Himachal Pradesh Irrigation And Public Health Department Tender

Foundation & plinth base of column and like mass concrete

In wall any thickness i/c attached, buttresses, pillasters & their caps & bases &string courses etc.upto floor two level.

In suspended floor, roofs, landing & shelves & their suport balconies, beams, gorder bressumer and cantilevers uotp floor two level

Providing and laying cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size e/c cost of form work & reinforcement ror rcc work in suspended floor,roofs,landing &shelves & their support blconies, beams, girders. Bressumers & cantilever upto floor two level.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm. So as to give fair finish including centring shuttering strtting and proping etc. with wooden battens and balies height of proping and centring below supporing floor to ceiling not exceeding 4mtrs and removal of same for insitu-reinforcred concrete & plain concrete work in

Flat surface such as soffits of suspended floors roofs, landing and the like.

Vertical surfaces such as walls ( any thickness) partitions and like including attached Pillasters,buttresses,plinth and string courses and the like.

Providing and fixing of .mild steel/tor steel reinforcement for rcc work i/c bending,binding & placing in position complete in all respect within all leads and lifts and as per directions and satisfaction of Engineer in Charge.

Applying Cement slury on R.C.C. slab or Cement concrete work including roughening cleaninig of the concerete surfaces complete

Providing and Fixing CI Rungs complete in all respect within all leads and lifts and as per directions and satisfaction of Engineer in Charge.

PROVIDING & FIXING of Precast SFRC Manhole cover having size 560mm intenal dia (MEDIUM DUTY) IS 12592:2000 complete in all respect within all leads and lifts and as per directions and satisfaction of Engineer in Charge.

2nd class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6(1 cement 6 sand ) complete in all respect within all leads and lifts and as per directions and satisfaction of Engineer in Charge.

20mm thick cement plaster in two coat of rough sides of bricks/concrete stone wall for interior plastering upto floor two level including arrises, internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in Cement mortar 1:6(1 cement: 6 sand) complete in all leads and lift as specification and direction of the Engineer-in-charge.

Designing, Constructing, Testing & Commissioning R.C.C. Circular Flushing Storage Tanks Flat Roof Type as per capacity given below at various stages/sites including excavation in all kinds and types of strata, soil strata including dewatering in M30 design mix in foundation, walls, bottom slab , roof slab/flat with smooth finishing in 1:3 inside the tank, all alied Civil Works, Site development, cutting/excavation in all kinds of soils, C/o PCC/RCC Retaining walls, Breast walls, refilling and disposing of surplus stuff with in all leads and lifts, labour and material charges. The job also includes such as MS outside ventilator with mosquito proof wire mesh, complete ,SFRC manhole covers including frames and covers (medium duty) with proper locking arrangement water level indicator, RCC frames for all valves ventilating shafts shall also be provided including all leads and lifts as per entire satisfaction of Engineer-in-Charge. The tanks shall be hydraulically tested for water tightness all works shall be conforming to relevant IS code with all latest revisions. The rates quoted by the contractor shall be for the complete work. All ancilliary works and accessories required to make the system fully functional shall be included in the cost of work. Nothing extra shall be paid on this account. The work shall include supplying of Five sets of structural design after testing the bearing capcity of soil and drawings, etc complete as directed by engineer in charge as per relevent data sheet and scope of work. (Refer to data sheet No-1)

C/o Flushing Tank 8000 ltr. Capacity

C/o Flushing Tank 12000 ltr. Capacity

Laying jointing and testing of D.I. Pipe spigot and socketed pipe with CML ( SBR tyton push on joints) complete in all respect as per IS 8329-2900 class K-7 as per standard dimension, weight and test pressure complete in all respect as latest ammendments or addition.

150mm dia

200mm dia

Providing, Laying, Jointing & Testing of HDPE pipe of grade PE-80, PN-8 (confirming to IS -14333 with upto date ammendments) in proper position by butt fusion jointing procedure i/c hydraulic testing as per relevent IS code complete in all respect i/c all material for jointing for jointing procedure like butt fusion welding Machine with hydraulic jack, top loading clamp, etc., pump accessories for hydraulic testing and all labour as directed by the Engineer in Charge as confirming to IS 7634(Part-II) 2012 with upto date ammendments.

160mm dia

Providing and Fixing of double Socket Flange Y Tee 150x150mm dia as per IS 8329-2900 complete in all repect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge of the following bore.

Providing and Fixing of DI Plug 150mm dia complete in all repect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge of the following bore.

Providing and Jointing of Tyton (Push on Joint) to Ductile iron pipe and fitting i/c testing of the joint, cost of rubber gasket (EDPM Quality) confirming to IS 3382 (Latest edition/ammendments) complete in all repect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge of the following bore.

Providing and Fixing of all Socket DI Tee/ Cross as per IS 8329 or latest addition ammendments i/c cariage of material complete in all repect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge of the following bore.

Providing, Laying jointing & testing of Galvanised Mild Steel Tubes (LG) including all fittings such as socket, union tee nipples elbow etc. as per IS 1239 with upto date ammendments (earth work in trenches to be measured and paid for separately) as per the direction and satisfaction of Engineer-in-Charge of the following nominal bore.

65mm nominal bore

Repair of Panchayat Path complete in all repect within all leads and lifts as per the direction and satisfaction of Engineer-in-Charge of the following bore. (Refer to data sheet No-2)