Himachal Pradesh Tourism Development Corporation Tender

Dismanlting wooden boardings in linning of walls and partitions, excluding supporting members but including stacking of serviceable materials in specified manners and disposal of unserviceable materials thikness above 25mm to 40 mm as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. as per direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 0.62 mm thick prepainted steel sheet Tata Durashine or equivelent make (as approved by Engineer-In-Charge) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mocrons over 5 microns primer coating including fixing with self driven steel screws / prepainted iron J or L hooks or seam bolts with prepainted limpet and rubber washers complete with all accesoriees as required as per the detailed drawings and direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing ridges or hips 62 cm overall with 0.62 mm thick prepainted steel sheets Tata Durashine or equivalent make (as approved by Engineer-In-Charge) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing valleys 62 cm overall with 0.62 mm thick prepainted steel sheets Tata Durashine or equivelent make (as approved by Engineer-In-Charge) in roofing withhot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain prepainted sheet gutter (as approved by Engineer-In-Charge) with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.0.80 mm thick as per the direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing Tata Durashine or equivalent make (as approved by Engineer-In-Charge) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing on wall face PVC (D-Plast) Finolex or equivalent make (as approved by Engineer-In-Charge) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 100mm dia pipes as per the direction of Engineer-in-Charge including carriage of material upto all leads, lifts and heights.

Providing and fixing on wall faces PVC (D-Plast) Finolex or equivalent make (as approved by Engineer-In-Charge) accessories for rain water pipes including filling the joints with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of material upto all leads, lifts and heights. . PVC Plain bend 100mm dia

Providing and fixing on wall faces PVC (D-Plast) Finolex or equivalent make (as approved by Engineer-In-Charge) accessories for rain water pipes including filling the joints with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of material upto all leads, lifts and heights. PVC shoe 100mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design (as approved by Engineer-In-Charge) to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete as per the direction of Engineer-in-Charge including carriage of material upto all leads, lifts and heights. 110 mm

Providing and fixing 6 mm thick Suede finish Greenlam or equivalent exterior grade Cladding (high pressure laminate) made up of 1300 mm x 3050 mm or required size manufactured under EN 438-2&3:2005 or equivalent standard. Cladding should be made with GLE technology & double layer UV protection process under high pressure, thermosetting phenolic resin treated exclusive & certified exterior grade decorative paper (UV Resistant) (as approved by Engineer-In-Charge) on both sides with high grade craft paper in between. Both the decorative and craft paper to be made of virgin pulp. Clad should be resistant to water immersion characteristic with permissble increase on thickness and mass less than 0.60% and have the density greater than 1.35 gm/cc, UV resistance on grey scale measurement wil be measured greater than or equals to 4, with flame retardant fulfilled the criteria under EN-13501-1:2007 with classification of BS 1D0 standard property, moisture resistant, impact resistant, termite resistant, scratch resistant, weather and climate shock resistant high pressure thermo setting resin treated balanced compact laminates clad (The manufacturer should provide 10 years waranty cerficate on manufacturing and moisture related defects). A green product with green guard gold certification where VOC emmission level is less than 0.22 PPm. Anti-bactirial and anti-fungal property under JISZ-2801:2000. Clads will be installed on aluminium tubes at 500 mm c/c distance with special L-brackets. There will be special fixing treatment on all the corner sections. Aluminium box size will be 25 mm x 50 mm. Boards will be fixed on the aluminium chanels with colour matched rivets and brackets through 8 mm drill hole in boards and 5 mm dia drill holes in aluminium box. Rivets will be installed by automatic rivet guns. Shade design of clad should be finalized under direction of Engineer in charge including carriage of materials within all leads, lifts and heights.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding including carriage of materials within all leads, lifts and heights.