Himachal Pradesh Tourism Development Corporation Tender

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead including carriage of materials within all leads, lifts and heights. : 100 mm dia pipe

Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials within all leads, lifts and heights.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads, lifts and heights.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials within all leads, lifts and heights. TATA/Sail or equivalent as specified by Engineer-In-Charge

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials within all leads, lifts and heights. TATA/Sail/JSW or equivalent as specified by Engineer-In-Charge

Steel work in built up Hollow section tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. including carriage of materials within all leads, lifts and heights. TATA/Apollo or equivalent (as approved by Engineer-In-Charge).

Providing and fixing 0.62mm thick Tata Durashine or equivelent prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating sheet should have protective guard film of 25 microns minimum to avoid scratches during trasportation any should have to supply in single length upto 12 metre or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing ridges or hips 60 cm overall with 0.62mm thick Tata Durashine/Century wells or equivelent prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials within all leads, lifts and heights.

Providing and fixing valley 60 cm overall 0.62mm thick Tata Durashine/Century wells or equivelent prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 300mm wide Pre-painted PGI sheet 0.47 mm thick in eaves board/facial/ soffits/ceiling incluidng cutting fixing and welding to steel roof members and complete as per the instruction of Engineer-In-Charge (base members of steel work shall be measured & paid for separately) including carriage of materials within all leads, lifts and heights.

Providing and fixing flushing 38 cm overall 0.62mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 0.60 mm thick prepainted CRIMPSHEET in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete The sheet shall be fixed using self drilling/self tapping screws of size (5.5 X 5.5 mm or as required size) with EPDM seal, complete upto any bitch in horizontal/ veritical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials within all leads, lifts and heights TATA/ Durashine or equivalent. 0.62 mm thick Prepainted sheet.

Providing and fixing LINAR sheet 0.37 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (base members of steel work shall be measured & paid separtely including carriage of materials within all leads, lifts and heights.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter including carriage of materials within all leads, lifts and heights. Supreme/D-Plast/Finolex make.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter including carriage of materials within all leads, lifts and heights. Supreme/D-Plast/Finolex make.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials within all leads, lifts and heights Supreme/D-Plast/Finolex make. 75 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials within all leads, lifts and heights Supreme/D-Plast/Finolex make.. 110 mm bend

Providing and fixing PVC Cowl ISI marked including with approved adhesive etc complete including carriage of materials within all leads, lifts and heights. 75mm

Providing and fixing PVC Cowl ISI marked including with approved adhesive etc complete including carriage of materials within all leads, lifts and heights. 75mm

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm including carriage of materials within all leads, lifts and heights.