Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Aug 2024
Closing Date9 Sep 2024
Tender Amount₹ 61,70,00,000
Costs
EMD
₹ 61,70,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Tourist Facilities At Baba Balaknath, Hamirpur District, Himachal Pradesh.sh Civil, Ws And Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.sitdp-hp_w01/2023-24
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPTDB_91611_1Bid Award Id
ViewTender No
SITDP-HP_W01/2023-24 RetenderTender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered) as per the direction of Engineer-in-Charge including carriage of material in all lead & lift.
-
-
-
Depth not exceeding 1.5 m
1133.93
-
-
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered) as per the direction of Engineer-in-Charge including carriage of material in all lead & lift.
-
-
-
Depth exceeding 1.5 m but not exceeding 3 m
1520.64
-
-
Treatment of soil under existing floors using chemical emulsion @ one litre per hole,300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration and as per the direction of Engineer-in-Charge including carriage of material in all lead & lift.
2135.9
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level as per the direction of Engineer-in-Charge including carriage of material in all lead & lift.
-
-
-
1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
1695.63
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of material in all lead & lift.
736.85
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge.“( Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of material in all lead & lift.
-
-
-
All works upto plinth level
4013.79
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-incharge.“( Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). :
-
-
-
All works above plinth level upto floor V level and including carriage of material in all lead & lift.
8607.14
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. - Thermomechanically treated bars of grade Fe-500D or more including carriage of material in all lead & lift.
348257.6
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. - Thermomechanically treated bars of grade Fe-500D or more including carriage of material in all lead & lift.
800513.6
-
-
60 mm thick cement concrete flooring with metallic concrete hardner topping, under layer of45 mm thick cement concrete 1:2:4 (1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic cement hardner consisting of mix 1:2 (1 cement hardner mix:2 stone aggrate 6 mm nominal size) by volume, with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 part of cement :1 part of metallic floor hardening compound of approved quality by weight) including finishing complete including carriage of material in all lead & lift and as per the direction of Engineer in Charge.
2067.34
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
31.64
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
21.82
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, alconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
4.75
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
3383.77
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
13721.72
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
10292.43
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
5820.6
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
6262.64
-
-
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
484.97
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
16444.3
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
3140.98
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto all lead & lift also also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
165.51
-
-
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
4231.77
-
-
Providing and fixing weepholes 100mm dia PVC pipe for (D-Plast/Polyplast or equivelent ISImark 2.5 kg pressure)for Retaining wall/ breast wall in CC/RR/SR Masonry, as per drawing and technical specification including carriage of material upto all leads and lifts as per direction of Engineer-in-charge.
1365
-
-
Second class brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1384.05
-
-
Second class half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand)
445.38
-
-
20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) including carriage of materials in all leads and lifts.
6524.17
-
-
15 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) including carriage of materials in all leads and lifts.
5878.64
-
-
6mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) including carriage of materials in all leads and lifts.
13574.79
-
-
Providing and applying two or more coat of plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
25962.64
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) make Asian/Nerolac or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
26490.64
-
-
25mm cement lime plaster in three coats, base coat 10mm and second coat 10mm thick with cement lime mortar 1:1:6(1 cement:1 Lime:6 Sand) and finishing coat 5mm thick with fat lime and sand mixed in equal proportions on the rough side of stone masonry walls for interior / exterior plastering upto floor two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
43.2
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
151.76
-
-
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :: White sand stone - Exposed face machine cut and table rubbed with rough backing. 30 mm thick including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
149.76
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
0.64
-
-
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
0.4
-
-
Engraving letters in hard stone as per approved drawing/design and specifications of Architect and Engineer in Charge complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
3000
-
-
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). With G.I. barbed wire of approved sample by Architect and Engineer in Charge including carriage of material in all lead and lift.
5600
-
-
Supplying at site Angle iron post & strut of required size of Tata/Sail/Jindal or equivalent including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
4750
-
-
Supplying and fixing turn buckles and straining bolts for barbed wire fencing including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1240
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
11
-
-
Providing and laying at or near ground level factory made kerb stone of NTC or equivalent in M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1145.88
-
-
Providing and fixing C.I ( Cast iron ) bench Super delux bench on approved of with wooden/brown/yellow colour. Stand/legs made up of decorative cast iron material for mounting, 15 inches in width and weiging approximately 85 kg complete including carriage of material upto all leads and lifts and as per direction of Engineer incharge.
30
-
-
Provding and fixing dustbin as per drawings and design including carriage of material upto all leads and lifts and as per direction of Engineer incharge. Dustbin-square twin
30
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete of Tata/Sail/Jindal or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2985.34
-
-
Structural steel work in single section, Supply and Erection of M.S. Insert Plates & Channels for support 10 to 20mm thick including drilling holes, nut bolts & rivets, fabrication etc. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
10963.75
-
-
Providing and fixing expansion hold fasteners on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
Fastener with threaded dia 6 mm
423.78
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes of TATA/SAIL or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
214048.57
-
-
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2678.43
-
-
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with preprinted iron J or L hooks, bolts & nuts 6mm dia & preprinted G.I. limpet and bitumen washers complete with all accessories as required of TATA/SAIL or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
938.86
-
-
Providing and fixing valley 60 cm overall 0.60mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic outing of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.
91.41
-
-
Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design.
1089.19
-
-
Providing & fixing factory made Fiberglass Reinforced plastics (F.R.P.) facia ,roofing, ornamental cornices of required colour &shade, shape ,size etc as per architecture drawing, design /pattern, specification. made by Resin Transfer Moulding (RTM) Machine Technology. Complete in all repect as per direction of charge of Engineer-in-Charge including carriage of material upto all lead & lift.
597.06
-
-
Providing and fixing C.I Bluster weight 3.25 kg in M.S. Railing as per drawings and design and specifications including carriage of material upto all leads and lifts and as per direction of Engineer Incharge.
3062
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. Asian/Nerolac or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
5201.21
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approved sample including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2164.3
-
-
Providing and fixing M.S hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1220
-
-
Providing and fixing polycarbonate transparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories as required TATA or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2912
-
-
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) and including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
Red sand stone - 30mm thick gang saw cut stone
1908.82
-
-
White sand stone - 30mm thick gang saw cut stone
290.54
-
-
Providing and fixing structural steel frame of SAIL/JINDAL make or equivalent (for dry cladding with 30 mm thick 'gang saw cut with machine cut edges sand stone) on walls upto all height using 'M.S. square/ rectangular tube in the required pattern as per architectural drawing, design and specification 'including cost of cutting, bending, welding etc. The frame work shall be fixed to'the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be 'welded to the frame and embedded in brick wall with cement concrete block 1:2:4 '(1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size '300x230x300 mm, including cost of necessary centring and shuttering and with 'approved expansion hold fasteners on CC/RCC surface, including drilling 'necessary holes. Approved cramps/ pins etc. shall be welded to the frame work 'to support stone cladding, the steel work will be given a priming coat of Zinc 'primer as approved by Engineer-in-charge and painted with two or more coats of 'epoxy paint (Shop drawings shall be submitted by the contractor to the Engineerin-'charge for approval before execution). The frame work shall be fixed in true 'horizontal & vertical lines/planes. (Only structural steel frame work shall be 'measured for the purpose of payment, stainless steel cramps shall be paid for 'separately and nothing extra shall be paid.upto all lead and lifts, all height including carriage of material by machanical and manual mean as per direction of Engineer in charge.
41667.56
-
-
Providing and fixing adjustable stainless steel clamps of Hilti make, required shape & size, adjustable with stainless steel nuts, bolts and washer ( total weight not less then 260gms. ) for dry stone cladding complete as per direction of Engineer Incharge including carriage of material by machanical and manual mean and loading/unloading etc.
2128.03
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
133.53
-
-
Providing double edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per approved sample including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
37.05
-
-
Stone work in plain ashlar in super structure upto floor five level in cementmortar 1:6 (1 cement : 6 coarse sand) including pointing with cementmortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : One face dressed Grey sand stone including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
315.49
-
-
Providing and laying NITCO/KAJARIA or equivalent vetrified Glazed Ceramic floor tiles of size 300x300x12 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
225.2
-
-
Providing and fixing NITCO/KAJARIA Make or equivalent Ist quality ceramic glazed wall tiles 300x600x12mm conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
456.72
-
-
Providing and laying NITCO/KAJARIA Make or equivalent Double charged digital vitrified floor tiles 600x600x12 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
461.44
-
-
Chequerred precast NTC or equivalent cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). : Light shade pigment using white cement including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
42.12
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern of NTC or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
13201.09
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
221.71
-
-
Providing and laying Makrana white marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2458.77
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. as per approved sample. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
5430.52
-
-
Providing and fixing Granite pavers /cobbles as per drawing and design and specifications 200X 100 X 100mm Pattern 1 including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.
437.17
-
-
Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Second class teak wood
3.33
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
162.28
-
-
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
2010.68
-
-
Providing and fixing plain multipurpose cement board of 8 mm thick as per IS: 14862 (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
73.68
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture of Asian/Nerolac or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
294.15
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & design sample including Single / double glass panes, wire mesh and silicon sealent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).
207.63
-
-
Providing and fixing glass panes 4 mm thick fixed with nails, screw, beading etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
113.03
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete with 2nd class teak wood beading 62x19 mm including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
35.99
-
-
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge: Extruded section profile size 48x40 mm including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
162.22
-
-
30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi- hambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
61.09
-
-
Providing and fixing bright finished stainless steel tower bolts with necessary screws etc. complete : Godrej Make or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
250 x 10 mm
109
-
-
150 x 10 mm
102
-
-
100 x 10 mm
40
-
-
Providing and fixing bright finished stainless steel door lock with necessary screws etc. complete : Make (Godrej Rim lock- Ultra Tribolt 1CK) or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
66
-
-
Providing and fixing stainless steel(SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
255x19 mm
100
-
-
Providing and fixing bright finished Stainless steel handles 150 mm with plate 175x32 mm with necessary screws etc. complete : Godrej Make or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
161
-
-
Providing and fixing tubular type universal hydraulic door closer (Godrej Door closer single speed C102 60 kg,8340), embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1200 mm) including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
8
-
-
Providing and fixing Stainless steel hanging type door stopper 125 mm with rubber cushion, necessary brass screws etc. to suit shutter thickness complete Make AKS Ajanta DS1001 or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
37
-
-
Water Supply & Sanitary Installation
Providing and fixing water closet squatting pan Viterous china orrisa type W.C. pan of 580mm Make- JAL Cat No.65510-13 (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
20
-
-
Providing and fixing white vitreous china water closet (European type W.C. pan) JAL make Cat No. 65225-13 or equivalent with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat, jet and lid. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
69
-
-
Providing and fixing white vitreous china flat back or wall mount front urinal basin of 600x375x350 mm sizes JAL make Cat No. 65611-13 or equivalent respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
42
-
-
Providing and fixing Sensor Urinal (exposed) ‘Hebbal’ Post Flush Make- JAL Cat No.78315 or equivalant 15 mm having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
42
-
-
Providing and fixing counter top Viterous china flat back wash basin 630x450 mm Make- JAL Cat No. 66110-13 or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
71
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
77
-
-
Providing and fixing C.P. brass angle stop cock JAL make Cat No. 9048 or equivalent for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
95
-
-
Providing and fixing C.P. brass Short body bib cock JAL make Cat No. 9032 or equivalent of approved quality conforming to IS standards. - 15 mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
38
-
-
Providing and fixing C.P. brass long nose bib cock JAL make Cat No. 9036 or equivalent of approved quality conforming to IS standards. - 15 mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
62
-
-
Providing and fixing JAL make Cat No. 444 or equivalent uplasticised PVC connection pipe with brass unions : Providing and - 20 mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
80
-
-
Providing and fixing mirror of superior glass JAL make Cat No. 46551 or equivalent of approved quality and of required shape and size : Rectangular shape 450x600 mm including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
69
-
-
Providing and fixing toilet paper holder Make- JAL Cat No. 26546 or equivalent including all leads and lifts : C.P. brass including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
68
-
-
Providing and fixing Stainless Steel kitchen sink JAL make Cat No. 99330 or equivalent, with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 925x450 mm, bowl depth 200mm. including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2
-
-
Providing and fixing sink mixture JAL make Cat No. 9034 or equivalent with having water inlet, including fixing to wall with suitable brackets all as per manufacturers specification including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
2
-
-
Providing and fixing Stainless steel Health faucet JAL Make Cat No. 9213 set with square gun 15 mm nominal bore, weighing not less than 40 gms including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
50
-
-
Providing and fixing stainless steel soap Dish Holder JAL make Cat No. 26541 or equivalent with s.s screw including carriage of material in all lead and lift as per the direction of Engineer-in-charge..
77
-
-
Providing and fixing of Liquid Soap Dispenser With Glass Tumbler JAL make Cat No. 37547 or equivalent brand with S.S. Screw including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
74
-
-
Providing and fixing stainless steel towel rail JAL make Cat No. 36520 or equivalent 600 mm long with arrangement of approved quality including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
80
-
-
Providing and fixing JAL make Cat No. 36524 or euivalent stainless steel towel ring with concealed fittings arrangement including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
14
-
-
Providing and fixing pillar tap JAL make Cat No. 77222 or equivalent with having water inlet, including fixing to wall with suitable brackets all as per manufacturers specification including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
71
-
-
Providing and fixing Bottle Trap Make- JAL Cat No. 1861S03 or equivalent 32 mm size of approved quality & make including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
71
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
43000
-
-
Providing and fixing grating JAL Make Cat No. 9336 or equivalent 100x100 mm nominal size including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
203
-
-
Internal Plumbing Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
180
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work Exposed on wall - 25 mm nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
650
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
886
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1121.22
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal outer dia Pipes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
1304.8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 25 mm nominal outer dia Pipes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
134
-
-
Providing and fixing PPR Unions 20mm including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
90
-
-
Providing and fixing PPR Unions 25mm including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
90
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work TATA/Jindal or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
50 mm dia nominal bore
440
-
-
65 mm dia nominal bore
700
-
-
80 mm dia nominal bore
3200
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) TATA/Jindal or equivalent including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
25 mm nominal bore
40
-
-
40 mm nominal bore
45
-
-
50 mm nominal bore
18
-
-
65 mm nominal bore
18
-
-
80 mm nominal bore
16
-
-
Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete. 75mm dia pipes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
543
-
-
Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive complete. 110mm dia pipes including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
647
-
-
Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. complete including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
PVC plain Bend 75 mm dia.
88
-
-
PVC plain Bend 110 mm dia.
88
-
-
Single equal branch of required degree with oval access door insertion rubber wash 3mm
-
-
-
75 mm dia.
77
-
-
110 mm dia.
77
-
-
PVC Collar 75 mm dia
96
-
-
PVC Collar 110 mm dia
96
-
-
PVC clamps 75 mm dia
188
-
-
PVC clamps 110 mm dia
188
-
-
PVC Cowls 75 mm dia
17
-
-
PVC Cowls 110 mm dia
17
-
-
PVC Door Bend 75 mm dia.
58
-
-
PVC Door Bend 110 mm dia.
58
-
-
PVC Tee 75 mm dia.
62
-
-
PVC Tee 110 mm dia.
62
-
-
Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
75 mm Pvc floor trap
67
-
-
110 mm Pvc floor trap
46
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
3204
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
-
-
-
Coupler 75 mm
158
-
-
Coupler 110 mm
158
-
-
Single tee with door, 75x75x75 mm
54
-
-
Single tee with door, 110x110x110 mm
62
-
-
Bend 87.5°, 75 mm
54
-
-
Bend 87.5°, 110 mm
70
-
-
Shoe (Plain) 75 mm Shoe
54
-
-
Shoe (Plain) 110 mm Shoe
62
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation including carriage of material in all lead and lift as per the direction of Engineer-in-charge.
10
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material upto approved dumping site of MC/PWD etc.as approved by Engineer Incharge
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
180.25
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material upto approved dumping site of MC/PWD as approved by Engineer Incharge
204.39
-
-
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
1285.79
-
-
Demolishing lime concrete manually/ by mechanical means and disposal of designated locations and disposal of dismantled materials upto approved dumping site of MC/PWD etc as approved by Engineer Incharge
-
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto approved dumping site of MC/PWD etc. as approved by Engineer Incharge . In lime mortar
269.39
-
-
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto approved dumping site of MC/PWD etc. as approved by Engineer Incharge. In cement mortar
293.3
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge of area 3 sq. metres and below
123
-
-
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge Of sectional area 40 square centimetres and above
1.54
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Dismantling steel work in single sections including dismembering and stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
400.46
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
1422.23
-
-
Dismantling tile work 10mm to 25mm thick in floors and roofs laid in cement mortar including stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
1319.72
-
-
Dismantling tile work above 25mm to 40 mm in floors and roofs laid in cement mortar including stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
288.89
-
-
Dismantling stone slab flooring laid in cement mortar including stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
4600
-
-
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
543.16
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground of MC/PWD/NAC as approved by Engineer Incharge
3114.6
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground of MC/NAC/PWD as approved by Engineer Incharge
501.78
-
-
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS- 12818 and making good the same etc. complete as per direction of Engineer in- charge.
24
-
-
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.
24
-
-
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. Internal Work- Exposed on wall
75
-
-
Dismantling jack arch roofing and floors including stacking the servicable materail and disposal of unservicable materail upto approved dumping site of MC/PWD as approved by Engineer Incharge
22.5
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish materail upto dumping ground of MC/NAC/PWD as approved by Engineer Incharge. All kinds of soil
500
-
-
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same including carriage of material in all lead & lift and as per the direction of Engineer in Charge. All kinds of soil
500
-
-
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. including carriage of material in all lead & lift and as per the direction of Engineer in Charge. All kinds of soil
700
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Pilkhan- Ficus infectoria
40
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Amla Tree- Phyllanthus emblica
70
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Jamun Tree- Eugenia jambolana
30
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Arjun Plant- Terminalia arjuna
60
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Curtain Creeper- Tarlmounia elliptica
20
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Peach plant- Prunas persica
40
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Khubani- Prunas armeniaca
40
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Wallnut- Juglan regia
40
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Anjeer- Ficus carica
40
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Plum- Prunus hortulan
30
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Molsari- Mimusopselengi
70
-
-
Providing plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge. Plant of Lagerstroemia- Lagerstroemia indica
60
-
-
Providing, Supplying, fixing and erection of M.I. Cabin Dimension (4x4x7) Feet as per approved drawing, design and direction of Engineer in Charge upto all lead and lift.
4
-
-
Electrical Works
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. (Polycab,havells make or as approved by site engineer)
-
-
-
a) Group A.
345
-
-
b) Group C.
1045
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF) single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
723
-
-
Wiring for twin control light point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LF PVC insulated copper conductor single core cable etc. as required (Polycab,havells make or as approved by site engineer)
-
-
-
Group C.
68
-
-
Supplying and fixing two module stepped type fan regulator on the existing modular plate switch box including connections etc. as required. (Legrand, Havells, make or as approved by site engineer
125
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer)
-
-
-
Single pole 5/ 6 Amps one way Modular switch.
25
-
-
5 pin, 5/ 6 Amps Modular socket outlet.
25
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer
310
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(Legrand, Havells, make or as approved by site engineer
171
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
20
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (Polycab,havells make or as approved by site engineer)
-
-
-
1 run of cable
3250
-
-
Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Polycab,havells make or as approved by site engineer)
-
-
-
1 x 1.5 sq. mm
2300
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells make or as approved by site engineer)
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
4870
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1300
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1050
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
45
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
500
-
-
4 X 10 sq. mm + 1 X 6 sq. mm earth wire
400
-
-
4 X 16 sq. mm + 1 X 6 sq. mm earth wire
100
-
-
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.(polycab, Diplast make or as approved by site engineer)
-
-
-
20 mm dia. ISI marked, PVC conduit
1700
-
-
25 mm dia. ISI marked, PVC conduit
2120
-
-
32 mm dia. ISI marked, PVC conduit
340
-
-
Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand,havells make or as approved by site engineer)
-
-
-
Single pole MCB 6 / 32 A
670
-
-
MCB Double pole 32Amp
10
-
-
MCB Triple pole and neutral 63 Amp
28
-
-
RCBO DP 25A / 240 V 30 mA sensitivity
36
-
-
RCBO DP 40A / 240 V 30 mA sensitivity
6
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer)
-
-
-
Double door-12 way
17
-
-
Double door-8 way
6
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer)
-
-
-
Double door-4 way (8+12),horizontal type
60
-
-
VTP&N-8 way (8+24),horizontal type
9
-
-
Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha,Bajaj,Havells make or as approved by site engineer)
-
-
-
a) Ceiling Fan 1200 mm sweep, category-A
33
-
-
b) Ceiling Fan 1400 mm sweep, category-A
134
-
-
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by site engineer)
-
-
-
Exhaust Fan, Light duty, 300 mm sweep
69
-
-
Exhaust Fan, Heavy duty, 380 mm sweep
4
-
-
Providing and installation of stationary storage type Electric water heater Andris Slim 30 ltrs Geyser Racold Make (Geyser) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.(Racold,crompton,Havells make or as approved by site engineer)
-
-
-
30 Liter capacity water heater (Cat-A)
6
-
-
Instant heating type 3 Ltr capacity Geyser
4
-
-
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(Legrand/Havell,s make)
-
-
-
8 modules (250mmx78mmx50mm)
15
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells make or as approved by site engineer)
-
-
-
Telephone socket outlet, Modular.
23
-
-
TV. Socket outlet, modular.
10
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer)
-
-
-
1 Pair
870
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells make or as approved by site engineer)
430
-
-
Providing computer points consisting of G.I modular type box , front and cover plates with snap fit type RJ45 socket complete with making connection using Cat 6 or equivalient type cable as directed by the Engineer -in -charge
23
-
-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required (legrad,Havells make or as approved by site engineer)
4
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
16
-
-
Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
-
-
-
G.I. earth plate 600 mm X 600 mm X 6 mm thick
6
-
-
Copper earth plate 600 mm X 600 mm X 3 mm thick
12
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
5
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
350
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
160
-
-
Providing and fixing G.I. tape 50 mm X 6 mm thick on surface of wall or in pipe complete as required.
120
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
60
-
-
Providing and fixing 6 SWG dia Copper wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required.
340
-
-
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required.
200
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/armourered/XLPE power cable, working voltage 1100 volts grade on surface /existing pipe etc. of the required size:- (Polycab,Havells or ISI make as approved by site incharge)
-
-
-
Armoured cable10sq. mm (2 core) armoureded
2000
-
-
Armoured cable6sq. mm (2 core) armoureded
1500
-
-
Armoured cable 10 sq. mm (4core) armoureded
200
-
-
Armoured cable 50sq. mm (3.5 core) armoureded
200
-
-
Armoured cable 95 sq. mm (3.5 core) armoureded
20
-
-
Armoured cable 150 sq. mm (3.5 core) armoureded
20
-
-
Armoured cable 240 sq. mm (3.5 core) armoureded
25
-
-
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab, Havells or ISI make as approved by site incharge)
-
-
-
Armoured cable 6sq. mm (2 core)
50
-
-
Armoured cable 10 sq. mm (4core)
50
-
-
Armoured cable 95 sq. mm (3.5 core)
80
-
-
Armoured cable 150 sq. mm (3.5 core)
180
-
-
Armoured cable 240 sq. mm (3.5 core)
125
-
-
supply,installation testing and commissioning of the following fittings as desired by the Engineer incharge at site
-
-
-
Providing and fixingSurface mounted 20 watt Wipro make LED Mirror light fixture cat no. LL20-111-XXX-65 NE3 20W or of equivalent K lite/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer
20
-
-
Providing and fixingSurface mounted 10 watt Wipro make LED Mirror light fixture cat no. LL20-111-XXX-65 NE3 10W or of equivalent K lite/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer
38
-
-
Providing and fixing Surface mounted 6watt K Lite make LED foot light fixture cat no. 2747 or of equivalent Wipro/Bajaj/Philips make complete with all accessories, connections, testing and commissioning etc. as required.
20
-
-
Providing and fixing Surface mounted 6 watt K Lite make LED Up downt light fixture wall cylin mini cat no. 3654 or of equivalent Wipro/Bajaj/Philips make
10
-
-
Providing and fixing Surface mounted 6 watt Bulk head LED light fixture 7W Wipro make cat no. LW 07 -141-XXX-57-G1 orBajaj/Philips/K lite make
65
-
-
Providing and fixing Surface/ Recess mounted 40 watt K Lite make LED light fixture cat no. 3354 or of equivalent Wipro/Bajaj/Philips makecomplete with all accessories, connections, testing and commissioning etc. as required and as approved by site engineer
20
-
-
Providing and fixing Surface/Recess mounted 12 watt K Lite make LED light fixture cat no. 3342 or of equivalent Wipro/Bajaj/Philips complete with all accessories, connections, testing and commissioning etc.and as required and as approved by site engineer .
1466
-
-
Providing and fixing of Surface /Recess mounted 7 watt K Lite make LED light fixture cat no. 3285 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
151
-
-
Providing and fixing of Surface mounted 180 watt K Lite make LED Flood light fixture for facade lighting cat no. 4202 or of equivalent Wipro/Bajaj/Philips make complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
2
-
-
Providing and fixing of Surface mounted 120 watt K Lite make LED Flood light fixture for facade lighting cat no. 4201 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning as required and as approved by site engineer
2
-
-
Providing and fixing of Surface mounted 50 watt K Lite make LED Flood light fixture for facade lighting cat no. 6805 or of equivalent Wipro/Bajaj/Philips complete with all accessories including connections, testing and commissioning as required and make or as approved by site engineer.
5
-
-
SITC of Surface mounted 30 watt K Lite make LED Flood light fixture for facade lighting cat no. 4286or of equivalent Wipro/Bajaj/Philips, including making connections, testing etc. as required or as approved by site incharge
3
-
-
Providing and fixing of Surface mounted 18 watt Mollis LDO6 light fixture Surface/Recess of Wipro make or equivalent Bajaj/Philips/panasinic complete with all accessories including connections, testing and commissioning as required and as approved by site engineer.
257
-
-
Providing and fixing of Surface mounted 10-12 watt K Lite make LED bollard light fixture for land scape cat no. 4799 or of equivalent Wipro/Bajaj/Philips
5
-
-
Supplying,installation,testing and commissioning of Astronomical time switch 2 output per phase and suitable for single, capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) withmanual override facility with 12/24 hour display format with suitable battery andindication for relay status i/c programming at site complete as required (Legrand,Havells make or as approved by site engineer)
1
-
-
Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts.
-
-
-
63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Legrand make Cat No. 027029 ,63 Amp FP, MCCB
1
-
-
100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB
2
-
-
200 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB
1
-
-
Supply and Erection testing and commissioning of K lite make 4.2 m long decorative pole as per catalogue No.K Lite make Cat No.KP 4337,Model and with decorative single arm bracket for supporting Decorative 1 No.30W each LED fixtures o or equivalent along of Bajaj / L.T / Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
10
-
-
Supply and Erection testing and commissioning of K lite make 6.0 m long decorative pole as per catalogue No.K Lite make Cat No.KP 4624,Model and with decorative single arm bracket for supporting Decorative 1 No.45W each LED fixtures o or equivalent along of Bajaj / L.T /Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
5
-
-
Supply and Erection testing and commissioning of K lite make catalogue No.K Lite make Cat No.4897. ,Model decorative 1 No.50W each LED fixtures or equivalent along of Valmont/Bajaj /LT/Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
5
-
-
Supply and Erection testing and commissioning of K lite make catalogue No.K Lite make Cat No.4337. ,Model decorative 1 No.30W each LED fixtures or equivalent along of Valmont/Bajaj / LT/Niri make with 2way single door MCB DB with 6 Amp. complete in all respects as required or as directed by site incharge.
10
-
-
Supply and erection of DWC HDPE Pipe 1m below ground level including excavation and back filling as may be required at site Dura line/TeleRex/Astral makes or equivalent as approved by engineer incharge.
-
-
-
160/136 mmdia
100
-
-
120/103 mm dia
100
-
-
63/51mm dia
100
-
-
Supply ,Installation , Testing and Commissioning of 40 / 80 Litre capacity stainless steel body water coolers complete in all respects of Voltas / Blue Star Make
10
-
-
Fire Alarm System
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and
facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
Ten Loop Panel.
1
-
-
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Heat Detector )
150
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Smoke Detector )
198
-
-
Supplying, installation, testing & commissioning of addressable fire control module complete as required
50
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
49
-
-
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
50
-
-
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
30
-
-
Supplying and fixing of Double sided LED signage with built in battery back-up for 2 hrs.and all other fixing accessories as required ( BAJAJ cat. No. 220211 BESL 03 LED DSD WBB Red ) or equivalent approved List of make.
10
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 X 1.5 sq. mm
1000
-
-
Supplying and laying of 1.1 KV Grade 2 X 1.5 sq.mm. copper cables on surface / conduit complete with clamps etc as reqd. (MAKE: GLOSTER/ KALINGA/ GRANDLAY/ HYGLOW ), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
4000
-
-
"Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed conduit as required."
-
-
-
25MM
5200
-
-
Surveillnace System (CCTV)
Providing and fixing COLORVU BULLET CCTV (Hickvision ModelDS-2CD1047G0-L or equivalent) IP 4 MP Color Vu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE, Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
92
-
-
Providing, fixing DOME NETWORK CCTV CAMERA ( Hikvison Model DS-2CD1343G0E-I or equivalent ) IP 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE; Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
101
-
-
SITC of 25X 100MTRS PTZ SPEED DOME CAMERA ( Hikvision Model DS-2DE4425IW-DE or equivalent) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25× optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, Two Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
2
-
-
SITC of 32 CHANNEL 4K H. 265+ NVR ( Hikvision Model DS-7732NI-K4 or equivalent), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160)resolution , incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port upto 6TB each, Two Years Warranty and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
9
-
-
SITC of Power Supply ISI MARK including 3 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
8
-
-
SITC of RJ-45connector including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
10
-
-
SITC of 16 PORT POE SWITCH 75 WATTS including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
12
-
-
SITC of DC Connector including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
5
-
-
Providing and fixing SAMSUNG Crystal 4K Pro 108 cm (43 inch) Ultra HD (4K) LED Smart TV with Voice Search (UA43AUE70AKLXL), (Black) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport . (Samsung /Sony make or its equivalent as approved by the Engineer incharge)
10
-
-
Providing and fixing Polycab make cctv 4+1 wiring for fixing of cameras in the existing PVC conduit as per requirement & three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
6000
-
-
Providing Hard disk (8TB hard disk Seagate make) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
9
-
-
Providing and fixing of Crotomak make 6 U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex,Lepose make or as approved by site engineer)
10
-
-
High Mast
Supply of 12.5 Meter long hot dip galvanized 12 Sided Polygonal Structure made up of High Tensile Steel Sheet confirming to BSEN 10025 S355 / ASTM 572 Grade 50 having Top diameter 150mm , bottom 360mm , Sheet Thickness 3mm/3mm suitable to use with wind Velocity 47 m/s as per IS 875 Part (iii) of 1987 with Base Plate 25mm thick. The Standard of Galvanization as per BS ISO 1461. The Mast included all accessories ( GI Lightening Arrestor , Galvanized Head Frame with Covered Canopy , Avaition light Bracket , Trailing Cable 5 core 2.5 Sq.mm Copper Conductor , Weather proof junction box , Plugs and Sockets , SS Wire Ropes 6mm AISI 316 Grade , Two Way Suspension system , Double Drum Winch , 3 Phase Electric Motor ( Power Tool for winch Operation) , Lantern Carriage for 6 LED luminaires , Winch & Motor mounting Bracket duly HDG including all the hardware to fix the accessories at site. The Mast Suitable to use with 6 number Symmetrical orientation 300W LED Floodlights. Make : Valmont/BAJAJ.
1
-
-
Supply of 300W LED Floodlight made up of Cast aluminium housing with heat resistant toughened glass cover having lumen efficiacy of 120 Lumens/watt including electronic driver and 10Kv surge protection device complete with all respect. Make : Wipro/Bajaj./philps
6
-
-
Supply of MS Control Panel with 32 Amp TPN MC incomer and Motor Control Circuit with Suitable Contactors ( Lowering Raising of Carriage) with Timer Facility complete with all respect.
1
-
-
Constructoin of suitable shallow foundation with 'M 25' grade concrete suitable size foundation bolts /anchor plates for the 16 mtr and 12.5 mtrs high mast considering the tested soil bearing capacity at site at 2 mt depth with all materials & labour. Complete foundation design & calculation on basis of the load bearing capacity of the soil.
1
-
-
Erection of the 12.5 mtr. high mast with the help of suitable eqipments and wiring of luminaires with all wiring material & labour.
1
-
-
Provision of GI pipe earthing for High Mast with 2.5M long 40mm dia. G.I. pipe including connection of High Mast earth terminal with 25x3mm GI flats with all materail & labour 2 NOS. PER MAST.
2
-
-
DG Set
Supply and commissioning of 62.5KVA silent type DG set Cat No. CS62.5D5P, Cummins engine make Cat No. 4BTAA3.3-G11, Engine BHP 84, 62.5 KVA Cummins® ‘S Series’ diesel generating sets, powered by Cummins ‘S Series’ engines, are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi-cylinder, conforming to BS 5514/ISO 3046. Alternator: Synchronous alternator of Stamford make suitable for continuous operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: › + 1.0 % Voltage regulation (max.) in static conditions › IP: 23 protection with insulation class H › Permissible overload of 10% for one hour in 12 hours of operation. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The control panel consists of following parts: Instrument cluster displaying water and lube oil temperature, lube oil pressure, engine RPM, running hours, battery charging current with LED Indications for battery charging failure, high water temperature and low lube oil pressure MCCB of suitable rating with overload and short circuit protection Combined meter for voltage, amps and frequency, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing termination, Indicating lamps for “Load On” and “Set Running” Instrument fuses duly wired and ferruled. DG set suitably housed in CPCB-II approved acoustics enclosure with cold start kit and standard accessories. i.e control panel, fuel tank, Battries with leads and AMF Panel.
1
-
-
Supply and commissioning of 125KVA silent type DG set Cat No. CS125D5P, Cummins engine make Cat No. 6BTAA5.9-G13, Engine BHP 159,125 KVA Cummins® ‘S Series’ diesel generating sets, powered by Cummins ‘S Series’ engines, are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi-cylinder, conforming to BS 5514/ISO 3046. Alternator: Synchronous alternator of Stamford make suitable for continuous operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: › + 1.0 % Voltage regulation (max.) in static conditions › IP: 23 protection with insulation class H › Permissible overload of 10% for one hour in 12 hours of operation. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof and long lasting finish. The control panel consists of following parts: Instrument cluster displaying water and lube oil temperature, lube oil pressure, engine RPM, running hours, battery charging current with LED Indications for battery charging failure, high water temperature and low lube oil pressure MCCB of suitable rating with overload and short circuit protection Combined meter for voltage, amps and frequency, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing termination, Indicating lamps for “Load On” and “Set Running” Instrument fuses duly wired and ferruled. DG set suitably housed in CPCB-II approved acoustics enclosure with standard accessories.i.e control panel, fuel tank, Battries with leads and AMF Panel.
1
-
-
Supply and fixing of PVC insulated matt 2mtrx1mtrx3mm to prevent electric shock as reqd complete in all respects
8
-
-
Supply, installation, testing and commissioning of following MS exhaust pipe medium duty class-B complete with all accessories such as bends flanges,gasket, flexible connections at a suitable distance and supporting arrangement as required at site.
25
-
-
Main Panel
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. The panel shall be floor Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge(2 No incomers 400A, 4P MCCB , One for transformer and second for D.G Sets with 4P auto transfer switch 400 A complete with all protections and indicating lamps etc.) Outgoing 10 x 125A , TP MCCB 25 KA with TMD release O/L and S/C protection , complete with rotary handles, spreader links & indication lamps etc. as per details. and 63 A FP MCB 10 KA 4 nos. , 40 A MCB DP 10 KA 6 nos. complet in all respects.
1
-
-
Main Panel for Temple And Langar Building
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge
1
-
-
Incoming
-
-
-
1 No. 400A, FP, 36 kA, MCCB Micro processor release having adjustable over load, SC and EF complet Rotary handel, spreader link, etc.
-
-
-
1 No. 250A, FP, 25 kA, MCCB TMD release having adjustable over load, SC complet Rotary handel, spreader link, etc.
-
-
-
1 No. 400A, Auto tranfer switch
-
-
-
Bus bar
-
-
-
3 set of 400 Amps, 415 volts, 3 phase, 4 wire colour coded Aluminium TPN bus bar, after taking all derating factors.
-
-
-
Outgoings
-
-
-
4 x 125A , TP MCCB 25 KA with TMD release O/L and S/C protection , complete with rotary handles, spreader links & indication lamps etc
-
-
-
6 x 63 A MCB FP 10 KA 3 x 40 A MCB FP 10 KA 3 x 40 A MCB DP 10 KA
-
-
-
Instruments
-
-
-
1 Nos. 0-500 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch. 1 Nos. 0-400 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch. 1 Set R Y B phase indicating lamps with protection fuses. 1 Lot of control wiring. 1 Set of designation plates.
-
-
-
Sub Panel Langar Buildings
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge
1
-
-
Incoming
-
-
-
1 No. 125A, TP, 25kA, MCCB TMD release having adjustable over load, SC complet Rotary handel, spreader link, etc.
-
-
-
Bus bar
-
-
-
3 set of 150 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors
-
-
-
Outgoings
-
-
-
8 x 63 A MCB FP 10 KA 3 x 40 A MCB FP 10 KA
-
-
-
Instruments
-
-
-
1 Nos. 0-500 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch. 1 Nos. 0-400 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch. 1 Set R Y B phase indicating lamps with protection fuses. 1 Lot of control wiring. 1 Set of designation plates.
-
-
-
STREET LIGHT PANEL
1
-
-
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. The Panel manufacturer should have valid certficate and proof of having the panels tested for 50KA fault level from CPRI Bhopal and shall be as approved by the Engineer Incharge
-
-
-
Incoming
-
-
-
1 Nos. 63A, FP,10 kA, MCB
-
-
-
Bus bar
-
-
-
1 set of 63 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.
-
-
-
Outgoings
-
-
-
12 No. 6-32 A, SP, 10 kA, MCB
-
-
-
Instruments
-
-
-
1 Set R Y B phase indicating lamps with protection fuses. 1 Lot of control wiring. 1 Set of designation plates.
-
-
-
EV Charging Station
Supplying, installing,testing and commissioning of Electic Vehicle Charging Station Kazam make Model Kazam 3.3, Product Dimensions 27 x 19 x 13.5 cm; 2.02 Kilograms, Item part number KZ001, Manufacturer Part Number KZ001, Material ABS PLASTIC, Colour White, Special Features Convenient to install, All weather and waterproof, Real time data analytics, IOT enabled charging, Wattage 3.3 KW, IP67 certified, Ip (max) 20 Amp, Vp(max) 280 Volts, Input voltage 1 Phase 230 V AC, Connectivity SIM Based, MCB & Fuse YES, Wire 3 wires ( live, neutral and earthing/ 2.5 sq mm), Output connector type 3 Pin socket, Output current 16A max, Output current 3.3KW, theft proof, B/W EVSE & CMS MQTT/TCP, All weather functionality YES Dust & water proof), Number of Outputs 1, Ambient Temperature -30C to 55C, Cooling: Natural. (Kazam or equivalent or as approved by the engineer incharge)
40
-
-
ELEVATORS
Supplying, installing, testing and commissioning of 10 passenger, 680kg lift 5 Stop , Total Travel - 12 M 1.5 M/S ECE Model NO ELITA MRL R22 10 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 1915 mm W x 1865 mm D, CAR DIMENSIONS (W x D x H - mm) :1200 mm W x 1400 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Central opening (CO) doors DOOR OPENING (W x H - mm) :800 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Rope Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.(For Langar building)
1
-
-
Supplying, installing, testing and commissioning of 26 passenger, 1768 kg lift 4 Stop , Total Travel - 13.5 M 1.5 M/S ECE Model NO ELITA MRL R22 26 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2500 mm W x 3000 mm D, CAR DIMENSIONS (W x D x H - mm) :1500 mm W x 2500 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Telescpic opening (ATO 2P) doors DOOR OPENING on front and back as well (W x H - mm) :1200 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.(for temple complex)
1
-
-
Supplying, installing, testing and commissioning of 20 passenger, 1360 kg lift 3Stop , Total Travel - 10.5 M 1.5 M /S ECE Model NO ELITA MRL R22 20 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2200 mm W x 3050 mm D, CAR DIMENSIONS (W x D x H - mm) :1250 mm W x 2500 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : centre opening DOOR OPENING (W x H - mm) :1000 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Rope Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.(temple complex)
2
-
-
Supplying, installing, testing and commissioning of 20 passenger, 1360 kg lift 3 Stop , Total Travel - 6 M 1.5 M /S ECE Model NO ELITA MRL R22 20 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2200 mm W x 3050 mm D, CAR DIMENSIONS (W x D x H - mm) :1250 mm W x 2500 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Telescpic opening (ATO 2P) doors both side opening DOOR OPENING (W x H - mm) :1000 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Rope Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.(for adm builing)
1
-
-
Supplying, installing, testing and commissioning of 13 passenger, 884 kg lift 8 Stop , Total Travel - 25.2 M 1.5 M /S ECE Model NO ELITA MRL R22 13 PASS Gearless or of OTIS/Schindler/JOHNSON makes of following spcefications. HOISTWAY DIMENSIONS (W x D – mm): 2400 mm W x 1800 mm D, CAR DIMENSIONS (W x D x H - mm) :1450 mm W x1450 mm D x 2300 mm H, CAR & HOISTWAY DOOR TYPE : Centre opening (ACO 2P) doors DOOR OPENING (W x H - mm) :900 mm W x 2100 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in SS Honeycomb finish, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service , Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Rope Inspection Drive, Auto Fan Cut Off and Voice Synthesizer.(for parking)
3
-
-
Providing, laying and fixing of one No Copper conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc including cost of carriage and cost of material required size:-(Havells/ Finolex or equivalent make as approved). 6Sqmm 4core copper
200
-
-
SITC of front facing car Yamaha Make(or Equivalent) Drive System, AC Motor, Seating Capacity 6 Persons, Overall Length 4050 mm, Overall Width 1200 mm, Overall Height (With Sun top) 1810 mm 4Ply / 1839 mm High Wheel, Overall Height (Without Sun top) 1195 mm 4Ply / 1214 mm High Wheel Wheel Base 3340 mm, Front Wheel Tread 870 mm, Rear Wheel Tread 980 mm , Minimum Ground Clearance 105 mm 4Ply / 150 mm, High Wheel Frame Robotic welded automotive ladder-style steel frame protected with a multistep full immersion phosphate treatment, electro-deposition epoxy-based coating and an electrostatic applied polyester. Body Thermoplastic olefin, 2-part top coat of automotive-grade polyurethane Front Suspension Fully independent automotive-style strut suspension Rear Suspension Swing arm with coil springs Brakes Self adjusting rear drum Dry Weight (With Batteries) 611 kg (T-875 8 VOLT X 6 PCS) Batteries Trojan T 875 8 VOLT X 6 PCS Single Point Watering System Trojan Battery Watering System for easy maintenance USB Port Standard Voltage Rating 48 Volt Output Rating 4.4 HP (3.3 kw) Make: Mahle Charger Stationery Constant Current Charger | Make: DELTA-Q Maximum forward speed (Adj) 24 km/h Turning Radius 5.7 meter Parking Brake Pedal Brake Tire Size 18.00x8.50-8.00 4 ply / 19.50x6.50-12.00 High Wheels Steering Rack and Pinion Windshield Fold-Down Clear Windshield, Warranty 1 Year as required or as approved by site incharge
4
-
-
SITC of Outdoor advertising bill board minimum of size 6ft x 6ft with P4 Led with Master control box, including wiring and connections complete in all respect, for bridge or pole or streets having stainless steel cover with high bright LED light cover with milling effect and Computer for operation of HP make Core i3 (8 GB DDR4/1 TB/256 GB SSD/Windows 11 Home/21.5 Inch Screen/22-dd2456) including carriage of material in all lead and lifts through mechanical and manual transport . (HP/Lenovo/Asus make for computer or its equivalent as approved by the Engineer incharge)
5
-
-
FIRE FIGHTING
Supply, installation, testing and commissioning of fire authority approved fire fighting pumps, electrically driven generally as specified and shown in equipment schedule complete with:
-
-
-
Hydrant and Sprinkler Main Fire Pump
Supply, installation, testing and commissioning of fire authority approved horizontal end suction, single outlet pumping set with bronze impeller, C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plate with RCC base and with all pump accessories, including pressure switch, pressure gauge (both with cut off ball valves) complete as per specifications. Motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (specifications as per fire fighting requirements and on the pattern local authority approval) as per instruction and specifications.
-
-
-
Capacity : 2280 lpm
-
-
-
App.head :70 m
-
-
-
App.H.P. : 40 HP - 50 HP
-
-
-
RPM : 2900
2
-
-
Main Fire Pump for Curtain
Supply, installation, testing and commissioning of fire authority approved horizontal end suction, single outlet pumping set with bronze impeller, C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plate with RCC base and with all pump accessories, including pressure switch, pressure gauge (both with cut off ball valves) complete as per specifications. Motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (specifications as per fire fighting requirements and on the pattern local authority approval) as per instruction and specifications.
-
-
-
Capacity : 2280 lpm
-
-
-
App.head :50 m
-
-
-
App.H.P. : 40 HP - 50 HP
-
-
-
RPM : 2900
1
-
-
Main Diesel Pump - Common for Hydrant and Sprinkler System
Supply, installation, testing and commissioning of fire authority approved horizental end suction, single outlet pumping set with C.I. body and bronze impeller connected by means of a flexible coupling heat exchanger cooled diesel engine mounted on a common structural base plate with RCC base, anti-vibration pads and foundation including pressure switch, pressure gauge (both with cut off ball valves) complete with electric panel for automatic starting, battery including spare battery, automatic starting arrangement, exhaust pipe of required length to discharge outside building with muffler, oil tank mounted on suitable structural supports complete in all respects as per specifications ready for use and as per latest requirement of fire authority / regularities.
-
-
-
Capacity : 2280 lpm
-
-
-
App.head : 70 m
-
-
-
App.H.P. : 40 HP - 50 HP
-
-
-
RPM : 1800
1
-
-
Fire Jockey Pumps Supplying, installation, testing & commissioning of horizental end suction pump, comprising of 1 No. Electrical Driven inline of capacity 3.0 LPS to a head to 120 meter with all accessories, Pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings complete in all repsects.
-
-
-
Capacity : 3 LPS
-
-
-
App.head : 70 m
-
-
-
App. H.P. : 10 HP
-
-
-
RPM : 2900
2
-
-
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
-
-
-
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
-
-
-
Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
900 lpm at 35 m Head
1
-
-
MCC for Fire Fighting Pumps at Terrace
-
-
-
INCOMING:
-
-
-
a) One 100 amp. TP +NL M.C.C.B. with rotary handle of breaking capacity 25 KA
-
-
-
b) One-Volt Meter (0-500 V) with selector switch
-
-
-
c) One Set indicating lamps
-
-
-
BUS BARS OUTGOING
-
-
-
a) 100 Amp TPN BUS BAR (Aluminium).
-
-
-
b) One - 63 Amp.TP +NL M.C.C.B. with rotary handle of breaking capacity 35KA
-
-
-
c) One Fully Automatic D.O.L Starter suitable for Jockey Pump Motor 15 KW with over load relay, timer push buttons and Auto/Manual selector switch
-
-
-
d) One panel type Amp. meters one for each motor with ASS. CTS etc.
-
-
-
e) One sets of On/Off - neon indicating lamp.
-
-
-
i) All interconnecting power & control wires/cables suitable size within the panel and from panel to motors , pressure switches, level switches, cable Tray, pipes etc. including brass glands termination within fire pump house and earthing as per specifications.
1
-
-
Supply and installation of pressure gauge panel as per the requirement & comprising:
Pressure gauges & Pressure switches with ball valve and 2 x 1.5 sq mm copper conductor wiring to motor starter panel
Water piping from system upto the gauge panel along with valves etc.
Sheet metal enclosure with glass paneling etc. as approved
16
-
-
Providing & fixing 150 mm dia. Test line for Fire Pumps with flow meter of capacity 97.2 M3 /hr. complete with pressure gauge.
1
-
-
Supply, fabrication (as per code), installation, testing and commissioning of Pressure vessels 450mm diameter and 1000mm high fabricated from 8-10mm M.S. plate with accessories inside painting with epoxy paint and outside with enamel.
1
-
-
Providing & fixing 150mm diameter M.S. Class 'C' diesel pump exhaust pipe includings all fittings, like bends, tees etc. clamps / structural steel supports. The pipe shall be provided with 75mm thick fiberglass insulation & covering the insulation with 500g polythene sheet giving proper overlaps & sealing the joints with suitable adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet cladding.
35
-
-
Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :-
-
-
-
150 mm dia
12
-
-
100 mm dia
8
-
-
80 mm dia
6
-
-
CUBICAL FIRE PANEL BOARD
i) For 2 x 35 KW Wet Riser & Sprinkler Pump & Water curtain pump
ii) For 2 x 7.5 KW Jockey Pumps Design, supply, installation, testing and commissioning of non draw out cubical type sectionalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V complete with 4 strip, 250 A capacity Aluminium Bus - Bar Electrolytic grade, cable alley & supplying & fixing of following switchgears as per specifications including connections & interconnections.
-
-
-
INCOMER
1 nos. 250 A TPN MCCB with overload, short ckt., earth fault protection release, with 144 mm (0 -630 A) ammeter with 3 CT and selector switch, 144 mm (0 - 500 V) Voltmeter with selector switch, phase indication light with protection fuse, on / off / trip indicating light with protection fuse alongwith 1 no. bus coupler 630 A TPN. - 01 Set
-
-
-
OUTGOINGS
i) For 1 x 36 KW Wet Riser & sprinkler pumps.
200 A TP MCCB with star delta starter, overload relay start / stop push buttons, 96 mm (0-400 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer. - 01 Set
ii) For 1 x 7.5 KW Jockey Pumps 40 A TP MCB, 25 A star delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with protection fuse, single phase preventer. - 02 Set
iii) 200 A TP MCCB with 110 A star delta starter, overload relay start / stop push buttons, 96 mm (0-400 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer (Spare). - 01 Set
iv) 32A MCB for battery charging alongwith engine start relay 24V DC with AMF Panel - 01 set
v) 63A change over switch (0-100A) ammeter with 63A MCB and 63A DOL starter - 01 set
vi) Provision for starting the diesel engine fire pump with battery charger for trickle & boost charging. The diesel engine driven fire pump shall start automatically in the event of pressure dorop beyong preset limit on mains faulure or failure of electrical driven pumps to start.
-
-
-
Note:- CABEL CONNECTION
Separate neutral link to be provided wherever TP MCCB are used.
Following provisions to be made in the fire panel:
Audio visual alarm & indications having disconnect / reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset P Bs. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop.
Facility for mode selection ie auto or manual test & local/remote.
Protection failure & control cabling.
Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working chiller A/c panel is disconnected.
Remote indication of ON/OFF/TRIP shall be provided through potential free contact.
Provuision of remote starting/stopping (manuals) of the engine shall be made.
-
-
-
NOTE : All pumps operation shall be controled by flow switches.
The logic of control panel based on specification attached.
All pumps shall be works automatically or manually.
5 Amp power required for diesel engine pump from main fire fighting panel.
1
-
-
POWER & CONTROL CABLING
Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required.
Power Cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays).
-
-
-
3.5 C x 120 Sq. mm
100
-
-
3.5C x 35 Sq. mm
65
-
-
4C x 10 Sq. mm
70
-
-
Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays).
-
-
-
5C x 1.5 Sq. mm
70
-
-
5C x 2.5 Sq. mm
30
-
-
Earthing Strip / Wires.
-
-
-
Providing and fixing 25 x 5mm copper strip in 40mm light duty GI pipe.
55
-
-
Providing and fixing 25 x 5mm copper strip on surface or in recess for connections etc. as required.
45
-
-
Providing and fixing 4.0 mm dia. Copper wire on surface or in recess for loop earthing as required.
35
-
-
Supply & laying of rubber mat of size 1000 mm & 12 mm thick.
8
-
-
Supply and installation of ladder type 16G ms cadmium plated 'U' shaped channel 40mm x 20mm cable tray of following sizes:
-
-
-
150 mm wide
80
-
-
300 mm wide
65
-
-
FIRE FIGHTING SYSTEM (NOTE : Contractor shall obtain, from the local fire authority, completion certificate with respect to his work as required for occupation of the building without any extra cost).
Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved
Internal hydrants / landing valves generally as specified and all complete with:
-
-
-
63mm dia SS single outlet landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be as per IS code.
16
-
-
First aid hose reel with 25 mm dia, 30 m long rubber hose, ball valve, piping, nozzle and pressure guage as per IS code.
16
-
-
63mm reinforced rubber hoses (RRL) with male and female SS coupling, IS marked- 15 m. as per IS code.
44
-
-
Providing and fixing standard short size stainless steel branch pipe with gunmetal nozzle 16 mm dia outlet with standard instantaneous type 63 mm dia coupling.(IS:903)
22
-
-
Fire Axe
22
-
-
Aluminium Powder coated 900x1800 door for recessed fire hose cabinet. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering).
16
-
-
Providing & fixing SS fire External hydrant single landing valve with 80 mm NB flanged inlet ( Table-E Flange) , 1 no.SS spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards. Including flanged tapping from wet rise complete as required.
Single headed Stainless steel
6
-
-
Providing and fixing of Weather proof hose cabinets fabricated from 16 g M.S. Sheet with full glass door and mortise locking arrangement , suitable to accommodate one Hydrant landing valve, 2 nos. 15 M long hose and 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 m x 0.25 m).
6
-
-
Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 4 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 100 mm diameter sluice valve, 1 No. 100mm dia. Non-return valve and wall mounted box of M.S. construction with glass door to house the above mentioned components. as per IS code. MOC-S.G.I
1
-
-
Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 2 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 100 mm diameter sluice valve, 1 No. 100mm dia. Non-return valve and wall mounted box of M.S. construction with glass door to house the above mentioned components. as per IS code. MOC-S.G.I
1
-
-
Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction pipe MS class 'C' 100 mm dia. & 100 mm dia. foot valve & steel chain including. wall mounted box M.S. construction with glass door to house the above mentioned componenets. as per IS code.
1
-
-
Supply, fabrication & laying heavy grade IS marked black mild steel piping complete with all fittings, pipe supports, clamps etc. as approved with welded jointing for external hydrant system. Thes pipes shall be provided with 2mm thick weather proof treatment like covering with pypkote complete.
-
-
-
150 nominal bore
270
-
-
Excavation upto hard murram as per general profiles and back filling.
270
-
-
Making 1:2:4 cement concrete supports and thrust blocks generally as per required and approved.
2
-
-
Supply and installation of Butterfly Valves with mating flanges generally as specified all complete. (PN-16)
-
-
-
200 nominal bore
1
-
-
150 nominal bore
16
-
-
100 nominal bore
22
-
-
80 nominal bore
32
-
-
65 nominal bore
4
-
-
Providing and laying cast iron non-return valve IS marked with flanges genertally as specified complete (PN-16).
-
-
-
150 nominal bore
10
-
-
100 nominal bore
4
-
-
80 nominal bore
1
-
-
Providing and fixing of Air cushion tank (air-vessel) 250 mm dia. x 1.0 M high with dished top made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia brass Air Valve (Ball valve, pressure guage type), 25 mm dia. Stop with brass stop cock, nipple, tees, elbow and all accessories as required including fixing brackets.
4
-
-
Supply, installation testing and commissioning double flanged MS Y strainers with M.S. body and SS 40-grade mesh strainer.
Size 150mm
1
-
-
Supply, installation testing and commissioning double flanged MS pot strainers with M.S. body and SS 40-grade mesh strainer.
Size 200mm
2
-
-
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.
-
-
-
300 mm nominal bore
10
-
-
250 mm nominal bore
15
-
-
200 mm nominal bore
10
-
-
150 mm nominal bore
190
-
-
100 mm nominal bore
185
-
-
80 mm nominal bore
40
-
-
65 mm nominal bore
25
-
-
Supply, fabrication & laying heavy grade IS marked M.S. piping complete with all heavy quality forged fittings, pipe supports, clamps, painting etc. as approved with screwed jointing for wet riser system.
25 mm nominal bore
20
-
-
Supply, installation, testing and commissioning brass orifice plates in pipelines to reduce pressure from 8 kg. to 3.5 kg/sq.cm.
22
-
-
Constructing masonry chamber 90 x 80 x 90cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
With F.P.S. bricks
2
-
-
Supply, installation, testing and commissioning 200 dia. Brass foot valve as per IS code.
1
-
-
Providing and fixing 100 mm dia Pressure Gauges on Sprinkler Headers including Ball Valves
22
-
-
Preparation of working drawing, getting approval from statutory / local fire authority at all stage of work including inspection of authorities, obtaining licences from authorities including incidental changes etc. complete in all respect.
1
-
-
SPRINKLER SYSTEM
Supply, installation, testing and commissioning of 150 mm dia Installation Control Valve inclusive of 1 nos 150 mm dia butterfly valve, strainer, alarm valve with water motor gong, pressure gauges, test lines with ball valves with necessary MS piping with welded fittings of required sizes complete.
2
-
-
Supply, installation, testing and commissioning of 100 mm dia zonal control valve inclusive of 1 nos 100 mm dia butterfly valve, flow switch, water pressure gauges & 25 mm dia. auxillary drain valve with sight glass with necessary MS piping with welded fittings of required sizes complete.
Butterfly Valve - 100mm dia. (PN-16),Drain valve-25mm, Flow Switch & Sight Glass.
16
-
-
Providing and fixing 100 mm dia Pressure Gauges on Sprinkler Headers including Ball Valves
1
-
-
Providing, fixing, testing and commissioning of 15 mm dia. gunmetal quartz bulb quick response type sprinkler head to operate at 68 degree centigrade. (UL/FM Approved)
-
-
-
Quick response Upright type in basement parking areas and above false ceiling level
180
-
-
Quick response Pendent type with twin rossett plate
1150
-
-
Side wall type Quick response normal coverage
250
-
-
Supply, fabrication & laying heavy grade IS marked black steel piping complete with all fittings, pipe supports, clamps, painting etc. as approved with welded jointing for Sprinkler System.
-
-
-
150 mm nominal bore
430
-
-
100 mm nominal bore
420
-
-
80 mm nominal bore
265
-
-
65 mm nominal bore
580
-
-
Supply, fabrication & laying heavy grade IS marked M.S. piping complete with all heavy quality forged fittings, pipe supports, clamps, painting etc. as approved with screwed jointing for Sprinkler System.
-
-
-
50 mm nominal bore
360
-
-
40 mm nominal bore
420
-
-
32 mm nominal bore
700
-
-
25 mm nominal bore
2850
-
-
Providing and fixing 25 mm dia UL listed flexible stainless steel (SS 304) pipe for making final connection of sprinkler head with sprinkler system piping network including 2 nos. 25mm diameter G.I. connector, G.I. Nipple, Reducer, elbow and threaded jointing complete as per detail. Make : Easyflex (Kanwal) / TYCO / NEWAGE / PRADISE).
-
-
-
1000mm
120
-
-
1200mm
65
-
-
1500mm
55
-
-
Supply, installation, testing and commissioning of 16 Zone Sprinkler Flow Switch Annunciation Panel generally conforming to the intents of specifications complete as approved with:
a) FACP with all in-built Zone Cards and displays.
b) Battery and battery charger
c) Terminal strips for receiving and terminating all external cabling.
d) All internal wiring
e) Auto dialling facility to nearest fire brigade station.
1
-
-
Supply, laying and earthing of bare conduit installation complete with all conduit accessories, junction boxes, fish wire etc. of 25 mm dia M.S.
85
-
-
Supply and pulling of PVC sheathed, standard FRLS wires complete with termination at various panels, devices etc. in the above laid conduits - 2 x 2.5 sq.mm in Copper conductor for alarm circuits.
2 x 2.5 for alarm signal
60
-
-
Control wiring from Fire Pump Panel / Local Panel to remote Push Button in Control Room with 6C, 2.5 sq mm Cu. Wire laid 1.0m below ground
25
-
-
Supply & installation of remote ON/OFF push button stations for fire pumps in fire control room.
1
-
-
Providing and fixing electricaly operated flow indicating switches System Sensor in sprinkler branch line on each floor with necessary junction box installed in accessible place. (Wiring from switches to panel not included).
100 mm dia
16
-
-
Providing and fixing 15 mm dia forged brass window nozzle type sprinkler head (K-23, with an angle of 180 Degree) with a flow rate of 40 LPM at pressure of 3.0 Kg/cm2 .
35
-
-
Providing and fixing of Deluge valve with automatic alarm system suitable for 150 mm dia pipe including with all necessary accessories to be connected with control valve drain and test valve as per manufacturer's design.
3
-
-
Providing and fixing installation valve with turbine type automatic alarm to be connected with control valve drain and test valve as per manufacturer's design.
100 mm dia.
3
-
-
Providing and fixing 25 mm dia inspecting & testing assembly with built in bye pass arrangement and connection to drain line. (Giocomini).
16
-
-
PORTABLE FIRE EXTINGUISHERS & EXIT SIGNAGES
Supply, storing, handling, shifting, installation, testing and commissioning of portable fire Extinguishers as described below:
-
-
-
9 Kg. CO2 Fire Extinguisher with trolley (IS:2878)
2
-
-
4.5 kg carbon dioxide extinguisher, IS marked, with high pressure discharge tube, horn, control valve, CCE approved cylinder (IS:15683) - Wheel Type
26
-
-
6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers (IS:15683)
26
-
-
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube,high pressure discharge hose,discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint. Capacity 22.5 kg.
1
-
-
Supplying and fixing 9 Kg. Sand bucked alongwith bracket grouted in walls with necessary Hardware. The Bracket will be stove enamel painted inside with white colour and Red colour outside. Also FIRE, letters to painted in white enamel paint on outside surface.
18
-
-
Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containingLumigen II as base chemical, covered under UV stablized coating and of appropriate size (Auto Glo-lite or eq. Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
11520
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements