Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation - HPTDC Tender
Building Construction
Coronavirus COVID 19
Eprocure
Opening Date8 Jul 2019
Closing Date29 Jul 2019
Tender Amount₹ 3,42,75,239
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HPTDC_29959_1Bid Award Id
ViewTender No
Proj/Misc/2012Tender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://http://hptdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete including carriage of materials in all leads and lifts.
20.48
-
-
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% and Treatment of soil under floors using chemical emulsion With Chlorpyriphos /Lindane E.C. 20% with 1% concentration including all leads and lifts and as per directed by
Engineer.
203.3
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batterns and ballies, height of the propping and centreing below supporting floor to ceiling not eexceeding 4mtrs.and removal of the same for insitu-reinforced concrete & plain concrete including carriage of material upto all leads and lifts: Foundations, footings, bases of columns and mass concrete.
260.84
-
-
Flat Surfaces such as soffit of suspended floor , roofs landings and the like floor etc. up to 200 mm in thickness.
631.2
-
-
Vertical Surfaces such as walls (any thickness) parrtitions and the like including atached pilasters butteress plinth and string cources and the like.
254.87
-
-
Columns / pillars, posts and struts square, rectangular or polygonal in plan
586.66
-
-
Beams, cantilevers, gurders / lintels sides and soffits of beams beam hounchings cantilivers, bressumers and lintels not exceeding 1.00 m in depth in all height in floor.
808.08
-
-
Stair cases with sloping or stepped soffits excluding landing.
104.89
-
-
Edges of slabs and breaks in floors and walls
295.88
-
-
Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) and curing complete including all leads and lifts excluding cost of form work in: Foundation and plinth
94.68
-
-
Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights.. all heights including carriage of material upto leads and lifts: Foundation and plinth.
209.9
-
-
Suspended Floor roofs, landing and shelves and and their support balconies, beams girders, bressumers and cantilever up to all floor levels (SLAB)
88.13
-
-
Walls including attached buttersses, pilasters and their caps and bases and string courses etc. upto floor two level:
145.55
-
-
Providing and laying cement concrete 1:1:2 (1cement: 1 sand: 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights.. all heights including carriage of material upto leads and lifts: Columns, pillars, posts and struts in square,rectangular or polgonal in plan
106.81
-
-
Lintle beams girders, bressumers and cantilever up to all floor levels
79.76
-
-
Providing mild steel /tor steel reinforcement (TATA /SAIL MAKE) TMT Fe 500 make or equivelent ) for RCC work including bending, binding and placing in position complete including carriage of material in all leads and lifts and as per direciton of Engineer Incharge.
Tor Steel
96513.02
-
-
Brick work 2nd class using common burnt clay building bricks in superstructure above plinths level in cement mortar 1:6 (1cement:6sand) including carriage of materials in all leads, lifts and upto all heights.
166.77
-
-
Half brick masonry in common burnt clay building bricks 2nd class in super structure in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads, lifts and upto all heights.
113.96
-
-
Providing and laying of brick bat filling of nominal size in sunken portion in position to fill the portion including all kinds of leads, lifts and carriage etc. complete in all respects as per directions / entire satisfactions of the Engineer in Charge
3.71
-
-
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1 cement:6sand) including carriage of materials in all leads, lifts and upto all height in breast and retaining walls.
139.28
-
-
Stone filling behind retaining wall including carriage of material in all lead, lifts and height.
16
-
-
Stone soling properly hand packed filling interstices with kharanja stone and consolidating to the required gradient and camber and rolling of binding materials moorum or earth etc. including carriage of materials in all leads and lifts.
151.35
-
-
Providing Second Class Deodar wood frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
4.3
-
-
Providing second class deodar wood work in frames of false celling partitions etc. sawn and put-up in position including carriage of materials in all leads and lifts.
4.3
-
-
Providing and fixing Second Class Deodar wood 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
110.45
-
-
Supplying and fixing 5.5 m thick glass panes with putty and nails including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(SAINT GOBIAN/MODI GUARD MAKE)
87.57
-
-
Providing and fixing 2nd class Deodar wood 35MM wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows and clerestory enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts.
84.72
-
-
P/F toughened glass door and fixed glazing with SS patch fittings of approved make. Including Complete as per drawings.Fixed glass ( toughened) 12 mm thick as per direction of the Engineer in charge including carriage of material in all lead and lifts. (Saint Gobian / Modi Guard)
4.41
-
-
P/F toughened glass fixed glazing with SS patch fittings of approved make. Including Complete as per drawings.Fixed glass ( toughened) 12 mm thick as per direction of the Engineer in charge including carriage of material in all lead and lifts. (Saint Gobian / Modi Guard)
46.56
-
-
Providing and fixing first class kail wood wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid separately) 20 mm thick 2nd class Deodar wood including carriage of materials in all lead and lifts.
56.78
-
-
Providing and fixing 6mm thick Cement bonded Particle board. ceiling of approved quality with butt jointing and nails upto all heights(frame work cover fillets to be paid for separately) including carriage of materials within all leads and lifts.
21.6
-
-
Providing and fixing cup board by using 19 mm water proofing board of approved manufacture for shutters, vertical and horizontal partitions (teak board) etc. and fixing 6 mm thick water proof ply backing, painting/polishing, Ist class deodar wood beading, moulding, brass handles, cachers M.S. piano hinges & Godrej lock etc. complete as per Architectural/sketch drawings and as per the direction of the Engineer-in-Charge including carriage of materials in all leads and lifts (Greenply/Kitply).
25.91
-
-
Providing and fixing 40x3 mm flat iron hold fast 40 Cm. long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (1cement:3sand:6graded stone aggregate of 20 mm nominal size including carriage of materials in all lead, lift and height.
244
-
-
Providing and fixing bright finished brass 450mm long ornamental handle for main door of approved make and design with screws etc. complete including carriage of materials in all leads and lifts.
2
-
-
Providing and fixing bright finish hard drawn hook and eyes, 200 mm size (I.S.I. make) Heavy duty including carriage of materials in all leads and lifts
47
-
-
Providing and fixing 1st class deodar wood. plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts.
126
-
-
Providing and fixing 1st class deodar wood. plain square edged cover fillets (beading) 50mmx12mm section, with wood screws in ceiling and lining including mitring at junction including carriage of materials in all leads and lifts.
55.14
-
-
Providing and fixing 100mm bright finished Brass floor door stopper with rubber cushion screws etc. of approved quality complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
28
-
-
Providing and fixing 250x16 mm bright finished brass sliding door bolts of Pagagon/ Flora make or equivalent with nuts and screws etc. complete including carriage of materials in all leads and lifts
13
-
-
Providing and fixing bright finished brass 100mm mortice latch & lock with pair of handles & lever with necessary screws complete including carriage of materials in all leads and lifts.Godrej/ Everlite make or equivalent.
9
-
-
Providing and fixing bright finished brass 100mm. Mortice latch with one dead bolt and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) including carriage of materials in all leads and lifts. Godrej/ Everlite make or equivalent.
7
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors including carriage of materials in all leads and lifts. Everest / Universal make or equivalent.
2
-
-
Providing and fixing oxidized M.S. double acting spring hinges (conforming to IS 6315) with necessary screws.150mm including carriage of materials in all leads and lifts. Everest / Universal make or equivalent.
2
-
-
30mm thick fibreglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 : 2000,including carriage of material upto all leads and lifts and as per direction of Engineer incharge
25.2
-
-
Providing and fixing brass Handles transparent or dyed to required colour and shade Pagagon/ Flora make or equivalent with necessary screws etc complete comply with ISO standard including crriage of material upto all leads and lifts complete as per detailed dtawings / directions of Engineer in Charge. 125mm Long.
86
-
-
100 mm Dia
150
-
-
Providing fixing bright finished Brass tower bolts Pagagon/ Flora make or equivalent with screws etc. complete. including crriage of material upto all leads and lifts complete as per detailed dtawings / directions of Engineer in Charge.Doors Tower bolts 250X10MM
86
-
-
Window Tower bolts 200X10MM
108
-
-
Providing and fixing of Stainless Steel (Grade 304 with Brush Finish) Staircase Railing as per details drawing of Diamond / KICH make or equivalent Top mounted square baluster system with Horizontal Members (model Each DT31-1-163) with top brackets, middle member connector, mounting system, base fitted with cover cap, top railing pipe is od 50mmx50mm square and three nos of middle pipes of 38mm dia pipes and anchouring to grainate steps, chemical grouting of bolts and all fittings including all members and labour as directed by the engineer in charge. The top of the railing pipe is of 50mm dia including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
150.18
-
-
Providing and fixing gypsum board of 12.5mm thk in ceiling including GI Channel Main/ Cross/ L Patti, with suspended GI patti with necessary screws complete in all respect ISI mark of approved quality as per directions of Engineer incharge including carriage of material upto all leads and lifts
126
-
-
Providing and fixing anodised aluminium (Jindal/ Hindalco make or equivalent) work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling
C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material upto all leads and lifts For doors windows and ventilatiors and glazed partitions frames.
151.2
-
-
For shutters of doors and windows including providing and fixing hinges/ pivots and making provision for fixing of fittings/ pivots and making provision for fixing of fittings wherever required including the cost of gasket as required.
87.24
-
-
Providing and fixing glazing in aluminium ventilator with PVC / Neoprene gasket etc. complete as per the architrctural drawings including carriage of material upto all leads and lifts and as per directions of Engineer in Charge. Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ per Square metre.
7.56
-
-
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Basic rate of tile not less than 75/- Sqft.)
572.11
-
-
Providing and laying Coloured glazed (600x300mm) in required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.(Basic rate of tile not less than 70/- Sqft.)
460.04
-
-
Providing and laying Duro stone vetrified tiles (300x 300mm x8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Basic rate of tile not less than 55/- Sqft.)
76.52
-
-
Providing and laying granite stone ( light grey / Ruby Red ) in flooring 20mm (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. 18 t0 20 mm.thick (Basic rate of tile not less than 225/- Sqft.)
40.62
-
-
Providing and laying flammed granite stone 18 to 20mm (average) thickness in risers of steps,skirting, dado and pillars laid on 12mm (average)thick base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per drawing and design including carriage of material upto all leads and lifts and as per direction of Engineer incharge (Basic rate of tile not less than 225/- Sqft.)
69.9
-
-
Providing and laying granite stone in frame for door and windows 20mm (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per drawing and design including carriage of material upto all leads and lifts and as per direction of Engineer incharge (Basic rate of tile not less than 225/- Sqft.)
106.05
-
-
Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge. 80mm thick inter locking blocks NTC Make or Equivalent
59.8
-
-
Providing and fixing 0.60 mm thick prepainted steel sheet (Tata Make) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mocrons over 5 microns primer coating including fixing with self driven steel screws / prepainted iron J or L hooks or seam bolts with prepainted limpet and rubber washers complete with all accesoriees as required as per the detailed drawings including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (TATA/ CENTURY MAKE or equivalent).
331.18
-
-
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing withhot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (TATA/ CENTURY MAKE or equivalent).
85.26
-
-
Providing and fixing valleys 60 cm overall with 0.60mm thick prepainted steel sheets in roofing withhot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, or seam bolts /driled screw & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (TATA/ CENTURY MAKE or equivalent).
66.48
-
-
Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.0.80 mm thick including carriage of materials in all lead, lift and height.
85.28
-
-
Providing and fixing flashing 38 cm overall with 0.60 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter & prepainted G.I. limpet & bitumen washer completed with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials in all lead, lift and height (Tata/Century wells make).
28.29
-
-
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick (Rolled cold) in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all lead, lift and height.
72.49
-
-
Providing and fixing on wall faces PVC (D- plast for rain water pipes of working pressure not less than 4.5 Kg/ per Square metretr. including filling the joints with approved adhesive complete including carriage of materials in all lead, lift and height (D-Plast/ Supreme or equivalent)
48
-
-
Providing and fixing on wall faces PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials in all lead, lift and height.(D-Plast/ Supreme or equivalent) a) 100 mm dia plain bend
24
-
-
Providing and fixing PVC hold bat clamp (D-Plast/ Supreme or equivalent) including steel bolt to SCI pipes embedded in and including cement concrete block 100 mm x 100 mm x 100 mm of 1:2:4 (1cement: 2sand: 4 graded stone aggregate) including carriage of materials in all lead and lifts.a) 100 mm nominal dia
20
-
-
Providing and laying waterproofing treatment to vertical and horizontal surfaces of depressed portions of W.C. , Kitchen and the like consisting of : 1st Course of applying cement slurry @4.4kg / per Square metre mixed with water proofing compound conforming to Is : 2645 in recommended proportions including rounding off junctino of vertical and horizontal surfaces. II nd course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal
surfaces.
89.59
-
-
Steel work welded in built up sections, / hollow Section trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material upto all leads and lifts and as per direction of Engineer incharge. In trusses and trussed purling in buildings.(TATA/ JIndal Make or equivalent.)
39.45
-
-
In gratings framed guard bars, ladders, railling,brackets and similar works.
12.67
-
-
Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of materials in all lead lifts and heights. In trusses and trussed purlins in buildings. .(TATA/ JIndal Make or equivalent.)
10.87
-
-
Providing and fixing of Stainless Steel (Grade 304 with Brush Finish) Staircase Railing (Upto 1.00 Mtr. in height) as per details drawing of KICH / Diamond or equivalent make Top mounted square baluster system with Horizontal Members (model Each DT31-1-163) with top brackets, middle member connector, mounting system, base fitted with cover cap, top railing pipe is od 50mmx50mm square and three nos of middle pipes of 38mm dia pipes and anchouring to grainate steps, chemical grouting of bolts and all fittings including all members and labour as directed by the engineer in charge. The top of the railing pipe is of 50mm dia including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
123.02
-
-
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. Shutters having width 3.5 metres
and above including carriage of material upto all leads and lifts.
23.55
-
-
Providing and fixing top cover for rolling shutters Shutters having width 3.5 metres and above including carriage of material upto all leads and lifts.
7.85
-
-
Providing and fixing ball bearing for rolling shutters including carriage of material upto all leads and lifts.
2
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
3251.3
-
-
Applying priming coat of standard brand/quality over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand, papering and knotting including carriage of materials in all lead and lifts.: With Ready mixed pink primer (Nerolac/ Asian paint or equivalent.)
325.79
-
-
Painting two coats with standard brand/quality (excluding priming coat) on new wood and wood based surfaces, with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matters sand papering and stopping and carriage of materials upto all lead, lifts and height.a) Enamel paint other then white.With Ready mixed pink primer (Nerolac/ Asian paint or equivalent.)
325.79
-
-
Polishing two or more coats with melamine polish on new wood and wood based surface to give an even shade as per direction and sutisfcation of Engineer in Charge including preparing the base surface cleaning of all dirt dust and sand papering etc. complete including carriage of materials in all leads lifts and heights.
56.78
-
-
6mm thick Cement plaster to ceiling including sides and bottom of beams, soffits of stairs, ramps etc. with cement mortar 1:3 (1cement : 3 fine Sand) including curing and carriage, leads of all kinds of materials and scaffoldings etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
736.01
-
-
25mm th. Cement Plaster in single coat on brick bat coba as per detailed drawings / instructions of Architect / Engineer in charge at site for exterior plastering upto all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mmin girth and finished even and smooth in cement mortar 1:6 (1cement : 6 fine sand) including curing and carriage of materials to all leads, lifts and scaffoldings etc. complete in all respects.
917.79
-
-
20 mm th. Cement Plaster in single coat on brick bat coba as per detailed drawings / instructions of Architect / Engineer in charge at site for exterior plastering upto all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mmin girth and finished even and smooth in cement mortar 1:6 (1cement : 6 fine sand) including curing and carriage of materials to all leads, lifts and scaffoldings etc. complete in all respects.
917.79
-
-
15 mm cement plaster in single coat on fair /rough side of brick/concrete/stone walls for interior plastering upto floor two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) above floor two and above floor two levelincluding carriage of material upto all leads and lifts and as per direction of Engineer incharge.
1796.96
-
-
Providing and applying Lustre paint to walls of approved colour & shade of Asian Paints or equivalent, cleaning the surface and make it free from dust by scrapping, cleaning etc., including application of primer coat over the same; application of minimum two or more coats of lustre paint upto the desired finish of the EIC and protecting till the handing over of site including required scaffolding, cleaning, filling up cracks with approved crack filler etc. entire satisfaction of the EIC including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
1461.14
-
-
Wall Painting ( two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease, loose pieces of scale and sand papered smooth including applying of putty a required for making the surface including carriage of materials in all lead lifts and heights.
952.49
-
-
Extra over for every sub sequent coat of wall painting with plastic emulsion paint of approved brand and manufacture including carriage of materials in all lead lifts and heights.
952.49
-
-
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials in all leads and lifts.
58.02
-
-
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
917.79
-
-
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all lead and lifts
73
-
-
Providing under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material in all lead and lifts
73
-
-
Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1cement:6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1cement:5sand:10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1cement :2sand:3 graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials in all leads and lifts.
73
-
-
Providing and fixing vitreous wash down Cera Make cat no S1013115 or equivalent series of Hindware /Jaquar white colour studio set along with C.P. JET ,SEAT COVER, CISTERN and twin flushing valves etc. complete in all respect, water closet ( European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materialss upto all leads and lifts and as per direction of Engineer in charge.( snow white)
12
-
-
Providing and fixing wash basin with built in counter Cera Cat. No. S2030108,865x500mm or equivalent series of Hindware /Jaquar including carriage of materials up to all leads and lifts and as per direction of Engineer in charge.
14
-
-
Providing and fixing 15 mm nominal size Basin Mixer Cera Cat. No. F1014451 or equivalent series of Jaquar/ JAL make with 450mm braided connection pipe including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .
-
-
-
Providing and fixing steel sink of Cera Make cat no. B4621102or equivalent Nirali/ Diamond make of approved design size: a) 610mmx455mmx225mm including carriage of materials up to all leads and lifts and as per direction of Engineer incharge.(Darby lite 24" x 18")
2
-
-
Providing and fixing CP Sink Mixer Cera make Cat. No.F1014501 or or equivalent series of Jaquar/Jal with 150mm long swivel spout, connecting legs and wall flange including carriage of material up to all leads and lifts and as per direction of Engineer
incharge.
2
-
-
Providing and fixing C.P.Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin.(32 mm dia) including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
2
-
-
Providing and fixing wall mixer Cera make Cat. No.F1014401 or equivalent or equivalent series of Jal /Jaquar with bend pipe for over head shower including carriage of material in all all leads and lifts and as per direction of Engineer incharge.
4
-
-
Providing and fixing Urinal with senser size(mm) 320 X 300 X 525mm Cera make or equivalent Cat No. S4010102 including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
3
-
-
Providing and fixing Rubber plug sink(Heavy duty) as approved by the Engineer in Charge for wash basin.(32 mm dia) including carriage of material up to all leads and lifts.
-
-
-
Providing and fixing 100mm pipes P or S Trap (Heavy Duty) for water closet PVC D-plast/ Supreme/ Phinolex including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
Providing and fixing bottel trap with fully casted body (with integral partition ) 32mm with 190 and 125mm long connecting pipes and wall flang Cera make Cat. No.F8060101 150mm or equivalent or equivalent series of Jal /Jaquar including carriage of material upto all leads and lifts and as per the direction of Engineer -in-charge
-
-
-
Providing and fixing C.P.Brass Towell rail Rack Cera Cat No. F5003101 or or equivalent series of JAL /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass (600mmx20mm). including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
Providing and fixing CP brass liquid soap dispenser Cera make Catalog No. F5002111 or or equivalent series of JAL /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
Providing and fixing CP brass waste for wash basin or sink Cera make cat no F8050102 or equivalent series of JAL /Jaquar 32 mm dia with half thread 32mm including carriage of material upto all leads and lifts and as per direction of Engineer incharge
-
-
-
Providing and fixing 600 x 800 mmX5mm Art mirror of superior glass mounted on wodden plugs Cera make cat no B3510112 or equivalent series of JAL /Jaquar with C.P. brass screw including carriage of material upto all leads and lifts and as per direction of Engineer in charge
-
-
-
Providing and fixing 500 x 700 mmX5mm Readymade mirror of superior glass mounted on wodden plugs Cera make cat no B3510112 or equivalent series of JAL /Jaquar with C.P. brass screw including carriage of material upto all leads and lifts and as per direction
of Engineer incharge
5
-
-
Providing and fixing Corner Glass shelves ( medium) Cera make cat no F5005102 or equivalent series of JAL /Jaquar including carriage of material upto all leads and lifts and as per direction of
Engineer incharge
4
-
-
Providing and fixing CP brass soap dish Cera make cat no F5002106 or equivalent series of JAL /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of material to all leads and lifts and as per direction of Engineer
incharge.
-
-
-
Providing & Fixing in position best Indian make coat and hat robe hooks of approved make fixed into wall with c.p. brass screws and rawl plugs etc. complete including cutting and making good the walls etc.including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
a) C.P. Brass coat and hat robe hook Two way Cera Make
Cat No. F5002108 or equivalent series of JAL /Jaquar including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
Providing and fixing C.P. Paper Holder Cera make Cat No. F5007110 or equivalent series of Jaquar/ JAL make including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
-
-
-
Providing and fixing C.P. Grab bar Cera Make Catalog No. B2210105 or equivalent series of Jaquar/ JAL make 350mm long including carriage of material upto all leads and lifts.
1
-
-
Providing and fixing CP brass bib tap with capstan head 15mm dia (Cera make Cat No. F1014152) or equivalent series of Jaquar/ JAL make with wall flange and areator including carriage of material to all leads and lifts and as per direction of Engineer incharge. (
Long nose)
38
-
-
Providing and fixing CP brass bib tap with capstan head 15mm dia (Cera make Cat No. F1014151) or equivalent series of Jaquar/ JAL make with wall flange and areator including carriage of material to all leads and lifts and as per direction of Engineer incharge.
38
-
-
Providing and fixing P.V.C. waste pipe of approved make for wash basin and sink including carriage of material upto all leads and lifts and as per direction of Engineer incharge
-
-
-
Providind and fixing 15mm nominal size Pillar cock (Cera Make Cat. No. F1014101) or equivalent series of Jaquar/ JAL make with aerator including carriage of material upto all leads and lifts.
15
-
-
Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock Cera Make Cat No. F1014201 or equivalent series of Jaquar/ JAL make with flange including carriage of material to all leads and lifts and as per direction of Engineer incharge.
30
-
-
Providing and fixing C. P. Brass shower rose with 15mm or 20 mm inlet: Cera Make Cat No.F7020102 or equivalent series of Jaquar/ JAL make 85mm with single flow and shower arm including carriage of material up to all leads and lifts and as per direction of Engineer
incharge.
-
-
-
Providing & Fixing C.P. Towel Ring Cera Make Cat No.F5002105 or equivalent series of Jaquar/ JAL make including carriage of material upto all leads and lifts and as per direction of Engineer incharge
8
-
-
Providing and fixing 100mm dia C.P. Grating including
carriage of material up to all leads and lifts and as per direction of Engineer incharge.
22
-
-
Providing and fixing PVC connections pipe with brass unions
45cm length 15 mm nominal bore including carriage of material in all leads and lifts
60
-
-
Providing and fixing M.I. Union (ISI Mark) including carriage of
material up to all leads and lifts and as per direction of Engineer incharge. i) 15 mm dia
10
-
-
ii) 20 mm dia
10
-
-
iii) 25 mm dia
10
-
-
Providing and fixing brass full way valve (Leader/ Zolato Make or equivalent) with wheel including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (Leader/ Zolato Make or equivalent) a) 15mm size
4
-
-
b) 20mm nominal bore
10
-
-
c) 25mm nominal bore
5
-
-
Constructing manhole with RCC top slab in 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate ) 20mm nominal size foundation concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished with afloating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testingincluding carriage of material in all leads and lifts. a) Inside size 800x800x500mm deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm integral dimensions total weight of cover and frame to be not less than 38 kgs (weight of cover 23kg and weight of frame 15 kg with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand)including carriage of material in all leads and lifts.
5
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:6 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:6 (1 cement : 6 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
5
-
-
Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium Grade) tube fitting and clamps as per IS code including making good the wall ceiling and floor including
carriage of material in all leads and lifts. a) 15mm nominal size
200
-
-
b) 20mm nominal size
50
-
-
c) 25mm nominal size
25
-
-
Providing and fixing in tranches galvanized mild steel tubes (Medium Grade) as per IS Code tube fitting exacavation for tranches will be measured and paid saprately including carriage of material up to all leads and lifts and as per direction of Engineer incharge. Jindal/Tata make or equivalent. a) 25mm dia
25
-
-
b) 20mm dia
15
-
-
Providing and fixing 150 mm X 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete including carriage of material up to all leads and lifts and as per direction of Engineer incharge. 150mm dia
78
-
-
Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete a) 75 mm nominal size
125
-
-
b) 110mm nominal size
90
-
-
Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. complete. a) Plain bend i) 75mm dia
36
-
-
ii) 100mm dia
20
-
-
iii) 150mm
5
-
-
b) Door bend i) 75mm dia
15
-
-
ii) 100mm dia
12
-
-
iii) 150mm
5
-
-
c) Single equal junction i) 75 mm dia
-
-
-
ii) 100 mm dia
-
-
-
d) Pvc Collar i) 75 mm dia
40
-
-
ii) 100 mm dia
35
-
-
iii) 150mm
25
-
-
e)Pvc Cowl i) 75 mm
10
-
-
ii) 100 mm
5
-
-
iii) 150mm
2
-
-
i) 75 mm
25
-
-
ii) 100 mm dia
20
-
-
iii) 150mm
20
-
-
Providing and fixing PVC floor trap of self cleaning design D-Plast/ Supreme/ Finolex make with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors 75 mm niminal diameter ( 100mm) including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
22
-
-
Providing connection from 25 mm to 40 mm pipe including carriage of material up to all leads and lifts and as per direction of Engineer incharge.
1
-
-
Fixing water meter of approved quality and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).including carriage of material upto all leads and lifts and as per the direction of Engineer -in-charge
1
-
-
Supplying in PVC with frame for man holes for frame of internal dimension 460x610mm rectangulerPVC (light duty single sear pattern -I) of approved quality including carriage of material upto all leads and lifts and as per direction of Engineer incharge
-
-
-
PVC water storage tank with cover and locking arrangement. 2000 ltrs. including carriage of material upto all leads and lifts and as per direction of Engineer in charge
2
-
-
Providing E.I. work : Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Legrand/Havell,s/L & T make) Group A
43
-
-
a) Group A.
43
-
-
b) Group C.
158
-
-
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required..(Legrand/Havell,s/L & T make) Group C.
8
-
-
Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required. (Legrand/Havell,s/North-West make)
33
-
-
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. .(Legrand/Havell,s/L & T make) S.P. 5/ 6 Amps one way Modular switch.
27
-
-
5 pin, 5/ 6 Amps Modular socket outlet.
27
-
-
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required..(Legrand/Havell,s/L & T make)
32
-
-
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required..(Legrand/Havell,s/L & T make)
28
-
-
Supplying and drawing following size of PVC insulated ,heat resistant, flame retardent (HRFR) and low smoke singlecore (flexible) copper condustor cable in the existing surface / recessed, steel / PVC conduit as required.(Havell,s/KEI/Finolex/RR Cable) 1X1.5 SQMM
60
-
-
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Havell,s/KEI/Finolex/RR Cable) (a) 2x1.5 Sq. mm.
490
-
-
2x4.0 Sq. mm.
710
-
-
2x6.0 Sq. mm.
305
-
-
Supplying and fixing 25 mm. dia PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (D-Plast,Polyfit)
220
-
-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-.(Legrand/Havell,s/L & T make) Single pole. Cat-A.
64
-
-
Supplying and erection of40/50/63 amp.. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Legrand/Havell,s/L & T make) Double pole. Cat-A.
3
-
-
Supplying and fixing 40 Amps. Cat-A. rating, double pole (single phase & neutral) 240volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand/Havell,s/L & T make)
3
-
-
Supplying and fixing 63 Amps. Cat-A. rating, Four pole (three phase & neutral) 415volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand/Havell,s/L & Tmake)
4
-
-
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(Legrand/Havell,s/North-West make) (a)Double door-4 way
4
-
-
Double door-6 way
3
-
-
Supplying and fixing of following way, triple pole and neutral sheet steel MCB distribution board, 415volts, on surface / recess, with provision for 4-pole MCB/RCCB/RCBO as incomer and SP MCBs as outgoing,complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(Legrand/Havell,s/L & T make) Double door-4 way (8+12),horizontal type
4
-
-
Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length(upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc. as required:(Usha/C.G./Havells/Khaitan make) a) Ceiling Fan 1200 mm sweep, category-A
19
-
-
b) Ceiling Fan 1400 mm sweep, category-A
14
-
-
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha/C.G./Havells/Khaitan make) (a) Exhaust Fan, Light duty, 300 mm sweep
12
-
-
Exhaust Fan, Heavy duty, 300 mm sweep
6
-
-
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (Bajaj/Recold/Sparehot/Havell,s).35 Liter capacity water heater (Cat-A)
8
-
-
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(Legrand/Havell,s/L &T make) 2 modules (78mmx78mmx50mm)
12
-
-
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required (Legrand/Havell,s/L&T make) (a)Telephone socket
8
-
-
TV. Socket outlet, modular.
7
-
-
Extra for fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required:-
8
-
-
Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.(Havell,s/KEI/Finolex/RR Cable) 1 Pair
380
-
-
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.(Havell,s/KEI/Finolex/RR Cable)
330
-
-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- (legrand make)
5
-
-
Earthing with G.I earth pipe 4.5 mtr. And 40 mmdia., including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
2
-
-
Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
4
-
-
Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.
4
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.
2
-
-
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)
50
-
-
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)
50
-
-
Supplying and fixing 25mmx5mm coper strip on surface or in recess for earth connections etc.as required
50
-
-
Supplying and laying 8 SWG copper wire at 0.50 mtr. On surface or in recess for loop earthing along with existing surface/recess/submain wiring/cable as required as required.
50
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Havell,s/ Polycab/ KEI make as approved by site incharge) (a) Armoured cable 6sq. mm (2 core)
30
-
-
Armoured cable 16 sq. mm (4core)
105
-
-
Armoured cable 70 sq. mm (3.5 core)
30
-
-
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Havell,s/ Polycab/ KEI make as approved by site incharge) (a) Armoured cable 6sq. mm (2 core)
140
-
-
Armoured cable 70 sq. mm (3.5 core)
30
-
-
Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 2way single door MCB DB WITH 6 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- 4 Meter long having nominal bore dia. 65 mm planting depth 80 cm with pit depth 95 cm.
6
-
-
Supplying and fixing of LED post top BLPTSP 25W NW LED Bajaj make in spherical shape polycarbonate diff user with IP65 protection., complete with accessories including connections as required. LED post top BLPTSP 25W NW LED Bajaj make
6
-
-
Supply and erection of wall braket single arm copper suitable for 1X10watt LED lamp Philips make Cat No: 36282 wall lamp copper with all accessories including cost of 1No. 10Watt LED lamp and connection as required or its equivalent as approved by engineer in charge
23
-
-
Providing and fixing fan box (nominal size) complete in all respect as required:-
30
-
-
Main Panel 125 Amp. Design as per technical specification and drawings manufacture, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction and approval of the Engineer Incharge.Incoming 1 Nos. 125A,FP, 25 kA, MCCB with Microprocessor based release having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc.., Bus bar 1 set of 200 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.Outgoings 4No.63 A, FP, 10 kA, MCCB with thermal magnetic release and spreader terminals.1 no. MCB TPN 63 Amp. 2 no. MCB DP 40 Amp.Instruments 1 Nos. 0-500 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch. 1 Nos. 0-125 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch.1 Set R Y B phase indicating lamps with protection fuses.1 Lot of control wiring. 1 Set of designation plates.
1
-
-
Design as per technical specification and drawings manufacture, insure, pack, transport to site, store and erect in proper position , testing and commissioning of single/double door with IP-65 protection lvl. cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction and approval of the site engineer.Incoming 63 A 4P MCBTPN -1 no. Outgoing 100 A copper Bus Bar 3 nos. 40 Amp. MCBDP
1
-
-
Supply and fixing of Rubber insulation matt 2mtrx1mtrx12mm to prevent electric shock as reqd complete in all respects
1
-
-
Supplying and fixing of G.I. strip with sharp edges alongwith the exiting pole (as per design) for protection of light fixture including painting as per direction of Engineer incharge.
6
-
-
Providing and fixing of LED batten for surface and and pendent anodized extruded aluminium housing, high transmissitivit diffuser Bajaj make Cat no. BCLAB 40W (4FT) complete with all accessories including connections, testing and commissioning as required.
30
-
-
Providing and fixing following type of surface mounting decorative LINEA LED Bajaj make led 40 watt light fixture Cat no.-BICDP 40WLED complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Bajaj/Wipro make or as approved by site engineer)
3
-
-
Providing and fixing surface mounting decorative bulk head Bajaj make led 10 watt light fixture Cat no.-BIBWP10W LED IP 65 protection incluing 10 w led, complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Bajaj/Wipro make or as approved by site engineer)
4
-
-
Providing and fixing RECESS mounting decorative SKYLITE luminaire 1X1 Bajaj make led 18 watt light fixture Cat no.-BCTBLR18ZTWH 18W WH complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Bajaj/Wipro make or as approved by site engineer)
12
-
-
Providing and fixing of recess mounted 12 watt BAJAJ make LED downlight fixture cat no. BZSLO 12WWH PRO DOVEE SERIESincluding connections, testing and commissioning as required or its equivalent as approved by engineer in charge.
30
-
-
Providing and fixing of Surface mounted 8 watt BAJAJ make LED light fixture cat no. BGSLO 8WWWHSQ including connections, testing and commissioning as required or its equivalent as approved by engineer in charge.
54
-
-
Providing and fixing following type of surface mounting decorative Bajaj make led light fixture Cat no.-112492 15W/M led strip including driver complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Bajaj/Wipro make or as approved by site engineer)
50
-
-
Supply, installation, testing and commissioning of three star rating LG make kS-Q 24 ENXA 2.0 TR capacity single phase 220 v Split type Air Condioner inverter type with angle iron stand complete in all respect including connection etc. as per direction of Engineer-in-charge.
6
-
-
Supply and erection of Ceiling lamp brown brush suitable for 8X7 w LED lamp Philips make Cat No: 36998 brown brush with all accessories including cost of 8 Nos.7W LED lamps and connection as required or its equivalent as approved by engineer in charge
1
-
-
Supply and erection of Mirror light ULTRON 17W LED Philips make with all accessories including and connection as required or its equivalent as approved by engineer in charge
3
-
-
Providing and installation of Surveillence System (CCTV): Providing, fixing and testing IP Dome/Bullet Night Vision Indoor weather proof cameras (CP Plus/ Hikvision /Dahua/Uniview make), 4.0 mega pixel, IR distance 30 mtr. & optical WDR 120 DB HTTP/TCPIP/DHCP/UDP including three year comprehensive warranty & maintenance and as per specifications as required including carriage of material in all lead and lifts and as per direction of of Engineer-incharge.
10
-
-
Providing, fixing and testing IP Dome/Bullet Night Vision Indoor/outdoor weather proof Vari-Focal Camera, (CP Plus/ Hikvision /Dahua/Uniview make), 4.0 mega pixel, IR distance/distance 30 mtr. & optical WDR 120 DB HTTP/TCPIP/DHCP/UDP including three year comprehensive warranty & maintenance and as per specifications as required including carriage of material in all lead and lifts and as per direction of of Engineer-incharge.
1
-
-
Providing ,fixing and testing 16 Channel NVR (CP Plus/Hikvision / samsung techwin/MX India make) 2/4 SATA port,16 CH in/CH out,1080P/960P/720P, open gateway easy to cofigure the IP, power supply 12v/2A, including twoyear maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
1
-
-
Providing and fixing SMPS 12 V 20 Amp. including 2 year maintainance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts .
2
-
-
Providing and fixing BNC connector including 2 year maintance & as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts .
20
-
-
Providing and fixing power Connector including two year maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
10
-
-
Providing and fixinng TFT SCREEN 32" INCH full HD (81.28cm) (samsung /sony/ LG make )HD Resolution with AV/HDMI/VGA PORT including two year maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
1
-
-
Supplying and drawing LAN cable CAT 6, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required including carriage of material in all lead and lifts as per the direction of Engineer-in-charge. (polycab/D-link/finolex)
400
-
-
Providing Hard disk 4TB hard disk ( Seagate make or equivalent) including three year maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
2
-
-
Providing and fixing 8 port D-LINK Giga switch(d-link or equivalent) including three year maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
2
-
-
Providing and fixing 6 u rack with accesseries including two year maintance and as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
2
-
-
Providing and fixing following types of HDMI CABLE as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts. 3 meter
2
-
-
5 meter
2
-
-
Providing and fixing RJ 45 connector (D-link make) as per direction of Engineer-incharge and specifications as required including carriage of material in all lead and lifts.
15
-
-
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (D-Plast,Polyfit) 25 mm. dia
400
-
-
Providing and installation of 1 KVA offline UPS system with SMF batteries to provide one hour backup with three years warranty on UPS and batteries from the date of delivery complete with connections and testing as required complete in all respects including carriage of material in all leads & lifts.
1
-
-
Providing and installation of Fire Safety System: Supplying,Erection,Testing & Commissioning 1 loop wireless alarm control panel CEASE FIRE MAKE cat no. BC216-1/INT1 as per direction of Engineer-incharge and specifications requirement.
1
-
-
Supplying,Erection,Testing & Commissioning loop Interfacs card CEASE FIRE MAKE cat no. LIF128-1 as per direction of Engineer-incharge and specifications requirement.
1
-
-
Supplying,Erection,Testing & Commissioning serial Interfacs module CEASE FIRE MAKE cat no. SIM216-1 as per direction of Engineer-incharge and specifications requirement.
1
-
-
Supplying,Erection,Testing & Commissioning RF-TRANSLATOR CEASE FIRE MAKE cat no. FI700/RF/W2W as per direction of Engineer-incharge and specifications requirement.
2
-
-
Supplying,Erection,Testing & Commissioning WIRELESS SMOKE DETECTOR CEASE FIRE MAKE cat no. FI700/RF/O as per direction of Engineer-incharge and specifications requirement.
25
-
-
Supplying,Erection,Testing & Commissioning WIRELESS HEAT DETECTOR CEASE FIRE MAKE cat no. FI700/RF/T as per direction of Engineer-incharge and specifications requirement.
10
-
-
Supplying,Erection,Testing & Commissioning WIRELESS MULTI DETECTOR CEASE FIRE MAKE cat no. FI700/RF/OT as per direction of Engineer-incharge and specifications requirement.
1
-
-
Supplying,Erection,Testing & Commissioning WIRELESS MANUAL CALL POINT CEASE FIRE MAKE cat no. FI700/RF/MCP as per direction of Engineer-incharge and specifications requirement.
5
-
-
Supplying,Erection,Testing & Commissioning WIRELESS SOUNDER AND STROBE CEASE FIRE MAKE cat no. FI700/WM/SOUR/STRB as per direction of Engineer-incharge and specifications requirement.
2
-
-
Supplying,Erection,Testing & Commissioning WIRELESS EXPANDER CEASE FIRE MAKE cat no. FI700/RF/WE as per direction of Engineer-incharge and specifications requirement.
2
-
-
Supplying and fixing armoured cable 2x1.5 sqmm (Havell,s/Plaza/Finolex/RR Cable) including connection etc.complet in all respect as per direction of Engineer-incharge.
70
-
-
EXIT SIGNS Providing and fixing self glowing exit sign board size (350x200) single side painted made of luminescent safly,rigid sheet in standard colour,photo luminescent sheet made of crystals consisting mainly sulphidein protective glass like sheet green and yellow crystal luminescent should glass in dark.
10
-
-
Providing and fixing fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. ( Note All Fire Extinguishers ISI Marked/TAC approved ABC Type/water co2 Fire xtinguishers Capacity 6 Kg (IS : 15683)
6
-
-
Providing Solar Illumination: Supply Installation Testing and commissioning of smart integrated solar streetLight Bajaj make(sunsoko) 12w without hybrid switch 3 days backup,20wp panel capacity and 9AH built in mono crystline panel lithium ion Battery (LiFeP04) . The system constituents with integrated MPPT charge controller and PIR sensor with colour temp. 6000-6500k . The pole should be 4 Meter long having nominal bore dia. 65 mm planting depth 80 cm with pit depth 95 cm. Galvanized Iron (G.I.) pipe pole 'A' quality of and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L.complete in all respects . (Philips, Bajaj or equivelent as approved by Engineer -in-charge.
4
-
-
Supplying,installation,commissioning and testing of lift: Supplying,Erection,Testing & Commissioning lift of OTIS/Kone/Schindler make or equivalent machine room less (MRL) with Automatic Rescue Device as per below mentioned specifications with microprocessor based down collective control with VF,Gearless placed directly above the guiderails with speed of 1 meter per second, operating on 400/440 Volts, 3 phase,50 cycles, to ensure comfort ride Lift Car is to be designed with Stainless Steel with hairline finish with one enterance in front only, car ceiling with SS Hairline finish sleek Compact Fluorescent Circular/Square LED lights & one fan and GRANITE floor finish, Car enterance protection with power operated centre opening sliding door of SS ,landing frame with MS painted,Special feature to be accompained with lift & lift system:- (a) Digital position indicator in car & landing. (b) Battery operated emergency Light & Alarm bell.(c) Call register signal & VF door opener. (d)False Ceiling in car with down lighters (e) Infra red door system (f) Vandal Proof SS button with SS cover.(g) Automatic Rescue Device.(h) Fireman's Switch. (i) Intercom Provision with Switch (j) Floor Annunciator with Music Minor Building works,Scaffolding etc.(k) PCB Control Push Button.(8 (Eight)Persons Capcity (544 kg.),Lift well size 1850 mmx1650 mm ,Lift Car Inside size 1100mmx1300mmx2200mm ,Clear opening of door ,Travel (Ground, Ist, IInd and 3rd Floor) , running 7.4 to 12 meters Four Stops (,Ground,Ist &IInd IIIrd Floor,), levels, all openings on same side.Door opening W-800mmxH-2000mm.)Amp. meter selecter switch Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make
1
-
-
Design as per technical specification and drawings manufacture, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle RHOM ABB/Schenider/L&T make-1 No.pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction and approval of the Engineer Incharge. Incoming 1 Nos. 125A,FP, 50 kA, MPR with O/L & S/C protection . ABB/Schenider/L&T make Spreader link MCCB125A 4 Pole ABB/Schenider/L&T make RHOM ABB/Schenider/L&T make Digital metering set as per (detail below):Ampere Meter 96x96 mm Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make, Volt Meter Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T makeVolt meter selecter switch Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make,Current transformer Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make,Phase Indicating LED Lamps. Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make, Control S.P. MCB Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make, Terminal Strip Schneider/AE/ESSMA/KAPPA/C & S/Selzer/L&T make, Motorized Onload Changeover switch 125 Amp. 4 Pole L&T/C&S/Schneider make, Electricity interlocking between two source supply Changeover, Automatic & manually operation with accomodation on delay timer changeover 0.30 Seconds. KSB/C&S/Schneider make.Bus bar,1 set of 200 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.Outgoings 1No. 100A, FP, 25 kA, TMR with O/L & S/C protection MCCB with thermal magnetic release and spreader terminals.. ABB/Schenider/L&T make,2 no MCB DP 40 Amp.. ABB/Schenider/L&T makeSpreader link MCCB 100A 4 Pole-1 No.. ABB/Schenider/L&T make, 1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch., 1 Nos. 0-125 Amps, 96 sq.mm digital ammeter with 125/5A CT's and selector switch.1 Set R Y B phase indicating lamps with protection fuses.1 Lot of control wiring.1 Set of designation plates.
1
-
-
Supplying and fixing bulk head fitting ,Die-cast aluminium alloy body heat resistant prismatic glass cover, with specially designed gasket complete including CFL8/11Watt of Philips /bajaj make complete as required or as directed by site incharge.
6
-
-
Wiring for light point / fan point / exhaust fan / call bell pointwith 1.5 Sq. mm. PVC insulated flame retardant(FRLS) and low smoke single core (flexible) copper conductor cable of make in surface/recessed steel conduit and earthing the lightpoint with 1.5 Sq.mm. HRFRLS/PVC insulated single corecopper conductor cable as required. Group A.
10
-
-
Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.
40
-
-
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated flame retardant (FR) and low smoke single core (flexible) copper conductor cable in surface/recessed STEELconduit along with 1 No.1.5 Sq.mm. FRLS/PVC insulated single core copper conductor cable of make Havell's/Finolex/ Plaza/Cnn make for earthing as required.(Havells,anchor,plaza,RR,FINOLEX)
30
-
-
Wiring for power plug with 2x4 Sq. mm. PVC insulated flame retardant FRLS and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. FRLS/PVC insulated single core copper conductor cable for earthing as required.(Havells,anchor,plaza,RR,FINOLEX)
40
-
-
Supplying and drawing following size of PVC insulated, flame retardant (FR) and low smoke single core (flexible) copper conductor cable of Havells/Finolex/ Cnn make in existing surface / recessed, Steel/PVC conduit as required. (Havells, anchor,plaza,RR,FINOLEX) 3x1.5 Sq. mm.
40
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed,Armoured cable 35 sq. mm (3.5 core) working voltage 1100 volts grade as required :-(Havells or as per direction of site engineer) On surface
30
-
-
Providing and fixing shock proof slim decorative extruded fixture with domestic electronic ballast, suitable for 36 watt FTL, complete with all accessories (including tube rod 1x36 Watt), connections, testing and commissioning etc. as required. (Bajaj,Havells,Philips make) 1 x36 watt-FTL
4
-
-
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.
2
-
-
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, onsurface / recess, complete with tinned copper bus- bar, wires etc. neutral link, earth bar, din-bar, detachable gland plate,blanking plate, cable, identification labels interconnections and powder painted, including earthing etc. as required:-(Havells,legrand,North-west) Double door 12 way
1
-
-
Supplying and fixing 6 to 32 amps. rating 240 volts miniature circuit breaker single poles of Legrand (Lexic-10 KA) make in the existing MCBDB complete with connection, testing and commissioning etc. as required.(Havells,legrand,North-west)
7
-
-
Supplying and fixing following rating, Double pole, 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc of Legrand make. as required and directed by Engineer-in-Charge.(Havells,legrand,North-west)40 amps
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements