Himachal Pradesh State Electricity Board Limited Tender

Aluminium Thimble of various sizes

LT Switched Capacitor (36KVAr for 100 KVA Transformer (for 11/0.4KV Sub-Station.)

LT Cable (3.5 Core) 185 mm² , PVC (1.1KV,3½Core, Aluminium, Unarmoured) .

LT LINE : AAAC 7/3.15mm (50mm²) conductor {Includes 3 conductor lengths for 3Φ and additional 1% (Sag, Jumpering and wastage} .

9Mtr Long ISI marked Swaged Steel Tubular Pole as per IS 2713/1980 (Part-A) as ammended time to time a/w cap welded on top and Cast Iron Base Plate of designation 410-SP-32.

RCC Muff 2000 mm long with concrete filling material

MS CI X Arm (75x40x6) 600mm

Spool Tie

PVC Spacer

Shackle Insulator (16 kN)

D-Iron (U- Clamps)made of MS Flat 50x6mm.

LT Stay Set Complete i/c Guy Assembly and Helically fittings)

Stay wire 7/3.15 mm (7.00 kg. per stay set)

Stay Clamp / Full Clamp made of M.S. Flat of size (50 x 6mm).

LT Earthing Set complete

M./S Nuts & Bolts of various sizes (Galvanised / Coated) [Preferably 16mm² or more (with flat and spring washers)].

Megger / Insulation Tester (5000 Volts) (Hand Operated)

Aluminium Paint

Erection of 11/0.4KV, 100 KVA Sub-Station Structure using Steel Tubular Poles a/w RCC Muff & its concrete filling as per latest standard practices /specification of REC / HPSEBL including digging of pits, erection of Poles & Muffs, Filling muffs with PCC mixture, re-filling of pit & ramming, drilling of holes in Cross X Arms, Preparation of Plateform Structure Members MS Channel X Arms and Knee Bracing Sets, Erection of Plateform, fixing of M.S. Cross Arms S/Stn fitting, Painting of Complete structure with red oxide paint & then alluminium paint, fixing of GO Switch, DO fuse units, Lightening Arrestors, Disc Insulators, Pin Insulators, LT Ditribution Panel, Energy Meter. Erection of S/Stn. Pipe Earthing Set (3Nos.) complete in all respect including providing Char Coal, Salt etc., Erection of Transformer, Providing Earthing Connection to GO Switch, Transformer Lighteneing Arrestor etc. Erection of Stay Sets (2 Nos.), Erection of LT Cable and fixing of jumpers. Testing and commissioning of Transformer and allied equipments complete in all respect.

ERECTION OF LT LINE : Erection of LT Pole structure with Steel Tubular Pole 9Mtr. Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for pole, muffing of pole, erection of poles, refilling of pit & ramming , drilling of holes in pole and X-arm, fixing of X-arm, Shackle Insulators and painting of structure with Redoxide Primer & Aluminium Paint etc.Complete in all respect as per the standard practices / specifications of the REC /HPSEBL.

Erection of Stay Set (LT) as per latest standard practices /specification of REC / HPSEBLincluding digging of pit (size0.9*1.20*1.33),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect.

Erection of LT Earthing as per latest standard practices /specification of REC / HPSEBL including digging of pit fixing of LT Earth Set, refilling the same and prov. earthing connection completein all respect.

Laying of Conductor, Stringing, Sagging of AAAC, 50mm² mm² and binding with Insulators (4 wires) and fixing of jumper.

Laying of Earth wire with GI Wire 8SWG , Stringing, Sagging of and binding with Insulators.

Add Transportation charges for the carriage material of by road for complete job. (2 trips of vehicle)

Labour cess @1% on (Material Cost +Erection + Transportation+ GST + Testing & Commisioning Charges) etc.