Himachal Pradesh Tourism Development Corporation Tender

Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete as per the diretion of Engineer in Charge including carriage of materials within all lead and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all lead and lifts .

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Fe 500/Fe 500D Tata/Sail/Jindal /Panther /JSPL / Shyam steel or as approved by HPTDC

Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour) as per the diretion of Engineer in Charge including carriage of materials within all lead and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) as per the diretion of Engineer in Charge including carriage of materials within all lead,= and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) as per the diretion of Engineer in Charge including carriage of materials within all lead and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing Sal wood work in frames of doors, windows, clerestory window and other frames wrought, framed and fixed in position as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marino/Green/Kit Ply or equivalent make plywood conforming to IS: 710 as per the diretion of Engineer in Charge Kiln Seasoned and chemically treated Hollock wood shutter including carriage of materials within all lead, lifts and heights

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln Seasoned and chemically treated Hollock wood shutter including carriage of materials within all leads, lifts and heights.

Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross bends and face vencering on both faces of shutter. 35mm thick Merino/Green/Kit Ply or equivalent make including black enamelled M.S. butt hinges as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Providing & fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Providing and fixing 2nd class teak wood wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 50 x 20 mm as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Stone filling behind retaining walls as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all lead and lifts .

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Providing and laying colored glazed tiles (Nitco/ Kajaria/ RAK) in skirting, riser of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry of size 600x300mm as per the direction of Engineer-In-Charge including carriage of materials in all leads lifts and heights.

Providing and fixing 8 to 10mm thick heavy duty colored ceramic glazed tiles (Nitco/ Kajaria/ RAK) in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement:3sand) 600x600mm with flush Pointing in white cement upto all floor as per the direction of Engineer-In-Charge including carriage of materials in all leads lifts and heights .

Providing and fixing colored glazed exterior wall tiles (Nitco/ Kajaria/ RAK) in skirting, riser of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry of size 450 x 300mm as per the direction of Engineer-In-Charge including carriage of materials in all leads lifts and heights.

Chequerred precast cement concrete tile 22 mm thick in foothpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing cleaning etc complete on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 sand) light shade pigment using white cement as per the direction of Engineer-In-Charge including carriage of materials in all leads lifts and heights.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.

Providing and fixing 0.62 mm thick prepainted steel sheet in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Providing and fixing ridges or hips 60 cm overall with 0.62 mm thick prepainted steel sheets in roofing (Tata Duroshine or equivalent make approved by Engineer-In-Charge) with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Providing and fixing MS BP sheet 1.66 to 2.0mm (Rolled cold) thick in eves board/facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of Engineer-in-charge.(Base members of steel work shall be measured & paid for separately) as per the diretion of Engineer in Charge including carriage of materials in all leads & lifts.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge including carriage of materials in all leads & lifts.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer as per the diretion of Engineer in Charge including carriage of materials in all leads & lifts.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5.5 mm thick glass panes as per the diretion of Engineer in Charge including carriage of materials in all leads & lifts.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. (Basic rate not less than Rs. 225/-Sqft)

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work as per the diretion of Engineer in Charge

Providing and fixing bright finished stainless steel sliding door bolts of apprved make complete with nuts and screws etc. complete including carriage of materials in all lead, lift and heights Godrej/Tata/Jindal or equivalent make. a) 250x16mm.

Providing and fixing bright finished stainless steel handles of approved make with screws etc. complete including carriage of materials in all lead, lift and height Godrej/Tata/Jindal or equivalent make. a) 250mm.

Providing and fixing bright finished M.S tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej/Kath/Jindal or equivalent make. b) 200x10mm.

Providing and fixing bright finished M.S tower bolts (barrel type) of approved make with nuts and screws etc. complete including carriage of materials in all lead, lift and height. Godrej/Kath/Jindal or equivalent make. c) 150x10mm.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights .

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 15 km periphery area for all lifts, complete as per directions of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Supreme/Finolex/Victus or equivalent make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes including carriage of materials within all lead, lifts and heights .

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Supreme/Finolex/Victus or equivalent make, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 75 mm nominal inner dia Pipes including carriage of materials within all lead, lifts and heights .

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Supreme/Finolex/Victus or equivalent make, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 100 mm nominal inner dia Pipes including carriage of materials within all lead, lifts and heights .

Providing and fixing viterous China urinal of 381x330x550mm Kohler make Cat No. K207131N-ER-O or equivelent series of Grohe/Hindware/Jaquar make as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads lifts heights.

Providing and fixing curved shape urinal partition with frosted glass of Jaquar make Cat No. SJSE-CHR-810UC450X or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads lifts heights.

Providing and fixing urinal sensor in polished chrome of Kohler make Cat No. K-241191N-CO1-CP or equivelent series of Grohe/Hindware/Jaquar make as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads lifts heights.

Providing and fixing vitrous snow white colour single piece water closet with cistern and accessories of Kohler make Cat No. K-39831N-S-O or equivelent series of Grohe/Hindware/Jaquar make as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads lifts heights.

Providing and fixing 472 mm round vessel vitreous snow white colour Kohler make Cat No. K-253181N-O counter top wash basin with fixing accessories complete fixed with nuts-bolt or equivalent series of Grohe/Hindware/Jaquar make as per the direction of Engineer-In-Charge including carriage of materials within all leads lifts heights.

Providing and fixing vitrous china Indian water closet with cistron complete fixed with neccessaory nuts and bolts as per the direction of Engineer-In-Charge including carriage of materials within all leads lifts heights.

Providing & fixing 15 mm dia C.P. brass angle valves with 450mm long C.P. Copper connecting pipe union nut C.P. cast brass wall flange. Jaquar Cat No- CON-059KN or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing C.P. brass Shop Dish of Jaquar Cat No- CAN-1131N or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing C.P. brass Toilet paper holder of Jaquar Cat No- ACN1151N or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing 32 mm dia with 250mm and 190 mm long wall connection pipes and wall flange for wash basin and sink of Jaquar make Cat no-ALD-769L300X190 or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing C.P. waste coupling of Jaquar Make Cat No ALD-705 or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing C.P. gratting 100mm dia including cutting floor tile and fixing with white cement mixed with pigment matching with shade of floor tile as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing C.P. Health faucet (heavy duty) with flexible pipe of Jaquar Make Cat No ALD-573 or equivelent series of Cera/Hindware make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (a) 2000 litres net capacity tank including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge. Tata/Sintex/Jai Hind or equivalent make

Providing and fixing 5mm ornamentle looking mirror of Modi guard make grinding complete fixed with studs & washers on the wall tiles including carriage of materials in all leads lifts and heights.

Providing and fixing C.P brass Piller Tap of Kohler make Cat No. K-723261N-4-CP or equivelent series of Grohe/Hindware/Jaquar make as per the direction of Engineer-In-Charge incluidng carriage of materials within all leads lifts heights.

Providing & fixing CPVC gate valve 20mm outer dia (avg) of Finolex make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing & fixing CPVC floor trap 75mm dia for wash basin and sink as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all lead, lifts and heights as per the diretion of Engineer in Charge.