Himachal Pradesh Tourism Development Corporation Tender

Providing & supplying single seater bar stool without arms of size 500x500x1050mm (LxWxH) seating height 750 mm with a back rest made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved) with interconnected frame support for straingth and foot rest. The chair seat and backrest should be padded with polyurethane foam fully upholstered fabric/leatherite of de-decor, dicitex retails or equivalent or as approved make with cost of fabric/leatherite Rs. 750/- per meter or approved by HPTDC. The thickness of foam should be 4" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the chair including carriage of material within all leads and lifts.

Providing & supplying single seater chair with arms of size 650x735x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The chair seat and backrest should be padded with polyurethane foam fully capitone upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 4" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the chair including carriage of material within all leads and lifts.

Providing & supplying single seater sofa of size 850x750x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The sofa should have coil springs in seats and sinuous spring for backrest, padded with polyurethane foam fully upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter or approved By HPTDC. The thickness of foam should be 4" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette) to provided extra softness & comfort to the sofa. The necessary thickness of foam should be used for cushioning of front/side aprons of sofa. All open area or base or invisible part of the sofa should be fully covered with base fabric including carriage of material within all leads and lifts.

Providing & supplying 900X900x750mm pre-laminated teak ply (Greenply or equivalent) square Table top with 1.8 mm thick PVC edge binding tape with knots free teak wood legs finished in PU polish (Asian or equivalent) as per approved colour/shade including carriage of materials within all leads and lifts all complete. The laminate to be approved by the HPTDC and the wood polish to match the laminate

Providing & supplying of 1500X900x750mm pre-laminated teak ply (Greenply or equivalent) Rectangle Table top with 1.85 mm thick PVC edge binding tape with knots free teak wood legs finished in PU polish (Asian or equivalent) as per approved colour/shade including carriage of materials within all leads and lifts all complete. The laminate to be approved by the HPTDC and the wood polish to match the laminate

Providing & supplying 25mm thick pre-laminated teak ply board (Greenply or equivalent) Round shaped table top of size 900 dia with 750mm height with edge binding with 1.8 mm thick PVC edge binding tape. The base frame to be made of 25mm thick teak wood as per shape shown in snaps finished with PU polish (Asian or equivalent) suitable for top size 900mm. Wood Knots to be minimal as possible including carriage of materials within all leads and lifts. The laminate to be approved by the HPTDC and the wood polish to match the laminate

Providing & supplying 25mm thick pre-laminated teak ply board (Greenply or equivalent) Square shaped table top of size 900x900x750 mm with edge binding with 1.8 mm thick PVC edge binding tape. The base frame to be made of 25mm thick teak wood as per shape shown in snaps finished with PU polish (Asian or equivalent) suitable for top size 900x900x750 mm. Wood Knots to be minimal as possible including carriage of materials within all leads and lifts. The laminate to be approved by the HPTDC and the wood polish to match the laminate

Providing & supplying Laminated Rectangular work table 1200 x 600 mm(LXW) workstation in size as specified and top made 25mm thick Pre-laminated MDF board.In the workstation, all the edges are sealed with 1.8mm thick PVC edge binding tape all around, Side anels/Gable Ends made of 25 mm thick Pre-laminated MDF board. All the edges are sealed with 1.8mm thick PVC Edge binding tape on the user side and 0.8 mm on the Top and Bottom Side. The side panels/gable ends have 2 glide screws/lavellers each for leveling of the desk. 300mm height Modesty Panel made from 18mm Thick Prelaminated MDF board. The pedestal unit with 2+1 drawers to be provided with table made of pre-laminated MDF board as per approved colour/shade with centrally lockable. The entire desk unit is assembled with standard fittings and hardwares complete. Each side panel is provided with a cutout for laying cables for the monitor and other computer. Each table has a toughened glass white board marker fixed on SS clips as shown including carriage of materials within all leads and lifts.)

Providing & supplying L-shaped workstation made of 25mm thick pre-laminated MDF board (Greenply or equivalent) Rectangular front work table top of size 1500x700x750mm and side table of size 900x450x700mm. In the workstation, all the edges are binded with 2mm thick PVC edge binding tape all around, Side Panels/Gable ends made from 25mm thick pre-laminated MDF board. The side panels to have 2 glide screws/levellers each for leveling of the desk. 450mm height Modesty Panel Made from 18 mm Thick Prelaminated MDF board. The side unit to have openable shutters with adjustable shelf inside. The pedestal unit with 2+1 drawers to be provided with table made of prelaminated MDF board as per approved colour/shade with centrally lockable. The entire desk unit is assembled with standard fittings and hardwares complete. Each side panel is provided with a cutout for laying cables for the monitor and other computer including carriage of materials within all leads and lifts.

Providing & supplying an Ergonomic Medium Back Chair ( 2 no’s ) is designed for comfort, to provide lumbar support, they have 360 Degree swivel base mechanism, fixed PU arm, PU base with wheel and gaslit seat height adjustment including carriage of materials within all leads and lifts of a standard approved brand .

Providing & supplying an Ergonomic Medium Back Chair Ordinary chairs for office

Providing and supplying Bed with wooden headboard 75 mm thick high density U foam 48” high in 18 mm ply the edge of the patti of the Headboard to be finished in polish and finished with 0.4” thick foam pedding apholstred with fabric of approved colour and make 77" x 72 " x 12" ( LX B XH ) double bed with overall size 81”Wx73”LX40”H and with mattress Size W75”x L72”x8” thick. The box all four sides and top made of 18mm comm. ply/board finished with 3.5mm thick veneer (Greenply/Archid or equivalent) on three sides of approved colour/shade with teak wood beading on the edges finished with walnut mellamine polish (Asian or equivalent). The height of box will be 10”. The box does not have an openable lid but has side drawers with 1.0 mm laminate (Greenlam/Merino or equivalent) with telescopic runner (Hettich/Ozone or equivalent). The head board is finished in 3.5mm thick veneer in walnut polish of Melamine.

Providing and supplyng Bed with wooden headboard 77" x36 " x 12" ( LX B XH ) finished with 0.4” thick foam pedding apholstred with fabric of approved colour double bed with overall size 36”Wx85”LX40”H”. The box all four sides and top made of 18mm comm. ply/board finished with 3.5mm thick veneer (Greenply/Archid or equivalent) on three sides of approved colour/shade with teak wood beading on the edges finished with walnut mellamine polish (Asian or equivalent). The height of box will be 10”. The box does not have an openable lid but has side drawers with 1.0 mm laminate (Greenlam/Merino or equivalent) with telescopic runner (Hettich/Ozone or equivalent). The head board is finished in 3.5mm thick veneer in walnut polish of Melamine.

Providing and supplying Bed side table 1'-8" x 1'-4" x 18" (L X B x h) 2 nos. each side made of 18mm ply/board finished with 3.5mm veneer (Greenply/Archid or equivalent) on exposed surfaces and walnut mallamine polish (Asian or equivalent). The bed side unit having one drawer made of ply/board fitted on telescopic runners (Hettich/Ozone or equivalent with Italian marvel top) and 100mm SS long handles. The inside of the drawers is finished in 0.8 mm laminate of Greenlam/Merino or equivalent including carriage of material within all leads and lifts.

Providing and supplying study table 4'-0" x 1'-8" x 2'-8"(L x B x H) made of 18mm comm. board finished with 3.5mm Veneer (Greenply/Archid or Equivalent) and mellamine polish (Asian or equivalent). The legs to be made of teak wood with frame finished with mellamine polish as approved colour/shade shown in the attached picture. The table top should have a 100x100mm front pocket skirting to be provided in veneer & mellamine polish finished including carriage of material within all leads and lifts.

Providing & supplying study chair without arms of size 520x600x850mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The chair seat and backrest should be padded with polyurethane foam fully capitone upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 3" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the chair. The necessary thickness of foam should be used for cushioning of front/side approns of chair. All loose cushions and padding tobe covered with approved Upholstry with Stain and water resistant 3M coating including carriage of material within all leads and lifts

Providing & supplying chair ( rooms ground floor ) 650x550x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per designor as approved finished with PU polish (Asian or equivalentor as approved). Chair back and seat Internal frame to befixed with Heavy duty jalebi spring, padded withpolyurethane foam fully capitone upholstered fabric of dedecor, dicitex retails or equivalent or as approved makewith cost of fabric Rs. 750/- per meter. The thickness offoam should be 4" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 IgnitionSource O (Cigarette)) to provided extra softness & comfortto the chair. The necessary thickness of foam should be used for cushioning of front/side approns of chair. All loose cushions and padding tobe covered with approved. Upholstry with Stain and water resistant 3M coating

Providing and supplying Round balcony table 600 MM dia and height is 750mm. The top of the table is in glass of tile mosiac pattern ( as seen in the reference picture) including carriage of materials within all leads and lifts.

Providing and supplying Balcony chairs MS powder coated chair 450 mm dia satndard chair in MS powder coated hollow pipe frame work including carriage of materials within all leads and lifts. The seat would be in wooden.

Providing and supplying Garden Benches 1600 mm x 700 mm (H) Materials Used - Leg Support: Cast Iron | Seating Material Slats/Strips - 4mm thick and strong FRP (Fibre Rein forced Plastic)Leg Support painted with Spray Paint for shiny look . Termite proof seating material and 100% washable and waterproof. Can be easily dismantled and reassembled. Can be stored in a box in knocked down condition. Supplied in a carton in knocked down condition. Buyer need to reassemble at their end. Easy and convenient portability to lift and shift Strong and durable design to take load up to 350 Kg. distributed across the length including carriage of materials within all leads and lifts.

Providing and supplying outdoor deck furniture 600 mm dia round table height is 800mm Structure made of Mild Steel with 18 Gauge thickness (1.6 mm wall thickness) Structure frame painted with Epoxy Berger Paint which helps avoid corrosion Heavy duty build quality to tolerate maximum seating weight upto 120 kg per seater, export quality metal frame and rattan used UV Protected HPDE high quality wicker is used for this balcony sofa set which is resistant to Sun heat and Rain Includes 4 Indian made heavy duty chairs and 1 table set with 10mm toughened Glass Top including carriage of materials within all leads and lifts.

Providing & supplying stackable conference chair without arms of size 520x630x850mm (LxWxH) made up MS powder coating double dowelled for proper strength, glued and screwed/nailed properly as per design approved by HPTDC. The legs should be made MS powder coating as per design or as approved finished with PU polish (Asian or equivalent or as approved). The chair seat and backrest should be padded with polyurethane foam fully capitone upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 3" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the chair.

Providing & supplying stackable conference chair without arms of size 520x630x850mm (LxWxH) made up of hard teak wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design approved by HPTDC. The legs should be made of not free knot strong teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The chair seat and backrest should be padded with polyurethane foam fully capitone upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 3" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the chair.

Providing and supplying Conference Hall round table of 1200 MM Dia made of prelaminated MDF board (Greenply or equivalent) as per approved colour/shade. Table top edge to be binded with 1.8mm thick PVC edge binded tape all around. The table top to be properly screwed with supporting base for proper strength. Base of the table is in MS powder caoted as per colour/shade approved including carriage of materials within all leads and lifts all complete.

Providing & supplying 2 seaters sofa of size 1350x800x850mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The arm should be finished in 75mm thick as per design/snaps. The back should have quilting as per snaps. The sofa should have coil springs in seats and sinuous spring for backrest, padded with polyurethane foam fully upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 4" thick having density of 40±2Kg/m3 with 1/5" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the sofa. The necessary thickness of foam should be used for cushioning of front/side approns of sofa. All open area or base or invisible part of the sofa should be fully covered with base fabric. All loose cushions and padding tobe covered with approved Upholstry with Stain and water resistant 3M coating including carriage of material in all leads & lifts.

Providing & supplying Tea-poy/peg table with toughened Glass 8mm thick top 450x450 mm teak wood square complete in all respects

Providing & supplying Central Table Glass Top with toughened Glass 8 mm thick top 1200x600x425 mm teak wood specification to be approved by HPTDC

Providing & supplying of folding buffet table 5ft X 2.5 ft with hard board top and covered with multol cloth

Providing and supplying of Podium standerd size (as per site measurement and design approved by HPTDC)

Providing and supplying Conference hall rectangular table of 1500MM X750MM X 900MM dia made of prelaminated MDF board (green ply or equvalent) as per approved colour/design table top as to be binded with 1.8MM thick PVC edge binded tape of all around the table top to be properely screwed with sporting base for propoer strength. Base of the table should be with hard teak wood.

Providing and supplying of stage chair for VVIP's with arms classic look of size 520 X 600 X 850 MM (LxWxH) made up hard wood frame double dowelled for proper strength, glued and screwed/nailed propoerly as per design. The leg should be made of knot free teak wood as per design as per approved finished with PU polish (Asian or equivalent and as approved by the HPTDC)

Supplying of Springtek Rollaway Foam and Wrought Iron Metal Folding Single Bed with 6 Inch Contemporary Foam Mattress, Lockable Wheels- (Black)