Himachal Pradesh Tourism Development Corporation Tender

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all lead & lifts through manually and mechanical means approval dumping side as per direction Engineer in Charge. In cement mortar.

Providing and laying cement concrete 1:4:8 (1cement :4sand:8graded stone aggregate 40 mm nominal size) and curing complete excluding cost of from work in foundation and plinths including carriage of materials in all lead and lifts.

2nd class Brick work using common burnt clay building bricks cement master 1:6 (1 cement : 6sand) Super-structure above plinth level upto floor two level including carriage of materials in all lead and lifts.

2nd class Half brick mansonry in common burnt clay building bricks in cement master 1:4 (1 cement : 4sand) including carriage of materials in all lead and lifts.

Providing wood work in frames of door window and other frames wrought framed and fixed in position in 1st class Deodar wood including carriage of materials in all lead and lifts.

Providing and fixing flush door shutters core of block board construction with frame of first class indian teak ply veneering with vertical grains of cross band and face veneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutter including carriage of materials in all leads and lifts.35 mm thick including black enamelled M.S. butt hinges.

Providing and fixing 40mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts. 40 mm thick

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts. 200x10mm

150x10mm

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolt anodized colour and shade with bolts and nuts screws etc complete including carriage of materials in all leads and lifts. 250x16mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour &shade with necessary screws etc complete including carriage of materials in all leads and lifts. 125 mm

100 mm

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc with M.S. Flats, square or round bars with round heahed bolts and nuts or by screws including carriage of materials in all leads and lifts. Ornamental Crill.

Providing and fixing plain skirting with butt joining and screws (frame work and cover fillets to be measured and paid for separtaly) 20mm thick 2nd class kail wood including carriage of materials in all leads and lifts.

Providing wood work in frames of false ceilling partitions etc sawn and put-up in position 2nd class kail wood including carriage of materials in all leads and lifts.

Providing and fixing 12mm thick water proof kit ply of standard quality black cobbra green ply etc and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

Providing and fixing plain square edged cover fillets (beading) 50mmx12mm section, with wood screws in ceiling anf lining including mitring at junction 1st class teak wood including carriage of materials in all leads and lifts.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120grams/Sqm. Both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to from a grid of 1200x600 mm and secondary cross 'T' of length 600mm and size 24x25 mm made of 0.30 mm thick (minimum)n sheet to be interlocking at middle of the 1200x600 mm panel to from grids of 600x600mmand wall angle of size 24x234x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required a) G.I. metal ceiling lay in perfotrated tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8mm drop, made of G.I. sheet having galvanizing of 100 Grm./Sqm. (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC (noise reduction coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum) including factory painted after bending and perforation and backed with a black glass fiber acoustical fleece.

Supplying and fixing glass panes with putty and nails including carriage of materials in all lead and lifts. 12mm thick toughened glass.

Providing and fixing special lock in main entry door of reception and restaurant including carriage of materials in all lead and lifts.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floor and cover plates etc complete as per the direction of Engineer-in-charge i/c making good the floors.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vertrified tiles 600x600 mm x 10mm Kazaria make oe equivalent Nitco, Rack etc manufactured of approveed shade and colour in flooring, treads of step and landing laid over 12mm thick cement mortar 1:3 (1cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials in all leads and lifts.

Providing and laying Duro stone vertrified tiles (300x300mmx10mm) Kazaria make or equivalant Nitco, Rack etc grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials in all leads and lifts.

8 mm thick stone tile work for wall lining over 12mm thick bed of cement mortan 1:3 (1cement :3sand) and cement slurry @3.3 Kg/Sqm including pointing in white cement complete shade, granite stone ofany colour any shade as approved by Engineer-in-charge including carriage of materials in all lead and lifts.

Providing and fixing 8 to 10 mm thick coloured ceramic tiles Kazaria make or equivalant Nitco, Rack etc 600x300 mm of approved shade and quality in skirting laid over 12 mm thick cement mortar 1:3 (1cement : 3 sand) joining with cement slurry mixed with pigment as required complete.

Steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying priming a coat of red lead paint including carriage of materials in all leads and lifts. ) In gratings framed guard bars ladders, railings brackets and similar works.

Rolling shutters operated by bevel gear box and crank handle exceeding 12.0 sq.m. and upto 25.0 sq.m. in area (average say 18.5 sq.m) including carriage of materials in all leads and lifts.

Providing and fixing top cover for rolling shutters including carriage of materials in all leads and lifts. Shutters having width 3.5 metre and above.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortan drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all lead and lifts.

Applying one coat of Acrylic primer (spectrum or equivalent of super qulaity) on new concrete/masonry/plastered surfaces by throughly brushing the surface free from mortan droppings and other foreign matters, sand papering the surface smooth complete including carriage of materials in all lead and lifts.

Painting one coat (excluding priming coat) on previously painted wood and wood based surface with ready-mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white of approved brand including carriage of materials in all lead and lifts.

Extra for every subsequent coat of paint including carriage of materials in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads and lifts. Readymixed paint brushing wood primer pink.

Painting two coats (execluding priming coat) on new wood and wood based surfaces, with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping including carriage of materials in all leads and lifts. Readymixed paint other then white.

Distempering (one coat) with oil bound washable distemper of approved brand and manufature and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth including carriage of materials in all leads and lifts.

Extra for every sub sequent coat of distempering with oil bound washable distemper of approved brand and manufacture.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surface (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt, loose or softened paint including carriage of materials in all leads and lifts.

Extra for every sub sequent etc finishing with cement paint on ceiling and/or slopping roofs including carriage of materials in all leads and lifts.

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not execeeding 80mm in girth and finishing even and smooth cement mortar 1:4 (1cement : 4 sand) including carriage of materials in all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt, dust and other foreign matter including carriage of materials in all leads and lifts. with readymixed paint other than white

PART "B" WATER SUPPLY & SAINTARY INSTALLATION Providing and fixing pillar Tap long neck Jal make cat No. 3021 or equilant cera/jaquar etc including carriage of materials in all leads and lifts.

Providing and fixing looking mirror 1200x900 mm beveled edge 4 mm thick superior glass modiguard of approved make with 1st class deodar wood frame including 6mm thick water proof ply back side complete as per desidn including carriage of material in all lead and lifts.

Providing and fixing 15mm dia C.P.. Bib tap Jal make cat No. 3032 or equilant cera/jaquar complete including carriage of material in all lead and lifts.

Providing and fixing vitreous china white wash down water closet (European type W.C. pan) with integral "P" or "S" trap complete studieo set including jointing the trap with soil pipe in cement mortar 1:1 (1cement : 1 sand) including carriage of materials in all lead and lifts. cera make Cat No. S1031101, S1060101, 131510101, 31810102 set or equilant Hind ware/jaqura make etc.

Providing and fixing 100mm C.P. grating heavy quality for floor trap of chilly make including carriage of materials in all lead and lifts.

Providing and fixing vitreous china coloured wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting hole and making good the same but excluding fittings including carriage of materials in all lead and lifts cera make cat No. S2040105, S2090101 or equilant Hind ware/jaquar make etc.

Providing and fixing C.P. waste for sink 32 mm dia complete with fittings including carriage of materials.

Providing and fixing C.P. health faucet of approved make heavy duty seat including carriage of materials in all lead and lifts.

Providing and fixing C.P. soap tray with C.P. brass bracket fixed with Rawl plug and screws including carriage of materials in all leads and lifts, Jal make Cat. No. 26540 or equilant cera/Jaguar make etc.