Himachal Pradesh Tourism Development Corporation Tender

Providing and fixing Sal wood work in frames of doors, windows, clerestory window and other frames wrought, framed and fixed in position including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing beams including hosting, fixing in position and applying a coat of wood reservative the unexposed surface etc and frame work complete with 2nd class deodar wood including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete including carriage of materials in all leads and lifts as per the diretion of Engineer in Charge.

Providing and laying Ceramic glazed wall tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Nitco/RAK/Kajaria or equivalent make (Basic rate not less than Rs. 55/- Sqft)

Providing and laying vitrified floor tiles size of tile 500x500 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Nitco/RAK/Kajaria or equivalent make

40 mm thick White sand stone fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.

Supplying and fixing of class 33 Pre-laminated wooden floor HDF 12mm thick Density min 850 kg/m3 of class décor laminate min of 0.4 mm of overlay of melamine based paper with abrasion resistance cycle _6000, impact Resistance IC in IC3 for 33th class, Scratch Residence EN4383.5: satin resistance Class -5 thickness swelling _ 18% height difference max _0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick, surface soundness 1.25 N/mm of Elegance/Green panel or equivelent as approved by the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 0.62mm thick prepainted sheet Tata duroshine or equivalent make fixed with galvanised iron J or L hooks bolts and nuts 8mm dia meter with bitumen and GI limput washers filled with white lead excluding the cost of perlines rafters and truses as per the Direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing ridges and hips 60 cm overall width 0.62 mm prepainted steel sheets in roofing with hot dipped matalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 micrones priming coating and back coat of polyster of 5 microns over 5 microns priming coating including fixing with prepainted iron J or L hooks, bolts nad nuts 6mm dia and prepainted GI limput and bitumen wahser complete with all accessories as required as per the direction of Engineer-In-Charge including carriage of materials wihin all leads lifts and heights. (Tata/Century wells or equivalent make).

Providing and fixing precoated sheet valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350 gm/m² as per the direction of Engineer-In-Charge including carriage of materials wihin all leads lifts and heights.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Polishing two coats with malamine polish of required shade (in matt finish) on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Applying priming coat with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Painting two or more coats on G.I. sheet with readymixed paint approved brand and manufacture on new work to give an even shade Readymixed paint red shade including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and laying integral cement based treatment for water proofing using rough Kota stone on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth ncluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer-In-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing, of joints complete as per direction of Engineer in Charge 75 mm nominal inner dia Pipes including carriage of materials within all leads, lifts and heights.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing, of joints complete as per direction of Engineer in Charge 100 mm nominal inner dia Pipes including carriage of materials within all leads, lifts and heights.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads, lifts and heights. i) 110 mm.

Providing and fixing snow white vitreous china wash down water closet (European type W.C. pan) with integral “P” or “S” trap with flushing cistern and seat cover complete set including jointing the trap with soil pipe in cement mortar 1:1 (1cement :1sand). Jaquar Make Cat No.SLS-WHT-6751P180PPZ or equivelent make of Jal/Hindware make including carriage of materials in all lead lifts and heights.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. nuts and bolts painted white including cutting hole and making good the same but excluding fittings including carriage of materials in all lead, lifts and heights. Jaquar Make CAT NO. SLS-WHT-6601 or equivelent make of Jal/Hindware make

Providing and fixing C.P. brass single hole wash basin mixer including carriage of materials in all leads, lifts and heights. Jaquar make CAT No.CQT-231678 or equivelent make of Jal/Hindware make

Providing and fixing wall mixer Jaquar make Cat No. CQT-23217UPR or equivalent or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing CP brass waste for wash basin or sink Jaquar make cat no ALD-705 or equivalent series of Jal/Hindware 32 mm dia with half thread 32mm including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing C.P. Paper Holder Jaquar make Cat No. AQN-7751 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing C.P. Grating 100 mm dia (heavy duty) of including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock Jaquar Make Cat No. CQT-23059 or equivalent series of Jal/Hindware make with flange including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing & Fixing C.P. Towel Rail Jaquar Make Cat No. AQN-7711 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing & Fixing C.P. Towel Rack Jaquar Make Cat No. AHS-1581 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing CP brass soap dish Jaquar make cat no ACN-1131N Soap dish or equivalent series of Jal/Hindware make with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing bottel trap (with integral partition ) 32mm with 190 and 125mm long connecting pipes and wall flang Jaquar make Cat. No. ALD-769L 250X190MM or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing oramentle looking mirror having size 1200X900 MM as per drawing and design of superior glass mounted on 6mm thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws & washers including carriage of materials in all leads lifts and heights.

Providing and fixing C.P overhead shower with arm Jaquar make Cat No. SH-BSH-1751 and SHA-5077 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing & Fixing C.P. Towel Ring Jaquar Make Cat No. AQN-7721 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing CP Health Faucet Jaquar make Cat No. ALD-563 or equivalent series of Jal/Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : with Sewer bricks conforming to IS : 4885 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.