Himachal Pradesh Tourism Development Corporation Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Tourism Development Corporation - HPTDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Oct 2022
Closing Date21 Oct 2022
Tender Amount₹ 19,15,82,247
Costs
EMD
₹ 38,32,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HPTDC_66290_1Bid Award Id
ViewTender No
Proj./4-118/2022-Vol-IIITender Authority
Himachal Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://http://hptdc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.up-to all lead and lifts as per the diretion of Engineer in Charge at site.
362.18
-
-
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping site for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
150
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
228.24
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge .
837.42
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4412.31
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
913.92
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4056.72
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiralstaircases including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
182.15
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1493.2
-
-
(h) Edges of slabs and breaks in floors and walls. Under 20 cm. Wide including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
712
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
433.13
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
15.12
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
921.23
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
51.57
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
941.7
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1718.6
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
283.48
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Fe 500/Fe 500D Tata/Sail/Jindal /Panther /JSPL / Shyam steel or as approved by HPTDC
457927.5
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
269.67
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
5511.08
-
-
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks including carriage of materials within all lead, lifts and heights as per the diretion of Engineer-In-Charge.
99.36
-
-
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
222.83
-
-
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : White sand stone (gret stone/mandi stone) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
111.04
-
-
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
16
-
-
Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour) including carriage of materials within all lead and lifts as per the diretion of Engineer in Charge.
628.09
-
-
Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately). including carriage of materials in all leads and lifts as per the diretion of Engineer in Charge.
98.31
-
-
Providing and fixing P.V.C. weepholes 100 mm diameter pipe in brick masonary/plain reinforced concrete abutment, wing walls,retaining wall extended through the full width of the structures with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
180
-
-
Providing and laying 20 cm. thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(1 cement :6 sand) and concrete backing with cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm. nominal size) on inner face of walls including centring,shuttering and propping complete up to floor two level including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
49.13
-
-
Providing and fixing 2nd class teak wood work in frames of doors, windows, clerestory window and other frames wrought, framed and fixed in position including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4.45
-
-
Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1.54
-
-
Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) 1st class deodar wood. 25 mm thick including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
269.35
-
-
Providing and fixing flat pressed 3 layer particle board Marino/Green/Kit Ply or equivalent make heavy density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. a)12 mm thick
339.31
-
-
Providing and fixing flat pressed 3 layer particle board Marino/Green/Kit Ply or equivalent make heavy density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. b) 18 mm thick
1156.73
-
-
Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marino/Green/Kit Ply or equivalent make plywood conforming to IS: 710 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge
339.31
-
-
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. 18 mm thick
206.22
-
-
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Merino/Century/Kit ply or equivalent make.
212.27
-
-
Providing and fixing 12mm fastners HILTI make as per the approved drawing & design including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
176
-
-
Providing and fixig of 8mm thick ET125 toughned reflective glass of Saint Gobain/Modi Guard or equivlent make in window panes and fixed portions complete in all respect with moulding etc including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
69.3
-
-
Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross bends and face vencering on both faces of shutter. 35mm thick Merino/Green/Kit Ply or equivalent make including black enamelled M.S. butt hinges including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
214.79
-
-
Providing and fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick Merino/Green/Kit Ply or equivalent make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
61.05
-
-
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x50 mm (base and height) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
515.7
-
-
Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Fenesta/Aluplast/Oktech make or equivelent make as approved by the Engineer-In-Charge including carriage of materials within all leads, lifts and heights. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
991.41
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1200
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness including carriage of materials within all lead, lifts and heights as per the diretion of Engineer-in-Charge.
8
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles as approved by the Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all lead, lifts and heights. Godrej or equivalent make.
106
-
-
Providing and fixing bright finished stainless steel tower bolts (barrel type) as approved by the Engineer-In-Charge with necessary screws etc. complete 250x10 mm including carriage of materials within all lead, lifts and heights
112
-
-
Providing and fixing 150 mm bright finished floor stainless steel door stopper with rubber cushion as approved by the Engineer-In-Charge, necessary brass screws etc. to suit shutter thickness complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
106
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
31.2
-
-
20 to 25mm thick average Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
316.98
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4.68
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1050.57
-
-
Supplying and fixing of class 33 Pre-laminated wooden floor HDF 12mm thick Density min 850 kg/m3 of class décor laminate min of 0.4 mm of overlay of melamine based paper with abrasion resistance cycle _6000, impact Resistance IC in IC3 for 33th class, Scratch Residence EN4383.5: satin resistance Class -5 thickness swelling _ 18% height difference max _0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick, surface soundness 1.25 N/mm of Elegance/Green panel or equivelent as approved by the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
1122.39
-
-
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shadeincluding rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc including carriage of materials within all lead, lifts and heights as approved by the Engineer in Charge.
80.73
-
-
Providing and laying vitrified floor double charged tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. 600 x 600 mm upto 1200 x 1200 mm including carriage of materials within all lead, lifts and heights as approved by the Engineer-In- Charge. Kajaria/RAK/Nitco or equivalent make. (Basic rate not less than Rs. 55/-Sqft)
1536.54
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm upto 600 x 600 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including carriage of materials within all lead, lifts and heights as approved by the Engineer in Charge. Kajaria/RAK/Nitco or equivalent make. (Basic rate not less than Rs. 45/-Sqft)
316.48
-
-
White glazed tiles 6 to 12 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of materials within all lead, lifts and heights as approved by the Engineer-In-Charge. 300X600mm thick Kajaria/RAK/Nitco or equivalent make (Basic rate not less than Rs. 50/-Sqft)
284.88
-
-
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade including carriage of materials within all lead, lifts and heights as approved by the Engineer-In- Charge.
67.2
-
-
Providing and fixing Ist quality ceramic glazed wall tiles (300x600) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all lead, lifts and heights as approved by the Engineer-In-Charge. Kajaria/RAK/Nitco or equivalent make. (Basic rate not less than Rs. 55/-Sqft)
972.3
-
-
Providing and fixing Ist quality ceramic glazed wall tiles (450x900) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all lead, lifts and heights as approved by the Engineer-In-Charge. Kajaria/RAK/Nitco or equivalent make. (Basic rate not less than Rs. 65/-Sqft)
1406.1
-
-
Providing and laying Hard Stone (cobble stone) 6"x6"x4" of approved quality flush smooth with 8mm joints on 50mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
471.03
-
-
Providing and laying pavers 80mm thick (as approved by Engineer-In-Charge) on cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. pavers NTC or equivalent (as approved by Engineer-In-Charge) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1884.1
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (Basic rate not less than Rs. 225/-Sqft)
919.37
-
-
Stone work (machine edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately 25 mm thick including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
2756.13
-
-
Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
2756.13
-
-
Providing and fixing aluminium composite panel sheet TIMEX BOND / ALSTONE/GERMANBOND 4mmx0.25mm (wooden shade) sandwitched with two aluminium coils,of aluminium alloy 5500series with dupont self adhesive paper and PVDF coating of KYNAR 500and aluminium section25mmx50mmx16 gauge, superior quality S.S.scews, fastener, screw, siliicone sealant (Dowsil 789) and masking tape, 3m double sided glazing tapes according to the drawing has been shown including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
269.09
-
-
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
159.75
-
-
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
13326.46
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
2756.13
-
-
Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
10
-
-
6mm Cement Plaster to ceiling. In cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
3753.96
-
-
Providing, fixing & applying POP false ceiling consisting of frame G.I. channel main, cross and L & hanging member of heavy quality size & shape with wire gauge mesh. Apply P.O.P. to the expended metal of thickness 10mm thick finish smooth to line & level and design including carriage of material with all lead & lifts. complete to the entire satisfaction of Architect. make- sakarni, sriram .Curved surfaces including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Adhar Shree/Sakrani/Shree Ram or equivalent make.
1165.23
-
-
Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
153.72
-
-
Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 metres height from floor level including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1165.23
-
-
Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board of approved make in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
239.08
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
87836.88
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
80975.1
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
5269.76
-
-
Providing and fixing bolts including nuts and washers complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
739.2
-
-
Providing and fixing stainles steel railing in 90 cm height of approved design with stainless steel plaster caps/ top/ hand rail etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (As per drawing/design attached)
210.55
-
-
Providing and fixing 0.62 mm thick prepainted steel sheet in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1356.45
-
-
Providing and fixing ridges or hips 60 cm overall with 0.62 mm thick prepainted steel sheets in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
245.65
-
-
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet (Tata Duroshine or equivalent make approved by Engineer-In-Charge) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
167.55
-
-
Providing and fixing flushing 38cm overall with 0.62 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
278.8
-
-
Providing & fixing 15 cm wide 45 cm overall semicircular prepainted G.I. sheet gutter with iron brackets 40x3mm size bolts & nuts with washers etc. including making necessary connection withrain water pipe complete as per design in 0.63 mm th. Sheet including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
278.8
-
-
Providing and fixing rold cold M.S. BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
556.67
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, D-Plast/Finolex/Astral or equivalent including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100 mm diameter including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
482.4
-
-
Providing and fixing on wall faces PVC D-Plast/Finolex/Astral or equivalent accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 110mm dia including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
192
-
-
Providing and fixing on wall face PVC D-Plast/Finolex/Astral or equivalent rain water pipes of working pressure not less than 4.5 kg/sqm. Weep holes 110mm dia pipes including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
384
-
-
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG -10 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
186
-
-
Slate roofing with 7.5cm lap double layer fixed on wooden battens(wood work to be paid seprately) with slate 60x30 cm size including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
186
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
16428.76
-
-
Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
16428.76
-
-
Painting two coats (excluding priming coat)on new steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt,dust and other foreign matter including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
355.63
-
-
White washing with lime to give an even shade : New work (three or more coats)including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
329.25
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
222.84
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two or more coats including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
16428.76
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
2756.13
-
-
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
50
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
355.63
-
-
Polishing two coats with malamine polish of required shade (in matt finish) on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
250
-
-
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
37.8
-
-
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
21.4
-
-
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
79.66
-
-
Providing and laying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @ 0.70 kg per sqm including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
37.8
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50metres including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
218.8
-
-
Diluting and Injecting Chemical emulation for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cementmortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
218.8
-
-
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. a) 1216 (16 mm OD) pipe
400
-
-
b) 2025 (25 mm OD) pipe
400
-
-
c) 2532 (32 mm OD) pipe
300
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. External work a) 20 mm nominal outer dia Pipes
600
-
-
b) 32 mm nominal outer dia Pipes
400
-
-
c) 40 mm nominal outer dia Pipes
300
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed
pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. 15 mm dia nominal bore
400
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. 25 mm dia nominal bore
400
-
-
32 mm dia nominal bore
300
-
-
40 mm dia nominal bore
200
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
100
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (a) 2000 litres net capacity tank including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Tata/Sintex/Jai Hind or equivalent make
16000
-
-
Providing and fixing high presssure PVC Finolex/Supreme/Hinware or equivalent make 6kg pressure heavy duty make spigot and socket waste and ventillating pipe ISI marked including fixing with approved adhasive etc complete including carriage of all labour equipment and material to various location through all modes of transportation including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 millimetres nominal size.
200
-
-
(b) 150 millimetres nominal size.
300
-
-
Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 (One hundred ten) millimetres nominal size.
100
-
-
(b) 150 mm (One hundred fifty milimeter nominal size.
160
-
-
Providing and fixing PVC floor traps Finolex/Supreme/Hinware or equivalent make of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors: as per HP.PWD specification, including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110x 90 mm(one hundred ten into ninety milimeter.
240
-
-
Providing and fixing PVC single equal branch with oval access door Finolex/Supreme/Hinware or equivalent make insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 (One hundred ten) millimetres nominal size.
100
-
-
(b) 150 mm(One hundered fifty) nominal size.
160
-
-
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts Finolex/Supreme/Hinware or equivalent make complete including fixing with approved adhesive etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
150
-
-
(b) 150 mm dia
120
-
-
Providing and fixing PVC door tee Finolex/Supreme/Hinware or equivalent make including fixing with approved adhesive etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
150
-
-
(b) 150 mm dia
120
-
-
Providing and fixing PVC collars Finolex/Supreme/Hinware or equivalent make including fixing with approved adhesive etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
150
-
-
(b) 150 mm dia
120
-
-
Providing and fixing PVC plain bend Finolex/Supreme/Hinware or equivalent make including fixing with approved adhesive etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
150
-
-
(b) 150 mm dia
120
-
-
Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) Finolex/Supreme/Hinware or equivalent make including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
46
-
-
Providing and fixing PVC cowl Finolex/Supreme/Hinware or equivalent make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 110 mm dia
20
-
-
(b) 150 mm dia
20
-
-
Providing and fixing vitreous wash down Cera Make CAMEL RIMLESS 555 x 370 x 365 mm Cat. No. S1044167 P Trap with Duroplast slim soft close seat cover or equivalent series of Hindware /Jaquar white colour studio set along with C.P. JET ,SEAT COVER, Concealed Cistern Set with Full Frame Cat. No. B1110111with buttons B1120105 - W type 1760 Shine Finish and twin flushing valves etc. complete in all respect, water closet ( European Type - WC pan) with integral 'p' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. ( snow white)
23
-
-
Providing and fixing vitreous wash down Cera Make CAPTOR 655 x 345 x 750 mm Cat. No. S1013205 S Trap 220 mm with Slim soft close seat cover S Trap 220 mm with slim soft close seat cover S Trap 220 mm with slim soft close seat cover S Trap 220 mm with Slim soft close seat cover Trap with Duroplast slim soft close seat cover or equivalent series of Hindware /Jaquar white colour studio set along with C.P. JET ,SEAT COVER, CISTERN and twin flushing valves etc. complete in all respect, water closet ( European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materialss upto all leads and lifts and as per direction of Engineer in charge.( snow white) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. ( snow white)
23
-
-
Providing and fixing wash basin with built in counter Cera CASSERO 400 x 400 x 140 mm Cat. No. S2020163 or equivalent series of Hindware /Jaquarincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
22
-
-
Providing and fixing wash basin with built in counter Cera CELERY 370 x 370 x 115 mm Cat. No. S2020164 or equivalent series of Hindware /Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
21
-
-
Providing and fixing wash basin with built in counter Cera CLOISTER SLIM 420 x 345 x 170 mm Cat. No. S2020170 or equivalent series of Hindware /Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4
-
-
Providing and fixing 15 mm nominal size F2013452 Single lever basin mixer with 315 mm (12.5") extended body and 600 mm braided connection pipe (without pop-up) or equivalent series of Jaquar/ Hindware make with 450mm braided connection pipe including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
47
-
-
Providing and fixing steel sink of Cera Make NAOMI Double bowl sink with drain board and waste bin 304 grade stainless steel Size: 1200 x 500 mm (48" x 20") Bowl Size: 385 x 400 mm (15" x 16") and 385 x 400 mm (15" x 16") Depth: 230 mm (9”) Installation: Over-mount Cat. No. B4724501 - Pearl finishor equivalent Nirali/ Diamond make of approved design size: a) including carriage of materials including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
3
-
-
Providing and fixing CP Sink Mixer F1016551 Single lever sink mixer (table mounted) with 235 mm (9”) long swivel spout and 450 mm long braided connection pipe or or equivalent series of Jaquar/Jal with 150mm long swivel spout, connecting legs and wall flangeincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
6
-
-
Providing and fixing C.P.Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin.(32 mm dia) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
6
-
-
Providing and fixing Diveter Cera make High flow single lever concealed diverter system consisting of Exposed part (lever, tip ton knob, flange) and Concealed part (45 mm cartridge with button assembly, cartridge sleeve) or equivalent or equivalent series of Jal /Jaquar with bend pipe for over head showerincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Exposed part F1018721 Concealed Part F4030101
26
-
-
Providing and fixing wall mixer Cera make Wall mixer with bend pipe for overhead shower with built-in non return valve F1099402 or equivalent or equivalent series of Jal /Jaquar with bend pipe for over head shower including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
24
-
-
Providing and fixing Urinal CALCIA EFS 360 x 330 x 740 mm Cat. No. S4010101 Snow white Cera make or equivalent including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
12
-
-
Providing and fixing Rubber plug sink(Heavy duty) as approved by the Engineer in Charge for wash basin.(32 mm dia) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
24
-
-
Providing and fixing 100mm pipes P or S Trap (Heavy Duty) for water closet PVC D-plast/ Supreme/ Phinolex including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
46
-
-
Providing and fixing bottel trap with fully casted body (with integral partition ) 32mm with 190 and 125mm long connecting pipes and wall flang Cera make Cat. No.F8060101 150mm or equivalent or equivalent series of Hindware /Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
47
-
-
Providing and fixing C.P.Brass Towell rail Cera Towel rail 600 mm (24”) F5003103 or or equivalent series of Hindware /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass (600mmx20mm). including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
26
-
-
Providing and fixing CP brass liquid soap dispenser Cera make Catalog No. F5002111 or or equivalent series of JAL /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
35
-
-
Providing and fixing CP brass waste coupling for wash basin or sink Cera make cat no F8050102 or equivalent series of Hindware /Jaquar 32 mm dia with half thread 32mm including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
47
-
-
Providing and fixing Towel rack 600mm having Cera make Cat No. - F5007101 or equivalent series of Hindware /Jaquar make with C.P. brass screw including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
26
-
-
Providing and fixing Corner Glass shelves ( medium) Cera make cat no F5005101 Glass shelf with towel rail or equivalent series of Hindware /Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
24
-
-
Providing and fixing CP brass soap dish Cera make cat no F5007106 Soap dish or equivalent series of Hindware/Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
35
-
-
Providing & Fixing in position Health Focet CERA/ JAl/ HINDWARE or equivelent make having Cat No.. F8030401AB or equivalent series of Hindware/Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
46
-
-
a) C.P. Brass coat and hat robe hook Two way Cera MakeCat No. F5002108 or equivalent series of Hindware /Jaquar including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
26
-
-
Providing and fixing C.P. Paper Holder Cera make Cat No. F5007110 or equivalent series of Jaquar/ Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
46
-
-
Providing and fixing C.P. Grab bar Cera Make Catalog No. B2210105 or equivalent series of Jaquar/ Hindware make 350mm long including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
30
-
-
Providing and fixing C.P. Grab bar Cera Make U Shaped Rail U shaped rail with wall and floor mounting 600 x 100 mm Cat. No. B2210101 or equivalent series of Jaquar/ Hindware make 350mm longincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4
-
-
Providing and fixing CP brass bib tap with long nose capstan head 15mm dia (Cera make Cat No. F1014152) or equivalent series of Jaquar/ Hindware make with wall flange and areatorincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (Long nose)
46
-
-
Providing and fixing CP brass bib tap with short body capstan head 15mm dia (Cera make Cat No. F1014151) or equivalent series of Jaquar/ Hindware make with wall flange and areator including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
46
-
-
Providing and fixing P.V.C. waste pipe of approved make for wash basin and sink including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
50
-
-
Providind and fixing 15mm nominal size Pillar cock (Cera Make Cat. No. F1014101) or equivalent series of Jaquar/ Hindware make with aeratorincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
15
-
-
Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock Cera Make Cat No. F1014201 or equivalent series of Jaquar/ Hindware make with flange including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
214
-
-
Providing and fixing C. P. Brass shower rose with 15mm or 20 mm inlet: Cera Make F7020307CH Overhead shower in size 100 x 100 mm (4 x 4”) or equivalent series of Jaquar/ Hindware make 85mm with single flow and shower arm including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
26
-
-
Providing & Fixing C.P. Towel Ring Cera Make Cat No.F5002105 or equivalent series of Jaquar/ Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
24
-
-
Providing and fixing 100mm dia C.P. Grating including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
68
-
-
Providing & Fixing single bowl sink with drain board Cera dolly make Cat No.D4722501 or equivalent series of Jaquar/ Hindware make including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
1
-
-
Providing and fixing G.I. Union (ISI Mark) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. i) 15 mm dia
120
-
-
ii) 20 mm dia
100
-
-
iii) 25 mm dia
80
-
-
Providing and laying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.. a) For vertical surface two coats @ 0.70 kg per sqm
27.9
-
-
b) For horizontal surface one coat @1.10 kg per sqm.
51.6
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:6 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:6 (1 cement : 6 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4
-
-
Providing and fixing Deck Mounted Sensor tap for table top wash basin with tap hole CERA/ JAR / JAQUAR make Having CAT NO. F6010102 . including cutting holes and making good the same:- 15mm size. including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (a) 15 mm nominal bore.
2
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. and finished smooth. Granite stone of approved stone
95
-
-
Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
30
-
-
Providing and fixing P.V.C connection with brass unions 300/450mm length including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. (i) 15mm nominal bore
218
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
45
-
-
Providing and fixing spindle fire hydrent with 65mm out let with complete with components including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
45
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
5
-
-
Constructing brick masonry for under ground C.I. inspection chamber and bends and common burnt clay building bricks in cement mortar 1:5 (1cement:5sand) C.I. cover with frame (light duty) 355mx610mm internal diamensions total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg. ) R.C.C. top slab with 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (1cement: 5sand: 10graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455mmx610 mmx450mm deep single pipe line including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
5
-
-
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1cement:6sand) per cm depth of cutting: Holes upto and including 400 sq.cm in areaincluding carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
5
-
-
Constructing soak pit 2.5 metre diametre 3.00 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75and soil waste drain pipe 100mm diametre 1.80 metre long as per standard design with F.P.S including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
2
-
-
Providing and fixing Jaquar make jacuzzi model no JWP-WHT-FONTE160CX along with necessary accesiories like side panels, bath tub filler etc including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.
4
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. (Wire-Polycab,havells, KEI make, PVC Pipe-Polyplast/Diplast/Setia make and Switches-Legrand/L&T/Havell's make or as approved by site engineer) including carriage of material in all leads & lifts. a) Group A.
95
-
-
b) Group C.
518
-
-
Wiring for twin control light point with 1.5 sq.mm HRFRLS-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LF PVC insulated copper conductor single core cable etc. as required (Wire-Polycab,havells, KEI make, PVC Pipe-Polyplast/Diplast/Setia make and Switches-Legrand/L&T/Havell's make or as approved by site engineer) including carriage of material in all leads & lifts. Group C.
68
-
-
Supplying and fixing two module stepped type fan regulator on the existing modular plate switch box including connections etc. as required. (Legrand, Havells, L&T make or as approved by site engineer.) including carriage of material in all leads & lifts.
57
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand,Havells, L&T make or as approved by site engineer) including carriage of material in all leads & lifts. a) S.P. 5/ 6 Amps one way Modular switch.
142
-
-
b) 5 pin, 5/ 6 Amps Modular socket outlet.
142
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(Legrand/Havell's/L&T make or as approved by the Engineer in charge) including carriage of material in all leads & lifts.
132
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Legrand/Havell's/L&T make or as approved by the Engineer in charge) including carriage of material in all leads & lifts.
147
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (Polycab,havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts. 1 run of cable
1350
-
-
Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Polycab,havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts. a) 1 x 1.5 sq. mm
870
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1364
-
-
b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2370
-
-
c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
250
-
-
d) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire
90
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab,havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts. a) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
430
-
-
b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
170
-
-
c) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
40
-
-
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. (Polyplast/Diplast/Setia make) including carriage of material in all leads & lifts. a) 25 mm dia. ISI marked, PVC conduit
350
-
-
b) 32 mm dia. ISI marked, PVC conduit
50
-
-
c) 40 mm dia. ISI marked, PVC conduit
80
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/havells/L&T make or as approved by site engineer) including carriage of material in all leads & lifts. a) Single pole
226
-
-
b) Double pole 32Amp
2
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 Milliampere in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/havells/L&T make or as approved by site engineer) including carriage of material in all leads & lifts. a) 40 Amps. Cat-A.
1
-
-
b) 63 Amps. Cat-A
27
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/havells/L&T make or as approved by site engineer) including carriage of material in all leads & lifts. a) 40 Amps. Cat-A.
3
-
-
b) 63 Amps. Cat-A.
2
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand/havells/ L&T make or as approved by site engineer) including carriage of material in all leads & lifts. a) Double door-4 way
1
-
-
b) Double door-6 way
1
-
-
c) Double door-8 way
23
-
-
d) Double door-12 way
5
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand/ L&T/ havells make or as approved by site engineer) including carriage of material in all leads & lifts. a) Double door-4 way (4+12),horizontal type
4
-
-
b) Double door-6 way (4+18),horizontal type
1
-
-
c) Double door-8 way (4+24),horizontal type
1
-
-
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(Legrand/Havell,s/L&T/Panasonic make) including carriage of material in all leads & lifts. a) 2 modules (78mm x 78 mmx50mm)
62
-
-
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections (Legrand/Havells/L&T/Panasonic make or as approved by site engineer) including carriage of material in all leads & lifts. a) Telephone socket outlet, Modular.
38
-
-
b) TV. Socket outlet, modular.
30
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts. a) 1 Pair
831
-
-
2 Pair
690
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (Polycab, Havells, KEI make or as approved by site engineer) including carriage of material in all leads & lifts.
800
-
-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required (Bajaj,Havells,Panasonic make or as approved by site engineer) including carriage of material in all leads & lifts.
27
-
-
Earthing with COPPER earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including carriage of material in all leads & lifts.
12
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required including carriage of material in all leads & lifts.
2
-
-
Providing and fixingG.I.. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) including carriage of material in all leads & lifts.
30
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) including carriage of material in all leads & lifts.
40
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required including carriage of material in all leads & lifts..
150
-
-
Providing and fixing 4.00 mm dia copper wire on surface or recess for loop earthing as required Havell's/KEI/L&T make or it's equivalent as approved by the Engineer in charge including carriage of material in all leads & lifts..
120
-
-
Providing, installing, testing and commissioning of decorative ceiling fan and regulator, including wiring, the down road of standard length(upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha/Havells/Orient make or as approved by Engineer in charge including carriage of material in all leads & lifts) a) Ceiling Fan 1200 mm sweep, category-A
5
-
-
b) Ceiling Fan 1400 mm sweep, category-A
53
-
-
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by including carriage of material in all leads & lifts.) including carriage of material in all leads & lifts. Exhaust Fan, Light duty, 300 mm sweep
42
-
-
Exhaust Fan, Heavy duty, 300 mm sweep
5
-
-
Providing and installation of stationary storage type Electric water heater 35 ltrs (Geyser) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.(Sepherehot/Bajaj/ Havells make or as approved by Engineer in charge) including carriage of material in all leads & lifts. 35 Liter capacity water heater (Cat-A)
32
-
-
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Polycab/Havells/KEI make as approved by including carriage of material in all leads & lifts) including carriage of material in all leads & lifts. Armoured cable 6sq. mm (2 core)
80
-
-
Armoured cable 10 sq. mm (4core)
150
-
-
Armoured cable 25sq. mm (3.5 core)
50
-
-
Armoured cable 70sq. mm (3.5 core)
40
-
-
Armoured cable 120 sq. mm (3.5 core)
40
-
-
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab/Havells/KEI make as approved by the Engineer incharge) including carriage of material in all leads & lifts. Armoured cable 6sq. mm (2 core)
490
-
-
Armoured cable 10 sq. mm (4core)
150
-
-
Armoured cable 25sq. mm (3.5 core)
20
-
-
Providing and fixing of Oriel Next Wall light Model No. 34141 Giraffe Dim, colour Brushed Nickel for metal and Milky White for diffuser, Philips make with integrated LED 15Watt Warm White colour complete with all accessories including connections, testing and commissioning as required. (Panasonic/Philips/Bajaj or It's equivalent as approved by the the Engineer in charge) including carriage of material in all leads & lifts.
32
-
-
Providing and fixing following type of Recess fixture Functional Downlight HexaStyle, White, 15watts warm white colour, Philips make, Diameter 178 mm, Cut out length: 15cm, Cut out width: 15cm, Height: 2.1 cm,Length: 17.8cm, Net weight: 0.15kg, Width 16cm complete with all accessories, connections, testing and commissioning etc. as required. Panasonic/Philips/Bajaj make or as approved by the Engineer incharge including carriage of material in all leads & lifts.
281
-
-
Providing and fixing following type of surface fixture essentail smart batten Philips make cat no. BN170CLED40S4000K PSU L120 (1x4fts), 40Watts complete with all accessories, connections, testing and commissioning etc. as equired. (Panasonic/Philips/Bajaj make or as approved by the Engineer incharge) including carriage of material in all leads & lifts.
33
-
-
Providing and fixing following type of Recess fixture Green Perform Sleek Philips make DN296B LED20S-6500 PSU WH 20 watts complete with all accessories, connections, testing and commissioning etc. as required. (Panasonic/Philips/Bajaj make or as approved by the Engineer incharge) including carriage of material in all leads & lifts.
58
-
-
Providing and fixing following type of Recess fixture sky COB Philips make 7W SKYCOBTILTLEDSPOT LIGHT (WW) 7 watts complete with all accessories, connections, testing and commissioning etc. as required. (Panasonic/Philips/Bajaj make or as approved by the Engineer incharge) including carriage of material in all leads & lifts.
50
-
-
Providing and fixing of Surface/Suspended mounted waterproof (IP65) luminaire suitable for single and twin T8 TLED lamps. TCW450 P 2XTLED 19W P3397 T-8 Philips make complete with all accessories (including Essential two Led tubes 20W B2B 865 T8) including connections, testing and commissioning as required. (Panasonic/Philips/Bajaj make or as approved by the Engineer incharge) including carriage of material in all leads & lifts.
10
-
-
Providing and fixing of Mirror Light 31165 Philips make complete with all accessories including connections, testing and commissioning as required. (Panasonic/Philips/Bajaj make or as approved by site engineer) including carriage of material in all leads & lifts.
53
-
-
Supply, Installation, testing and commissioning of "Do Not Disturb" and MMR Control Unit Make -Legrand, Model-Myrius Next Gen Cat no. 6792 56 and 6792 57 in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells, L&T make or as approved by site engineer) including carriage of material in all leads & lifts.
27
-
-
Supply, Installation, testing and commissioning of 16Amp. Single Phase Key FOB Switch Make-Legrand, Model-Myrius Next Gen, Cat no. 6792 53 with three no of keys Cat. no. 6792 55 for switch on and off light in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells, L&T make or as approved by site engineer) including carriage of material in all leads & lifts.
27
-
-
Supply, Installation, testing and commissioning of 40A Power Contractor with two NO and signaling auxiliaries for contactors conforming to IEC/EN 61095 for single Phase switching of internal lighting in the room Make Legrand, Model-CX3 Cat no. 4125 45 and 4124 31, L&T, Havell's, or it's equivalent as approved by the Engineer in charge including including carriage of material in all leads & lifts.
27
-
-
Supply, Installation, testing and commissioning of 63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Legrand make Cat No. 027029 ,63 Amp FP, MCCB having space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated L&T, Havell's, Legrand make or it's equivalent as approved by the Engineer in charge including including carriage of material in all leads & lifts.
2
-
-
Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated L&T, Havell's, or it's equivalent as approved by the Engineer in charge including including carriage of material in all leads & lifts. a) 100 AMP three phase Bus Bar Chamber Havells/Legrand/L&T make Cat No. IHBC010008 having with Legrand make Cat No. 027018 , 100 Amp FP, MCCB as approved by the Engineer in charge including carriage of material in all leads & lifts.
3
-
-
Supplying and fixing of Boundary wall Light Havells LEXO (PRISMATIC) Cat No. LHFOGAE1T11F0, high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base. including 0.30 mtr. 40mm G.I.pipe for fixing, containing one no. 2way MCB DB ,6 Amp. MCB,painting complete with all accessories including 5W LED lamp including making connections, testing etc. as required or as approved by site incharge (Philips/Bajaj/Wipro make or as approved by site engineer) including carriage of material in all leads & lifts.
20
-
-
Supply, installation, testing and commissioning of 1.5 TR capacity dual inverter AC single phase 220 v Split type Air Condioner (Hot and cold) with stand complete in all respect including connection etc. L.G./Samsung/Hitachi make or asapproved by the Engineer-in-charge including carriage of material in all leads & lifts.
47
-
-
Supply,fixing the copper pipeing with insulation and 4 core wire for split Ac inluding drain pipe complete in all respect including embeding the copper pipe and drain pipr in the existing wall and touching the same with wall putty and painting etc. as per direction of Engineer-in-charge including carriage of material in all leads & lifts.
80
-
-
SITC of Philips/Panasonic/Bajaj make Gamma Double Led outdoor Up-Down light 4W Warm White, colour Anthracite finish, Material Premium aluminum, IP 44 including all accessory and all lift and lead or as approved by site engineer) including carriage of material in all leads & lifts.
20
-
-
SITC of Alpha Wall Washer Led outdoor Wall light 12W Warm White, IP44, Colour Anthracite finish, Material Premium aluminum including all accessory and all lift and lead. (Philips/Bajaj/ Panasonic make or as approved by site engineer) including carriage of material in all leads & lifts.
15
-
-
SITC of Philips/Panasonic/Bajaj make Step Light, Colour Anthracite, Material Aluminum Base, LED 3W Warm White including making connections, testing etc. or as approved by site engineer) including carriage of material in all leads & lifts.
20
-
-
Providing and fixing of Outdoor Led Strip LSTP04X015XM 75W, 15 W/Mtr. Strip Light (1 Pack of 5 Mtr.) IP65 RGB in Colour LED Strip for Cove/facade Lighting including drivers for suitable for installing in cove. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. Philips/Havell's/ Bajaj Panasonic make or as approved by the Engineer in charge including carriage of material in all leads & lifts.
100
-
-
Supplying and fixing of Philips/Panasonic/Bajaj make Uniflood flood light luminaire Cat No. BVP120 LED 70 CW FG S1 PSU GR, IP66, 70Watt Warm White colour in colour with single die ceramic base, high power LED, PDC housing and unique flood optics (NB) to ensure uniform distribution and complete with all accessories including P/F M.S. Cage duly painted according to its size requirement making connections, testing etc. as required. or as approved by site incharge including carriage of material in all leads & lifts.
2
-
-
SITC of UL listed/FM approved Intelligent Addressable Fire alarm control panel. The panel shall be networkable & expandable having required number of loop for 850 addressable detectors & 200 addressable devices . The panel shall have 240V AC power supply, automatic battery charger, 24V SMF batteries sufficient for 24 hour in standby and 15 minutes in alarm complete as per specification. UL listed 6" Touch screen LCD display supporting smart degrade mode operation. UL listed 12 Amps inbuilt power supply with 70Ah capacity battery charge. UL Listed Lead Acid battery charging capacity for second dry power supply. (MAKE: SIEMENS, HONEYWELL, BOACH or Equivalent as approved by the Engineer in charge) including carriage of material in all leads & lifts.
1
-
-
SITC of UL listed Intelligent Addressable Multi application multi criteria detector with responsiveness of photoelectric, thermal technology and false alarm resistance along with base. The detector shall have Tri colour LED for Normal, Fault & Alarm condition. The detector shall have infrared Light Emitting Diode & photo sensing diode. The detector shall have facility to mount in different comprehensive environment like Hostile environment, Parking Garage, HVAC Ducts, Precious storage, Transformer rooms Ware house, Dormitory and normal working environments. Vendor to include suitable mounting box as required.(MAKE: SIEMENS or Equivalent as approved by the Engineer in charge) including carriage of material in all leads & lifts..
50
-
-
SITC of UL listed Intelligent Analogue Addressable Type Rate of Rise/Fixed Heat Detector with inbuilt turbo Isolator Complete with LED, addressing done by the FACP, complete with Mounting Base as required. (MAKE: SIEMENS or Equivalent as approved by the Engineer in charge) including carriage of material in all leads & lifts.
6
-
-
SITC of UL listed Intelligent addressable Manual Call Point - Pull station ,polarity insensitive technology complete as per specification.(MAKE: SIEMENS or Equivalent as approved by the Engineer in charge) including carriage upto all lead and lifts.
6
-
-
SITC of UL listed Multi Tone Hooter suitable for Alarm siren. It shall meet the audibility requirements for smoke alarms as specified in UL Listed Single and Multiple Station Smoke Alarms.(MAKE: SIEMENS or Equivalent as approved by the Engineer in charge) including carriage of material in all leads & lifts.
6
-
-
SITC of UL listed addressable Control cum Monitor Module ( Independent Single Input & Single Output) polarity insensitive technology, in complete as per specification for AHUs, Hooter, Flow switches, third party system integration etc. (MAKE: SIEMENS or Equivalent as approved by the Engineer in charge), including carriage of material in all leads & lifts.
6
-
-
SITC of UL listed Fault Isolators complete as per specification. The fault isolator shall not occupy any address point in the loop.(MAKE: SIEMENS or Equivalent as approved by the Engineer in charge) including carriage of material in all leads & lifts.
3
-
-
Supply Installation, Testing & commissioning of PA system YAMAHA PX3 DUAL CHANNEL 2X500W LIGHTWEIGHT POWER AMPLIFIER with Yamaha MG10 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) / 1 Stereo Bus / 1 AUX (incl. FX) with same 10 zone floor selector console a change over Panel for connection to the Fire Alarm Panel, a Microtek 36MX1KK11 1KVA / 800W UPS with standby battery of 26Ah SMF of 2 x 12 Volts and a monitor panel all pre wired and rack mounted, 1 No. AHUJA Cordless GOOSNECK Microphone AWM630VG complete in all respects & as per specification. PA system shall be coupled to the Fire Alarm System. (MAKE: Yamaha, Behringer, Bosch) including carriage upto all lead and lift and as approved by the Engineer in Charge.
1
-
-
SITC of Ceiling/ Wall Mount Speaker with operations from 3 to 6 Watts. (MAKE: JBL/Sony/Behringer or equivalent as approved by the Engineer in charge), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
30
-
-
Supplying and laying of 1.1 KV Grade 2 X 1.5 sq.mm. copper cables on surface / conduit complete with clamps etc as reqd. (MAKE: GLOSTER/ KALINGA/ GRANDLAY/ HYGLOW ), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
800
-
-
SITC of 3KVA UPS on line, Double conversion, Micro-processor controlled with LCD,
Input Voltage: 230V, Freq : 40-70HZ, PF:0.95, Output : 220Volt ± 2%, Freq: 50HZ ± 0.05HZ, PF:0.8
with SMF batteries for 30min backup on full load. (Make: EMERSON/MICROTEK/Luminous), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
1
-
-
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required of Polyplast/Diplast/Setia make including carriage of material in all leads & lifts..
50
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. (Polycab, Havells, KEI or as approved by site engineer) Speaker cable Single pair, 2-core, 1.5 sqmm
350
-
-
Providing and fixing HIKVISION IP 4MP COLOR VU BULLET CCTV (DS-2CD1047G0-L) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE, Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
4
-
-
Providing, fixing HIKVISION IP 4.0MP DOME NETWORK CCTV CAMERA (DS-2CD1343G0E-I) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V & PoE; Two Years Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
15
-
-
SITC of HIKVISION IP 4MP 25X 100MTRS PTZ SPEED DOME CAMERA (DS-2DE4425IW-DE) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25× optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, Two Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
1
-
-
SITC of HIKVISION 32 CHANNEL 4K H. 265+ NVR (DS-7732NI-K4), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160)resolution , incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port upto 6TB each, Two Years Warranty and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge.
1
-
-
SITC of Power Supply ISI MARK including 3 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
1
-
-
SITC of RJ-45 connector including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
5
-
-
SITC of 16 PORT POE SWITCH 75 WATTS including 3 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.
3
-
-
Providing and fixing Samsung 32 inches 1920 x 1080 Pixels M5 (81.28cm) (Samsung /Sony make ) (LS32AM500NWXXL, Black) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer incharge.
1
-
-
Providing and fixing Polycab make cctv 4+1 wiring for fixing of cameras in the existing PVC conduit as per requirement & three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
400
-
-
Providing Hard disk (8TB hard disk Seagate make) including three year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.
1
-
-
Providing and fixing of Crotomak make 6U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex,Lepose make or as approved by site engineer)
1
-
-
Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 Tata/Jindal make with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required with the prior approval of the Engineer in charge including carriage of material in all leads & lifts. a) 80 mm dia pipe
25
-
-
b) 100 mm dia pipe
30
-
-
c) 150 mm dia pipe
250
-
-
d) 200 mm dia pipe
15
-
-
Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 450 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required Valves of Zoloto/Kirloskar/Leader/Sant Make with the prior approval of the Engineer in charge including carriage of material in all leads & lifts.
1
-
-
Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 250 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required Valves of Zoloto/Kirloskar/Leader/Sant make with the prior approval of the Engineer in charge including carriage of material in all lead and lifts.
1
-
-
Providing and fixing of Minimax make item code I00016324 MMX Fire Hose Type 1, 15M length with Gun Metal Coupling ISI marked non-percolating flexible firefighting two layered delivery hose, synthetic fiber circular woven jacketed, bearing IS:636-2018, 63 mm dia, complete with instantaneous male & female coupling (IS:903) and Copper Wire binding Make:- Lifeguard/Minimax/ Safefire or as approved by the Engineer in charge including carriage of material in all leads & lifts.
22
-
-
Providing and fixing Minimax make item code I00003810 Hose Reel Drum With GM Nozzle & Rubber Hose - 30M Swinging Hose reel Type-A, Wall Mounted with 180° swing, specifications as per IS-884: latest revision made of high quality mild steel, powder coated in red colour. Maximum operating pressure 10 bar, Flow rate 22.5 lpm at 7 bar pressure of Make:- Lifeguard/Minimax/ Safefire or as approved by the Engineer in charge including carriage of material in all leads & lifts.
3
-
-
Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A') and including all lead and lift Make:-Agni/Suraksha/omex or as approved by the Engineer in charge including carriage of material in all leads & lifts.
11
-
-
Providing & fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box and Fire Duct Door (900mmx1200mm) for MS pipe, Hose pipe, Hose Reel Drum, Fire Extinguisher complete as requried Agni/Suraksha/Omex or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts a) Fire Hose Cabinet (30''x24''x10'')
11
-
-
Fire Duct Door (900mm x 1200mm)
3
-
-
Providing and fixing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 Minimax Make item code I00003796, Four Way Collecting Breaching Head - PCD 240mm and including Minimax make item code I00003822 Short Branch Pipe with 20mm nozzle, 63mm Inlet & 20mm Outlet, IS:903 - Gun metal and necessary support complete in all respect Make:- Lifeguard/Minimax/Safefire or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts a) Four Way
1
-
-
Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm Make:- Zoloto/Kirloskar/Leader/ Sant or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts a) 80 mm Dia
10
-
-
b) 100 mm Dia
1
-
-
c) 150 mm Dia
5
-
-
Providing and fixing Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect Make:- Zoloto/Kirloskar/Leader/ Sant or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts. a) 80 mm dia
1
-
-
b) 100 mm Dia
1
-
-
c) 150 mm Dia
3
-
-
Supply, Installing, testing and commissioning of 100 mm dial type pressure gauge gate valve with all accessories as requried Make:- Lifeguard/Minimax/Safefire or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts.
5
-
-
SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect of approved brand with prior approval of the Engineer in charge including carriage of material in all lead and lifts.
3
-
-
Kirloskar Make pump Modal DB 80/26 Electrical Motor Driven Automatic pressurisation (Main PUMP) pumping set consisting of the following as per specifications. Horizontally mounted centrifugal type single/multi-stage fire pump capable to deliver approx 2280 LPM against a total head of 70 M, having cast iron body. bronze impeller, stainless steel shaft and complete with b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts + 10% - 15% 3 phase. 50 HZ A.C. supply of suitable capacity (approx. 45 KW, 60 HP) for the above pump with synchronous speed of 2900 RPM confirming to & duly coupled with above pump coupled with flexible coupling including as per relevant Indian Standard and specifications of Kirloskar/ Lubi / Crompton make
1
-
-
Diesel Engine Driven Fire Pumping set suitable for automatic opreation consisting of the following as per specification. A) Horizontally mounting,centrifugal type single/multi-stage fire pump having cast ironbody, bronze impeller,stainless steel shaft &capable of delivering 2280 LPM against a total head of 70M complete for perodical testing of thepumping set of the pumping set as per TAC rules. b) Water cooled TAC approved Diesel Engine suitable for the developing at least 62 BHP at 1500/1800 RPM) for above pumping complete with autmatic starting mechanism, batteries,automatic battery charger unit,flexble coupling withthe pump,coupling with the pump,fuel tank, asper TAC rules including earthing,mandatory spares and tool kit. c) Common bed plate for mounting pump and Engine fabricated of suitable MS channel as per manufacturer recommendations. Make KIRLOSKAR/Lubi/ Crompton or as approved by the Engineer in charge including carriage of material in all lead and lifts.
1
-
-
a) Electrical Motor Driven Automatic pressurisation(Jockey) pumping set consisting of the following as per specification Horizontally mounted centrifugal type single/-stage fire pump for building pressure loss due to any leakage in the system and capable to deliver approx 180 LPM against atotal head of 70M heaving cast iron body.bronze impeller,stainless steel shaft and complete withY strainers on suction side pressure Gauge. b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts +10%-10% 3 phase 50HZ AC supply of suitable capacity(appro10KW) for the above pump with synchronous speed of 1500/3000 RPM confirming to IS325 &duly coupled with above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification. c) Common bed plate for mounting pump and Motor fabricated of suitable MS channel as per manufactures recommendation.d) Suitable RCC pump foundation as per manufactures design Dunlop 4 Nos Dunlop Anti-vibration( cushy foot) heavy duty mounting pads. Make KIROLASKAR/Crompton/Lubi or as approved by the Engineer in charge including carriage of material in all lead and lifts.
1
-
-
SITC of electrical main control panel made 16 gauge sheet with power coating consisting of following items.1No. Voltmeter with selector switch 3Nos Ampere meter with selector switch 3Nossets ofcurrent transformer MCCB 200Amp-1No MCCB160 Amp 1No Automatic starter,60 HP motor battery charging set Engine start-stop Relay Engine control ANF relay Engine crank relay Audio Hooter DC control relay Engine control selector switch 63 Amp MCCB-starter 15 HP motor 3 set of the start stop switch 9Nos.indicating lamps Automanul switchset, interlocking kit/terminal charging rate selector switch of trickle/boost and including all lead and lift
1
-
-
Providing and fixing 25mm dia gate valve with all accessories complete as requried Make:- Zoloto/Kirloskar/Leader/ Sant or equivalent make as approved by the Engineer in charge including carriage of material in all lead and lifts.
5
-
-
Providing and fixing of Fire bucket stand Minimax make item code I00000089 for 4 buckets with four nos. fire buckets Minimax make I00016356 MMX 10 Litre complete in all respect.or as per norms of fire deptt Make:- Lifeguard/Minimax/ Safefire or as approved by the Engineer in charge including carriage of material in all leads & lifts.
2
-
-
Providing and fixing of Fireman Axe with Insulated Handle Minimax make item code I00003814 (Agni/Suraksha/omex make) or as approved by the Engineer in charge including carriage of material in all leads & lifts.
3
-
-
Providing fixing, testing and commissioning PORTABLE CO2 TYPE FIRE EXTINGUISHERS, Minimax make Item code I00006119 MMX CO2 4.5 Kg IS:15683 (Squeeze Grip Valve) (Fire Rating 55B ) Carbon Di-oxide agent Type Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Containing CO2 gas having purity 99.7% filled in Seamless Cylinder having approval from Petroleum and Explosives Safety Organisation (PESO), coated with High Glossy PU Paint, ISI marked Dual Spindle Valve with Aluminum Wheel & Collar / Squeeze Grip brass valve, Aluminium Siphon tube, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual.
9
-
-
Providing fixing, testing and commissioning of PORTABLE WATER CO2 STORED PRESSURE FIRE EXTINGUISHERS Minimax make I000156501 MMX 9L - IS:15683 (Fire Rating 4A, 75F 233 Stored Pressure Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Epoxy Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual of Make:- Lifeguard/Minimax/ Safefire or as approved by the Engineer in charge including carriage of material in all leads & lifts.
9
-
-
Supply, installation, exit sign board as per direction of Engineer- in- charge including carriage of material in all lead & lifts Make:- Lifeguard/Minimax/ Safefire or as approved by the Engineer in charge including carriage of material in all leads & lifts.
8
-
-
Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction including carriage of material in all leads & lifts. (L&T, Havells, Simmens or as approved by the Engineer Incharge) Incoming 1 Nos.400A, FP, 25 kA, MCCB with Microprocessor based release having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc. Bus bar 1 set of600 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors. Outgoings 1 No.200A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals. 4 No. 125 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals. 2 No. 100 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals. 3 No. MCB TPN 63 Amp. 3 No. MCB DP 63 Amp. Instruments 1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch. 1 Nos. 0-150 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch. 1 Set R Y B phase indicating lamps with protection fuses. 1 Lot of control wiring. 1 Set of designation plates.
1
-
-
Supply, erection and testing of ornamental light Alliance Small fixture containing two no. 40W LED lamp on 3350mm high cast aluminium pole (Polyester/PU Painted/ Black/Antique finish) Twinkle make cat no. LuxMax AUSTIN Pole with BKT-102 (DOUBLE ARM) for road side and landscape lighting in position on M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the. flushing the ground level, including supply and fixing of 2nos 4cX 4\6\10 sqmm AL.Armd cable gland, 1 no. 10 AMP. SP MCB with din bar arrangement and earthing links complete in all respect and two nos. 40 w LED lamp with one coat of paint and Himachal Tourism logo engraved at the base of the pole Complete in all respect. (Bajaj/K-Lite/Panasonic make or as approved by site engineer) including carriage of material in all leads & lifts.
4
-
-
Supplying, installing, testing and commissioning of 8 passenger,544kg lift of following spcefications. HOISTWAY DIMENSIONS (W x D – mm):1800 mm W x 1600 mm D, CAR DIMENSIONS (W x D x H - mm) :1100 mm W x 1300 mm D x2139 mm H, CAR & HOISTWAY DOOR TYPE : Central opening (CO) doors DOOR OPENING (W x H - mm) :800 mm W x 2000 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in Hairline Bronze SS, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off and Voice Synthesizer Complete in all respects (Make:- OTIS/Schneider/ Kone or equivalent make as approved by the Engineer in charge)
1
-
-
Supplying, installing, testing and commissioning of 6 passenger408kg lift of following spcefications. HOISTWAY DIMENSIONS (W x D – mm):1800 mm W x 1500 mm D, CAR DIMENSIONS (W x D x H - mm) :1000 mm W x 1100 mm D x2139 mm H, CAR & HOISTWAY DOOR TYPE : Central opening (CO) doors DOOR OPENING (W x H - mm) :800 mm W x 2000 mm H, DOOR OPERATOR : DC Door Operator COP : Ambiance COP in Hairline Bronze SS, CAR POSITION INDICATOR : Monochrome LCD Black background with white font Dot matrix (LED) Scrolling Display. STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off and Voice Synthesizer (Make:- OTIS/Schneider/ Kone or equivalent make as approved by the Engineer in charge) including carriage of material in all leads & lifts.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements