Himachal Pradesh State Electricity Board Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh State Electricity Board Limited - HPSEBL Tender
Eprocure
Opening Date2 Dec 2024
Closing Date12 Dec 2024
Tender Amount₹ 39,64,245
Costs
EMD
₹ 39,642Document Cost
₹ 1,120Tender Fee
Refer Documents
Summary
Tender For Providing Sop To Itbp Babeli By Providing 630kva Dtr At Babeli And 100 Kva Dtr At Bandrol In E Section Babeli Under Esd No Ii Hpsebl Kullu
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPSEB_96077_1Bid Award Id
ViewTender No
HPSEBL/OCK/NIT-03/2024-25Tender Authority
Himachal Pradesh State Electricity Board Limited ViewPurchaser Address
-Website
http://www.hpseb.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Standard bid Document volume 3 for NIT-3
Standard bid Document volume 1for NIT-3
Standard bid Document volume 2 for NIT-3
BOQ Items
... More
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines. (Supplied by the HPSEBL ) (Qty = 2 Set )
-
-
-
... More
Poles & Conductor/cable :-
-
-
-
... More
Supply of 10.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-47
16
23660
378560
... More
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.
16
1630
26080
... More
Supply of AB cable of size 3x120+95 sq.mm
846
1063
899298
... More
Supply of Anchoring assembly fo HT
18
373
6714
... More
Supply of Suspension assembly fo HT
18
295
5310
... More
Supply of cable Termination kit
8
8281
66248
... More
Supply of heat shinkable straight through jointing kit
2
5916
11832
... More
Supply of MVT Connector
9
663
5967
... More
Insulators:-
-
-
-
... More
Supply of 11 kV Pin Insulator Brown Glazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm . (Supplied by the HPSEBL ) (Qty = 6 No. )
-
-
-
... More
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm .(Supplied by the HPSEBL ) (Qty = 6 Set )
-
-
-
... More
Fittings and accessories :-
-
-
-
... More
Stay Sets:-
-
-
-
... More
Supply of Stay Set Suitable for 11KV & DTR made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. (Supplied by the HPSEBL ) (Qty = 19 set )
-
-
-
... More
Stay Wire:-
-
-
-
... More
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Supplied by the HPSEBL ) (Qty = 190 kg )
-
-
-
... More
EARTHING:-
-
-
-
... More
Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
7
1333
9331
... More
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, clamps, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 13.10 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm Long for taping (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
2340 mm long
2
1926
3852
... More
600 mm long
10
494
4940
... More
Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2125 mm long forx-bracing set
4
810
3240
... More
1800 mm long knee bracing
4
685
2740
... More
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm for G.O. Switch & D.O. fuse unit (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
24
133
3192
... More
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV (Supplied by the HPSEBL ) (Qty = 16 No. )
-
-
-
... More
Supply of Half Clamp (MS Flat 50x6mm)
18
173
3114
... More
Supply of Full Clamp (MS Flat 50x6mm)
14
347
4858
... More
Supply of Aluminium Paint for all poles and steel fitting
16
373
5968
... More
Supply of façade hook
26
103
2678
... More
Distribution Trasformer :-
-
-
-
... More
Equipments and switchgear (100 KVA DTR ) :-
-
-
-
... More
Supply including Design, engineering, manufacture, assembly, inspection, testing and delivery of ISI marked, non-sealed, oil immersed, ONAN type, 50 Hz. double wound, 3-phase- 11/0.433KV, 100KVA, outdoor type distribution transformers, for use in power distribution system.
1
174612
174612
... More
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines. (Supplied by the HPSEBL ) (Qty = 1 set )
-
-
-
... More
Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
1
2246
2246
... More
Supply of 9kV, 10 kA Porcelain Station Surge Arresters complete with accessories for 11KV system
3
1260
3780
... More
Supply of LT Distribution Panel Box suitable for 100 KVA S/Stn of size 900x800x200 5mm +/- 5% made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated painted complete with MCCB Rating 250Amp, 3 Poles (1) Type variable trip free, (2) Breaking capacity- Isu & LCS at 415, 50 Hz (KA: not less than 35 KA) (3) , Thermal release range: 150 Amp (4) Mecanical life (operation) 25000 No. (5) Electrical life (operation) 7000 No. (6) Rated insulation voltage (V) 690V (7) Tripping thermal releasing setting : Thermal-O/L Fixed setting (8) Tripping magnetic releasing setting : Magnetic- S/C fixed setting (9) in (10) (Operation) volatge 415V, AC (10) Caliberation temperature: 50 degree C (11) High voltage withstand voltage : 3KV Confirming to IS : 1993/60947-2, 1989 (12) Make L&T/ Havells/ABB/ Schiender -2 nos. or equivalent make.
1
20380
20380
... More
Poles & Conductor/cable :-
-
-
-
... More
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-II) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32.
2
17027
34054
... More
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.
2
1630
3260
... More
Supply of LT cable (3.5 core) 120 mmsq.
30
484
14520
... More
Insulators:-
-
-
-
... More
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm (Supplied by the HPSEBL ) (Qty = 3 set )
-
-
-
... More
Fittings and accessories :-
-
-
-
... More
Stay Sets:-
-
-
-
... More
Supply of Stay Set Suitable for 11KV & DTR made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. (Supplied by the HPSEBL ) (Qty = 3 set )
-
-
-
... More
Stay Wire:-
-
-
-
... More
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Supplied by the HPSEBL ) (Qty = 21 kg )
-
-
-
... More
EARTHING:-
-
-
-
... More
Supply of Earthing set suitable for Metering point/ Substations made of GI pipe 38 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 3000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. Bottom end of the pipe shall be weilded with MS Plate of Size 300x300x6mm.
3
1559
4677
... More
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, clamps, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 13.10 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm long (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
460 mm for supporting main channel of Transformer
2
378
756
... More
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm for G.O. Switch and D.O. Fuse Unit (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
460 mm for GO switch handle supporting
1
264
264
... More
Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm for supporting LA, LT Distribution Box & knee bracing
5
1067
5335
... More
950 mm long for x-arm for bed knee bracing
2
362
724
... More
450 mm long
1
169
169
... More
Supply & Erection of MS Angle Iron 35x35x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 35x35x6 mm, suitable for fixing on 11kV Steel double pole structure with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 2.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
460 mm long
2
119
238
... More
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
27
133
3591
... More
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV (Supplied by the HPSEBL ) (Qty = 1No. )
-
-
-
... More
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
15
98
1470
... More
Supply of Half Clamp (MS Flat 50x6mm)
17
173
2941
... More
Supply of Full Clamp (MS Flat 50x6mm)
9
347
3123
... More
Supply of Aluminium Thimbles suitable for LT cable (Supplied by the HPSEBL ) (Qty = 16 No. )
-
-
-
... More
Supply of Copper Thimbles suitable for LT cable (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
Supply of Aluminium Paint for all poles and steel fitting
4
373
1492
... More
Suuply of capacitor Bank 415 V for 100 KVA DTR (36KVAr )
36
822
29592
... More
Suuply of Energy meter ( 3-pahse , 4 wire )DLMS complaint 200/5 A type for 100KVA DTR
1
15652
15652
... More
Equipments and switchgear (630 KVA DTR ) :-
-
-
-
... More
Supply including Design, engineering, manufacture, inspection, testing and delivery of 33/0.433 KV, 630 KVA, 3-Phase, Oil immersed, Copper wound, Outdoor, type transformer suitable for 50 Hz supply, Delta/Star connection for primary & secondary winding having Vector Group (Supplied by the HPSEBL ) (Qty = 1No. )
-
-
-
... More
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines. (Supplied by the HPSEBL ) (Qty = 1 set )
-
-
-
... More
Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
1
2246
2246
... More
Supply of 9kV, 10 kA Porcelain Station Surge Arresters complete with accessories for 11KV system
3
1260
3780
... More
Supply of LT Distribution Panel for 33/0.4 kv, 630 kVA transformer comprising of incomming ACB TPFM 1000 Amp. & 3 Nos. outgoing MCCB TP 630 Amp. With Aluminium Bus Bar 1200 Amp. having provision for Bus coupling with other Bus coupler for parallel operation
1
222770
222770
... More
Poles & Conductor/cable :-
-
-
-
... More
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-II) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32.
2
17027
34054
... More
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.
2
1630
3260
... More
Supply of LT Cable (3.5 Core ) 400 mm sq x2 incommer including aluminium thimbles both sides (Supplied by the HPSEBL ) (Qty = 30 mtr )
-
-
-
... More
Supply of LT Cable (3.5 Core ) 120 mm sq x2 incommer including aluminium thimbles both sides
90
470
42300
... More
Insulators:-
-
-
-
... More
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm (Supplied by the HPSEBL ) (Qty = 3 set )
-
-
-
... More
Fittings and accessories :-
-
-
-
... More
Stay Sets:-
-
-
-
... More
Supply of Stay Set Suitable for 11KV & DTR made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. (Supplied by the HPSEBL ) (Qty = 3 set )
-
-
-
... More
Stay Wire:-
-
-
-
... More
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Supplied by the HPSEBL ) (Qty = 21 kg )
-
-
-
... More
EARTHING:-
-
-
-
... More
Supply of Earthing set suitable for Metering point/ Substations made of GI pipe 38 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 3000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. Bottom end of the pipe shall be weilded with MS Plate of Size 300x300x6mm.
3
1559
4677
... More
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, clamps, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 13.10 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm long (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
460 mm for supporting main channel of Transformer
2
378
756
... More
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm for G.O. Switch and D.O. Fuse Unit (Supplied by the HPSEBL ) (Qty = 4 No. )
-
-
-
... More
460 mm for GO switch handle supporting
1
264
264
... More
Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
2800 mm for supporting LA, LT Distribution Box & knee bracing
5
1067
5335
... More
950 mm long for x-arm for bed knee bracing
2
362
724
... More
450 mm long
1
169
169
... More
Supply of MS Angle Iron 35x35x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 35x35x6 mm, suitable for fixing on 11kV Steel double pole structure with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 2.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
... More
460 mm long
2
119
238
... More
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
27
133
3591
... More
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV (Supplied by the HPSEBL ) (Qty = 1 No. )
-
-
-
... More
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
15
98
1470
... More
Supply of Half Clamp (MS Flat 50x6mm)
17
173
2941
... More
Supply of Full Clamp (MS Flat 50x6mm)
9
347
3123
... More
Supply of Aluminium Thimbles suitable for LT cable (Supplied by the HPSEBL ) (Qty = 16 No. )
-
-
-
... More
Supply of Copper Thimbles suitable for LT cable
4
481
1924
... More
Supply of Aluminium Paint for all poles and steel fitting
4
373
1492
... More
Suuply of capacitor Bank 216 kVAr for 630 KVA DTR (rate per KVAr )
216
822
177552
... More
Suuply of Energy meter ( 3-pahse , 4 wire )DLMS complaint 1000/5 A type for 630 KVA DTR
1
18177
18177
... More
LT Line :-
-
-
-
... More
Equipments and switchgear:-
-
-
-
... More
Poles & Conductor/cable :-
-
-
-
... More
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-II) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32.
4
17027
68108
... More
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.
4
1630
6520
... More
Supply of ACSR "Rabbit" conductor of size 6/1/3.35 mm (50mm2) conforming to IS-398 (Part-II)/1996 with upto date amendments.
780
114
88920
... More
Supply of LT XLPE Cable 3.5. core 300 sq. mm
91
2735
248885
... More
Insulators:-
-
-
-
... More
Supply of Shackle Insulator complete with D-iron and spool tie.
20
114
2280
... More
Supply of Egg Insulator complete . (Supplied by the HPSEBL ) (Qty = 20 No. )
-
-
-
... More
Fittings and accessories :-
-
-
-
... More
Stay Sets:-
-
-
-
... More
Supply of Stay Set Suitable for LT line, (Galvanised) with anchor plate (200x200x6mm), 50x8mm stay clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & etc as required as per technical specification, approved drawings and scope of work. (Supplied by the HPSEBL ) (Qty = 3 set )
-
-
-
... More
Stay Wire:-
-
-
-
... More
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Supplied by the HPSEBL ) (Qty =18 kg )
-
-
-
... More
EARTHING:-
-
-
-
... More
Supply of Earthing set suitable for LT line made of GI pipe 25 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2000 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
2
783
1566
... More
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
4
133
532
... More
Supply of ISI marked Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.00 mm (8 SWG)
20
98
1960
... More
Earth Hook/ Earth Knob (Supplied by the HPSEBL ) (Qty =3 No. )
-
-
-
... More
Supply of Aluminium Paint for all poles and steel fitting
4
373
1492
... More
Erection Part:-
-
-
-
... More
11kV HT Line :-
-
-
-
... More
Erection of GO switch on tapping/Line structure
2
2321
4642
... More
Erection of steel tubular pole 10 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)
16
5918
94688
... More
Laying, sagging & erection of AB Cable 3X120+95 mmsq including jointing & jumpring etc. complete .
0.84
92698
77680.92
... More
Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
19
2276
43244
... More
Erection of Earthing set for HT Line (Digging of pit, fixing of GI wire to the earth system & filling of pit)
7
1732
12124
... More
Distribution Transformer :-
-
-
-
... More
Erection of 630 KVA , 11/0.433KV DTR complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire & painting complete in all respect
1
99487
99487
... More
Erection of 100 KVA , 11/0.433KV DTR, CT PT unit , complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire & painting complete in all respect
1
89523
89523
... More
Civil Works for 630KVA DTR (Foundation of DTR) :-
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:- all kind of soil.
7.56
182
1376.47
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 gradedstone aggregate 40 mm nominal size)
0.6
5627
3370.57
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) .
9.49
7077
67139.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
1.01
6331
6410.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
2.58
230
593.4
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
16.2
437
7079.4
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
474.35
82
38896.7
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm.
25.2
700
17640
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
292.6
114
33356.4
... More
Supplying and stacking at site:- Bajri Spreading of stone aggregate 20 mm thick.
1.2
1574
1888.8
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.
1
184
184
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.
1
34
34
... More
LT Line :-
-
-
-
... More
Erection of steel tubular pole 9 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole with RCC Muff,including cement concrete filling 1:3:6 (1 cement : 3 sand : 6 aggrigate 20 mm nominal size), Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Fixing of barbed wire danger plate , Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed)
4
5918
23672
... More
Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/3.35 mm (50mm2) for LT line
0.77
16331
12607.53
... More
Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
3
1945
5835
... More
Erection of Earthing set for LT Line (Digging of pit, fixing of GI wire to the earth system & filling of pit)
2
1449
2898
... More
Laying, stringing , sagging & binding of G.I. wire for LT line
0.19
4932
951.88
... More
Laying and erection of XLPE Cable (underground) complete with jumpering etc.
0.09
226215
20359.35
... More
Civil Part (LT XLPE Cable):-
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Ordinary rock.
35.27
295
10404.36
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size).
3.21
6807
21823.24
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe- 500D
1977.99
96
189887.23
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1069.3
135
144354.96
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) .
14.83
8351
123828.63
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls.
121.5
516
62694
... More
Eggs of slabs and breaks in floors and walls under 20cm wide
178.5
155
27667.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements