Himachal Pradesh State Electricity Board Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh State Electricity Board Limited - HPSEBL Tender
Civil And Construction
Electrical Goods and Equipments
Electrical and Electronics
Eprocure
Opening Date27 Nov 2024
Closing Soon5 Dec 2024
Tender Amount₹ 4,18,724
Costs
EMD
₹ 4,190Document Cost
₹ 560Tender Fee
Refer Documents
Summary
Providing 63kva, 11/0.4kv Dtr Buragran Alongwith Associated Ht Line And Re-organisation Of Ld System From Proposed 63kva, 11/0.4kv Dtr Buragran In (e) Section Kolibehar Under Esd No. I, Hpsebl, Kullu
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPSEB_95874_1Tender No
NIT-75/2024-25Tender Authority
Himachal Pradesh State Electricity Board Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
1
2290
2290.74
Supply of 9kV, 10 kA Porcelain Station Surge Arresters complete with accessories for 11KV system
3
1284
3854.31
Supply & erection of LT Distribution Panel Box suitable for 63KVA S/Stn of size 900x800x200mm +/- 5% made of steel sheet of 1.63 mm thickness having double door locking arrangement duly powder coated painted complete with MCCB Rating 100Amp, 3 Poles having following specifications (1) Minimum frame size 100Amp (2) Type ; fixed trip free, (3) Breaking capacity- Isu & LCS at 415, 50 Hz (KA: not less than 35 KA) (4) , Thermal release range: 100Amp (5) Mecanical life (operation): 25000 Nos. (6) Electrical life (operation) 7000 Nos. (7) Rated insulation voltage (V) 690V (8) Tripping thermal releasing setting : Thermal-O/L variable setting (9) Tripping magnetic releasing setting : Magnetic- S/C fixed setting (12) in (10) (Operation) volatge 415V, AC (11) Caliberation temperature: 50 degree C (12) High voltage withstand voltage : 3KV for 1 minute (13) Confirming to IS : 1993/60947-2, 1989 (14) Make L&T/ Havells/ABB/ HPL/ Schiender (15) ICS : 100% ICU (LT Panel Box shall be supplied by the HPSEBL Qty=1 No.)
-
-
-
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-47 (Poles shall be supplied by the HPSEBL Qty=3 No.)
-
-
-
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any (RCC Muff shall be supplied by the HPSEBL Qty=3 No.)
-
-
-
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm Including dead end clamps etc.) (Disc Insulator shall be supplied by the HPSEBL Qty=3 No.)
-
-
-
Supply of LT Cable 70 mm2 PVC (1.1kV,3.5 C, Al, Un-Armour) (LT cable shall be supplied by the HPSEBL Qty= 40 mtr)
-
-
-
Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.
2
1224
2448.86
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Stay wire shall be supplied by the HPSEBL Qty=14 kg.)
-
-
-
Supply of Earthing set suitable for Substations made of GI pipe 38 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 3000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. Bottom end of the pipe shall be weilded with MS Plate of Size 300x300x6mm.
3
1589
4768.74
Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
(X- Arm 2800 mm long shall be supplied by the HPSEBL Qty=4 No.)
-
-
-
460 mm for supporting of main channel of CTPT/DTR
2
385
771.9
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
2800 mm for G.O. Switch and D.O. Fuse Unit
4
1756
7024.12
460 mm for GO switch handle supporting
1
269
269.44
Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
2800 mm for supporting LA, LT Distribution Box
3
1088
3264.45
450 mm long
1
172
172.69
950 mm long
2
369
738.62
Supply & Erection of MS Angle Iron 35x35x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 35x35x6 mm, suitable for fixing on 11kV Steel double pole structure with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 2.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:
-
-
-
460 mm for CTPT unit belting & knee bracing
2
121
243.44
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
27
135
3651.48
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV
1
137
137.32
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
15
83
1248.3
Supply of Half Clamp (MS Flat 50x6mm)
17
176
3006.45
Supply of Full Clamp (MS Flat 50x6mm)
9
353
3183.3
Supply of Aluminium Thimbles suitable for LT cable 70mm2
16
15
249.6
Supply of Copper Thimbles
4
491
1964.08
Supply of Aluminium Paint for all poles and steel fitting
4
380
1523
Supply of LT switched capacitors 27-KVAr for 63KVA DTR
27
876
23660.91
63KVA, 11/0.4KV DTR (Erection Part):-
-
-
-
Manual Carriage of material (AVERAGE LEAD=1 Km)
1
23088
23088.74
Erection of 63KVA , 11/0.433KV DTR complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muffs , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire, LT switch capacitor bank & painting complete in all respect
1
86985
86985.91
11KV HT Line (Supply Part):-
-
-
-
Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-47 (Poles shall be supplied by the HPSEBL Qty =3 No.)
-
-
-
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any (RCC Muff shall be supplied by the HPSEBL Qty =3 Nos)
-
-
-
Supply of ACSR conductor of size 6/1/3.35 mm (50mm2) conforming to IS-398 (Part-II)/1996 with upto date amendments (ACSR conductor shall be supplied by the HPSEBL Qty=273 mtr)
-
-
-
Supply of Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.06 mm (8 SWG)
9
99
898.83
Supply of 11 kV Pin Insulator Brown Glazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm (Pin Insulator shall be supplied by the HPSEBL Qty= 6 No.)
-
-
-
Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm (Disc Insulator shall be supplied by the HPSEBL Qty= 9 No.)
-
-
-
Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:
-
-
-
2340 mm long
2
1756
3512.06
Supply of Cross Bracing set suitable for 11 KV made of only TATA/SAIL/Rashtriya ispat M.S. Angle Iron (2x2125x50x50X6 mm) confirming to REC specifications suitable for easily fixing on steel poles as per requirement
2
826
1652
Supply of Belt set suitable for 11 KV made of only TATA/SAIL/Rashtriya ispat M.S. Angle Iron (2x1800x50x50X6 mm) confirming to REC specifications suitable for easily fixing on steel poles as per requirement
2
699
1398.16
Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. (Stay Set shall be supplied by the HPSEBL Qty =4 No.)
-
-
-
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Stay wire shall be supplied by the HPSEBL Qty = 40 Kg)
-
-
-
Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
1
1359
1359.67
Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV
1
137
137.32
Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.
1
8861
8861.28
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
6
122
736.56
Supply of Galvanised steel barbed wire of 9.8 kg /100metre
7.5
99
749.03
Supply of Half Clamp (MS Flat 50x6mm)
6
176
1061.1
Supply of Full Clamp (MS Flat 50x6mm)
6
353
2122.2
Supply of Aluminium Paint for all poles and steel fitting
3
380
1142.25
11KV HT Line (Erection Part):-
-
-
-
Manual Carriage of material (AVERAGE LEAD=0.250Km) Qty= 0.250x0.090= 0.023
0.02
69346
1594.96
Erection of steel tubular (Tripple pole str) digging of pit, Drilling of holes in X-arm, Erection of pole, Fixing of insulator X-arm, Fixing of barbed wire danger plate , Concreting of RCC Muff, Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)
1
18422
18422.84
Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/3.35 mm (50mm2)
0.27
16494
4503
Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
4
2298
9195.92
Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)
1
1749
1749.56
Laying, stringing , sagging & binding of GI wire
0.09
4981
453.34
Jumpering
1
246
246.7
Erection of GO switch unit
1
3575
3575.4
LT Line (Supply Part):-
-
-
-
Supply of 8.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32 (Poles shall be supplied by the HPSEBL Qty = 12 No.)
-
-
-
Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any (RCC Muff shall be supplied by the HPSEBL Qty = 12 No.)
-
-
-
Supply of ACSR conductor of size 6/1/2.59 mm (30mm2) conforming to IS-398 (Part-II)/1996 with upto date amendments (ACSR conductor shall be supplied by the HPSEBL Qty= 3979mtr)
-
-
-
Supply of Shackle Insulator (16KN)
72
27
1947.6
Supply of D Iron (U-Clamps) (D-Iron shall be supplied by the HPSEBL Qty= 72 Nos)
-
-
-
Supply of Spool Tie
72
62
4494.24
Supply of LT Stay Sets suitable for LT lines made up of MS round 1600mm in length, 16 mm dia having threads up to 300 mm on one end with one nut and one check nut to avoid slippage and eye of 40 mm dia on other side and welded confirming to REC specifications. Elbow made of MS channel iron 70x40x6mm,250 mm long and MS round 16mm dia, vertical height 300mm , both ends bent after putting in two holes of channel iron taking the ends out 25mm minimum and welded with channel iron. One anchor of angle iron 50x50x6 mm ,750 mm in length with one hole of 20mm dia in the center .The complete stay set shall be painted with superior quality black Japan paint. (Stay Set shall be supplied by the HPSEBL Qty=6 Nos)
-
-
-
Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) (Stay wire shall be supplied by the HPSEBL Qty=36 Kg )
-
-
-
Supply of Channel Iron (75x40x5) Length-1.50 mtr+0.2
12
1055
12670.8
Supply of Half Clampfor cross arm
36
176
6366.6
Supply of Earthing set suitable for LT line made of GI pipe 25 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 2000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.
4
798
3195.8
Supply of Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.06 mm (8 SWG).
101
99
10086.87
Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size
21
135
2840.04
Supply of Earth Knob/Hook
12
55
661.68
Supply of Aluminium Paint for all poles and steel fitting
12
380
4569
LT Line Jathani (Erection Part):-
-
-
-
Manual Carriage of material (AVERAGE LEAD=1 Km) for 3 Ph LT Qty= 1x0.985= 0.985 Km
0.99
35703
35167.55
Erection of steel tubular pole complete viz digging of pit, Erection of pole, Fixing of insulator, Concreting of RCC Muff, Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)
12
3246
38961.36
Laying, stringing , sagging & binding with Insulator of ACSR rabbit conductor of size 6/1/2.59 mm (30 mm sq.mm)
3.98
7639
30399.4
Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)
6
1714
10286.46
Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)
4
1277
5109.96
Laying, stringing , sagging & binding of GI wire
1
4348
4326.71
Fixing of Jumper
4
215
861.36
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%