Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation Tender
Civil And Construction
Road Construction
Eprocure
Opening Date6 Jan 2024
Closing DateCancelled
Tender Amount₹ 89,70,00,000
Costs
EMD
₹ 89,70,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Beautification Of Palampur And Nagrotabagwandisttkangra Himachal Pradesh
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPTDB_83606_1Tender No
SITDP-HP_W02/2023-24Tender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in surface excavation for all kind of soil, that not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 Per Square Metre on plan including getting out and disposal of excavated earth upto all lead and lift as directed by Engineer-In-Charge:
150
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto site of waste. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
306.4
-
-
Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
730.84
-
-
Clearing grass and removal of the rubbish up to periphery of the area cleared and disposal it at approved dumping site upto all lead & lift as per direction of Engineer incharge.
15000
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
39
-
-
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diaMetre holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to
match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
1332.84
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
634.02
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
3191.75
-
-
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20mm nominal size) ornamental works including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
53.3
-
-
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size)including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
150.93
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7Per Kilogramme per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
150.93
-
-
Providing under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
371.69
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
1091.51
-
-
Providing and laying RCC M 25 mix design (1:1:2) as Per IS-10262-2009 and curing complete excluding Cost of form work and reinforcement upto all heights including carriage of material upto leads and lifts:
-
-
-
Foundation and plinth.
4830.71
-
-
All works above plinth level upto floor V level
1647.39
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. - All work up to plinth level :
27.15
-
-
Providing and laying RCC M 40 mix design and curing complete as per structural drg, design and specifications and excluding cost of form work and reinforcement including carriage of materials up to all leads & lifts and as per direction of Engineer In charge.
-
-
-
Foundation footings bases of columns and the like and mass concrete.
1221.71
-
-
Column, pillars, posts and struts upto floor two level :
-
-
-
Independent piers, columns and pillars upto floor two level.
528.53
-
-
Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level :
956.84
-
-
Lintels, beams girders bressumers and cantilevers upto floor two level :
839.15
-
-
Suspended floors roofs landings and shelves and their supports, balconies, beams girders, bressumers and cantilevers upto floor two level.
1420.56
-
-
Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.
82.2
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling in all height and removal of the same for in situ-reinforced concrete & plain concrete work as per the pattern specified including pointing, rendering and including cost & carriage of materials up to all lead & lift complete and as per direction of Engineer in charge
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns and mass concrete.
33640.71
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
8762.06
-
-
Suspended floors, roofs, landings, balconies and access platform
16121.93
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
5392.4
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
5211.09
-
-
Stairs, (excluding landings) except spiral staircases
230.04
-
-
Arches, domes, vaults up to 6 m span
12.6
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
1534.52
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
399.75
-
-
Providing form work of ordinary timber plankings so as to give a rough finish i/c centring, shuttering,strutting & propping etc. ht.of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :-
-
-
-
Arches beyond 6.00 mts.span
86.3
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(TATA/Sail/Jindal Make or equivalent ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
938811.44
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more..(TATA/Sail/Jindal Make or equivalent ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
184261.63
-
-
(2nd class) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
27.43
-
-
(2nd class) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
1528.02
-
-
(2nd class) Half brick masonry using common burnt clay building bricks in cm 1:4 (1 cement:4 sand) in foundation and plinth including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
243.08
-
-
(2nd class) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
827.57
-
-
Extra for providing and placing in position 2 Nos 10mm dia. M.S. bars at every third course of half brick masonry.
708.99
-
-
(2nd class) Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor V level including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
33.24
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
1496.19
-
-
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : One face dressed White sand stone / Bond stone including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
114.65
-
-
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : White sand stone / Grey sand stone including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
161.19
-
-
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : riangular or Square or rectangular pillars
161.19
-
-
Extra for stone work ashlar sunk or moulded in cornices
1791
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
-
-
-
(b)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in Per Square Metre. up to two decimal places.
5
-
-
Providing wood work in frames of doors, windows, clerestory, window and other frames wrought, framed and fixed in position including carriage of material up to all lead & lift and as per direction of Engineer in charge .Second class deodar wood.
10.17
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright inished of required size with necessary screws including carriage of material up to all lead & lift and as per direction of Engineer in charge.Second class deodar wood.(35 mm thick)
163.77
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) ecorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including carriage of material up to all lead & lift and as per direction of Engineer in charge 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
67.73
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). including carriage of material up to all lead & lift and as per direction of Engineer in charge
63.53
-
-
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws. including carriage of material up to all lead & lift and as per direction of Engineer in charge Second class deodar wood.(35 mm thick)
119.49
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material up to all lead & lift and as per direction of Engineer in charge
-
-
-
40 mm thick including ISI marked Stainless Steel (304 grade) butt hinges with necessary screws
145.95
-
-
Providing and fixing bright finished stainless steel (304 grade) tower bolts (barrel type) with necessary screws etc. complete including carriage of material up to all lead & lift and as per direction of Engineer in charge make Dorma/Hettich or equivalent
-
-
-
250x10 mm
109
-
-
200x10 mm
82
-
-
150x10 mm
24
-
-
Providing and fixing ISI marked stainless steel (grade-304) sliding door bolts with nuts and screws etc. complete : 250x16mm including carriage of material up to all lead & lift and as per direction of Engineer in charge make Dorma/Hettich or equivalent
21
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaMetre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
282
-
-
Providing and fixing stainless steel (grade-304) handles with screws etc. complete: including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
-
-
-
125 mm
85
-
-
100mm
21
-
-
Providing and fixing bright finished stainless steel (304-grade) hanging type floor door stopper with necessary screws, etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
31
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
99
-
-
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming ollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames and carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
31.5
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5 mm thick including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
592.33
-
-
Providing and fixing 40mm thick plain framed panelling with 20mm thick panel and 40mm thick styles & rails, in Second class seasoned deodar wood with necessary wooden plugs & screws priming coat on unexposed surfaces etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
53.16
-
-
Providing and fixing 12 mm thick second class seasoned deodar wood plain skirting with butt jointing and screws (frame work and cover fillets to be measured and paid for separately) with. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
5.89
-
-
Providing and fixing 75 mm x 60 mm rounded hand rails in straight length complete in 1st class deodar seasoned wood including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
80
-
-
Providing and fixing plain square edged cover fillets (beading) 60mm x12mm section with wood screws in ceiling and lining including mitring at junction and making chamfered edges of beading as per Approved Design and drawings including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
143.46
-
-
Providing and fixing 40mm thick Second Class deodar seasoned wood panelled or panelled and glazed shutters for doors windows and clerestory windows with 5mm thick glass including brass butt hinges with necessary screws, cost of Glass will be paid & measured seperately with including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
6
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
36
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete having size 250x10. mm.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
4
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogramme to 80 Per Kilogramme and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
20
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
47
-
-
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
12.6
-
-
Providing and Fixing factory made uPVC door & partition frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed withplastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm),including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
18.72
-
-
Providing and fixing factory made uPVC white colour casement/casement Per cubic Metre fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
111.1
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
222.2
-
-
Providing and fixing factory made uPVC white colour casement/ Casement Per cubic Metre fixed glazed door comprising of uPVC multi- hambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
6.3
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Per Kilogramme), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
111.1
-
-
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 Per Kilogramme), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable
12.6
-
-
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement door/window with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
13
-
-
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
30
-
-
Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
30
-
-
Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
5
-
-
Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
5
-
-
Providing and fixing toughened glass panes of 5.50 mm thickness (weight not less than 13.75Per Kilogramme/Per Square Metre). in aluminium/uPVC door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Frame work shall be paid seperately) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
463.3
-
-
Providing and fixing 8mm thick cement bonded particle board (bison board) partitions with butt jointing and nails, (frame work and cover fillets to be measured and paid for separately). including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
30
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
2808.65
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.. (Cost of aluminium snap beading shall be paid in basic)
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 Per Kilogramme/ Per Square Metre)
573.22
-
-
Filling the gap in between aluminium/uPVC frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
500
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of Saint Gobain brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.(Door handle, lock and stopper etc.to be paid separately).
4.2
-
-
Providing and fixing 12 mm thick frameless toughened glass partition/railing of approved brand and manufacture, including providing and fixing top & bottom fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
268.6
-
-
Providing and fixing 8 mm (weight not less than 20.00 Per Kilogramme/Per Square Metre) thick frameless toughened glass partition/railing of approved brand and manufacture, including providing and fixing top & bottom fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
60
-
-
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.(make- Tata/ SAILor equivalent )
17935.52
-
-
Steel work welded in built up/ Hollow sectionss, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint, including carriage of material up to all lead and lift and as per direction of Engineer in charge. (make- Tata/ SAILor equivalent )
-
-
-
In trusses and trussed purlins in building including carriage of material in all lead & lift.
160186.19
-
-
In gratings framed guard bars,ladders,railling,brackets and similar works
142930.01
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-In- Charge.including carriage of material by mechanically & manual upto all lead & lift .
1000
-
-
Providing and fixing hand rail or frame of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. with cast aluminium
24502.5
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 Per Kilogramme of cement or as per manufacture’s specifications.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
7752.3
-
-
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade white colour or approved colour by Engineer incharge.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
1256.13
-
-
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
1573.79
-
-
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 10 mm including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer.
4722
-
-
Providing and fixing 18 mm thick gang saw cut,mirror polished, premoulded and repolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels.including carriage of material by mechanically & manual upto all lead & lift and Granite of any colour and shade (jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.) as per direction of Engineer.
39.34
-
-
Providing and laying Lapatto Granite stone flooring in stair case required design and patterns, as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing complete including carriage of material by mechanically & manual upto all lead & lift and Lapatto Granite stone slab (jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.) as per direction of Engineer.
1630.55
-
-
Providing bull nose moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.( in Granite work/ Marble work/ Kota work)
799.86
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
303.11
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make Nitco/ kajaria or equivalent, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing withgrey cement slurry @ 3.3Per Kilogramme per Per Square Metre, including pointing in white cement mixed with pigment of matching shade complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
889.09
-
-
Providing and laying mirror polished Kota stone slab flooring 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and 20 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:4 (1 cement :4 sand). including rubbing and polishing complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
100
-
-
Providing and fixing 25mm thick plain lining deodar seasoned wood wooden plank ceiling with tongued and grooved jointing and wood screws, second class deodar wood for frame work and cover fillets with necessary screws complete as per detailed design & techanical specifications, .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
34.14
-
-
Providing and fixing 1st quality ceramic glazed floor tiles 450X450X10mm conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make Nitco/ kajaria or equivalent, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Per Kilogramme per Per Square Metre including pointing in white cement mixed with pigment of matching shade complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
48
-
-
Providing and laying Nitco/ kajaria or equivalent rectified Glazed Ceramic floor tiles of size 300x300X8mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including pointing the joints with white cement and matching pigments etc., complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
278.43
-
-
Providing and laying Nitco/ kajaria or equivalent Double charged digital vitrified floor tiles Size of Tile 600mm x 600mm x12mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including grouting the joints with white cement and matching pigments etc., complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
401.19
-
-
Providing and laying Nitco/ kajaria or equivalent Vitrified tiles in size of (600mmx600)x(10 to12)mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogramme/ Per Square Metre including grouting the joint with white cement & matching pigments etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
50
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the rchitectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
1891.57
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified andincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
683.08
-
-
Providing and laying Slate size (300x200)mm, with 15mm average thick slate flooring, 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
60
-
-
Providing and laying 20mm thick granite stone in flooring/RCC counter/tread of the steps with nosing etc.,on 20mm (average) thickness base of cement mortar 1:4(1cement: 4 sand) and 20mm thick granite in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
64.31
-
-
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per Per Square Metre including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Per Square Metre) i.e. 50 mm long, 8 mm outer diaMetre M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron periMetre wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1971.65
-
-
Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately): including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 12 mm thick
1082.7
-
-
Providing and Installing Saint-Gobain CertainTeed Roofing includiing roofing Shingles (The shingle should conform to the following standards: 1.Construction–3 piece laminated fiber glass construction. 2.ASTMD3081–Asphalt shingles combined with Glassfelt and surfaced with Mineral granules. 3.ASTME108–Class A fire resistance. 4.ASTMC3161 – For 110Mph wind resistance), Fiber Cement Board Cement Board thickness 16mm , size 1220mm X 2440mm and roof runner; complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2527.31
-
-
Providing and applying Saint-Gobain Certain Teed Shadow Ridge–Landmark AR (Colour as per design), complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1004.62
-
-
Providing and applying Saint-Gobain Certain Teed Swift Starter – Landmark AR (Colour as per design), complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
964.62
-
-
Providing and applying Saint-Gobain Certain Teed Swift Starter – Landmark AR (Colour as per design), complete and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2527.31
-
-
Providing and fixing 0.60 mm thick pre-painted steel sheet (Tata Durashine Make/century) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with self driven steel screws / pre-painted iron J or L hooks or seam bolts with pre-painted limpet and rubber washers complete with all accessories as required and as per the detailed drawings including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
3271.31
-
-
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick preprinted steel sheets in roofing (Tata Durashine Make/century) with hot dipped metallic zinc / zinc aluminium alloy coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks / self-driven screws, bolts & nuts 6mm dia & preprinted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
323.3
-
-
Providing and fixing valley 90 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
66.46
-
-
Providing and fixing 45 cm wide, 45 cm high prepainted 0.60mm thick sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
129.25
-
-
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Per Kilogramme/sq. Cm including filling the joints with approved adhesive complete.
-
-
-
100mm dia
184.23
-
-
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material up to all lead & lift and as per direction of Engineer In charge.
-
-
-
PVC. collar 100mm
45
-
-
PVC shoe 100mm
45
-
-
PVC Bend100mm
45
-
-
PVC door Bend100mm
50
-
-
PVC Tee 100mm
15
-
-
clamp
147
-
-
Providing and fixing M.S BP Sheet 2mm thick (Tata durashine Make/century) in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
320.38
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogramme/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical paraMetres of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 3 mm thick
2345.26
-
-
20mm cement plaster in single coat on fair /rough side of brick/concrete/stone walls for External plastering upto floor two level and above including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
13444.87
-
-
12mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mmin girth and finished even and smooth. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
5265.33
-
-
6mm thick Cement plaster to ceiling including sides and bottom of beams, soffits of stairs, ramps etc. with cement mortar 1:3 (1cement : 3 fine Sand) including curing and carriage, leads of all kinds of materials and scaffoldings etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
8128.99
-
-
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: In two coats
1164.29
-
-
15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3 ( 1 cement :3 sand) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
5260.78
-
-
Providing and plastering 15mm cement plaster in cement mortar 1:5 (1 cement :5 sand) in two coats backing coat 10mm and finishing coat 5mm thick on rough side of brick masonry/stone masonry/concrete walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
52.3
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
11410.23
-
-
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade and carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
7754
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Per Square Metre over and including priming coat of exterior primer applied @ 2.20 Per Kilogramme/10 Per Square Metre) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
11626.83
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 Per Square Metre over an under coat of primer applied @0.75 ltr/10 Per Square Metre of approved brand and manufacture including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1139.86
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 Per Square Metre over an under coat of primer applied @ 0.80 ltr/ 10 Per Square Metre of approved brand and manufacture including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
8431.48
-
-
Applying priming Coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning of grease, dirt and other foreign matter,including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Ready-mix paint brushing with white lead for priming make(Asian or Nerolac)
145.95
-
-
Painting two coat excluding priming coat with enamel paint to give an even shade on new wood and wood based surfaces/materials including cleaning the surface of dirt , dust and other foreign matter, sand papering and stopping including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.. Readymixed paint other then white make(Asian or Nerolac)
145.95
-
-
Providing & finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etc. complete and carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge make(Asian or Nerolac)
69.5
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge make(Asian or Nerolac)
9889.7
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade & colour and carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge make(Asian or Nerolac) Two coats
8864.42
-
-
Polishing two coats with French polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler and carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
54.36
-
-
DISMENTALING WORK
Demolishing cement concrete manually/ by mechanical means including disposal of material by mechanically & manual upto all lead and lift as per direction of Engineer incharge
22.5
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material by mechanically & manual upto all lead and lift as per direction of Engineer incharge
8.48
-
-
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer incharge
46.2
-
-
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material by mechanically & manual upto all lead and lift as per direction of Engineer incharge
20.29
-
-
Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer incharge
33.6
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking upto 10 metre span.
9488.7
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material by mechanically & manual upto all lead and lift as per direction of Engineer incharge
-
-
-
For thickness of tiles above 25 mm and up to 40 mm
105
-
-
Dismantling G.I. Sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials by mechanically & manual upto all lead and lift as per direction of Engineer incharge
167.5
-
-
Dismantling Cement asbestos celotax/hard board in ceiling or partition Walls including stacking of serviceable materials and disposal of un-serviceable materials by mechanically & manual upto all lead and lift as per direction of Engineer incharge
70.51
-
-
Dismantling Slate roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials by mechanically & manual upto all lead and lift as per direction of Engineer incharge
282.05
-
-
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer incharge
-
-
-
Water bound macadam
46.85
-
-
Bituminous portion
17.57
-
-
ROAD AND PAVERS WORK
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
43204.16
-
-
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick
aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro
reflective sheeting conforming to type - III of ASTM-D4956-01 as approved by Engineer-in-charge, letters,
borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade,
pasted on substrate by pressure sensitive adhesive by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys,
rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along
with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey
colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of
rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same
in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural
frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be
measured for payment). Overhead informatory road signage including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
46
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc and i/c carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb tone shall be approved by Engineer-in-charge). make NTC
919.32
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper mbedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.and i/c carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. make NTC
27710.6
-
-
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
3817.05
-
-
Providing and fixing 30x30x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1424.79
-
-
Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diaMetre 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval
and shall have minimum 10 numbers of openings Per running Metre of mesh perpendicular to twist, tying with lacing wire of diaMetre 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2687.2
-
-
WATER PROOFING WORK
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 Per Kilogramme/Per Square Metre mixed with water proofing cement compound @ 0.253 Per Kilogramme/ Per Square Metre. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Per Kilogramme/Per Square Metre mixed with water proofing cement compound @ 0.126 Per Kilogramme/Per Square Metre. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
147.64
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
104.2
-
-
Horticulture
Grassing with 'Doob' grass including watering and maintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed ( the good earth shall be paid for separately) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
In rows 5.0 cm. Apart in either direction.
11314.5
-
-
Supplying and stacking of good earth at site and Spreading good earth in required thickness including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
3413.25
-
-
Supplying and stacking at site dump manure from approved sources and also Spreading sludge dump manure in required thickness (duly screened through specified sieve) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1697.18
-
-
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 Per cubic Metre per 100 metres and supplying and planting hedge plants at 30 cm apart. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
718.7
-
-
Supply & Plantation of selected specimen plants including mortitity replacement, loading- unloading, transportation and maintenance for 30 days after planting the plants including including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
Caryota Palm 10'-12'
100
-
-
Cycus revolata 3'-4" Dia
90
-
-
Jasmine creeper 300mm
115
-
-
Bauganvillea Creeper 300mm
115
-
-
Supplying and stacking sludge at site including royalty and carriage upto 100 metres by head load and 1 km. By mechanical transport (Sludge measured in stacks will be reduced by 8% for payment) as per direction of Engineer incharge
36
-
-
Mixing earth and sludge or manure in proportion specified or directed including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
36
-
-
Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properlyas per direction of Engineer incharge
120
-
-
Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of Engineer incharge
30
-
-
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material’s as per direction of Engineer incharge.
-
-
-
i) plantation per Tree
30
-
-
ii) plantation per Shrub
30
-
-
iii) plantation per Hedge/Ground cover
30
-
-
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and Displaying Cycus revoluta specimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm cirPer cubic Metrefrance of base stem well developed in 40 cm challi, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and Displaying Euphorbia milli hybrid variety with multi branch, full bloom, with fresh and healthy well developed having 30 to 45 cm ht. in 35 cm Cement Pots including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and Displaying Ficus black vivion piller Topairy (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
30
-
-
Providing and fixing of Tuflex Garden fencing Hexagonal net/or equivalent of green colour having contents (A) Length per Roll 20 M. (B) Width 1.20 M. © Form-sheet (D) Apeture Shape hexagonal (E) Weight grams/Per Square Metre. 510 (+/- 8%) (F) (20 gram) aperture Size 28 × 28 (+/- 3mm) in width of 60 cm. with bamboo of 90 cm. length and 18-20 girth. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. The net and bamboo should be binded with 2 mm. G.I. Wire at three places properly including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
150
-
-
Providing and fixing cast iron / M.S garden benches as per drawings and design including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge having Size: 60”(L) x 27”(W) x 32”(H)made cast iron bracket side and M.S rectanguler pipe 50mmx25mmx3mm i/c priming and painting with wooden colour
79
-
-
Providing and fixing 3 seater composite bench with back rest, made up of steel and wood having size of (1200 x 500)mm, as per approved design and techincal specifications including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing and fixing 3 seater composite bench without back rest, made up of steel and wood having size of (1200 x 450)mm, as per approved design and techincal specifications including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.
15
-
-
Provding and fixing dustbin as per drawings and design including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Dustbin-square twin
55
-
-
Providing and fixing 11 litr. Capacity of (10 X 14)inch, Stainless steel perforated swing Dustbins with cover removable lid round shape silver color slim and fingerprint-proof finish as/techincal specifications including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing and fixing size of (14X 24)inch, Stainless steel swing Dustbins with cover removable lid round shape silver color slim and fingerprint-proof finish as/techincal specifications including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing and fixing STEEL TRIO AUTO BIN, CAPACITY- 70L, TRIPLE COMPARTMENT HS Code 73239390 Model No. SWB70L-3C having dimension 541mmx330mmx671mm including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Providing and fixing SWB70L-3C Touchless Trash Bins TRIO AUTO BINS Stainless Steel 304 Dustbin as drawing/ design / specification including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing .in RCC work smooth finishing of the exposed surface with cement mortor1:3(1cement :3 sand ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
299.44
-
-
Brick /Stone /Boulder filling under floor dry hand packed including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
936.57
-
-
Providing and laying weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 110 mm dia PVC pipe (pressure should not be less than 4Per Kilogramme/cm2), extending through the full width of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
75
-
-
Providing and fixing seasoned 20mm thick teak wood finish wall panelling in Entrance lobby with 6mm grooves in it as shown in dwg and design teak ply over 19 m.m. waterproof plywood with melamine polish finish including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
136.04
-
-
Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Per Kilogramme/Per cubic Metre, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboo wood planks shall have minimum density of 1000 Per Kilogramme/Per cubic Metre & minimum Hardness 1000 Per Kilogrammef. with Eco friendly UV coating, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Ferro Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, including the cost of centering, shuttering, finishing, wire mesh and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20mm nominal size). including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2.1
-
-
Stucco work in lime, Surkhi, mortar (1:2) as per existing design work/ traditional practices by skilled craftsman, the stucco work should be done as per restoration nature, the mortar should be prepared by grinding mill adding gur, methi & gugal.. The thickness varies from 50 mm to 100mm as per the design (minimum rectangular surface area to be measured). including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2104.35
-
-
OUTDOOR TOWER CLOCK- 6 Feet's ( 1800 mm)
Providing and installation of GPS Clock Mechanism • Clock Movement- Electro Mechanical movement made with waterproof high precision hard and rust free stainless steel and brass wheel, center shaft, warm wheel center wheel, canon pinion, Hour Wheel, Minute Wheel, Arm Bushes and bearing driven.• Clock Driver Clock Hands- Aluminium CLock Hands Black Colour • GPS CLOCK CONTROLLER- With Battery back-up for 48-72 Hours including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
8
-
-
Providing and Fixing of Ready made Pre fabricated Security Cabin ( 4'-0"x4'-0"x7'-0") including finishing work i.e granite stone flooring , painting ,Door,window and all Electrical work complete i/c carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Providing and installation of Merry go round :-
Providing and fixing of Merry go round its required area 3.0 mtr. X 3.0 mtr. Total height 0.9 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments. And install by C.C. base system as per order by engineer in charge age capacity 14 years and seating capacity 6 childs including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Providing and installation of Dome Climber :-
Providing and fixing of Dome Climber its required area 3.6 mtr. X 3.6 mtr. Total height 1.8 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments and seating capacity 6 childs including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Providing and installation of Triple Wave Slide :-
Providing and fixing of Triple Wave Slide with Platform Canopy its required area 6.0 mtr. X 3.0 mtr. Total height 2.5 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments and Child age up to 14 years.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Supply and erection of M.S. Galvanized Octagonal pole ( as per Drawing /design for MS plate for base flange )of following length and dimension as per drawing with base plate on the cement concrete foundation with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. complete in all respect. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. 6 mtr with single / Double arm overhang
555
-
-
Providing and installation of water pond fountain with pumping arrangement and electrical lighting system as per approved design and drawing.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
1
-
-
Providing and installation of water Body with pumping arrangement and electrical lighting system as per approved design and drawing.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
5
-
-
Providing and installation of Ornamental Gazebo with roof covering of slate and wooden ceiling finished with spirit polish on wood and steel column are covered with wooden planks, including ornamental brackets as per approved design and drawing.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
2
-
-
Steel truss Bridge Construction of 45.00 mtr Span ( Single lane) 4.25mtr wide Steel truss bridge including both side approaches , site exploration , soil investigation , structural design for Sub structure and Super structure to be got vetted from the IIT/ NIT Experts complete in all respect to the entire satisfaction of Engineer -in- Charge , and as per IRC Specifications. Suspension bridge ( 45.00 mtr Span) up to 6.00 mtr height of abutment from the founding level .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
45
-
-
Toy Train
Supplying, installing,testing and commissioning of Battery operated mini train, (Parkash Amusement Rides & Infrastructure Pvt.Ltd.) having tracke length 1km for coach 4 nos each capacity 20 nos total capacity 80 pessenger as per drawing / design / specification as per direction of Engineer i/c carriage of material by mechanically & manual upto all lead & lift following spcefications are as under: Locomotive Shape : Antique/ Vintage style Train Components : 1 Locomotive, 1 coal tender, 4 passengers bogies(carriage) Engine : 1 Nos. Coach : 4 Nos. Seating cap. Per coach : 20 Total Capacity : 80 Passenger Track Length : 1000 mtrs Engine Power : 30 kw, D.C power Drive form : Electric motor drive Mode of Power : Battery 120 volts DC 900Ahm Max Speed : 7.5 Km/Hr. on leveled track Turning radius (mtrs.) : More than 25mtrs. radius Line limit slope (full load) : 1% Gradient Carriage Floor : Wood or Aluminum Chequred plate Carriage Seat : Wood Seats/ Wooden finished FRP Single Molded Benches Braking System : Hydraulic Disc brake Maximum braking distance : 10 mtrs. (full Load) Traction control method : Locomotive Traction
Features Included Cabin : Wood + Fiberglass + Sheet metal processFront Shield : Glass Paints : Auto high-end paint Display Metre on front Panel : Speed, Current AmpMetre, Volt Metre, SpeedoMetre Switch identification : Our own design Public Announcement system : Ahura company make system, with USP port and Mic system Driver Cabin : Standard as per our own design (option- can be customized) Smoke : Smoke machine available optional Horn : Air horn/ Whistle Lights : Head lights & LED Lights in boogies hood
1
-
-
Water supply and Installation work
Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (heavy grade) tube fitting and clamps including making good the wall, ceiling and floor:- .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
15mm nominal bore
70
-
-
20mm nominal bore
40
-
-
Providing and fixing 25mm nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
4
-
-
Providing , laying,jointing & testing of screwed and socketted Galvanised Mild steel tube of approved make or of approved rate contract of DGS & D/HP Government conforming to BIS 1239-1990 ( Part-II )of following diaMetre including all tube fitting are required as per actual site with in all leads and lifts i/c cost of G.I fitting & Valve .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge ( Cost of earth work to be measured and paid separately )
-
-
-
32 mm dia
230
-
-
40 mm dia
660
-
-
50 mm dia
1370
-
-
Providing,laying, jointing & testing of bevelled ended GI pipe Medium Class with MS Flange of Table 17 (6%) & other Pipe (94%) cirPer cubic Metrefrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) and
testing of GI pipe of Jindal /Surya Roshni / Tata/AST make of following dia Metres conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable
of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, bends etc. as per site requirement made from parent tubes . The laying of pipe shall also include welding of flanged joints wherever required duly welded in three layers (two inner & one outer) and all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt
welding , lowering & laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-charge (Earth work in trenches and
the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) . The fabricated bends shall have three or four cuts having its radius not less
than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203- 1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes, D.P. test of butt welded joints complete in all respect and to the best satisfaction.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
65 mm dia
480
-
-
80 mm dia
1670
-
-
100 mm dia
1865
-
-
125 mm dia
325
-
-
Providing,laying, jointing & testing of bevelled ended MSERW pipe (Zinc Coated) 4.80mm thick with MS Flange Table 17 (33%) and other pipe (67%) with cirPer cubic Metrefrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of Jindal /Surya Roshni / Tata/AST make of following dia Metres conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, bends etc. as per site requirement made from parent tubes . The laying of pipe shall also include welding of flanged joints wherever required duly welded in three layers (two inner & one outer) and all operations such as cutting, welding, jointing, fabrication of bends, tees, making bevelled pipe ends suitable for butt welding , lowering & laying in excavated trenches to ensure required level complete in all respects to the best satisfaction of the Engineer-in-charge (Earth work in trenches and the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) . The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the parent tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications
C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes, D.P. test of butt welded joints complete in all respect and to the best satisfaction.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. 250 mm dia
910
-
-
Providing MS flanges (In pairs) for the joints of GI/MSERW pipes mentioned as below and same shall conform to BIS 6392-1971 ( latest with up to date amendments) including the cost of nuts and bolts of required sizes, 3mm thick compressed asbestos
fiber/synthetic rubber gaskets conforming to relevant BIS standards and it shall also include carriage of materials within all leads and lifts complete in all respect to the best
satisfaction including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
65 mm dia
5
-
-
80 mm dia
17
-
-
100 mm dia
19
-
-
125 mm dia
3
-
-
250 mm dia
9
-
-
Providing and fixing GI union of following dia complete in all respect and to the best satisfaction .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
32 mm dia
7
-
-
40 mm dia
21
-
-
50 mm dia
43
-
-
Providing and fixing GI Tee of following dia complete in all respect and to the best satisfaction.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
32 mm dia
2
-
-
40 mm dia
6
-
-
50 mm dia
11
-
-
Providing and fixing GM Peet Valve (with hand wheel) of following dia complete in all respect and to the best satisfaction.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
32 mm dia
2
-
-
40 mm dia
7
-
-
50 mm dia
14
-
-
Providing & Fixing of Kirloskar/ Kilburn/IVC/Fouress /Gled/BHEL/Leader make C.I double flanged sluice valve class PN-1.6 confirming to BIS 14842-2000of following dia capable with standing nominal seat pressure of 16 Per Kilogramme/cm² complete in all respect .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
65 mm dia
3
-
-
80 mm dia
4
-
-
100 mm dia
4
-
-
125 mm dia
1
-
-
Providing & Fixing of Kirloskar/Kilburn /IVC/Fouress/Gled/BHEL/ Leader make Cast steel double flanged sluice valve of class ASA-600 confirming to BIS-1414 (API-600) of following dia capable with standing nominal seat test pressure of 52 Per Kilogramme/cm² complete in all respect .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 250 mm dia
1
-
-
Providing & Fixing of Kirloskar/Kilburn Fouress/Gled/BHEL/ Leader make Cast steel double flanged swing check type reflux valve having bypass arrangement of class
ASA-600 confirming to BIS-1868 (API-6D) of following dia capable with standing nominal seat test pressure of 52 Per Kilogramme/cm² complete in all respect.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 250 mm dia
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
15mm dia
200
-
-
20 mm dia
24
-
-
25mm dia
188
-
-
32mm dia
113
-
-
40mm dia
22
-
-
Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
34
-
-
Providing and fixing 6 Per Kilogrammef pvc Poly plast sewerage pipe of working pressure not less than 4.5 Per Kilogramme per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
150 mm dia
100
-
-
100mm
1013
-
-
75mm
229
-
-
Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
PVC plain bend 150mm
25
-
-
PVC plain bend 100mm
37
-
-
PVC plain bend 75mm
14
-
-
PVC door bend 150mm
25
-
-
PVC door bend 100mm
36
-
-
PVC door bend 75mm
12
-
-
PVC collers 150mm
25
-
-
PVC collers 100mm
36
-
-
PVC collers 75mm
12
-
-
PVC cowl 100 mm dia
15
-
-
PVC cowl 75 mm dia
6
-
-
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
100mm
74
-
-
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :-.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
2000 lts capacity
9
-
-
Providing and fixing wall hung vitreous wash down white colour Jaguar MAKE cat no ARS-WHT-39953BIUFSM make or equivalent white colour along with SEAT COVER CISTERN Cat No. JCS- WHT - 2400FS and flushing control plate Cat No. JCP-CHR-852415 fittings etc. complete in all respect, ( European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
16
-
-
Providing and fixing floor mounted vitreous wash down white colour Jaguar MAKE cat no SLS -WHT 6851S300UF make or equivalent white colour along with SEAT COVER fittings etc. complete in all respect, ( European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
21
-
-
Providing and fixing vitreous china pedestal type/wash down floor mounted water closet (WC) with size (475x370x420)mm white colour studio set along with 8mm dia C.P/ S.S JET,SEAT COVER, Flushing CISTERN (10ltr. cap.) and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
8
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required for White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
8
-
-
Providing and fixing Urinal with senser size(mm) 330x275x550mm Jaquar/Hindware/cera /Somany make or equivalent catalog No. URS-WHT-132530 and sencer catlog no SNR-STL-51083 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
38
-
-
Providing and fixing white viterous Glass division plate of Jaquar cat no JSE-CHR-810UC450X for urinal of size 900 mm X 450mm complete and sensor cat no STL-51083 (Jaquar or equivalent) and as per specification , drawing.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
35
-
-
Providing and fixing Jaguar wash basin Jaguar MAKE cat no JDS-WST-25907N with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 480x420x150mm.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
44
-
-
Providing and fixing Jaguar wash basin Jaguar MAKE cat no CNS-WHT-905 with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 480x420x150mm.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
24
-
-
Providing and fixing towel rack 600 mm with lower hanger A C N -1181 S paper holder Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
12
-
-
Providing and fixing Angular stop cock with wall flange Jaquar Make Cat No. ALI-85083 K AND Concealed Body of Flush Cock Suitable for 20 mm Pipe Line with Protection Cap Jaquar Make Cat No. ALD-083.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
63
-
-
Providing and fixing health faucet with 8mm dia,1.20m long flexible tube and wall hook Jaquar Make Cat No. ALID-573 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
60
-
-
Providing and fixing 15mm nominal size CP brass angle Cock Jaquar Make Cat No.ALI -85053 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
134
-
-
Providing and fixing 15 mm nominal size single lever wall Basin Mixer Jaquar Make ALI-85233 NK and concelled body foe single lever basin mixer ALD - 233 N or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
28
-
-
Providing and fixing soap tray Jaquar Make A C N -1177N or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
43
-
-
Providing and fixing toilet paper holder Jaquar Make A C N -1153S or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
54
-
-
Providing and fixing square towel ring A C N -1121 N Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
26
-
-
Providing and fixing Soap dispenser with metallic bottele AC N -1137 N Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
19
-
-
Providing and fixing Grab bar 300 mm AC N -1101 S Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
3
-
-
Providing and fixing Rob hook AK P -35761P Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
55
-
-
Providing and fixing hand dryer HDRSSF-AK2807 Jaquar Make or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
16
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: fittings and brackets, cutting and making good the walls wherever required :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
12
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever size 600x450x200 mm..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
20
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
54
-
-
Providing and fixing Waste coupling 32 mm with 130 mm thard Jaquar Make Cat. No ALD-705L130.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
24
-
-
Providing and fixing bottel trap with fully casted body (with integral partition ) 32mm with 250 and190 mm long connecting pipes Jaquar Make Cat. No ALD-769L250X190..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
50
-
-
Providing and fixing Bib cock (strainght line model) with wall flenge Jaguar make Cat No. FLR-5047N or equivalent with all accessaries including cutting and making good the walls wherever required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
16
-
-
Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
16
-
-
Providing and fixing 100mm dia C.P. Grating .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
117
-
-
Providing and fixing PVC connections pipe with brass unions 45cm length 15 mm nominal bore .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
164
-
-
Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
8
-
-
Providing and fixing brass full way valve with wheel .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
15mm dia bore
5
-
-
20 mm dia bore
5
-
-
Providing and fixing ACN-1111SM Single Towel Rail 600mm Long, Stainless Steel Jaquar make or equivalent including all cost, conveyance and labour charges etc complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing & fixing C.P. Towel ring Jaguar make Cat No. AKP-35721P or equivalent .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
15
-
-
Providing & laying in trenches GMS/MS Tubes (L/M class) tube fitting (Earth work in trenches to be measured & paid for separately)
-
-
-
80mm
42
-
-
Providing & fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia. 300 mm) complete with bolts nuts,rubber insertion etc.,(the tail piece if required shall be measured & paid for separatly).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
-
-
-
80mm
8
-
-
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W.drain pipe 100 mm diaMetre and 1.20m long complete as per standard design.as per direction of Engineer incharge
13
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and depth as per site requirment including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to be
not less than 38 Per Kilogramme (weight of cover 23 Per Kilogramme and weight of frame 15 Per Kilogramme) :
56
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 Per Kilogramme and frame to be not less than 2.70 Per Kilogramme as per standard design: 100x100 mm size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
10
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.For pipes 100 to 250 mm diaMetre
1
-
-
Constructing chamber for sluice valve, with CI surface box 100 mm top dia.,160 mm bottom dia. & 180 mm deep(inside) with chained lid RCC top 1:2:4 mix (1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortor 1 :3 (1 cement : 3 sand) finished with a floating coat of neat cement i/c curing complete. 600 x 600 x 750 mm inside size With 150 mm thick walls of RCC 1:2 :4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways
4
-
-
Prov. & fixing SFRC Man hole cover with frame having frames size of 560 mm internal dia.should not be less than 100 Per Kilogramme.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
4
-
-
Supplying and fixing cast iron cover with frame (total weight 38Per Kilogramme) for man holes for frame of internal dimension 610x610mm rectanguler CI cover (light duty single seat pattern -I) the weight of cover to be not less than 23 Per Kilogramme and of frame not less than 15 Per Kilogramme, .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge
5
-
-
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.
309.74
-
-
FIRE FIGHTING WORKS
Supply, installation, testing & commissioning of Electric driven Hydrant Pump and Sprinkler Pump suitable for automatic operation consisting of the following:
Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump.
Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.
Common bed plate of fabricated mild steel channel or cast iron type.
Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:
Discharge - 2280 lpm
Head - 65 m
No. of stage preferred - Single / Double
Speed RPM - 2900
Material of construction a) Impeller - Bronze
b) Casing - C.I.
c) Shaft & Shaft Sleeve - SS-410
d) Bearing - Grease Lubicated
Type of pump - End suction
2
-
-
Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic operation consisting of the following: Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary arrangement for testing of pump.
Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.
Common bed plate of fabricated mild steel channel or cast iron type.
Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:
Discharge - 180 lpm
Head - 65 m
No. of stage preferred - Multistage
Speed RPM - 2900
Mover - Electric Motor Driven
Material of construction a) Impeller - Bronze
b) Casing - C.I.
c) Shaft & Shaft Sleeve - SS-410
d) Bearing - Grease Lubicated
Type of pump - End suction
4
-
-
Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic operation consisting of the following:
Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump.
Water coolled Diesel Engine developing suitable BHP at 2100 RPM for the Pump, common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 200 lts with first charge and manual oil pump set.
Flexible coupling and coupling guard with the Pump,
Common bed plate of fabricated mild steel channel or cast iron type.
Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine panel Sealed maintenance free batteries of 24 V, 88 AH
Exhaust pipe of required length with asbestos lagging, muffler
Day oil tank of 400 lts with first charge and manual oil pump set.
The pump shall be of the following specifications:
Discharge - 2280 lpm
Head - 65 Mtr
No. of stage preferred - Single / Double
Speed RPM - 2150 RPM
Mover - Diesel engine driven
Material of construction a) Impeller - Bronze
b) Casing - C.I.
c) Shaft & Shaft Sleeve - SS-410
d) Bearing - Grease Lubicated
e) Type of pump - End Suction
4
-
-
Supplying & fixing of Air vessel of 450 mm dia x 2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top and drain valve of 25 mm dia on bottom for manually release.
-
-
-
450MM x 2 MTR LONG
1
-
-
ELECTRICAL PANEL
Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. The panel will have separate compartments for bus bar and cable alleys.The following components and accessories will be mounted within each control panel.
-
-
-
One No. Incoming incoming MCCB complete with the following:
i. VoltMetre with selector switch and fuses.
ii. AmMetre with 630/5 amps CT's and selector switch.
iii. Over voltage and under voltage tripping mechanism for persistent voltage fluctuations of ± 10% of the rated voltage for more than 5 minutes.
iv CT operated over current and earth fault realy (IDMT) with indicating lamps.
v. Phase indicating lamps with toggle switches.
vi. Indication lamps for ON/OFF/TRIP starters of motor.
-
-
-
Aluminium bus bar sleeves type, rated at for three phase & neurtal phase bus bar shall have maximum current density of 1 amps per sq.cm. and the neutral bus bar of not less than 50% capacity.
Outgoing feeders with Star delta starters with Single Phase Preventor and out going feeders to wet riser hydrant pump motor and Sprinkler pumpset (2No.-60 HP each-appx.). The compartment will contain CT operated amMetre with selector switch and an indicating lamp with fuse and toggle switch for`ON'/`TRIP'status of motor.
Star delta starter with single phase preventer and outgoing feeder to jockey pump motor (2No.-10 HP each-appx). The compartment will contain CT operated amMetre and an indicating lamp with fuse and toggle switch for `ON'/`TRIP' status of pump motors.
Star delta starter with single phase preventer and outgoing feeder to hydrant & sprinkler pump motor(2No.-75 HP -appx). The compartment will contain CT operated amMetre and an indicating lamp with fuse and toggle switch for `ON'/`TRIP' status of pump Star delta starter with single phase preventer and outgoing feeder to water curtain pump motor(1No.-40 HP -appx). The compartment will contain CT operated amMetre and an indicating lamp with fuse and toggle switch for `ON'/`TRIP' status of pump All Necessary equipments for Diesel Engine Pump controller with Battery Charger Rectifier complete in all respects
Necessary cable alleys space for switches, internal wiring and copper earthing of all equipment willll also be included. All switch gears/control gears will be motor duty rating.
2
-
-
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or on cable tray as required at site.
-
-
-
120Per Square MetreM X 4 CORE FOR INCOMING
260
-
-
50Per Square MetreM X 4 CORE
160
-
-
35Per Square MetreM X 4 CORE
160
-
-
16Per Square MetreM X 4 CORE
130
-
-
1.5Per Square MetreM X 2 CORE FLEXIBLE CABLE FOR PRESSURE SWITCHES
160
-
-
4 Per Square MetreMX 3 CORE COPPER FOR JOCKEY PUMPSET
170
-
-
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15Per Kilogramme/cm2 & including connection with main panel etc. as required complete in all respects for Hydrant, Sprinkler, Standby and Jockey pump including necessary wiring upto control panel & other materials.
10
-
-
Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)
-
-
-
200 mm dia
32
-
-
150 mm dia
52
-
-
100 mm dia
44
-
-
80 mm dia
8
-
-
50 mm dia
8
-
-
Providing and fixing of MS Angle on wall with suitable fastner of 12mm thick x 100mm long as required for pipe support.
190
-
-
Supply and erection of MS perforated cable tray with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc. complete in all respect.
-
-
-
MS perforated cable tray size 200mm x 50mm x 50mm (2mm thick)
44
-
-
MS perforated cable tray size 80mm x 50mm x 50mm (2mm thick)
70
-
-
Providing and fixing Pressure Gauge complete as required complete in all respect.
-
-
-
Dial diaMetre 100mm calibration 0-16 Per Kilogramme
8
-
-
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete in all respect.
-
-
-
200 mm dia
4
-
-
150 mm dia
12
-
-
100 mm dia
12
-
-
80 mm dia
4
-
-
50 mm dia
2
-
-
Proving & fixing ISI Marked Dual Type Non-return valves flanged end class PN-1.6 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc complete
-
-
-
150mm dia(Dual Type NRV)
3
-
-
100 mm dia(Dual Type NRV)
4
-
-
Supplying, Installation, Testing and Commissioning of cast iron flanged Y type strainer with stainless steel mesh in PN-1.6 including cost of Nut Bolt , rubber insertion complete in all respects.
-
-
-
150 mm dia
6
-
-
100 mm dia
4
-
-
Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)
-
-
-
150MM
135
-
-
100MM
96
-
-
80MM
147
-
-
Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe (For External) conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. (Bricks Pedestals and Exacuavation for external pipe in Contractor scope)
-
-
-
150 mm dia
515
-
-
80 mm dia
23
-
-
Supplying, Installation, Testing and Commissioning of Stainless Steel following headed hydrant valve with instantaneous SS coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 with blank Cap and chain complete in all respects.
-
-
-
Single Hydrant Valve
24
-
-
Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with Stainless Steel male & female couplings (ISI marked) bound & riveted to hose pipes with GI rivets and GI wire as required.
18
-
-
Supplying, Installation, Testing and Commissioning 63 mm dia Stainless Steel Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Stainless Steel nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
12
-
-
Providing and fixing first aid hose reel full swinging type including cabinet with 30 m length x 20 mm dia rubber lined pipe with ABS plastic shut off nozzle of 6 mm dia. The hose reel will conform to IS requirements. Rate will 25 mm dia pipe connection from riser to hose reel including flexible pipe, sockets, nipples, elbows .
18
-
-
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc.
-
-
-
900 mm x 600 mm x 500mm (For Yard Hydrants)
10
-
-
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
28
-
-
Providing and fixing M.S. fire hose shaft door with frame fabricated from angle iron frame 40 x 40 x 6 mm thick, angle iron shutter 25 x 25 x 4 mm thick, 16 g M.S. sheet of fully welded construction with hinged double front door with locking arrangement and butt hinges, 15 x 3 mm lugs 10 cm long (6 Nos) embedded in cement conc. blocks ( 1: 3: 6 mix) or with rawl plug and screws/bolts and nuts as required, partly glass door 4 mm thick approved by local fire aurthority, painted with one coat of primer, stove enamelled fire red finished, "Fire Hose" written on front, suitable to accommodate 2 Nos single headed Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, 1 fire-man's axe, including suitably mounted on a raised masonry platform as required. (Approx.size 0.9m x 2.1m)
18
-
-
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Stainless Steel seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.
-
-
-
150MM
7
-
-
80MM
10
-
-
Providing and fixing fire brigade inlet connection of cast iron body with Stainless Steel 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904.
-
-
-
Four Way inlet connection
2
-
-
Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top .
2
-
-
Providing and fixing of drawl out connection for drawl of water
2
-
-
Providing and fixing Pressure Gauge complete as required complete in all respect. Dial dia 100 mm calibration 0-16Per Kilogramme/cm2
8
-
-
Providing, laying, fixing, testing and commissioning of 'C' Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)
-
-
-
150MM
167
-
-
100MM
163
-
-
80MM
219
-
-
65MM
134
-
-
50MM
163
-
-
40MM
358
-
-
32MM
722
-
-
25MM
2335
-
-
Providing & Fixing of installation control valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve as per manufacturer's specifications complete.
-
-
-
150mm dia
8
-
-
Providing and fixing Pressure Gauge complete as required complete in all respect. Dial dia 100 mm calibration 0-16Per Kilogramme/cm2
18
-
-
Providing,fixing and Testing of UL Listed quartzoid bulb type Sprinklers head to operate at 68 degree Centigrade.
-
-
-
Pendent Type Sprinklers
1496
-
-
Providing,fixing and Testing of UL Listed Stainless Steel flexibles for ceiling area for sprinklers
-
-
-
1500 mm Long
120
-
-
1200 mm Long
120
-
-
1000mm Long
172
-
-
Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr long with dome ends on both side complete with pressure gauge, air release valves on top .
2
-
-
Electrically Operated Flow Indicating Switches ( vane type) including tamper switch and accessories, with potential free contact with 2 Nos. NONC. Complete.
-
-
-
For 150 mm dia
-
-
-
For 100 mm dia
18
-
-
For 80 mm dia
-
-
-
16 (12 working + 4 spare for future) zones annunciater Panel for flow control switches, providing Audio/Visual Indication of actuation of Automatic Sprinkler system / fault hooter etc., for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system.
2
-
-
Providing and fixing 25 mm dia inspecting & testing assembly with gunmetal sight glass & connected to drain line.
18
-
-
Providing and Fixing with Brackets/ Supports etc. Wall/ Floor Mounted Fire Extinguisher as per detail given below:
-
-
-
Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
6Per Kilogramme Capacity
15
-
-
Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
4.5Per Kilogramme Capacity
15
-
-
CO2 Type Fire Extinguisher 22.5 Per Kilogramme Capacity ISI Mark IS 16018 fitted with 5 Mtr. Hose
Horn & Trolley Handle Complete in all respect.
2
-
-
Providing & fixing of set of GI fire buckets set of four nos. each of 9 lt capacity including providing MS angle stand with hooks for holding buckets, painting with red paint & sign written "FIRE" on each bucket & filling of sand in two buckets of each set.
8
-
-
Electrical Installation Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. (Polycab,havells make or as approved by site engineer)
-
-
-
a) Group A.
169
-
-
b) Group C.
635
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF) single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
442
-
-
Supplying and fixing two module stepped type fan regulator on the existing modular plate switch box including connections etc. as required. (Legrand, Havells, make or as approved by site engineer
159
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer)
-
-
-
Single pole 5/ 6 Amps one way Modular switch.
35
-
-
5 pin, 5/ 6 Amps Modular socket outlet.
35
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer
141
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer
138
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
30
-
-
Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Polycab,havells make or as approved by site engineer)
-
-
-
1 x 1.5 sq. mm
1954
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells make or as approved by site engineer)
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1893
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2610
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1558
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
72
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
673
-
-
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.(polycab, Diplast make or as approved by site engineer)
-
-
-
20 mm dia. ISI marked, PVC conduit
2129
-
-
25 mm dia. ISI marked, PVC conduit
2945
-
-
32 mm dia. ISI marked, PVC conduit
682
-
-
Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand,havells make or as approved by site engineer)
-
-
-
Single pole MCB 6 / 32 A
420
-
-
MCB Double pole 32Amp
34
-
-
MCB Triple pole and neutral 63 Amp
36
-
-
Supplying and fixing following way, horizontal type single pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer)
-
-
-
Double door-4way
6
-
-
Double door-8 way
22
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer)
-
-
-
Double door-4 way (8+12),horizontal type
24
-
-
VTP&N-8 way (8+24),horizontal type
3
-
-
Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha,Bajaj,Havells make or as approved by site engineer)
-
-
-
Ceiling Fan 1200 mm sweep, category-A
54
-
-
Ceiling Fan 1400 mm sweep, category-A
113
-
-
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by site engineer)
-
-
-
Exhaust Fan, Light duty, 300 mm sweep
35
-
-
Exhaust Fan, Heavy duty, 380 mm sweep
4
-
-
Providing and installation of stationary storage type Electric water heater Andris Slim 30 ltrs Geyser Racold Make (Geyser) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.(Racold,crompton,Havells make or as approved by site engineer)
-
-
-
30 Liter capacity water heater (Cat-A)
2
-
-
Providing and installation of Hi wall mounting type split Airconditioners of following sizes and making good the damages, connections, testing and commissioning etc (Blue Star,Voltas,LG,Daikin make or as approved by site engineer)
-
-
-
1.5TR Capacity
10
-
-
2.0TR Capacity
2
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer)
-
-
-
Telephone socket outlet, Modular.
12
-
-
TV. Socket outlet, modular.
2
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer)
-
-
-
1 Pair
260
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer)
150
-
-
Providing computer points consisting of G.I modular type box , front and cover plates with snap fit type RJ45 socket complete with making connection using Cat 6 or equivalient type cable as directed by the Engineer -in -charge
30
-
-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required (legrad,Havells make or as approved by site engineer)
3
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
4
-
-
Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
-
-
-
G.I. earth plate 600 mm X 600 mm X 6 mm thick
4
-
-
Copper earth plate 600 mm X 600 mm X 3 mm thick
6
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
6
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
40
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
90
-
-
Providing and fixing G.I. tape 50 mm X 6 mm thick on surface of wall or in pipe complete as required.
180
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
120
-
-
Providing and fixing 6 SWG dia Copper wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required.
80
-
-
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required.
50
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/armourered/XLPE power cable, working voltage 1100 volts grade on surface /existing pipe etc. of the required size:- (Polycab,Havells or ISI make as approved by site incharge)
-
-
-
Armoured cable10sq. mm (2 core)
100
-
-
Armoured cable6sq. mm (2 core)
350
-
-
Armoured cable 10 sq. mm (4core)
450
-
-
Armoured cable 50sq. mm (3.5 core)
200
-
-
Armoured cable 95 sq. mm (3.5 core)
350
-
-
Armoured cable 150 sq. mm (3.5 core)
50
-
-
Armoured cable 240 sq. mm (3.5 core)
50
-
-
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 Metre below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab, Havells or ISI make as approved by site incharge)
-
-
-
i) Armoured cable6sq. mm (2 core)
2470
-
-
ii) Armoured cable 10 sq. mm (4core)
100
-
-
iii) Armoured cable 95 sq. mm (3.5 core)
30
-
-
iv) Armoured cable 150 sq. mm (3.5 core)
10
-
-
v) Armoured cable 240 sq. mm (3.5 core)
10
-
-
Providing and fixingSurface mounted 20 watt Wipro make LED Mirror light fixture cat no. LL20-111-XXX-65 NE3 20W or of equivalent K lite/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer
30
-
-
Providing and fixing Surface mounted 6 watt K Lite make LED Up down light fixture wall cylin mini cat no. 3654 or of equivalent Wipro/Bajaj/Philips make
20
-
-
Providing and fixing of LED batten for surface and pendent anodised extruded aluminium housing,high transmittive diffuser Wipro make Cat No. LL20-111-XXX-65 NE3 20W or of equivalent Bajaj/Philips make complete with all accessories including connections,testing and commissioning as required.
33
-
-
Providing and fixing Surface mounted 7 watt Bulk head LED light fixture 7W Wipro make cat no. LW 07 -141-XXX-57-G1 orBajaj/Philips/K lite make
14
-
-
Providing and fixing of Recess/Surface mounted Luminaire with Al. Di-cast housing and with touhened glass and unique lenssystem for enhanced illumination 80watt Wipro make LED Flood light fixtureIP 66 Protected Xpress Bay Pro cat no. LH 26C-102120--57XX or of equivalent K lite /Bajaj/Philips make including connections, testing and commissioning as required or its equivalent as approved by engineer in charge.
55
-
-
Providing and fixing of Surface mounted 30 watt LED 2x2 panel light fixture of Wipro or equivalent Bajaj/Philips complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
24
-
-
Providing and fixing fSurface/Recess mounted 12 watt K Lite make LED light fixture cat no. 3342 or of equivalent Wipro/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc.and as required and as approved by site engineer .
794
-
-
Providing and fixing of Surface /Recess mounted 7 watt K Lite make LED light fixture cat no. 3285 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
104
-
-
Providing and fixing of Surface mounted 180 watt K Lite make LED Flood light fixture for facade lighting cat no. 4202 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
5
-
-
Providing and fixing of Surface mounted 120 watt K Lite make LED Flood light fixture for facade lighting cat no. 4201 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning as required and as approved by site engineer
5
-
-
Providing and fixing of Surface mounted 50 watt K Lite make LED Flood light fixture for facade lighting cat no. 6805 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning as required and make or as approved by site engineer.
15
-
-
SITC of Surface mounted 30 watt K Lite make LED Flood light fixture for facade lighting cat no. 4286or of equivalent Wipro/Bajaj/Philips, including making connections, testing etc. as required or as approved by site incharge
5
-
-
Supplying,installation,testing and commissioning of Astronomical time switch 2 output per phase and suitable for single, capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) withmanual override facility with 12/24 hour display format with suitable battery andindication for relay status i/c programming at site complete as required (Legrand,Havells make or as approved by site engineer)
2
-
-
Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts.
-
-
-
63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Legrand make Cat No. 027029 ,63 Amp FP, MCCB
2
-
-
100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB
2
-
-
200 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB
2
-
-
Supply and Erection testing and commissioning of K lite make 4.2 m long decorative pole as per catalogue No.K Lite make Cat No.KP 4337,Model and with decorative single arm bracket for supporting Decorative 1 No.30W each LED fixtures o or equivalent along of Bajaj / L.T / Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
59
-
-
Supply and Erection testing and commissioning of K lite make catalogue No.K Lite make Cat No.4337. ,Model decorative 1 No.30W each LED fixtures or equivalent along of Valmont/Bajaj / LT/Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
776
-
-
Supply and erection of DWC HDPE Pipe 1m below ground level including excavation and back filling as may be required at site Dura line/TeleRex/Astral makes or equivalent as approved by engineer incharge.
-
-
-
160/136 mmdia
100
-
-
120/103 mm dia
100
-
-
63/51mm dia
1100
-
-
Supply and erection of MS perforated 200 mm widecable tray with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc. complete in all respect.
180
-
-
Fire Alarm System
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.(siemens make or as approved by site incharge)
-
-
-
Ten Loop Panel.
1
-
-
Single Loop Panel.
1
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise Per cubic Metre fixed tempreature thermistor complete with base as required. (Heat Detector )(siemens make or as approved by site incharge)
267
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise Per cubic Metre fixed tempreature thermistor complete with base as required. (Smoke Detector )(siemens make or as approved by site incharge)
165
-
-
Supplying, installation, testing & commissioning of addressable fire control module complete as required(siemens make or as approved by site incharge)
25
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.(siemens make or as approved by site incharge)
26
-
-
Supplying, installation, testing & commissioning of addressable horn Per cubic Metre strobe complete as required.
26
-
-
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.(siemens make or as approved by site incharge)
22
-
-
Supplying and laying of following sizes of LSZH PVC insulated Ar fire survival copper conductor, 2 core cable as required.(polycab. Finolex,havells)
-
-
-
2 X 1.5 sq. mm
1600
-
-
PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
Supplying, installation, testing & commissioning of 2 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
86
-
-
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
3
-
-
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
Supplying, installation, testing & commissioning of Voice command keypad 2 zone, with microphone assembly complete as required.
2
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including
connections and interconnections etc. as required.
-
-
-
Speaker cable Single pair, 2-core, 1.5 Per Square Metrem
900
-
-
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required
50
-
-
Supplying and fixing of 25mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
650
-
-
Surveillnace System (CCTV)
Providing and fixing COLORVU BULLET CCTV (Hickvision ModelDS-2CD1047G0-L or equivalent) IP 4 MP Color Vu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE, Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
27
-
-
Providing, fixing DOME NETWORK CCTV CAMERA ( Hikvison Model DS-2CD1343G0E-I or equivalent ) IP 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE; Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
45
-
-
SITC of 25X 100MTRS PTZ SPEED DOME CAMERA ( Hikvision Model DS-2DE4425IW-DE or equivalent) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25× optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, Two Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
2
-
-
SITC of 32 CHANNEL 4K H. 265+ NVR ( Hikvision Model DS-7732NI-K4 or equivalent), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160)resolution , incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port upto 6TB each, Two Years Warranty and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
1
-
-
SITC of Power Supply ISI MARK and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
4
-
-
SITC of RJ-45 Legrand make 6792 64 connector as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
20
-
-
SITC of 16 PORT POE SWITCH 75 WATTS as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
3
-
-
SITC of 8 PORT POE SWITCH 75 WATTS including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
9
-
-
SITC of DC Connector and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
20
-
-
Providing and fixing SAMSUNG Crystal 4K Pro 108 cm (43 inch) Ultra HD (4K) LED Smart TV with Voice Search (UA43AUE70AKLXL), (Black) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport . (Samsung /Sony make or its equivalent as approved by the Engineer incharge)
5
-
-
Providing and fixing Polycab make cctv 4+1 wiring for fixing of cameras in the existing PVC conduit as per requirement & three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
1955
-
-
Providing Hard disk (8TB hard disk Seagate make) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
4
-
-
Providing and fixing of Crotomak make 6 U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex,Lepose make or as approved by site engineer)
3
-
-
High Mast
Supply of 12.5 Metre long hot dip galvanized 12 Sided Polygonal Structure made up of High Tensile Steel Sheet confirming to BSEN 10025 S355 / ASTM 572 Grade 50 having Top diaMetre 150mm , bottom 360mm , Sheet Thickness 3mm/3mm suitable to use with wind Velocity 47 m/s as per IS 875 Part (iii) of 1987 with Base Plate 25mm thick. The Standard of Galvanization as per BS ISO 1461. The Mast included all accessories ( GI Lightening Arrestor , Galvanized Head Frame with Covered Canopy , Avaition light Bracket , Trailing Cable 5 core 2.5 Sq.mm Copper Conductor , Weather proof junction box , Plugs and Sockets , SS Wire Ropes 6mm AISI 316 Grade , Two Way Suspension system , Double Drum Winch , 3 Phase Electric Motor ( Power Tool for winch Operation) , Lantern Carriage for 6 LED luminaires , Winch & Motor mounting Bracket duly HDG including all the hardware to fix the accessories at site. The Mast Suitable to use with 6 number Symmetrical orientation 300W LED Floodlights. Make : Valmont/BAJAJ.
2
-
-
Supply of 300W LED Floodlight made up of Cast aluminium housing with heat resistant toughened glass cover having lumen efficiacy of 120 Lumens/watt including electronic driver and 10Kv surge protection device complete with all respect. Make : Wipro/Bajaj./philps
12
-
-
Supply of MS Control Panel with 32 Amp TPN MC incomer and Motor Control Circuit with Suitable Contactors ( Lowering Raising of Carriage) with Timer Facility complete with all respect.
2
-
-
Construction of suitable shallow foundation with 'M 25' grade concrete suitable size foundation bolts /anchor plates for the 16 mtr and 12.5 mtrs high mast considering the tested soil bearing capacity at site at 2 mt depth with all materials & labour. Complete foundation design & calculation on basis of the load bearing capacity of the soil.
2
-
-
Erection of the 12.5 mtr. high mast with the help of suitable eqipments and wiring of luminaires with all wiring material & labour.
2
-
-
Provision of GI pipe earthing for High Mast with 2.5M long 40mm dia. G.I. pipe including connection of High Mast earth terminal with 25x3mm GI flats with all materail & labour 2 NOS. PER MAST.
4
-
-
DG Set
Supply and commissioning of 62.5KVA silent type DG set Cat No. CS62.5D5P, Per cubic Metremins engine make Cat No. 4BTAA3.3-G11, Engine BHP 84,62.5 KVA Per cubic Metremins® diesel generating sets, powered by Per cubic Metremins ‘S Series’ engines, are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi-cylinder, conforming to BS 5514/ISO 3046. Alternator: Synchronous alternator of Stamford make suitable for continuous operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: › + 1.0 % Voltage regulation (max.) in static conditions › IP: 23 protection with insulation class H › Permissible overload of 10% for one hour in 12 hours of operation. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The control panel consists of following parts: Instrument cluster displaying water and lube oil temperature, lube oil pressure, engine RPM, running hours, battery charging current with LED Indications for battery charging failure, high water temperature and low lube oil pressure MCCB of suitable rating with overload and short circuit protection Combined Metre for voltage, amps and frequency, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing termination, Indicating lamps for “Load On” and “Set Running” Instrument fuses duly wired and ferruled. DG set suitably housed in CPCB-II approved acoustics enclosure with standard accessories.i.e control panel, fuel tank, Battries with leads .No AMF Panel shall be required
1
-
-
Supply and fixing of PVC insulated matt 2mtrx1mtrx3mm to prevent electric shock as reqd complete in all respects
3
-
-
MAIN POWER DISTRIBUTION PANELS
Main Panel for Parking Lot
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. The panel shall be floor Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. and shall be as approved by the Engineer Incharge1 No incomers250A complete with all protections and indicating lamps etc.) Outgoing 200 A TP MCCB 25 KA with TMD release O/L and S/C protection,2 x 125A , TP MCCB 25 KA with TMD release O/L and S/C protection ,4Nos 80A TP MCCB 25 KA with TMD release O/L and S/C protection ,complete with rotary handles, spreader links ,6Nos 40A TPN MCB 10KA , and 4 nos 63 AMP. SPN MCB . complete in all respects.
1
-
-
STREET LIGHT PANEL
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge
-
-
-
Incoming
1 Nos. 63A, FP,10 kA, MCB Bus bar
1 set of 63 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.
Outgoings
12 No. 6-32 A, SP, 10 kA, MCB Instruments
1 Set R Y B phase indicating lamps with protection fuses. 1 Lot of control wiring. 1 Set of designation plates.
2
-
-
EV Charging Station
Supplying, installing,testing and commissioning of Electic Vehicle Charging Station Kazam make Model Kazam 3.3, Product Dimensions 27 x 19 x 13.5 cm; 2.02 Kilograms, Item part number KZ001, Manufacturer Part Number KZ001, Material ABS PLASTIC, Colour White, Special Features Convenient to install, All weather and waterproof, Real time data analytics, IOT enabled charging, Wattage 3.3 KW, IP67 certified, Ip (max) 20 Amp, Vp(max) 280 Volts, Input voltage 1 Phase 230 V AC, Connectivity SIM Based, MCB & Fuse YES, Wire 3 wires ( live, neutral and earthing/ 2.5 sq mm), Output connector type 3 Pin socket, Output current 16A max, Output current 3.3KW, theft proof, B/W EVSE & CMS MQTT/TCP, All weather functionality YES Dust & water proof), Number of Outputs 1, Ambient Temperature -30C to 55C, Cooling: Natural. (Kazam or equivalent or as approved by the engineer incharge)
6
-
-
LIFTS
Supplying, installing, testing and commissioning of 8 passenger, 544 Per Kilogramme lift 4 Stop , Total Travel -12 M 1.0 M /S ECE Model NO ELITA MRL R22 13 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2400 mm W x 1800 mm D, CAR DIMENSIONS (W x D x H - mm) :1450 mm W x1450 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Centre opening (ACO 2P) doors DOOR OPENING (W x H - mm) :900 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black bacPer Kilogrammeround with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.
2
-
-
Supplying, installing, testing and commissioning of 8 passenger, 544 Per Kilogramme lift 3 Stop , Total Travel -12 M 1.0 M /S ECE Model NO ELITA MRL R22 8 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2400 mm W x 1800 mm D, CAR DIMENSIONS (W x D x H - mm) :1450 mm W x1450 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Centre opening (ACO 2P) doors DOOR OPENING (W x H - mm) :900 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black bacPer Kilogrammeround with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.
2
-
-
SITC of Outdoor advertising bill board minimum of size 6ft x 6ft with P4 Led with Master control box, including wiring and connections complete in all respect, for bridge or pole or streets having stainless steel cover with high bright LED light cover with milling effect and Computer for operation of HP make Core i3 (8 GB DDR4/1 TB/256 GB SSD/Windows 11 Home/21.5 Inch Screen/22-dd2456) including carriage of material in all lead and lifts through mechanical and manual transport . (HP/Lenovo/Asus make for computer or its equivalent as approved by the Engineer incharge)
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements