in all lead and lift..
2
-
-
Supply & Laying of non skid Electro mat 1 mtr wide and 3.0 mm thick 11 KV grade conforming to IS 15652 as required including cutting to required length complete as per directions of Engineer-in- Charge including carriage of the materials in all lead and lift.(for HT Panel)
15
-
-
Supply of fire buckets 5 nos. 15 litre capacity duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. The fire buckets shall be painted red from outside and white from inside, including lettered as FIRE with white colour with extra handle at bottom as per approved sample including carriage of the materials in all lead and lift.
1
-
-
Supply & Laying of non skid Electro mat 1mtr wide and 2.0 mm thick 1.1KV grade IS 15652 as required including cutting to required length complete as per approved sample including carriage of the materials in all lead and lift.
25
-
-
Supply of standard first aid box as approved by Indian red cross society/ St.John Ambulance Brigade and conforming to IS 2217-1963 as per approved sample including carriage of the materials in all lead and lift.
1
-
-
DG Sets: Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set of 82.5 KVA at 0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure with built in fuel tank of required capacity along with additional day tank capacity of 990 litres including fuel piping, level indicator and valves as required, with AMF Panel, battery, batter charger, return fuel cooler, anti vibration mounting pads including residential silencer, engine alternator, pcc based auto start & synchronization set, safeties with accessories and control cabling for AMF panel up to 50mtr. length as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722 of standard approved make i/c mechanical and manual means, loading , unloading and hosting etc. complete
1
-
-
Supplying and fixing of undernoted 'B' class MS pipe for DG exhaust complete with bends, elbow, flanges etc. of standard approved make including carriage of the materials in all lead and lift.
-
-
-
125 mm dia pipe
10
-
-
Supply and fixing of 50mm thick compressed mineral wool insulation (Rock wool) for D.G. exhaust pipe with 22 gauge aluminium sheet cladding etc. as required for the under mentioned dia pipe as per approved sample including carriage of the materials in all lead and lift.
-
-
-
125 mm dia pipe
10
-
-
Fabrication of supports for exhaust pipe, fuel pipe or for any other purpose out of M.S. structural steel including supplying and applying of enamel paint of approved shade after one coat of steel primer as per directions of Engineer-in- Charge including carriage of the materials in all lead and lift.
1000
-
-
BOOM BARRIER & TYRE KILLER
Supply installation Testing & Commissioning of Boom Barrier of 4 Mtr. length of Boom arms. Galvanised and RAL Painted with buil in control panel with intensive use. Manual open / close buttons and automatic closing IR device complete with ground loop detection board (for entrance and exit to the main building),100% duty cycle.High intensive use DC barrier. 180-200Nm Operating Torque for. 2 sec Open/close time . Motor current draw : 12A. Max Motor Power: 300W.Max Opening : 90 degree.IP54. Inter-changeable barrier( left to right and vice versa). Ampereomatic feature for high safety in case of failure of safety device. complete as required as per given technical specification approval / direction and including carriage of the materials in all lead and lift.
1
-
-
Supply installation testing & commissioning of portable spike barieer Tyre /Killer suitable to work on manual operation .The main frame is made of 6mm thick flat aluminum strip which made it corrosion resistant,strong and light in weight for easy portability & long durability. Other details are as below, etc. complete of standerd and approved make including carriage of the materials in all lead and lift.
a. Portable Tyre Killer - 4 Mtr.
b. Edge of Spike - 10mm,
c. Height of Spike - 60mm,
d. No. of Spikes - 85 Nos.
e. Total Weight : 7 Kg. (Approx.)
f. No. of Wheels in Packing Box - Two etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements