Himachal Pradesh State Electricity Board Limited Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh State Electricity Board Limited - HPSEBL Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date11 Feb 2025
Closing Soon25 Feb 2025
Tender Amount₹ 8,01,60,741
Technical
Technical
Financial
Class Of Bidder
... View More
A class electrical license is required to bid or participate in this tender. Specifically, the bidder should possess an "A" Class license.
Bid Capacity
... View More
The Bid capacity required in the given tender to bid is at least Rs 801.60 Lac, calculated using the formula: Bid capacity (C) = (2xA) – B, where A = Maximum Annual Turnover of one year out of last three years, and B = Value of left over existing commitments against various contracts.
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in single, two, and three similar completed works. The values and percentages of similar works completed are as follows:
- Single similar work: not less than 80% of the estimated cost, which is Rs. 641.29 Lac.
- Two similar works: not less than 100% of the estimated cost, which is Rs. 801.60 Lac.
- Three similar works: not less than 120% of the estimated cost, which is Rs. 961.93 Lac.
These experiences should be completed within the last seven years. The bidder is also required to have experience in similar completed works not less than an amount equal to 80%, 100%, and 120% of the estimated cost in the last seven years, with estimated cost values of Rs. 641.29 Lac, Rs. 801.60 Lac, and Rs. 961.93 Lac respectively. Additionally, the bidder should have completed similar works, such as 40% of similar work, for example, if the length of the transmission line/cable under NIT is 10 Km, the bidder must have executed at least three transmission lines/cable of 4 Km length in three different contracts.
Costs
EMD
₹ 8,01,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HPSEB_99741_1Tender No
CEKZ-SI-16/2024-25Tender Authority
Himachal Pradesh State Electricity Board Limited ViewPurchaser Address
-Website
http://www.hpseb.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
33/0.433KV, 100KVA Station Transformer(4 Star Rating Complete in all respect ) (Provided By HPSEBL)
1
-
-
... More
33 kV Switchgear & Allied Equipment: with 02 No., 33 KV incomer
-
-
-
... More
33 kV Control and Relay (CR) Panel (with Numeric Differential Relay, IEC 61850)
2
-
713092.32
... More
33 kV Control and Relay (CR) Panel (33 kV Incomer Bus)[Numeric Relay, IEC 61850]
2
-
638023.06
... More
33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) (Provided By HPSEBL)
4
-
-
... More
33 kV Isolator Moterised (2000 A, 25kA, with Earth Switch) with structure (for 3Φ)
2
-
366256.3
... More
33 kV Isolator (2000 A, 25kA, without Earth Switch) with structure (for 3Φ)
8
-
1029957.6
... More
33 kV LA /Surge Arrester (30 kV, 10KA, Station class,ZnO, Porcelain)
12
-
212754.48
... More
33 kV Current Transformer (33 kV, 1Ö, Multi Ratio Multi Core, Outdoor) (1 No. per Ö)
12
-
576912
... More
33 kV Potential Transformer (33 kV/110 V, 1Ö, Multi- Core, Outdoor), (1No. per Ö)
6
-
208306.44
... More
33 kV Drop Out Fuse Unit (33 kV, Expulsion) (Set Consist of 3 no. unit)
1
-
13069.4
... More
11 kV Switchgear, Bus coupler and Allied equipment: 02 No. incomer Bus
-
-
-
... More
11 kV Incomer bus CR Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] for 2 Nos Incomer (Provided By HPSEBL)
2
-
-
... More
11 kV BUS Coupler Switch Gear Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] for 1 no. Bus Coupler (Provided By HPSEBL)
1
-
-
... More
11 kV out gonong feefer CR Panel with indoor VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] for 5No. Feeder (Provided By HPSEBL)
5
-
-
... More
11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3Φ, Indoor) (Set Consist of 3 no. unit)
2
-
37846.72
... More
11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Polymer, Outdoor)
21
-
128384.13
... More
11 kV Isolator (12 kV, 1250 A, 25 kA, for 3 sec Earth Switch, Outdoor) Moterised
5
-
398950
... More
11 kV Isolator (12 kV, 630A, 25 kA, for 3 sec without Earth Switch, Outdoor)
7
-
93882.53
... More
Power Cables & Termination Kits , LT Cables
-
-
-
... More
11 kV Cable (11 kV, 240 mm², XLPE, Three Core, Armoured) {Transformer to 11 kV Bus} {50m+ Spare-50m}
200
-
329146
... More
11KV Cable Termination Kit (3x 240mmSq outdoor) (Set Consist of 3 no. unit)
2
-
33598.66
... More
11KV Cable Termination Kit (3x240mmSq Indoor) (Set Consist of 3 no. unit)
2
-
33598.66
... More
11KV Cable (11KV, 185mmSq, XLPE. 3 core, armed) bus bar VCB to isolator, 50 meter + spare 50 meter
500
-
674175
... More
11KV Cable Termination Kit (3x185mmSq outdoor) (Set Consist of 3 no. unit)
8
-
125991.44
... More
11KV Cable Termination Kit (185mmSq Indoor) (Set Consist of 3 no. unit)
8
-
125991.44
... More
LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr
100
-
24947
... More
Capacitor Bank as per REC Specifications
-
-
-
... More
Capacitor Bank(3-Phase,50HZ,1200KVAr,IS 2834) Auto switched caoacitor (1587 kVAR at 12.65 kV Vacuum Contractor, 11 kV Dry Type RVT, HRC Fuses, AI Bus Bars, Epoxy Insulator)
1
-
1367540
... More
11 kV Swichgear pannel for Capacitor Bank with complete arrangement, with 9 kV-3 nos, 10 kV LA with Str and foundation Bolt , 1 no. 11 kV Isolator with Earth Switch and Support Strcture Str. Terminal Lugs or allied accessories with Earthing material for earthing of Capacitor Bank panel , isolator Etc
1
-
1044185.47
... More
General Equipment
-
-
-
... More
Battery Bank 30V,200AH
1
-
87633.66
... More
Battery Charger 30V.200 AH with allied accessories
1
-
223581.68
... More
Distribution Panel 30V DC
1
-
86286.32
... More
Distribution Panel (415 V, AC) 200 Amp as incomer MCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5
1
-
516180.7
... More
SCADA & Telecommunication Facilities of leading company in the respective field including design, fabrication, supply , transportation to site, erection, integration, testing and commissioning of RTU based SCADA System for 33/11 kV S/Stn
1
-
3030000
... More
33 kV Super Structure
-
-
-
... More
(i) R.S. Joists, size 12800x250x125 mm 22 supports i.e. (15x12.8x37.3)
22
-
886244.7
... More
(ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer's LA, Station Transformer LA, I/C, Power Transformer's CTs
32
-
422971.84
... More
(iii) Foundation of R.S. Joist supports
22
-
1609172.4
... More
(iv) Foundation of CT, PT & LA
32
-
688706.88
... More
(v) M.S. channel iron 125x65x5.3 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA's transformer etc.
(a) 5.5 Mtr long = 32 No.
(b) 7 Mtr long =20 No. ( c) 4.50 Mtr long = 16 No
= 32x5.5+20x7+4.5x16=388
387
-
427611.78
... More
(v) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer
12
-
5914.56
... More
(vi) Nuts & Bolts with Washers off sizes
100
-
11918
... More
33 kV Bus Bar
-
-
-
... More
(i) 3 Disc insulators Tension String complete with fitting
66
-
171582.84
... More
(ii) ACSR conductor 200 mm²
21x5.5+ 8.4x3 + 18x7 + 4x3.5x21 = 350 mtr + 35 mtr wastage
385
-
65715.65
... More
For jumpers at 2 m average
-
-
-
... More
14 sets I.e. 2x3x14x1.1=92 m
92
-
15703.48
... More
(iii) Tee connections
30
-
8059.8
... More
(iv) PG clamps
75
-
10756.5
... More
Shingles for S/Stn Yard
17
-
38065.89
... More
11 kV Outdoor Gantry for Outgoing Feeder
-
-
-
... More
SUPPORTS
-
-
-
... More
(a) Steel tubular pole 11 m long for 5 No. out going Feeder
10
-
224987.6
... More
(b) RCC muffs & concreting thereof for 5 No. out going Feeder
10
-
16139.8
... More
CROSS ARMS
-
-
-
... More
(a) 4.2 m long M.S. channel iron 100X50X6 mm 9.56 kg/m Cross arms for Sub-Station With 4 No. out going Feeder (11Kv)
85
-
68594.15
... More
(b) M.S. angle iron 50X50X6 mm 4.5 kg/m Cross arms for Sub-
Station With 5 No. out going Feeder
116.3
-
43461.31
... More
(d) M.S. Half clamps
10
-
1717
... More
(e) Full Clamp
40
-
13736
... More
(f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably
16 mm Φ or more (with flat and spring washers)]
50
-
6565
... More
ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase]
60
-
6787.2
... More
Discs insulator sets (comprising 1 No. Disc: ^^(Polymer, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors)
30
-
51752.4
... More
Clamps for 4 Nos. out going Feeder
30
-
5151
... More
EARTHING (33 kV Sub-Station
-
-
-
... More
Material for Earth Mat laying
-
-
-
... More
M.S Flat 50x6 mm for ground mat i/c 5% wastage weighing 2.4 kg/m (27x23=9x5)x1.05=535.5 m or 1285.2 kg 1.28 MT
1.29
-
70025.5
... More
Earthing pipe electrode
16
-
84985.44
... More
20 mm roungd 3 mtr long & weighing 2.47 kg/m 10 no. electrode 10x3x2.47=74.1 kg
74
-
4110.7
... More
Earthing of 33 kV yard & equipment & 22 kV or 11kV panels
M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:-
(a) Transformer Earthing at 3 points for 2 Nos Power Transformer (body & neutral) at 10 Mtr each 2x(3x10)x1.05=63 Mtr
(b) For 4 No. LA's at 4.2 Mtr each 2x4.2x2x1.05=17.64 Mtr
(c) For 22 nos. 33 kV super structure at 11.50 Mtr each
22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr
(d) For 32 Nos. VCB & CT body earthing at 10 m Each
(32x10)x1.05 = 336 Mtr
Total (a+b+c+d) = 682 Mtr
682
-
135697.54
... More
G I wire 6 swg for screening etc.
96
-
3102.72
... More
Eye Block for Screening
15
-
1257.45
... More
Turnbuckle for Screening
8
-
1373.6
... More
Yard Lighting
-
-
-
... More
9 m, Steel Tubular poles for yard lighting
10
-
139339.6
... More
Muff
10
-
16139.8
... More
18Watt LED Lamp with complete Fitting (LED Post top with aluminum inclosure and die cast heat shrink claasic look with symmetrical light distribution and excellent heat disspation for long life Model)
10
-
14453.1
... More
Post Erection for gate
4
-
5062.12
... More
Clamps for GI pipe bracke
20
-
3434
... More
Underground cable 2C 16 mm² for yard lighting
220
-
6221.6
... More
PVC cable size 6 mm² for connecting LED lamp supply
75
-
1136.25
... More
Junction Box i/c MCCB and other Allied Material
10
-
5353
... More
Lighting Emergency (3 No LED Bulbs with holders /wire)
1
-
1169.58
... More
Control and LT Power cables
-
-
-
... More
2x2.5 mm² control cable
303
-
19279.89
... More
4x2.5 mm² control cable
150
-
16968
... More
12x2.5 mm² control cable
63
-
19534.41
... More
3.5 core 95 mm² aluminium cable suitable for 415 V, AC
55
-
16442.8
... More
Terminal Equipment at Khundian and Baroh
-
-
-
... More
33 kV Isolator (2000 A, 25kA, with Earth Switch) with structure (for 3Φ)
4
-
732512.6
... More
ST Pole 13 mtr. Long (W/L200kg)
4
-
147799.36
... More
RCC muff 2000mm length
4
-
6455.92
... More
X-arm ( Channel 100*50*5mm) length 3250 mm
8
-
21177.68
... More
Belt set MS angle iron 65*65*6mm length 1800mm*2No.
4
-
3583.48
... More
X-bracing set MS angle iron 50*50*5mm length 2700mm *2No.
4
-
4076.36
... More
33KV Disc insulator set on dead end str.i/c dead end clamp
24
-
62393.76
... More
33KV Pin insulator
6
-
3745.08
... More
MS nuts and bolts off sizes
16
-
2100.8
... More
Barbed wire
48
-
4654.08
... More
Aluminum paint
8
-
2957.28
... More
Red oxide
8
-
2262.4
... More
full clamp MS Flat 50*6mm
40
-
13736
... More
Transportation
1
-
517717.92
... More
2)33KV Single Circuit (SC) line on double pole structure from Khundian to Lagru
-
-
-
... More
ACSR 6/1/4.72 (100mm²)
25.01
-
2829409.06
... More
Steel Tubular Poles (11 m, Working Load 227 kg)
107
-
2722283.3
... More
Steel Tubular Poles (13 m, Working Load 227 kg)
24
-
886796.16
... More
Muffs with concerete filling
131
-
211431.38
... More
X-Arms: [MS Channel Iron (100x50x6 mm, Length: 3250 mm i/c tolerance 100 mm on either side]
148
-
391787.08
... More
X-Arms: [MS Channel Iron (100x50x6 mm, Length: 1500 mm i/c tolerance 100 mm on either side]
4
-
4843.96
... More
Disc insulator String (Suspension) sets: 3 No. Discs in each string:
^^(Polymer, CT, 12 kV, 90 kN) including dead end clamps etc
270
-
633754.8
... More
Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No.
146
-
214111.92
... More
X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.]
146
-
148787.14
... More
33 kV Pin Insulators (Polymer, 36 kV, 10 kN)
99
-
61793.82
... More
Stay set complete in all respect
188
-
265262.36
... More
Stay Wire (7/4.00 mm) (9.0 kg Per Stay Set)
1692
-
164056.32
... More
HT Earthing set complete
63
-
83164.41
... More
Earth wire (GI, 6 SWG) {Includes Double wire length and Additional 1% (Sag and wastage)}@ 150 kg/km
2460
-
238521.6
... More
Eye Hook for earth wire
138
-
7247.76
... More
Earth Reel
138
-
3484.5
... More
MS Channel Iron: 75x40x6, Length :3300 mm
68
-
136535.84
... More
Half clamps
416
-
71427.2
... More
Full clamps
300
-
103020
... More
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm
Φ or more (with flat and spring washers)]
462
-
60660.6
... More
Barbed wire
393
-
38105.28
... More
Danger Plate (203X200X1.6mm)
37
-
4932.84
... More
Aluminium Paint
262
-
96850.92
... More
Red Oxide
199
-
56277.2
... More
33KV Isolator without earth blade E/Blade, 1250A
1
-
121715.1
... More
Transporation
8.2
-
1396527.4
... More
3)33KV Single Circuit (SC) line on double pole structure from Station Lagru to Baroh
-
-
-
... More
ACSR 6/1/4.72 (100mm²)
40.43
-
4573890.78
... More
Steel Tubular Poles (11 m, Working Load 227 kg)
135
-
3434656.5
... More
Steel Tubular Poles (13 m, Working Load 227 kg)
64
-
2364789.76
... More
Muffs with concerete filling
199
-
321182.02
... More
X-Arms: [MS Channel Iron (100x50x6 mm, Length: 3250 mm i/c tolerance 100 mm on either side]
219
-
579738.99
... More
X-Arms: [MS Channel Iron (100x50x6 mm, Length: 1500 mm i/c tolerance 100 mm on either side]
8
-
9687.92
... More
Disc insulator String (Suspension) sets: 3 No. Discs in each string:
^^(Polymer, CT, 12 kV, 90 kN) including dead end clamps etc
453
-
1063299.72
... More
Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No.
208
-
305036.16
... More
X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.]
208
-
209869.92
... More
33 kV Pin Insulators (Polymer, 36 kV, 10 kN)
174
-
108607.32
... More
Stay set complete in all respect
388
-
512187.16
... More
Stay Wire (7/4.00 mm) (9.0 kg Per Stay Set)
3492
-
338584.32
... More
HT Earthing set complete
98
-
129366.86
... More
Earth wire (GI, 6 SWG) {Includes Double wire length and Additional 1% (Sag and wastage)}@ 150 kg/km
3963
-
384252.48
... More
Eye Hook for earth wire
202
-
10609.04
... More
Earth Reel
202
-
5100.5
... More
MS Channel Iron: 75x40x6, Length :3300 mm
101
-
202795.88
... More
Half clamps
650
-
111605
... More
Full clamps
432
-
148348.8
... More
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm
Φ or more (with flat and spring washers)]
700
-
91910
... More
Barbed wire
597
-
57885.12
... More
Danger Plate (203X200X1.6mm)
58
-
7732.56
... More
Aluminium Paint
368
-
136034.88
... More
Red Oxide
299
-
84557.2
... More
33KV Isolator without earth blade E/Blade, 1250A
2
-
243430.2
... More
Transporation
13.21
-
2249771.59
... More
4.)11 kV Line (4 No. Feeders)
-
-
-
... More
ACSR 6/1/3.35(50mm²) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage}
12.72
-
743326.14
... More
Steel Tubular Poles (11 m, Working Load 227 kgf/m²) (withRuling Span 90 m, 8 No. Run thro' and 3 No. Double Pole Dead End Structures)
57
-
1450188.3
... More
Muffs with concerete filling
57
-
91996.86
... More
Run Thro' Structures (∆ Formation): (Adopt Eight (8) No. Run-through Structures per Km) -on Double Pole Structures
-
-
-
... More
Cross Arm: [Channel Iron (100x50x6 mm), Length: 2340 mm i/c tolerance of 100 mm either side)
20
-
38137.6
... More
Angle Iron (50x50x6 mm), Length: 2125 mm x 2 No.
40
-
32198.8
... More
Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No
21
-
14253.12
... More
11 kV Pin Insulators (Polymer, 12 kV, 10 KN): 3 No per pole structure
60
-
9877.8
... More
Tapping Structure :-
-
-
-
... More
X-Arm: [Channel Iron (75x40x6 mm), Length : 2340 mm X 4 Nos] for supporting DO fuse unit & GO switch
8
-
15255.04
... More
GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mmGO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm
2
-
523.18
... More
D.O Fuse Unit
2
-
4448.04
... More
GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type
2
-
17206.36
... More
Dead End Structures:(Adopt three (3) No. per Km) on Double pole
-
-
-
... More
Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No
36
-
24433.92
... More
X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No.
36
-
28869.84
... More
X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ∆ Formation
36
-
68647.68
... More
Discs insulator sets on Dead End structures (comprising 1 No.Disc: ^^(Polymer, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)
96
-
165607.68
... More
11 kV Pin Insulators (Polymer, 12 kV, 10 kN): 3 No per double pole structure
63
-
10371.69
... More
HT Stay / Guy Arrangement
-
-
-
... More
Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures)
93
-
110555.61
... More
Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)
930
-
90172.8
... More
Earthing
-
-
-
... More
HT Earthing set complete
38
-
50162.66
... More
Double Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m
543
-
52649.28
... More
Eye Hook for earth wire
78
-
4096.56
... More
MS Angle Iron: 50x50x6, Length : 2800 mm
65
-
68669.9
... More
Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]
124
-
21290.8
... More
Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]
122
-
41894.8
... More
Danger Plate (250X200X1.6 mm)
32
-
4266.24
... More
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
110
-
14443
... More
Barbed Wire
286
-
27730.56
... More
Red Oxide
141
-
39874.8
... More
Aluminium Paint
93.5
-
34563.21
... More
Transportation
1
-
115345.04
... More
B) Errection Part
-
-
-
... More
1) 2x1.6 MVA 33/11 kV Sub-Statione
-
-
-
... More
Laying of earth mat, earthing rod & pipes
1
-
260658.58
... More
Erection of super structure & busbar
-
-
-
... More
Erection of cross arms
68
-
115890.36
... More
Erection of T-set
30
-
45765
... More
Erection of Jumper sets
84
-
128142
... More
Erection of set of bus bar
12
-
47338.32
... More
Installation of equipment
-
-
-
... More
Isolators
23
-
359089.34
... More
Lightening Arresters
10
-
19188
... More
PT's
6
-
19521.66
... More
D.O. fuse unit
3
-
11870.34
... More
Circuit breaker (VCB) with CT
4
-
187017.24
... More
Station Transformer
1
-
47707.75
... More
Power Transformer
2
-
254353.96
... More
11 kV incoming panel with CT, PT's and breaker
3
-
78050.97
... More
11 kV Outgoing panel
5
-
117034.75
... More
Laying of control cables set (for 50 M)
6
-
120848.52
... More
Laying of power cables set (for 50 M)
3
-
40437.78
... More
Connecting the power cable to Heat Shirinkable Terminal Kit
20
-
89385
... More
Installation of Sub-Station auxiliaries
2
-
138677.84
... More
Erection of yard lighting
1
-
23025.58
... More
Erection of fencing
132
-
84510.36
... More
Erection 11 kV Outdoor Gantry for 5 No. Outgoing Feeder
-
-
-
... More
Erection of 11 Mtr S/T Pole Double Structure
5
-
61919.95
... More
Erection of Earthing Set
5
-
26457.95
... More
Fixing of Jumpers, Isolator, Disc. Insulator and LA etc
5
-
29795
... More
2) 33KV Single Circuit (SC) line on double pole structure from Khundian to Lagru
-
-
-
... More
Erection charges of steel tubular pole structure (11 to 13 mtr ) RunThrough Str.
-
-
-
... More
Erection charges of steel tubular pole run thruh along with erection of muff and painting of pole
37
-
565759.23
... More
Earthing of Line at every structure
37
-
200639.53
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
74
-
183441.56
... More
Stringing of Earth wire (GI No. 6 SWG)
8.28
-
92365.47
... More
Stringing of ACSR Conductor (6/1/4.72 mm or 6/1/4.09
4.37
-
223899.05
... More
Erection charges of steel tubular pole structure (11 to 13 mtr ) Dead End str.
-
-
-
... More
Erection charges of steel tubular pole run thruh along with erection of muff and painting of pole
9
-
153277.38
... More
Earthing of Line at every structure
9
-
48804.21
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
36
-
89241.84
... More
Stringing of ACSR Conductor (6/1/4.72 mm or 6/1/4.09
3.91
-
200330.73
... More
Fixing of jumper for 33KV Line
9
-
10082.61
... More
Erection charges of steel tubular pole Tripple no structure (11 to 13 mtr ) Dead End str.
-
-
-
... More
Erection charges of triple pole structure (1.5 times of the double pole dead end structure )along with erection of muff , painting of poles, fixing of cross arm of triple pole dead end structure, 6 no string insulator, 6 no. 33 kv pin insulator and dead end clamp etc.
5
-
127731.15
... More
Earthing of Line at every structure
5
-
27113.45
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
30
-
74368.2
... More
Fixing of jumper for 33KV Line
30
-
33608.7
... More
Erection charges of 33 KV Isolator structure (11 to 13 mtr )
-
-
-
... More
Erection charges of Isolator pole structure (1.5 times of the double pole dead end structure )along with erection of muff , painting of poles, fixing of cross arm of triple pole dead end structure, 6 no string insulator, 6 no. 33 kv pin insulator and dead end clamp etc.
2
-
51092.46
... More
Digging of pit
2
-
10845.38
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
6
-
14873.64
... More
Fixing of jumper for 33KV Line
6
-
6721.74
... More
Erection charges of Road crossing str. (13 mtr )
-
-
-
... More
Erection charges of steel tubular pole 13 mtr. Long dead end along with erection of muff and painting of pole
11
-
187339.02
... More
Earthing of Line at every structure
11
-
59649.59
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
42
-
104115.48
... More
Fixing of jumper for 33KV Line
33
-
36969.57
... More
3)33KV Single Circuit (SC) line on double pole structure from Station Lagru from Baroh
-
-
-
... More
Erection charges of steel tubular pole structure (11 to 13 mtr ) RunThrough Str.
-
-
-
... More
Erection charges of steel tubular pole run thruh along with erection of muff and painting of pole
45
-
688085.55
... More
Earthing of Line at every structure
45
-
244021.05
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
90
-
223104.6
... More
Stringing of Earth wire (GI No. 6 SWG)
13.34
-
148811.04
... More
Stringing of ACSR Conductor (6/1/4.72 mm or 6/1/4.09
5.47
-
280258.08
... More
Erection charges of steel tubular pole structure (11 to 13 mtr ) Dead End str.
-
-
-
... More
Erection charges of steel tubular pole run thruh along with erection of muff and painting of pole
18
-
306554.76
... More
Earthing of Line at every structure
18
-
97608.42
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
96
-
237978.24
... More
Stringing of ACSR Conductor (6/1/4.72 mm or 6/1/4.09
7.87
-
403223.23
... More
Fixing of jumper for 33KV Line
18
-
20165.22
... More
Erection charges of steel tubular pole Tripple no structure (11 to 13 mtr ) Dead End str.
-
-
-
... More
Erection charges of triple pole structure (1.5 times of the double pole dead end structure )along with erection of muff , painting of poles, fixing of cross arm of triple pole dead end structure, 6 no string insulator, 6 no. 33 kv pin insulator and dead end clamp etc.
3
-
76638.69
... More
Earthing of Line at every structure
3
-
16268.07
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
18
-
44620.92
... More
Fixing of jumper for 33KV Line
15
-
16804.35
... More
Erection charges of 33 KV Isolator structure (11 to 13 mtr )
-
-
-
... More
Erection charges of Isolator pole structure (1.5 times of the double pole dead end structure )along with erection of muff , painting of poles, fixing of cross arm of triple pole dead end structure, 6 no string insulator, 6 no. 33 kv pin insulator and dead end clamp etc.
2
-
51092.46
... More
Digging of pit
2
-
10845.38
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
6
-
14873.64
... More
Fixing of jumper for 33KV Line
6
-
6721.74
... More
Erection charges of Road crossing str. (13 mtr )
-
-
-
... More
Erection charges of steel tubular pole 13 mtr. Long dead end along with erection of muff and painting of pole
30
-
510924.6
... More
Earthing of Line at every structure
30
-
162680.7
... More
STAY SET COMPLETE:- Per structure for Run thru' (Formation Δ=1 No / H = 2 Nos / V =4 Nos); Per structure for Dead End (4 Nos)
178
-
441251.32
... More
Fixing of jumper for 33KV Line
90
-
100826.1
... More
4.)11 kV Line (4 No. Feeders)
-
-
-
... More
Erection of S/T pole Single pole str. ( 11Mtr. Long)
-
-
-
... More
Erection of Single Pole
19
-
113560.72
... More
Erection of Double Pole
19
-
247795.53
... More
Erection Earthing
38
-
66483.28
... More
Erection of Stay Set
95
-
218403.1
... More
Fixing of jumper for 11KV Line
57
-
14061.9
... More
Erection GI Earth Wire
8.06
-
40152.66
... More
Laying ,Stringing and sagging of ACSR ACSR 6/1/3.35 mm
4.2
-
207830.87
... More
C) Civil Part
-
-
-
... More
Control Room Building excluding Sub-Division Building for 33/11KV Sub-Station lagru Under ED Khundian
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
190.75
-
33827.61
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
13.12
-
71835.02
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
143.46
-
32127.87
... More
Suspended floors, roofs, landings, balconies and access platform
279.74
-
135539.62
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
319.77
-
128087.07
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
138.17
-
73586.58
... More
Stairs, (excluding landings) except spiralstaircases
11.39
-
5237.01
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
74.33
-
10112.6
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
27.58
-
189931.88
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
17.52
-
138365.43
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
81.4
-
659920.38
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
15180
-
1206961.8
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
40.36
-
52082.56
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
45.05
-
230963.24
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
30.85
-
169466.15
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
45.51
-
290239.11
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
140.34
-
108558.6
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
802.41
-
349056.37
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
1089.51
-
543785.34
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
37.41
-
43725.93
... More
Providing and fixing aluminium work for doors, windows, board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in- charge. Pre-laminated particle board with decorative lamination on both sides
8.81
-
8652.04
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading
27.97
-
18591.66
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment).
99.8
-
49821.16
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
2
-
4743.18
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
6
-
1487.4
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
16
-
1416.96
... More
100x10 mm
172
-
9850.44
... More
Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
88
-
5239.52
... More
100 mm
12
-
630.12
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
8
-
504.88
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150 mm
37
-
2204.83
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
6
-
5030.52
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)
29.12
-
4891.29
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
174.45
-
219423.21
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
24.38
-
32285.95
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
18.05
-
17714.27
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1302.88
-
144841.17
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
407.18
-
52029.46
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
5.2
-
33647.64
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover
10.5
-
27859.34
... More
Providing and fixing ball bearing for rolling shutters.
2
-
868.78
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
10.5
-
12021.14
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
521.79
-
76849.23
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
724.33
-
138940.98
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1246.12
-
109720.87
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer.
1047.62
-
104971.52
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
198.5
-
22601.21
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
69.67
-
5939.37
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
73.5
-
36414.11
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors herever required : W.C. pan with ISI marked white solid plastic seat and lid
1
-
4480.17
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
-
307.86
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
1
-
2411.27
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
-
1469.34
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern
1
-
4024
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
2
-
206.4
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Waste fittings complete. Flexible pipe 32 mm dia
2
-
209.2
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
3
-
257.61
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
1
-
911.62
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
1
-
236.1
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
1
-
135.02
... More
Providing and fixing toilet paper holder : C.P. brass
1
-
496.37
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
2
-
1142.96
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
1
-
627.25
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
3
-
1651.29
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
(a) 15 mm nominal bore
2
-
700.86
... More
(b) 25 mm nominal bore
1
-
407.65
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729
4
-
3886.48
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
4
-
156.84
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
... More
(i) 15 mm nominal bore
90
-
20997.9
... More
(ii) 25 mm nominal bore
30
-
11346.3
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
85.8
-
23129.11
... More
75 mm diameter
60
-
10252.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°
-
-
-
... More
110 mm diameter
16
-
2149.6
... More
75 mm diameter
8
-
744.08
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
1
-
305.37
... More
Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
3
-
3998.28
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
19837.14
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore
1
-
350.43
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
1000 liters net capacity tank
1000
-
9100
... More
Electrical Installaions to Control Room Building
-
-
-
... More
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. 209 Group C.
33
-
31309.08
... More
213 Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
140
-
23755.2
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 217 2x2.5 Sq. mm.
80
-
15312.8
... More
214 Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
120
-
27189.6
... More
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 602 25 mm. dia
110
-
7284.2
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
-
-
-
... More
216 2x1.5 Sq. mm.
180
-
30542.4
... More
217 2x2.5 Sq. mm.
130
-
24883.3
... More
218 2x4.0 Sq. mm.
85
-
19259.3
... More
219 2x6.0 Sq. mm.
65
-
20040.8
... More
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-
-
-
-
... More
806 2 modules (78mmx78mmx50mm)
2
-
420.06
... More
807 4 modules(140mmx78mmx50mm)
6
-
1378.14
... More
808 6 modules(205mmx78mmx50mm)
3
-
831.84
... More
809 8 modules (120mmx135mmx60mm)
2
-
658.02
... More
810 12 modules (205mmx135mmx60mm)
6
-
2290.68
... More
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
-
-
-
... More
909 S.P. 5/ 6 Amps one way Modular switch.
39
-
2582.58
... More
911 Bell push, Modular.
1
-
108.64
... More
912 S.P. 15/ 16 Amps one way Modular switch.
6
-
689.04
... More
914 6 pin,15/16 Amps Modular socket outlet.
6
-
955.98
... More
913 5 pin, 5/ 6 Amps Modular socket outlet.
10
-
1055.3
... More
929 Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.
14
-
651.84
... More
936 Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-
1
-
80.7
... More
933 Supplying and fixing bakelite batten/angle holder including connections etc. as required:-
11
-
1012.88
... More
2613 Providing and fixing following surface mounting T5 luminaries with powder coated CRCA sheet steel housing, mirror optics reflector, electronic ballast, decorative end caps, suitable for 28 watt FTL (T5), complete with all accessories (excluding the T-5 Tube), connections, testing and commissioning etc. as required. 2 x28 watt-FTL(T5) (Category-A)
6
-
34105.68
... More
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- 2502 Ceiling Fan 1400 mm sweep, Category-A
6
-
14154.36
... More
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- 2505 Exhaust Fan, Heavy duty, 300 mm sweep
3
-
11027.82
... More
2711 Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Bulk head fitting, CFL type (Category-A)
6
-
3270.96
... More
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset,neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including Earthing etc. as required:- 1809 Double door-12 way
1
-
1989.6
... More
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- 1701 Single pole. Cat-A.
10
-
1779.6
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1718 63 Amps. Cat-A.
1
-
369.36
... More
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1730 63 Amps. Cat-A.
1
-
2695.22
... More
1901 Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.( but without charcoal or coke and salt ) complete as required.
1
-
4688.96
... More
1902 Extra for using salt and charcoal for pipe earth electrode complete as required.
1
-
1280.06
... More
1909 Supplying and laying 6 SWG G.I. wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.
95
-
3046.65
... More
C/O Septic tank and soak pit
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
28.19
-
6855.04
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
2.58
-
14458.39
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)
1.01
-
6643.32
... More
Brick work with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse
sand
6.08
-
28977.87
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in
7.2
-
4886.06
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
33.99
-
6520.35
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies
and access platform
10
-
4845.2
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
1.4
-
11374.3
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level nThermo-Mechanically Treated bars of grade
Fe-500D or more
168.38
-
13387.81
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
-
4480.17
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
1
-
4110.14
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
-
307.86
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:-Flexible pipe 40mm
1
-
104.6
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
1
-
1044.88
... More
Providing and fixing heel rest sanitary bend 100mm cast iron as per IS - 3989
2
-
894.34
... More
Providing and fixing plain bend of required degree.100 mm Sand cast iron S&S as per IS : 3989
4
-
1617.12
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc For 100 mm dia pipe
18
-
3448.08
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
6
-
720.72
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge 15mm nominal size
1
-
6325.34
... More
Providing and fixing soil, waste and vent pipes : 100mm dia Sand cast iron S&S pipe as per IS: 1729
30
-
30411.9
... More
Providing and fixing collar :100mm diaSand cast iron S&S as per IS - 3989
8
-
3389.04
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
1
-
429.53
... More
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
1
-
519.49
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15mm dia
700
-
140791
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm dia
3
-
1300.38
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
5
-
3136.25
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
6
-
3302.58
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge
15
-
950.55
... More
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
3
-
15169.23
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design
1
-
2364.09
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore
14
-
2350.88
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
-
9100
... More
Providing and fixing PTMT grating of approved quality and colour 100mm nominal dia
1
-
39.21
... More
C/O RCC Foundation for 33 KV Circuit Breaker
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
24.68
-
4376.75
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
1.11
-
6077.51
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
27.6
-
6181.02
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
8.65
-
59568.92
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
605.5
-
47235.06
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
3.6
-
746.6
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
3.6
-
227.95
... More
Foundation for station transformer
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3.56
-
631.33
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
0.18
-
985.54
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
13.08
-
2929.27
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
4.28
-
29474.56
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
299.6
-
23371.8
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
5.2
-
1078.43
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
5.2
-
329.26
... More
Foundation for RS Joist
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
95.55
-
16944.84
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
3.68
-
20148.85
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
87.6
-
19618.02
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
19.52
-
134426.04
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
1366.4
-
106592.86
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
8.1
-
1679.86
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
8.1
-
512.89
... More
C/O RCC Foundation for CT and PT
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
54.83
-
9723.55
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
2.46
-
13474.97
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
64.08
-
14356.48
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
16.67
-
114849.63
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
1166.9
-
91076.55
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
8.64
-
1792.63
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
8.64
-
547.34
... More
C/O Outdoor and Indoor Cable trenchs
-
-
-
... More
Eathwork in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock
170.78
-
41531.99
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
11.14
-
62525.81
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
635
-
142208.25
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)
72.15
-
475983.65
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
8658
-
688397.58
... More
20 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
301
-
75177.76
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3113.33
-
279110.03
... More
Providing chequered plate 6mm thick covers including cutting,hoisting & placing in position including priming coat & painting & making holes complete.
5274
-
532674
... More
C/O Oil Sump
-
-
-
... More
Eathwork in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock
10.23
-
2488.56
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
0.33
-
1840.98
... More
Centering and shuttering including strutting, propping etc. and removal of form for : columns, Pillars, Piers, Posts and Struts etc
36.7
-
19544.62
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)
4.34
-
28638.18
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
285.52
-
22701.3
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm
20
-
3417.4
... More
C/O Rain Water Harvesting Tank
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
35.15
-
6233.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
0.95
-
5201.47
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
58.33
-
28262.05
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide metre
13.2
-
1795.86
... More
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 110 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 Providing weep holes in plain retaining/reinforcement/Breast wall with 110mm dia. PVC pipe
20
-
4511.8
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
711.1
-
55472.91
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
7.42
-
51098.42
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
2.72
-
2104.03
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
4.74
-
983.03
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required
thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1.28
-
1651.78
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water/soil waste/vent pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
60
-
10252.2
... More
110 mm diameter
60
-
16174.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water/soil waste/vent pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler 75mm Dia
12
-
966.6
... More
Coupler 110mm Dia
12
-
1462.56
... More
Bend 87.5° 75mm Dia
5
-
465.05
... More
Bend 87.5° 110 mm Dia
5
-
671.75
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse
sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete
slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary
excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal
size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a
floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non
modular) bricks of class designation 7.5
1
-
1349.84
... More
Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
1
-
1332.76
... More
Foundation and Plinth for transformer
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
40.68
-
12212.14
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
4.02
-
22010.42
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
43.15
-
9663.44
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
59.37
-
25255.4
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
26.58
-
183045.3
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
3.47
-
27404.57
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
859.55
-
68342.82
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
985.44
-
109551.36
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm.
11.6
-
2246.69
... More
Supplying, filling, spreading & leveling gravels of approved size in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
1.36
-
1755.01
... More
D) Site development
-
-
-
... More
Retaining & Breast wall
-
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
2500
-
18625
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
1250
-
221675
... More
laying sand and gravel in yard
-
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil
159.47
-
8785.2
... More
Spraying of anti-weed medicine on dressed ground as per direction of engineer in charge
708.75
-
10631.25
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required
thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.
53.16
-
68600.32
... More
Providing and laying of 40mm/20mm well graded aggreagtes in Sub Station Yard
106.31
-
147618.88
... More
Drain & Boundary Wall
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
170.16
-
30176.17
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8(1 Cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size)
31.82
-
163135.41
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)
27.57
-
151448.35
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)
110.29
-
703372.27
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
293.92
-
156535.91
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 20 mm nominal size)
68.84
-
444018.69
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
267.52
-
29740.2
... More
15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand).
1040
-
199492.8
... More
Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied @ 3.84 kg/10 sqm)
1040
-
65852.8
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
10.56
-
900.24
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire.
1404.6
-
23175.9
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
2100
-
587517
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve hard steel wires
1869.68
-
148658.26
... More
Yard Fencing and soil testing, contour plan & Design
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan), including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m. All
kinds of soil.
8.75
-
2626.15
... More
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal
1.46
-
7474.9
... More
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse
sand): 3 graded stone aggregate 20 mm nominal size)
7.29
-
50203.17
... More
Steel work welded in built up sections,trusses and framed work,including
cutting ,hoisting ,fixing in position and applying a priming coat of red lead
paint. In single Stanchions composed of rolled steel joists or channels with
caps,bases splices,angles brackets etc
1059.78
-
117815.74
... More
Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,
bolts and washers as required complete as per the direction of Engineer-incharge.
Made of G.I. wire of dia 4 mm
259.2
-
176621.47
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. complete :100x58x1.90 mm
3
-
89.25
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts
and screws etc. complete :250x16 mm
1
-
165.33
... More
Soil Testing & Contour Plan and Design
1
-
40000
... More
Gate
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
2.7
-
478.82
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)
0.45
-
2181.62
... More
1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
1.54
-
9487.28
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
6.75
-
1511.66
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
423.7
-
37984.71
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
1.51
-
9971.98
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
12.15
-
2519.79
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
12.15
-
769.34
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
40.5
-
3452.63
... More
Construction of cement concrete road
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
115.5
-
20482.77
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm
77
-
99364.65
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
38.5
-
210796.36
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and uttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm ominal
size)
38.5
-
253989.89
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns,etc. for mass concrete
42
-
17866.38
... More
O&M of 33 KV unmanned sub-station Lagru Under ED Jawalamukhi
-
-
-
... More
wages for 1 Nos. Skilled Workers [(SSA)/Electrician] for for 356 days (Per Year 1 Job) {i/c Minimum Wages Rate notified by HP Govt. on yearly Basis + EPF/Employee Share +EDLI+ESI+ Service & Admin Charges+Good & Service Tax (GST)}
5
-
1267882.05
... More
wages for 3 Nos. Skilled Workers (Helper) for 356 days (Per Year 1 Job) {i/c Minimum Wages Rate notified by HP Govt. on yearly Basis + EPF/Employee Share + EDLI+ESI+ Service & Admin Charges+Good & Service Tax (GST)}
5
-
1081349.3
... More
1) Material is available in HPSEBL Store, if any, will be provided by the HPSEBL. 2) The Successful Bidder will have to submit the Item wise Breakup of Erection Part aof the Matrial.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%