Himachal Pradesh Tourism Development Corporation Tender

Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.

Himachal Pradesh Tourism Development Corporation Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date7 Mar 2024
Closing Date22 Apr 2024
Tender Amount₹ 88,10,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

521.1

-

-

... More
Stone soling of approved qualitty hand packed under floors including carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

285.14

-

-

... More
Surface dressing in all kind of soils , for the ground including removing vegetation and in-equalities upto all heights and disposal of rubbish materails upto dumping site of HPPWD/MC as approved by Engineer-in- Charge.

29136.5

-

-

... More
Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of up to all girth measured at a height of 1 m above ground level and removal of rubbish with in all leads and lifts as per the direction of Engineer-in- Charge.

16775.75

-

-

... More
Providing and laying in position cement concrete 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

280

-

-

... More
Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

3922.14

-

-

... More
Providing and laying, mechanically mixed and vibrated cement concrete 1:5:10 (one cement:Five sand Ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including carriage of material in all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

462.26

-

-

... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cementm:2 course sand : 4 graded stone aggregate 12.5 mm nominal size ) including carriage of material in all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

36.42

-

-

... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7Per Kilogramme per square Per running Metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including including carriage of material in all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

298.81

-

-

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.including including carriage of material in all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

480.74

-

-

... More
Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in including carriage of material in all leads and lifts of materials as per direction of Engineer -in -charge.

-

-

-

... More
Foundation ,footing basis of columns etc. and mass concrete .

4671.17

-

-

... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

18089.39

-

-

... More
Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness

7198.16

-

-

... More
Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels.

2885.91

-

-

... More
Columns, pillars ,posts and struts square, rectangular or polygonal

6284.19

-

-

... More
Stair case with sloping or stepped soffits.

495.62

-

-

... More
Edges of slab and breaks in floor and walls. under 20cm width

809.16

-

-

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more..(TATA/Sail/Jindal Make or equivalent ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

763310.53

-

-

... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard Per Setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge.“( Note :- Cement content considered in this item is @ 330 Per Kilogramme/Per cubic Metre.“Excess/ less cement used as per design mix is payable/recoverable separately) i/c carriage of materials upto all lead & lift as per direction of Engineer in-charge..

-

-

-

... More
All works upto plinth level

5424.76

-

-

... More
All works above plinth level upto all floor level.

2223.39

-

-

... More
Providing and fixing weepholes 100mm dia PVC pipe for (D-Plast/Polyplast or equivelent ISImark 2.5 Per Kilogramme pressure)for Retaining wall/ breast wall in CC/RR/SR Masonry, as per drawing and technical specification including carriage of material upto all leads and lifts as per direction of Engineer-in-charge.

640

-

-

... More
Back filling with well graded stone boulders behind Retaining wall complete including carriage of material upto all leads and lifts as per direction of Engineer-in-charge.

1800

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. (2nd class)

777.22

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. (2nd class)

1840.88

-

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level. Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. (2nd class)

2043.91

-

-

... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

2043.91

-

-

... More
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

214.27

-

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished , premoulded and prepolished, machine cut granite in flooring and kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

785.58

-

-

... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

600.15

-

-

... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

86

-

-

... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

7.44

-

-

... More
Wall lining butch work upto all floor height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

445.5

-

-

... More
Providing & fixing GRC unistone tile cladding of size as per architecturl drawings in all colours and shades as approved by Engineer-in- charge over 12 mm thick bed of cement mortor 1:3(one cement:three course sand)and jointed with grey cement slurry @3.30Per Kilogramme /Per Square Metre complete complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

2026.15

-

-

... More
Providing & fixing Manglore tile cladding of size as per architecturl drawings in all colours and shades as approved by Engineer-in- charge over 12 mm thick bed of cement mortor 1:3(one cement:three course sand)and jointed with grey cement slurry @3.30Per Kilogramme /Per Square Metre complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

154.22

-

-

... More
Providing Second class teak wood work in frames of door , windiows, clerestrory windows and other frame wrought frames and fixed in poition with hold fasts lugs or with dash fasteners of required dia & length ( Hold fasts and lugs or dash fasteners shall be paid sepertely complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

17.59

-

-

... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.Sal wood

8.55

-

-

... More
Providing and fixing 35 mm ISI marked flush door shutters with Stainlerss steel strips , Stainless Steel butt hinges conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutterscomplete i/c carriage of materials upto all lead & lift as per direction of Engineer in-charge.

414.31

-

-

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). .inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

414.31

-

-

... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

414.31

-

-

... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge. (50 x 20) mm 2nd class teak wood

1870.9

-

-

... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

712.42

-

-

... More
Extra for using veneered particle board with decorative veneering on both sidesconforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

712.42

-

-

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge. Fixed to steel windows by welding make (TATA/Sail/Jindal Make or equivalent )

4122.18

-

-

... More
Providing and fixing bright finished SS tower bolts grade-304 (barrel type) with screws complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
250x10mm

172

-

-

... More
200x10mm

166

-

-

... More
150x10mm

56

-

-

... More
Providing and fixing bright finished SS door latch grade-304 with necessary screws etc. complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
300X16X5 mm

111

-

-

... More
250x16x5 mm

63

-

-

... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

182

-

-

... More
Providing and fixing bright finished SS handles grade-304 with screws etc. complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.150mm

1000

-

-

... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

182

-

-

... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 Per Kilogramme and door width upto 700 mm), with necessary accessories and screws etc. complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

131

-

-

... More
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete.inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge. 250 mm weighing not less than 280 gms

338

-

-

... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

-

-

-

... More
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

34.29

-

-

... More
Providing and fixing factory made uPVC white colour casement/ Casement Per cubic Metre fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge including . Single / double glass panes and silicon sealent etc.complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.(i)For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Casement door with 3D hinges made of (big series) frame 67x64 mm@ sash 67x110 mm both having wall thickness of 2.3 +0.20 mm and single g;lazing bead / double glazing beas of appropriate dimension ( Area of dorr upto 2.00Per Square Metre)

83.48

-

-

... More
Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 Per Square Metre)

18.72

-

-

... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Per Kilogramme), G.I fasteners 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing framethe gap between frame and adjacent finished wall shal be lefilled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

-

-

-

... More
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 Per Square Metre).

173.06

-

-

... More
Providing and fixing frame work for partitions/ wall lining etc. made of Aluminium sections (75x75X3.2)mm placed along the walls , ceiling and floor in a grid pattern with spacing at the rate of 90 cm centre to centre both ways ( vertical & horizontally or at the required spacing near opening with necessary cutting and fixing with neceesry screws and accessories at junctions and fixing the frame to wall/ celing / floors with steel dash fastners of 8mm 75mm long bolts and provision od ACP board 4 mm / 6mm thick glass with neceesary rubber gaskets as per site requirement including making provision for opening for doors, windows , electrical conduits, switch boards etc complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

190.6

-

-

... More
Providing and fixing wall panelling/ lining with Decorative Teak - Three Ply bonded with BWP type Synthetic resin adhesive as per IS :848 on pre leminated flat presed 18mm thick medium density particle board or graded wood particle board IS: 3087 marked, Fixed on frame work of 1st class hard wood on walls with necessary screws/rawl plugs complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

99.72

-

-

... More
Providing and fixing 3D Ripple Wall panels 18mm thick( Product code =Rust-01) of approved Make with necessary fixing arrangement complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

232.68

-

-

... More
Providing and fixing 3D panels white gold 18 mm thick(Product name :-DECO-02) of approved Make with necessary fixing arrangementcomplete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

314.61

-

-

... More
Providing and laying 18mm thick Turkish Onyx marbal stone Clading polished slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

28.8

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W1 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2400 mm x 5640 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction of Engineer Incharge /Project Manager complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

27.07

-

-

... More
Providing and fixing Aluminium Alupure casement ACP 46mm door series W2 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2400 mm x 2590.00 mm complete in all respect including accessories etc. as per drawings and specifications complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

24.86

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W3 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 2500 mm x 5640mm complete in all respect including accessories etc. as per drawings and specifications including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

28.2

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W4 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 1800mm x 1500 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

48.6

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W5 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2770 mm x 5640 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

31.25

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W7 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2770 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

14.35

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W7A glass window make Saint- Gobain , Modi glass , AST or equivalent , inprofile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 900 mm x 4950 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge. .

53.46

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W8 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 2500 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

25.9

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W9 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profle outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 4900 mm x 2400 mm complete in all respect including accessories etc. as per drawings and specificationsincluding carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

11.76

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W10 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :4900 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

25.38

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W11 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2965mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

61.43

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W12 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :4900mm x 1350 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

6.62

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W13 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :4770 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

49.42

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series D10 glass door make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , door size : 3200 mm x 2850 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

18.24

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series G1 glass window make Saint- Gobain , Modi glass , AST or equivalent , in profile outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 3000 mm x 3000 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

27

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series G2 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 1960 mm x 9450 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

18.52

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series G3 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 3300 mm x 1050 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

13.86

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series G4 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 8045 mm x 1050 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

33.79

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series V1 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 1200 mm x 600 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

21.6

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series V2 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 1800 mm x 600 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

25.92

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series D9 glass door ,make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , door size : 2400 mm x 2400 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

155.52

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W6 glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size : 8340 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

43.2

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series D11 glass door ,make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , door size : 5400 mm x 2580 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

13.93

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series D12 glass door ,make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , door size : 6200 mm x 4010 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

24.86

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series W2 Cottage glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :2400 mm x 2590 mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

74.59

-

-

... More
Providing and fixing Aluminium Alupure casemenr ACP 46mm door series V1 Cottage glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :1200 mm x 600mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfaction including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

8.64

-

-

... More
Providing and fixing Aluminium Alupure Sliding APSL 31 mm door series Slider Cottage glass window make Saint- Gobain , Modi glass , AST or equivalent , in prof[le outer : 84105 , Mullion : 84301 , toughened glass colour : ST-167 , thickness 8 mm , window size :6650mm x 2950mm complete in all respect including accessories etc. as per drawings and specifications to the direction and entire satisfactionincluding carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

235.41

-

-

... More
Supplying and installation of Low Relief FRP 6.0 mm thick gate design as per drawings made of good quality FRP, composite, interior and model making materials etc. complete as per approved artwork, shop drawings & Visual representations duly installed at site and complete in all respect and as per direction of Engineerin-in charge including but not limited to passages for services, lights and produced as per standard best practices of moulding, casting, finishing, coloring, painting, installation and MS structure as per approved design and RCC work over it etc. Item to be inclusive of all frame works, sub construction, supporting structures required for installation of the low relief FRP. Note: Mode of measurement should be paid the flat front elevation area.complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

45

-

-

... More
Supplying and fixing of Door Size 1200mm x 2400mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

5.76

-

-

... More
Supplying and fixing of Door Size 900mm x 2400mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

12.96

-

-

... More
Supplying and fixing of Window Size 1500mm x 1600mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

4.8

-

-

... More
Supplying and fixing of Window Size 1800mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete to the entire satisfaction of Engineer-in- Charge.

16.2

-

-

... More
Supplying and fixing of Window Size 1500mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

13.5

-

-

... More
Supplying and fixing of Ventilator Size 3600mm x 600mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

8.64

-

-

... More
Supplying and fixing of Door Size 1200mm x 2400mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

2.88

-

-

... More
Supplying and fixing of Window Size 900mm x 1200mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mm clear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

2.16

-

-

... More
Supplying and fixing of Window Size 1500mm x 1500mm: Aluminium system with glass & Hardware including silicon and EPDM gasket & power coating i.e Alupure / Totalis/Hindalco) (Casement ACP 46mm with glass 8mmclear/printed toughened ( Saint Gobain/ Gold Plkus/ AIS) , Door closers Pego, Enox, Hardwyn, in wooden clour and texture Doors complete with all fitting and fixtures complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

4.5

-

-

... More
Providing and fixing MS bridge Arch shape size 7.0 m x 3.65 m x 0.76 m as per drawing and design, all joints mitred, welded and grinded finish, with profiles of required size & steel members painted with rust proof primer and black paint. flooring with wooden Planks 50mm thick over M.S chequered plate & railing made of seasoned Deodar wood design as per drawing & Melamine polish on wooden all members including civil work , all fittings etc. complete in all respect including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

4

-

-

... More
Providing and fixing 12 mm thick toughaned glass railing 0.90 m high with acid etching fixed in the alumnium frame size 70+130 mm block both sides cover plastic in powder coating with LED light integtated in hand rail as per approved drawing and design including all fittings and fixtures including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

103.49

-

-

... More
Providing and fixing HPL Cladding 6 mm thick of approved quality and design on walls upto all height over a aluminium frame work of size (50x25mm) work with necessary screws / fixtures complete including frame work and carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

933.31

-

-

... More
Providing and fixing WPC ( Wood plastic Composite ) panel / louvers 25 mm thick walls and celing upto all height over a aluminium frame work of size (50x25mm) work with necessary screws / fixtures complete including frame work and carriage of material in all leads and lifts as per the direction of Engineer-in- Charge

462.38

-

-

... More
Providing and fixing thermo pine wooden member/ plankes size 117mm (W) x12mm thick 25 mm thick walls and celing upto all height finished with UV Oils to ensure long life over a aluminium frame work of size (50x25mm) work with necessary screws / fixtures complete including frame work and carriage of material in all leads and lifts as per the direction of Engineer-in- Charge

2584.84

-

-

... More
Supplying and fixing rolling stain less steel rolling shutters of make TATA/Jindal/SAIL or equivalent made of required size stainless laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and stainless steel top cover of required thickness for and including cost of stainless steel grill as per design complete in all respect . 80x1.25 mm M.S. laths with 1.25 mm thick top cover i/c carriage of materials upto all lead & lift as per direction of Engineer in-charge.

9.9

-

-

... More
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.Make Tata /Jindal/sail or equvalent

46857.72

-

-

... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) in trusses etc. make Tata /Jindal/sail or equvalent including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Hot finished welded type tubes. including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

159788.71

-

-

... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

475.7

-

-

... More
Providing and fixing bolts including nuts and washers complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

2125.2

-

-

... More
Steel work in built up sections/frame work (round, square or rectangular hollow tubes etc). make tata/ sail/ equivalent including cutting hoisting, fixing in positioin and applying a priming coat of approved steel primer using structural steel etc as required. including carriage of materials upto all lead & lift as per direction of Engineer in-charge. In grating frames guard bar ladder , brackerts, gates and similar work complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

31608

-

-

... More
Providing and fixing hand rail make tata/ sail/ equivalent of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.MS Tube including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

690.05

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,M18 Foundation Bolts with Leveling Nut (Grade 5.5 HD) Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requireddepth including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge..

-

-

-

... More
Threaded rod M20x3000 8.8 zinced

565

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI" : #RE500- SD EPOXY SS "HILTI" HAS-E-R BOLTwith M18 x 125 / 50 (Min 175 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod 20X240

28

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI" : #RE500- SD EPOXY SS "HILTI" HAS-E-R BOLTwith M12 x 125 / 35 (Min 160 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M12x160

16

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,HILTI" : #RE500- SD EPOXY SS "HILTI" HAS-E-R BOLTwith M16 x 130/ 45 (Min 175 mm long Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 M16x190

85

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,M32 Foundation Bolts with Leveling Nut (Grade 5.5 HD) Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Threaded rod, AM33x1000 8.8 zinced

50

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITHM18 x 125 /38 (Min 175 mm long)/Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M20x240

10

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITHM20 x 170 / 45 (Min 240 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M20x240

20

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITH M18 x 125 / 34 (Min 175 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M20x240

20

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITH M16 x 125 / 35 (Min 190 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M16x190

460

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITH M16 x 125 / 40 (Min 175 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M16x190

125

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITH M20 x 170 / 45 (Min 240 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M120x240

20

-

-

... More
Providing and fixing in postion at site reinforcement,Ties &Bars Size, ,"HILTI" : #RE500- SD EPOXYSS "HILTI" HAS-E BOLT WITH M16 x 125/ 45 (Min 190 mm long /Foundation Bolt Length to be Depend Upon Soil / structure Condition with Hilti soultion including driiling holes of required size, cleaning and ejecting the hilti solution to the requiredc depth complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

-

-

-

... More
Anchor rod HAS-U A4 ,M16x190

110

-

-

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).including carriage of material with in all leads ,lifts in all floor levels and other incidentals.

1356.07

-

-

... More
Providing and fixing of dormakaba ES 200 easy sensor glass door 4.15 Per running Metres with lock ,12 mm plain toughened glass for opening size 2.50 x 2.50 ( 8.5 ' x 8.5' ) . The item includes the cost of material ,sensors , carriage in all leads and lifts , scaffolding and other accessories complete in all respect as per drawings and specifications of Dorma make as per direction complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

6.25

-

-

... More
Providing and laying 20-25 mm thick kota Stone slabs in flooring laid on 12 mm (average) thick cement mortar 1:4 (1 cement: 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts as per the direction of Engineer in Charge

77.38

-

-

... More
Providing and laying 20 mm thick Kota stone slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts as per the direction of Engineer in Charge

6.72

-

-

... More
Providing and laying 18mm thick polished granite stone slab slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material in all leads and lifts as per the direction of Engineer in Charge

248.24

-

-

... More
Providing and fixing walnut chestnut parquet wooden flooring 18mm to 20mm planking, tongued and grooved on a prepared surface including base layer of rapid damp proof membrane as per desing and sample approved by the Engineer in Charge complete including carriage of material in all leads and lifts as per the direction of Engineer in Charge

963.82

-

-

... More
Providing and fixing 20-25 mm thick wooden decking made from highest quality seasoned and treated Teak wood finished with UV Oils to ensure long life over the Aluminium frame work on required spacing as per drawing complete including frame work and carriage of material in all leads and lifts as per the direction of Engineer in Charge

394.53

-

-

... More
Providing and fixing 20mm wooden plank ceiling , tongued and grooved including fixing with iron screws complete with : Second class teak wood complete including carriage of material in all leads and lifts as per the direction of Engineer-in- Charge.

135.22

-

-

... More
Providing and fixing 117 mm width 12 mm thick made from highest quality seasoned and treated Thermo Teak wood finished with UV Oils to ensure long life over the Aluminium frame work size (35x35mm) on required spacing including frame work as per drawing and design complete including carriage of material in all leads and lifts as per the direction of Engineer in Charge.

360.13

-

-

... More
Providing and laying NITCO/KAJARIA Make or equivalent double charged digital Anti skid floor tiles 600x600x12 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

151.22

-

-

... More
Providing and laying NITCO/KAJARIA or equivalent vetrified Glazed Ceramic floor tiles of size 300x300x12 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including pointing the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

3019.5

-

-

... More
Providing and laying NITCO/KAJARIA Make or equivalent double charged digital vitrified floor tiles 600x600x12 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

1694.14

-

-

... More
Providing and laying NITCO/KAJARIA or equivalent vetrified Glazed Ceramic floor tiles of size 300x600x12 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including pointing the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

1944.73

-

-

... More
Providing and fixing glazed NITCO/KAJARIA or equivalent screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 Per Kilogramme/Per Square Metre including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge

537.15

-

-

... More
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Per Kilogramme/Per Square Metre including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc.all complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

1503.2

-

-

... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 Per Kilogramme per Per Square Per running Metre and grouting of the same. The rate is inclusive of all operation, material and required pattern approved as per drawing .inlcuding carriage of materail in all leads and lifts as per the direction of Engineer-in- Charge.

930.35

-

-

... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. as per approved sample. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

382.66

-

-

... More
Providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. as per approved sample. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.

703.29

-

-

... More
Providing and fixing Granite pavers /cobbles as per drawing and design and specifications 200X 100 X 100mm Pattern over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1900.9

-

-

... More
Providing and fixing multi colour Rubber Tile flooring 40 mm thick made of SBR ( Styrene Butadiene Rubber ) with interlocking arrangement and adhesive complete in all respect as per drawings and specifications complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

238.18

-

-

... More
Providing and fixing wall to wall carpet -BROADLOOM SOFT TOUCH BRAND-45 MOCHA ,including all adhesive etc. complete in all respect as per drawings and specifications as per direction and to the entire satisfaction of Engineer in Charge .inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

81.66

-

-

... More
Painting top of roofs with bitumen of approved quality @ 17Per Kilogramme per 10 Per Square Per running Metre impregnated with a coat of coarse sand at 60 cudm per 10 Per Square Per running Metre, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge With residual type petroleum bitumen of grade VG -10

550.47

-

-

... More
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusha @ 35 Per Kilogramme per Per cubic Per running Metre of earth and gobri leaping with mix 1:1 (1 clay : 1 cowdung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690 inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

550.47

-

-

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

14

-

-

... More
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to all height of floor level, over GI channel gride of required size and reinforced with rabbit wire mesh fixed to screwes/hanger etc. inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge

-

-

-

... More
1 Flat surfaces

2419.64

-

-

... More
Curved surfaces

846.87

-

-

... More
Extra for sunk or raised mouldings in the plaster of Paris(Gypsum anhydrous) ceiling.

1814.73

-

-

... More
Providing and fixing GI channel gride of required size and pattren for pop (plaster of paris work) complete including screwes / hangers etc .as per direction and to the entire satisfactioncomplete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/jindal or equivalent.)

6533.03

-

-

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 100 mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes .complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge. Make finolex or equivalent

696

-

-

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge. Make finolex or equivalent

-

-

-

... More
100 mm bend

36

-

-

... More
100 mm Shoe

49

-

-

... More
Providing and fixing unplasticised -PVC pipe clips for 100 mm diameter of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. for pipe complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

296

-

-

... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

159

-

-

... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Per Square Metre (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screwsof size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,specification and direction of the Engineer in Chargecomplete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
12.5 mm thick tapered edge gypsum moisture resistant board

1194.82

-

-

... More
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia Per running Metre with prepainted limpet and rubber washers complete inlcuding carriage of materail in all leads and lifts as per the direction of Engineer in Charge (Make TATA/SAIL or equivalent.)

3204.31

-

-

... More
Providing and fixing prepainted steel sheet roofing accessories 0.60 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per Per Square Metre asper IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tappingscrews complete in all respect as per drawings and specifications including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Ridges plain (600 - 900mm)

274.76

-

-

... More
Valley Plain 900mm

168.22

-

-

... More
Flashings/ Aprons.( Upto 600 mm)

25.53

-

-

... More
North light curves

20

-

-

... More
Barge board (Upto 300 mm)

518.18

-

-

... More
Crimp curve

65

-

-

... More
Gutter (600 mm over all girth) As per Design & Drawing

518.18

-

-

... More
15mm cement plaster in single coat on fair /rough side of brick/concrete/stone walls for External and internal plastering upto all heights and above including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

11337.39

-

-

... More
6mm thick Cement plaster to ceiling including sides and bottom of beams, soffits of stairs, ramps etc. with cement mortar 1:3 (1cement : 3 fine Sand) including curing and carriage, leads of all kinds of materials and scaffoldings etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

2960.45

-

-

... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors including Priming coat as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 Per Square Per running Metre over an under coat of primer applied @0.75 ltr/10 Per Square Per running Metre of approved brand and manufacture including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Make( Asian/ Nerolac )

5631.52

-

-

... More
Finishing with Epoxy paint (two or more coats) on MS steel work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge make( Asian/ Nerolac )

111.58

-

-

... More
Finishing Wall painting for interiors and exteriors with acrylic emulsion paint of approved brand and manufacture to give an even shade :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge make( Asian/ Nerolac )

14326.25

-

-

... More
Providing siprit frensh polish two or more coat including a coat of wood filler including appropriate priming coat, preparation of surface, etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge

380.88

-

-

... More
Providing and applying two or more coat white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including appropriate priming coat, preparation of surface, etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge

14326.25

-

-

... More
Providing and applying primer of approved brands / Asian/ Nerolac / or equivlent over a prepared base of putty on walls to prepare the surface even and smooth including appropriate priming coat, preparation of surface, etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge

14326.25

-

-

... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 Per running Metres i/c equivalent design mix) including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1900.92

-

-

... More
Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarsesand and graded stone aggregate of 40 mm nominal size in appropriateproportions as per approved & specified design criteria, providing dowel bars wirh sleev / tie bars where ever required, laying at site , spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope / camber , finishing with required texture , including steel form work with strudy MS Channel sections, curing, making provisions for contraction/ expansion , construction & longitudnla joints (10mm wide & 50 mm deep ) by groove cutting machine , providing and filling joints with filler and sealent , complete as all as per directions of Engineer in Charge ( Item of Joints filler, sealent dowel bars with sleeve / tie bar to be paid seperately) Cement content considered M-30 is @340Per Kilogramme per Per cubic Metre. Excess/Less ( Cement concrete prepared in Batch Mixing machine )including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1237.76

-

-

... More
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mmnominal size) over 75mm bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc.including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

297

-

-

... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

123

-

-

... More
Construction of granular Sub-base by providing close graded Material confirming to specifications, mixing in mechanical plant at OMC carraige of materail by Tipper to site of work, for all leads and lifts , spreading in uniform layers of specific thickness with motor grader on prepared sursface and compacting with vibratory power roller to achieve the desired density ( With materail confirming to Grade-II ( Size range 53 mm to 0.075 mm ) Having CBR Value 25 complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1080

-

-

... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet Mix macadam (WMM) Specifications including premixing the materail with water at OMC in for all leads and lifts laying in uniform layers with mechanical paver finisher in sub base / base course on well prepared surface and compacting with vibratory roller of 10 tonne capacity to achive the desired density , complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1080

-

-

... More
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in- Charge. The glow stud shall support a load of 13635 Per Kilogramme tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

100

-

-

... More
Providing Retro-reflective regulatory sign board of size 900 mm dia metermade out of 2 mm thick aluminium sheet, face to be fully covered with highintensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A.The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of syntheticenamel paint over an under coat(primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coatcomplete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

12

-

-

... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge..

270

-

-

... More
Providing and laying factory made chamfered edge Cement Concrete interlocking paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Make NTC

-

-

-

... More
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern

5811.16

-

-

... More
40 mm thick C.C. paver block of M-30 grade with approved color design and pattern

5194.4

-

-

... More
Supplying and stacking of good earth at site including royality and carraige of earth up to all leads and lifts complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1900.2

-

-

... More
Providing and laying Seed Grassing with Special Grade -1 grass including watering and maintanance of the lawn for 45 days or more till the grass form a thick lawn free from weeds and fire for movoing including supplying good earth needed including carriage of materail in all leads as and lifts as per the direction of Engineer-in- Charge.(in Row 5 cm aprat)complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

12322.56

-

-

... More
Providing, execution and development of vertical garden over the existing walls including fabrication and installation of aluminium/fibre frame work for fixing the planted pots as per direction at details given in the drawings complete with provision of drip irrigation system, supplying and fixing of natural air purifier ornamental plants in the suitable size plastic/fibre pots (polypropylene) potted plants, including suitable organic potting mix and other required ingredients . One year maintenance is also including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

60

-

-

... More
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of waste material and including the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Pilkhan- Ficus infectoria complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

1500

-

-

... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

120

-

-

... More
Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 Per Kilogrammecomplete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

9

-

-

... More
Providing and fixing Stainless Steel Grade - 304 door handle of size 1000mm long and 50 mm thick rod with SS screws etc .complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

13

-

-

... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.are including).complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

91.26

-

-

... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions consisting of: Ist course of applying cement slurry @ 4.4 Per Kilogramme/Per Square Metre mixed with water proofingcompound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 Per Kilogramme.per Per Square Metre of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 Per Kilogramme/Per Square Metre).complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

2230.73

-

-

... More
Providing and laying integral cement based treatment for treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Per Kilogramme per square Per running Metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square Per running Metre, including preparation of surface but excluding grading complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322

3950.85

-

-

... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

68.07

-

-

... More
Providing and fixing water closet Per Set squatting pan Viterous china orrisa type W.C. pan of 580mm Make- JAL Cat No.65510-13 / Kohler /Hindware /jaquar/Cera or Equivalent (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 Per Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Providing and fixing white vitreous china water closet Per Set (European type W.C. pan) JAL make Cat No. 65225-13/ / Kohler /Hindware /jaquar/Cera or equivalent with seat and lid, 10 Per Litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat, jet and lid. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

107

-

-

... More
Providing and fixing counter top Viterous china flat back wash basin 630x450 mm Make- JAL Cat No. 66110-13/Kohler /Hindware /jaquar/Cera or equivalent including carriage of material upto all lead and lifts and as per direction of Engineer incharge.

137

-

-

... More
Providing and fixing Sensor Urinal (exposed) ‘Hebbal’ Post Flush Make- JAL Cat No.78315/ / Kohler /Hindware /jaquar/Cera or equivalant 15 mm having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

37

-

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board510x1040 mm bowl depth 250 mm complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

18

-

-

... More
Providing and fixing Bottle Trap Make- JAL Cat No. 1861S03 / / Kohler /Hindware /jaquar/Cera or equivalent 32 mm size of approved quality & make complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

164

-

-

... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge..

149

-

-

... More
Providing and fixing mirror of superior glass JAL make Cat No. 46551 or equivalent of approved quality and of required shape and size : Rectangular shape 450x600 mm complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

139

-

-

... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., ccomplete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

112

-

-

... More
Providing and fixing toilet paper holder Make- JAL Cat No. 26546 or equivalent including all leads and lifts : C.P. brass complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

109

-

-

... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessaryplaster and pointing in cement mortar 1:4 (1 cement : 4coarse sand)complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
100mm dia

225

-

-

... More
75mm dia

75

-

-

... More
Providing and fixing of Liquid Soap Dispenser With Glass Tumbler JAL make Cat No. 37547 or equivalent brand with S.S. Screw including carriage of material upto all leads and liftcomplete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

149

-

-

... More
Providing and fixing JAL make Cat No. 36524 or equivalent stainless steel towel ring with concealed fittings arrangement complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

135

-

-

... More
Providing and fixing stainless steel towel rail JAL make Cat No. 36520 or equivalent 600 mm long with arrangement of approved quality complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

74

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- Charge. Concealed work, including cutting chases and making good the walls etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
15 mm nominal outer dia Pipes

1995

-

-

... More
20 mm nominal outer dia Pipes

672.12

-

-

... More
25 mm nominal outer dia Pipes

634.12

-

-

... More
32 mm nominal outer dia Pipes

350

-

-

... More
Providing and fixing PPR Unions ncluding carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
20mm

100

-

-

... More
25mm

100

-

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.in External work complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
40mm dia nominal bore

200

-

-

... More
50 mm dia nominal bore

110

-

-

... More
65 mm dia nominal bore

20

-

-

... More
80 mm dia nominal bore

20

-

-

... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
25 to 40 mm nominal bore

11

-

-

... More
Providing and fixing C.P. brass Short body bib cock JAL make Cat No. 9032 or equivalent of approved quality conforming to IS standards complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
15 mm nominal bore

121

-

-

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
25 mm nominal bore

16

-

-

... More
40 mm nominal bore

16

-

-

... More
50 mm nominal bore

10

-

-

... More
Providing and fixing JAL make Cat No. 444 or equivalent uplasticised PVC connection pipe with brass unions complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
15mm nominal bore

506

-

-

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge. make sintex or equivalent

40000

-

-

... More
Providing and fixing C.P. brass long nose bib cock JAL make Cat No. 9036 or equivalent of approved quality conforming to IS standards complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge..15 mm nominal bore

72

-

-

... More
Providing and fixing C.P. brass angle stop cock JAL make Cat No. 9048 or equivalent for basin mixer and geyser points of approved quality conforming to IS:8931,complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.15mm nominal bore

526

-

-

... More
Providing and fixing C.P. brass consealed stop cock approved quality conforming to IS:8931 - 15mm nominal bore complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

93

-

-

... More
Providing and fixing C.P grating JAL Make Cat No. 9336 or equivalent complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

396

-

-

... More
Providing and fixing stainless steel soap Dish Holder JAL make Cat No. 26541 or equivalent with s.s screw complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

143

-

-

... More
Construction of brick masonry manhole in cement mortar 1:4 ( 1 Cement : 4 Sand) with RCC Top slab with 1:1.5:3 ( 1 Cement : 1.5 coarse sand: 3 Coarse aggregate 20mm nominal size ) foundation concrete 1:4:8 ( 1 Cement : 4 Coarse Sand :8 Graded Stone aggregate 40mm nominal size ) Inside plastering 12 mmthick with cement mortar 1:3 ( 1 Cement : 3 Coarse Sand ) finished with a floating cost of neat cement and making channel in cement concrete 1:2:4 ( finished with a floating cost of neat cement and making channel in cement concrete complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Inside diameter 80x90 cm and 60 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 Per Kilogramme ( Weight of cover 23 Per Kilogramme and weight of frame 15Per Kilogramme)

20

-

-

... More
Inside diameter 80x90 cm and 75 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 Per Kilogramme ( Weight of cover 23 Per Kilogramme and weight of frame 15Per Kilogramme)

16

-

-

... More
Inside diameter 80x90 cm and 90 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 Per Kilogramme ( Weight of cover 23 Per Kilogramme and weight of frame 15Per Kilogramme)

12

-

-

... More
Inside diameter 80x90 cm and 105 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 Per Kilogramme ( Weight of cover 23 Per Kilogramme and weight of frame 15Per Kilogramme)

10

-

-

... More
Inside diameter 80x90 cm and 120 cm deep including CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 Per Kilogramme ( Weight of cover 23 Per Kilogramme and weight of frame 15Per Kilogramme)

6

-

-

... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with CI brating brick masonry cj\hamber with water tight CI cover with frame of 300x300mm Insde) the weight of the cover not less than 4.50Per Kilogramme frame to be not less then 2.70Per Kilogramme as per standard design ( 100x100 Size P Type with common brunt clay bricks FPS ( Non Modular) of class designation 7.5

22

-

-

... More
Making connection of drain or sewer line For pipes 100 to 250 mm diameter to septic tank/ STPwith existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Providing and fixing pillar tap JAL make Cat No. 77222 or equivalent with having water inlet, including fixing to wall with suitable brackets all as per manufacturers specification complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

86

-

-

... More
Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 75 mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including filling the joints with approved adhesive complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Finolex or equivalent

879.47

-

-

... More
Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 110 mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including filling the joints with approved adhesive complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Make Finolex or equivalent

932.47

-

-

... More
Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe 150mm diameter of working pressure not less than 4.5 Per Kilogramme per square Per running Metre (Four point five kilogramme per square Per running Metre) including all fittings & filling the joints with approved adhesive complete. complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Make Finolex or equivalent

670.5

-

-

... More
Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.Make Finolex or equivalent

-

-

-

... More
PVC plain Bend 75 mm dia.

376

-

-

... More
PVC plain Bend 110 mm dia.

360

-

-

... More
PVC Single equal branch of required degree with oval access door 75 mm dia.

93

-

-

... More
PVC Single equal branch of required degree with oval access door 110 mm dia.

89

-

-

... More
PVC COLLAR 75 mm dia

157

-

-

... More
PVC COLLAR 110 mm dia

155

-

-

... More
PVC Clamps75 mm dia

235

-

-

... More
PVC Clamps110 mm dia

203

-

-

... More
PVC Cowls 75 mm dia

153

-

-

... More
PVC Cowls 110 mm dia

132

-

-

... More
PVC Door Bend 75 mm dia.

107

-

-

... More
PVC Door Bend 110 mm dia.

94

-

-

... More
PVC Tee75 mm dia.

103

-

-

... More
PVC Tee110 mm dia.

70

-

-

... More
75mm PVC floor Trap

261

-

-

... More
110 mm Pvc floor trap

67

-

-

... More
Providing and fixing health faucet with 8mm dia,1.20m long flexible tube and wall hook including carriage of material to all leads and lifts and as per direction of Engineer incharge.JAL make or equivalent

68

-

-

... More
Providing and fixing 15 mm nominal size single lever wall Basin Mixer concelled body for single lever basin mixer including carriage of material upto all leads and lifts and as per direction of Engineer incharge jaquar .JAL/Jaquar make or equivalent .

41

-

-

... More
Providing and fixing Rob hook approved including carriage of material upto all leads and lifts and as per direction of Engineer incharge. JAL make or equivalent.

72

-

-

... More
Providing and fixing hand dryer HDRSSF-AK2807 Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

37

-

-

... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W.drain pipe 100 mm diameter and 1.20m long complete as per standard design including carriage of material upto all leads and lifts and as per direction of Engineer incharge. ..

20

-

-

... More
Providing and fixing Shower head as per Aproved size and brand including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

24

-

-

... More
Providing and fixing shower enclousres of Jaguar/ JSC- CHR-R820 W1620 L Ritz collection wall to wall enclosure with fix glass and openable door fixed with wall with 8 mm thick thoughaned glass Size with height 1950 mm width 1601-2000mmincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

24

-

-

... More
Providing and fixing FAUCET RANGE OPP-15011BPM Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses, jaquar make or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

37

-

-

... More
Providing and fixing toilet grab bars /rails for bath room 23.6 inch stainless steel flip up handicap safety grab bars for elderly seniors / disabled persons , bath tubs , showers , foldable handle grips , support for walls drop down grab bars/ hand bars on fire exits for physically disabled persons complete as per NBC Standards complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .JAL make or equivalent

12

-

-

... More
Providing and fixing stainless steel fire exit door panic bar heavy duty silver coated , brand Geze pull handle for fire doors /exit doors , door width 48 inch. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

60

-

-

... More
Providing and fixing premium toilet with disable friendly fittings , Cera / Jaguar/Jail or make or equivalent complete ( Cruse Per Set EWC 710x370x810 mm , clour snow white Cat NO S1021113,S-trap Cat No S 1021114 ,P Trap S 1021114, Cistern Cat No S1060106 , Soft cloase seat Cover Cat No B 1520118, Twin Flush fittings B1010112, Wash basins 510x400 Cat No S 2040101 , Spatula Basin MIxers Cat No F 90030451 Wall mounted Grab Bar 600mm long Cat No B 2210106 , Wall mounted hinged rail 750x100 Cat No B 2210108 Foldable Shower Chair Cat No B 2210109,Rain Shower Cat NoF 701010955 complete with all necessary fitting and fixtures complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

6

-

-

... More
Providing , installation ,testing and commissioning of Sewage Treatment Plant capacity 50 KLD of R S Technology ( MBBR Technology at site complete as per standard specifications as per direction and to the entire satisfaction of Engineer Incharge / Project Manager.including AMC for 1 years with the following specifications complete including carrriage of material upto all leads and lifts and as per direction of Engineer incharg PRaw sewage water Charterstics: arameter flow 5000 Per Litre/Day, Ph,6.5-7.5, COD 400-5-450mg/l,BOD3 @27 C mg/l250-300, TSS mg/l 100-200, Oil & Greease mg// 10-15 Treated Sewage Water Characterstics+ Ph 6.5 to 8.00 Ph 6.5 to 8.00, COD lesds than150mg/l, BOD3 @27 C Less than 30mg/l,TSS Less than 30 mg/l Oil and grease less than 5 Mg/l, Reatment Scheme Stage-1 Primery Treatment Stage-II Secondary or Biological TReatment, Stage-III Tertiary Treatment, Stage IV Sludge treatment.PROICESSING UNIT:Scvreen Per cubic Metre Oil Grease removal tap, Sewage Septoc Per cubic Metre Collection Tank, MBBR REaxctor, Bloers & Diffused Aeratiion Sysrtem, Secondary Tube Per Setter Tank, Chlorine Contact Tank, Hypio Dosing System, Pressure Sand Filter, Activated Carbon Filter, Sludge Coillection Tank,LIST OF WORKING MECHANICAL EQUIPMENTSPrimery Treatment : Basket Screen, 1 No, Coarse membrane air duffusers 1 l Lot, Air Purging Grid at Sewage Collection Tank 1 Lot,, Sewage Lift Pump 1 Nos.Secondary Treatment:Air Bloer with accessories REactor 1 No, Fine mebrane Air Diffusers 1 Lot, MBBR Media 1 Lot Tube Per Settler Media 1 Lot, Sludge withdrwal Pump 1 Nos ( Tertiary TReatment : Hypo Dosing System, Filter Feed Pump, Pressure Carbon Filter, Coarse membrane air diffuser, Air Purging Grid, at Sludge Collection Tank DETAIL OF MECHANICAL EQUIPMENTS Sewage lift Pump Per Set 1 No Capacity 10Per cubic Metre/hr Krloskar /Equivlent 1 HP.Coarse Membrane Air Diffusers - 1 Lot Capacity 5-10 Per cubic Metre/ Hr/m Having size 300mm dia TS Technology AIR Blower with Accessories 2 Nos (1W+1S) Capcity 130Per cubic Metre/h, Pressure 0.50 Per Kilogramme/ =Sqcm, Motor 3 HP Crumpton/ Kirloskar. Aeration Grid -1 Lot, MOC MSEP /GI /PVC complete with piping, valves and other accessories MBBR Reactor: -2 Nos Cylinderical type, Volume 10 Per cubic Metre Each Dia 1.5x2x3m MS Internal, External Synthetic paint of RS Technology / Equivlent.MBBR MEDIA -1 Lot, MBB Tank, Size 22mm dfia x16mmL Voidage more than 80% of Specific Gravity 0.90-0.95 Gm/ Sqcm, SP surface Area 400 Per Square Metre/Per cubic Metre, MOC , Virgin PP wioth UV Stabilizer of of RS Technology / Equivlent. Tube Per Settler 1 No Size 1.50x2.00m SWD 2.00m, Tube Per Settler Media 1 Lot, having length 750mm Sludge Withdrwal Pump -1 No Having Capcity 3 Per cubic Metre/h Head 12.00m MOC CI , 1 HP Motor HYPO Dosing Tank with Dosing punp -1 No, Located in Chlorine Tank Vertical Type, MOC HDPE Capacity 50Ltr Make Syntax Dosing pump 0-10 Iph Filter Frrd pump -1 Nos LOcation chlorine Tank, Capcity 4.00 Per cubic Metre/h Motor 3.00 HP, Pressure Sand Filter -1 Nos In Chlorine Tank size MPer cubic Metre/h , Activated Carbon Filter, 1 No Loacted after Sand filter Size 3 Per cubic Metre/h DETAIL OF EI Work MCC Control panel favricated in 14 SWG /16 SWG CRCA Siemen/ L&T, Cabing MOC Copper as per the capacity of motors , Pipes iof MS/ GI/ UPVC of Tata / Zenithetc, Pressure Gauge 1 Lot Raange 0 to 4 Per Kilogramme/ Sqcm of Wika/ H Guru/ Equivalent, Levels Per Sets LOacted in inside Tanks to indicate the Low & High Level, Power Supply, As per detail of Eqipment.including all civil work completed and including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Providing ,installation , testing and commissioning of Waves sewage treatment plant oF 5 KLD capacity having the components of the scheme :- Screen chamber ,Equalization Tank , Tube Per Settler tank , pressure sand filter , Activated carbon filter and treated water tank complete as per direction and to the entire satisfaction of the Engineer in Charge .complete .As per detail of Eqipment.including all civil work completed and including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Providing & fixing in Toilets of main entry gate make of Galaxy Cubicle nylon-11 single colour (Boilo Board 21 years Waranty) 13 No of size 1500mm x 900mm x 1995 mm and (13 Nos) of size 1200mm x 1200mm x 2400mm or as per drawing with All Accessories SS grade 304/316 & aluminium Grade 6063 T6 Alloy.Nylon Per Set box, U Channel, Door stopper, top rail, Nylon thumb turn indicator, F-channel, Corner CAP, Screws wall plugs & Noise Tape, SS Brackets. Thickness of comact laminate for unrinals of sized 12mm: Door 600mm x 1785mm Divider height for urnials ( 6 Nos) having height 1820mm, Overall height 1995 mm(including 150mm Groujnd Clearance) etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Boring / drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

180

-

-

... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 Per running Metre & upto 150 Per running Metre depth below ground level.300 mm dia complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

80

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

100

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

160

-

-

... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2.83

-

-

... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, allcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2.83

-

-

... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2.83

-

-

... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, allcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2.83

-

-

... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

4

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.100 mm nominal size dia having minimum wall thickness 5.00 mmcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

40

-

-

... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.100 mm nominal size dia complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

40

-

-

... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.Details of cost for 8 Hours complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

10

-

-

... More
Providing & installation of Submersible Water motor pump- 1 hp,heavey duty with float switch and 10Per running Metre cable (2 inch delivery,13 Per running Metre heade) in the bore well for lifting water to water storage tank make KIRLOSKAR Or equivalent , all complete, including hire as per requirement and direction of Engineer-in-charge. Water moter pumpss in the bore well for lifting water to water storage tank complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

4

-

-

... More
Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.i/c Providing & fixing of Pop-up sprinkler.,Pop up of 1/2" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-,Clamp P.P.Saddle Tee 75, 63, 40mm x 3/4",Fixing of Valves and Filtration Unit,Providing & Fixing of Automation Unit including pump Per Set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground complete as per detailed quantity & specifications given below.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (i).Supply, installation, testing & commissioning of PVC pipes IS: 4985, 10 Per Kilogramme/cm and fittings including trench excavation & re-filling with same soil 450 -300 mm deep.75mm OD- 10.0 Per Kilogramme/cm² ( 522.00 Per running Metre) 63mm OD- 10.0 Per Kilogramme/cm² (480.00Per running Metre) 40mm OD- 10.0 Per Kilogramme/cm² (1710 Per running Metre)

1

-

-

... More
Sprinklers, and Accessories: Providing & fixing of Pop-up sprinkler. Built to accommodate Lower pressure with radius of throw 25 to 20 ft. & flow of 0.76 to 9.63 USGPM at operative pressure of 1.72 to 4.48 Bar (25-65 PSI), the sprinkler shall be gear driven rotary type full & part circle (40-360 degree) in one,5'' pop-up hight,having 20mm(3/4") Female threaded inlet, Check-O-Matic maintains up to 2.8m (8'), with 12 nos. Nozzle tree for trajectory 8 nozzle for standard 25 deg. and 4 nozzle for 10 deg.The body of sprinkler is ABS plastic & non - corrodible. (TORO/Eq. Make) (160 Nos) Supply Installation, Testing & commissioning of Pop up of 1/2" inlet with Plastic Riser, Anti Drain Valve & Locking cover, Ratcheting Slip, Clutch. BSP. UV-resistent plastic Pop up Spray 2 m to 5.5 m Radius (Full/Part) (210 Nos) Supply Installation, Testing & commissioning of Swing joints (Pop up Connecting Assembly) 1/2 (380Nos) Supply Installation, Testing & commissioning of Clamp P.P.Saddle Tee 75, 63, 40mm x 3/4" (390Nos) Providing & Fixing of Valves and Filtration Unit Supply Installation, Testing & commissioning of PVC Ball Valves PN16, 63 mm Dia (15 Nos) Supply Installation, Testing & commissioning of Air Release Valve PN10 2" (3 Nos) Supply Installation, Testing & commissioning of Clamp P.P.Saddle PN10 Tee 75 X 2"(18 Nos) Supply Installation, Testing & commissioning of 10" Round Valve Box with cover (13 Nos) Supply Installation, Testing & commissioning of 12" Rectangular Valve Box with (15 Nos) cover Supply Installation, Testing & commissioning of Disc Filter 3" (50m³/hr) Amiad Isreal ( 1 Nos) Supply Installation, Testing & commissioning of Pressure Gauze (glycerine filled) (1 No) Supply Installation, Testing & commissioning of Pressure Relief valve 2" with ( 1 No) Acessories Providing & Fixing of Automation Unit

-

-

-

... More
Supply Installation, Testing & commissioning of Solenold Valve 2" BSP wlth Ilow control, manual bleed, 6 5S nuts grip into bonnet. 200 psi rated for heary duty applications, glass filled nylon body with 8 molded in brass studs, a SS metering rod and hish-erade PVC bonnet.(15 Nos) Supply Installation, Testing & commissioning of 16 Statron Turf Controller, 220 VAC 50Hz. havlng 3 independent program, 3 start time per program, scheduling options to suit the needs of plant material or to comply with watering restrictions, leap year compatible, advance water budget to Per Set water budget for each month ofthe year, 3 test cycles, programmable run times from 1 minute to 5 hours 59 minutes, poly-fuse self rePer Setting circuit protection.Rates are inclusive of control cable Interconnection with irrigation pump starter and commissioing of pump automation.( 1 Nos) Supply Installation, Testing & commissioning of #14 AWG Copper Conductor Direct Burial Single Core Cable (White) (1800 Nos) Supply Installation, Testing & commissioning of #16 AWG Copper Conductor Direct Burial Single Core Cable Red (10600 Nos) Supply Installation, Testing & commissioning of DBR/DBY series water proof wire connector with splices (34 Nos) PUMPING STATION to be installed in STP Supply Installation of a pump Per Set Sunitable to deliver 5 LPS at 58 Mtr. Head at Ground ( Nos) Supply Installation of control panel complete with single phase priventer ,MCB, star delta starter ampere & volt meter indicating lights auto start for two pumps and water ( 1 No) level controller etc. (Suitable for Indore Installation) (1W+1S) Supply Installation of Suction and Delivery Header Pipe & Fittings for (1W+1S) One Per Set Supply Installation of 4 Sq. mm 3 Copre Copper Power Cable (30.00Per running Metre) Complete as all above including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
SIGNAGES Supplying and Fixing Acrylic Signage size (300x450mm) indicating Male/Female Wahrooms, Directional, Fire Exit, Rooms,Lifts,Classrooms etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per direction and to the entire satisfaction of the Engineer-in-Charge including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

73

-

-

... More
Supplying, Fabricationg and Fixing of Acrylic Signage on featured wall including neon lights as per design and drawings complete as per direction and to the entire satisfaction of the Engineer-in-Charge including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

25.92

-

-

... More
Design, supply, fabrication and fixing of Signage board (6.00x1.20m.- 1 no.) using words made of acrylic cut out letters with LED and reflective vinyl sheet as per approved design with following specification. a) Board shall be fabricated with 3 mm thick ACP sheets of Indobond or equivalent make. Powder coated Aluminium sheet shall be fixed from the rear side of the entire board to make box section. b) Rafting Complex Matter Logo letters (Hindi and English) shall be made of Acrylic cutout letters of ACAST or equivalent make and shall be uniformly illuminated by using Digital LED light of Samsung or equivalent make. c) Powder coated Aluminum clips and brackets shall be used of minimum 3 mm thickness as per direction of Engineer-in- Charge. d) Words of other matter of the signage board shall be fixed using reflective vinyl cut out letters of MACTEC or equivalent make. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

9

-

-

... More
Providing and fixing of kangra art miniature ,heritage paintings of standard size showing pictorial art of kangra ,phari painting with wooden frame complete as per direction and to the entire satisfaction of Engineer incharge including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

45

-

-

... More
Providing and fixing Building Signage Size: Letter Height 1800mm Stainless Steel letters from front Acrylic from back, backlit, Led Osram, Driver IP68, Fixing with Hilti Fastners complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Providing and fixing ENTRY PYLON SIGNS Size: 25 ft. Height Structure MS Channel 100 x 5mm, ACP Cladding 3mm Aluminium Piping, Router Inner Cut Letters/3D Letters, with Acylic 3mm inside/Outside Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing and fixing WAY FINDING PYLON Size: Plyon Height 8 Ft Structure MS channel 35 x 5 mm, ACP cladding 3 mm outdoor grade with aluminum piping, router inner cut letters, with acrylic 3 mm inside and 10 mm on top Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Providing and fixing RECEPTION Size: 10 x 6 ft. Corian Surface engraved with resin filling Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing and fixing RECEPTION VIDEO WALL Size: 10 X 8 FT Led 2.5mm Pitch, Indoor Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing and fixing MONUMENT SIGNS Size: 12 ft. Tall, Brick/Metal with letters with top lit or hallow effect – 10 mm Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing and fixing SIGNS/DOOR PLATES Quality: Aluminum (PU Paint coated)Size: 14” x 12”Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

51

-

-

... More
Providing and fixing FLOOR DIRECTORY SIGNS Size: 6 ft. Height Brass Etching / Brass LettersMake P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

13

-

-

... More
Providing and fixing FLOOR DIRECTORY SIGNS Size: 6 ft. Height Aluminum Plate 8 mm with PU Paint Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Providing and fixing PARKING STANDING ALONE Size: A3 Size – Pole Height 4 Ft Steel pole with direct UV printing of ACP Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Providing and fixing WAYFINDING SIGNAGE FLANGE/ WALL MOUNT Size: 3 Ft Width on SidePre fabricated aluminum channel of 15 mm depth acrylic 3 mm in front Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Providing and fixing AWARENESS SIGNAGE DIGITAL INDOOR Size: 5 x 2.5 FtMS structure-led 2.5 mm pitch indoor, nova Hardware Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Providing and fixing PARKING FLAG POLES Size: 1.5 X 5 FTFixing On Existing Pole With C Clamps Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Providing and fixing PARKING MARKING Size: as per drawing / desgin Thermo reflective paint Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Providing and fixing MANDATORY SIGNAGE Size: As per NormsPre Fabricated Light Signage 4 Hrs. Backup Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Providing and fixingVINYL WRAPS Size 1mtr x 1mtr 3 mm make vinyl with HP latex printing Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

50

-

-

... More
Providing and fixing BOUNDARY WALL MESH SIGNAGE Size: 2500 SQFT Mesh 3 mm aluminum - with direct UV printing Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

50

-

-

... More
Providing and fixing POLE DIRECTION SIGNS Size: 4 x 2 ft., Pole Height 6 ft. Steel Pole with Aluminum Plates PU Paint/ Direct UV Printing Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Providing and fixing TOUCH SCREEN KIOSK Size: Touch Pannel 48"Samsung Assembled Make P.s.& Sons or Equivalent complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supplying and Fixing Acrylic Signage for disabled persons , size (350x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms ,disabled toilet , handicapped car parking and other mandatory signages etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per NBC Standards & direction complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

18

-

-

... More
Supplying and Fixing high contrast braille Acrylic Signage for disabled persons , size (450x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms ,disabled toilet , handicapped car parking and other mandatory signages etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per NBC Standards & directioncomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

18

-

-

... More
Providing and installation and commissioning of 2 number water falls and 9 Nos Bubblers in each Per Set with the following specifications.complete including all civil work and carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply ,installation ,testing and commissioning of sand filters 650mm dia Aqvastar make or equivallent top mount double in flow diffuser, gilter glass commercial sand filter, inner diameter 650mm , bed depth 295mm and filter area of 13Per cubic Metre /LPH for water fall and 9 nos foaming bubblers complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)Supply ,installation ,testing and commissioning of 6-way Multi -port valve,manual operation of required size as per drawings ,Make Aqvastar or equivallent complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)Supply ,installation ,testing and commissioning of filter media comprised of superior quality gravel and sand media for 650mm dia filter complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 job)Supply ,installation ,testing and commissioning of horizontal multistage self priming centrifugal pumping Per Set of 1.5hp ,single phase of make Aqvastar or equivallent complete in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager.

-

-

-

... More
PUMP FOR TRICKLING WATER FALL Supply ,installation,testing and commissioning of pump for trickling waterfall of imported little pump of approved quality and brand 500 watt model no HDS-5033 made in Italy( Qty. 1 Nos)FOAMING BUBBLER NOZZLE Supply ,installation ,testing and commissioning of foaming bubbler nozzles imported quality,Euorpean foaming Bubbler Nozzles stainless steel 304 grade fountain nozzle made of stainless steel 304 grade and inner part of ABS Plastic inlet size 1 inch complete as in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 9 Nos)Supply,installation,testing and commissioning of swing joint 1 inch size made of brass as per drawing,make KMC INDIA or equivallent complete as in all respects including carriage and cost of material at site of work asper direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 9Nos)Supply,installation,testing and commissioning of brass control valve 1 inch size ISI marked as per drawings complete as in all respects including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 9 Nos)FABRICATED WATER FALL CHANNEL Supply,installation,testing and commissioning of stainless steel fabricated channel for water fall size 6 inch length,12 inch breadth and height 12 inch or as per drawing made of stainless steel sheet 304 grade with argion welding complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 3 Nos)ELECTRICAL CONTROL PANNEL BOARD Supply,installation,testing and commissioning of suitable electrical pannel including making necessary connections for running the pumps with a provision of contractors,push buttons,connections strips , fuses, indicating lamps of rupited make such as L& T/Siemens/AE/Crompton/EE or equivallent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)UNDER WATER LED LIGHT (12V ,6W)Supply ,installation ,testing and commissioning of high reflected low consumption single colour under water led lights (12v,6 w),IP 68,size :-dia 70m height 100 mm high quality aluminium pressure die casting body , surface oxidated coating with heat resistant and tempered glass , high quality transparent silicon epoxy field inside the light to protect from heat and water. Make CREE USA complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 25Nos)LED LIGHT (12V,10WATT)Supply ,installation ,testing and commissioning of LED lights 12 volts ,10 watts, fallselling COB light make Phollips or equivallent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty.9 Nos)UNDER WATER LED LIGHT 24V,20WATT Supply ,installation ,testing and commissioning of under water LED Lights 24volt,20watt, high reflection , low consumption micro-processor based LED light with inbuilt heat resisyance sensor , made of stainless steel grade 316 make CREE USA complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 4 Nos)COVELIGHT Supply ,installation ,testing and commissioning of high reflection,lok consumption micro-processor based COVE light 10 watt/ per mtr. With imported ABS Channel. complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 26 Rft.)Light Stand Supply ,installation ,testing and commissioning of stainleess steel SS Grade 304 light stand provision of 3 nos. lights per stand complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 9 Nos)Power Supply,installation ,testing and commissioning of power supply (SMPS) For the required capacty (12 volt, 100 watt ) of LED Light Make :- Mean well or equivalent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 3 Nos)Supply ,installation ,testing and commissioning of power supply (SMPS) For the required capacty (24 volt, 100 watt ) of LED Light Make :- Mean well or equivalent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Nos)CABLE FOR LIGHT Supply ,installation ,testing and commissioning of cable for light 1.5mm , 2 core cable ISI Marked with conduit pipe .Make :- KEI INDIA or Equivalent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager ( Qty. 200Mtr)CABLE FOR PUMP Supply ,installation ,testing and commissioning of Cable for pump 2.5mm , 3 core cable ISI marked conduit pipe make KEI INDIA complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 20 mtr)BALL VALVES Supply ,installation ,testing and commissioning of PVC ball valves 63mm make Aqvastar or equivalent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 3Nos)NON RETURN VALVES Supply ,installation ,testing and commissioning of PVC non return valves 63mm make Aqvastar or equivalent complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge/Project manager( Qty. 2 Nos)MAIN DRAIN Supply ,installation ,testing and commissioning of ABS main drain as per design and drawing complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 2 Nos)PLUMBING WORK Supply,installation,testing and commissioning of plumbing material in PVC pipe, of required size 6 Per Kilogramme/10 Per Kilogramme/sqcm ISI marked complete with all accessories like Tee,bend,reducer,socket,solvent etc.Make Finolex/ Supreme or eqivalent as per drawing complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager( Qty. 1 Lot) ALL Items Above are components of the Complete Job.

-

-

-

... More
Providing and installation and commissioning of Swimming Pool Filtration System Main Pool Size : Length 40Ft x Width 20Ft x Depth 4 Ft Main Pool Water Capacity: 89600 Ltr Children Pool Size A : Length 20Ft x Weidth 10ft X Depth 2 Ft Children Pool A Water Capacity-: 11200/- Ltr Balancing Tank Size: 12 ftx 10ft x 4ft Balancing Tank Capacity: 10000 Total Water: 110800 Approx. Filteration Time: 2 hrs. Filter Size: 900 MM, Qty- 2 Nos Filter Size: 650 MM, Qty- 1 Nos with the following specifications including civil and other Electrical work, designing and executing at site as per the direction of Engineer in Chargecomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(SAND FILTERS 900 mm DIA Make Aqvastar Singapore ) 2 Nos Supply of Side mount double inflow diffuser, gilter glasscommercial sand filter with manual 6 way multiportvalves inner dia 900 mm dia, bed depth 440 mm, Valve size 63mm for flow of 30 Per cubic Metre/hr and filter area of 0.64Per Square Metret complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. MULTI-PORT VALVE Make Aqvastar Singapore 6 way Multi-port valve, manual operation, Qty 2 Nos)

1

-

-

... More
FILTER MEDIA Gravel and sand media for 900 mm dia filter.( Qty 2 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Seteach of capacity 30 Per cubic Metre/hr of 3.0 HP, Three Phase , ofMake Aqvastar Singapore with prefilter, glass filledthermoplastic protection & automatic rePer Set A.C. electricsupply complete with enclosed fan cooled motor, barrelunion 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank &supply to treatment plant. complete in all resp ( Qty 2 Nos) SAND FILTERS 650 mm Dia Aqvastar Supply of Top mount double inflow diffuser, gilter glass commercial sand filter, inner dia 650 mm dia,bed depth 295 mm and filter area of 12 Per cubic Metre / LPH of Make Aqvastar ( Qty 1 Mtr) filter media Gravel and sand media for 650 mm dia filter ( Qty 1 Nos).MULTI-PORT VALVE, Aqvastar 6 way Multi-port valve, manual operation, Make Aqvastar *( Qty. 1 Nos)SELF PRIMING 1.5 HP PUMP Supply of Horizontal multistage self priming centrifugal pumping Per Set of 1.5HP, Single Phase, of Make Aqvastar ( Qty. 1 Nos)SWIMMING POOL S.S. 304 LADDERS Swimming pool ladders in S.S. 304 having antiskid design (Imported) 4 Step with anchor & complete accessories as required.( Qty. 2 Nos)Swimming pool ladders in S.S. 304 having antiskid design(Imported) 2 Step with anchor & complete accessories as required.( Qty. 2 Nos)RETURN INLETS Supply of Each floor inlet shall be made from unalterable ABS UV resistant with 2" side connection and shall be distributed evenly on the bottom floor of the pool. Each floor inlet shall have a maximum discharge capacity of 14m3/hr with a facility to regulate the flow through each inlet. The outlet flow through each floor inlet shall be radial instead of vertical. These floor inlets shall be fixed on the bottom pipe and shall distribute the filtered water back to the pool.( Qty. 30 Nos)CONTROL PANEL BOARD Supply of Suitable electrical panel including making necessary connections for running the following pumps with a provision of contractors, push buttons, connection strips, fuses, indicating lamps of reputed make such as L&T/Siemens/AE/Crompton/E.E or equivalent makecomplete in all respects.( Qty. 1 Nos) 3 HP Pumps 2 Nos. 1.5 HP Pumps 1 Nos. SMPS Provision 3 Nos OVERFLOW ABS GRATING MAKE CWG Supply of Overflow grating in ABS 12" in white colour flexible suitable for all straight & curved pools.( Qty. 50 Mtr) ABS MAIN DRAIN Supply of ABS main drain/Grating/ Jali made of ABS on pool side and required no. Of holes complete in all respect.( Qty. 5 Nos)PVC PIPE & ACCESSORIES All the pipes and fittings For main pool are PVCu. These pipes are designed to handle a pressure of 10 bar and the fittings are capable of handling a pressure of 6 Per Kilogramme/cm2 . These all are high rated to handle burst pressures even though the system works at 2.5 bar.( Qty. 1Per Set)UNDERWATER LED LIGHT FOR SWIMMING POOL Underwater 24V, 20 Watt, High reflection, low consumption miro-processor based LED light with, made of Stainless steel Grade SS-316 with heat resistance sensor in built. Complete in all respect. Make Cree USA( Qty. 16 Nos) POWER SUPPLY Power Supply ( SMPS) for the requried capacity (24V 150W) ( Qty. 3 Nos)CABLE FOR LIGHT 1.5 mm 2 core cable ISI mark with PVC Pipe. Make - KEI.( Qty. 300 Mtr)CABLE FOR Pump 2.5 mm 3 core cable ISI mark with PVC Pipe. Make - KEI ( Qty. 20 Mtr)BUTTERFLY VALVE 90 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat( Qty. 4 Nos)i 63 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat ( Qty. 2 Nos)NON RETURN VALVES 90 mm PVC Non return Valve MAKE PIMTAS ITALY( Qty. 2 Nos) 63 mm PVC Non return Valve MAKE PIMTAS ITALY( Qty. 2 Nos)NSTALLATION,TESTING AND COMMISSIONING CHARGES( Qty. 1 Job)CIVIL WORK CONSULTANCY CHARGES( Qty. 1 Job)FREIGHT CHARGES ( Qty. 1 Job)ALL Items Above are components of the Complete Job

-

-

-

... More
VERTICAL JET FOUNTAIN AT WILLNESS CENTER NADAUN HP SAND FILTERS 900 mm DIA Make Aqvastar Singapore )Supply of Side mount double inflow diffuser, gilter glass commercial sand filter with manual 6 way multiport valves innerdia 900 mm dia, bed depth 440 mm, Valve size 63mm for flow of 32.2 Per cubic Metre/hr and filter area of 0.64 Per Square Metret( Qty. 3 Nos)MULTI-PORT VALVE Make Aqvastar Singapore 6 way Multi-port valve, manual operation,( Qty. 3 Nos)FILTER MEDIA Gravel and sand media for 900 mm dia filter.( Qty.3 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Set each of capacity 35.8 Per cubic Metre/hr of 3.0 HP, Three Phase , of Make Aqvastar Singapore with prefilter, glass filled thermoplastic protection & automatic rePer Set A.C. electric supply complete with enclosed fan cooled motor, barrel union 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank & supply to treatment plant. complete in all respect.( Qty. 5 Nos)VERTICAL JET NOZZLE Heavy duty Brass Vertical Jet Nozzle nical plated inlet size 1".( Qty. 50 Nos)SWING JOINT Swing Joint 1"Size Brass Made complete in all respect Make KMC INDIA( Qty.50 Nos) CONTROL VALVE Brass Control valve 1” ISI Mark ( Qty.50 Nos) SERVICE SHADDLE HDPE + BRASS SERVICE SHADDLE 63MM X 32MM ( Qty.50 Nos)STAINLESS STEEL NIPPLE SS-304 STAINLESS STEEL NIPPLE (1" X 6")( Qty.100 Nos) SELF PRIMING 3HP PUMP Make Aqvastar Singapore Horizontal multistage self priming centrifugal pumping Per Set each of capacity 35.8 Per cubic Metre/hr of 3.0 HP, Three Phase , of Make Aqvastar Singapore with prefilter, glass filled thermoplastic protection & automatic rePer Set A.C. electric supply complete with enclosed fan cooled motor, barrel union 63 mm, suction stainers & necessary valves complete for drawing water from raw water tank & supply to treatment plant. complete in all respect.( Qty.5 Nos)CONTROL PANEL BOARD Supply of Suitable electrical panel including making necessary connections for running the following pumps with a provision of contractors, push buttons, connection strips, fuses, indicating lamps of reputed make such as L&T/Siemens/AE/Crompton/E.E. or equivalent make complete in all respects.( Qty.1 Nos)3 HP Pumps 5 Nos.SMPS Provision 20 Nos. CENTREHOLE LED LIGHT 12V 18W (WARM WHITE) High Reflected Low Consumption single Color Microprocessor based Under Water Centrehole LED Lights 12 V, 18 Watt , IP 68, Size :- dia 100 m, height 100 mm High Quality Aluminum pressure die casting Body, surface oxidated coating with heat resistant and tempered Glass, High quality transparent silicon Epoxy filled inside the Light to protect from heat & Water.( Qty.50 Nos)POWER SUPPLY Power Supply ( SMPS) for the requried capacity (12V 100 W) of LED Light . Make Mean well( Qty.20 Nos)CABLE FOR LIGHT 1.5 mm 2 core cable ISI mark with conduit pipe. Make - KEI INDIA( Qty.500 Mtr)CABLE FOR LIGHT 2.5 mm 2 core cable ISI mark with conduit pipe. Make - KEI INDIA( Qty.50 mtr)BUTTERFLY VALVES 90 mm PVC Butterfly Valve with Flange & Nut bolt Make Automat( Qty.12 Nos)NON RETURN VALVES 63 mm PVC Non return Valve MAKE AQVASTAR( Qty.5 Nos) MAIN DRAIN ABS main drain inlet size 2"( Qty.6 Nos) OMPLETE PLUMBING WORK Complete plumbing material in PVC pipe 10 Per Kilogramme cm2 ISI mark complete with all required accessories TEE, bend, reducer, socket, solvent etc Make Supreme( Qty.1 Lot).PUMP AND FILTER UNION Imported Pump and Filter union 63 mm size.( Qty.20 Nos) CIVIL WORK CONSULTANCY CHARGES ( Qty.1 job) INSTALLATION,TESTING & COMMISSIONING CHARGES( Qty.1 job)FREIGHT CHARGES( Qty.1 job)ALL Items Above are components of the Complete Job

1

-

-

... More
FOUNTAIN WATER PLAZA 9 MTR DIA SEQUENCING STRAIGHT JET WATER BODY - 9 MTR DIA (Water Park)Designing supply installation & testing & Commissioning of Fountain water plaza 9 Mtr. dia sequencing straight jet fountain produce aerated water with pumps & Led luminaries complete in all respect Height of water effect approx 2 Mtr complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. straight jet nozzles - High end Nozzles are made of Brass- nickel/Chrome plated with measured flow approx 45 lpm .(Paai/Rainbow/AIS/Vinayak)( Qty.40Nos)Ball joint for perfect adjustment( Qty.40Nos)Hydraulic system -complete hydraulic system along with manifold & other accessories to get desired outcoome from water feature( Qty.40Nos)control valves to adjust flow pressure of water (various sizes) Gate valves operate by lowering or raising the wedge-shaped disc or gate, which either permits or blocks the fluid flow. (zoloto/NMC/equiv)( Qty.40Nos)0.5 HP openwell monosumbersible pumpPer Set with all fittings (Kirloskar/Crompton/Equiv)( Qty.40Nos)2.5 Per Square Metrem 3 core - copper submersible cable flat Keep fire hazards at bay while ensuring safety and reliability with Flat submersible cables Flexible cables are safe, reliable, fire retardant, fire resistant, lead free, non-toxic cable that is eco-friendly. These cables are flexible to be installed in different locations and offer protection under any cirPer cubic Metrestances. Applications like pumps, motors and various others run perfectly . protection to the entire circuit, appliances and their users, the submersible cables are one of the sturdiest inventions to get your electrical products running smoothly. (For sumbersible pumpPer Sets) havells/Kei/Polycab/Equiv( Qty.200Mtr)2.5 Per Square Metrem 5 core - Copper Control Cables; Size of Conductor: 2.5 sq mm; Core: 5 Core; Conductor Material: Copper (For Lumianries). Make : Polycab/Havells/KEI/Eqv( Qty.200Mtr)RGBW LED lights (not less than 36 W) The housing, top cover and bracket are all in polished stainless steel, fasteners are also stainless steel, Design is extremely compact, Special measures have been taken for protection of components and sealing, totally protected against ingress of water - IP 68 ligght body stainless steel 304 grade ,power LED make edisson/bridgelux 3 watt each,light top diameter 130 mm thicness 3.5 mm toughened glass diameter 93 mm thicness 5 mm waterproof LED light 36 watt (CDT make)( Qty.45Nos)Other fittings & accessories such as cable ties, eflon ,Tapes , connectiong materail , water proof jointing arrangements etc complete in all respect( Qty.1Per Set)Panel comprises of motor main switch,contactors, overload relays, switch fuses, light sequencer, push button on off switches, indicating lamps etc. complete with internal wiring. Lighting system shall be connected by a separate switch and fuse but shall not be energized unless pump is first switched with RGBW Led luminaries control system on.(L&T/BCH/C&S/Equiv) preprogrammed to get aesthetic water feature patterns( Qty.1Nos)ALL Items Above are components of the Complete Job

1

-

-

... More
SPIDER SLIDE: Providing , Installation, testing and commissioning of multilane mat slide which descends through high speed intertwining enclosed tubes into a surprise drop . With following operating parameters Design standard :- vehical :-Mat (1-person), Through put (persons)/hrs 120/lane. Dimensions :- 4 unit height 15.00 M, Components 32 inch spider slide Tunnel -R1(63Per running Metre) multile racer single lane -R1 (68Per running Metre . The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect aincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. /Consultant ( A Per Set of 4 Nos)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval.

1

-

-

... More
23" MULTI RACER SLIDE: Providing and Installation, testing and commissioning of Mat racing slide with a downhill slope wherein the riders in each lane can race with each other sliding head first. (Manufacturing process: RTM) Design standard :- Vehicle Mat (1 person) Throughput (persons/hr) 120/lane Unit nos Qty 2 Ht (m) 3.0 MULTI RACER SINGLE LANE-R1 (21 Per running Metre) The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge/ Consultant.( A Per Set of 2 Nos)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
32" OPEN BODY SLIDE:Providing and Installation, testing and commissioning of open body slide has been perfected to create thrill with various twists and turns. (Manufacturing process: RTM) OPERATING PARAMETERS:Design standard :- Vehicle Body (1 person) Throughput (persons/hr) 120-150 Qty 49 metres Ht(m) 9.0 metres. The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant.complete including carriage of material upto all leads and lifts Length 49 metres. ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
32" CLOSED BODY SLIDE:Providing , Installation, testing and commissioning of This closed body slide has been perfected to create thrill with various twists and turns. (Manufacturing process: RTM) Design standard :-Vehicle Body (1 person) Throughput (persons/hr) 120-150 Qty 50 Per running Metre, Ht(m) 9.0 Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge.A Per Set of 50.00 Per running Metre) The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of six to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant.( A Per Set of 50 metres )complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS BOP GALVANISED STEEL:Providing , Installation, testing and commissioning of Spray Slides. Spray height 03 Mtr. Ht. Design standard :- Vehicle Body NA Throughput NA Qty1 Ht(m) NAThe water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications , ForTots BOP galvanised steel shall confirm to the standard specifications . The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant .complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent). Shop drawing to be provided by contractor for approval.

1

-

-

... More
96" FAMILY RIDE: Providing and Installation, testing and commissioning of a high thrill Slide. (Manufacturing process: Hand Layup) Design standard :- Vehicle Body 3-4 seater (body) Throughput (persons/hr) 150-250 Qty19 mtr. Ht(m) 3.0 The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant .( A Per Set of 19 metres)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
LAZY RIVER MECHANISM (415 V):Providing, Installation, testing and commissioning of a water mass with shallow pool that flows just like a natural river. Consist of Mechanism per stn, 415 VOLTS@ 50 Hz with FRP ducting, GI flapper box. The quantity mentioned in the table below represents the no. of pumps station. Design standard :- Vehicle Body 1-2 seater float Throughput (persons/hr) As per design capacity Qty of RIVER PROPULSION 19 No, Ht(m) NA The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant.( qty :- Job as per drawing)complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
RAIN DANCE- JUNGLE THEME: Providing, Installation, testing and commissioning of Themed rain dance creates an entertaining platform with dance to the latest music hits while being drenched in Design standard NA Vehicle Body Throughput (persons/hr) 70-80 Qty1 Ht(m) NA . Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge The item includes all support/ erection , civil works, Flooring including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge/ Consultant.( qty :- Job as per drawing) complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) . Shop drawing to be provided by contractor for approval.

1

-

-

... More
50 HP WAVE POOL MECHANISM (415 V):Providing , Installation, testing and commissioning of 50 HP wave pool mechanism 415 volts , for generating waves into waterbody. Consist of 50 HP, 415 volts@ 50 Hz with FRP ducting, GI flapper box & axillary Design standard NA Vehicle 1-2 seater body/float Throughput (persons/hr) As per design capacity Qty1 Ht(m) NA . The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS WHEEL (DOUBLE) SS DOM: Providing , Installation, testing and commissioning of Spray Slides are water elements .3.8 Mtr. Ht. Design standard :- Vehicle NAThroughput (persons/hr) NA Qty1 Ht(m) NA . Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant .The item includes all support/ erection , civil works, painting including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS GIRAFFE-1 GALVANIZED STEEL:Providing , Installation, testing and commissioningSpray Slides / Tots Giraffe -1 Galvanized steel , the spray slides.3.1 Mtr. Ht.Design standard :- Vehicle & Throughput (persons/hr)not applicable complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge..The item includes all support/ erection , civil works including painting including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent )Shop drawing to be provided by contractor for approval.

1

-

-

... More
MUSHROOM UMBERELLA (2.1 m) GALVANISED STEEL:Providing , Installation, testing and commissioning of Mushroom Umberella as per shop drawing provided by the vendor . 3.36 Mtr. Ht. Design standard :-Vehicle &Throughput (persons/hr)not applicable complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge.The item includes all support/ erection , civil works including painting including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ).Shop drawing to be provided by contractor for approval.

1

-

-

... More
RAINBOW TUNNEL SS DOM:Providing , Installation, testing and commissionin of a Per Set of four , Rainbow Tunnel stainless steel grade 304 dom / Spray Slides.2 Mtr. Ht. Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete .The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) .(A Per Set of 4 Nos). Shop drawing to be provided by contractor for approval.

1

-

-

... More
TILTING CONES GALVANIZED STEEL:Providing, Installation, testing and commissioning of Tilting cones galvanized steel / Spray Slides. Consists of 4 cone. 3.63 Mtr.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete .The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS ROUND SS DOM:Providing , Installation, testing and commissioning of Tots Round SS dom / Spray Slides. 2.87 Mtr. Ht.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS KINK SS DOM:Providing and Installation, testing and commissioning of Tots kink SS dom / Spray Slides . 2.68 Mtr. Ht.Design standard with operation parameters :- Vehicle & through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval.

1

-

-

... More
TOTS BUTTERFLY SS DOM :Providing , Installation, testing and commissioning of Tots Butterfly SS dom / Spray Slides .2 Mtr. Ht.Design standard with operation parameters :- Vehicle &through put (persons/hr)not applicable complete.The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval.

1

-

-

... More
Customized WAPS with Theme: Providing, Installation, Testing and Commissioning of customized WAPS with following items 1 Arching I Down Jets (9 jets) 2 Bubbler Jets 4 No 3 Hose Jets 11 No 4 Arching Jets (9 jets) 6 (54) 5 Net Bridge 3 No. 6 Net Climb 2 No 7 Peacock Arching Jets (9 jets) 8 Peacock Hose Jets (5 hoses) 9 Pipe Falls 2 No 10 Pull Ropes 4 No 11 Single Runnel 1 No 12 Colander 1 No 13 Spinning Tray 1 14 Tipping Bucket (1600L) 1 No 15 Tipping Cone 7 No 16 Umbrella Jets 1 No 17 Water Curtain 2 No 18 Water Guns 10 No 19 Water Slides 4 No 20 WaterWheel 2 No Total Play Features 62 Total Features Including Jets 132. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant complete including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ) Shop drawing to be provided by contractor for approval.

1

-

-

... More
Kids fun K2:Providing ,Installation, testing and commissioning of KIDS FUN k2 as per shop drawing to be provided by the vandor :- Design standard :- Ht(m) 3.0. The water slides shall confirm to the following specifications :- The FRP slide sections shall be moulded of ultraviolet stabilized with linear low density fibre glass with a wall thickness of 6 to 8 mm .The first layer shall be pigmented gel coating . The entire process shall be LRTM process wherein the gel coat is sprayed , the gel coating and resin used shall be of reputed brands ,the modules for slides are produced using series of activities as under :- The 1 st. top coat shall be 800 Micron of pigmented gel coat , 2nd ,3 rd , 4 th. layer shall be combination fibre mats of 1080 GSM , 5 th. , 6 th. layer shall be 300 GSM fibre mats , 7 th. ,8 th. , 9 th. layer shall be combination of fibremats 1080 GSM , 10 th. top layer shall be pigmented gel coat of 800 micron and all the fibre reinforced plastic material shall be processed by the machine laid wherein processed as follow :- After mould process a gel coating shall be given to give the require colour / shade as per manufacturer's specifications. The item includes all support/ erection , civil works including painting etc. Complete in all respect as per direction and to the entire satisfaction of Engineer-in- Charge / Consultant including carriage of material upto all leads and lifts . ( Make :- White water,Arihant , AParc or equivalent ). Shop drawing to be provided by contractor for approval.

1

-

-

... More
WIRING IN PVC CONDUIT WITH MODULAR SWITCH & SOCKETS, FANS & FITTINGS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
Group A

199

-

-

... More
Group C

56

-

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

134

-

-

... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

3550

-

-

... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

1975

-

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

3400

-

-

... More
4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire

1175

-

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2145

-

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1600

-

-

... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire

855

-

-

... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire

750

-

-

... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire

225

-

-

... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire

150

-

-

... More
4 X 25 sq. mm + 2 X 6 sq. mm earth wire

435

-

-

... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
1 Pair

200

-

-

... More
2 Pair

50

-

-

... More
4 Pair

100

-

-

... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

1300

-

-

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as requiredcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
20 mm

1600

-

-

... More
25 mm

450

-

-

... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
5/6 amps switch

471

-

-

... More
15/16 A switch

204

-

-

... More
3 pin 5/6 A socket outlet

321

-

-

... More
6 pin 15/16 A socket outlet

134

-

-

... More
Telephone socket outlet

13

-

-

... More
TV antenna socket outle

70

-

-

... More
Bell push

3

-

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

98

-

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

20

-

-

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
1 or 2 Module (75mmX75mm

8

-

-

... More
3 Module (100mmX75mm)

320

-

-

... More
4 Module (125mmX75mm)

5

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

58

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

59

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 amps modular socket outlet and 1 no 5/6 amps modular switch, connection etc. as required. (For UPS Computer Point) complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

16

-

-

... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

2

-

-

... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
Group C

297

-

-

... More
Supplying,installation,testing and commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.6 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(Polycab,havells make or as approved by Engineer incharge. )

21

-

-

... More
Supply, Installation, Testing and commissioning of 30 A Sensor Based Electronic Key Tag Switch Switch complete with all materials like Modular boxes, RIFD Card Reader etc termination of all the incommings ckts etc as per site requirementcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

24

-

-

... More
Supply, Installation, Testing and commissioning of GI raceways made of pre_x0002_galvanished sheet with thickness of 1.6mm for distributing LV and ELV cabling in screed floors installations. Can be combined with junction boxes, backboxes (floorboxes) for wiring devices, fixing and coupler accessories. Consist of body & cover. Cover fitted on to the body with screws & can be opened easily if required. Protection level should be IP 20 & IK 08. Standard length should be 2.44 mtrs. Confirms to standard EN 60-670, EN 50 085 - 2 - 2 & IEC 61534-22.(Race ways should be supplied with complete accessories i.e. fixing brackets & couplers for joining raceways from the same manufacturer.) Junction boxes for direct acess to cables at the intersection of raceways. Supply completely with base and cover plate (Lid) with height adjustable feature from 65mm to 90 mm. Confirms to standard EN 60-670,EN 50 085 - 2 - 2 & IEC 61534-22. Junction box with fly over for direct acess to cables at the intersection of floor raceways while maintaining perfect separation and 90 degree cross overs between data and power cables.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
300 x 38 mm raceways, 1.6 mm thick 1 compartment Coupler for joining raceways Coupling 38 Fixing bracket for 300* 38 ,

10

-

-

... More
150 x 38 mm raceways, 1.6 mm thick -1 compartment Coupler for joining raceways Coupling 38 Fixing bracket for 150* 38 ,

5

-

-

... More
100 mm x 38 mm(GI) raceways, 1.6 mm thick 2 compartment

5

-

-

... More
Coupler for joining raceways Coupling 38 Fixing bracket for100 mm x 38 75 mm x 38 mm(GI) raceways, 1.6 mm thick 2 compartment Coupler for joining raceways Coupling 38 Fixing bracket for 75 mm x 38

5

-

-

... More
50 mm x 38 mm(GI) raceways, 1.6 mm thick 2 compartment Coupler for joining raceways Coupling 38 Fixing bracket for 50 mm x 38

5

-

-

... More
Supplying and fixing 4 way G.I. Finish, Powder coated, MS junction boxes with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits as detailed in above item. The top cover shall be fixed with counter sunk screws. (For floor trenches).complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
300x300x60mm

2

-

-

... More
150x150x60mm

2

-

-

... More
100x100x60mm

2

-

-

... More
75 mm x 75 mm x 60mm

2

-

-

... More
50 mm x 50 mm x 60mm

2

-

-

... More
Supplying and fixing Vertical Access Boxesr boxes suitable for Raceways including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
300 mm x 200 mm x 60mm

2

-

-

... More
150 mm x 150 mm x 60mm

2

-

-

... More
100 mm x 100 mm x 60mm

2

-

-

... More
75 mm x 75 mm x 60mm

2

-

-

... More
50 mm x 50 mm x 60mm

2

-

-

... More
Supplying & fixing DLP U - PVC trunking of following size on the surface / ceiling i/c acessories (Covers, bends, Internal Corner, External Corner, Tee, Flat Angle, Joints & End caps) and straight flexible cover and seperator partition etc complete as reqd.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
50 mm wide X 50 mm deep (1 Compartment)

70

-

-

... More
100 mm wide X 50 mm deep (2 Compartments)

35

-

-

... More
Supply and Laying of 3 core 2.5 Per Square Metrem Flexible Cable from DB to 10/16 Amp Socket Outlets or MCB's or Industrial Sockets (for main & looping but without sockets / MCB's) in existing laid raceways , PVC pipes, or cable trays.[ for raw power, ups and server sockets ]complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

100

-

-

... More
Supply installation testing & commissioning of Pop-Up Box for accessing Power/Data/Voice on the computer tables including wiring etc. all complete as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Supply installation testing & commissioning of Power, USB & Data Sockets for the above Pop-up Boxes etc. complete as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.USB Module (1 Module) RJ 45 Socket (1 Module) Telephone socket outlet RJ 11 6 A Power Socket -2 nos (2 Module Each) 6A Switch (1 Module) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

5

-

-

... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

400

-

-

... More
WIRING IN PVC CONDUIT WITH HOSPITALITY RANGE MODULAR SWITCH & SOCKETS (For Wellness Building) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
Group C

269

-

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

163

-

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

46

-

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

20

-

-

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as requiredcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
1 or 2 Module (75mmX75mm

49

-

-

... More
3 Module (100mmX75mm)

494

-

-

... More
4 Module (125mmX75mm)

5

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

101

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

182

-

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos 3 pin 5/6 amps modular socket outlet and 1 no 5/6 amps modular switch, connection etc. as required. (For UPS Computer Point) complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

83

-

-

... More
Supplying and fixing call Hospitality Range bell/ buzzer suitable for single phase, 230 V, complete as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

33

-

-

... More
Supply, Installation, Testing and commissioning of 30 A Key Electronic Tag With Time Delay ,Modular desing for installation in any module plate designed to take in magnetic door lock cards, complete with all materials like Modular boxes , termination of all the incommings ckts etc as per site requirementcomplete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

33

-

-

... More
SITC of Electronic Door Lock System with Sofware and Visitor Management System complete with encoder etc as per site requirement. Item shall also include supply of 80 FIFD cards .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. make as approved by Engineer incharge. )

1

-

-

... More
Supply, Installation, Testing and commissioning of Do Not Distrub Box with Bell push, top plate to indicate Do Not Distrub and Make My Room, indicator switch box (internal & external module) complete as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. make as approved by Engineer incharge. )

33

-

-

... More
Supply, Installation, Testing and commissioning of skriting light with white LED 3Mtr complete as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. make as approved by Engineer incharge.

33

-

-

... More
Supply, Installation, Testing and Commissioning of Cat 6A, Hospitality Range Information Outlet (2M with shutter) , UL Listed, Color Blue/grey/white/other (I/O) for Data, Voice, CCTV & Wi-Fi on the existing modular plate & switch box including connections but excluding modular plate etc. as required (for user end).complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. make as approved by Engineer incharge.

66

-

-

... More
Supply, Installation, Testing and Commissioning of , Hospitality Range USB Charger 1500 mA Type 1 Module on the existing modular plate & switch box including connections but excluding modular plate etc. as required (for user end).complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. MCCB, MCB & DB’S MCCBs (Polycab,havells make or as approved by Engineer incharge. )

33

-

-

... More
Providing and fixing following rating and breaking capacity 4 Pole MCCB in existing cubicle with thermal magnetic release VTPDB panel board including drilling holes in cubicle panel, making connections, etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
100 Amp, 16 KA, 4P MCCB

5

-

-

... More
160 Amp, 16 KA, 4P MCCB

1

-

-

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
8 way , Double door

58

-

-

... More
12 way , Double door

5

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
4 way (4 + 12), Double door

10

-

-

... More
8 way (4 + 12), Double door

1

-

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
4 way (4 + 12), Double door

2

-

-

... More
8 way (4 + 24), Double door

2

-

-

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
Single pole

588

-

-

... More
Triple Pole

14

-

-

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

60

-

-

... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
40 A

60

-

-

... More
60 A

2

-

-

... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
40 A

24

-

-

... More
63 A

8

-

-

... More
100 A

3

-

-

... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
25 A

57

-

-

... More
40 A

18

-

-

... More
63 A

3

-

-

... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Polycab,havells make or as approved by Engineer incharge. )

64

-

-

... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (For Kitchen & Laundry)complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

7

-

-

... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.(For Kitchen & Laundry)complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

12

-

-

... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
For 8 way, Double door SPN MCBDB

58

-

-

... More
For 12 way, Double door SPN MCBDB

5

-

-

... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
For 4 way, Double door TPN MCBDB

10

-

-

... More
For 8 way, Double door TPN MCBDB

3

-

-

... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

4

-

-

... More
Supplying, installation, testing and commissioning of recess mounting, TPN TIER Per Phase Isolation/7 Segment , 415 volts, prewired, distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 100 Amps tinned copper insulated bus bar, common neutral link, earth bar, din bar for mounting MCBs, detachable gland/knock out plate and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of PVC insulated copper conductor up to the terminal connector/neutral link and ready for installation of following ways complete with connections, testing and commissioning etc. as required. DB shall be designed with provision for 8 module as incomer, 2 module as subincomer & SP MCBs as outgoing as per requirement. Inside each DB, a DB chart is to be fixed indicating all out going circuits.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
8 + 2 way (MCCB+6+36 Module), Double door Distribution Board

1

-

-

... More
8 + 2 way (8+6+36 Module), Double door Distribution Board

10

-

-

... More
4 + 2 way (8+6+12 Module), Double door Distribution Board

13

-

-

... More
Supplying and fixing Cable End Box (Loose wire box) suitable for PPI triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Polycab,havells make or as approved by Engineer incharge. )

-

-

-

... More
8 + 2 way (MCCB+6+36 Module), Double door Distribution Board

1

-

-

... More
8 + 2 way (8+6+36 Module), Double door Distribution Board

10

-

-

... More
4 + 2 way (8+6+18 Module), Double door Distribution Board

13

-

-

... More
FAN AND FITTINGS Supply, Installation, Testing and Commissioing of Recessed/ Surface Mounted downlighter with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: of following wattage & having system lumen output with system lumen efficacy of 120 lm/W, Colour temperature of 4000 K, Neutral white, CRI 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, , Electronic control gear,Protection class II, IP 40, including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

-

-

-

... More
15 W

687

-

-

... More
5 W

459

-

-

... More
Supply, Installation, Testing and Commissioing of Surface Mounted downlighter with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: of following wattage & having system lumen output with system lumen efficacy of 120 lm/W, Colour temperature of 4000 K, Neutral white, CRI 80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, , Electronic control gear,Protection class II, IP 40, including making suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

-

-

-

... More
15 W

27

-

-

... More
Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

-

-

-

... More
1200 mm sweep

137

-

-

... More
1400 mm sweep

9

-

-

... More
Supplying, Installation, Testing & Commissioning of bathroom mirror light integrated 7 W LED water proof wall fixture IP 44 suitable for 230 V single phase AC supply including making suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

87

-

-

... More
Supplying, Installation, Testing & Commissioning of 250 mm sweep fresh air ventilating fan with aerodynamically designed & balanced bladessuitable for operation on 230 v single phase AC supply complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd.with all accessories as required .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

55

-

-

... More
Supplying, Installation, Testing & Commissioning of 300 mm sweep, 1400 rpm heavy duty exhaust fans with suitable louvers / bird screen protection and all accessories complete with Aerodynamically designed & Balanced Blade, Dynamically balanced impellers for smooth & vibration-free operation,Pre-lubricated double ball bearing for maintenance free running suitable for operation on single phase AC supply complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required as reqd..complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

14

-

-

... More
Supply ,installation ,testing and commissioning of high reflection, COVE LED light 10 watt/ per mtr. With cove light profile with diffusor ABS Channel. complete in all respect including carriage and cost of material at site of work.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

300

-

-

... More
Supplying, installation, testing and commissioning of Surface/ Recess mounted LED fitting (600 mm x600 mm) made out of CRCA powder coated body having with following specification. (i) Waltage - 36 watt (ii) having system lumen output of 4080 lumens with system lumen efficacy of 120 lm/W (iii) Colour Temperature - 4000 k to 6500 k (iv) CRI (RA) - ≥ 80 (v) System lumens efficiency - ≥ 100 (vi) Life - L70B 50 @ 50000 burning hours (vii) Mandatory test report - LM-79, LM-80 .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Make Havells,wipro,philips or as approved by Engineer incharge.

69

-

-

... More
CHANDELIERS Supply, Lobby Chandelierinstallation, testing & Commissioning of Main Chandelier of the following specifications Overall Dimensions:Height: Upto 73.2", Length: 40", Width: 40" Chain Length: 36" (Adjustable) Design: Round Colour : Gold No. of Bulb Holders: 22Cord Length (Inches): 36 (adjustable) Holder & Plug Type : E‐14 Product Material: Metal, Glass Tube Weight (Per Kilogramme) : 36 , the item also includes 22 Nos 40 Watt regular candle E-14 bulb .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supply, installation, testing & Commissioning of Chandelier of the following specifications:=  Overall Dimensions: Height: Upto 66.5", Length: 59", Width: 19.5" Chain Length: 36"  (Adjustable) Design: Rectangle Colour : Gold No. of Bulb Holders: 22 Cord Length (Inches): 32 (adjustable) Holder & Plug Type : E‐14 Recommended Bulb: LED Only Product Material: Metal, Metal  Pipes and Glass Rods Weight (Per Kilogramme) : 42.8 the item also includes 22 Nos 40 Watt regular candle E-14 bulb .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6

-

-

... More
Supply, installation, testing & Commissioning of Hanging Light of the following specifications Glass Size : 40 cm No. of Bulb Holders : 5  Cord Length (Inches)  : 36 (Adjustable) Holder & Plug Type  : G‐9/E‐14  (LED Only) Product Material : Metal, Glass, Crystals Weight (Per Kilogramme)  : 5 the item also includes 5 Nos 5 Watt chip[ LED Small chip G-9 bulb (BL2-10034) .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

46

-

-

... More
Crystal Chandeliers Supply, installation, testing & Commissioning of dressing area Chandelier of the following specifications  Colour :Gold Holder & Plug Type :Built‐In LED Wattage :20 Watts, 60 Watts Temperature :3000K‐6500K Bulb Provided :Built‐in LED Provided Product Material  :Metal, Silicone Diffuser  Weight (Per Kilogramme) : 5.6 Crystal Ceiling Light with Remote Control per specification .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

30

-

-

... More
Bed Side Lamp Supply, installation, testing & Commissioning of Bed Side Lamp of the following specifications No. of Bulb Holders Holder & Plug Type : E‐27 Recommended Bulb :LED Only Wattage :3 Watts Product Material : Metal, Plastic‐reinforced Fabric Shades Weight (Per Kilogramme) : 1.5 the item also includes 1 Nos 40 Watt regular candle E-27 bulb Premium Wall Light with In‐Built LED SPOT Light per specification ..complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

26

-

-

... More
Supply, installation, testing & Commissioning of Table lamp ‐ (Black Marble)Length: 14", Height: 19.5", Depth: 14" Colour : Black Holder & Plug Type : E‐27 Recommended Bulb : LED Only No. of Bulb Holders :1 Product Material : Metal, Fabric Weight (Per Kilogramme) : 4.2 the item also includes 1 Nos 40 Watt regular candle E-27 bulb 1 Table Lamp as per specification.complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

40

-

-

... More
Supply, installation, testing & Commissioning of (Marble) Table Lamp Height: 22", Length: 15", Width: 15" Colour ; Gold Holder & Plug Type : E‐27 Recommended Bulb : LED Only No. of Bulb Holders : 1 Product Material : Metal, Fabric Product Weight (in Per Kilogramme) : 3.8 the item also includes 1 Nos 40 Watt regular candle E-27 bulb  1 Premium Marble Table Lamp as per specification .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

26

-

-

... More
Providing and installation of stationary storage type Electric water heater (Geyser) of 25/30 ltrs capacity by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, 4 star rating, testing and commissioning etc. All above should be .complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. make Baja, havells or as approved by Engineer incharge.

35

-

-

... More
SITC of Water Cooler 150 Ltr Storage Capacity and Cooling Capacity 150 Ltr/Hr, (with purifier System) 2 Tap Stainless Steel of t All above should be complete to the entire satisfaction & carriage of material in all leads and lifts STORAGE WATER COOLERS

3

-

-

... More
Provoding ,fixing , testing and commissioning of HAIR DRYER- PHILIPS BHC010/10(1200w Black) complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

33

-

-

... More
Provoding ,fixing , testing and commissioning of LG 45 L 2 Star Direct Cool single door Refrigerator (GL-M051RSWC Super-WHITE ) complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

33

-

-

... More
Provoding ,fixing , testing and commissioning of Pigeon Aura 1.2 ltr. Double Walled Kettle / Stainless Steel Interior /cool Touch outer body/with keep warm feature /1 year warranty (black ,1500 watt ) complete to the entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

33

-

-

... More
Provoding ,fixing , testing and commissioning of Hotel TV- Samsung 43 inches HG 43 AU series complete to the entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

33

-

-

... More
Provoding ,fixing , testing and commissioning of Hotel TV- Samsung HG 55 AU series complete to the entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

1

-

-

... More
Provoding ,fixing , testing and commissioning of Large format display 110 inches LG 110 5 MJ TV complete to the entire satisfaction & carriage of material in all leads and lifts and as per direction of Engineer incharge

1

-

-

... More
MAIN LT & SYNCH . PUMP ROOM PANELS, DG Per SetS , CABLES ETC MAIN L.T Per cubic Metre PLC SYNCH PANEL- WATER PARK Designing, Supply, Installing, testing & commissioning of Powder coated Main Distribution Panel fabricated out of 14-gauge CRCA sheet steel not less than 2.0 mm thick for load bearing members and 1.6mm for doors. in cubical, compartmentalised freestanding floor /wall mounted, dust and vermin proof,with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V,3-Phase,Four wire,50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardware like nuts and bolts used shall be Stainless Steel) (Note: Vendor can select the next higher fault rating of MCCB if it is not readily available, without any extra cost, as the figure indicated within the bracket are required maximum fault level of that panel)The general construction shall confirm to IS:8623/93 or latest amendment.The panel framework may be angle iron/channel/bolted type construction.All gasket/rubber part shall be Neoprene flame/Dust/Vermin proof.Panels shall have 7/8 tank pretreatment process comprising of Degreasing, Rinsing, De- rusting, Rinsing, Phosphatissing, Rinsing, passivation & Drying followed by powder coat painting having a paint thickness of 60 microns or as specified.Vendor is ensure that the all nuts/bots are properly tighten, All left out holes are closed, Megger testing, Earth testing after the errection.Two Per Sets of Hard copy of G.A & Circuiting Details shall be submitted by the vendor to Get approval from the Client/Consulatant.The panel builder shall provide fire shunt relay contact in panel wherever necessary/ or as per SLD along with auto / manual mode selector switch on the incomer of one DG Per Set feeder and outgoing feeder in electrical panel etc. to take fire input signal (Potential Free Contact).All relays to operate at 240Volts, Single phase, 50Hz, AC supply through UPS of suitable capacity. The UPS is also in the scope of supply.One DG Per Set shall be on in case of fire so all provisions between DG breaker and fire panel shall be in the scope Vendor.Unloading, Testing, Shifting at appropriate location on site shall be in the scope of vendor.Vendor shall give full technicall support to the contractor and also send their engineers in short notice.All meter shall be with RS485 portAll MCB shall be 10KAIn case any descriepency with outgoing numbers in SLD vs BOQ need to be consider SLDonly for outging ampare and numbers.ALL Electrical Panel Should be BMS Compatible.General Notes:ACB: LSIG ( Microprocessor Based) releases shall be used for transeformer & DG Per Set incoming/outgoing feeders.

-

-

-

... More
All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases & ON/OFF/Trip/Spring charged/ready to close indicating lamps/Trip circuit healthy.All ACBs to be provided with ON/OFF/Trip lamps,3 NO + 3NC Auxiliary contacts other than used in control circuit.All incoming breakers in Main LT panel shall be electrically interlocked,as per inter locking scheme given in SLD.MCCB:MCCBs shall be used with Thermal Magnetic Based releases type for MCCB upto 250A rating and microprocessor based type above 250A rating.All MCCBs shall be provided with Over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.All MCCBs shall be fitted with extended type rotary handles and spreader links and ON/OFF/TRIP lamps Breaking capacity mentioned is Ics value.This BOQ to be read in conjunction This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to have been considered.All meters shall be digital type (unless otherwise specified)All MCB shall be motor duty type.All current/voltage transformer shall be cast resin type.All indicating lamps shall be LED type.Current density for Al. bus bars shall not be more than 0.8A/Per Square Metrem. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)All internal control wiring shall be FRLS type.All TP feeders shall be provided with Isolable neutral link.Bus couplers shall be provided with ON & OFF indicating lights but without releases.All feeders shall be provided with door interlocked with door defeat, pad lock facility.Live parts shall not be accessible after opening the door, Transparent sheet, SMC/DMC fire retardant protective shroud to be provided to cover the same.Spare contacts of ACBs / MCCBs / Relay / Contactor shall be wired upto terminal block.All incoming/outgoing cables shall be terminated on links/terminals.Necessary contacts/signal to be provided to the AMF based DG panel.Connnection from the communication port of all the Meters in Main LT Panel shall be left at one place in a cubical.Panel ventilation shall be in each compartment with suitable size exhaust fan.6/16Amp Switch Socket outlet and LED light shall be provided in each comartment of panel Control supply in Main LT Panel will be 24V DC & 230V AC/24V DC control unit will be provided in the panel as required.MAIN L.T Per cubic Metre PLC SYNCH PANEL Incomers:Transformer Incomer (1 Nos., 1000 KVA)One (1) Nos. Transformer incomers each shall be provided with the followings switchgear and accessories :-1600 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based,with overload, short circuit&earth fault releases with IDMT relay and phase sequence relay for transformer with communication ports for 485connectivity. Metering&Indication Multifunction meter(A.V,kW,kWH,KVA,KVAR,Hz,Harmonic distortion level) with communication ports.1600/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering1600/1A, Cl-5P10,15VA cast resin CT's 4 Nos. for REF Protection. (3 Nos. to be provided in the panel & 1 No. shall be supplied loose along with the panel)1600/5A, Cl-5P10, Cast resin CTs (3 Nos.) for IDMT Relay1600/5A CL-1, 15 VA cast resin CT (2 No.) for APFCRPer Set of RYB phase indicating lamps protected by 2A control MCB.1 Per SetBreaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB.Trip Circuit Healthy illuminated push button protected by 2A control MCB.4 Window annunciator with audio/visual alarm and test accept/rePer Set push button.DG Per Set Incomer 1NO 320 KVAIncomer from DG Per Set shall be provided with the following switchgear and accessories :-1 No. 630 A,50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Per Set with communication ports RS 485 connectivity. & Provision for automatic mains faliure with relays. & control wiring.Metering & Indication of each feeder : 1 Per Sets of R,Y,B phase indicating lamps each with Fuse1 Nos. Load Analyser Per cubic Metre digital Multifunction Meter with 3 Nos.800/5A, CL-1 CTs, as required.1 Per Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication LampsOne (1) Per Set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating)One no. hour run meterVoltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries.Battery/charger indication (if integral to DG breaker).DG running indication.NIC on/off.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and rePer Set PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.4 Window annunciator with audio/visual alarm and test accept/rePer Set push button.DG Per Set Incomer 1NO 500 KVAIncomer from DG Per Set shall be provided with the following switchgear and accessories :-1 No. 800 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Per Set with communication ports RS 485 connectivity. & Provision for automatic mains faliure with relays. & control wiring.Metering & Indication :1 Per Sets of R,Y,B phase indicating lamps each with Fuse1 Nos. Load Analyser Per cubic Metre digital Multifunction Meter with 3 Nos. 1000/5A, CL-1 CTs, as required.1 Per Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication LampsOne (1) Per Set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating)One no. hour run meterVoltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries.Battery/charger indication (if integral to DG breaker).DG running indication.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and rePer Set PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.Master Trip Lockout relay (86)Trip Circuit Supervision Relay (95)4 Window annunciator with audio/visual alarm and test accept/rePer Set push button.Metering & Indication :Multifunction meter (A.V,kW, kWH,KVA,KVAR,Hz,Harmonic distortion level) with communication ports EM 6400 NG300/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering

-

-

-

... More
Per Set of RYB phase indicating lamps protected by 2A control MCB.Breaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB.Trip Circuit Healthy illuminated push button protected by 2A control MCB.Bus Coupler 1 Nos. 1600 A, 50kA, 4P EDO intelligent, motorized ACB with ON/OFF indication but without releases.Electrical interlocking shall be provided between all the incomers and bus coupler so that two supplies are not mixedup.Note -The left & right section has to operate in isolation as well as coupled mode. When Bus coupler breaker is ON only one of the incoming breaker can be closed in case of normalsupply.The protection/interlock shall be such that individual buses can be fed individually by TR or DG incoming in all possible operating conditions. Paralleling of grid not permitted.Provision of mini PLC to be made for auto interlocking of Bus couplers.Busbars2000A, 4P aluminium , colour coded insulated bus bars suitable for 415V, 50Hz AC Supply.(For Each Bus Section)Dedicated Bus bar required with the protective shoruds for 110V supply.Outgoing:All outgoings except space for spare's shall be provided the followings accessories:-ON/OFF/TRIP indicating lamps.Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz) with communication ports for BMS and CT's CL-1 of suitable ratio.2 Nos. 630 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.1 Nos. 400 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection1 Nos. 250 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.2 Nos. 200 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection. 2 Nos. 160 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.6 Nos. 100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.DG LOAD MANAGEMENT SECTIONAccessories for Engine Control: Each DG breaker to be provided with :AMF logic with 3 attempt start, restoration circuit, idle running circuit as per specification to be provided including Per Set of relays, timers, Aux. Contactors etc. for meeting auto/manual start/stop & control of engine as per specifications & drawings. In addition, the scheme should be PLC based as described elsewhere.Auto/manual/ test selector switch.Engine start/stop/EM stop PBs, speed and voltage raise/lower control switch suitable motorised pot etc.Power supply including back up batteries/ charger for above.PLC Based DG Control Panel (Siemens/Allen Bradley make):PLC based control panel having following features :AMF operation (through PLC) manual override to be provided for manual operation when PLC is not available or out of circuit).Auto Load management SystemAuto load sharing among D.G. Per SetsAuto load balancing and managementNotes:For meeting requirement of input to PLC from various relays, CB positions etc, suitable CTs/ PTs/ TBs and interface for analog & digital input/output shall be provided to achieve successful operation of the DG Per Set & system as a whole.The DG Control EDO ACBs complete with Amp, volt, kwh, freq. Meter etc. are located in the panel.BOQ given above is for a composite panel identifying the scope of supplies. However, bidder shall include all such components as are necessary for a successful and safe AMF scheme in both manual as well as on auto & PLC mode.Note -The left & right section has to operate in isolation as well as coupled mode. When Bus coupler breaker is ON only one of the incoming breaker can be closed in case of normal supply.The protection/interlock shall be such that individual buses can be fed individually by TR or DG incoming in all possible operating conditions. Paralleling of grid not permitted.Provision of mini PLC to be made for auto interlocking of Bus couplers.

1

-

-

... More
MAIN L.T Per cubic Metre PLC SYNCH PANEL -WELLNESS CENTER Designing, Supply, Installing, testing & commissioning of Powder coated Main Distribution Panel fabricated out of 14-gauge CRCA sheet steel not less than 2.0 mm thick for load bearing members and 1.6mm for doors. in cubical, compartmentalised freestanding floor /wall mounted, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardware like nuts and bolts used shall be Stainless Steel) (Note: Vendor can select the next higher fault rating of MCCB if it is not readily available, without any extra cost, as the figure indicated within the bracket are required maximum fault level of that panel)complete to the entire satisfaction & carriage of material in all leads and lifts The general construction shall confirm to IS:8623/93 or latest amendment.The panel framework may be angle iron/channel/bolted type construction.All gasket/rubber part shall be Neoprene flame/Dust/Vermin proof.Panels shall have 7/8 tank pretreatment process comprising of Degreasing, Rinsing, De- rusting, Rinsing, Phosphatissing, Rinsing, passivation & Drying followed by powder coat painting having a paint thickness of 60 microns or as specified.Vendor is ensure that the all nuts/bots are properly tighten, All left out holes are closed, Megger testing, Earth testing after the errection.Two Per Sets of Hard copy of G.A & Circuiting Details shall be submitted by the vendor to Get approval from the Client/Consulatant.The panel builder shall provide fire shunt relay contact in panel wherever necessary/ or as per SLD along with auto / manual mode selector switch on the incomer of one DG Per Set feeder and outgoing feeder in electrical panel etc. to take fire input signal (Potential Free Contact).All relays to operate at 240Volts, Single phase, 50Hz, AC supply through UPS of suitable capacity. The UPS is also in the scope of supply.One DG Per Set shall be on in case of fire so all provisions between DG breaker and fire panel shall be in the scope Vendor.Unloading, Testing, Shifting at appropriate location on site shall be in the scope of vendor.Vendor shall give full technicall support to the contractor and also send their engineers in short notice.All meter shall be with RS485 port All MCB shall be 10KAIn case any descriepency with outgoing numbers in SLD vs BOQ need to be consider SLD only for outging ampare and numbers.ALL Electrical Panel Should be BMS Compatible. General Notes:ACB: LSIG ( Microprocessor Based) releases shall be used for transeformer & DG Per Set incoming/outgoing feeders.

-

-

-

... More
All Transformer and DG incoming ACBs shall be provided with Microprocessor based releases & ON/OFF/Trip / Spring charged/ready to close indicating lamps/Trip circuit healthy.All ACBs to be provided with ON/OFF/Trip lamps, 3 NO + 3NC Auxiliary contacts other than used in control circuit.All incoming breakers in Main LT panel shall be electrically interlocked, as per inter locking scheme given in SLD.MCCB:MCCBs shall be used with Thermal Magnetic Based releases type for MCCB upto 250A rating and microprocessor based type above 250A rating.All MCCBs shall be provided with Over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.(All MCCBs shall be fitted with extended type rotary handles and spreader links and ON/OFF lamps whereever provided in SLD.Breaking capacity mentioned is Ics value.This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to have been considered.All meters shall be digital type (unless otherwise specified)All MCB shall be motor duty type.All current/voltage transformer shall be cast resin type.All indicating lamps shall be LED type.Current density for Al. bus bars shall not be more than 0.8A/Per Square Metrem. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)All internal control wiring shall be FRLS type.All TP feeders shall be provided with Isolable neutral link.Bus couplers shall be provided with ON & OFF indicating lights but without releases.All feeders shall be provided with door interlocked with door defeat, pad lock facility.Live parts shall not be accessible after opening the door, Transparent sheet, SMC/DMC fire retardant protective shroud to be provided to cover the same.Spare contacts of ACBs / MCCBs / Relay / Contactor shall be wired upto terminal block.All incoming/outgoing cables shall be terminated on links/terminals.

-

-

-

... More
Necessary contacts/signal to be provided to the AMF based DG panel.Connnection from the communication port of all the Meters in Main LT Panel shall be left at one place in a cubical. Panel ventilation shall be in each compartment with suitable size exhaust fan.6/16Amp Switch Socket outlet and LED light shall be provided in each comartment of panelControl supply in Main LT Panel will be 24V DC & 230V AC/24V DC control unit will be provided in the panel as required.MAIN L.T Per cubic Metre PLC SYNCH PANEL Incomers :-Transformer Incomer (1 Nos., 800 KVA)One (1) Nos. Transformer incomers each shall be provided with the followings switchgear and accessories :-1250 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for transformer with communication ports for RS 485 connectivity.Metering & Indication Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz, Harmonic distortion level) with communication ports.600/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering1250/1A, Cl-5P10,15VA cast resin CT's 4 Nos. for REF Protection. (3 Nos. to be provided in the panel & 1 No. shall be supplied loose along with the panel)1600/5A, Cl-5P10, Cast resin CTs (3 Nos.) for IDMT Relay 1250/5A CL-1, 15 VA cast resin CT (2 No.) for APFCR Per Set of RYB phase indicating lamps protected by 2A control MCB. - 1 Per Set Breaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB.Trip Circuit Healthy illuminated push button protected by 2A control MCB.4 Window annunciator with audio/visual alarm and test accept/rePer Set push button.DG Per Set Incomer 1NO 380 KVA Incomer from DG Per Set shall be provided with the following switchgear and accessories :-1 No. 800 A,50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Per Set with communication ports RS 485 connectivity. & Provision for automatic mains faliure with relays. & control wiring.Metering & Indication of each feeder :1 Per Sets of R,Y,B phase indicating lamps each with Fuse 1 Nos. Load Analyser Per cubic Metre digital Multifunction Meter with3nos.800/5A,CL-1CTs as required.1 Per Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication LampsOne (1) Per Set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating)One no. hour run meter Voltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries.Battery/charger indication (if integral to DG breaker).DG running indication.NIC on/off.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and rePer Set PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.4 Window annunciator with audio/visual alarm and test accept/rePer Set push button.DG Per Set Incomer 1NO 320 KVAIncomer from DG Per Set shall be provided with the following switchgear and accessories :-1 No. 630 A, 50kA, 4P EDO intelligent motorized ACB, microprocessor based, with overload, short circuit & earth fault releases with IDMT relay and phase sequence relay for each D.G. Per Set with communication ports RS 485 connectivity. &Provisionfor automatic mains faliure with relays. & control wiring.Metering & Indication :1 Per Sets of R,Y,B phase indicating lamps each with Fuse1 Nos. Load Analyser Per cubic Metre digital Multifunction Meter with 3 nos. 1000/5A, CL-1 CTs, as required.1 Per Sets of Breaker ON-OFF-TRIP, Spring charged & Trip circuit healthy indication Lamps One (1) Per Set of vibrating reed type frequency meter having range of 45 to 55 Hz.One No. digital KW meter with MDI indicator(Meter scale to suit DG rating)One no. hour run meter Voltmeter & Ammeter of battery/Battery charger system for charging of 180 AH capacity batteries. Battery/charger indication (if integral to DG breaker).DG running indication.One (1) No. 8 window audio/visual annunciator system complete with hooter, ack, test and rePer Set PBs for Annunciation of low lube oil pressure, High water temperature, engine over speed, Elect. Protection trip, Engine fail to start, low fuel level faults etc.Master Trip Lockout relay (86)Trip Circuit Supervision Relay (95)4 Window annunciator with audio/visual alarm and test accept/rePer Set push button. SOLAR INCOMER 1 No. 630 A, 50kA, FP intelligent motorized MCCB, microprocessor based, with overload,short circuit & earth fault releases Metering & Indication : Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz, Harmonic distortion level) with communication ports EM 6400 NG

-

-

-

... More
350/5A, Cl-1.0 , 15VA Cast resin CTs (3 Nos.) for metering 350/5A, CL 5P-10, Cast resin CTs (3 Nos.) for voltage restrained over current relay Per Set of RYB phase indicating lamps protected by 2A control MCB.Breaker ON/OFF/Trip/Spring charged / Ready to close indicating lamps protected by 2A control MCB. Trip Circuit Healthy illuminated push button protected by 2A control MCB. Bus Coupler1 nos. 800A, 50kA, 4P EDO intelligent, motorized ACB with ON/OFF indication but without releases.Electrical interlocking shall be provided between all the incomers and bus coupler so that two supplies are not mixedup.Note -The left & right section has to operate in isolation as well as coupled mode. When Bus coupler breaker is ON only one of the incoming breaker can be closed in case of normal supply.The protection/interlock shall be such that individual buses can be fed individually by TR or DG incoming in all possible operating conditions. Paralleling of grid not permitted.Provision of mini PLC to be made for auto interlocking of Bus couplers.Busbars 2000A, 4P aluminium , colour coded insulated bus bars suitable for 415V, 50Hz AC Supply.(For Each Bus Section) RYB indication lamps with 2A MCB for Bus sections Dedicated Bus bar required with the protective shoruds for 110V supply.Outgoing:All outgoings except space for spare's shall be provided the followings accessories :-ON/OFF indicating lamps.Multifunction meter (A.V,kW, kWH, KVA, KVAR, Hz) with communication ports for BMS and CT's CL-1 of suitable ratio.1 Nos. 630 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.(For HVAC outdoor Panel)1 Nos. 400 Amp Four Pole Moulded Case Circuit Breaker of 50KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.(For Wellness building Panel)1 Nos. 250 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection.(For Fire Pump House Panel)2 Nos. 200 Amp Four Pole Moulded Case Circuit Breaker of 36 KA (Ics = Icu upto 433 volt) breaking Capacity with microprocessor release for O/L, S/C & E/F protection. (For Heat Pump/Plumbing & spare) 1 Nos. 160 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.(For Cottages)8 Nos. 100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection.(3 nos lifts/External Lighting/Terrace pumps & spare) DG LOAD MANAGEMENT SECTION Accessories for Engine Control:Each DG breaker to be provided with :AMF logic with 3 attempt start, restoration circuit, idle running circuit as per specification to be provided including Per Set of relays, timers, Aux. Contactors etc. for meeting auto/manual start/stop & control of engine as per specifications & drawings. In addition, the scheme should be PLC based as described elsewhere.complete to the entire satisfaction & carriage of material in all leads and lifts Auto/manual/ test selector switch.Engine start/stop/EM stop PBs, speed and voltage raise/lower control switch suitable motorised pot etc.Power supply including back up batteries/ charger for above.PLC Based DG Control Panel (Siemens/Allen Bradley make):PLC based control panel having following features :AMF operation (through PLC) manual override to be provided for manual operation when PLC is not available or out of circuit).Auto Load management System. Auto load sharing among D.G. Per SetsAuto load balancing and managementNotes:For meeting requirement of input to PLC from various relays, CB positions etc, suitable CTs/ PTs/ TBs and interface for analog & digital input/output shall be provided to achieve successful operation of the DG Per Set & system as a whole.The DG Control EDO ACBs complete with Amp, volt, kwh, freq. Meter etc. are located in the panel.BOQ given above is for a composite panel identifying the scope of supplies. However, bidder shall include all such components as are necessary for a successful and safe AMF scheme in both manual as well as on auto & PLC mode.Note -The left & right section has to operate in isolation as well as coupled mode. When Bus coupler breaker is ON only one of the incoming breaker can be closed in case of normal supply.The protection/interlock shall be such that individual buses can be fed individually by TR or DG incoming in all possible operating conditions. Paralleling of grid not permitted.Provision of mini PLC to be made for auto interlocking of Bus couplers

1

-

-

... More
M AIN LT PANEL- HOSTEL BLOCK :Fabricating, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 125 KVA silent type DG Per Set complete with relays, timers, Per Set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following:sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in  transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:complete to the entire satisfaction & carriage of material in all leads and lifts. Colour: Gray Powder Coated, as per approved sample.Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic release & MCCBs above 250 amps rating shall be provided with Microprocessor based release. (All MCCBs shall be fitted with extended type rotary handles and spreader links)1nos, 250 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100% ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.- Mains Supply 1nos, 250 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100% ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.- DG Supply 1 Nos. 300 Amp. 415 volt AC 3 duty 4 pole contactor - 2nos 1 No. 300 A 415V, AC , 4P Manual Changeover with Operating Handle Auto/Manual/Test/Off selector switch 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.3 Per Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering Energy analyser unit to indicate current voltage frequency power factor and KWH Indicating lamps for load on mains and load on Per Set Fuse for instruments Battery charger, complete with transformer/rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. Main supply failure monitor Supply Failure Timer Restoration Timer Control unit with three impulse automatic engine start/stop and failure to start lockout Impulse counter with locking and rePer Set facility.ON/OFF/Control circuit switch with indicatorAudio/Video annunciation for.(i) High water temperature (ii) Low lubricating oil pressure (iii) Engine over speed (iv) Engine fails to start (v) Full load/maximum load warning BUSBAR TPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS 01 Nos 125 Amp Four Pole Moulded Case Circuit Breaker of 16 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For Oudoor AC Panel 01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For Terrace pumps Panels 01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For Lift 01 Nos.63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For UPS 03 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For Kitchen DB/FF/2 nd Floor 02 Nos. 100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link completewith extended Rotary Mechanism and Spreader Link Per Set. For DB & External Lighting 02 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For spare

1

-

-

... More
FLOOR PANELS - WELLNESS CENTER :Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in  transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:Type of construction: Form 3IP classification: 42 Colour: Gray Powder Coated, as per approved sample. Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic release & MCCBs above 250 amps rating shall be provided with Microprocessor based release. (All MCCBs shall be fitted with extended type rotary handles and spreader links) INCOMER 1 nos, 400 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB. .RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 630 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS All outgoings feeders shall have MFM & ON/OFF/TRIP LED Indicating Lamp with 1 A SP MCB for protection. along with necessary CTs 2 Nos.160 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. (For First & Second Floor)1 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. (For Third Floor)1 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. (For UPS)8 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. (For VTDBs)2 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. (Spare)

1

-

-

... More
Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in  transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:Type of construction: Form 3 IP classification: 42 Colour: Gray Powder Coated, as per approved sample.Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic release & MCCBs above 250 amps rating shall be provided with Microprocessor based release. (All MCCBs shall be fitted with extended type rotary handles and spreader links)INCOMER 1 nos, 200 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 1000 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERSAll outgoings feeders shall have ON/OFF/TRIP LED Indicating Lamp with 1 A SP MCB for protection. 2 Nos.100 Amp Four Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For VTPDBs 04 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity. For VDBs & Spare

2

-

-

... More
Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar tapered (hut type) made out of 2mm thick CRCA sheet having separate cable and bus bar alley double door arrangement with two leaf door on front side and single door with double leaf on rear side with locking arrangement, having 200 amp TPN Aluminum bus bar of full length with base frame made out of 50x50x6mm thick angle iron having 300 mm legs duly erection in ground with construction of cement concrete complete with connection and interconnection with copper conductor PVC insulated cables / insulated copper conductor strip of appropriate size and terminals blocks (on outgoing) including supplying and fixing following switch gears & accessories there in powder coating, labeling, earthing etc. complete as required.IP classification: 42 Colour: Gray Powder Coated, as per approved sample.Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic release & MCCBs above 250 amps rating shall be provided with Microprocessor based release. (All MCCBs shall be fitted with extended type rotary handles and spreader links)INCOMER 1 nos, 100 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 10 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBARTPN aluminum bus bars of minimum of 1000 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS All outgoings feeders shall have ON/OFF/TRIP LED Indicating Lamp with 1 A SP MCB for protection.4 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity.4 Nos 32 Amp Two Pole Miniature Circuit Breaker of 10 KA breaking Capacity.

1

-

-

... More
PUMP ROOM SUB PANELS (FOR FILTERATIONS & SLIDES/ACTIVITY PUMPS) - WATER PARK Design, Fabrication,Supply, Installation, Testing and Commissioning of following Wall mounted / Floor mounted(including base stand), 415V,3PH, 50Hz extensible and fully compartmentalized panels. The indoor panels shall be IP 42 and outdoor panels shall be IP 55 type.The Panel shall have proper space with required clearance for cables, incoming / outgoing switchgear, CTs, PTs, ammeter, Voltmeter, selector switches, Insulated and properly supported compartmentalized bus bars with heat shrinkable sleeves along with the other control circuit accessories within the panel and any other electrical component mentioned in the Panel SLD.The panel shall be fabricated out of CRCA not less than 2.0 mm thick for load bearing members and 1.6mm for the doors of LT panel.The Panel shall have seven tank pre treatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising, rinsing and passivation followed by powder coat painting having a paint thickness of 60 microns or as specified.The Panel shall be Dust/Vermin poof with earth studs as per the SLD and specifications.complete to the entire satisfaction & carriage of material in all leads and lifts.Supply, installation testing and commissioning of Direct on line starter / Star-delta starters suitable for motors as below mentioned capacities. The starter shall comprise of all necessary power and control equipments including Auto / Manual selector switch, Start/stop push butons, LED indications, Star contactor , delta contactor , timer relay contactor, electronic timer, potential free NO/NC contacts and necessary control wirings properly connected in fully usable state. Minimum utilization catagory for all contactors shall be AC3 and contactor shall be capable to withstand the steady state (full load) and starting inrush current. The starter shall have necessary protection device (MPCB +EOCR) whose Per Settings and ratings shall be as per the type-2. The starter shall have inbuilt protection against overcurrent, short circuit and single phasing.MCCBs shall be used with Thermal Magnetic Based releases type for MCCB upto 250A rating and microprocessor based type above 250A rating. All MCCBs shall be provided with Over load & Short Circuit releases. Incoming MCCB shall be provided with E/F releases also.All MCCBs shall be fitted with extended type rotary handles and spreader links and ON/OFF/TRIP lamps PUMP ROOM NO 1 (TOTS ACTIVITY & RAIN DANCE)INCOMER 1 nos, 160 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No.Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder.3 NOS. 5HP DOL STARTER 7 NOS. 3HPDIRECT ONLINE STARTER 40 Amp 4P MCB, 10 KA - 04 Nos. 16 Amp DP MCB, 10 KA - 04 Nos.

1

-

-

... More
PUMP ROOM NO 2 (TOWER D)INCOMER 1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 50 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 750 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 20 Nos. 20 HP FULLY AUTOMATIC STAR DELTA STARTER 3 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER 7 Nos. 5 HPDIRECT ONLINE STARTER 8 Nos. 3 HPDIRECT ONLINE STARTER 40 Amp 4P MCB, 10 KA - 04 Nos. 16 Amp DP MCB, 10 KA - 04 Nos.

1

-

-

... More
PUMP ROOM NO 3 (WAVE POOL) INCOMER ,1 nos, 400 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 500 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS1nos, 160 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) complete as per specifications detailed above &1 No.Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB ,RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.complete to the entire satisfaction & carriage of material in all leads and lifts.Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. complete to the entire satisfaction & carriage of material in all leads and lifts 2 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER 40 Amp 4P MCB, 10 KA - 04 Nos. 16 Amp DP MCB, 10 KA - 04 Nos.

1

-

-

... More
PUMP ROOM NO 4 (TOWER C) INCOMER PUMP ROOM NO 4 (TOWER C)INCOMER ,1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 50 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 750 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder. 6 Nos. 12.5 HP FULLY AUTOMATIC STAR DELTA STARTER 4 Nos. 10 HP FULLY AUTOMATIC STAR DELTA STARTER 9 Nos. 7.5 HP FULLY AUTOMATIC STAR DELTA STARTER 2 Nos. 5 HP DIRECT ONLINE STARTER 2 Nos. 1.5 HP DIRECT ONLINE STARTER 2 Nos. 4.5 HP DIRECT ONLINE STARTER 3 Nos. 5.5 HP DIRECT ONLINE STARTER 40 Amp 4P MCB, 10 KA - 04 Nos. 16 Amp DP MCB, 10 KA - 04 Nos.

1

-

-

... More
PUMP ROOM NO 5 (FOR UNDER GROUND TANK)INCOMER ,1 nos, 200 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=ICU up to 433 V) complete as per specifications detailed above.1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 300 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOINGS Fully Automatic Star-Delta/DOL starter suitable for motor HP detailed below with Motor Protection Circuit Breaker, indications, push buttons, auto / manual selector switch, OLR & SPPR, Contactors for star & delta connections complete for operations of the pumps with cyclic operation and automatic switch over of the pumps in case of failure of either pump etc as required with each feeder.4 Nos. 20 HP FULLY AUTOMATIC STAR DELTA STARTER 40 Amp 4P MCB, 10 KA - 04 Nos. 16 Amp DP MCB, 10 KA - 04 Nos.

1

-

-

... More
LT CABLES , END TERMINATIONS AND LAYING Supply, testing & commissioning of Aluminium / Copper conductor XLPE. insulated PVC sheathed armoured Cable conforming to IS 7098 Part- 1 ammended upto date complete as per equirement at the site of work upto entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
3.5 C x 300 Per Square Metrem XLPE cable Aluminium conductor

750

-

-

... More
3.5 C x 240 Per Square Metrem XLPE cable Aluminium conductor

750

-

-

... More
3.5 C x 185 Per Square Metrem XLPE cable Aluminium conductor

650

-

-

... More
3.5 C x 150 Per Square Metrem XLPE cable Aluminium conductor

550

-

-

... More
3.5 C x 120 Per Square Metrem XLPE cable Aluminium conductor

250

-

-

... More
3.5 C x 95 Per Square Metrem XLPE cable Aluminium conductor

300

-

-

... More
3.5 C x 70 Per Square Metrem XLPE cable Aluminium conductor

200

-

-

... More
3.5 C x 50 Per Square Metrem XLPE cable Aluminium conductor

150

-

-

... More
3.5 C x 35 Per Square Metrem XLPE cable Aluminium conductor

250

-

-

... More
4 C X 25 Per Square Metrem XLPE cable Aluminium conductor

300

-

-

... More
4 C X 16 Per Square Metrem XLPE cable Aluminium conductor

850

-

-

... More
4 C X 10 Per Square Metrem XLPE cable Aluminium conductor

300

-

-

... More
4 C X 6 Per Square Metrem XLPE cable Aluminium conductor

100

-

-

... More
4 C X 4 Per Square Metrem XLPE cable Aluminium conductor

250

-

-

... More
4 C X 25 Per Square Metrem XLPE cable copper conductor

150

-

-

... More
3 C X 35 Per Square Metrem XLPE cable copper conductor

50

-

-

... More
3 C X 25 Per Square Metrem XLPE cable copper conductor

200

-

-

... More
3 C X 16 Per Square Metrem XLPE cable copper conductor

200

-

-

... More
3 C X 10 Per Square Metrem XLPE cable copper conductor

400

-

-

... More
3 C X 6 Per Square Metrem XLPE cable copper conductor

300

-

-

... More
3 C X 4 Per Square Metrem XLPE cable copper conductor

400

-

-

... More
2 C X 16 Per Square Metrem XLPE cable Aluminium conductor

75

-

-

... More
Copper Conductor Control Cables Armoured: 8 C x 2.5 Per Square Metrem PVC Cu Armd. Cable

125

-

-

... More
Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders etc including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
100 mm width X 50 mm depth X 1.6 mm thickness

400

-

-

... More
150 mm width X 50 mm depth X 1.6 mm thickness

445

-

-

... More
300 mm width X 50 mm depth X 1.6 mm thickness

170

-

-

... More
MV CABLE JOINTING & END TERMINATION :Supplying and making end termination with brass double compression gland and aluminium/ copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
3½ X 300 sq. mm (70mm) with Aluminuim lugs

32

-

-

... More
3½ X 240 sq. mm (62mm) with Aluminuim lugs

28

-

-

... More
3½ X 185 sq. mm (57mm) with Aluminuim lugs

28

-

-

... More
3½ X 150 sq. mm (50mm) with Aluminuim lugs

12

-

-

... More
3½ X 120 sq. mm (45mm with Aluminuim lugs

14

-

-

... More
3½ X 95 sq. mm (45mm) with Aluminuim lugs

4

-

-

... More
3½ X 70 sq. mm (38mm) with Aluminuim lugs

8

-

-

... More
3½ X 50 sq. mm (35mm) with Aluminuim lugs

8

-

-

... More
3½ X 35 sq. mm (32mm) with Aluminuim lugs

24

-

-

... More
4 X 25 sq. mm (28mm) with Aluminuim lugs

8

-

-

... More
4 X 16 sq. mm (28mm) with Aluminuim lugs

38

-

-

... More
4 X 10 sq. mm (25mm) with Aluminuim lugs

10

-

-

... More
4 X 6 sq. mm (25mm) with Aluminuim lugs

40

-

-

... More
4 X 4 sq. mm (25mm) with Aluminuim lugs

46

-

-

... More
4 X 25 sq. mm (28mm) with Copper lugs

18

-

-

... More
3 X 35 sq. mm (28mm) with Copper lugs

20

-

-

... More
3 X 25 sq. mm (25mm) with Copper lugs

2

-

-

... More
3 X 16 sq. mm (25mm) with Copper lugs

6

-

-

... More
3 X 10 sq. mm (22mm) with Copper lugs

12

-

-

... More
3 X 6 sq. mm (22mm) with Copper lugs

40

-

-

... More
3 X 4 sq. mm (22mm)with Copper lugs

24

-

-

... More
2 X 16 sq. mm (22mm)

10

-

-

... More
MV CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Upto 35 sq. mm

60

-

-

... More
Above 35 sq. mm and upto 95 sq. mm

150

-

-

... More
Above 95 sq. mm and upto 185 sq. mm

250

-

-

... More
Above 185 sq. mm and upto 400 sq. mm

500

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Upto 35 sq. mm

410

-

-

... More
Above 35 sq. mm and upto 95 sq. mm

800

-

-

... More
Above 95 sq. mm and upto 185 sq. mm

750

-

-

... More
Above 185 sq. mm and upto 400 sq. mm

750

-

-

... More
Upto 35 sq. mm

60

-

-

... More
Above 35 sq. mm and upto 95 sq. mm

150

-

-

... More
Above 95 sq. mm and upto 185 sq. mm

400

-

-

... More
Above 185 sq. mm and upto 400 sq. mm

400

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Upto 35 sq. mm (clamped with 1mm thick saddle)

750

-

-

... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

700

-

-

... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

650

-

-

... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

700

-

-

... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
63 mm dia (OD-63 mm & ID-51 mm nominal)

50

-

-

... More
90 mm dia (OD-90 mm & ID-76 mm nominal)

50

-

-

... More
120 mm dia (OD-120 mm & ID-103 mm nominal)

560

-

-

... More
160 mm dia (OD-160 mm & ID-135 mm nominal)

560

-

-

... More
200 mm dia (OD-200 mm & ID-175 mm nominal)

640

-

-

... More
SAFETY ITEMS :Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side as required .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

24

-

-

... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Supply and Erection of MS angle iron bucket stand which include 4 Nos. fire bucket with 9.5 ltr. Capacity with stand filling including cost of welding and painting of complete stand & buckets with one coat of red oxide and two coats of approve paint of red color written with fire on the buckets as per fire protection with all labour and petty material required to complete the job in all respect upto the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

14

-

-

... More
Supply and erection of Rubber Mat of size 2m x 1m x 12 m thick (NS) withstand 15 KV dielectric strength conforming to IS:5424/1969 (IS marked) complete in all respect..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

18

-

-

... More
Supply and fixing in position approved shock treatment chart written in English, Hindi nd local language. These charts shall be framed in wooden frame and covered with clear glass of thickness not less than 5 mm .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Supply and fixing of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross conforming to IS 2217 - 1963 .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

9

-

-

... More
Supplying and fixing hHand Gloves complete as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
DG Per SetS 22-02-2024Providing, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating Per Set alongwith having Prime Power Rating of below mentioned, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor suitable for synchronizing and consisting of the followings as required.:.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Diesel engine 4 stroke liquid cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.Engine mounted Instrument Panel fitted with and having digital display for following: (i)Start-stop switch with finger touch (ii)Water temperature indication (iii)Lubrication oil pressure indication (iv)Lubrication oil temperature indication (v)Battery charging indication (vi) RPM indication (vii)Over speed indication (viii)Low lub. Oil trip indication (ix)Engine Hours indication Alternator : Base Frame & Foundation Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel Tank :Daily service fuel tank of capacity 480 liters/manufacturer standard fabricated with suitable gauge of M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System :As per Latest CPCB Norms Starting System :12V/24V DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with suitable Nos. of batteries (suitable capacity) as required as per specifications. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. Synchronous alternator rated at below mentioned capacity, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & a 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self- excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation.complete to the entire satisfaction & carriage of material in all leads and lifts

-

-

-

... More
125 KVA - Hostel Block

1

-

-

... More
320 KVA - Wellness Center & Water Park

2

-

-

... More
380 KVA - Wellness Center

1

-

-

... More
500 KVA - Water Park

1

-

-

... More
Supply and fixing Exhuast piping for DG Per Set's with following sizes of MS pipes conforming to IS -3589 with bends, tees, reducers, fleixble connection etc. providing & fixing suitable self supporting arrangement duly painted at suitable intervals, supplying & fixing of 150 mm thick Rock wool matrix (3x50 mm. thick) insulation of density 150Per Kilogramme per cubic Per running Metre on all sides of Exhaust pipe with chicken mesh wrapping and 22 SWG aluminium sheet cladding , suitable for outdoor installation, guide support, expansion joint, SS bellows complete as required and as per specification.complete.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
100 mm dia MS pipe (5.20 mm thick).

10

-

-

... More
125 mm dia MS pipe (5.20 mm thick).

40

-

-

... More
150 mm dia MS pipe (5.20 mm thick)

40

-

-

... More
Fabrication, supply & erection of MS support for fixing of exhaust piping and MS structure including Angle / chanels / flats / beam as per approved drawings for supporting of DG exhaust stack from ground. floor level and above terrace level complete in all respect.complete to the entire satisfaction.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2500

-

-

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Per running Metre long etc. with charcoal/ coke and salt as required .complete to the entire satisfaction.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Copper Plate Earthing For Neutral and Body Earthing of DG & TransformerEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Per running Metre long etc. with charcoal/ coke and salt as required .complete.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

22

-

-

... More
Supplying and laying Extra salt and charcoal for earthing pits complete as per specifications as per direction of Engineer Incharge/ Project Manager complete.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

32

-

-

... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

110

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

140

-

-

... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.complete to the entire satisfaction & carriage of material in all leads and lifts complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

75

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.complete to the entire satisfaction.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

150

-

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6500

-

-

... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

17

-

-

... More
LIGHTNING CONDUCTOR ADVANCED LIGHTENING PROTECTION SYSTEM (ALPS) Supply, Installation, testing & commissioning of CPRI tested Early Streamer Emission Lightning Conductor (ESELC) air terminal having Δt (gain in triggering time) of minimum 40 ųs and radius of protection 75 meters in Level 1 protection zone along with 5 mtrs mast (3mtrs.GI +2mtrs FRP) with base plate, guying kit and other accessories for installation of ESELC on the top of the building to protection from direct lightning strike. Device Confirming to NFC 17 – 102 standards. (Make - ABB)complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supplying and fixing of 2 digit electromechanical Lightning Event Counter in IP 65 enclosure without external power source complete with interconnection in series with down conductor path mounted at the height 2 meters from ground level. The counter should give the number of strikes intercepted by the lightning arrester etc complete as required and as per specifications attached. complete to the entire satisfaction.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supply and fixing of 70 Per Square Metrem single core copper conductor PVC sheathed unarmoured cable complete with connection testing etc. as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

40

-

-

... More
Supplying and fixing Test joint mounted at the height of 1.5 meters from ground level. The test joint shall be provided in a link plastic box, fitted with 25mmx5mm thick 125mm long Copper strip, with 2Nos. epoxy insulators, 4Nos Brass bolts, check nuts & spring washers, etc. complete as required, in order to disconnect the earth termination system for measurement of earth results etc complete as required & as per specifications attached. complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
AUDIO VIDEO / CONFERENCING , DIGITAL PA & SOUND SYSTEM , NETWORKING (FIXED/WiFi) & CCTV , IPBX & UPS SYSTEM AUDIO VIDEO -Wellness Center Providing ,installation, testing and commissioning of full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a soft-dome tweeter mounted in a vented, paintable baffle made of UV resistant material, with a pre-attached blindmount backcan for quick and easy installation with support power tapping complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager (Make JB )complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Power Rating 50 W continuous at 8 ohms

11

-

-

... More
Power Rating 75 W continuous at 8 ohms

9

-

-

... More
Providing, installation, testing and commissioning of Ultra Compact 2-way Wall Speaker 1 x 5.25” System, Power Rating 150 W at 16 Ohms complete in all respect complete .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
CEILING SUB WOOFER Providing, installation, testing and commissioning of High-Impact In-Ceiling Subwoofer Long excursion 200 mm (8 in) driver with ; support Power Tapping at 70V/100V; etc. ,Packaged with grille, backcan and tile rails for fast, complete to the entire satisfaction .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Power Rating 75 W continuous at 8 ohms

4

-

-

... More
Power Rating 100 W continuous at 8 ohms

3

-

-

... More
Providing, installation, testing and commissioning of Power Subwoofer 1 x 15" High Power Subwoofer System; Power Rating 400W Continuous at 8 Ohms, fitted with M10 threaded suspension points for ultimate flexibility. complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing ,installation, testing and commissioning of Ethernet Wall Controller 4 Buttons consisting of a single Ethernet port for configuration, control, monitoring, and power via PoE, Wall Mount Controller with Volume Control knob & LCD screen, complete in all respect as per entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Providing, installation, testing and commissioning of Small-format Analog Mixing Console with USB audio interface (For recording, editing, and playback) desktop based complete in all respect Including EQ, aux send, master fader, and rotary headphone volume control complete in all respect including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

7

-

-

... More
Providing, installation, testing and commissioning of Audio over IP Transceiver (audio-over-IP solution), ethernet based (with RJ 45 SOCKET) completein all respec with analog audio input & output connections, headphoine jack as per entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Providing, installation, testing and commissioning of 2x XLR Input Wall Plate complete XLR Female lock type connectors etc complete in all respect including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Providing, installation, testing and commissioning of Highly weather-resistant IP56 rating coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system with Power rating 120W Continuous at 8 Ohms, with High-power passive crossover network, Overload protection complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Providing, installation, testing and commissioning of weather-resistant Landscape Speaker Coaxial Loudspeaker, Power Rating 120W pk at 8 Ohms, Transformer Taps 70V/100V, IP56 rated,L-bracket for surface mounting complete in all respect as per entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

12

-

-

... More
Providing ,installation, testing and commissioning of full-range ceiling speaker consisting of a 76 mm (3.5 inch) high tech cone driver and a soft-dome tweeter mounted in a vented, paintable baffle made of UV resistant material, with a pre-attached blindmount backcan for quick and easy installation with support power tapping complete in all respect including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Make JB )

48

-

-

... More
Providing, installation, testing and commissioning of full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a soft-dome tweeter mounted in a vented, paintable baffle made of UV resistant material, with a pre-attached blind mount back can for quick and easy installation with support power tapping complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Power Rating 30 W continuous at 8 ohms

6

-

-

... More
Providing, installation, testing and commissioning of Analog Class D Power Amplifier , Multichannel Power Amplifier with 8x125W Power Output complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Line array column Loudspeaker 8 x 2" Full Range Drivers; with Eight 50 mm (2 in) Drivers, mounting bracket for flexibility (Swivel (pan) / tilt wall bracket). complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of conference microphone system with the following with the following accessories, complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (i) Gooseneck Module for fixed and mobile installation with a programmable mute switch that can be Per Set to various functions, e.g. on/off, push-to-talk or push-to-mute. LED ring for MIC ON/OFF indicationcomplete to the entire satisfaction & carriage of material in all leads and lifts of Engineer Incharge / Project Manager (ii) A high-performance hyper cardioid condenser microphone capsule integrated into a rugged metal housing (III) shock mount designed for permanent installation of gooseneck modules

14

-

-

... More
Provoding, installation, testing and commissioning of professional multichannel wireless microphone system consisting of Wireless Lapel & Head Worn Microphone Per Set Wireless (Presenter Microphone) with RF diversity Antenna Receiver System; RF Band BD1; RF Output Power 50mW complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Conferencing Processor with fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of USB Based Audio Bridge USB Audio to BLU link Interface; support 8x8 operation with driver installed mode complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Digital Signal Processor - I/O Expander 8 Channel Input Audio Expander (Break-In-Box), Compatible with all BLU Link DSPs complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of high-definition baseband Transmitter Digital Media complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager Switchers (with full 4:4:4 color space),HDCP 2.2 support USB 2.0 distribution complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of high-definition baseband Receiver Digital Media Switchers (with full 4:4:4 color space),HDCP 2.2 support USB 2.0 distribution complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6

-

-

... More
Provoding, installation, testing and commissioning of 4K HDMI Decor Style Wallplate Transmitter ccomplete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Provoding, installation, testing and commissioning of Accessories -USB Capture Device HDMI to USB 3.0 capture device; support 4K60 4:4:4 video and HDCP 2.2, standard UVC interface and control, etc. complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of 4K60 matrix switchers Precis PR-Series 8x8 matrix switcher; Support 4K60 4:4:4 and HDR10+ video, control with an open control API and HTML5 web interface complete to the entire satisfactionincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Integrated Controller Integrated NetLinx Controller with 512 MB RAM,1600 MIPS Processor,4 Serial Ports,4 IR Ports,4 I/O Ports,4 Relays, IPv6 and Dual NIC complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Accessories -12 VDC, 5.4 A Power Supply with 3.5 mm Phoenix Connector with Retention Screws complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of Touch Panel -10.1” Professional-Grade, Persona-Defined CloudworX Touch Panel i/c tabletop stand for placement on meeting space and boardroom tables or other flat surfaces. complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Packaged Surface-Mount Subwoofer-Satellite Loudspeaker System Provoding, installation, testing and commissioning of Satellite Loudspeaker System Surface-Mount Passive Subwoofer-Satellite Loudspeaker System Incl.1 Subwoofer + 4 Satelite Speaker; etc,Wall-mount brackets complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Portable system All-In-One Rechargeable Column PA with Built-In Mixer and DSP; 1x12" Woofer; 12x2.5"HF Driver; Power 2000W pk complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of Digital Power Amplifier , Network Based Multichannel Digital Power Amplifier with 8 x 600W; built-in DSP and BLULink Support; etc. complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of Digital Signal Processor 16 I/O Chassis Based Configurable Signal Processor with BLU link / EN 54-16 Compliant for Life Safety Applications complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of DSP - Input Card , 4 Channel Mic Line Level Input Card BSS Model #BLUCARD-IN complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of DSP - Output Card , 4 Channel Line Level output Card complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Provoding, installation, testing and commissioning of Integrated Controller Integrated NetLinx Integrated NetLinx RAM, 1600 MIPS Processor, 4 GB of FLASH, 2 Serial Ports,2 IR Ports, 4 I/O Ports, and IPv6 complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Provoding, installation, testing and commissioning of 3305X00010 Wireless Handheld Microphone Per Set Wireless Handheld Dynamic Microphone with RF diversity Antenna Receiver System; RF Band 1; RF Output Power 50mW APer Kilogramme Model #WMS470 D5 Per Set BD1-50MW complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Provoding, installation, testing and commissioning of Touch Panel -10.1” Professional-Grade, Persona-Defined CloudworX Touch Panel; complete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supply, installation, testing & commissioning of rack mounting switcher / control unit and Voice Alarm Call Station having gooseneck condenser microphone with 12 zone Selection Keys and an All-Call-Key, PTT Switch, selectable gain, speech filter and limiter for improved intelligibility, LED indication for zone selection, fault and emergency, controller etccomplete to the entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing, installation, testing and commissioning of the below mentioned as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Wall Speaker (Rating 400 W) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Frequency Range (-10dB) 55 Hz – 20 kHz Frequency Response (±3 dB) 80 Hz – 20 kHz Coverage Pattern 90° x 90° Directivity Factor (Q) 10.1 (1 k – 16 kHz) Directivity Index (DI) 9.5 dB (1k – 16 kHz) System Power Rating 400 W (1600 W peak), 2 hrs. 250 W (1000 W peak), 100 hrs Sensitivity (2.83V @ 1m) 96 dB (Ave. 80 Hz – 20 kHz) Maximum SPL (1m) Direct 8Ω: 122 dB (peaks of 128 dB) 200 W Tap: 119 dB Crossover Network 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF Nominal Impedance 8 ohms Transformer Taps 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W LF Driver Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil. HF Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling. HF Driver Protection Minimum audibility SonicGuard™ HF overload protection Enclosure ABS with Glass enclosure, heavily braced Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3- layer assembly with foam and woven poly mesh backing. Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36") Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). Dimensions 402 x 402 x 445mm (15.8 x 15.8 x 17.5 in), cabinet 470 mm (18.5 in) depth with gland nut 542 mm (21.4 in) including bracket extending to back Colors Available in gray (similar to Pantone 420C) and black (-BK) Net Weight (each) 15.9 Per Kilogramme (35.0 lb), 18.9 Per Kilogramme (41.5 lb) with u-bracket Shipping Weight 23.4 Per Kilogramme (51.5 lbs) Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel. Crossover Modes Passive Nominal LF Driver Impedance 8 ohms (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant)

12

-

-

... More
Wall Speaker (Rating 250 W) Frequency Range (-10dB) 80 Hz – 20 kHz Frequency Response (±3 dB) 100 Hz – 20 kHz Coverage Pattern 120° x 120° Directivity Factor (Q) 8.1 (1 k – 16 kHz) Directivity Index (DI) 8.4 dB (1 k – 16 kHz) System Power Rating 250 W 2 hrs. 200 W 100 hrs Sensitivity (2.83V @ 1m) 94 dB (Ave. 100 Hz – 20 kHz) Maximum SPL (1m) Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB Crossover Network 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF Nominal Impedance 8 ohms Transformer Taps 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W LF Driver Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil. HF Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling. HF Driver Protection Minimum audibility SonicGuard™ HF overload protection Enclosure ABS with Glass enclosure, heavily braced Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36") Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). Dimensions 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back Colors Available in gray (similar to Pantone 420C) and black (-BK) Net Weight (each) 9.8 Per Kilogramme (21.5 lb), 11.6 Per Kilogramme (25.5 lb) with U-bracket Shipping Weight 14.1 Per Kilogramme (31.0 lb) Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel. Crossover Modes Passive Nominal LF Driver Impedance 8 ohms (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant)

14

-

-

... More
LF Extender - Subwoofer Providing, installation, testing and commissioning of the below mentioned as per detailed specification inducated complete to the entire satisfaction & carriage of material in all leads and lifts of Engineer Incharge / Project Manager i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Frequency Range (-10dB) 45 Hz – 2.2 kHz Frequency Response (±3 dB) 70 Hz – 1.2 kHz System Power Rating 500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs. Sensitivity (2.83V @ 1m) 94 dB (Ave. 80 Hz – 300 Hz) Maximum SPL (1m) Direct 8Ω: 121 dB (peaks of 127 dB) 300 W Tap: 119 dB (peaks of 125 dB) Nominal Impedance 8 ohms (in Direct mode) Transformer Taps 70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75W LF Driver 380 mm (15 in), Kevlar-reinforced cone, with weather treatment, 75 mm (3 in) voice coil, long throw. Enclosure ABS with Glass enclosure, heavily braced Attachment Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside openlug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36") Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). Dimensions 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-thick powder coated, steel. Nominal LF Driver Impedance 8 ohms (in Direct mode) Suspension Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Net Weight (each) 20.2 Per Kilogrammes. (44.5 lbs.) (Make :-JBL/ Martin Audio / Meyer sound or equivalent as approved by engineer / Consultant)complete to the entire satisfaction & carriage of material in all leads and lifts of Engineer Incharge / Project Manager

6

-

-

... More
Wall / Pole Brackets Providing, installation, testing and commissioning of Galvanized U Bracket for al speakers, powder coated with IP 56 Covering as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .(Make :- Crown or equivalent as approved by engineer / Consultant) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

26

-

-

... More
Digital Signal Processor: Providing, installation, testing and commissioning of the 12x8 Signal Processor with BLU link (EU) as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager . (Make :- BSS/QSC/BIAMP or equivalent as approved by engineer / Consultant) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Analog Mixing Console "Providing, installation, testing and commissioning of the10 mic input Analog Mixing console with FX as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager . (Make :-Soundcraft/YAMAHA/ALLEN AND HEATH or equivalent as approved by engineer / Consultant) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Providing, installation, testing and commissioning of4 x 1250 watt Amplifier 4 channels 1250 watt @ 8 ohm with CLASS D and DSP inbuilt with Blue link mandatory as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .(Make :-Crown/QSC/MEYER SOUND or equivalent as approved by engineer / Consultant) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Providing, installation, testing and commissioning of 1.5 sq mm 16 AWG Speaker cable with anti magnetic and 99.9% bare copper with rubber IP 56 insulation as per detailed specification inducated complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3000

-

-

... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

12

-

-

... More
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
CABLING & WIRING: Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Speaker cable Single pair, 2-core, 1.5 Per Square Metrem

100

-

-

... More
Speaker cable Two pair, 2-core, 1.5 Per Square Metrem

50

-

-

... More
NETWORKING : and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

121

-

-

... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

100

-

-

... More
NETWORKING Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm)Supply, Installation, Testing and Commissioning of Cat 6A, Information Outlet, UL Listed, Color Blue/grey/white/other (I/O) for Data, Voice, CCTV & Wi-Fi on the existing modular plate & switch box including connections but excluding modular plate etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (for user end).

156

-

-

... More
Wi Fi ACCESS POINTS Designing Supply, Installation, Testing and Commissioning of wifi 6, 802.11ax Dual band 2.4-GHz and 5-GHz wireless access Point, (Backward compatible to 802.11b/g/n/a/ac). Dual band 4x4 (2.4GHz and 5.0GHz)8 streams of data for an aggregate throughput of up to 3.6Gbps. Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN1. Orthogonal Frequency Division Multiple Access. Should feature 2.5GbE port.Built in controller with Remote management complete in all respect including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Indoor

33

-

-

... More
Outdoor

16

-

-

... More
Supply installation Testing and commissioning of Wireless Access Controller High Performance Enterprise-Class Wireless Controller with 50 AP Support on one device and can be stacked in 3+1 to support upto 150AP (One for redundancy) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, installation, testing and commissioning of Router/Security Appliance Stateful firewall, 1:1 NAT, DHCP, DMZ, static routing, Identity-based policies Auto VPNTM self-configuring site-to-site VPNClient VPN (IPsec)User and device quarantineVLAN support and DHCP services, Content filtering (Webroot BrightCloud CIPA compliant URL database), Web search filtering (including Google and Bing SafeSearch), Intrusion prevention (SourceFire Snort based), Malware Protection complete in all respect as per entire satisfaction of Engineer Incharge / Project Managerincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, Installation, Testing & Commissioning of 5 MP IR IP H.265 High Speed PTZ dome camera with 30X Optical zoom, Accurate & fast focusing, WDR, Micro SD card slot, Smart analytics and 200M IR support,Intrusion detection, Cross line detection,Auto Tracking,Compatibility ONVIF (Profile S,G), AP Iincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Supply, Installation, Testing and Commissioning of 5 MP Dome Camera (with protective enclosure), ONVIF profile S & G, UL, CE, FCC Certified, 1/2.8" CMOS sensor, 3.6 mm fixed focal, triple stream, Min Illumination: 0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @(F2.0, AGC ON), 0 Lux with IR, Shutter Speed : 1/5 ̴ 1/100, 000 s, Edge analytics: line crossing, perimeter intrusion, stationary object, Video Compression: H.265, H.264, frame rate 30 fps @ 3MP, Edge analytics: line crossing, perimeter intrusion, Face detection, cross counting, stationary object, In built IR LED, IR distance upto 30 mtrs, IP 66, POE.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

62

-

-

... More
Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light 5 IR Rugged Outdoor Bullet Camera, 1/2.8" CMOS, 2MP @ 25/30fps, Video coNS/MRession H.265, H.264 High Profile and MJPEG, Min. Pixels 1920x1080p, Automatic Varifocal lens 2.8 -12 mm DC Iris with motorized focus & zoom, Min. Illumination required 0.07 lux (color), 0.008 (mono), 0 Lux IR ON , Min WDR as per IEC-62676-PART 5 - 85dB, Defog, 850nm intensity adjustable IR LEDs Smart IR with upto 50m IR distance, MInimum 512GB SD card support, 60 sec pre- alarm recording,Camera should have fully configurable quad streaming , Alarm I/O: 1 In/ 1out, Audio I/O: 1 In/ 1outPoE, Analog Video Output, IP 67, IK 10 , Camera security Password protection, IP address filtering, HTTPSa encryption, IEEE 802 including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

64

-

-

... More
NVR Supply, Installation, Testing and Commissioning of 64-CH High Performance H.265 NVR, Network Video Input: 64-CH, Video Compression: H.265+/H.265(HEVC)/H.264+/H.264, Disk Array Type: RAID. SATA: 8xSATA HDD, 1xeSATA. Capacity: 10TB capacity. Bandwidth Requirement: 320Mbps. Output: 2-CH HDMI Output. 2-CH VGA Output. Dual Stream Support. Recording Resolution:12MP/8MP/6MP/ 5MP/4MP/3MP/1080P/ UXGA/720P/D1/VGA/CIF/QCIF. Network Interface 2x Gigabit Ethernet Ports. USB Interface. Audio Input/Output. Alarm Input/output. Video Analysis capabilities. Built in Transcoding features including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Supply, Installation, Testing & Commissioning of 43" Flat Screen HD led (24X7) with Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc complete as reqd. i/c carriage of material in all leads and lifts of Engineer Incharge / Project Managerincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supply, Installation, Testing and Commisioning of Client workstation Processor intel i7, 13th Gen, 4ghz or higher, OS geniune Window 11, Color Monitor 22", RAM 8GB DDR3 SDRAM, MEMORY 1TB HDD, 2GB GRAPHIC CARD complete as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supply, Installation, Testing and Commissioning of 24 Gigabit ports core Switch L3 routing capabilities. 24-port 1000BASE-T RJ45), 2-port 10GBASE-T (RJ45), 2-port 10GBASE-X (SFP+). 128 Gbps Switching capacity Full IPv6 support with dual stack (|Pv4 and IPv6), multicasting, and QoS, static routing and dynamic routing. Should have Network virtualization and segmentation. Should support network monitoring. Full L3 feature Per Set and non stop forwarding (NSF) stacking complete in all respect as per entire satisfaction of Engineer Incharge / Project Manage rincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply installation Testing and commissioning of L2 Switch 10/100/1000 POE+ Switch of following ports with 2 dedicated 10G SFP+ ports + 2 dedicated 1G SFP ports i/c Data Patch Panel of following way Un Loaded. complete in all respect as per entire satisfaction including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
48 port

4

-

-

... More
24 port

5

-

-

... More
16 port

6

-

-

... More
8 port

3

-

-

... More
Providing, installation, testing and commissioning of 10G Multi Mode Modules complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

28

-

-

... More
Supply ,Installation ,Testing and Comissioning of Cat6 UTP 24-26 AWG Patch Cord - 1mtr with cross separator,Manufactured from starnded wires for flex-life,Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332- 1 including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

11

-

-

... More
Supply ,Installation ,Testing and Comissioning of Cat6 UTP 24-26 AWG Patch Cord - 2mtr with cross separator,Manufactured from starnded wires for flex-life,Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332-1 including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

11

-

-

... More
Supply and erection of 19 U wall mount rack, Tinted Toughened Glass Door, 2 pairs 19” of Mounting Rail(front & back) with “U” marking screen printed,Side panel High quality fan of High Cool brand,High quality PDUincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.

19

-

-

... More
Supply, installation, testing and commissioning of 42U Equipment Rack, 800 x 1000mm. Lockable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Supply, installation, testing and commissioning of 42U Equipment Rack, 800 x 1000mm. Lockable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, ower distribution units & equipmentshelves as required,fully welded construction for strength.Extra-wide rack rail for cablepass-throughs to facilitate front-to-rear cabling complete i/c carriage of material in all leads and lifts of Engineer Incharge / Project ManagerSupplying, Installation, Testing & Commissioning of Digital IP PBX System having 6 Analog CO Lines 2 Digital extensions 16 Analog extensions with CLI DSP Card with VoIP Activation Key 96 SIP Extensions 2 Port Auto Attendant, Welcome Greetings – IVR Customised Music on Hold 2 Hours Simplified Voice Mail Day, Night Message with COS Control Flexible Numbering Plan for 1 digit - 5 digit numbering 1 Sot to expand upto 128 IP Extensions . Provision to add additional Cabinets and CPU and Upgrade to 130 Analog extensions and 128 IP Phones.ISDN PRI Line Card including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, installation, testing and commissioning of IP SIP Control console for receiption digital phone Per Set PoE Based with display screen conferencing, contacts, call history records with 6 Line Display, 24 DSS Keys , Sp-phone, etc complete as reqd.- For Reception including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Supply, installation, testing and commissioning of IP SIP Based basic digital phone Per Set PoE Based with display screen conferencing, contacts, call history records etc complete as reqd including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

34

-

-

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. 25mm.

3950

-

-

... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
1 run of cable

2600

-

-

... More
2 run of cable

1350

-

-

... More
Supplying and drawing of cable Fire Retardant double insulated PVC copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
speaker cable Single pair, 2-core, 1.5 Per Square Metrem

1000

-

-

... More
speaker cable Single pair, 2-core, 2.5 Per Square Metrem for outdoor

190

-

-

... More
Supply, installation, testing and commissioning of OFC armoured outdoor Single-mode 6 Core OS2, should be ISO / IEC 11801 - 2nd edition type OS 2 and ITU-T REC G652 tube identification single tube / multiple tube fibre protection (Tube): Polybutylene Terephthalate (PBT). Water Blocking: Thixotropic Gel (Tube) and Petroleum Jelly (Interstices). Core Wrapping: Polyethylene Terephthalate. Armouring: Corrugated Steel Tape Armour (ECCS Tape). Strength Member : Two Steel wires on periphery / two FRP rods on periphery / Central Strength Member FRP. Sheath: UV Stabilized Polythene (HPDE). Maximum Tensile Strength - Short Terms: 1500N or better. Mass (Nominal : Minimum 95Per Kilogramme/km. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

25

-

-

... More
Supply,installation, testing and commissioning of OPTICAL FIBER PIGTAILS, 1.5 meter SM OS2. Precision ferrule end face geometry SC type SM. Factory polished, tested and serialized. Buffer diameter: 900um tight buffer. Minimum bend radius: install: 30 mm. Retention Strength: 100N. Cable: 900um buffered. Sheath: LSZH. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
SITC of 3Ph- 3Ph true Online UPS System in standalone configuration with advance DSP based technology’ Double conversion IGBT Rectifier and IGBT based inverter UPS system with inbuilt/External Isolation transformer with cabinet and SMF battery backup using 12V batteries including battery protection M.S Rack suitable dimension, well air ventilation to ensure the battery optimum life cycle, proper rating cable for interlinks cable and D.C cable up to 10 mtrs from UPS to batteries including labour charges for installation testing and commission and carrying charges with following Special Features.Static Variation +/-1% & Dynamic variation +/-3% Output frequency: 50Hz +/-0.1% output Power factor: 0.9 waveform: Pure sine wave, Min Overall efficiency 94%, Current Harmonics 3%, Overload: 110% for 60minutes, 125% for 10 minutes, 150% for 1 minutes. Static by pass: 100% rated static switches with fuse protection overload on bypass: 100% for 10 ms.Protections: input & Output over / under voltage single phasing, DC - High / under voltage, Battery charging over current, output overload / Short Circuit / Over temp. UPS auto on mains recovery protections. Input & Output over / under voltage, single phasing, DC – High / under voltage, battery charging over current output overload / short circuit / over temp. UPS auto ON mains recovery switchgear: MCB / MCCB for input battery, output & manual bypass switch operating temp. 0 to 40Deg C, IP 20enclosure,RH max 95% forced air cooling, max sound less then 60db, communication: Rs. 232, Rs. 485, dual input Kit, monitoring software: UPS monitoring software on windows XP platform, Certification: ISO 9001:2015 ISO 14001: 2015, ISO 18001 RoHS & OHSAS 18001, CE Certification: IEC/EN 62040-1-1, IEC/EN50091-1, IEC/EN 60950 (safety) IEC/ EN 50091-2, IEC/EN 62040-2 (EMC Emission), IEC/EN 62040-3 (performance & Design) IEC/EN 61000-4 (EMC Emmunity) & IEC/EN 60146.UPS Make – DELTA / POWER ONE / Numeric / APC / Vertiv and Battery make:- Exide Power Safe/ Amararaja Quanta Note

-

-

-

... More
15 KVA 12V SMF Batteries for 30 minutes backup

1

-

-

... More
10 KVA 12V SMF Batteries for 30 minutes backup

1

-

-

... More
Supply installation testing commissioning of IP-66, Street Light luminares 60 W made up of Aluminium die cast powder coating and thoughned glass optical compartment shall be covered with heat resistant having system lumen 6000 with luminaire efficacy min 120 LPW , CRI 80 ,UGR19 CCT 4000K/5000K PF 0.95 and THD5%complete .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

120

-

-

... More
Supply installation testing commissioning of IP-66, Street Light luminares made up of made of aluminum housing duly powder coated / PU painted with Poly carbonate Clear /Frosted diffuser 40 w Rating with luminaire efficacy 120 LPW , CRI 80 ,UGR19 CCT 4000K/5000K PF 0.95 and THD5%complete as.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

16

-

-

... More
Supply installation testing commissioning of IP-66, Bollard light luminare made up of Aluminium die cast powder coating and thoughned glass optical compartment shall be covered with heat resistant having system lumen 1000 with luminaire efficacy 100 LPW , CRI 80 ,UGR19 CCT 4000K/5000K PF 0.95 and THD5% .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

120

-

-

... More
Supplying,installation,testing and commissioning of 4 meter heigh galvanized pole (bolt fixing type) Ornamental Pole with base plate of welded at bottom of pole complete with suitable Nos 20 mm dia 600 mm long foundation bolts weathproof electrical junction box having terminal block, 32A 4P MCB in incomer & 16A DP MCB in outgoing for Pole Light ON/ OFF etc mounted on bakelite sheet for looping in /looping out of cables, with flush door having locking arrangement, earthing arrangement (at atleast 0.5 m height) and mounted on RCC foundation of size 500 mm x 500 mm x 1200 mm in ground and 300 mm above ground level with foundation bolt duly embeded before casting and supply and embedding of suitable size HDPE pipe sleeve for cable entry. complete including erection of Pole complete in all respect as per specification .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

16

-

-

... More
Supplying,installation,testing and commissioning of 8 meter heigh galvanized pole (bolt fixing type) Ornamental Pole and 1000mm long Single arm bracket of approved design and shape made up of MS metal with hot dip galvanised suitable for pole top of 70mm diawith base plate of welded at bottom of pole complete with suitable Nos 20 mm dia 600 mm long foundation bolts weathproof electrical junction box having terminal block, 32A 4P MCB in incomer & 16A DP MCB in outgoing for Pole Light ON/ OFF etc mounted on bakelite sheet for looping in /looping out of cables, with flush door having locking arrangement, earthing arrangement (at atleast 0.5 m height) and mounted on RCC foundation of size 500 mm x 500 mm x 1200 mm in ground and 300 mm above ground level with foundation bolt duly embeded before casting and supply and embedding of suitable size HDPE pipe sleeve for cable entry. complete including erection of Pole complete in all respect as per specification .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

120

-

-

... More
Supply, Installation, testing and commissioning of SMC Junction Boxes,100% weatherproof ,Maintenance-free Pole mounted bollard lighting for 3 phase/4 core based lighting system including copper terminal blocks for incoming and outgoing cables (size up to 4 C x 16 Per Square Metrem) and a 6~32 amps SP MCB, mounting complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

120

-

-

... More
Supplying & drawing 3x2.5sq.mm size FR PVC insulated copper conductor single core cable in the existing pipe .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1104

-

-

... More
Supplying of following size XLPE insulated, PVC sheathed Aluminium conductor cable for rated voltage of 1100 volts grade conforming to IS :7098 (part-1)/88 with amendment no. 1 armored with galvanized steel strip (ISI mark) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
4×16 sq.mm.(for compound lighting)

3900

-

-

... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
63 mm dia (OD-63 mm & ID-51 mm nominal)

3900

-

-

... More
Supplying and laying 6 SWG G.I. wire along with cable below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5900

-

-

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
4 X 16 sq. mm (25mm)

388

-

-

... More
Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar tapered (hut type) made out of 2mm thick CRCA sheet having separate cable and bus bar alley double door arrangement with two leaf door on front side and single door with double leaf on rear side with locking arrangement, having 100 amp TPN Aluminum bus bar of full length with base frame made out of 50x50x6mm thick angle iron having 300 mm legs duly erection in ground with construction of cement concrete complete with connection and interconnection with copper conductor PVC insulated cables / insulated copper conductor strip of appropriate size and terminals blocks (on outgoing) including supplying and fixing following switch gears & accessories there in powder coating, labeling, earthing etc. complete as required . a) 100Amps, 415V, 20 KA, TPN MCCB with operating handle (Incomer) = 1 No b) 100 Amps. 415V, 3 phase AC, TP power contactor = 1 No c) 63 A 4 Pole MCB complete with interconnections as required. - 10 nos d) Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun Per Set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as reqd 3 output (1output per phase) and suitable for three phase supply.6 nos 4 pole 32 amp Isolator.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
FACADE ILLUMINATION Supply, installation, testing & Commissioning Outdoor Architectural of 3000K linear wallwasher made of aluminium extrusion, LED Make : CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG, exterior-rated linear luminaire (1000mm), Input Power 60W, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 3600Lm. IP protection rating : IP66. The luminaire should have multiple beam angle: 10°, 20, 40, 60°, 10X20° complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .. Make- Orient, Philips, Havells. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

14

-

-

... More
Supply, installation, testing & Commissioning of Outdoor Architectural Up- Down Light 3000K 12 W (6X2W)complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6

-

-

... More
Supply, installation, testing & Commissioning of Outdoor Architectural LED strip made of Silicon with 3000K 10W per mtr, 24V, 60LEDs per mtr, CRI 80(for white), 600 lumens per mtr. The entire led should be IP67 protected with sealed ends customized as per the various site points complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .. LM79 report to be submitted along the bid. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

550

-

-

... More
Supply, installation, testing & Commissioning of Aluminium Channel for LED strip complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

550

-

-

... More
Supply, installation, testing & Commissioning of IP67 power supply 24V output. Power consumption- 200W complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

60

-

-

... More
Supply, installation, testing & Commissioning of enclosure for Power Supply : Plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

60

-

-

... More
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating with wired remote,having all hermetically sealed inverter type Scroll / DC Twin rotary Compressor(s), minimum two compressors modules, microprocessor based Controller,topdischarge type condensing unit(s), with R410A Refrigerant, vibration isolators,with suitable foundation etc.complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.The unit shall be suitable to work on400V+/-10%, 3Phase,50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required.The Outdoor Units shall be factory treated using Anti-corrosive Hydrophilic Coating. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. (Required configuration as per Engineer Incharge). For Wellness Centre 32 HP- 2 nos48 HP -2 nos 96 HP -2 nos For Cottages

-

-

-

... More
06 HP for Cottages (Cottage 1, 2, 3) 09 HP for Cottages (Cottage 4, 5, 6)

379

-

-

... More
Hostel Area 12 HP- 2 nos 18 HP -2 nos

60

-

-

... More
Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF CasPer Sette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
1.5 HP

26

-

-

... More
2.5 HP

2

-

-

... More
Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
3.0 HP (MINIMUM CFM 990 )

32

-

-

... More
4.0 HP (MINIMUM CFM 1180 )

4

-

-

... More
5.0 HP (MINIMUM CFM 1590 )

1

-

-

... More
10.0 HP (MINIMUM CFM 3300 )

7

-

-

... More
12.0 HP (MINIMUM CFM 3700 )

2

-

-

... More
16.0 HP (MINIMUM CFM 5280 )

9

-

-

... More
20.0 HP (MINIMUM CFM 5280 )

3

-

-

... More
Supply, installation, testing & commissioning of Touch Screen Type of LCD Screen Based Corded Remote Control for Duct Type IDU . This remote should have following operational mode display - Cooling / Heating /Dry Mode / Fan Mode & Auto Mode, air flow changing . The temperature Per Setting should be varied on a interval of 0.5 degree C, also should have functions like daily timer , weekly timer , operation lock & main sub control . suitable for above indoor units to operate.The remote controller shall be suitable for wall mounting with bracket . including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

87

-

-

... More
Providing & fixing control Per cubic Metre transmission wiring in medium duty PVC Conduit between indoor and outdoor units. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
2C x 1.5 Per Square Metrem Cu Sheilded Cable

1200

-

-

... More
Corded Remote Wire

1140

-

-

... More
Supply, installation, testing & commissioning of IOT Based Central Controller capable of controlling of all IDUs, ODUs complete with necessary hardware, Software,accessories etc. IOT Based VRF Management Software which can be controlled from anywhere in the world & can be accessable through Smartphone , Tablet or PC . It should be connected with 16 Outdoor Unit + 80 Indoor Unit together with 1 system . The system should not have any yearly future licencing fees & the cost quoted should be for lifetime usage to perform the following functions Centralized control Control your entire VRF system or selected zones with one touch.Adjust temperature, fan speed and modes Simplified troubleshooting A clear error history, concise error description and follow-up.Smartphone alerts In the event of a critical malfunction.flexible user management Add users and custom access restrictions,Intuitive scheduling Plan operations ahead based on business hours.Individual controller lock Prevent inappropriate usage from occupants including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, Installation, testing and commissioning including vacPer cubic Metreiazation and Nitrogen testing of following nominal sizes of soft /hard drawn coppe rrefrigerant piping for VRV/ VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories except Y joint as per specifications etc. as required: including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19mm thick insulation

460

-

-

... More
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

575

-

-

... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

425

-

-

... More
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

565

-

-

... More
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

240

-

-

... More
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

150

-

-

... More
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

164

-

-

... More
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

216

-

-

... More
31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

105

-

-

... More
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation

80

-

-

... More
38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

125

-

-

... More
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation

260

-

-

... More
44.45 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation

50

-

-

... More
50.80 mm dia (OD) (Hard drawn) with tube thickness 1.62mmwith19mm thick insulation

100

-

-

... More
Supplying, installation, testing and commissioning of insulated Copper Refrigerant Y Joint for VRV piping complete as required. The insulation shall be 19mm thick NITRILE RUBBER . including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

87

-

-

... More
Supplying, Installation, Testing and commissioning of rigid UPVC drain Piping with elbows, T- joints, sockets duly insulated with 6 mm thick nitrile rubber insulation with adequate supports as per specifications and instructions of Engineer‐in charge including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
25 mm dia

605

-

-

... More
32 mm dia

500

-

-

... More
40 mm dia

50

-

-

... More
50 mm dia

10

-

-

... More
Supply and Installation of Hot-dip galvanised MS platform stand of adequate wightbearing capacity, should be safe for maintenace and installation work. It to be mounted on wall or Slab provided by Civil agency. Double rubber pads & galvanised MS plates for each leg. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

17

-

-

... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Thickness 0.63 mm sheet

1528

-

-

... More
Thickness 0.80 mm sheet

385

-

-

... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

10

-

-

... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

91

-

-

... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

11

-

-

... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

6

-

-

... More
16.18 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications.

58

-

-

... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold Per Setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
9 mm

1078

-

-

... More
13 mm

455

-

-

... More
Supply and fixing of Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 Per Kilogramme/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

384

-

-

... More
Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in  transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:INCOMER : 1 nos, 630 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.For Mains Transformer1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB.RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection.BUSBAR TPN aluminum bus bars of minimum of 1000 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.OUTGOING BREAKERS All outgoings feeders shall have ON/OFF/TRIP LED Indicating Lamp with 1 A SP MCB for protection. 2 Nos.200 Amp Three Pole Moulded Case Circuit Breaker of 25 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For Light Ckts 6 Nos. 100 Amp Three Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For Light Ckts 6 Nos. 63 Amp Three Pole Moulded Case Circuit Breaker of 10 KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For Light Ckts including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
OUTDOOR PANEL Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done in  transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram: INCOMER: 1 nos, 125 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 16 KA (ICS=ICU up to 433 V) completewith extended Rotary Mechanism and Spreader Link Per Set with microprocessor release for O/L, S/C & E/F protection.For Mains Transformer 1 No. Digital Multifunction meters with basic parameters like frequency, KW, KVA, KVAR, etc. shall be suitable for BMS function with Rs485 Port for Communication, complete with CTs and Protection MCB. RYB Phase Indication Lamps and ON/OFF LED Indicating Lamps with 2 Amp. SP MCB for protection. BUSBAR TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. OUTGOING BREAKERS 6 Nos.63 Amp Three Pole Moulded Case Circuit Breaker of 25KA (Ics = Icu upto 433 volt) breaking Capacity with Thermal Magnetic release for O/L & S/C protection and neutral link. For Light Ckts

1

-

-

... More
Supply and testing of Copper conductor XLPE. insulated PVC sheathed armoured Cable conforming to IS 7098 Part- 1 ammended upto date complete as per equirement at the site of work upto entire satisfaction of the Eingeer-in- charge. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
4 C X 35 Per Square Metrem copper Conductor cable.

30

-

-

... More
4 C X 25 Per Square Metrem copper Conductor cable.

30

-

-

... More
4 C X 16 Per Square Metrem copper Conductor cable.

30

-

-

... More
4 C X 10 Per Square Metrem copper Conductor cable.

30

-

-

... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Ten Loop Panel

1

-

-

... More
Two Loop Panel.

2

-

-

... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3

-

-

... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt rePer Set, acknowledge and silence switches complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

279

-

-

... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise Per cubic Metre fixed tempreature thermistor complete with base as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

9

-

-

... More
Supplying, installation, testing & commissioning of addressable phone control module complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

24

-

-

... More
Supplying, installation, testing & commissioning of addressable horn Per cubic Metre strobe complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

24

-

-

... More
Supplying & laying of 2x1.5 Per Square Metrem fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

3080

-

-

... More
Supply, Installation, Testing and Commissioning of UL / EN 54 Listed Addressable LPG Detector for the LPG Gas Bank complete with Module.It shall be connected to the fire alarm panel by use monitor modules and shall be UL/EN Listed.The detector shall be mountable on a wall or round support pole. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

8

-

-

... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : i) Horizontal mounted End Suction type fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 LPM against a total head of 70 M while running at 2900 RPM complete in all respect. ii) Squirrel cage, induction motor TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with synchronous speed of 2900 RPM with flexible coupling and coupling guard . iii) Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty). iv) Coupling and coupling guard for direct coupling of pump and motor. Main Fire Pump 2280 lpm at 70 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5Per Kilogrammef/cm 2 pressure at the highest/farthest point. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) i) Horizontal mounted end suction type fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 LPM against a total head of 70 M while running at 1800/2300 RPM complete in all respect. ii) Radiator cooled diesel engine of suitable BHP at 1800/2300 RPM for the above pump complete with standard accessories & suitable cooling system as described in specifications. iii) Common base plate for mounting pump & engine of requisite strength manufactured out of M.S. channels as per manufacture's recommendation with heavy duty Anti Vibration pads. (Cushy foot) (6 Nos., heavy duty) 2280 lpm at 70 m Head Note: * The head of the pump is selected in a manner so as to give a minimum 3.5Per Kilogrammef/cm 2 pressure at the highest/farthest point. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Providing and fixing exhaust for Diesel engine driven pump exhaust M. S. pipe class 'C' 150 mm dia including fitting like flanges, bends, reducers, etc. 50 mm thick fibre wool insulation aluminium cladding, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all respect as directed.

20

-

-

... More
JOCKEY PUMPS Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) i) Horizontal mounted end suction jockey pump having cast iron body, volute bronze impeller, stainless shaft capable of delivering 180 LPM against total head of 70 M while running at 2900 RPM complete in all respect. for testing of working of the pumping Per Set as required. ii) Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard . iii) Common bed plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 70 m Head including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
TERRACE PUMPS Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) i)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 ii) Suitable HP squirell cage induction motor TEFC type suitable for operation on ii)horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. iii) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. iv) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head (1W + 1 S) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel with Remote Start Stop Button ,of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade , cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for Terrace pump, Per Set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 54 With Canopy as required : Incomings 1 Nos 63A, 10 kA 4 Pole MCCB, Ics=100% Icu rating Digital Multifunction Meter & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Per Set of Copper Bus Bar 100 Amps 2 nos 40 A, 150 kA TPN MCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 10 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter- connection with suitable size copper conductorcable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump Per Set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required: INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Per Set of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, of following sizes of 1100 V grade Aluminium conductor armoured cables, XLPE insulated PVC sheathed, conforming to IS 7098 Part 1 complete as required as reqd including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
a) 3C x 25 Sq.mm.

40

-

-

... More
b) 3C x 95 Sq.mm.

40

-

-

... More
c) Control Cable 4 C x 1.5 sq.mm.

220

-

-

... More
d) 4C x 16 Sq.mm. (Main supply to Pane1)

120

-

-

... More
e) 3C x 10 Sq.mm. (For Terrace Pump Per Set)

60

-

-

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
150 mm width X 50 mm depth X 1.6 mm thickness

40

-

-

... More
300 mm width X 50 mm depth X 1.6 mm thickness

20

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Upto 35 sq. mm (clamped with 1mm thick saddle)

70

-

-

... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

20

-

-

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
3½ X 95 sq. mm (45mm)

8

-

-

... More
3½ X 25 sq. mm (32mm)

8

-

-

... More
Control Cable 4 C x 1.5 sq.mm copper conductor.

22

-

-

... More
4 X 16 sq. mm (25mm)

4

-

-

... More
3 X 10 sq. mm (22mm)

8

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

100

-

-

... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
150 mm dia (6.35 mm thick)

1200

-

-

... More
100 mm dia

100

-

-

... More
80 mm dia

170

-

-

... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
25 mm dia

375

-

-

... More
32 mm dia

230

-

-

... More
40 mm dia

200

-

-

... More
50 mm dia

63

-

-

... More
65 mm dia

90

-

-

... More
80 mm dia

188

-

-

... More
100 mm dia

33

-

-

... More
150 mm dia

16

-

-

... More
200 mm dia

21

-

-

... More
Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
25 mm

10

-

-

... More
32 mm

10

-

-

... More
40 mm

10

-

-

... More
50 mm

10

-

-

... More
65 mm

54

-

-

... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Single headed Stainless steel

18

-

-

... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required:.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Single headed Stainless steel

35

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
40 mm dia

4

-

-

... More
50mm dia

8

-

-

... More
65 mm dia

6

-

-

... More
80 mm dia

37

-

-

... More
100 mm dia

7

-

-

... More
150 mm dia

7

-

-

... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
50mm dia

5

-

-

... More
65mm dia

10

-

-

... More
80 mm dia

12

-

-

... More
100 mm dia

12

-

-

... More
150 mm dia

17

-

-

... More
200 mm dia

5

-

-

... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 Per Kilogramme/cm2 complete as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Providing, installation, testing and commissioning of Dual Plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required:.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
50 mm dia

8

-

-

... More
80 mm dia

2

-

-

... More
100 mm dia

2

-

-

... More
150 mm dia

4

-

-

... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200 mm dia .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required:Stainless Steel (Grade 304) .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

63

-

-

... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m

18

-

-

... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Stainless Steel (Grade 304) including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

44

-

-

... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
2 way-100 mm dia M.S. Pipe

8

-

-

... More
4 way - 150 mm dia M.S. Pipe

2

-

-

... More
3 way - 150 mm dia M.S. Pipe

2

-

-

... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement :4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design...including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

12

-

-

... More
Providing and fixing weather proof lockable cabinet of size not less than 0.60 mtr x 0.75 mtr (height) x 0.25 mtr made out of MS sheet of 16 gauge thickness having central opening and 4 mm thick glazed glass doors (Two Nos.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with two coates red colour. Over a two coats of primer. The cabinet shall be suitable to accommodate 2 Nos. 15 mtr long Hose pipe & 1 No branch pipe nozzle. It shall be mounted on raised Brick platform complete as required.(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer)..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

37

-

-

... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :.including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
Pendent Sprinkler

244

-

-

... More
Horizontal side wall sprinkler

56

-

-

... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

10

-

-

... More
Providing & fixing flow switch in following sizes M.S. pipe100mm dia including connection etc as required.

10

-

-

... More
Providing, fixing, testing & commissioning of installation control valve 80 mm dia of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required .including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

1

-

-

... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

-

-

-

... More
700mm

50

-

-

... More
1000mm

100

-

-

... More
1200mm

50

-

-

... More
1500mm

44

-

-

... More
Providing, fixing, testing and commissioning of drain test assembly complete with pipe, drain valve, test valve, sight glass, union, tee, elbow etc. complete with bolts, nuts, gasket, washers etc. as per NBC and as shown in the drawing...including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

9

-

-

... More
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0- 14 Per Kilogramme per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

20

-

-

... More
Providing & fixing of ISI marked (IS: 2878) portable Carbon-di-Oxide fire extinguisher of capacity 4.5 Per Kilogramme flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367...including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

36

-

-

... More
Providing & fixing of ISI marked (IS: 2878) Trolly type Carbon-di-Oxide fire extinguisher of capacity 22.5 Per Kilogramme flat base including valve discharge hose of not less than 10mm dia. meter complete in all respect including initial fill with Co2 gas confirming to IS 307-1966 and filled to filling ratio of not more than 0.367 ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Providing & fixing of ISI marked (IS: 13886) trolley mounted fire extinguisher, AFFF Mechnical foam type (gas pressurized) Capacity 50 liter complete in all respect...including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

4

-

-

... More
Providing & fixing of ISI marked (IS: 15683) portable ABC multipurpose type fire extinguisher, Capacity 6 Per Kilogramme complete..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

36

-

-

... More
SITC of LED type Fire EXIT signage board of size 600 mm x 300 mm made of Alunimium Extrusion alloy suitable for 230 V single ohase AC supply complete with wall/ceiling hnaging arrangement as required...including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

32

-

-

... More
11.5 Liters Capacity, Stainless steel Cylinder, welded, SS 304 grade. Suitable for 19 Bar working pressure and hydro tested on 35 Bar pressure duly Filled with 9.0 liter of Extinguishing agent -(Fire Extinguishing Foam Concentrate) .Cylinder consists with PVC dip-tube and strainer. Fitted with Brass ILP (Indirect Low Pressure) valve with integrated ball valve and lever monitoring, One outputs, including manometer for monitoring of Cylinder pressure.- 4 nos Contact Gauge in stainless steel casing, dial size 55 mm dia., pressure range - 0 to 40 Bar. Per Set point -17 bar, ingress protection - IP65 according to EN 60529/IEC 529, to display and monitoring of cylinder pressure and reporting of cylinder contents losses. Switching mode: Without pressure contact open (NC).- 4 nos Ceasefire Heat Sensor tube for automatic fire suppression system made by special modified Polyamide (PA), Color Black, High grade HR quality, UV Stabilized, Inner diameter 4mm, Outer Diameter 6 MM, Melting Point approx. 220 degrees Celsius when heating up with 10 K/minute, Steady load tested upto max. 80 deg C. The lowest operating temperature is stipulated at minus 40 deg C. Service Pressure 19 Bar, Burst Pressure at 20 Deg C approx 120 Bars, Release Temperature : Rapid heat increase in temperature at 15 bars pressure approx 150 Deg to 180 Deg C (Without Flame). 42 mtrs approx Ceasefire End of Line adapter for Pressure gauge fitting for Automatic fire suppression tube used for fitting at the end of the tube for pressurizing and re pressurizing the tube. Fitting made by brass (plated / unplated), Stainless steel, Elastomeric Sealings, Copper Nickle plated, Temperature range TS -20 Deg C till + 60 Deg C, Maximum working pressure 25 Bars, made as per PED Pressure Equipment Directives.- 4 nos Ceasefire End of Line Plug for Automatic fire suppression tube used for fitting at the tube end to terminate the point. Fitting made by brass nickel plated material with Elastomeric sealings, Temperature range TS -20 Deg C till 60 Deg C, Maximum working pressure 25 Bars, made as per PED pressure equipment Directives.- 10 nos Ceasefire T connectors for pressurized tubes, nickel plated material with elastomeric sealing, Temperature range TS -20 Deg C till + 60 Deg C, Maximum working pressure 25 Bars, made as per PED pressure equipment Directives. 14 nos Manual actuation Box, Size 130 x 130 4 nos x 55 mm deep, Powder coated Ivory/red/SS.- 4 nos Manual Release - Manual release/trigger is installed at the end of Heat Sensing tube and simulate a burst of the heat sensing tube when actuated.- 4 nos Agent discharge nozzle made of stainless steel body with S.S. protection cap for Wet Chemical based Kitchen Suppression system - 40 Deg. Full cone., -14 nos Agent discharge nozzle made of stainless steel body with S.S. protection cap for Wet Chemical based Kitchen Suppression system - 15 Deg. Full cone.,- 4 nos SS-304 Piping of 10mm outer diameter and 8mm inner diameter, suitable for 19 Bar working pressure complete with all necessary accessories e.g. connectors and fittings etc.2C x 1.5 Sq. mm Cable (Mtrs.)- 125 mtrs Solenoid operated ball Valve (25 NB) Normal Ball Valve 25 NB -1 lot NOZZLE -K-18 x 65 DEG (MVW) -1 lot GI PIPE 25 NB -1 lot Control Panel (Two Cross Zone Control Panel) -1 lot Conventional Sounder (Hooter)- -1 lot LHS Cable -1 lot Manual Release Switch -1 lot Gas Shut Off Valve - 32 NB -1 lot Programmable Relay upto 6 input 1 output -1 lot 24 V, DC Power adapter (Nos.) -1 lot

1

-

-

... More
Provoding ,fixing , testing and commissioning of DC EV CHARGER 3.3 KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC 380V±15% AC input frequency: 45-65Hz DC output power: 60KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-250 Amp Connectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi*OCPP 1.6 *7-inch LCD screen/LED light complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

5

-

-

... More
Provoding ,fixing , testing and commissioning of DC EV CHARGER 30KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 1 AC input voltage: AC380V±15% AC input frequency: 45-65Hz DC output power: 30KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 80A *1 plug Connectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi *OCPP 1.6 *7-inch LCD screen/LED light complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
STEAM AND SAUNA BATH- WELLNESS CENTER Supply, installation, testing & Commissioning of Steam generator (Make: Eurostan) • Temperature Sensor • Temperature Controller • Electronic Timer KW: 15 Specifications: • Powder coated GI shell. • Stainless steel (304 grade) water reservoir. • Heating elements are made from stainless steel (304 grade) for long life & high output. • High density PUF insulation. • Thermo fuse protected heating elements. • Stainless steel fuse protected heating elements. • Low water level cut-off to ensure heater safety. • Built – in water filter. • Safety pressure release valve. • Flexible hose connector for water feeding. • Ergonomic soft touch switches. • Illuminated controls. • LCD display. complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager . ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

2

-

-

... More
Supply, installation, testing & Commissioning of Steam room false ceiling: Aluminum composite panel false ceiling with powder coated aluminum channels Area: 7’ X 7.5’ (52.5 Sq. ft.) @ Rs.700.00complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supply, installation, testing & Commissioning of Steam room door: Frameless 10mm toughened, frosted glass on hinges, handle, water & magnetic seal. Area: 7’ X 2.5’ = 17.5 sq. ft. @ Rs.1100.00 complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . .

2

-

-

... More
Supply, installation, testing & Commissioning of Steam room vapor proof wall light complete in all respect as per specification and to the entire satisfaction of Engineer Incharge /Project Manager . .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

6

-

-

... More
Supply, installation, testing & Commissioning of Sauna Bath: (3280mm X 2060mm) Specifications. • 96mm X 12mm Thickness Tongue & Groove Grade “A” Spruce wood Interior walls, ceiling and flooring. Make: Finland. • Glass Wool insulation • Finish Series Heater with Lava Rocks. • Pre – Assembled Benches made of 1” X 4” Spruce wood. • Trim For Corners and Ceiling. • Standard Pre – Hung Sauna Door with 12” X 42” Hermetically Sealed, Tempered Safety Glass and Hardware. • Heater Guard. • Vapor proof Wall Light Fixture. • Head rests. • Magazine Stand. Area: 7’ X 9’ Height 7’ (350 sq. ft.) 350 sq. ft. @ Rs.1100.00 complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supply, installation, testing & Commissioning of Accessories Kit: Make: (Eurostan) • Wooden bucket with liner. • Ladle. • Thermometer. • Hygrometer. • Sand timer. • Sauna stone (Lava Stones) complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager . .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supply, installation, testing & Commissioning of Heater: 9 K.W. • Temperature Sensor • Temperature Controller • Electronic Timer complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supply, installation, testing & Commissioning of P4 Outdoor LED Cabinet : 576 x 576 / 960 x960 - Outdoor LED Screen - All Weather Proof- Nation Star Lamp 2121 - Diecast & Iron Cabinet,LED Unipole Structure LED Structure - 10 ft Pole & 6ft x 4 ft Screen Space - With Beutifi cation and ACP Clading Including foundation and base fabrication ,cloud controller TV2 for LED screen and all accessories. complete in all respect as per specification and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, installation, testing & Commissioning of Electromechnical Boom Barrier with maxium boom length of 6 mtrs, speed of 4 seconds and 100% duty cycle complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, installation, testing & Commissioning of 3D under vehicle scanning system UVSS along with ANPR and driver cemera as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, installation, testing & Commissioning of Hand held metal detector. as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supply, installation, testing & Commissioning of X-Ray Baggage Scanning system Dual View complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, installation, testing & Commissioning of Door frame metal detector 32 zone provides uniform detection and precise pinpointing. independent zone indicator lights on both sides panels identify not only height but also left , center and right locations for one or more objects passing through the archway . as per Drawing /specification .complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, installation, testing & Commissioning of Traffic Cones of 4.5 Per Kilogramme complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

15

-

-

... More
Supplying and Rodent Bait Station (SS Sheet 304 Grade) Standard size complete in all respect and to the entire satisfaction of Engineer Incharge/Project Manager ..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

100

-

-

... More
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

181

-

-

... More
Supplying, Installation, Testing & Commissioning of 10 passenger (680 Per Kilogramme ) MRL lift having contract speed of 1.00 MPS serving different floors in the lift shaft and having barrier free requirements as per Appendix-VII of CPWD General Specifications for Electrical Works ( Part-III-Lifts & Escalators), 2003 and as per detailed specifications enclosed as under :- Speed - 1.00 MPS Floors to be served - Ground + 3 Travel - 11 Meters ( approx.) Stops & Opening - Four (G + 3) on same side Machine: Gearless machine with permanent magnet synchronous motor.Controller - Modular control microprocessor system combined with variable frequency and variable voltage system which can be located in door column at the top floor Control - Variable frequency with closed loop vector control.Operation - Automatic, microprocessor based, duplex collective selective with / without attendant Power - 415 V, 3 Phase, 50 Hz, AC , 4 wire system Door Operation -Variable speed with close loop control.Type of doors Car Entrance - Glass Door Centre opening power operated horizontal sliding doors in stainless steel hairline finish Landing doors - Stainless steel in hairline finish with infrared door protection device.Clear Opening of Doors - 800 mm ( W) x 2000 mm ( H) Position of Machinery - To be placed directly above hoist way.Flooring - Vinyl Tile.Lighting - Diffused Lighting in car Signals :- Car operating panel in stainless steel, digital up down indicator, emergency light and alarm. Other Features - Battery Operated Emergency Light with Rechargeable Battery. Battery Operated Emergency Alarm with Rechargeable Battery Adjustable Guide Shoes Micro Movement L.E.D. Based Buttons System Capable of withstanding (+) 10% to (- )10% variation in supply voltage fluctuations Hands free press and speak intercom Steel items such as machine beams, door frames sill angles, fascia plates, spring buffers Full height infrared safety curtain with 74 intersecting beams Car platform constructed out of cold rolled grain oriented formed sheets of steel Fire man switch at main lobby Car false ceiling in stainless steel in mirror finish with concealed CFL lights Pit Ladder Motor tested for 180 starts per hour Automatic rescue device to automatically bring the elevator to nearest landing in case of power failure with SMF battery backup of 30 minutes. There shall be an automatic phase reversal correction device which will automatically align the supply phases in case of phase reversal Digital lift announcement system shall be provided in car only to give an audio visual confirmation of elevator arrival. However the visual indicators shall also be provided at each floor to indicate car position TRACTION SHALL BE BY MEANS OF FLAT POLYURETHANE COATED STEEL BELTS Complete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting into operation & final testing etc. as reqd. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Supplying, Installation, Testing & Commissioning of 6 person (408Per Kilogramme) Lift having contract speed of 1.00 MPS serving different floors in the lift shaft and having barrier free requirements as per Appendix-VII of CPWD General Specifications for Electrical Works (Part-III-Lifts & Escalators), 2003 and as per detailed specifications enclosed as under :- Speed - 1.00 MPS Floors to be served - Ground + 2 Travel - 10 Meters ( approx.) Stops & Opening -Three ( G +2 ) on same side MRL with polyurethane belt Machine: Gearless / Geared machine with permanent magnet synchronous motor.Controller - Modular control microprocessor system combined with variable frequency and variable voltage system which can be located in door column at the top floor Control - Variable frequency with closed loop vector control.Operation - Automatic, microprocessor based, duplex collective selective with / without attendant Power - 415 V, 3 Phase, 50 Hz, AC , 4 wire system Door Operation -Variable speed with close loop control.Type of doors (With Vision Panels)Car Entrance - Centre opening power operated horizontal / Vertical sliding doors in stainless steel hairline finish Landing doors - Stainless steel in hairline finish with infrared door protection device.Position of Machinery - To be placed directly above hoist way.Flooring - Chequred tile Lighting - Diffused Lighting in car Signals :- Car operating panel in stainless steel, digital up down indicator, emergency light and alarm. Other Features -Battery Operated Emergency Light with Rechargeable Battery. Battery Operated Emergency Alarm with Rechargeable Battery.Adjustable Guide Shoes Micro Movement L.E.D. Based Buttons System Capable of withstanding (+) 10% to (-) 10% variation in supply voltage fluctuations Hands free press and speak intercom Steel items such as machine beams, door frames sill angles, fascia plates,spring buffers Full height infrared safety curtain with 74 intersecting beams Car platform constructed out of cold rolled grain oriented formed sheets of steel Fire man switch at main lobby Car false ceiling in stainless steel in mirror finish with concealed CFL lights Pit Ladder Motor tested for 180 starts per hour Automatic rescue device to automatically bring the elevator to nearest landing in case of power failure with SMF battery backup of 30 minutes. There shall be an automatic phase reversal correction device which will automatically align the supply phases in case of phase reversal. Mechnical Rescue divice also need to be provided.Digital lift announcement system shall be provided in car only to give an audio visual confirmation of elevator arrival. However the visual indicators shall also be provided at each floor to indicate car position Complete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting into operation & final testing etc..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supplying, Installation, Testing & Commissioning of 08 passenger (544 Per Kilogramme ) NS/MRL lift having contract speed of 1.00 MPS serving different floors in the lift shaft and having barrier free requirements as per Appendix-VII of CPWD General Specifications for Electrical Works ( Part-III-Lifts & Escalators), 2003 and as per detailed specifications enclosed as under :- Speed - 1.00 MPS Floors to be served - Basement, Ground + 3 Travel - 20 Meters ( approx.) Stops & Opening - Five ( Basement, G + 3) on same side Machine: Gearless machine with permanent magnet synchronous motor. Controller - Modular control microprocessor system combined with variable frequency and variable voltage system which can be located in door column at the top floor Control - Variable frequency with closed loop vector control.Operation - Automatic, microprocessor based, duplex collective selective with / without attendant Power - 415 V, 3 Phase, 50 Hz, AC , 4 wire system Door Operation -Variable speed with close loop control.Type of doors Car Entrance - Centre opening power operated horizontal sliding doors in stainless steel hairline finish Landing doors - Stainless steel in hairline finish with infrared door protection device.Clear Opening of Doors - 800 mm ( W) x 2000 mm ( H) Position of Machinery - To be placed directly above hoist way.Flooring - Vinyl Tile.Lighting - Diffused Lighting in car Signals :- Car operating panel in stainless steel, digital up down indicator, emergency light and alarm. Other Features -Battery Operated Emergency Light with Rechargeable Battery.Battery Operated Emergency Alarm with Rechargeable Battery Adjustable Guide Shoes Micro Movement L.E.D. Based Buttons System Capable of withstanding (+) 10% to (- )10% variation in supply voltage fluctuations Hands free press and speak intercom Steel items such as machine beams, door frames sill angles, fascia plates, spring buffers Full height infrared safety curtain with 74 intersecting beams Car platform constructed out of cold rolled grain oriented formed sheets of steel Fire man switch at main lobby Car false ceiling in stainless steel in mirror finish with concealed CFL lights Pit Ladder Motor tested for 180 starts per hour Automatic rescue device to automatically bring the elevator to nearest landing in case of power failure with SMF battery backup of 30 minutes. There shall be an automatic phase reversal correction device which will automatically align the supply phases in case of phase reversal Digital lift announcement system shall be provided in car only to give an audio visual confirmation of elevator arrival. However the visual indicators shall also be provided at each floor to indicate car position TRACTION SHALL BE BY MEANS OF FLAT POLYURETHANE COATED STEEL BELTS Complete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting into operation & final testing etc. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
AIR SOURCE HEAT PUMP FOR GENERATING HOT WATER & HYDROPNEUMATIC SYSTEM TECHNICAL SPECIFICATIONS FOR EACH UNIT Hot water rated ouput volume - 1000 Lph Power Supply V/Ph/Hz : 400~440V/3 PH/50Hz Suggested Maximum output water temperature in Deg C : 55 ⁰ to 60⁰ C ambient temperature range in Deg C : -5 ⁰C~43 ⁰C Type of Fan : Low Noise axial fan Suggested Noise level: DBA 66 Suggested COP: 4.00 (Technical detail as per attached Annexure - I to be filled. Technical details and shop drawings to be approved before procurement) .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Providing, fixing ,testing and commissioning the Hot Water Storage Tank of following Capacity consisting of S.S 304/316 Horizontal cylindrical shape clarifier tank. (inlet temperature of hot water storage tank 60-65 deg.C) suitable for minimum 5 bar working pressure. Tank shall be provided with water flow meter, inlet / outlet, overflow, drain connection with MH cover, 6 mm thick SS tank, pressure relief valves, pressure gauge at inlet / outlet with isolation cock, thermometer at inlet / outlet, ball Valve, safety valve,check valve etc. The complete system to be tested to a pressure of 10 Per Kilogramme/cm2 complete in all respects including temperature indicatiors, thermostat and other required accessories. Tank shall be insulated with 100 mm thick crown 150 grade & 50 mm rock wool pads of approved quality and cladded with 24 SWG aluminium sheet cladding.TANK CAPACITY - 3000 Ltr. .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Providing, fixing ,testing and commissioning suitable complete horizontal/ vertical multistage centrifugal pumping Per Set having stainless steel (SS 304) impellers & shaft and single mechanical seal with pumps suitable for 415 Volts, 3 Phase 50 cycles A.C Supply complete with all standard accessories including , M.S.channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, pressure gauges with stop cock and dial type thermometer on suction or discharge.(suitable for hot water temperature up to 85 deg C.) The pump complete with Control Unit Panel for automatic Cold & Hot water circulation, manifolds , as per the approval of Project-in-charge complete with base frame, necessary foundation as per requirement .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . No of Pump - 2 (1W+1S) Flow - 1000 LPH Per Pump Head - 15 M .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Electrical Panel: (Wellness Water Supply & Heat Pump)Supplying, installation, testing and commissioning of OUT DOOR M.S fabricated power coated electrical control panel main switch Ampere Voltage Frequency indicator Per cubic Metre controller, MCCB for Heat pump, DOL Starter for recirculation pump and & Hydropneumatic Pump ,Submersible pump Per Set, Raw water etc for with contactors and over load relay, ON/OFF switch Heat pumps and recirculation pumps. 63 amp rating TP Module case circuit brakers with neutral link, 4 Bars tinned Aluminium bus bar, LED Type induction light, TIC (temperature indicator controller for tank with sensor), 63 amp TPA MCCB for heat pump with indicators, Auto dual starter motor and pump. Each shall have Auto / Manually selected switch overload relay, single /three phasing preventor, ON/OFF trip indicator lamp and timer for recirculation pump,Hot water return pump& cold water supply pump complete in all respects and other accessories to make the item operationable. All outgoing feeders shall have ON/OFF Trip LED indication INCOMER:-1 Nos. 200 Amps. 4P MCCB (20 KA) MCCB with variable current Per Settings 1 Per Set phase indication lights (R, Y B ) with 6A control SP MCBs 1 Per Set 3 phase Digital Multi function meter to read V, A, F, kW, PF, Kwh with CT's BUS BARS: 250 AmpsTPN aluminium bus bars with heat shrinkable coloured sleeves OUT GOINGS:2 No 63 Amp 4 pole MCB for Heat Pumps Suitable capacity Motor Protection Circuit Breaker suitable for Recirculation Pump along with Direct online starter ,Over Load Relay & contactor -01 Per Set.Suitable capacity Motor Protection Circuit Breaker suitable for Raw water Pump along with Direct online starter/ star Delta ,Over Load Relay & contactor -1 Per Set.Suitable capacity Motor Protection Circuit Breaker suitable for Clear Water Transfer Pump along with Direct online starter ,Over Load Relay & contactor -1Per Set.Suitable capacity Motor Protection Circuit Breaker suitable for Submersible Pump along with Direct online starter/ Star Delta ,Over Load Relay & contactor -1Per Set.TIC (temperature indicator controller for tank with sensorand digital timer )Auto dual starter motor and pump. Each shall have Auto / Manually selected switch overload relay, single /three phasing preventor, ON/OFF trip indicator lamp and timer for Hot water return pump & clear water supply pump complete in all respects and other accessories to make the item operationable .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supplying of following size XLPE insulated, PVC sheathed copper conductor cable for rated voltage of 1100 volts grade conforming to IS :7098 (part-1)/88 with amendment no. 1 armored with galvanized steel strip (ISI mark) .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
4 core x 10 Per Square Metrem

20

-

-

... More
3 core x 6 Per Square Metrem

200

-

-

... More
3 core 4 Per Square Metrem

10

-

-

... More
3 core 2.5 Per Square Metrem

10

-

-

... More
Supply, Installation, Testing & Commissioning of complete composite hydropneumatic system consisting of horizontal /vertical multistage centrifugal pump having stainless steel SS-304 stage casing and SS 304 impellers with stainless steel SS-304 shaft as per IEC standards and GJL250 cast iron suction & discharge casing with single mechanical seal and pressurised tank of suitable capacity as per manufacturer calculation, complete with all standard accessories including pressure switch, pressure gauges, non-return & isolating valves on suction and delivery side with nuts, bolts & washer including mild steel flanges, where ever required with 3 mm thick rubber insertion, with necessary protection and operational devices i.e alternate pumping operation and shut-off during dry running conditions etc. with suitable electrical motor to be operated on 210/220 OR 400/440 volt 50 cycle AC supply, suitable for following duty and with total no. of pumps - 2 nos.(1 working+1standby) complete with Control Unit Panel, manifolds & chassis, as per the approval of Project-in-charge complete complete with M.S fabricated base frame, nuts and bolts bolted to cement concrete foundations complete as per requirement.Total No of Pump 2 nos (1W + 1S ) Flow - 192 LPM Per Pump Head -15 M .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, Installation, testing and commissioning of Vertical Multi-Stage in-line Pump, flow rate 25.6 m3/hr (426 LPM), with connection Size 50mmX 50mm coupled with IE3 Motor 5.5kW/7.5 H.P/2900 RPM . Impeller, casing ,shaft and Sleeve MOC -SS.(01 WPer Kilogramme + 01 Stn-by). complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, Installation, testing and commissioning of Dual Media Filter Capable to accommodate a maximum Flow Rate of 25M3/Hr @ filtration Velocity of 50m3/hr/m2. Made of MS vessel of 1200 mm rubber lined Dia 6 mm Shell and 08 mm Dished Ends , bed Plate of 10 MM thickness with push Fit Strainers. with Initial charge of Anthracite and Multi grade Filter Media(Silica and Sand Media of Granulometry upto 0.4 to 06 mm ). Vessel Complete With Face Piping of 90 mm and Valve System of Sir/Kartar/Zolotto Make . HOS 1750 mm and Total Height 2150 mm. Vessel Make : PENTAIR complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, Installation, testing and commissioning of Activated Carbon Filter Capable to accommodate a maximum Flow Rate of 25M3/Hr @ filtration Velocity of 50m3/hr/m2. Made of MS vessel of 1200 mm Dia 6 mm Shell and 08 mm Dished Ends .ACF Shall be comprising of Activated Carbon of IV 1000. Vessel Complete With Face Piping of 50 mm and Valve System of Sir/Kartar/Zolotto Make BFV. HOS 1750 mm and Total Height 2150 mm.Vessel Make : PENTAIR complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, Installation, testing and commissioning of UV system made in SS-316 Chamber, of Flow Rate 30 M3/Hr. Make Alfa/Ozone complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager .including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings ( bends,Tees,Reduction Tees,End Cap etc as per site re This includes jointing of pipes & fittings with one step CPVC solvent cement, testing of joints complete as per direction of Engineer-in- Charge.Scope shall also include excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. The pipe shall not be less than 750 mm below ground level at any point..including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
65 mm nominal dia Pipes

737

-

-

... More
80 mm nominal dia Pipes

428

-

-

... More
100 mm nominal dia Pipes

770

-

-

... More
150 mm nominal dia Pipes

744

-

-

... More
200 mm nominal dia Pipes

696

-

-

... More
300 mm nominal dia Pipes

148

-

-

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required and the same have to be installed in the UPVC pipes as detailed above :.including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
50mm dia

28

-

-

... More
65mm dia

2

-

-

... More
80 mm dia

40

-

-

... More
100 mm dia

73

-

-

... More
150 mm dia

36

-

-

... More
200 mm dia

26

-

-

... More
300 mm dia

30

-

-

... More
Providing, installation, testing and commissioning of flanged non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required and the same have to be installed in the UPVC pipes as detailed above ::including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
50 mm dia

26

-

-

... More
100 mm dia

52

-

-

... More
200 mm dia

14

-

-

... More
300 mm dia

14

-

-

... More
Providing, installation, testing and commissioning of Vertical Type Check Valve, Vertical Non-return Valve of following sizes complete with rubber gasket, Gl bolts, nuts, washers etc.as required and the same have to be installed in the UPVC pipes as detailed above :100 mm dia including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

38

-

-

... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
100 mm dia

16

-

-

... More
200 mm dia

8

-

-

... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
100 mm Dia

41

-

-

... More
80 mm Dia

36

-

-

... More
65 mm Dia

42

-

-

... More
50 mm Dia

25

-

-

... More
Providing and Fixing resilient rubber Anti-vibration Pads 80/65 mm including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

12

-

-

... More
Providing and Fixing CI Dual Plate Wafer Check Valve (NRV) 50 NB including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

4

-

-

... More
Supply , Installation and Commissioning of UV system made in SS-316 Chamber, of Flow Rate 30 M3/Hr. Make Alfa/Ozone including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Supply, Installation, testing and commissioning of Submersible Pump Per Sets suitable for borewells with 300 mm having 3 star or above rating confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc. complete for 6" Bore well. Pump Bowl to be of SS 304 material and Impeller to be casted impeller or fabricated impeller conforming to SS 304 material and Rotor to be of Copper. with cable complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager Flow Rate of 20 m3/hr@100 mtrs head.(9.3 k W/12.H.P including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

1

-

-

... More
Designing, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head)Single/multistage centrifugal monoblock pumping Per Set with Cast Iron impellors, Carbon steel Pump shaft, base plate, Gland Packed seal , connected to TEFC Ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE. The pump inclosure to be minimum IP 44 / IP 55 rated and insulation class to be B / F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency.The pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the site and by the Engg-in-charge.The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructions.The pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operation. Low level water indiactor also be provided in the UG tank for automatic opeartion of the pumps tp maintain required level of water. Cost of all the required cabling and associated accessories shall e included in the cost and nothing extra shall be paid on this account. FOR 250 KL UG TANK CENTRIFUGAL MONO-BLOCK PUMP With 20 H.P capacity (Model KDS -2030++, of Kirloskar Pumps or as approved by engineer / Consultant) No of Pumps :- 2 (1w + 1s) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

2

-

-

... More
Designing, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head) Single/multistage centrifugal monoblock pumping Per Set with Cast Iron impellors, Carbon steel Pump shaft, base plate, Gland Packed seal , connected to TEFC Ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with filled pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE. The pump inclosure to be minimum IP 44 / IP 55 rated and insulation class to be B / F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency.The pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the site and by the Engg-in-charge..The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructions The pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operation CENTRIFUGAL MONO-BLOCK PUMP With 7.5 H.P capacity (Model KDS -822++, of Kirloskar Pumps or as approved by engineer / Consultant) including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
Spider Slide No of Pumps :- 5 (4w + 1s) Water flow rate 1000 LPM @ 18 m. Head

1

-

-

... More
32" Open Body Slide & 32 " Closed Body Slide No of Pumps :- 2 (1w + 1s) Water flow rate 1500 LPM @ 12 m Head CENTRIFUGAL MONO-BLOCK PUMP With 5 H.P capacity (KDS515+/KDS-520+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)

2

-

-

... More
Kids Fun K2 No of Pumps :- 3 (2 w + 1s) Water flow rate 2500 LPM @ 6m Head

1

-

-

... More
96" Family Slide No of Pumps :- 2 (1 w + 1s) Water flow rate 1500 LPM @ 6 m Head

1

-

-

... More
Rain Dance (Jungle Theme) No of Pumps :- 3 (2 w + 1s) Water flow rate 1500 LPM @ 6 m Head CENTRIFUGAL MONO-BLOCK PUMP With 3 H.P capacity (KDS 314+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant) 23 " ML(06 Lane)

1

-

-

... More
No of Pumps :- 3 (2 w + 1s) Water flow rate 1000 LPM @ 6m Head

1

-

-

... More
Tots Activity No of Pumps :- 5 (4 w + 1s) Water flow rate 1000 LPM @ 6m Head CENTRIFUGAL MONO-BLOCK PUMP With 12.5 H.P capacity (KDS-1331+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)

1

-

-

... More
Water Play Station (MPWPS) No of Pumps :- 6 (5 w + 1s) Water flow rate 2000 LPM @ 14 m Head

1

-

-

... More
CENTRIFUGAL MONO-BLOCK PUMP With 20 H.P capacity (KDS-2030+, of Kirloskar Pumps or equivalent as approved by engineer / Consultant)

20

-

-

... More
For Lazy River Designing, Supply, installation , testing & commissioning Twin headed (Commom suction and discharge head) Single/multistage re- circulation pumping Per Set with Highly chemical resistant with all metal internal components being Stainless Steel., Mechnical seal , connected to TEFC Ventilated induction motor , suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply with pressure gauge , vibration elimination pads, dry run protection etc. complete with base and frame, nuts,anchors and bolts. The pump should be rated at the premium efficiency rating of IE 2. The pump inclosure to be minimum IP 55 rated and insulation class to be F. The vender shall submit performance curve, GA drawing and technical data sheet to the consultant prior to installation. The pump shall be capable to work with a negative suction of upto 5 mtr. without any lag in the efficiency. The pump Per Set assembly should haver CE and TUV approval The pump shall be assembled for Twin headed (Commom suction and discharge head) circulation pump and shall include the cost of Stainers, NRVand Valves etc and all other accessories required for the proper completion of the work as desired on the site and by the Engg-in-charge.The pump shall work in (W +S) mode as per details given below:-The pump shall be installed on suitable RCC foundations and with anti-vibration pads complete as per requirement and as per instructions The pumps shall work in cyclic operation with auto switching feature after every 4 hours and in the event of failure of any pump the other pump shall automatically start operation PUMPS ARE TO BE INSTALLED IN PUMP ROOMS AS INDICATED IN THE DRGS PUMP With 10 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant) Lazy River & Wave Pool No of Pumps :-3 (2 w + 1s) ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

-

-

-

... More
Water flow rate 120 cb mtr/hr @ 14 m Head PUMP With 5.5 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant) Water Play Station No of Pumps :-3 (2 w + 1s)

2

-

-

... More
Water flow rate 80 cb mtr/hr @ 12 m Head PUMP With 3 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant) Tower D & Toddlers Fun Area No of Pumps :- 2 (1 w + 1s)

1

-

-

... More
Water flow rate 33 cb mtr/hr @ 12 m Head PUMP With 4.5 H.P capacity (Make : Pentair , USA/ Aquapac, Australia/Haywards, USA or equivalent as approved by engineer / Consultant) Tower C No of Pumps :- 2 (1 w + 1s)

2

-

-

... More
Water flow rate 55 cb mtr/hr @ 14 m Head

2

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capa Supply, Installation, testing and commissioning of of the Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capa below mentioned detailed specifications, complete with Frontal Pipe work comprising of 140 NB butterfly valves for Filter, Rinse, Backwash, Recirculate , By pass and Close functions.Vessel Make : Pentair , USA/ Aquapac, Australia/Haywards, USAl Make : PENTAIR complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. . Wave pool & Lazy River

-

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 2000 mm Dia capable to cater a flow rate of 124m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Water Play Station

3

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 1600 mm Dia capable to cater a flow rate of 80m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Tower D &Toddlers Fun Area

2

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 960 mm Dia capable to cater a flow rate of 32m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Tower C

3

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 1200 mm Dia capable to cater a flow rate of 55m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager Tower A

1

-

-

... More
Bobbin Wound Multi-grade filter made of Fibre Glass Thermoplastic Resin of 650 mm Dia capable to cater a flow rate of 15m3/hr @ 2.5 bar pressure @50m3/hr/m2 filtration velocity i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager

1

-

-

... More
Chemical Dosing system Supply, Installation, testing and commissioning of Chemical Dosing System complete with Electronic Dosing Pump, Injection Pipes For Disinfection, Coagulation, and pH Correction @ 0-10 LPH with manual Agitator & HDPE Solution Tanks complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : Aqua, Italy/ Seko/Nuton, USA or equivalent as approved by engineer / Consultant) i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

20

-

-

... More
Filter Media Supply, Installation, testing and commissioning of Multi-grade Filter Media Comprising of Silica and Gravel with Granulometry in-between 0.2mm to 06 mm. complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : as approved by engineer / Consultant) i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

21310

-

-

... More
Floor Inlet Nozzles-diffusor type Supply, Installation, testing and commissioning of Floor Inlet Nozzles-diffusor type (And VacPer cubic Metre Points) Made of ABS capable to cater a flow rate of 7m3/hr complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : Pentair, USA/Astral Spain (30 Nozzles+ 05 VacPer cubic Metre Point) or equivalent as approved by engineer / Consultant) i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

216

-

-

... More
Cleaning Per Set Supply, Installation, testing and commissioning of Cleaning Per Set Comprising of Anodised Alluminium VacPer cubic Metre Head, VacPer cubic Metre Hose 30 mtrs Length , Deep Bag net, Flat net, Curved Brush, Straight Brush, Algae Brush and Telescopic Pole complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : as approved by engineer / Consultant) i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

4

-

-

... More
UV stabilised Supply,Installation, testing and commissioning of Modular Overflow Grating made in UV stabilised of 295 mm Width , suitable for reversible curves. complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager.i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

372

-

-

... More
UV Sterilizers Supply, Installation, testing and commissioning of UV sterilizer in SS-316L housing, with built-in ballast to ensure a smooth power supply, 35% more UV-C yield as a result of reflection by the interior. Flow 60 m3/hr, maximum pressure 2 Bar. 130W, 220V AC, 50 Hz. complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager. (Make : Pentair, USA/Astral Spain (30 Nozzles+ 05 VacPer cubic Metre Point) or equivalent as approved by engineer / Consultant) i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

10

-

-

... More
Wide Throat Skimmer Box Supply, Installation, testing and commissioning of Wide Throat Skimmer Box For Suction of Water. complete in all respecti/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager i/c carriage of material in all leads and lifts of Engineer Incharge / Project Manager ncluding carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

10

-

-

... More
SITC of composting machine of organic waste system of 50Per Kilogramme per day, Machine Size (L x W x H) in meter : 2.35 x 0.93 x 1.68, Power : 8 HP, Waste Treatment Capacity : Up to 50 Per Kilogramme/day, All Wetted Parts : Stainless Steel SS 304, Operation : Fully Automatic., Volume Reduction : Up to 80-90%., Shredder : Built-in, Power requirement Three phase 415 V, 63 A connections with earthing and neutral, as per technical specification including civil works of required shed and foundation base (Smartenviro/Excel/Tanco or equivalent or as per the direction of site including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .

3

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.