Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation - HPTDC Tender
Civil And Construction
Eprocure
Opening Date16 Mar 2019
Closing Date27 Mar 2019
Tender Amount₹ 2,72,65,900
Costs
EMD
₹ 2,80,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HPTDB_28499_1Bid Award Id
ViewTender No
UDAAN RCS -II/IVTender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://http://hptdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Annexure Separator Schedule of Labour Rates
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, to the dumping site arranged by the contractor at his own level. Any loss/damage to the public/ private land or property shall be absolute responsibility of the Contractor.
230.23
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m to the dumping site arranged by the contractor at his own level. Any loss/damage to the public/ private land or property shall be absolute responsibility of the Contractor.
17
-
-
Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m to the dumping site arranged by the contractor at his own level. Any loss/damage to the public/ private land or property shall be absolute responsibility of the Contractor.
1299.96
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. complete as per the direction of engineer incharge.
1133.97
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. complete.
42.67
-
-
Supplying chemical emulsion in sealed containers including delivery as specified including carriage of materials in all lead and lift. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
7.2
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
491.8
-
-
Diluting and injecting chemical emulsion for PRE CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under floors and apron using chemical emulsion @ one liters per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the Plinth level , with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
633
-
-
CONCRETE WORK
Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering in foundation and plinth, including carriage of the materials in all lead and lift.
93.33
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All works in foundation including carriage of the materials in all lead and lift.
CC 1:2:4 (1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size)
8.3
-
-
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, but including the cost of carriage of materials.
1.05
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth including carriage of the materials in all lead and lift.
154.87
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size), complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
46.26
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification, work in doses by weight of cement as per manufacturer's specification, complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
12.23
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square meter on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in
kerosene oil, including carriage of the materials in all lead and lift.
46.26
-
-
R.C.C. WORK
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge, including carriage of the materials in all lead and lift.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)
-
-
-
Up to Plinth level
257.98
-
-
Above plinth level up to al floor level
4.07
-
-
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, including carriage of the materials in all lead and lift.
Thermo-Mechanically Treated bars
30700.21
-
-
Providing Centering and shuttering including strutting, propping etc.
and removal of the same including carriage of the materials in all lead and lift.
-
-
-
Foundation, footing, bases of columns etc. for mass
concrete
291.89
-
-
Lintels, beams, plinth beams, girders, bressumers and
cantilevers
240.5
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
127
-
-
Shelves
3.26
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
277.88
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
11.23
-
-
Suspended floors, roofs, landings, balconies and access platform
52.23
-
-
Cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like" Edges of Slab & Brakes in floors and walls, Under 20Cm wide
59.18
-
-
Extra for providing richer mixes at all floor levels with M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note: Cement content considered in M-30 is @ 340 kg/ cum)
48.29
-
-
BRICK WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up all floor level in all shapes and sizes, including carriage of the materials in all lead and lift.
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
65.18
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level, including carriage of the materials in all lead and lift.
Cement mortar 1:4 (1 cement :4 coarse sand)
145.5
-
-
"Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
145.5
-
-
MARBLE WORK
"Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels."Granite of any colour and shade, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Area of slab upto 0.50 sqm
2.35
-
-
Area of slab over 0.50 sqm.
3.16
-
-
Providing edge moulding to 18 mm thick marble and in granite works stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc., carriage of the materials in all lead and lift, complete, as per drawing, design and direction of Engineer-in-Charge.
6.5
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc and carriage of the materials in all lead and lift.
8.39
-
-
Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete, as per drawing, design and direction of Engineer-in-Charge.
5
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including curing etc. all complete as specified and as approved by the architect / Engineer-incharge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite, Brown, Cat Eye or equivalent.
167.35
-
-
WOOD WORK
Providing and fixing paneling or paneling and glazing as per drawing design pattern and instructions of engineer incharge in paneled or paneled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Paneling for paneled or paneled and glazed shutters of 40 mm thickness.
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, including carriage of the materials in all lead and lift.
Grade I, Type II,IS:12823 marked
13
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of 35 mm thickness including ISI marked Stainless Steel butt hinges with necessary screws etc complete including carriage of the materials in all lead and lift.
3
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
300x16 mm
16
-
-
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
300x10 mm
22
-
-
Providing and fixing aluminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
125 mm
26
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete, including carriage of the materials in all lead and lift.
-
-
-
a) Twin rubber stopper
12
-
-
Providing and fixing bright finished 100 mm mortise lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge, including carriage of the materials in all lead and lift.
7
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of the materials in all lead and lift.
1.5 mm thick
6
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) including carriage of the materials in all lead and lift.
3
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete, including carriage of the materials in all lead and lift.
11
-
-
STEEL WORK
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
Tata or equivalent make
53762.44
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, including carriage of the materials in all lead and lift. (Tata or Equivalent make)
In gratings, frames, guard bar, ladder, railings, brackets, gates
496
-
-
In single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
641.3
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge, including carriage of the materials in all lead and lift.
-
-
-
10 x 60 mm
48
-
-
10x120mm
50
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - Part 1 and M.S. top cover of required thickness for rolling shutters, including carriage of the materials in all lead and lift.
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover including carriage of the materials in all lead and lift.
8.1
-
-
Providing and fixing ball bearing for rolling shutters, including carriage of the materials in all lead and lift.
2
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, including carriage of the materials in all lead and lift. (area of grill to be measured).
8.1
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), including carriage of the materials in all lead and lift.
10
-
-
FLOORING
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size, color and shape, except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of the materials in all lead and lift. Nitco, Kajaria, Somany make. (basic rate not less than Rs 50/- per Sqft)
212.9
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
Having size 600x600 mm. Nitco, Kajaria, Somany make. (basic rate not less than Rs 65/- per Sqft)
254
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved size, colour/ shade such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment, complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
20
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm , having 6-8mm thickness of 1st quality conforming to IS : 15622, of approved sample, size shade/color such as white, evory, grey, fume red, brown laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, including carriage of the materials in all lead and lift.
Nitco, Kajaria, Somany make. (basic rate not less than Rs 50/- per Sqft)
32.17
-
-
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liters per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
15.6
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 liters per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
121.22
-
-
Cement plaster in skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement, including carriage of the materials in all lead and lift.
18mm thick
13.76
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing etc. complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand), including carriage of the materials in all lead and lift.
25 mm thick
17.29
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing etc complete, complete, including carriage of the materials in all lead and lift.
1.69
-
-
ROOFING
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of
0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.
Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
-
-
-
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing including carriage of the materials in all lead and lift.
278
-
-
Providing and fixing Colour Coated Galvalume Trapezoidal Profiled sheeting of 0.50mm Thickness tolerance +/-5% Total Coated Thickness TCT of material 550 Mpa for roofing/ cladding application. The Trapezoidal Profiled Sheet shall be 28-32 mm in Crest height with 2 Stiffener Ribs with Subtle Square Fluting in the six pans at Nominal 200 mm centre- to-centre. The end crest shall be designed for anti - capillary action , to avoid any seepage of water through the lateral overlap. The profile shall have return leg for proper side lap.
Coating Specification: Primer Coat: 5-7 microns epoxy primer on both side of sheet. Top Coat: Polyester Top coat 15 -18 microns. Color: as approved by Engineer-in-charge Tolerances: As per IS standards: IS: 15961, IS: 513, IS: 14264.
The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required but including carriage of the materials in all lead and lift.
826.71
-
-
Same as above but for Ridges plain (500 - 600mm)
117.72
-
-
Same as above but for Gutter .(600 mm over all girth)
171.12
-
-
FINISHING
6 mm cement plaster to ceiling in cement mortar1:3 (1 cement : 3 fine sand) including carriage of the materials in all lead and lift.
15.6
-
-
FINISHING
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand) in single coat on floor two level / height, including carriage of the materials in all lead and lift.
425.53
-
-
20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand) in single coat on floor two level / height, including carriage of the materials in all lead and lift.
135.67
-
-
18 mm cement plaster in two coats on fair side of brick / concrete wall, under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand), including carriage of the materials in all lead and lift.
104
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface up to all levels / heights having VOC content less than 50 grams/liters, including carriage of the materials in all lead and lift.
130
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/liters, including carriage of the materials in all lead and lift.
9
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate height priming coat, preparation of surface, etc. complete as per the direction of Engineer Incharge including carriage of the materials in all lead and lift.
On steel work
1229.81
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of engineer incharge, including carriage of the materials in all lead and lift.
265.67
-
-
Applying two coats of Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ liters, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour up to all levels / heights including cost and carriage of painting in all lead and lift.
130
-
-
Finishing walls with two coats of the textured exterior paint of approved shade for new work (Two or more coats applied @ 3.28 liter/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, including cost of primer, paints and scaffolding etc up to all levels / height, including carriage of the materials in all lead and lift.
239.46
-
-
Distempering two coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ liters, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, including carriage of the materials in all lead and lift.
311.13
-
-
Painting two coats with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ liters, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including carriage of the materials in all lead and lift.
29
-
-
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. Complete, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
224
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Made of G.I. wire of dia 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade, including carriage of materials in all lead & lifts.
35
-
-
ALUMINIUM WORKS
Providing and fixing aluminium frame work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic
coating of grade AC 15) including carriage of the materials in all lead lift & height.
635.33
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of the materials in all lead lift and height.
225.38
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc complete as per specifications, drawings and direction of Engineer-in-charge including carriage of the materials in all lead lift & height..
21.26
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge i/c carriage of materials in all lead and lift.
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
2
-
-
With brass cover plate minimum 1.25 mm thickness
10
-
-
Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete including carriage of materials in all lead & lifts.
215
-
-
"Providing and fixing Anodized (AC 15 ) aluminum tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. .complete as per direction of Engineer-in-Charge including carriage of materials in all lead & lifts.
26
-
-
"Providing and fixing 100mm brass locks (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
5
-
-
"Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately), including carriage of materials in all lead & lifts.
24
-
-
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings, specifications and the directions of Engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item): With float glass panes of 8 mm thicknessincluding carriage of materials in all lead & lifts.
70
-
-
Providing and fixing 12 mm thick prelaminated particle board of standard/approve make flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings, design and specifications and directions of Engineer-in-charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides including carriage of materials in all lead & lifts.
3.15
-
-
Structure Glazing
Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shop drawings, the aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge including carriage of materials in all lead & lift (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothing extra shall be paid on this account),
1375
-
-
"Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
"a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalization & drainage and protection against fire hazard complete as per drawings, design, specification and direction of the Engineer Incharge including carriage of materials in all lead and lift:""
b) Fabricating and supplying serrated M.S. hot dip galvanized / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers."
-
-
-
"c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass."
"d) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight."
"e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminum grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing" including carriage of materials in all lead & lifts.
-
-
-
Note:- 1. The cost of providing extruded aluminum frames, shadow boxes, extruded aluminum section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories crepitated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories.
Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing method for a range up to 2000 ml.”
Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
"Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME- 330-10 testing method for a range upto 50mm.
"Seismic Movement Test (upto 30 mm) as per AAMA 501.4- 09 testing method for Qualitative test” Tests to be conducted on site Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
137.46
-
-
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor, including carriage of material in all lead & lift as per direction of Engineer-in-charge.
-
-
-
"Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Air gap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement."
137.46
-
-
WATER PROOFING
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Using rough kota stone
103.02
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge including carriage of materials in all lead & lifts.
-
-
-
Using rough kota stone
125.15
-
-
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Dumb bell with central bulb (180 mm wide, 8 mm thick)
100.6
-
-
Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
2.46
-
-
Supplying and Fixing of Paddler Flanges of 100mm Dia as per Approved Design as directed by Engineer-in-charge including carriage of materials in all lead & lifts.
4
-
-
Road Works
Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom compelte as per direction of Engineer Incharge i/c carriage of materials in all lead and lift.
-
-
-
On bituminous surface @ 0.25kg/sqm
1225
-
-
Painting runway/taxi track/apron marking with adequate no's of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cost of paint and cleaning the surface of al dirt, scales, oil, grease and other foreign material etc. and lining out complete as per the direction of Engineer Incharge including carriage of materials in all lead & lifts.
-
-
-
New work (Two or more coats)
62
-
-
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge including carriage of materials in all lead & lifts.
-
-
-
40/50 mm compacted thickness with bitumen of grade VG- 30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity complete in all respect as per the direction of the Engineer Incharge i/c carriage of materials in all lead and lift.
62
-
-
Supplying and Stacking of Good Earth at Site, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
896.75
-
-
Drainage Works
Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
SANITARY INSTALLATIONS
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of complete. Casino series, Cera make including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid.
7
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
White Vitreous China Wash basin size 530x425mm, casing series, cera make with a pair of 15 mm C.P. brass pillar taps.
8
-
-
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink with drain board as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.
Kitchen sink with drain board, Diamond make including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
510x1040 mm bowl depth 200 mm
1
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge including carriage of materials in all lead & lifts.
Cera make.
3
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, including carriage of materials in all lead & lifts.
-
-
-
15 mm nominal bore( RO WATER), Jaguar or equivalent make.
6
-
-
Providing and fixing C.P. brass angle valve for basin mixer and points of approved quality conforming to IS:8931 a) 15 mm nominal bore, including carriage of materials in all lead & lifts.
Jaguar or equivalent make.
-
-
-
15 mm nominal bore
25
-
-
Providing and fixing CP Brass toilet paper holder including carriage of materials in all lead & lifts. Jaguar or equivalent make.
6
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of the Engineer Incharge including carriage of materials in all lead & lifts.
8
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms, including carriage of materials as approved by the Engineer Incharge.
Jaguar or equivalent make.
7
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including carriage of materials in all lead & lifts.
Jaguar or equivalent mke as approved by the Engineer Incharge.
-
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms, including carriage of materials in all lead & lifts.
7
-
-
Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and wall hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaguar Cat. No.ALD-CHR-583 or equivalent make as approved by Engineer-in-Charge), including carriage of materials in all lead & lifts.
7
-
-
Providing and Fixing 1.5 feet long connecting hose with nuts at both ends complete.(Make: Jaguar Cat.No.ALD-803B or equivalent make as approved by Engineer-in-Charge) for health faucet, including carriage of materials in all lead & lifts.
19
-
-
Providing and fixing soap dish fixed in position by rawl plugs and CP brass screws.(Make- Jaguar Cat. No. ACN-1131N or equivalent make as approved by Engineer-in-Charge),including carriage of materials in all lead & lifts.
1
-
-
Providing and fixing of sink mixer with swivel spout including cutting and making good the wall complete.(Make-Jaguar Cat. No. 23321B or equivalent make as approved by Engineer-in- Charge), including carriage of materials in all lead & lifts.
1
-
-
WATER SUPPLY INTERNAL
Providing and fixing polyethylene-Aluminum- Polyethylene (PE-ALPE) composite pressure pipe IS confirming 15450-UV catabolized with carbon black having thermal stability for hot & cold water supply, capable to with stand temperature upto 80*c including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducer, coupler & connectors etc. with clamps at 1 meter spacing. This includes the cost of cutting chases and including testing of joints complete as per the direction of engineer in charge. Expose wall work. including cutting chases and making good the wall etc. complete including carriage of materials in all lead & lifts.
-
-
-
32 mm nominal outer dia Pipes
15
-
-
40 mm nominal outer dia Pipes
10
-
-
Providing and fixing polyethylene-Aluminum- Polyethylene (PE-ALPE) composite pressure pipe IS confirming 15450-UV catabolized with carbon black having thermal stability for hot & cold water supply, capable to with stand temperature upto 80*c including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducer, coupler & connectors etc. with clamps at 1 meter spacing. This includes the cost of cutting chases and including testing of joints complete as per the direction of engineer in charge, including carriage of materials in all lead & lifts.
Concealed work. including cutting chases and making good the wall etc. complete including carriage of materials in all lead & lifts
-
-
-
20 mm nominal outer dia Pipes
45
-
-
25 mm nominal outer dia Pipes
25
-
-
32 mm nominal outer dia Pipes
25
-
-
Providing and fixing Polyethelene-Aluminium- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer Incharge including carriage of materials in all lead & lifts.
-
-
-
2025 (25 mm OD ) pipe
50
-
-
2532 (32 mm OD ) pipe
70
-
-
3240 (40 mm OD ) pipe
75
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality, including carriage of materials in all lead & lifts.
(screwed end) :
-
-
-
25 mm nominal bore
4
-
-
20 mm nominal bore
6
-
-
32 mm nominal bore
6
-
-
40 mm nominal bore
2
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials in all lead & lifts.
-
-
-
25 mm dia
1
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. complete including carriage of materials in all lead & lifts.
-
-
-
25 mm dia nominal bore
25
-
-
40 mm dia nominal bore
5
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials in all lead & lifts :
20 mm nominal bore
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes i/c fittings etc. complete including carriage of materials in all lead & lift as per direction of Engineer-in-charge. Circular tank, Sintex make.
2000
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1000
-
-
SOIL, WASTE, VENT & RAIN WATER PIPE
Providing and fixing in position up SWR floor trap conforming to IS:13592 including providing necessary steel support and as per Specification. Making proper connection cutting chase / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position complete as required. The hopper and trap shall be set in cement concrete mix 1:2:4 complete as required. (P/S trap) Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge. (110X110mm),including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
14
-
-
Providing and fixing up SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge,including carriage of materials in all lead & lifts.
160 mm outer dia
100
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Make: Supreme/Ashirvad/Prince or equivalent as approved by engineer-in-charge, including carriage of materials in all lead & lifts
110 mm outer dia
105
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets, Kitchen)including carriage of materials in all lead & lifts.
Make: Supreme, Ashirvad & Prince 75mm dia
20
-
-
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes) including carriage of materials in all lead & lifts.
Nothing extra will be paid for supports.(Inside Toilets, Kitchen).Make: Supreme, Ashirvad & Prince
75 mm outer dia
45
-
-
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works,including carriage of materials in all lead & lifts.
127mm (Cat No.-SKSH5,Hilti & chili)
14
-
-
Providing, laying & jointing in position uPVC pipe conforming to IS:4985:1988 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, clamps, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instructions and making good the wall and floor as required.: Make: Supreme/Ashirvad/Prince or equivalent ,including carriage of materials in all lead & lifts.
-
-
-
PVC pipe 110mm-6 kg/cm2
40
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design, including carriage of materials in all lead & lift as per direction of Engineer-in-charge..
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) i/c carriage of materials.
10
-
-
Extra for depth of manholes:
-
-
-
Size 90 x 80 cm With Sewer bricks conforming to IS : 4885
0.45
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
100x100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
5
-
-
"FIRE FIGHTING WORK Supplying and Fixing First Aid Hose Reel, wall mounting swinging type complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments, complete with the following as required, including carriage of materials in all lead & lift as per direction of Engineer-in-charge." 36 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2 as per IS : 12585 25 mm dia ball valve & nozzle. Pressure gauge Drum and brackets for fixing the equipment's on wall. "Connection from riser with stop valve (gun metal) & M.S. Pipe" complete as per the direction of Engineer Incharge i/c carriage of materials in all lead and lift.
2
-
-
Providing and fixing M.S. cabinet fabricated from 16 g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised platform as required (Approx.0.6 m x 0.6 M x 0.45 M ) and approved by the Engineer Incharge including carriage of materials in all lead & lift .
2
-
-
SUPPLY, INSTALLATION, TESTING & COMMISSIONING Mild Steel black pipe (IS: 1239 Part-1) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, dead flange, reducers. etc. including excavation (upto 1.5M deep). Rubble soling, sand filling upto 3 " above the pipe, back-filling with excavated earth, removal of surplus soil and providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS: 10221 complete approved by the Engineer Incharge including carriage of materials in all lead & lift.
Note : Pipes upto and 40 mm dia shall be standard threaded forged steel fittings joints, above 40mm shall be standard M.S. fittings with welded joints. Jindal Hissar/TATA.
-
-
-
100mm dia
60
-
-
80mm dia
4
-
-
50mm dia
2
-
-
25mm dia
7
-
-
20mm dia
2
-
-
Providing and fixing cast iron double flanged non return valves of PN1.6 including nuts, bolts, 3mm thick compressed asbestos gasket, Gunmetal seat, Drilling as per IS:1538, matching flanges as per table "E" complete as per IS:5312 swing type.(For Pumps Only) as approved by the Engineer Incharge including carriage of materials in all lead & lift.
Makes:ZOLOTO/NVR/DEEPAK.
-
-
-
100 MM
1
-
-
Providing and fixing 100mm dia C.I. butterfly valves PN 1.6 complete with Nitrile liner, SS disc, SS stem, bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete as per IS:13095 and as approved by the Enginer Incharge including carriage of materials in all lead & lift.
Makes:ZOLOTO/NVR/DEEPAK or equivalent as approved by engineer-in-charge.
100mm dia
4
-
-
Providing and fixing C.I. butterfly valves PN 1.6 complete with Nitrile liner, SS disc, SS stem, bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete as per IS:13095.
Makes:ZOLOTO/NVR/DEEPAK or equivalent as approved by engineer-in-charge including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
80mm dia
1
-
-
SUPPLY, INSTALLATION, TESTING. & COMMISSIONING OF:
Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
a) Horizontally mounted, centrifugal type single/ multi stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 450 LPM against a total head of 35 M, pressure gauge with GM cocks on the delivery side including bypass arrangement (with 50 valve and upto 5M G.I. Medium pipes) for periodical testing of the working of the testing of the working of the pumping set as per TAC rules.
b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts +_ 15%, 3 phase, 50 HZ A.C. supply 1450 / 2900 RPM of suitable capacity including electric power control panel with all accessories for auto operation of pump e.g., single phase preventer, rotary switch, ampere meter, volt meter , starter of suitable capacity, pressure switches to start the pump at predetermined pressure, necessary power cable from panel to motor (approx. 10 HP or as required) for the above pump coupled with flexible ( all including carriage of materials in all lead & lift as per direction of Engineer-in-charge.)
c) Common bed plate for mounting Pump and Motor fabricated of Motor fabricated of suitable M.S.Channel as per manufacturer*s recommendations.
d) Suitable RC.C Pump-Foundations as per manufacturer's design and 4 nos. Dunlop (cushy foot) heavy duty Ant vibration mounting pads. ( for Sprinkler/Hydrant down comer) with include air vessel, valve, pressure switch, starter, cable etc.
Control Panel for above Pumps
1
-
-
SUPPLY & FIXING OF ISI (IS:15683) marked Portable fire Extinguisher Water type stored pressure (stored pressure) capacity 9 ltrs. with gun-metal cap and nozzle of standard and approved make and complete in all respects including initial fill and wall suspension bracket, of standard/approved make including carriage of materials in all lead & lift. Capacity 9 ltrs.
5
-
-
SUPPLY & FIXING OF ISI marked (IS:15683) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with C02 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667 and wall suspension bracket of standard/approved make including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
4
-
-
Supply and fixing of ISI marked (IS:13849) Portable fire Extinguisher, Dry Powder ABC Type (6kg weight) of standard/approved make including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
3
-
-
Providing and fixing suction coupling for fire brigade draw out connection with nut for female coupling from fire tank with 150 mm dia GI (Heavy Class) pipe and foot valve (Pipe max 8 M long) of standard/approved make i/c carriage of mateirals in all lead and lift.
1
-
-
Electrical Installation Works
SUB-HEAD-I : INTERNAL WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as approved by the Engineer Incharge including carriage of materials in all lead & lift.
-
-
-
Group – C
35
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as approved by the Engineer Incharge including carriage of materials in all lead & lift.
-
-
-
Group – C
110
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class, including carriage of materials in all lead & lift as per direction of Engineer-in-charge. : PVC conduit of standard make as approved by the Engineer Incharge including carriage of materials in all lead & lift.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
150
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
350
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
160
-
-
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
160
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class steel conduit od standard make as approved by the Engineer Incharge including carriage of materials in all lead & lift.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (Steel conduit as required.)
60
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
60
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
30
-
-
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
40
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
35
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit of standard/approved make including carriage of materials in all lead & lift.
-
-
-
20mm dia conduit pipe
30
-
-
25mm dia conduit pipe
130
-
-
32mm dia conduit pipe
50
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit of standard/approved make including carriage of materials in all lead & lift.
-
-
-
20mm dia conduit pipe
40
-
-
25mm dia conduit pipe
130
-
-
32mm dia conduit pipe
20
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. of standard/approved make including carriage of materials in all lead & lift.
27
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. of standard/approved make including carriage of materials in all lead & lift.
41
-
-
Supplying and fixing of call bell / buzzer suitable for single phase,230 volt complete of standard/approved make including carriage of materials in all lead & lift.
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB ''C" curve including connection, penting etcof standard/approved make including carriage of materials in all lead & lift.
(for Geyser & AC)
18
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. of standard/approved make including carriage of materials in all lead & lift. (For light plugs to be used in non residential buildings).
12
-
-
Supply and fixing of perforated 2mm thick CRCA sheet steel powder coated cable tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. of standard/approved make including carriage of materials in all lead & lift.
-
-
-
150mm wide 50 mm depth
40
-
-
WIRING FOR CCTV SYSTEM
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as approved by the Engineer Incharge including carriage of materials in all lead & lift.
970
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete of standard/approved make including carriage of materials in all lead & lift.
970
-
-
SUB HEAD-II : TELEPHONE AND LAN SYSTEM
Providing, laying connecting and testing of multi-core telephone armoured/ unarmoured cable of conductor size 0.6mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable of standard/approved make including carriage of materials in all lead & lift.
-
-
-
2 Pair (4 core) unarmoured cable from Tag block to LV box
200
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit of standard/approved make including carriage of materials in all lead & lift.
-
-
-
20mm dia conduit pipe
30
-
-
25mm dia conduit pipe
250
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit of standard/approved make including carriage of materials in all lead & lift.
-
-
-
1 run of cable
200
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc.of standard/approved make including carriage of materials in all lead & lift.
-
-
-
Supplying and fixing M.S. box with modular type telephone (RJ-11) outlet for Telephone/Intercom complete of standard/approved make including carriage of materials in all lead & lift.
17
-
-
Supplying and fixing of 1 or 2 module (75mm x75mm) size GI boxes with modular base and cover plate for modular switches in recess etc completeof standard/approved make including carriage of materials in all lead & lift.
28
-
-
SUBHEAD-III: DISTRIBUTION BOARD
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. of standard/approved make including carriage of materials in all lead & lift. (But without MCB/RCCB/Isolator).
-
-
-
6 way, Double door
4
-
-
4 way Double door
2
-
-
8 way Double door
2
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. complete of standard/approved make including carriage of materials in all lead & lift.
-
-
-
40 amps
4
-
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. complete of standard/approved make including carriage of materials in all lead & lift.
-
-
-
40 amps
1
-
-
63 amps
3
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. of standard/approved make including carriage of materials in all lead & lift.
-
-
-
Single pole
92
-
-
SUB-HEAD -IV: EARTHING
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt etc. complete i/c cost and carriage of materials.
8
-
-
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc. complete as per the direction of Engineer-in-charge.
140
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable etc. complete including carriage of materials in all lead & lift.
880
-
-
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. complete including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
20
-
-
PLATE EARTHING FOR DG SET & UNITLIZED SUBSTATION
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt complete including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
6
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
4
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required, including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
50
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm), including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
75
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
30
-
-
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re filling etc. as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
45
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
20
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
30
-
-
SUB-HEAD -V : L.V. CABLES
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Upto 35 sq. mm
400
-
-
Above 95 sqmm and upto 185 sqmm
65
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Upto 35 sq. mm
20
-
-
Above 95 sqmm and upto 185 sqmm
1
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Upto 35 sq. mm
130
-
-
Above 95 sq. Mm and upto 185 Sqmm.
20
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
50
-
-
Supply and making end termination with brass double compression gland including providing and crimping of aluminum solder less lugs / ferrules for XLPE armoured power aluminum conductor cable 1.1 KV grade of following sizes:-
-
-
-
4 x 10 sq.mm
2
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Above 95 sq. Mm and upto 185 Sqmm.
10
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Above 95 sq. Mm and upto 185 Sqmm.
10
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required, including carriage of materials in all lead & lift as per direction of Engineer-in-charge..
-
-
-
Above 95 sq. Mm and upto 185 Sqmm.
5
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)
15
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sqmm (Clamed with 1mm thick saddle)
210
-
-
Above 95 sq. mm and upto 185 sq. mm
40
-
-
Supply and making end termination with brass double compression gland including providing and crimping of aluminum solder less lugs / ferrules for XLPE armoured power aluminum conductor cable 1.1 KV grade of following sizes:-
-
-
-
4 X 35 sq. mm (32mm)
2
-
-
3½ X 120 sq. mm (45mm)
2
-
-
2C x 10 sq.mm
13
-
-
2C x 16 sq.mm
2
-
-
4 x 10 sq.mm
2
-
-
4C x 25 sq.mm
4
-
-
3.5 x 70 sq.mm
2
-
-
3½ X 120 sq. mm (45mm)
4
-
-
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
100 mm dia
40
-
-
150 mm dia
40
-
-
HT CABLES
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required, Including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
Upto 120 sq. mm
60
-
-
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11 KV grade as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
3Cx120 Sq.mm.
3
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11 KV grade as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
3Cx120 Sq.mm.
1
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
450
-
-
SUB-HEAD -VI : FIRE DETECTION & PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections etc. complete of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. compelete of standard /approvd make including carriage of materials in all lead & lift .
3
-
-
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete of standard /approvd make including carriage of materials in all lead & lift .
3
-
-
Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. of standard /approvd make including carriage of materials in all lead & lift .
7
-
-
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. of standard /approvd make including carriage of materials in all lead & lift .
1
-
-
Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. of standard /approvd make including carriage of materials in all lead & lift .
14
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete of standard /approvd make including carriage of materials in all lead & lift .
450
-
-
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete compete of standard /approvd make including carriage of materials in all lead & lift ..
14
-
-
SUB HEAD-VII : TELEPHONE AND LAN SYSTEM
Supply, laying connecting and testing of multi-core telephone armoured/ unarmoured cable of conductor size 0.6mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable etc. of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
10 Pair telephone armoured cable
20
-
-
20 Pair telephone armoured cable
30
-
-
Supply, fixing connecting and testing of under noted size of solder less telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted etc. complete of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
20 pair tag block
1
-
-
10 pair tag block
1
-
-
Supplying and fixing M.S. box with modular type (RJ-45) outlet for LAN complete of standard /approvd make including carriage of materials in all lead & lift .
11
-
-
Supply, installation testing and commissioning of pure server based IP-PBX with 24 Analog extension with CLI facilities System complete of standard /approvd make including carriage of materials in all lead & lift .
1
-
-
Supply installation testing and commissioning of Broadband Lan connection complete as required with 10MBPS Speed of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Supply installation testing and commissioning of 24 port L2 Managed switch having port density 24 No's of 10M/100M/1G RJ45 Port POE /POE+ ports , 2 No's of GbE RJ45/SFP Combo Port , 1X console port , Available POE power 370 W , 52 Gbps switching bandwidth , 8K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP feature , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (Approved make - Cisco/Juniper/Axis/Impulse/Mobotix/Avigilon)
1
-
-
SUB-HEAD VIII - DISTRIBUTION PANEL
DISTRIBUTION PANELS Design, manufacture, supply, installation, testing and commissioning of 2 mm thick MS sheet steel fabricated cubicle type Panel dust and vermin proof complete with hinged and lockable doors . The Sheet Steel shall under go minimum eight tank treatment followed by finishing treatment of powder coating with 70 micron minimum thickness. All the panels shall be floor mounted and dead front construction complete with interconnections etc. as per the approval and entire statisfacation of the Engineer incharge including carriage of materials in all lead & lift .
a) The panels shall be FRONT operated, with cable entry from the top bottom. Earth bus shall be part of the panel.) (All MCB to be "C" Curve)
b) The following provisions shall be required to be made in the Distribution Panel as detailed below:
All live accessible parts shall be shrouded with 1mm thick polycarbonate/3 mm thick FRP sheet and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves according to the colour code. SMC shrouds and busbar supports shall be used. All MCCB door handle shall be interlocked and lockable in OFF position.
Galvanized hardware with zinc passivation shall be used in fabrication of Switchboards.
Suitable Aluminum earth bus to be provided throughout the length of Switchboards.
All indication lamps / illuminated push buttons shall be LED type.
Coil of all motor starters shall be fed from 440 V / 230 V Control Transformer.
2A SP MCBs shall be used as backup protections.
All MCCBs shall be variable plug setting type with thermal magnetic Ics = 100% Icu & rotary handle.
-
-
-
All control& power wiring shall be brought out upto the cable alley in the terminal blocks.
An approval shall be taken for each panel before manufacturing.
Provision of one 6/16 amp socket & compartment lighting for each vertical section of main panel.
All breaking Capacity for MCCB to be Ics=100%Icu.
All MCB to be C Curve
A) MDB-1
incoming: 1 no. of 250 Amp FP MCCB of 16 KA breaking capacity & Trip setting as required.
Metering for incoming:
Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459, with CT as required.
Phase indicating lamps RYB with 2 Amps SP MCB back up.
BUSBAR
Electrolytic high conductivity aluminum three phase and neutral bus bars rated at 300 amps, 16KA, insulated with heat shrinkable cultured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.2 sq.mm / amp.
OUT GOING:
3 nos. 63 Amps 10 kA 440 volt FP MCB .
1 nos. 100 Amps 16 kA 440 volt FP MCCB along with 100A FP Contactor.
1 nos. 63 Amps 16 kA 440 volt FP MCCB.
3 nos. 40 Amps 10 kA 440 volt FP MCB .
1 nos. 40 Amps 10 kA 440 volt DP MCB .
MDB describe as above complete in all respect.
2
-
-
Supply and fixing of 2mm thick CRCA sheet steel powder coated Raceway of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. complete of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
150mm wide 50 mm depth
50
-
-
SUB-HEAD IX - FANS, LIGHT FIXTURES :
Supplying, fixing, testing and commissioning of recessed mounted luminaire of 34W LED 600x600mm of 5700K suitable for operation on 230 volt 50 Hz, Single Phase AC supply with all accessories complete for ceiling including carriage of materials in all lead & lift as per direction of Engineer-in-charge. Havel's Cat No: LHEWEBP6IN1W034 or equivalent make.
45
-
-
Supply, Installation, testing & Commissioning of recessed Mounted circular 12W LED down lighter with CRCA / pressure die cast aluminum heat sink & white finish polycarbonate diffuser , complete with electronic LED driver, efficacy better than 90 lumens / watt with CRI 80 including making suitable arrangement for fixing on false ceiling & connection complete of of standard /approvd make including carriage of materials in all lead & lift .
57
-
-
Supplying, fixing, testing and commissioning of Flood light of 70W LED light suitable for operation on 230 volt 50 Hz, Single Phase AC supply with all accessories complete of standard /approvd make including carriage of materials in all lead & lift .
8
-
-
Supply, Installation, testing & Commissioning of 8W LED Mirror Light complete of standard /approvd make including carriage of materials in all lead & lift .
7
-
-
Supplying, fixing, testing and commissioning of wall/ ceiling mounted luminaire of 21W LED, 1200mm Batten light suitable for operation on 230 volt 50 Hz, Single Phase AC supply with all accessories complete of standard /approvd make including carriage of materials in all lead & lift .
10
-
-
Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete with gravity louver and connection with 3 core flexible wire as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
300mm 1400 RPM Heavy duty Metal exhaust fan Havel's make model: Turbo Force SP or equivalent preferred makes, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
2
-
-
Supplying, erection, connecting, testing and commissioning of 1200mm sweep ceiling fan complete with GI Fan Box, blades, down rod, shackle insulator, canopy etc. including providing of electronic step regulator with faceplate matching the existing modular switches etc. complete including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (Similar to Havel's-Pacer)
23
-
-
Supply, unloading, installation at Ground Floor, testing & commission of micro processor / DSP controlled 5 KVA UPS, IGBT based rectifier to achieve THDI 5% and input power factor of greater than 0.95 at 50% loading. True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology , 1 Phase input and 1 phase 230 V output UPS system, including carriage of materials in all lead & lift as per direction of Engineer-in-charge. Each comprising of the following:
125% rated Rectifier cum charger unit +100% rated Invertor, Integrated in UPS module 100% rated External Galvanic isolation transformers of K-13 Delta/Zigzag type for isolation of input neutral with output neutral ,to be installed after UPS as shown in drawing enclosed 100% rated Inbuilt static switch at the invertor output + 2 Nos. 100% rated Inbuilt static switches at the static bypass line.
100% rated Inbuilt Maintenance Bypass. 100% rated molded case battery circuit breaker having I thermal, I magnetic and Automatic U/V trip mechanics. Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments. Supplying, unloading, installation at basement, testing and commissioning of Lead Acid sealed maintenance free batteries for 5 KVA UPS system, for providing 15 minutes backup to 5 KVA UPS for full load. The bank of batteries shall comprise required No's of batteries complete as required. Battery sizing calculation are to be submitted for approval. Supply, unloading, installation at basement, testing & commissioning of matching cabinet/open racks to house SMF batteries for 5 KVA UPS system along with interconnecting links, MCB etc. complete as required & as per specifications. Supply, laying, testing & commissioning of flexible single core copper cable of Finolex / Skyline / Havel's / Nyvin make for interconnections between UPS to UPS, UPS to batteries, UPS to Isolation Transformer, complete as required for 5 KVA UPS,including providing Battery circuit breakers as required. Supply, installation, testing and commissioning of UPS monitoring software suitable for RJ-45 communication and capable of giving pop up messages for all alarms received from UPS. It shall be capable of the following:- Giving notifications like e-mail, paging notification, broadcast notification, battery replacement notification, run event-based scripts. Event logging, data logging and action logging (with date, time, description of fault and event). Run the battery diagnostic test. Automated unattended shutdown of computers. Local notification through audible alarm. Software should support Microsoft Windows NT / 2000 / Server, 2003/XP, AIX, HP-UX, Sun Solaris, Linux, Novell Netware.
UPS describe as above complete in all respect of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photo luminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories complete of standard /approvd make including carriage of materials in all lead & lift .
6
-
-
SUB-HEAD -X : L.V. CABLES
Supply testing of under noted sizes of Aluminum conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
4 x 10 sq.mm Al. Armoured
50
-
-
Supply, laying and testing of undernoted sizes of aluminum conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
4 x 10 sq.mm Al. Armoured
20
-
-
3 x 2.5 sq.mm Al. Armoured
50
-
-
4 x 35 sq.mm Al. Armoured
20
-
-
3.5 x 120 sq.mm Al. Armoured
50
-
-
2C x 10 sq.mm Al. Armoured
240
-
-
2C x 16 sq.mm Al. Armoured
30
-
-
4C x 25 sq.mm Al. Armoured
50
-
-
3.5Cx50 sqmm Al. Armoured
60
-
-
3.5Cx70 sqmm Al. Armoured
60
-
-
MV CABLES
Supplying & Testing of following sizes XLPE, 11 KV earthed armoured cable confirming to relevant IS code of standard /approvd make including carriage of materials in all lead & lift .
-
-
-
3Cx120 Sq.mm.
60
-
-
SUB HEAD-III : EXTERNAL LIGHTINING
1. Supply, Installation, Testing and Commissioning of 16M high mast shaft in two section suitable for 47 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory. Including raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire Included) and with foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template including suitable foundation with provision of cable entry also with LED type single dome aviation obstruction light etc. complete of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
Supply, Installation, Testing and Commissioning of LED flood light of 200W LED suitable for high Mast Operation complete of standard /approvd make including carriage of materials in all lead & lift .
16
-
-
Supply, Installation, Testing and Commissioning of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 4X10 sq. mm and out going 2.5 sq. mm terminals, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
2
-
-
Supply, Installation, Testing and Commissioning of 4mtr high hot dip galvanized octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm the. HT sheet along with base plate of size 200X200X12mm etc. complete of standard /approvd make including carriage of materials in all lead & lift . (Without Bracket)
8
-
-
Supply, Installation, Testing and Commissioning of 4Nos of M16X450 long 'J' type EN 8 grade foundation bolts along with template including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
8
-
-
Supply, Installation, Testing and Commissioning of 7mtr high hot dip galvanized octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm the. HT sheet along with base plate of size 200X200X12mm THICK complete as per the direction of Engineer Incharge
. (Without Bracket)
7
-
-
Supply, Installation, Testing and Commissioning of 4 No's of M20X600 long 'J' type EN 8 grade foundation bolts along with template including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
7
-
-
Supply, Installation, Testing and Commissioning of 1mtr long hot dip galvanized Single arm special bracket (Model: Type-5) cross arm made up of GI pipe suitable to mount on pole having top 70mm A/F etc. complete as per the approval and direction of the Engineer Incharge including carriage of materials in all lead & lift.
Model: Type 5
8
-
-
Supply, Installation, Testing and Commissioning of LED Street Light of 30 W Light Fixture of standard /approvd make including carriage of materials in all lead & lift .
8
-
-
Supply, Installation, Testing and Commissioning of 25 W Gate LED Light suitable for Column Mount and suitable for 220Volt operation complete with wiring etc. complete of standard /approvd make including carriage of materials in all lead & lift .
2
-
-
"SUPPLY & INSTALLATION OF SUBSTATION SAFETY EQUIPMENT:-
SUPPLY OF 160 KVA UNITISED SUB-STATION
Design, manufacture, testing at works, supply of Compact unitized Substation, outdoor plinth mounted type, comprising following components interconnected with one another, including required interconnection with cable/ bus bar and internal earthing connections complete as required and as per specifications including carriage of materials in all lead & lift as per direction of Engineer-in-charge." 11KV Compact secondary substation outdoor type designed for natural cooling having type tested equipment comprising distribution transformer and SF6 insulated compact switchgear enclosed in robotically sealed laser sealed/welded stainless steel tank, low voltage switchboard, interconnection between HT switchgear and transformer using cables and transformer to LT switchgear using Al bus bars/cables, factory built ready for connection type, internal earthing factory completed and other associated equipment etc. complete as required conforming to detailed specifications as per the direction of the Engineer Incharge and carriage of materials through mechnical and manual means. The enclosure shall have modular construction using G.I sheets and shall be painted with polyurethane paint from the exterior. The enclosure for HT & LT switchgear shall be provided with IP54 ingress protection. The transformer compartment will have IP23 ingress protection. The transformer used shall be specially designed for low losses and hermetically sealed with corrugated tank. The components of Compact substation shall be as per details below:
-
-
-
"H.T. PANEL (11KV) 1 way 11KV,(V+M)3 Phase ,50Hz,3 wire, floor mounted ,non extensible, having hinged arc proof cable doors, breaking capacity 21KA SF6 insulated compact switchgear enclosed in stainless steel tank having IP67 degree of protection consisting of following:-" 1 No. 11KV, 630Amps. Tee-off spring assisted type Vacuum circuit breaker unit with self- actuating electronic over current and earth fault relay ,fitted with fixed type voltage indicator device as per IEC 61958 and ring core type protection current transformer along with LV compartment with A ,PF ,Bocholt Relay, auxiliary relays for WTI (Winding Temperature Indication), 4 window annunciation panel and TVM. Air insulated metering panel connected along with above unit, 20KA, 630A having potential transformer,connected jumpers/bus bars ,LV compartment to incorporate voltmeter as per requirement, including providing Voltmeter, Ammeter, Electronic Trivector Meter with MDI, space Heater with Thermostat. TRANSFORMER (Dry Type) WITH OFF LOAD TAP CHANGER 1No. 11KV/433V, 160 KVA three phase, 50Hz, DYn11, Off load tap changer +5% to -10% in steps of 2.5%, mounted inside compact substation enclosure, hermetically sealed,corrugated wall design transformer with Cu winding and standard fittings. As per IS-2026 As Amended up to date expect losses
-
-
-
BUS BARS: Electrolytic high conductivity Aluminium three phase and neutral bus bars rated at 400 Amps, 25KA. Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 1.2 sq.mm./amp LT OUTGOINGS Two Incomer with 433V LT feeder panel having 320A 4P manually operated MCCB, 36KA with microprocessor based O/L, S/C and E/F protection along with phase indication lamps & protection MCB, space Heater & Thermostat including 1 No. 45 KVAR (1 Nos. 20Kvar, 2 Nos. 10Kvar & 1No. 5Kvar), MPPH Capacitor Bank, with 125A TP MCCB, 25 KA service breaking capacity, for direct operation, along with MFM & Phase Indication lamp. Unit Substation comprising I, II, III & IV as described above and as per specifications.
1
-
-
SUPPLY OF MAIN LT PANEL
Design, manufacture, supply, including supervision during installation, testing and commissioning of the following extensible cubicle type indoor mounting, dead front, fully compartmentalized with hinged lockable detachable front & back openable, dust and vermin proof, floor mounting sheet steel clad switchboard fabricated out of 2 mm thick CRCA powder coated sheet steel suitable for use at 415 volts 3 phase 4 wire 50 cycle system and to withstand a symmetrical fault level of 50 KA at 415 volts. Panels shall be fabricated in easily transportable sections, length, height, depth etc. to match with site condition. All incomer breaker shall be interlocked electrically as shown in SLD and specifications including carriage of materials through manual and mechnical means ." The following provisions shall be required to be made in the Main LT Panel as detailed below: The Switchboards shall have provision to accommodate all cables from the bottom /top as required. All live accessible parts shall be shrouded with 1mm thick polycarbonate/3 mm thick FRP sheet and all equipment shall be finger touch proof. The bus bar insulation shall be with heat shrinkable sleeves according to the colour code. SMC shrouds and bus bar supports shall be used. All MCCB door handle shall be interlocked and lockable in OFF position. Galvanized hardware with zinc passivation shall be used in fabrication of Switchboards. Suitable Aluminium earth bus to be provided throughout the length of Switchboards. All indication lamps / illuminated push buttons shall be LED type. All incomer meters of Main LT Panel shall be multifunction & should have all the electrical parameters like Ampere, KW, KVAR, KWH, PF, Frequency etc. 2A SP MCBs shall be used as backup protections. All MCCBs shall be variable plug setting type with thermal magnetic up to 200 A rating and with microprocessor based releases above 200 A rating, line load reversibility, Ics = 100% Icu,& rotary handle, if not mentioned with MCCB. All control& power wiring shall be brought out upto the cable alley in the terminal blocks. All rear door of Main LT Panel shall be almirah type with lockable arrangement. Space heater shall be provided with thermostat with 6A MCB as backup protection in each section of Main LT Panel controlled with feeder 20 A DP MCB 10 KA. An approval shall be taken for each panel before manufacturing. Provision for providing 230V or 24V supply for Dual KWHr metering when any or all DG are in operation One separate compartment of minimum size 400 x 900 mm for power management system of D.C.U.'s with control wiring as per following specification and control wiring scheme: Control wiring shall be looped from each energy meter till DCU's compartment for sending DCU register change command from data connectivity. Provision of one 6/16 amp socket & compartment lighting for each vertical section of main panel. 5 no's extra of each R,Y,B,G,A colour indicating lamp and illuminated push buttons and normal push button shall be provided with main LT panel MIMIC diagram shall be for Main LT panel MIMIC shall be made of polycarbonate sheet of 5 mm thickness fixed on acrylic sheet of 2mm thick. The size of panel shall be such that the diagram can be visualized from 5 to 6 meter distance. The panel shall display complete single line diagram of Main LT Panel. this line diagram shall be made from luminous non fading materials to glow in dark and each breaker legend shall be provided with bi- colour LED lights to show the ON/OFF status of the respective feeder (Incomers / Bus couplers) All CT shall be cast resin type. Class - 3 CT shall be provided up to 60 amp and above that the CT shall be Class - 1. Illuminated push button on Starter Panels of Pumps. Interlocking / Auto start command terminals for starter Panels. All breaking Capacity for MCCB to be Ics=100%Icu. All MCB to be C Curve Additional CT's if required for REF of suitable rating burden / class shall be supplied by the Contractor / Panel Manufacturer. Responsibility of installation of KWHr meter, integration with electrical system, billing system and smooth operation of system shall lie with contractor.
-
-
-
BUS SECTION TRANSFORMER INCOMER (160 KVA) 1 Nos. 320 Amps, 36KA, 440 volt 4-P Electrically operated (Motorized) MCCB complete with micro processor based tripping mechanism, shunt release (24V DC), earth fault release and inbuilt O/C & SC releases (Microprocessor based) (Required Interlocking with other incomers to be provided as per Interlocking / operation scheme indicated in SLD). The MCCB shall have suitable arrangement for termination of Cable on incoming side and bus bar connection at outgoing side, complete as required "Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port with 3 Nos. current transformers of 3200/5 ratio, 15 VA Class. 1.0 for metering." 6 no's NO/NC contacts for remote opening & closing. Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 1 set of three phase indicating lamps along with 2A SP MCB backup protection. Spring charge & DC supply healthy indicating lamp with 2A SP MCB backup protection. 1 no. current transformer of 320/5A ratio Class 1.0, 15 VA Burden for PF correction relay. Motor wound spring closing mechanism. Suitable arrangement to receive 1Runs 1.1KV 3.5C X 240 SQ.MM AL. armoured XLPE Cable. T-N-C Breaker control switch. Control MCB, control terminals& wiring as required. One auto/manual selector switch. Combined Under voltage and over voltage relay, 3 Phase with Time delay setting. Restricted Earth Fault Relay ,
-
-
-
DG INCOMER (82.5 KVA) 1 Nos.160 Amps, 25KA, 440 volt 4-P Electrically operated (Motorized) MCCB complete with micro processor based tripping mechanism, shunt release (24V DC), earth fault release and inbuilt O/C & SC releases (Microprocessor based) (Required Interlocking with other incomers to be provided as per Interlocking / operation scheme indicated in SLD). The MCCB shall have suitable arrangement for termination of Cable on incoming side and bus bar connection at outgoing side, complete as Required Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of THD, KVARH KW, KWH, KVAR, PF, V, A, Hz , equivalent to EM6400, with 3 Nos. current transformers of required ratio, 15 VA Class 1.0
6 no's NO/NC contacts for remote opening & closing. Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 1 set of three phase indicating lamps along with 2A SP MCB backup protection. Spring charge & DC supply healthy, DG set on, ACB ON indicating lamp with 2A SP MCB backup protection. Motor wound spring closing mechanism. Suitable arrangement to receive incoming cable of 1 runs of 3.5 x 70 sq. mm "Al." XLPE conductor. T-N-C Breaker control switch
-
-
-
Control MCB, control terminals& wiring as required. Combined Under voltage & Overvoltage relay 3 phase with time delay setting, Reverse Power relay. One auto/manual selector switch one set of push buttons for DG start, DG Stop Reset & Emergency Stop. One 16 amp automatic Battery charger with inbuilt facility of trickle / boost & consisting of : DC Ammeter (0-30)V. DC Voltmeter.(0-30)Amp Charger ON, OFF indications . 1 No's 6 Window microprocessor based annunciation panel (for each D.G. set) for following indications & Buzzer : DG set Alarm DG set Fault DC supply failure O/V Fault BUSCOUPLER 1 Nos. 320 Amps, 36KA, 440 volt 4-P Electrically operated (Motorized) MCCB complete with micro processor based tripping mechanism, shunt release (24V DC), earth fault release and inbuilt O/C & SC releases (Microprocessor based) (Required Interlocking with other incomers to be provided as per Interlocking / operation scheme indicated in SLD). The MCCB shall have suitable arrangement for termination of Cable on incoming side and bus bar connection at outgoing side, complete as Required for Bus coupler
-
-
-
BUSBAR Electrolytic high conductivity aluminum three phase and neutral bus bars rated at 400 amps, 25KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.2 sq.mm / amp. Neutral Bus Bar shall be 50% of Phase Bus Bar. OUTGOINGS 1 nos. 250 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases along with 1 No. 200A on Load Changeover each complete with: 1 no's 250/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection. Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified. 5 nos. 100 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases each complete with: 5 nos. 100/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection. Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
-
-
-
1 nos. 250 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases along with 1 No. 200A on Load Changeover each complete with: 1 no's 250/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection. Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified. 5 nos. 100 Amps 25 kA 440 volt FP MCCB with earth fault and short circuit releases each complete with: 5 nos. 100/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection. Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
1
-
-
EXTERNAL LIGHTING PANEL
INCOMER : 1Nos. 80A, 415V, Ics= 16kA, FP MCCB with variable E/F, O/L and S/C releases with set of cast resin C.T.'s of 80A along with 1 set of timer switch with suitable rating of contactor for Automatic Operation including carriage of materials in all lead & lift as per direction of Engineer-in-charge. BUS BARS: Electrolytic high conductivity aluminum three phase and neutral bus bars rated at 100 amps, 16KA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. OUT GOING: 2 Nos. 32A, FP MCB of 10kA Breaking Capacity 3 Nos. 20A, DP MCB of 10kA Breaking Capacity Complete panel described as above.
1
-
-
Supply, Installation, testing and commissioning of 100 AH capacity, 24V DC maintenance free SMF Batteries in fully charged condition, including painted MS stand & spill proof plastic trays etc. complete as required as per specifications. Along with ii) & Battery Charger Unit with provisions of "Boost Charging" and "Float Charging", suitable for 240V, single phase, AC, 50Hz supply system & 24V DC including providing required MCB for DC supply distribution to panel complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
Supply and fixing in position the approved "shock treatment charts" framed in teak wood frame and covered with glass in front as required in two languages, including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (Hindi & English)
2
-
-
Supply & Laying of non skid Electro mat 1 mtr wide and 3.0 mm thick 11 KV grade conforming to IS 15652 as required including cutting to required length complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (for HT Panel)
15
-
-
Supply of fire buckets 5 nos. 15 liter capacity duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. The fire buckets shall be painted red from outside and white from inside, including lettered as FIRE with white colour with extra handle at bottom including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
Supply & Laying of non skid Electro mat 1mtr wide and 2.0 mm thick 1.1KV grade IS 15652 as required including cutting to required length complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
25
-
-
Supply of standard first aid box as approved by Indian red cross society/ St. John Ambulance Brigade and conforming to IS 2217-1963, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
SUB-HEAD -V : DG SETS
Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set of 82.5 KVA at 0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure with built in fuel tank of required capacity along with additional day tank capacity of 990 liters including fuel piping, level indicator and valves as required, with AMF Panel, battery, batter charger, return fuel cooler, anti vibration mounting pads including residential silencer, engine alternator, pcc based auto start & synchronization set, safeties with accessories and control cabling for AMF panel up to 50mtr. length as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
Supplying and fixing of undernoted 'B' class MS pipe for DG exhaust complete with bends, elbow, flanges etc. as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
125 mm dia pipe
10
-
-
Supply and fixing of 50mm thick compressed mineral wool insulation (Rock wool) for D.G. exhaust pipe with 22 gauge aluminum sheet cladding etc. as required for the under mentioned dia pipeincluding carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
125 mm dia pipe
10
-
-
Fabrication of supports for exhaust pipe, fuel pipe or for any other purpose out of M.S. structural steel including supplying and applying of enamel paint of approved shade after one coat of steel primer of reputed company including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1000
-
-
SUB-HEAD -VI: BOOM BARRIER & TYRE KILLER
Supply installation Testing & Commissioning of Boom Barrier of 4 Mtr. length of Boom arms. Galvanized and RAL Painted with built in control panel with intensive use. Manual open / close buttons and automatic closing IR device complete with ground loop detection board (for entrance and exit to the main building),100% duty cycle. High intensive use DC barrier. 180-200Nm Operating Torque for. 2 sec Open/close time . Motor current draw : 12A. Max Motor Power: 300W.Max Opening : 90 degree.IP54. Inter-changeable barrier( left to right and vice versa). Ampereomatic feature for high safety in case of failure of safety device. complete as required as per given technical specification approval and direction and including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
Supply installation testing & commissioning of portable spike barrier Tyre /Killer suitable to work on manual operation .The main frame is made of 6mm thick flat aluminum strip which made it corrosion resistant,strong and light in weight for easy portability & long durability etc. complete of standard /approvd make including carriage of materials in all lead & lift. a. Portable Tyre Killer - 4 Mtr.
b. Edge of Spike - 10mm,
c. Height of Spike - 60mm,
d. No. of Spikes - 85 Nos.
e. Total Weight : 7 Kg. (Approx.)
f. No. of Wheels in Packing Box - Two etc.
1
-
-
SUB-HEAD -XI : CCTV SYSTEM
Supply, installation, testing and commissioning of colour Dome camera with 2 Megapixel along with suitable lens, stainless steel brush finish plate etc. complete as required & as per specifications. (For Basement Lift Lobby and Entrance Hall & Terrace Lobby), including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
14
-
-
Supply, installation, testing and commissioning of C/CS - Metal body colour Day and Night High Resolution 540 lines with auto iris lens including weather proof housing IP-66, suitable mounting bracket with approved finish & colour complete as required as per specification, including carriage of materials in all lead & lift as per direction of Engineer-in-charge. (For Main Gate Entry / Exit )
4
-
-
Supply, installation, testing and commissioning of 1Professional DVR with 16 Video Inputs, H.264 Compression - D1 Display Resolution with 2.5TB HDD, Expandable up to 8 TB. Total recording frames @ 400 fps. Recording based on Continuous, Motion, Scheduled or alarm, Remote backup through TCP/IP,HTTP Networkable, backup by USB/DVDWR, Client software included, POS Transaction data recording with image. Supplied with Licensed OS, keyboard & mouse. complete as required and as per specifications. The DVR shall be integrated with Access control system. (Along with 2 nos. 4 TB.),including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
2
-
-
40" Full HD LED Professional Display for Monitoring with mounting accessories including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 4 MP bullet camera , ONVIF profile S & G ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm motorized varifocal lens ,min illumination : 0.05 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s , 90 dB WDR , SD card support , Alarm trigger - 1 input / 1 output , Video Compression : H.265 ,H.264 , frame rate : 30fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , In built IR LED , IR Distance upto 60 meters , IP 66 , PO. Including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
7
-
-
Supply, installation, testing and commissioning of 1Professional DVR with 16 Video Inputs, H.264 Compression - D1 Display Resolution with 2.5TB HDD, Expandable up to 8 TB. Total recording frames @ 400 fps. Recording based on Continuous, Motion, Scheduled or alarm, Remote backup through TCP/IP,HTTP Networkable, backup by USB/DVDWR, Client software included, POS Transaction data recording with image. Supplied with Licensed OS, keyboard & mouse. complete as required and as per specifications. The DVR shall be integrated with Access control system. (Along with 2 nos. 4 TB.), including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
SUB-HEAD -VI : Water Cooler and Water Transfer Pump
Supply, installation, testing and commissioning of ISI mark Water Cooler of 150Ltr. Tank and 150Ltr. Cooling capacity per hour in fully stainless steel body complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
3
-
-
Supplying, erecting, testing & commissioning of submersible centrifugal pump set suitable to give discharge of 7.5 cubic mtr/hr. (1HP) at a head of 15 mtr complete with Auto starter and 10 meter suitable size of B class GI pipe along with submersible cable of 3x2.5sq.mm size 15mtr in length from starter to motor , link chain with hook of suitable size for hanging the pump in underground reservoir and complete as required including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
1
-
-
SUB-HEAD -XII : HVAC SYSTEM
Hi-wall Split Unit (Heat & Cool Model)
Supply, installation, testing and commissioning of Hi-wall Split Unit (5 Star Rating) with rotary compressor & cordless control of following capacity with wall/floor mounted outdoor unit stand including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
1.5 TR Air-Cooled Split Unit ( Heating + Cooling)
8
-
-
2.0 TR Air-Cooled Split Unit ( Heating + Cooling)
9
-
-
Refrigerant Piping
Supply, installation, testing and commissioning of additional refrigerant piping (two lengths) duly insulated with 25 mm for indoor application and 38 mm for outdoor application closed cell nitrile rubber of density 60+/-10% Kg/m3 to interconnect indoor & outdoor units for each circuitincluding carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
For 1.5 TR Unit
30
-
-
For 2.0 TR Unit
70
-
-
Condensate Drain Piping
Supply, installation, testing & commissioning of PVC Hard drain piping with fittings, valves & insulation with 13 mm for indoor application closed cell nitrile rubber of density 60+/-10% Kg/m3, including carriage of materials in all lead & lift as per direction of Engineer-in-charge.
-
-
-
25 mm Dia. of pipe, PVC Hard Pipe
30
-
-
32 mm Dia. of pipe, PVC Hard Pipe
70
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements