Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Sep 2023
Closing Date22 Sep 2023
Tender Amount₹ 6,80,06,628
Costs
EMD
₹ 7,12,570Document Cost
₹ 2,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HPIPH_78813_1Bid Award Id
ViewTender No
EE-JSV-HMR-E-tenders-2022-23Tender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Disposal of excavated earth by mechanical
transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for
all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having
directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.
125
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.up-to all lead and lifts as per the diretion of Engineer in Charge at site.
105
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete up-to all lead and lifts as per the diretion of Engineer in Charge at site.
61.97
-
-
FORM WORK/R.C.C. WORK CHAPTER-4&5
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete up-to all lead and lifts as per the diretion of Engineer in Charge at site.
594.76
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform up-to all lead and lifts as per the diretion of Engineer in Charge at site.
2010
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers up-to all lead and lifts as per the diretion of Engineer in Charge at site.
1492.72
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts up-to all lead and lifts as per the diretion of Engineer in Charge at site.
653.15
-
-
(h) Edges of slabs and breaks in floors and walls. Under 20 cm. Wide up-to all lead and lifts as per the diretion of Engineer in Charge at site.
398.6
-
-
CEMENT CONCRETE CHAPTER-4
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
64.18
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
24.86
-
-
REINFORCEMENT CEMENT CONCRETE CHAPTER-4
-
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
183.2
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
553.76
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
174.44
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars up-to all lead and lifts as per the diretion of Engineer in Charge at site.
85853.92
-
-
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar
by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge.
800
-
-
BRICK WORK CHAPTER- 6
-
-
-
Brick work with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in foundation and plinth
in:Cement mortar 1:4 (1 cement : 4 coarse
sand)
110.27
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
307.34
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
2216.02
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
49.62
-
-
STONE WORK CHAPTER-7
-
-
-
Providing and laying local stone cladding 10mm to 12mm. as mentioned in the drawing [ ST-O1 & ST-2] cladding on R.C.C.surface side as on faces of brick masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete.
567.49
-
-
WOOD WORK CHAPTER-9
-
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless
steel screws etc Saal wood up-to all lead and lifts as per the diretion of Engineer in Charge at site.
4
-
-
Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) 1st class deodar wood. 25 mm thick up-to all lead and lifts as per the diretion of Engineer in Charge at site.
120
-
-
Providing and fixing flat pressed 3 layer particle marino board heavy density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):up-to all lead and lifts as per the diretion of Engineer in Charge at site.
-
-
-
a) 12 mm thick
165.79
-
-
Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710 up-to all lead and lifts as per the diretion of Engineer in Charge at site.
6.75
-
-
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture up-to all lead and lifts as per the diretion of Engineer in Charge at site.
24.52
-
-
Providing and fixing MDF Jali IN CEILING of approved shade and designe
64.99
-
-
Providing and fixing Sakarni/JB Hisar/ Adhar shree POP false ceiling consisting of frame GI channel main cross and L & hanging member of heavy quality size & shape with wire gauge mesh applying POP to the expended metal of thickness 10mm thick finish smooth to line and level and design as per the direction of Enginner in charge including carriage of materials in all leads lifts and heights in Flat Surfaces
539.53
-
-
Providing and fixing Sakarni/JB Hisar/ Adhar shree POP false ceiling consisting of frame GI channel main cross and L & hanging member of heavy quality size & shape with wire gauge mesh applying POP to the expended metal of thickness 10mm thick finish smooth to line and level and design as per the direction of Enginner in charge including carriage of materials in all leads lifts and heights in Curved/ moulded Surfaces
107.91
-
-
Providing and fixing Sakarni/JB Hisar/ Adhar shree POP false ceiling consisting of frame GI channel main cross and L & hanging member of heavy quality size & shape with wire gauge mesh applying POP to the expended metal of thickness 10mm thick finish smooth to line and level and design as per the direction of Enginner in charge including carriage of materials in all leads lifts and heights in sunk or raised Surfaces
80.93
-
-
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side 9.130
99.23
-
-
Providing and fixig of 8mm thick ET125 toughned reflective glass of saint Gobain or equivlent in window panes and fixed portions complete in all respect with moulding etc. including carriage of matrials in all leads and lifts
117.46
-
-
Providing wood work in frames of doors, windows, clerestory window and other frames wrought, framed and fixed in position : Second class teak wood including carriage of matrials in all leads and lifts
3
-
-
Providing and fixing 30mm thick Second class teak woodglazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
28.8
-
-
Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter. 35mm thick including black enamelled M.S. butt hinges .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
16.88
-
-
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height).up-to all lead and lifts as per the diretion of Engineer in Charge at site.
50
-
-
Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
-
-
-
Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.).up-to all lead and lifts as per the diretion of Engineer in Charge at site.
200
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 12mm thick
200
-
-
Providing and fixing double action hydraulic floor springof approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
6
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
29
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
29
-
-
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
29
-
-
Providing and fixing 300 mm long decorative type bright finished stainless steel handle necessary brass screws etc. to suit shutter thickness complete .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
60
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides .up-to all lead and lifts as per the diretion of Engineer in Charge at site.
31.2
-
-
PAVING & FLOORING CHAPTER-11
-
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate up-to all lead and lifts as per the diretion of Engineer in Charge at site.
617.82
-
-
Providing and Fixing 12mm thick class 33 AC-5 Green lam/ pergo or equivelent make in wooden shade laminate flooring complete in all respect including carriage of materials in all lead and lifts.
355.16
-
-
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shadeincluding rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc up-to all lead and lifts as per the diretion of Engineer in Charge at site.
372.55
-
-
Providing and laying vitrified floor double charged tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. 600 x 600 mm up-to all lead and lifts as per the diretion of Engineer in Charge at site.
474.67
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick up-to all lead and lifts as per the diretion of Engineer in Charge at site.
411.75
-
-
Providing and fixing Ist quality ceramic glazed wall tiles (450x900) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete up-to all lead and lifts as per the diretion of Engineer in Charge at site.
275.99
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete
199.74
-
-
Providing and laying Hard Stone (cobble stone) 6"x6"x4" flush smooth with 8mm joints on 50mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. (as directed by engineer in charge)up-to all lead and lifts as per the diretion of Engineer in Charge at site.
250
-
-
Providing and laying pavers 80mm thick (as approved by engineer in charge) on cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. pavers NTC (as approved by engineer in charge) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
210
-
-
Grassing with carpet imported grass Barhmuda / Mexican including watering and maintenance of the lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed and proper mixed with imported earth and sludge or manure as per specification including carriage of materials in all lead and lifts.
500
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent up-to all lead and lifts as per the diretion of Engineer in Charge at site.
37.86
-
-
CEMENT PLASTER
-
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand
3846.57
-
-
15 mm cement plaster on rough side of single or half
brick wall of mix:
3627.77
-
-
6mm Cement Plaster to ceiling. In cement mortar 1:3 (1 cement : 3 sand) up-to all lead and lifts as per the diretion of Engineer in Charge at site.
124.46
-
-
Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862 up-to all lead and lifts as per the diretion of Engineer in Charge at site.
275.99
-
-
STEEL WORK CHAPTER- 10
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. up-to all lead and lifts as per the diretion of Engineer in Charge at site.
24245
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1930
-
-
Providing and fixing of MS Decorative ornamrntal Bracket made of MS Hollow / 50x50x6 , and other sections as per elevation/ drawing of size 1.67x 1.50
15
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainlesssteel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1000
-
-
ROOFING WORK CHAPTER-12
-
-
-
Providing and fixing ridges or hips 60 cm overall with 0.62 mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges of TATA Make.
35
-
-
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge of TATA make.
40
-
-
Providing and fixing flushing 38cm overall with 0.62 mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge of TATA make.
40
-
-
Providing & fixing 15 cm wide 45 cm overall semicircular prepainted g.i. sheet gutter with iron brackets 40x3mm size bolts & nuts with washers etc. including making necessary connection withrain water pipe complete as per design in 0.63 mm th. Sheet up-to all lead and lifts as per the diretion of Engineer in Charge at site. of TATA Make.
140
-
-
Providing and fixing M.S. BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)up-to all lead and lifts as per the diretion of Engineer in Charge at site.
99
-
-
Providing and fixing Asphalt shingle sheet roofing with ridge of Saint Gobian of approved thickness J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
522.37
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 10 mm diameter up-to all lead and lifts as per the diretion of Engineer in Charge at site.
94.2
-
-
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 110mm diaup-to all lead and lifts as per the diretion of Engineer in Charge at site.
20
-
-
FINISHING CHAPTER-13.00
-
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete up-to all lead and lifts
7474.35
-
-
Applying priming coat on new concrete /masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with Readymixed primer up-to all lead and lifts
7474.35
-
-
Painting two coats (excluding priming coat)on new steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt,dust and other foreign matter up-to all lead and lifts as per the diretion of Engineer in Charge at site.
200
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two or more coats up-to all lead and lifts as per the diretion of Engineer in Charge at site.
7474.35
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm up-to all lead and lifts as per the diretion of Engineer in Charge at site.
300
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture up-to all lead and lifts as per the diretion of Engineer in Charge at site.
50
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture up-to all lead and lifts as per the diretion of Engineer in Charge at site.
200
-
-
Polishing two or more coats with malamine polish of required shade (in matt finish) on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler
200
-
-
MISCELLENEOUS
-
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50metres up-to all lead and lifts as per the diretion of Engineer in Charge at site.
450
-
-
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On bituminous surface @ 0.50 Kg / sqm and as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts.
450
-
-
Providing and laying Bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder, transported to site by tippers, laid over a peviousaly prepared surface with paver finisher equiped with electronic sensor to the required grade level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specification to achieve the desired compaction and density complete and as per specification/direction of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity including carriage of materials within all leads and lifts.
33
-
-
Earth work in surface excavation not exceeding 30 cm in POSTCONSTRUCTIONALanti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cementmortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
411.75
-
-
Making plinth protection 50mm thick of cement concrete1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
58.2
-
-
Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1cement:6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1cement:5sand:10 graded stone aggregate) of 40 mm nominal size and 7.5 cm cement concrete 1:2:4 (1cement :2sand:3 graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials in all leads and lifts.
150
-
-
ELECTRICAL INSTALLATION
-
-
-
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C
496
-
-
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
750
-
-
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-
-
-
-
4 modules(140mmx78mmx50mm)
65
-
-
6 modules(205mmx78mmx50mm)
75
-
-
8 modules (120mmx135mmx60mm)
90
-
-
12 modules (205mmx135mmx60mm)
135
-
-
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
-
-
-
2x1.5 Sq. mm.
750
-
-
2x2.5 Sq. mm.
3400
-
-
2x4.0 Sq. mm.
700
-
-
Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable
for earthing wire from MCB box to main pannel board.
240
-
-
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed
PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar.
120
-
-
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
-
-
-
S.P. 5/ 6 Amps one way Modular switch.
390
-
-
5 pin, 5/ 6 Amps Modular socket outlet.
176
-
-
Bell push, Modular.
30
-
-
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
-
-
-
S.P. 15/ 16 Amps one way Modular switch
89
-
-
6 pin,15/16 Amps Modular socket outlet.
89
-
-
Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.
21
-
-
Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.
24
-
-
Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.
56
-
-
Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required.
10
-
-
Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
4
-
-
Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required.
4
-
-
Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A
4
-
-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required.
58
-
-
Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-
2
-
-
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc.
8
-
-
Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
8
-
-
Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP,
on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.
26
-
-
Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A
2
-
-
Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
8
-
-
Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.
6
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.
2
-
-
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)
75
-
-
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)
120
-
-
Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.
4
-
-
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, rmoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights.
200
-
-
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A) of Havells and Jaguar make.
18
-
-
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A
52
-
-
Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc.
23
-
-
Providing and fixing 2 x36 watt-LED Panel surface mounting /recessed type light fixture 60x60cms size syska/jaquar make.
18
-
-
Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A)
42
-
-
Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x20W LED coplete in all respect.
22
-
-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required
23
-
-
Supplying and fixing LED BULBS 11 watt suitable for D.C./A.C. single phase,230 volts complete as required
42
-
-
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.
290
-
-
Supplying and fixing bakelite batten/angle holder including connections etc. as required.
12
-
-
Supplying and fixing of integral LED Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CLED 22 watt.
6
-
-
Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.
52
-
-
Supplying and fixing of INTERCOME exchange of reputed brand having 20 connections with sets
1
-
-
Supplying and fixing of split type air conditioner Blue star/havells/carrier/ LLoyd/Decor make having two stars features auto clean filter four wayu swing all copper pipes including making provision of draining of back moisture water through GI pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required
-
-
-
1.50 Tonne capacity
18
-
-
2.00 Tonne Capacity
8
-
-
Providing and fixing boundary lights 20x30cms clear light fixture, top mounted,with 20 watt LED bulb.
50
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
570
-
-
32 mm
250
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
570
-
-
2 run of cable
100
-
-
3 run of cable
100
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings)..
19
-
-
Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed jelly filled armoured telecommunication cable as per specifications.
-
-
-
5 pair armoured riser cable of 0.60 mm dia copper conductor
20
-
-
10 pair armoured riser cable of 0.60 mm dia copper conductor
100
-
-
20 pair armoured riser cable of 0.60 mm dia copper conductor
100
-
-
Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet medium duity PVC enclosure complete as required.
-
-
-
5 pair Krone type tag block
2
-
-
10 pair Krone type tag block
6
-
-
20 pair Krone type tag block
10
-
-
50 pair Krone type tag block
2
-
-
Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete.
19
-
-
MAIN LT PANEL -Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & outdoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel
1
-
-
1 nos. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection.
-
-
-
1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 100/5A.
-
-
-
1 Set of phase indicating lamp with MCB
-
-
-
Shunt Trip Coil
-
-
-
Breaker ON/OFF/TRIP indicating lamps with control fuses.
-
-
-
BUSBAR
-
-
-
400 A TPN Bus bar of aluminimum alloy. - 1 Set
-
-
-
OUTGOINGS
-
-
-
- 200 A, TPN,36KA, MCCB – 1 N.o.
-
-
-
- 160 A, TPN,36KA, MCCB – 1 N.o.
-
-
-
- 100 A, TPN,25A, MCCB – 2 N.o.
-
-
-
- 63 A, TPN,10KA, MCB – 11 N.o.
-
-
-
- 40 A, TPN,10KA, MCB – 8 N.o.
-
-
-
- 32 A, TPN,10KA, MCB – 6 N.o.
-
-
-
CAPACITOR SECTION (100 KVAR)
-
-
-
SECTION –1
-
-
-
INCOMER
-
-
-
200 A, 3 Pole, MCCB with U/V release and shunt release with a minimum of 5 NO and 5NC auxiliary contacts and with following :-
-
-
-
METERING & CONTROLS
-
-
-
- breaker ON/OFF/TRIP indicating lamps with control fuses.
-
-
-
- shunt trip coil
-
-
-
Automatic Power Factor
-
-
-
correction system with following :
-
-
-
1 number solid state Binary mode
-
-
-
automatic power factor sensing and
-
-
-
correction relay complete in all
-
-
-
respects ( 10 stages)
-
-
-
The APFCR relay will be from the DUAL SOURCE MULTIFUNCTION METER FROM TRINITY- MODEL- 'POWER CUBE'.The relay will have different set points for the mains supply & generator supply.
-
-
-
LT Power Capacitor Banks along with contactors and HRC fuses as detailed below:
-
-
-
3 number TP Contactors of 63 A Capacity with MCCB – 25 kVAR
-
-
-
2 number TP Contactors of 40 A Capacity with MCCB – 10 kVAR
-
-
-
1 number TP Contactors of 32 A Capacity with MCCB – 5 kVAR
-
-
-
EXTERNAL LIGHTING PILLAR- OUTDOOR TYPE -Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & outdoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel
1
-
-
INCOMER FROM MAIN LT PANEL
-
-
-
1*40A TPN ,10KA,MCB+ELCB (30MA)
-
-
-
METERING & INDICATION
-
-
-
1 sets of phase indicating lamps
-
-
-
1 sets of Voltmeter (0-500V) with VSS each with 3 nos. 2A SP MCBs each
-
-
-
1 Sets of Breaker ON-OFF-TRIP,
-
-
-
BUS BAR as per SLD:-
-
-
-
1 Sets of 100A, TPN Aluminum bus bars with colour coded sleeves.
-
-
-
OUTGOINGS as per SLD
-
-
-
40 A,TP,10KA, Contactor -1 outgoings
-
-
-
Timer
-
-
-
10/16/25/32 A,SP,10KA, MCB,- 18 outgoings
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
100
-
-
32 mm
25
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
100
-
-
2 run of cable
25
-
-
3 run of cable
18
-
-
Dome Camera
-
-
-
Supply, installation, testing and commissioning of IP based, 2 MP, FULL HD WDR IR DOME CAMERA - 20 MTRS, colour indoor verifical dome camera, 3.6 MM FIXED LENS, 1/3 ", 2 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 20 Mtrs, IP67 and all ancillary equipments and all accessories.
1
-
-
CP PLUS MAKE - UNC DD40L3-D OR EQUIVALENT IN OTHER MAKES LIKE SONY/ HONEYWELL.
-
-
-
Bullet cameras
-
-
-
Supply, installation, testing and commissioning of IP based, 2 MP, FULL HD WDR IR bullet CAMERA - 40 MTRS, colour indoor verifical dome camera, 3.6 MM FIXED LENS, 1/3 ", 2 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 30 Mtrs, IP67 and all ancillary equipments and all accessories.
3
-
-
CP PLUS MAKE - UNC TD40L4-D OR EQUIVALENT IN OTHER MAKES LIKE SONY/ HONEYWELL.
-
-
-
Network Video Recorder
-
-
-
Supply, Installation, Testing and Commisioning of 8 CHANNEL NETWORK VIDEO RECORDER, H.264/MJPEG dual codec decoding,Max 256 Mbps incoming bandwidth, HDMI/ VGA simulation video output, support 8 SATA HDD's upto 16 TB, 1 ESATA up to 8 TB, supports multi brand network cameras. Each NVR shall have a storage capacity so as to record a backup for 15 days at 4 CIF @ 25FPS.NVR should have system expandibility feature of at least 20% of current requirement, redundant fan and power supplies, outputs TCPIP network feature & server software monitor outputs. The NVR should be networkable via IP protocol & should be able to connect to a web based system for remote viewing via web system. Vendor should submit the storage / HDD Calculation.
1
-
-
CP PLUS MAKE - UNR 7364R8-R OR EQUIVALENT IN OTHER MAKES LIKE SONY/ HONEYWELL.
-
-
-
Supply, Installation, Testing and commisioning of 32" inches LCD monitor
1
-
-
SITC OF 125 KVA DG SET
-
-
-
Providing, Installing, Receiving, unloading, shifting to Sub-Station, storing, handling, Testing and Commissiong of 'Silent Type' Diesel Generating set alongwith Prime Power Rating 125 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 433V suitable for 50 Hz, 3 phase system & for 0.80 Load Factor equipped with AMF panel and consisting of the followings:
1
-
-
Diesel Engine:
-
-
-
Diesel engine 4 stroke radiator Cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 50 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continous operation. The engine will be fitted complete with electronic Governer and all the required accessories.
-
-
-
Engine mounted Instrument Panel fitted with and having digital display for following:
-
-
-
(i) Start-stop switch with key
-
-
-
(ii) Coolant temperature indication
-
-
-
(iii) Lubrication oil pressure indication
-
-
-
(iv) Lubrication oil temperature indication
-
-
-
(v) Battery charging indication
-
-
-
(vi) RPM indication
-
-
-
(vii) Over speed indication
-
-
-
(viii) Low lub. Oil trip indication
-
-
-
(ix) Engine Hours indication
-
-
-
(x) Engine protection unit and sensors for winding & bearing temperature monitoring
-
-
-
(xi) Remote Monitoring Module
-
-
-
Alternator
-
-
-
Synchronous alternator rated at 125 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.80 lagging power factor at 50 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having microprocessor based controller with BMS compatibility, SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation.
-
-
-
Cable termination Box suitable to receive 200A, TPN Busduct Sandwich or air insulated type.
-
-
-
Base Frame & Foundation:
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and antivibration mountings arrangement as per recommendations of manufacturer.
-
-
-
Fuel Tank: (External)
-
-
-
Daily service fuel tank of suitable (375 Litre) capacity fabricated out of 3 mm thick M.S./CRCA sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.
-
-
-
Exhaust System:
-
-
-
Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor.
-
-
-
Starting System:
-
-
-
DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 2 x 65 AH, 12V capacity SMF lead acid type) as required as per specifications.
-
-
-
Accoustic for weather and noice proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per CPCB-II Norm & technical specifications.
-
-
-
Complete one Set
-
-
-
Supply, installation, testing & commissioning of 990 litres capacity day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller & breather of Sadhir/Kirloskar make
-
-
-
Supplying and fixing Exhaust gas piping of 1x100 mm dia. welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications.
-
-
-
CABLING
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/existing open trence/as required.
-
-
-
Upto 35 sq. mm
20
-
-
Above 35 sq. mm and upto 95 sq. mm
10
-
-
Above 95 sq. mm and upto 185 sq. mm
10
-
-
Above 185 sq. mm and upto 400 sq. mm
10
-
-
Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle
20
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
10
-
-
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
10
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
-
-
-
2 X 6 sq. mm (19mm)
10
-
-
2 X 10 sq. mm (19mm)
2
-
-
3½ X 35 sq. mm (32mm)
4
-
-
3½ X 50 sq. mm (35mm)
2
-
-
3½ X 70 sq. mm (38mm)
2
-
-
3½ X 95 sq. mm (38mm)
2
-
-
3½ X 150 sq. mm (45mm)
14
-
-
3½ X 185 sq. mm (57mm)
2
-
-
3½ X 240 sq. mm (62mm)
6
-
-
4 X 10 sq. mm (25mm)
8
-
-
4 X 16 sq. mm (28mm)
22
-
-
4 X 25 sq. mm (28mm)
12
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
25
-
-
150 mm dia
25
-
-
300 mm dia
25
-
-
Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
400
-
-
HT CABLE END TERMINATION
-
-
-
Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as per IS 7098 (Part-2) 1985 with the latest ammendments of following sizes as required
-
-
-
120 sq. mm
5
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
-
-
-
120 sq. mm
1
-
-
SANITARY FITTING
-
-
-
Providing and fixing high pressure spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
400
-
-
100mm dia
350
-
-
Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
96
-
-
100mm dia
96
-
-
Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
16
-
-
100mm dia
16
-
-
Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
56
-
-
100mm dia
56
-
-
Providing and fixing PVC Single equal brach of following diameter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
22
-
-
100mm dia
22
-
-
Providing and fixing PVC Single equal brach with oval access of following diameter i/c entire carriage of material within all leads and lifts.
-
-
-
75mm dia
19
-
-
100mm dia
19
-
-
Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts.
72
-
-
Providing and fixing of M.I. union for wash basin 32mm dia i/c carriage of material within all leads and lifts.
32
-
-
Providing and fixing 32mm dia PVC waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.
32
-
-
Providing and fixing 90x60cms. bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.
18
-
-
Providing and fixing C.P. brass towel rail complete with C.P.brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm.
16
-
-
Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.
16
-
-
Providing and fixing Tooth brush and tumbler holder i/c entire carriage of material within all leads and lifts.
16
-
-
Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.
125
-
-
Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.
72
-
-
Providing and fixing CP towel rack 600x250mm for VIP toilet i/c entire carriage of material within all leads and lifts.
5
-
-
Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts
-
-
-
15mm dia
120
-
-
20mm dia.
350
-
-
32mm dia
95
-
-
Providing & fixing Brass full way wheel valve i/c entire carriage of material within all leads & lifts
-
-
-
20mm dia
10
-
-
32mm dia
8
-
-
Providing and fixing 115x50x25cms size double bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts.
2
-
-
Providing and fixing 2000 ltrs. Double layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts.
6
-
-
Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing &testing. (i) inside size 1200 x 900 x 1000 mm deep i/c c.i. cover with frame (m. duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms. thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand).
8
-
-
Providign & fixing tone ware guly trap grade A complete with CI grating B/Masonry chamber in cement mortor 1:5 & water tight CI cover with frame of 300mm x300 mm size (inside) The wt of cover to be not less then 4.53 Kg & frame to be not less than 2.72 Kg (Square mouth traps 100x100 mm size)
12
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast P or S trap, 10 Litre low level P.V.C. flushing cistern with manually controlled device(handle lever) conforming to IS:7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required.
-
-
-
White vitreous chinaOrissa pattern W.C. pan of size 580x480mm with integral type foot rests.
2
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors
-
-
-
100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989
59
-
-
FOR ROOM TOILETS
-
-
-
Supply, installation and commissioning of FLORANTINE-COUNTER TOP WASH BASIN Model No; FLS-WHT-5935- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of 'FLORANTINE- WALL HUNG WC, CISTERN AS PER WC Model No; FLS-WHT-5953- JPPSM- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of ''VIGNETTE PRIME- SINGLE LEVER BASIN MIXER Model No;VGP-81011B- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of ''HEALTH FAUCET Model No;ALD-587- Jaquar or equivalent. Item includes all hardware required for installation.
19
-
-
Supply, installation and commissioning of ''SHOWER HEAD Model No;OHS-1709- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of ''VIGNETTE PRIME-DIVERTER Model No;VGP-81079NK- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of ''FUSION- SPOUT Model No;FUS-29231- Jaquar or equivalent. Item includes all hardware required for installation.
19
-
-
Supply, installation and commissioning of ''CP WASTE JALI Model No;ALD-729- Jaquar or equivalent. Item includes all hardware required for installation.
21
-
-
Supply, installation and commissioning of ''BOTTLE TRAP (WITH INTERNAL PARTITION) 32 MM SIZE WITH 250 MM & 190MM LONG WALL CONNECTION PIPES Model No;ALD-769L250x190- Jaquar or equivalent. Item includes all hardware required for installation.
21
-
-
Supply, installation and commissioning of ''450MM LONG BRAIDED HOSE Model No;ALD-805B- Jaquar or equivalent. Item includes all hardware required for installation.
15
-
-
Supply, installation and commissioning of ''ANGULAR STOP COCK WITH WALL FLANGE Model No;VGP-81053- Jaquar or equivalent. Item includes all hardware required for installation.
60
-
-
Supply, installation and commissioning of ''SOAP DISPENSER WITH GLASS BOTTLE Model No;AKP-35735P- Jaquar or equivalent. Item includes all hardware required for installation.
35
-
-
Supply, installation and commissioning of ''GRAB BAR Model No;ACN-1101SP- Jaquar or equivalent. Item includes all hardware required for installation.
21
-
-
Supply, installation and commissioning of ''TISSUE PAPER HOLDER Model No;ACN-1121BN- Jaquar or equivalent. Item includes all hardware required for installation.
19
-
-
Supply, installation and commissioning of ''TOWEL RING Model No;ACN-1121BN- Jaquar or equivalent. Item includes all hardware required for installation.
21
-
-
Supply, installation and commissioning of ''FLUSH PLATE Model No;JCP-CHR-152415- Jaquar or equivalent. Item includes all hardware required for installation.
19
-
-
Supply, installation and commissioning of ''COAT HOOK Model No;ACN-1161N5- Jaquar or equivalent. Item includes all hardware required for installation.
21
-
-
FOR PUBLIC TOILETS
-
-
-
Supply, installation and commissioning of ''UNDER COUNTER BASIN, Model No;CNS-WHT-701- Jaquar or equivalent. Item includes all hardware required for installation.
6
-
-
Supply, installation and commissioning of ''QUARTER TURN PILLAR COCK, Model No;VGP- 81001- Jaquar or equivalent. Item includes all hardware required for installation.
6
-
-
Supply, installation and commissioning of ''WALL HUNG WC, Model No;FLS WHT-5953PPSM- Jaquar or equivalent. Item includes all hardware required for installation.
4
-
-
Supply, installation and commissioning of ''URINAL, Model No URS-WHT-13261- Jaquar or equivalent. Item includes all hardware required for installation.
3
-
-
Supply, installation and commissioning of ''URINAL PARTITION, Model No 1810-UC / 1110 UC- Jaquar or equivalent. Item includes all hardware required for installation.
3
-
-
Supply, installation and commissioning of ''HAND DRYER, Model No HDR-SSF-AK-2807- Jaquar or equivalent. Item includes all hardware required for installation.
4
-
-
Water Supply
-
-
-
P.W.D. ITEMS:-
-
-
-
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. .
-
-
-
Internal Work - Exposed on Wall
-
-
-
20 mm outer dia pipes.
50
-
-
25 mm outer dia pipes.
40
-
-
32 mm outer dia pipes.
50
-
-
40 mm outer dia pipes.
60
-
-
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge.
-
-
-
Concealed work oncluding cutting chases and making good the walls etc.
-
-
-
20 mm outer dia pipes.
276
-
-
25 mm outer dia pipes.
110
-
-
32 mm outer dia pipes.
55
-
-
Providing and fixing brass stop cock of approved quality complete.
-
-
-
15 mm nominal bore
20
-
-
20 mm nominal bore
20
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm dia nominal bore
10
-
-
32 mm dia nominal bore
10
-
-
40 mm dia nominal bore
20
-
-
50 mm dia nominal bore
20
-
-
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
40000
-
-
Providing and fixing C.P.brass bib cock of approved quality conforming to IS : 8931.
25
-
-
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms.
-
-
-
15 mm nominal bore.
20
-
-
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a) 15 mm nominal bore
-
-
-
15 mm nominal bore
60
-
-
External Plumbing
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
360
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
coupler
-
-
-
110 mm
18
-
-
Bend 87.5°
-
-
-
110 mm bend
18
-
-
External Work
-
-
-
50 mm dia nominal bore.
200
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
20
-
-
50 to 80 mm nominal bore
10
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
50 mm dia nominal bore
10
-
-
Drainage External
-
-
-
Providing and fixing square-mouth S.W. gully trap Class SP-1 complete with C.I. grating brick masonry chamber with grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
150x100mm size P type
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
5
-
-
180x150mm size P type
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
3
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
-
-
-
250 mm dia R.C.C. Pipe
100
-
-
300 mm dia R.C.C. Pipe
100
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3
(1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg).
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
8
-
-
Inside size 120 x 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
1
-
-
Extra for depth for manholes
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
2
-
-
Size 120x90 cm
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
1
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
15
-
-
Providing and constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design.
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
8
-
-
Providing and constructing brick masonry chamber for undergroundCI inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
9
-
-
Inside dimensions 500x700 mm and 45 cm
deep for pipe line with one or two inlets :
-
-
-
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 deep for pipe line with one or two inlets :
10
-
-
Inside dimensions 600x 850 mm and 45 cm
deep for pipe line with three or more inlets :
-
-
-
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
5
-
-
Extra depth beyond 45 cm of brick masonry chamber:
-
-
-
For 455x610 mm size
-
-
-
With common burnt clay F.P.S (non - modular) bricks of class designation 7.5
1
-
-
For 500x700 mm size
-
-
-
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
1
-
-
For 600x850 mm size
-
-
-
With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
1
-
-
Rain Water Harvesting
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
Rocky strata including Boulders
-
-
-
300 mm dia
110
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
150 mm nominal size dia
110
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge.
15
-
-
FIRE FIGHTING SYSTEM
-
-
-
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
450 lpm at 35 m Head
1
-
-
PIPES & ACCESSORIES
-
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
100 mm dia
20
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
Single headed Gunmetal
4
-
-
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets
conforming to IS 13095 of following sizes as required :
-
-
-
100 mm dia
4
-
-
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :
-
-
-
40 mm dia
4
-
-
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete required.
4
-
-
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
100 mm dia
1
-
-
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
100 mm dia
1
-
-
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
Gun Metal
8
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required; -20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 -20 mm nominal internal dia gun metal globe valve & nozzle. -Drum and brackets for fixing the equipmets on wall.
-Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
30 mtrs
8
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
Gun Metal
8
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904
as required :
-
-
-
2 way - 100 mm dia M.S. Pipe
1
-
-
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
-
MISC - NON SCHEDULE ITEMS
-
-
-
Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15863-2006 & ISO -9001 complete as required capacity -6 kg
4
-
-
Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements