Himachal Pradesh State Electricity Board Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh State Electricity Board Limited - HPSEBL Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date31 Aug 2024
Closing DateCancelled
Tender Amount₹ 10,66,210
Costs
EMD
₹ 10,662Document Cost
₹ 560Tender Fee
Refer Documents
Summary
Revised Tender For Providing 11kv Ht Line To The Proposed 11/0.04kv 250 Kva S/stn Lwss To The Group Of Village In E Section Garsa Under Esd Nagwain Pump House At Neul Natauad Stage-1st Ts No 155/2023-24 On Turnkey Basis
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPSEB_92450_1Tender No
HPSEBL/TED/NIT-16/2024-25Tender Authority
Himachal Pradesh State Electricity Board Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply of ACSR conductor of size 6/1/3.35 mm (50mm2) conforming to IS-398 (Part-II)/1996 with upto date amendments
309
-
47.14
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm
6
-
1450
Supply of 11 kV Pin Insulator Brown Glazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm
9
-
154
Supply of Pole top bracket MS Angle Iron: 100x50x6, Length (100 mm x1 No.) :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 100x50x6 mm, suitable for fixing on Steel single pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
1
-
297
Supply of MS Angle Iron: 100x50x6, Length (1270mm x1 No.) Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 100x50x6 mm, suitable for fixing on Steel single pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
1
-
926
Supply of MS Angle Iron 50x50x6 mm Length (750 mm x2 No.) :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel single pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
2
-
274
Supply of MS Angle Iron 50x50x6 mmLength 1800 mm x 2No.): Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
2
-
658
Prov. X-Bracing Set - MS Angle Iron: 50x50x6, Length 2125 mm x 2No.)Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
2
-
777
Prov. X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length (2340 mm x2 No.)Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
8
-
1707
Supply of CI X-Arm (Horizontal) - MS Channel Iron: 75X40x6, Length (2800 mm x2 No.) for supporting GO switch and DO Fuse. Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
4
-
1558
Supply of GO switch handle supporting CI X-Arm (Horizontal) - MS Channel Iron: 75X40x6, Length (460mm) Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
1
-
256
Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.
5
-
1070
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)
50
-
78
Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
2
-
1133
Supply of Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.06 mm (8 SWG)
10.51
-
76
Supply of Eye hook
2
-
50
Supply of Earth Wire Clamp
1
-
273
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
20
-
118
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV
2
-
101
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
9.5
-
78
Supply of Half Clamp (MS Flat 50x6mm)
13
-
158
Supply of Full Clamp (MS Flat 50x6mm)
8
-
273
Supply of Aluminium Paint for all poles and steel fitting
4
-
345
GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type.
1
-
6739
D.O Fuse Unit
1
-
2173
Erection of HT LINE
-
-
-
Erection of steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Erection of pole, Drilling of holes in X-arm, , Fixing of insulator X-arm knee-bracing set top clamp, Fixing of barbed wire danger plate, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)
1
-
3434
Erection of steel tubular pole 9.00 Mtr. Long (Double pole str) digging of pit, Drilling of holes in X-arm, Erection of pole, Fixing of insulator X-arm, Fixing of barbed wire danger plate , Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)
1
-
7793
Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/3.35 mm (50mm2) including jumpering etc. complete.
0.3
-
10795
Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
5
-
1579
Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)
2
-
831
Laying, stringing , sagging & binding of GI Wire
0.1
-
3329
Erection of GO switch on tapping/Line structure
1
-
2950
Transportation by truck of HT Line its associate material including Loading Unloading.
0.1
-
11870
MANUAL CARRIAGE OF MATERIAL FOR HT LINE CONSIDERING AVERAGE DISTANCE FROM ROAD HEAD TO SITE OF WORK AVERAGE LEAD= 0.300 KM
-
-
-
HT Steel Poles 9 mtr. Long and RCC Muff
3
-
2524
Manual carriage of associate material (accept ST poles) like wise cross arm, bracing set, insulators, stay set, stay wire, Conductor & GI wire.
0.1
-
15015
Supply Part CT-PT Metering Equipment structure
-
-
-
Supply of PVC multistained 4 mm sq copper wire with ɸ-1 inch GI pipe for conceiling
1
-
3138
X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos for incomer line
2
-
2042
MS angle Iron (50X50x6 mm), Length : 2800 mm x 1 Nos for LA
1
-
1024
X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
4
-
1558
CT-PT bed, belting & Knee Bracing
-
-
-
X-Arm Channel Iron (100x50x6mm),Length :2800mmx2Nos CT-PT Bed
2
-
2042
X-Arm Channel Iron (100x50x6mm),Length :460mmx2Nos supporting main channel CT-PT
2
-
336
MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos
2
-
1024
MS angle Iron (35X35x5 mm), Length : (460 mm) x 2 Nos
2
-
115
CT-PT GO Switch fixing Assembly
-
-
-
MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos
2
-
1024
MS angle Iron (35X35x5 mm), Length : (460 mm) x 2 Nos
2
-
115
GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type.
1
-
6739
D.O Fuse Unit
1
-
2173
Surge Arrester, 9 kV Station Class (Porcelain Type)
3
-
371
Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)
3
-
1450
Stay set complete
4
-
1070
Stay Wire (7/3.15 mm) (7kg Per Stay Set)
28
-
78
Pipe Earthing Set
3
-
3390
Half Clamp (M.S. Flat 50x5 mm)
17
-
158
Full Clamp (M.S. Flat 50x5 mm)
9
-
273
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
27
-
118
Aluminium Thimble
16
-
42
Aluminium Thimble
4
-
337
Barbed wire
15
-
74
Danger Plate
1
-
101
Aluminium Paint.
4
-
345
Erection Part (CT-PT Metering Equipment structure):-
-
-
-
Erection of CT-PT Metering Equipment structure, complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.) , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Providing Earthing connection including G.I.Wire to G.O Switch, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Barbed wire & painting complete in all respect
1
-
35400
Add transportation charges of CT-PT Metering Equipment structure to site of erection. Including loading and unloading.
1
-
2500
Supply Part DTR 250kva
-
-
-
Supply, Testing etc. including Design, engineering, manufacture, assembly, inspection, testing and delivery of ISI marked, non-sealed, oil immersed, ONAN type, 50 Hz. double wound, 3-phase- 11/0.433KV, 250KVA, outdoor type distribution transformers, for use in power distribution system. (Approved vendor of HPSEBL)
1
-
336004
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-47
2
-
12600
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any.
2
-
1769
X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 4 Nos for incomer line
4
-
2042
MS angle Iron (50X50x6 mm), Length : 2800 mm x 1 Nos for LA
3
-
1024
X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
4
-
1558
Transformer bed & Chain link fencing , angle iron , gate etc. for tfr. Fencing (civil work) as per HPSR
1
-
165302
MS angle Iron (50X50x6 mm), Length : (450 mm) x 2 Nos
1
-
165
GO switch handle Supporting : (Channel iron (75x40x6 mm) , Length: 460mm.
1
-
256
GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type.
1
-
6739
D.O Fuse Unit
1
-
2173
Surge Arrester, 9 kV Station Class (Porcelain Type)
3
-
1167
Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)
3
-
1464
Stay set complete
4
-
1070
Stay Wire (7/3.15 mm) (7kg Per Stay Set)
24
-
78
Pipe Earthing Set
3
-
3390
Supply of LT Distribution Panel Box suitable for 250KVA S/Stn of size 1100x800x275mm +/- 5% made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated painted complete withLT Distribution Panel Box with MCCB 400 amp 3P 50kA-1 No. Make L&T , Schneider and ABB only, MCCB 250 Amp 36kA 3P of L&T Schneider and ABB make only 3No. MCCB Rating 250Amp, 3 Poles having following specifications (1) Minimum frame size 250 Amp (2) Type variable trip free, (3) Breaking capacity- Isu & LCS at 415, 50 Hz (KA: not less than 50 KA) (4) , Thermal release range: 320-440Amp (5) Mecanical life (operation) 20000 No. (6) Electrical life (operation) 4000 No. (7) Rated insulation voltage (V) 690V (8) Tripping thermal releasing setting : Thermal-O/L variable setting (9) Tripping magnetic releasing setting : Magnetic- S/C fixed setting (12) in (10) (Operation) volatge 415V, AC (11) Caliberation temperature: 40 degree C (12) High voltage withstand voltage : 3KV for 1 minute (13) Confirming to IS : 1993/60947-2, 1989 (14) Make L&T/ Havells/ABB/ HPL/ Schiender and approved vendor of HPSEBL (15) ICS : 100% ICU Reangular type aluminum alloy bus bar of 250 Amp. having length 800 mm of Phase 800 mm long for netural outgoing feeder 3 nos. outgoing feeders shall be made in the Pannel U type Single pole MCCBs of 400 Amp. shall be provided in all 3- phases. The panel shall be fully wired with insulated copper wire have adequate clearance . As per standard specification
1
-
39496
Half Clamp (M.S. Flat 50x5 mm)
17
-
158
Full Clamp (M.S. Flat 50x5 mm)
9
-
273
Guide Clamp
1
-
273
Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
27
-
118
Aluminium Thimble
16
-
42
Aluminium Thimble
4
-
337
Barbed wire
15
-
78
Danger Plate
1
-
101
Aluminium Paint.
4
-
345
LT Cable (3.5 core ) 300 mm2
30
-
811
ACSR Conductor 6/1/3.35 for jumpering
40
-
47.14
switch capacitor 81-KVR for 250 KVA transformer
81
-
795
Erection of DTR
-
-
-
Erection of 250 KVA , 11/0.433KV DTR, complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial size with curing complete etc.), Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire & painting complete in all respect.
1
-
46448
Transportation Charges inclusive of Hydra crane chages and mannual carriage of DTR and its associte material.
1
-
35400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements