Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 May 2022
Closing Date25 May 2022
Tender AmountRefer Documents
Costs
EMD
₹ 69,480Document Cost
₹ 800Tender Fee
Refer Documents
Summary
Construction Of Executive Engineer Office (jal Shakti Division Thanakalan) In Tehsil Bangana District Una And Jal Shakti Sub-division Basal In Tehsil And Distt Una (hp)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_HPIPH_60531_1Bid Award Id
ViewTender No
UNA-UNA00-733Tender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material in all leads & lifts..
-
-
-
Foundation, footings basis of columns etc. and mass concrete.
114.49
-
-
flat surfaces such as soffits of suspended floors, roofs, landings and like floors etc. upto 200mm in thickness
148.8
-
-
Columns, pillars, posts and struts Square, rectangular or polygonal in plan.
61.95
-
-
Stair cases with sloping or stepped soffits excluding landing.
6.28
-
-
Beams, cantilever, girders and lintels.sides and soffits of beames beam haunchings, cantilevers,bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.
40.15
-
-
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.
204.98
-
-
PLAIN CEMENT CONCRETE
-
-
-
Providing and laying cement concrete work 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size & curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.
18.81
-
-
RCC:-
-
-
-
Providing and laying cement concrete work 1:1.5:3 (1: cement :1.5 sand ; 3 graded stone aggregate)20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work.
-
-
-
Foundation footing bases of columns and the like and mass concrete.
29.33
-
-
Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level.
18.6
-
-
In column, pillars, posts and struts upto floor two level
5.58
-
-
Stair cases ( except spiral stair cases) excluding landing but including preparing of the surfaces and finishing of nosing upto floor two level.with sloping or stepped soffits excluding landing.
2.98
-
-
Lintels beams girders bressumers and cantilevers up to floor to levels.
12.49
-
-
Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material in all leads & lifts
5977.78
-
-
Ist class brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.
29.79
-
-
1st class Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4(1 Cement : 4 Sand) within all leads and lifts complete as per the direction of Engineer-In-Charge
109.74
-
-
Providing wood work of 2nd class Deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.
1.56
-
-
Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hinges with necessary screws II class Deodar Wood 40mm thick including carriage of material in all leads & lifts.
55.4
-
-
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 2nd class Deodar wood 40mm thick including carriage of material in all leads & lifts.
46.8
-
-
Providing and fixing M.S. Grill of required patterns in woodan frames of windows etc with MS Flats square or round bars with round head bolts and nuts or by screws including carriage of materials in all leads & lifts. As per direction of Engineer-in-charge. plan grill.
498.08
-
-
6 mm thick cement plaster to ceiling in C.M.1:3 (1Cement,3 sand) with in all leads and lifts complete in all respect.
117.42
-
-
20 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:4 (1Cement:3 sand)including carriage of material in all leads & lifts.
537.09
-
-
15 mm Cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 (1 Cement: 4 Sand) including carriage of material in all leads & lifts.
155.05
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement in all leads and lifts and as per the direction of the Engineer-in-Charge 40 mm thick including carriage of material in all leads & lifts.
125.75
-
-
Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick(stairs steps)
12.63
-
-
Providing and fixing 10mm thick antiskid/polished water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x120mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) ointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.(fixed with 5mm spacer,filled with epoxy) (Toilet Floor)
9.7
-
-
Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement:3 sand) finished with flush pointing in white cement including carriage of material in all leads & lifts.
104.96
-
-
White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.
37.18
-
-
Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board (Bhuttan make)with butt joints & fixing with nails & screws etc including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge .(centuary/virgo/green make)
19.25
-
-
Providing and fixing 19mm thick water proof commercial board in shutter for cub board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts..Centuary/virgo/green make)
11.59
-
-
Providing and fixing 6mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.
19.25
-
-
Providing and fixing stainless steel stands for base of cabinets 7x7cms and 10 cms high,fixed wioth screws including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
8
-
-
Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts .
30.84
-
-
Providing and fixing bright finished Aluminium sliding door-bolts with nuts and screws etc. complete in all respect including carriage of material in all leads & lifts.
-
-
-
250X16mm
1
-
-
250X16mm
20
-
-
Providing fixing bright finished Alumionium tower bolts (barrel type)anodized transparent or dyed to required colour & shade with necessry screws etc. complete. in all respect including carriage of material in all leads & lifts.
-
-
-
300x10mm
22
-
-
150x10mm
58
-
-
Providing and fixing bright finished Aluminium handles anodized transparent or dyed to required colour & shade with necessry screws etc. with. complete. in all respect including carriage of material in all leads & lifts .
-
-
-
125 mm
22
-
-
100 mm
29
-
-
Providing and fixing bright finished hard drawn hooks and eyes complete in all respect including carriage of material in all leads & lifts. 150 mm
29
-
-
P/F bright finished brass Godrej make mortie lock with all acessories complete. in all respect including carriage of material in all leads & lifts .
2
-
-
P/F Heavy duty hydraulic door closer Godrej make complete. in all respect including carriage of material in all leads & lifts .
10
-
-
Providing and fixing 40x3mm flat iron hold fast 40 cm.long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm of 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size)complete in all respect including carriage of material in all leads and lifts.
84
-
-
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In MS hollow square/rectangluer pipes (tata make)beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts.
9.9
-
-
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge.(Porch/Mumty roof)
11.83
-
-
Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges .
7.15
-
-
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominalsize) complete in all respect including carriage of material in all leads and lifts.
12.29
-
-
Stone filling behind retaining walls complete in all respect including carriage of material in all leads and lifts .
32.65
-
-
P/F M.S.BP Sheet 1.66 mm to 2mm thick TATA MAKE in eves board/facia/soffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in -Charge ( Base member of steel work shall be measured & paid separtely)
7.15
-
-
Providing and fixing on wall face PVC (D-Plast) rain water pipes with accessories of working pressures not less than 4.5 kg/Sqm i/c filling the joints with approved adhesive complete. (100mm dai pipes) including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
9.15
-
-
Providing and fixing M.S. holder bats clamps of approved design of CI or SCI embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size) and cost of cutting holes and making good the wall etc. 100 mm dia for PVC pipe.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
9
-
-
Providing and Fixing Steel Hollow Square pipe (0.90 Mtr. Height) in stairght length fixed with stainless steel flat/flat round at top and vertical and horizontal balusters including fixing with necessary scerws complete as per the Direction of Engineer-in-charge.
6.7
-
-
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts .
49.14
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts .
280.8
-
-
Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts.
280.8
-
-
Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to given an even shade over and including priming coat with distemper primer of approved brand and manufacture of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.within all leads and lifts complete as per the direction of Engineer-In-Charge
280.8
-
-
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts .
155.05
-
-
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts .
280.8
-
-
Polishing two coats with PU(poly utherene) polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect including carriage of material in all leads & lifts .
102.2
-
-
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.complete including carriage of material in all leads & lifts Readymixed paint brushing with wood primer pink .
102.2
-
-
Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint
102.2
-
-
SC/O Septic Tank for AE Office Basal.
-
-
-
Excavation in foundation. and trenches( for pipes & pits in all depths etc.) in all kind of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock (where blasting is prohibited) and saturated soils, stacking the excavated earth within all leads & lifts, clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths, sides of foundation and trenches etc. consolidating each deposited layer by ramming and watering and then depositing of all surplus excavated earth as directed by Engineer-in-charge within all leads and lifts.
33.27
-
-
Providing and laying cement concrete 1:3:6 ( 1 cement,3 approved sand,6 quarry stone aggregate 40 mm nominal size )and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads and lifts
1.51
-
-
Providing and laying cement concrete work 1:1.5:3 ( 1cement:1.5 sand : 3 stone aggregate) 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work including carriage of material within all leads and lifts.
-
-
-
Foundation & plinth.
2.01
-
-
Suspended floor, roof landing and shelves and their support balconies beams, girders bressumers and cantilevers upto floor two level.
1.53
-
-
Walls ( Any thickness but not less than 0.10 mtrs thickness) including attached buttresses, plinth and string courses etc. upto floor two level including carriage of material within all leads & lifts.
5.28
-
-
Ist class Half brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement:4 sand) including carriage of materials within all leads and lifts.
3.46
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in situ-reinforced concrete and plain concrete work in:
-
-
-
Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto 200mm in thickness within all leads and lifts.
9.28
-
-
Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pillares buttresses,plinth & string courses and the like including carriage of material complete in respects with all leads and lifts as per direction of Engineer-in-cherge of the site of work.
22.98
-
-
Providing tor steel reinforcement for RCC wrk including bending binding and placing in position complete upto floor two level.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
703.57
-
-
15mm thick cement plaster with cement mortar 1:3(1 cement:3 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering all heights including arises, internal rounded angles chamfers and/ or rounded angles not exceding 80mm in girth and finished even and smooth i) Upto floor two level within all leads and lifts complete as per the direction of Engineer-In-Charge
6.92
-
-
Providing and fixing 200mm wide CI rungs in all leads & lifts and to the enditre satisfaction of the Engineer-in-charge.
8
-
-
Providing and fixing man hole cover with frame having frames size of 560mm internal dia,including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing vent opening including cowl with mesh in the top of the tank including carriage of all leads and lifts and as per the direction of the Engineer-in-charge.
2
-
-
Water Supply and Sanitary installation
-
-
-
P/F vitreous china water closet squatting pan 580 mm size..Orrissa Pattern including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing white vitreous china wash down water closet (European type W.C.pan) withintegral 'P'or 'S' trap including jointing the tap with soil pipe in CM 1:1 of Parryware / Hindware/ CERA,( seat and cover to be measured and paid for seperately) including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
Anglo Indian Universal Closet
2
-
-
Providing and fixing 100mm (One hundred millimetres) size P or S trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( One cement : One sand) sand cast iron.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
3
-
-
Providing and fixing 10/12.50/15 liters vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve with polythene float C.P brass handle, unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters. of Parryware / Hindware/ CERA including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
3
-
-
Providing and fixing plasic seat(solid/Hollow type) and cover for wash down water closet with C.P. brass and hinges and rubber buffers solid type White plastic seat of Parryware / Hindware/ CERA.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing china wash basin with single hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes and making good the same with excluding fitting fla back 630mm x450mm of Parryware / Hindware/ CERA.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing C.P. brass waste for wash basin or sink 32mm dia of Jaquar /JAL make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing china pedestal for wash basin complete recessed at rhe black for the reception of pipes and fittings of Parryware / Hindware/ CERA make .including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing 32mm dia lead waste pipe for wash basin or sink including brass check nut. of Jaquar make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing 600mm x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood and fixed to wooden plugs with C.P. brass screws the washers.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing C.P. brass towel rail complete with CP brass brackets fixed to wooden plugs with C.P. brass 600x20mm of Jaquar /JAL make..including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing 600x120mm glass shelf with C.P. brass brackes and guard rail complete fixed o wooden plugs with C.P.brass screws of Jaquar /JAL make..including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with CP brass screws complete of Jaquar /JAL make.. including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
2
-
-
Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Jaquar /JAL make..including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
6
-
-
Providing and fixing C.P. brass bib tap with capstain head 15mm dia of Jaquar /JAL make..including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
10
-
-
Providing and fixing C.P. brass angle cock 15mm dia without nuts and pipe complete of Jaquar /JAL make..including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
3
-
-
Providing and fixing PVC connection pipe with unions 45cm. Long and 15mm.nominal bore of Jaquar /JAL make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
22
-
-
Providing and fixing brass full way valve with wheel 15mm dia without nuts and pipe complete of Jaquar /JAL make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 15 mm dia
2
-
-
ii) 20mm dia
3
-
-
Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
6
-
-
ii) 110mm nominal size
6
-
-
Providing and fixing PVC single equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
5
-
-
ii) 110mm nominal size
5
-
-
Providing and fixing PVC double equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
4
-
-
ii) 100mm nominal size
5
-
-
Providing and fixing PVC Collars ISI Marked including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75 mm nominal size
20
-
-
ii) 100mm nominal size
15
-
-
Providing and fixing PVC Plain bend ISI Marke including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
12
-
-
ii) 100mm nominal size
10
-
-
Providing and fixing PVC Cowl including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
6
-
-
ii) 100mm nominal size
7
-
-
Providing and fixing stone ware gully trap grade-A complete with C.I. grating brick masonry camber in cement mortar 1:5 ( 1 cement: 5 sand) C.I. cover with frame 300x300mm size wt. of cover should not be less than 4.53 kg. and frame 2.72 kg.. including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (midium grade) tube fitting and clamps including making good the wall ceiling and floor. including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
15 mm nominal bore.
85
-
-
20 mm nominal bore.
55
-
-
Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 75mm nominal size
80
-
-
ii) 100mm dia nominal size.
35
-
-
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in and including cement concrete blocks 10x10x10cm. Of 1:2:4 (1 cement : 2 sand : 4 stone graded stone aggregate 20mm nominal size) and cost of cuting holes and making good the wall etc. 100mm diameter for C.I. pipe.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
75mm dia meter
6
-
-
100mm dia meter
5
-
-
Providing and fixing 75mm PVC floor trap ISI marked of self f cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
15
-
-
Providing and placing water tank of make sintex having of capacity of 2000 ltr. With necessary fittings including over flow pipe etc. and ball valve with cover and locking arrangements including make of required size for inlet and outlet and inside paint in of good quality complete including hoisting including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing 100mm sand C.P. grating for gully floor Cera /Hindware make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
12
-
-
Providing and fixing CP brass Jet Jaquar/Jal make with connection pipe and other fitting for (European Type) WC pan complete.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
4
-
-
Providing and fixing high pressure PVC pipes ISI marked including fixing with approved adhesive etc.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
-
-
-
i) 150mm nominal size
6
-
-
Providing and fixing bowl pattern urinal URS -WHT-0704 without sensor size 710x485x300mm and Senser SNR-CHR-51097 Sensotronic sensor flushing valve for urinal with complete kit suitable for urinal URS -WHT-0704 of Jaquar make i/c connection the urinal with based pipe by means of flat back type white lead mixed with chopped hemp ( waste pipe to be measured & paid for separetly )including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing automatic flushing cistern with a pair of C.I. or mild steel brackets complete with fitting suchCI syphonic apparatus mosquitos proof ld CP brass union , unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters. including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing Division plate for urinals 700x340x120mm vitreous china Cera /Hindware make.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing of KENT supreme RO UV UF Mineral purifier with storage tank capacity of 15 Ltr. To give user clean And safe drinking water with higher concentration through film tech 1812-75 GPD and the purification capacity tested on ra water shall be with TDS level of 750 PPM. The UV lamp shall be 11 watt the main filter used in this water purifier shall be sediment activated carbon, post carbon and carbon block including all accessories including installation charges with six month warranty including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
1
-
-
Providing and fixing water cooler Usha 20 ltr. Stainless steel 2020-SS water cooleer (ISI Marked). The cooler shall be desined for grater safty and operational conveniuns, having low power consumption and the quality of grooved copper tubes and having high effeciency compressor, blue fins on condencer coil give the cooler a long life. it must be enviorment frendly and new age refrigant. the body material must be rugged stainless steel/galvanised steel with float valve, adjustable padestal and other cpmponents complete including installation at site as per the direction of the Engineer-in-Charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements