Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation - HPTDC Tender
Civil Works
Eprocure
Opening Date16 Mar 2021
Closing Date16 Mar 2021
Tender Amount₹ 10,78,89,431
Costs
EMD
₹ 21,58,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HPTDC_45604_1Bid Award Id
ViewTender No
FCI/IHM/Dharamshala/21/1Tender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://http://hptdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
a) Extra for mechanical lead upto 1 kms
618.26
-
-
b) Extra for mechanical lead upto 5 kms
1442.62
-
-
Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete including carriage of material in all leads and lifts.
198.9
-
-
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. a) Foundation, footings, basis of columns and mass concrete.
1230.54
-
-
b) Flat surfaces such as soffits and suspended floor, roofs landing and like plain upto 200 mm in thickness.
4150.2
-
-
c) Vertical surface such as wall (any thickness partitions and the like including attached pilasters, plinth and string course of the like.
959.74
-
-
d) Columns, pillars, posts and struts square, rectangular in plain.
624.66
-
-
e) Columns, pillars, posts and struts circular in plan.
80.08
-
-
f) Stair cases ( except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.
449.8
-
-
g) Beams, cantilever, girders and lintel:- Side of soffits of beam, beams haunching cantilevers bressumers and not exceeding 1 meter in depth in all heights from floor.
3502.98
-
-
h) Edges of slab & breaks in floor upto 200 mm width
586.96
-
-
Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all leads and lifts.
140.16
-
-
Providing and laying cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work including carriage of materials in all lead, lifts. a) Curves , steps and the like
6.23
-
-
Providing and laying cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work including carriage of materials in all lead, lifts. b) Foundation and plinth.
159.5
-
-
Providing and laying cement concrete 1:5:10 (1cement: 5 sand: 10 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights..
25.74
-
-
Providing and laying cement concrete mix M:25 1:1:2 (1 cement :1: Sand : 2 graded stone aggregate 20 mm nominal size and curing complete excluding cost of form work and rainforced concrete work in a) Foundation and plinth :
530.88
-
-
b) Column, pillars, posts and struts upto floor two level :
126.39
-
-
c) Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel
1480.06
-
-
d) Walls (any thickness but not less than 0.10 mt. thk.) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation upto all heights.
89.37
-
-
e) Stair cases with sloping or stepped soffits excluding landing
49.69
-
-
Providing mild steel/tor steel reinforcement for RCC work including bending, binding also cost of binding wire and placing in position complete upto all floor level including carriage of materials in all lead and lifts. Tor steel (TATA/SAIL MAKE)
341458
-
-
Brick work 2nd class using common burnt clay building bricks in superstructure above plinths level in cement mortar 1:6 (1cement:6sand) including carriage of materials in all leads, lifts and upto all heights.
642.34
-
-
Half brick masonry in common burnt clay building bricks 2nd class in superstructure in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads, lifts and upto all heights.
446.62
-
-
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1 cement:6sand) including carriage of materials in all leads, lifts and upto all heightfoundation and plinth.
91.51
-
-
Random rubble masonry/ polygonal rubble masonry (uncoursed/ brought to courses) with hard stones of approved quality infoundation, plinth and in superstructure up to all heights including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) in cement mortar 1:6 (1 cement : 6 sand) in breast and retaining walls including carriage of materials in all leads, lifts and heights.
111.21
-
-
Stone/boulder filling behind retaining wall up to all heights including carriage of materials within all lead and lifts.
282.65
-
-
Square rubble masonary coursed with hard stone of approved quality in superstructure in retaining wall/breast walls including raking out joints, including carriage of materials in all lead, lifts and height. In cement morter 1:6 (1Cement : 6 sand).
72.45
-
-
Stone soiling properly hand packed filling interstices with kharanjsa stone cosolidating manually including carrige of material up to all leads and lifts i/c ramming manually.
217
-
-
Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position in Sal wood including carriage of materials in all lead, lifts and upto all heights.
10.8
-
-
Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class commercial ply veneering with vertical grains or cross bends and face veneering on one face bend and commercial ply veneering with vertical grains of cross band and face veneer on other face of shutter, including carriage of materials in all leads and lifts. 35 mm thick including black enameled M.S. butt hinges. Green Lam /Merino Century make or equivelent.
163.9
-
-
Providing and fixing flush door shutters decorative type solid core of block board construction with frames of first class hard wood and well matched first class Indian teak wood ply veneering with vertical grains or cross bends and face veneering on one face bend and commercial ply veneering with vertical grains of cross band and face veneer on other face of shutter, including carriage of materials in all leads and lifts including the cost of spirit polish of requried shade in both the sides including the cost of lipping as well. 35 mm thick including black enameled M.S. butt hinges. Green Lam /Merino Century make or equivelent.
40.59
-
-
Providing and fixing 40mm thick panelled glazed or panelled and glazed shutters 2nd class deodar wood for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts.
44.37
-
-
Providing and Fixing Glass panes with denter's metal putty/wooden fillet (where ever required) of deodar Ist class in fixed portions of windows including carriage of materials within all leads lift and height. a) Plate glass 5.5 mm thick. Modi Guard/Saint Govind or equilvelent.
61.05
-
-
Providing and Fixing Glass panes with denter's metal putty/wooden fillet (where ever required) of deodar Ist class in fixed portions of windows including carriage of materials within all leads lift and height. b) Glass 4mm thick Modi Guar/Saint Govind or equilvelent.
57.06
-
-
Providing and fixing 40x3 mm flat iron hold fast 40 Cm. long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (1cement: 3sand :6graded stone aggregate of 20 mm nominal size including carriage of materials in all lead, lift and height.
574
-
-
Providing & fixing 75mmx60mm rounded hand rail in straight length complete in Ist class Deodar wood as per drawing / design approved by Architect. Extra for hand rail if sunk to receive iron core and for round/moulded portions including carriage of materials in all lead, lift and height.
80.15
-
-
Providing & fixing anodised aluminium sliding door bolt anodised color & shade with bolts & nuts & screw complete including carraige of materials within all lead lifts and height. a) 300x16mm. Paragon/Flora/Everlite or equivalent.
48
-
-
Providing & fixing anodised aluminium sliding door bolt anodised color & shade with bolts & nuts & screw complete including carraige of materials within all lead lifts and height. b) 250x16mm Paragon/Flora/Everlite or equivalent.
72
-
-
Providfing & fixing aluminium tower bolt barrel type and anodised transparent or dyed to requried Shade & color with screws etc & complete as per approved brand from the Architect including carraige of materials within all lead lifts and height. a) 250x 10mm
110
-
-
Providfing & fixing aluminium tower bolt barrel type and anodised transparent or dyed to requried Shade & color with screws etc & complete as per approved brand from the Architect including carraige of materials within all lead lifts and height. b) 200 x 10mm
80
-
-
Providing & fixnig anodised aluminium handles transparent or dyed to required shade with necessary screws complete as per approved brand from the Engineer-In -Charge including carraige of materials within all lead lifts and height. Paragon/Flora/Everlite or equivalent. a) 125mm
140
-
-
Providing & fixnig anodised aluminium handles transparent or dyed to required shade with necessary screws complete as per approved brand from the Architect including carraige of materials within all lead lifts and height. b) 100mm
138
-
-
Providing and fixing bright finished brass 100mm ACME/ Godrej or equivelent mortice latch with pair of levers and handles with necessary screws etc. Indian make of approved quality including carriage of materials in all lead and lift.
10
-
-
Providing and fixing oxidised MS single action spring hinges bright finished with screws complete isi mark heavy duty as per approved by the Engineer In Charge including carriage of materials in all lead and lift.125mm Universal/Everest or equivalent.
50
-
-
Providing and fixing oxidised MS double action spring hinges bright finished with screws complete isi mark heavy duty as per approved by the Engineer In Charge including carriage of materials in all lead and lift. 150mm Universal/Everest or equivalent.
6
-
-
Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete inlcuidng carriage of materials within all leads and lifs.
76
-
-
Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of materials with in all lead and lifts. a) For doors windows and ventilatiors and glazed partitions frames. (Jindal/Hindalco make or equivelent.
5244.6
-
-
b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately)
2823
-
-
Extra for powder coating
8067.6
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading including carriage of materials within lead and lifts. a) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. Modi Guard Saint Govind or equivalent.
155.7
-
-
b) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm Modi Guard Saint Govind or equivalent.
225.09
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors inlcuding carraige of materials within al leads and lifts. Universal/Everlite or equivalent.
20
-
-
50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete inlcuding carriage of materials within all leads and lifts.
2228
-
-
b) Extra for providing & fixing glass strips 40mm wide & 4mm thick including finishing complete inlcuding carriage of materials within all leads and lifts.
2228
-
-
Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor. 20 mm thick including finishing complete inlcuding carriage of materials within all leads and lifts.
218.17
-
-
25mm thick Kota stone slab flooring on base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbbing and kota polishing complete, including carriage of materials in all leads, lifts and heights.
1080.69
-
-
25 mm thick Kota stone slab flooring in risers of steps, skirting dado and piller base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbbing and kota polishing complete, including carriage of materials in all leads, lifts and heights.
12.56
-
-
Providing and fixing 8 to 10 mm thick coloured Vitrified tiles Kajaria/RAK/Nitco or equivalent make of size 600x600MM in flooring treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement:3sand) finished with flush Pointing in white cement pigment to match the shade of tiles upto floor two level and above including all leads lifts and carriage of materials. (Basic rate not less than 65/- per sqft. )
1304.9
-
-
Providing and laying 20 mm thick granite stone in flooring 20mm(average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone inlcuding rubbing and polishing complete including crraige of materials with in all leads and lifts. (Basic rate not less then 250/- Sqft
316.57
-
-
Providing and fixing coloured/ printed vertified tiles of 8 to 10 mm thickness in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry including carriage of materials in all lead and lifts and heights, Nitco/ Kajaria/ Rak of minimum size 600x300 mm or 450mm x 300mm (basic rate not less than Rs.55/- per Sqft. including GST)
1690.55
-
-
Providing and fixing 0.60mm to 0.62mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge inlcuding carriage of materials within al leads and lifts. TATA or equivalent
2352.17
-
-
Providing and fixing ridges or hips 60 cm overall with 0.60mm to 0.62mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges inlcuding carriage of materials within all leads and lifs Century Well/TATA or equivalent
280.31
-
-
Providing and fixing valley 60 cm overall 0.60 to 0.62 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge inlcuding carraige of materials within all leads and lifts. Century Well/TATA or equivalent
117
-
-
Providing and fixing flushing 38cm overall with 0.60mm to 0.62 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. TATA or equivalent
128.18
-
-
Providing and fixing rolled cold M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)
492.79
-
-
Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint, including all leads, lifts and heights,a) In beams joists channels, angels, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.
705.6
-
-
b) In gratings framed guard bars, ladders, railing, brackets and similar works.
100.56
-
-
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring inlcuding carriage of materials within all leads and lifts. a) Shutters having width 3.5 metres and above.
9.45
-
-
Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters inlcuding carriage of materials within all leads and lifts.
2
-
-
Providing and fixing top cover for rolling shutters. Shutters having width 3.5 metre and above inlcuding carriage of materials within all leads and lifts.
4.2
-
-
Providing & fixing steel glaxed windows and ventilators of standard rolled steel /Z sections , joints mitred and welded with 16x3.15mm lugs 10cm. Long embedded in ceemnt concrete blocks 15cmx10cmx10cm size of 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screwd or rawl plug and screws or with fixing clips or with bolts and nuts as requried and iron fittings , including providing & fixing of glass panes with glazing clips and special metal sash putty of apporved make complete including applying a priming coat of red lead paint as per drawings inlcuding carriage of materilas within all leads and lifts.
334.53
-
-
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign, including carriage of materials in all leads, lifts and heights, in : a) Readymixed paint brushing priming for enamel any shade to the entire satisfaction of Engineer -In- Charge.
518.58
-
-
Painting two or more coats excluding priming coat on new wood & other wood based surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt & dust) inlcuding carriage of materials within all leads and lifts. With ready mixed paint any shade to the entire satisfaction of Engineer -in-Charge.
518.58
-
-
Applying two coats of wood preservative paint on new wood & wood bsed surface after & including preparing the surface by thoroughly cleaning oil grease dirt & other matter and sand papering & knotting including carriage of materials within all leads and lifts.
518.58
-
-
Painting two or more coats (excluding prime coat) on steel & metal surface with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foregin matter, sand papering and stoping, including carriage of materials in all leads, lifts and heights, in : a) Readymixed paint any shade to the entire satisfaction of Engineer-in-Charge.
168
-
-
Polishing two or more coats with melamine polish on new wood & wood based surfaces to give an even shade including cleanign the surface of all dirt, dust & sand paper smooth & including a coat of wood filler to the entire satisfaction of Architect inlcuding carriage of materials within all leads and lifts.
281.96
-
-
Applying priming coat on new concrete/ masonry/ asbestos cement/plastered surface after & including by preparing surfaces thoroughly cleaning oil grease , dirt & other foreign matter & sand papering as requried a) Ready mixed primer inlcuding carriage of materials within all leads and lifts.
3503.71
-
-
Painting two or more coats (excluding priming on new concrete masonry plastered surface with ready made paint brushing for use on floors to give an even shade including cleaning the surfaces of all dirt, dust & other foreign matters & sand papering upto the entire satisfaction of engineer-in-charge / Architect including carriage of materials within all leads and lifts. White or other paint
3503.71
-
-
6mm thick cement plaster in ceiling Cement mortar 1:3 (1 Cement : 3 Sand) inlcuding carriage of materials withinn all leads lifts and heights.
3467.81
-
-
6mm thick cement plaster in ceiling Cement mortar 1:4 (1 Cement : 4 Sand) inlcuding carriage of materials withinn all leads lifts and heights.
7006.29
-
-
20 mm cement plaster in two coats backing coat 15 mm and finishing coat 5 mm thk. on rough side of brick/ stone masonry walls for interior plastering including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth, including carriage of materials in all leads, lifts and heights. a) Cement mortar 1:5 (1 cement : 5 sand)
2395.09
-
-
Distempering two coats with oil bound washable distemper 2 or more coats of approved brand and manufacture and of requried shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even abd sand papered smooth. Priming coat with distemper primer upto the entire satisfaction of Engineer-in-Charge/ Architect including carraige of materials within all leads lifts and heights.
6970.95
-
-
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt & remains of loose powdered materials inlcuding carriage of materals within all leads lifts and heights.
2395.09
-
-
Wall painting in two coats with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth for making the surface, including carriage of materials in all leads, lifts and heights.
645
-
-
Providing and applying wall putty (Birla White or equivalent) to make the surface even and smooth including removal foreign particles and cement plaster droppings etc. including carriage of materials in all leads, lifts and heights.
6970.95
-
-
WS&SI Work Providing and fixing Polyethylene – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings including carraige of materials within all leads and lifts. Pipe, 16 mm OD Supreme/Finolex/Astral or equivalent.
483
-
-
Pipe, 20 mm OD
215
-
-
25 mm OD pipe).
198
-
-
Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. Pipe, 16 mm OD including carriage of materials within all leads and lifts. Supreme/Finolex/Astral or equivalent.
72
-
-
Pipe, 20 mm OD
78
-
-
25 mm OD pipe).
46
-
-
20 MM x all branches.
24
-
-
25 MM x with all branches.
12
-
-
Female branch TEE. 16 X 16 X 15 mm thread.
12
-
-
20 X 20 X 20 mm thread.
24
-
-
25 X 25 x 25 mm thread.
30
-
-
Female ELBOW 16 X 15 mm thread.
72
-
-
16 X 20 mm thread.
48
-
-
20 X 20 mm thread.
30
-
-
25 x 25 mm thread.
20
-
-
Male thread connector:- 16 X 15 mm thread.
112
-
-
16 X 20 mm thread.
64
-
-
20 X 20 mm thread.
16
-
-
25 x 25 mm thread.
20
-
-
Female thread connector:- 16 X 15 mm thread.
112
-
-
16 X 20 mm thread.
64
-
-
20 X 20 mm thread.
16
-
-
25 x 25 mm thread.
20
-
-
Couplers:- Pipe, 16 mm OD
78
-
-
Pipe, 20 mm OD
48
-
-
25 mm OD pipe).
36
-
-
REDUCER 20X16MM
36
-
-
25X16MM
24
-
-
25X20MM
12
-
-
Providing and fixing PE-AL-PE- composite internal seal compression fittings as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etc.( This type of fitting to be used for hot water supply only). Pipe, 16 mm OD including carriage of materials within all leads and lifts. Supreme/Finolex/Astral or equivalent.
30
-
-
Female branch TEE. 16 X 16 X 15 mm thread.
30
-
-
Female ELBOW 16 X 15 mm thread.
56
-
-
Male thread connector:- 16 X 15 mm thread.
32
-
-
Female thread connector:- 16 X 15 mm thread.
32
-
-
Couplers:- Pipe, 16 mm OD
12
-
-
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- 1000 litres net capacity tank Sintex/Vectus/Jai Bharat or equivalent including carriage of materials within all leads and lifts.
10
-
-
Providing and fixing PVC SWR pipes, including all PVC plain & threaded fittings This includes jointing of pipes & fittings with one step PVC solvent cement ,trenching ,refilling & testing of joints complete 110 mm nominal inner dia Pipes including carriage of materials within all leads and lifts. Supreme/Finolex/Astral or equivalent.
245
-
-
Providing and fixing PVC SWR pipes, including all PVC plain & threaded fittings This includes jointing of pipes & fittings with one step PVC solvent cement ,trenching ,refilling & testing of joints complete 150 mm nominal inner dia Pipes including carriage of materials within all leads and lifts. Supreme/Finolex/Astral or equivalent.
390
-
-
Providing and fixing (PVC) pipes, having thermal stability for hot & cold water supply including all UPVC plain & threaded fittings This includes jointing of pipes & fittings with one step PVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. a) 110mm including carriage of materials within all leads and lifts. Supreme/Finolex/Astral or equivalent.
54
-
-
b) 150mm
72
-
-
c) 110mm
24
-
-
d) 150mm
30
-
-
DOOR TEE a) 110mm
24
-
-
b) 150 mm
24
-
-
REDUCER TEE a) 110 X 75 mm
100
-
-
b) 150X110
32
-
-
COLLORS a) 150mm
24
-
-
b) 110 mm
48
-
-
Providing & Fixing 110 mm X 90 mm PVC floor traps screwed down or hinged type of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. Finolex/Supreme or equivalent.
67
-
-
Providing & Fixing G.I. inlet connections for flush pipe with wc pan pipes (confirming to B.I.S.) including carriage of materials all leads and lifts.
25
-
-
Providing & Fixing C.P. brass flush pipe for urinals with spreader complete with fittings (confirming to B.I.S.) including all leads and lifts.
12
-
-
Providing & Fixing 100 mm C.P. grating chilly make for floor traps of approved shade and make including carriage of materials all leads and lifts.
67
-
-
Providing & Fixing 600x1200mm glass shelf with C.P. brass bracket and guard rail complete as approved by Engineer-In-Charge with necessary screws including carriage of materials all leads and lifts.
2
-
-
Providing & Fixing C.P. Jet Sprey of Jaquar/Jal/Cera or equivelent for WC seats including carriage of materials within all leads and lifts.
25
-
-
Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orissa Pattern including carriage of materials within all leads and lifts. Cera/Hindwere/Jal make or equivalent.
8
-
-
Providing and fixing 100 mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1(1 cement : 1 sand) PVC including carriage of materials within all leads and lifts.
8
-
-
Providing and fixing in cement mortar 1:3 (1 cement:3 sand), a pair of vitreous China 250mm x 130mmx30mm foot rests for long pattern squatting pan water closet including carriage of materials within all leads and lifts. Cera/Hindwere/Jal make or equivalents.
4
-
-
Providing and fixing to wall ceiling and floor vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) inlcluding carriage of materials within all leads and lfifs. Cera/Hindwere/Jal make or equivalents.
8
-
-
Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia Cera/Hindwere/Jal make or equivalents.
16
-
-
Providing and fixing brass full way valve with wheel:- 15mm nominal bore Zolato/Leader or equivelent.
12
-
-
20mm nominal bore
12
-
-
25mm nominal bore
6
-
-
Providing and fixing C.P. 2 way bib cock of approved quality conforming to IS standards 15 mm nominal bore Jaquar product no.SOL-6041 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
25
-
-
Providing and fixing C.P. piller cock long neck of approved quality conforming to IS standards 15 mm nominal bore Jaquar product no.CQT-23021B/LYR-38011 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
30
-
-
Providing and fixing C.P. Single lever basin mixer WITH POP UP WASTE AND 450MM LONG BRAIDED HOSES. Jaquar product no.LYR-38051B or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P. Angular stop cock with wall flange conforming to IS standards of approved quality 15 mm nominal bore Jaquar product no.CQT-23059 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
72
-
-
Providing and fixing C.P. single lever wall mixer with provision of hand shower but without hand shower Jaquar product no.LYR-38119 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P. Flush cock with wall flange 25 MM Jaquar product no.LYR-38083 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P. Soap dispenser with metallic bottle Jaquar product no.ACN-1137N or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
8
-
-
Providing and fixing C.P.Towel rail 450 MM long for wash basin area Jaquar product no.ACN-1111N or equivalent series of Jal/Cera make or equivelent series of Cera/Jal make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P.soap dish holder Jaquar product no.ACN-1131N or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
26
-
-
Providing and fixing C.P.toilet roll holder Jaquar product no.ACN-1151N or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P.Health faucet with 1.00 metre long easy flex tube in chrome finish & well hook Jaquar product no.ALD-579 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P.bottle trap 32 MM size with 300MM & 190MM long connection pipes & wall flange Jaquar product no.ALD-769L300 X 190 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P.waste coupling 32 MM size half thread with 80 MM high ALD-709 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing C.P.over head shower round 140 MM dia chrome plated with grey face plate with rubit cleaning systemJaquar product no.OHS-1769 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
14
-
-
Providing and fixing WC seat Jaquar Model SLS-WHT-6851S220PP or equivalent series of Jal/Cera make with cistern and soft closing seat cover complete including carriage of materials within all leads and lifts.
17
-
-
Providing and fixing wash basin of size 160 X 495 X 365 counter top type JAQUAR MODEL NO. FNS-WHT-40701 or equivalent series of Jal/Cera make Under Counter Basin with Fixing Accessories, Size: 595x400x195mm , Shape: Rectangular including carriage of materials within all leads and lifts.
9
-
-
Providing and fixing wash basin of size 200 X 550 X 400 full pedestal type JAQUAR MODEL NO.LYS-WHT-38801 or equivalent series of Jal/Cera make including carriage of materials within all leads and lifts.
9
-
-
Providing and fixing WASH BASIN FNS-WHT-40931 or equivalent series of Jal/Cera makeTable Top Basin, Size: 500x420x200 mm inlcuding carriage of amterials within all leads and lifts.
2
-
-
Providing and fixing Urinal bowl URS-WHT-13255 or equivalent series of Jal/Cera make Urinal without sensor with Fixing Accessories, Size: 480x300x740 mm inlcuding carriage of materials within all leads and lifts.
10
-
-
Providing and fixing 8mm thick toughened/Froseted glass partion curved/recangular shaped chrome finish of Jaguar make CAT No. JSE-CHR-810UC450X or equivelent make.
11
-
-
Providing and fixing Urinal Cistern Jaquar make CAT No. WHC-WHT-184A or equivelent make.
12
-
-
Providing and fixing CP Sink Cock with Swinging Casted Spout with Aerator.Sink Cock with ‘U’ shape Bend Pipe Spout Jaquar FLR-5355N or equivalent series of Jal/Cera make Sink Cock with Provision for Connection to RO from rear side & Swinging Spout Flow rate: 14.43 ℓ/min* including carriage of materials within all leads and lifts.
9
-
-
Providing and fixing stoneware gully trap grade 'A' complete with C.I. grating, C.R. masonry in cement mortar 1:6 chamber and water tight C .I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.78kg. 180mmx150mm size P or R type
18
-
-
Constructing brick masonary chamber underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. including carriage of materials within all leads and lifts. a) Inside dimensions 600 mm x 850 mm x 450 mm deep for pipe line with three or more inlets. .
24
-
-
b) Extra for every additional depth of 0.10 metre or part thereof beyond 450 mm for brick masonry chamber:
24
-
-
Constructing manhole with R.C.C top slab in1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: Inside size 800 mm x 800 mm and 1000 mm deep including C.I cover with frame (Light duty single seal pattern - 1) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) With 150mm thick walls of R.C.C 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) complete from work and reinforcement with 6mm bars not exceeding 150mm centres both ways including carriage of materials within all leads and lifts.
3
-
-
Supplying fixing PVC Cover 300 mmx300 mm with frame for gully trap (standard pattern) the weight of cover to the not less than 4.53kg. including carriage of materials within all leads and lifts.
18
-
-
EI Work -Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads and lifts.. Group A.
30
-
-
Group C.
238
-
-
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way, 5/6 amps piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads and lifts.. a) Group C.
7
-
-
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required including carriage of materials within all leads and lifts..
81
-
-
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required including carriage of materials within all leads and lifts.
29
-
-
S/F Metal boxes: Supplying and fixing of following size (Nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required 100mm.x100mm.x60mm. Deep including carriage of materials within all leads and lifts.
7
-
-
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of materials within all leads and lifts.:- 25 mm. dia
201
-
-
Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. a)PVC insulated HRFR LS Copper conductor 1.5 Sq. mm. 2x1.5 Sq. mm including carriage of materials within all leads and lifts.
367
-
-
B) PVC insulated HRFR LS Copper conductor 4.0 Sq. mm. 2x4.0 Sq. mm.
205
-
-
4x4.0 Sq. mm.
207
-
-
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of materials within all leads and lifts.. a) 2x6 sq. mm
56
-
-
b) 4x10 Sq. mm.
101
-
-
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- a) Ceiling Fan 1400 mm sweep, Category-A including carriage of materials within all leads and lifts.
56
-
-
Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required including carriage of materials within all leads and lifts.:-
2
-
-
Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads and lifts.. a) 2 Pair
20
-
-
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads and lifts.
30
-
-
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.:- a) Exhaust Fan, Heavy duty, 300 mm sweep
21
-
-
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.:- a) 35 Liter capacity water heater (Cat-A)
8
-
-
Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required including carriage of materials within all leads and lifts. a) Telephone socket outlet, piano type.
3
-
-
b) TV. Socket outlet, modular.
3
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size including carriage of materials within all leads and lifts.:- a) Armoured cable 6 sq. mm (twin core)
70
-
-
Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required including carriage of materials within all leads and lifts.:-
6
-
-
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads and lifts.:- a) Double door-4 way
14
-
-
b)Double door-12 way
4
-
-
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.. 63 Amps. Cat-A.
13
-
-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of materials within all leads and lifts.:- a)Single pole. Cat-A
70
-
-
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of materials within all leads and lifts.:- Triple pole. Cat-A.
3
-
-
Supplying and fixing 20 Amps, 415 volts, TPN industrial socket outlet, 4-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp TPN-MCB, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.
2
-
-
Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts..
1
-
-
Supplying and fixing sheet metal bus-bar chamber suitable for 300 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & crosssectional area (63mmx6mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx550mmx200mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of materials within all leads and lifts.:-
1
-
-
Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required including carriage of materials within all leads and lifts.. 315 /400Amp. -50 KA
1
-
-
Supplying and fixing following rating, four pole (Three phase & neutral) 415 volts, 2-way centre off changeover switch in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.. 40 Amps.
1
-
-
Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt ) complete as required including carriage of materials within all leads and lifts.
2
-
-
b)Extra for using salt and charcoal for G.I. or copper plate earth
electrode complete as required.
2
-
-
c)Providing and fixing 25mm x 5mm copper strip in 40 mm dia.
G.I. pipe from earth electrode etc. as required.
2
-
-
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 300 mm deep (nominal) including carriage of materials within all leads and lifts.
1
-
-
Providing and fixing following type of surface mounting Decorative ultra slim SQUARE profile LED lighting fixture with extruded polycarbonate, environmental friendly,
energy efficient ready to use pack.18 W LED 6000 K complete with all accessories, connections, testing and commissioning etc. as required. 18 W LED 6000 K HAVELLS CODE LHEXACP7UN1W018 including carriage of materials within all leads and lifts.
95
-
-
Providing and fixing Trim Cosmo Surface Square
Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution. shock proof slim decorative , complete with all accessories connections, testing and commissioning etc. as required. a) 12 W LED 6500 K HAVELLS CODE LHEAAKP7IL1W012 including carriage of materials within all leads and lifts.
88
-
-
Supplying and fixing of fancy wall bracket requiredDecorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Upto 1 N x 9 W LED Lamp HAVELLS LHFOFTE1TZ1W012 including carriage of materials within all leads and lifts.
13
-
-
Supplying and fixing of integral Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED Mounting Pole Dia - 60 mm (max) OD. Dimension: Width: 200 mm & Height: 227 mm complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Upto 1 N x 20 W LED Lamp - Moon 200 HAVELLS LHFOGAE1T11F015 including carriage of materials within all leads and lifts.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements