Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Irrigation Work
Eprocure
Opening Date21 Jun 2024
Closing Date1 Jul 2024
Tender Amount₹ 30,83,269
Costs
EMD
₹ 53,749Document Cost
₹ 400Tender Fee
Refer Documents
Summary
Improvement Of Tubewell At Mandwara (near Barrier) Tubewell At Guglehar, Irrigation Scheme Andoura Upper And Lower In Tehsil Ghanari Distt. Una (hp).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPIPH_89491_1Bid Award Id
ViewTender No
JSV/FPDG/CB/EA-I/1200-39 dated 21.06.2024Tender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2nd.class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:4 (1cement :4 sand) in all lead and lifts and as per the direction of the Engineer-in-Charge.
18.03
-
-
1st. class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement : 6 sand) in all lead and lifts and as per the directions of the Engineer-in-Charge.
15.47
-
-
1st. class brick work using common burnt clay building bricks in super structure in cement mortor 1:6 (1 cement :6 sand) in all lead and lifts and as per the direction of the Engineer-in-Charge.
10.9
-
-
Providing and fixing presed steel door frames manufactured from commercial mild steel of 1.25 mm thickness i/c chinges fans lag joints bend and if required thresh hold of mild steel angle etc. in all leads and lift to the entire satisfaction of Engineer-in-charge. Profile-A
25.65
-
-
Providing and fixing wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. in all leads and lift to the entire satisfaction of Engineer-in-charge. 2nd. class deodar wood 40mm thick.
5.81
-
-
Providing form work with steel plates 3.15 mm. thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shutering, strutting and propping etc. with wooden battens and ballies, height of propping and
centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:
-
-
-
Flat surfaces such as soffits of suspended floors, roofs,landings and the like. Floors etc.upto 200mm. in thickness within all leads and lifts as per direction of Engineer-in-charge.
23.84
-
-
Beams, cantilever, girders and lintles Sides and soffits of beams, beam haunchings cantilevers bressumers and lintles not exceeding 1 mtr. in depth in all height from floor in all leads and lift to the entire satisfaction of Engineer-in-charge.
8.45
-
-
Edges of slabs and breaks in floors and walls under 20 cm width.
35.72
-
-
Providing and laying cement concrete 1:2:4 ( 1cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :
-
-
-
Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level complete in all respect including all leads and lift to the entire satisfaction of Engineer-in-charge.
5.96
-
-
Providing Tor steel reinforcement for RCC work including bending binding & placing in position complete upto floor two level complete in all respect including all leads and lifts and to the entire satisfaction of Engineer-in-charge.
480.37
-
-
20mm Cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement: 6 sand) within all leads and lifts as per direction of Engineer-in-charge..
286.62
-
-
15 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level including arrises, internal rounded angle, chamfers and /or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:3 ( 1 cement :3 sand ) in all leads and lifts as per the direction of the Enginner-in-Charge.
105.08
-
-
6 mm cement plaster to ceiling in cement mortar 1:3 (1cement : 3 sand) within all leads and lifts and as per direction of Engineer-in-charge.
23.84
-
-
Flush Pointing on brick work with cement mortar 1:3 (1cement: 3 sand) raised and cut point within all leads and lifts and as per direction of Engineer-in-charge.
51.63
-
-
Providing plinth protection 50 mm thick cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) including finishing the top surface concrete smooth within all leads and lifts as per direction of Engineer-in-charge.
14.73
-
-
Cement concrete flooring 1:2:4(1cement:2 sand: 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement within all leads and lifts as per direction of Engineer-in-charge. 40mm thick.
29
-
-
Cement concrete flooring 1:2:4(1cement:2 sand: 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement within all leads and lifts as per direction of Engineer-in-charge. 50mm thick.
1.44
-
-
Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws within all leads and lifts as per direction of Engineer-in-charge.
45.36
-
-
Applying priming coat over new wood and wood based surfaces after and
including prepering the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink within all leads and lifts as per direction of Engineer-in-charge..
18.2
-
-
Painting two coats (excluding priming coat) on new wood and wood based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt ,dust and other foreign matter sand papering and stopping with enamel paint other than white complete in all respect as per the direction of the Engineer-in-Charge.
18.2
-
-
Providing 40x3 mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 mix( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size) within all leads and lifts as per direction of Engineer-in-charge.
18
-
-
Providing and fixing following anodized aluminium fitting of anodized transparent and shade with necessary secrew etc. complete in all leads and lifts as per the directions of Engineer-in-charge.
-
-
-
Sliding door bolts 300 x16 mm
1
-
-
MS tower bolt (barrel Type) 200x10 mm
2
-
-
MS tower bolt (barrel Type) 150x10 mm
6
-
-
MS Handle 125 mm
2
-
-
MS Handle 100 mm
6
-
-
White washing with lime on undecorated walls surface (Two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust mortar dist and other foreign matter complete in all respect in all leads and lifts and as per the direction of the Engineer - in- Charge.
23.84
-
-
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer with in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
58.33
-
-
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and
remains of loose powdered materials complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
279.92
-
-
Stone /boulder filling under the floors/ behind the retaing wall complete in all respect i/c all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
2.3
-
-
Providing under layer for plinth protection of 75 mm thick (unconsolidated )bed dry brick/ stone aggregate 40 mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground entire carriage of material and as per direction of the Engineer-in-Charge..
14.73
-
-
Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion loop,all as per standard design complete in respect .
1
-
-
Half brick work using common burnt clay building bricks in super structure above 1st. floor level in cement mortar 1 : 4 ( 1 cement :4 sand) of 2nd. Class bricks complete in all lead and lifts as per the direction of the Engineer-in-Charge.
57.14
-
-
Steel work welded in built up sections,trusses & framed work including cutting, hoisting & fixing in position & applying a priming coat of red lead paint In grating, framed, guards, bars, ladders, railing, brackets & similar works within all leads and lifts as per direction of Engineer-in-charge.
112.86
-
-
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant(HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light
point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of all material within all leads and lifts. Group "C"
12
-
-
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel Conduct along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core
copper conductor cable for earthing as required including carriage of materials within all leads and lifts.
55
-
-
Wiring for light plug with 2X1.5 Sq. mm PVC insulated heat resistant fleame retardant (HRFR) and low smoke single core (flexible) copper conductof cable in PVC casing & capping along with 1 No. 1.5 Sq. mm HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carrige of material with in all leads and lifts.
45
-
-
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.including carriage of material in -complete in all respect.with in all leads and lifts complete as per the direction of Engineer-In-Charge.
3
-
-
Supplying & fixing metal box of 180mm.x100mm.x60mm. deep sizes (nominal size)
on surface or in recess suitable for fixing phenolic laminated sheet covered in the front including Providing and fixing 5 pin 5/6 amps socket , outlet and 5/6 amps plano type switch connections painting etc. as required arriage of materials within all leads and lifts.:-
3
-
-
Supplying and fixing bakelite batten/angle holder including connections etc. as required:- including carriage of materials within all leads and lifts.
4
-
-
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible,cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-Ceiling Fan 1200 mm sweep, Category-A 1.5 Sq mm PVCinsulated copper conductor single core cable including carriage of materials within all leads and lifts.
2
-
-
Providing and fixing shock proof slim decorative extruded box fixture with domestic electronic ballast, snao-on mstallers suitable for 28 watt FTL (T5), complete with all accessories (excluding one No.T-5 Tube), connections, testing and commissioning etc. as required. 1 x28 watt-FTL(T58) (Category-A)
2
-
-
Supplying amd erection of 40/50/63 amps rating, 10 KA breakimg capacity, 240 volts, "C" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.
3
-
-
Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts on surface/recess completed with tinned, copper bus-bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification levels interconnections,phosphatized and power painted, including earthing etc. as required Bus bar 8 way. Double Door
1
-
-
Supplying and errection 6 Amps to 32 Amps rating 10 KA Breaking capacity 240 volts C Curves miniature cicuite breaker of following poles in the existing MCB, DB complete with connections testing and commissioning etc. as required Category "A", single pole.
8
-
-
Earthing with G.I. pipe earth, pipe 4.5 mtrs long, 40mm dia including accessories and providing masonry enclousres with cover plate having locking arrangement and watering pipe etc.( but without charcal coke and salt) complete as required including carriage of materials within all leads and lifts.
1
-
-
Extra using salt and charcoal for pipe earth electrode as required, including carriage of materials within all leads and lifts.
1
-
-
Supplying and laying 6 SWG G.I.wire at 0.50 mtr below ground level for conductor earth electrode, including soldering etc. as required including carriage of materials within all leads and lifts.
25
-
-
Providing, fixing & testing Street Light Fixture with CFL of 36 watt, copper ballast, G.I. Pipe bracket, complete in all respects.
3
-
-
Laying, jointing in trenches HDPE pipes of following dia and classes as per IS 4984, PE-80 and jointing the pipes through push type compression joints by hydraulically operated machines upto 110 mm diameter and butt fussion ( heat fusion process) above 110 mm diameter i/c necessary fitting, bends, tees & reducers fabricated in accoradance with IS 8008 & IS 8008 with latest ammendments & shall be provided as per site condiotions. Flanging of the pipes shall be made as & where required confirming to code IS 8008 & IS 7634, stub ends will be welded on pipes & MS flange shall be provided with slip on covered by epoxy coating/ plastic powder. The flanges should be confir to ANSI B 16.5 with necessary nuts & Bolts. Jointing shall be complete in all respect i/c testing at site upto entire satisfaction of Engineer-in-Charge.
-
-
-
160 mm dia HDPE pipe class PE-80, grade PN 4.00
1170
-
-
180 mm dia HDPE pipe class PE-80, grade PN 4.00
1535
-
-
Providing. and fixing Cast Iron Alfa valves of reputed & approved make like Kirloskar/Leader/Bouge etc. on distribution system of confirming to IS:780-1984 with latest ammendments of appropriate class & following dia metre and capable to with stand the requisite nominal seat pressure 10Kg/ Sqmt including testing and upto entire satisfaction of Engineer -in-Charge
-
-
-
200 mm dia
14
-
-
Providing, laying, jointing and testing in trenches of Galvanized GMSERW flanged pipes including cost of flanged bends of all degrees conforming to IS/ISO 3183-2007 Grade L-210 or A as per dimensions weight and test pressure mentioned below in a random length of 4 m-6m. The MS flanges are to be provided 5% of total joints as per table below conforming to IS:6392-1971 ( Latest upto date emendments) and welding of flanges with pipes as per IS:1369-1967 and compressed asbestos fiber jointing gaskets sheet not less than 3mm thick as per IS:2712-1965 & butt welded joints by considering minimum three layers. The welding of flanges to be done on both faces in two layers on outer face + one layer on inner face to make the joints leak proof and to the entire satisfaction of the Engineer-in- chage. The laying of pipes should be conformed to IS: 5822-1994 ( Earth work in trenches, MS flanges and butt welded joint to be measured and paid for seprately). The pipe shall have Zinc coating as per IS: 4736 in factory latest with upto date ammendements 200mm dia 4.80 mm thick.
-
-
-
GMSERW pipe 200 mm dia 4.80 mm thick
205
-
-
Providing, welding and fixing of MS flanges conforming to table as specified below of BIS code 6392-1971( Latest with upto date ammendments) welding of M.S. flanges on ( Two layers on inner face and one layer on outer face of each flange) with GMS pipes and bends on both ends. ( The GMS pipe to be measured and paid for separately. ) The welding of flanges should conforming to IS 816-1998 with electrodes as per IS 814-1997, Prov.& fixed with nuts, bolts of required size conforming to IS 1364, including providing & fixing 3 mm (Minimum) thick compressed asbestos fibre / synthetic rubber gasket conforming relevant BIS Code IS 2712-1965 in trenches complete in all respect and including entire carriage of materials in all leads and lifts as per the direct1on of the Engineer-in-Charge
-
-
-
MS Flanges 200 mm dia Table- 17
2
-
-
Providing circumferential butt welded joints to GMS pipe of following dia with three layers on each end of welding using 3 mm and 4 mm dia electrodes after levelling the pipe ends according to relevent ISI specification within all leads and lifts and to entire satisfaction of the Engineer-in-Charge complete in all respect Butt welding joints
-
-
-
GMSERW pipe 200 mm dia 4.80 mm thick
32
-
-
Supply of submersible pumping set of reputed make such as KSB/ Calama / BS/ Worthigton / Groundfos/ LUBI /Hindustan/ Sabar/Seerex/Johnston / Amrut, confirming to latest relevent BIS . The pump should be fitted with free fine impellers of suitable alloys as per BIS ; 5659-1978 with upto date amendments, suitable for raw / clear water having greased packed bearing and shell with wound stator on motor side and with shaft protection on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to submersible motor of same as that of offered submersible pump make confirming to BIS ; 9283-1979 with upto date amendments, totally dust and water proof for submersible pump, duly isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed, lubricated bearing and provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear and tear. It should also be fitted with a device to make up expantion of water with heating of motor. The pumpset should include water level guard i/c cable, errection clamps, cable clips and depth gauge etc. and suitable for opertion on data given below. Pumps :- Specifications i) Make ii) Model iii) No. of stages iv) Manufacter's certificate to be attached Performance i) Discharge ii) Head iii) Efficiency of Pump a) Duty Head b) (+) 10% Duty Head. c) (-) 15% Duty Head d) Performance curve to be attached b) Motors; Specification i) Make ii) Model iii) B.H.P iv) Speed v) Insulation
1
-
-
Discharge = (Q) 24.69 LPS
-
-
-
Total Head = ( H) 60.03 Mts.
-
-
-
a) SWL in Tubewell = 21.00 Mtr. bgl.
-
-
-
c) R.L. point of discharge =108.10 Mtr.
-
-
-
d) Seasonal fluctuation + draught condition + bowl assembly. = 9.00 Mtrs.
-
-
-
e) Drawdown in Tubewell = 14.00 Mtrs.
-
-
-
f) R.L of lowest point of pumpset installation = 56.00 Mtrs.
-
-
-
g) Static column lift
-
-
-
Rising main.
-
-
-
Length 205.00 Mtrs.
-
-
-
Dia meter. 200 mm
-
-
-
Class GMSERW Pipe
-
-
-
Column Pipe.
-
-
-
Length 54.00 Mtr.
-
-
-
Dia 125 mm
-
-
-
Class GMS. (M)
-
-
-
Pumping hours = 16.00 Hours
-
-
-
Altitude of installations above M.S.L. 100.00 Mtr.
-
-
-
Characteristic of water.
-
-
-
a) Temperature 20 Deg Cel.
-
-
-
b) Turbidity ________JTU.
-
-
-
c) Allkanity. ___________mg/ l Ca Co3
-
-
-
d) Size of solids ____________mm
-
-
-
e) others
-
-
-
Depth of T/well = 125.00 Mtr.
-
-
-
Dia of T/ well assembly 125 mm
-
-
-
Length of assembly pipe. meter .
-
-
-
Dia of housing pipe 300 mm
-
-
-
Length of housing pipe. 0.50 meter
-
-
-
OPERATING CONDITIONS.
-
-
-
Type of Current :- A.C.Three Phase.
-
-
-
Frequency:- 50 Cycles /Sec.
-
-
-
Rated Voltage 415 +/- 15 % Volts.
-
-
-
System of earthing:- Double Loop earthing as per BIS 3843-1987 Latest.
-
-
-
Speed of Revolution ____________ RPM 2900
-
-
-
MOTOR.
-
-
-
Ref. to BIS code BIS 9283-1979 with upto date amendments.
-
-
-
Type of enclosure of motor: As per BIS ; 4691-1985 ( latest )
-
-
-
Mechanical out put in H.P.
-
-
-
Class of insulation : Class B
-
-
-
The motor should be able to withstand initial current of 2.50 times the rated current for two minutes without suffering damages of permanent deformations.
-
-
-
PUMP
-
-
-
Ref. to BIS code ; BIS ; 5659-1978 with upto date amendments.
-
-
-
Driver Type: Electric driven.
-
-
-
Operating Range: -15 % to+10 % of Total head at duty point.
-
-
-
Delivery size of Pump : ________( To be quoted by tenderer.)
-
-
-
Providing ICTP Main Switch with HRC fuses of L&T/ Havells make and having capacity 30% extra of the operational rating as per IS : 13947- P I & II with upto date amendments. i) Make : ii) Type : iii) Capacity : 63 amp.
1
-
-
Providing MS Sheet steel fabricated floor mounted closed ( Almirah type) switch board including angle iron post of suitable height and size ISA 40x40x6 mm duly painted with sheet of 16 gauge comprising and capable of mounting the following accessories with all internal connections. Panel/ Switch Board i) Drawing. ii) Layout Plan
1
-
-
MCB of kilburn / L&T/ Havells make of suitable capacity on incoming feeder with or without initial oil filling as the case may be with neutral linked under voltage releases as per IS ; 2516-1985 with upto date amendments. i) Make : ii) Type : iii) Range 63 amp. iv) Capacity
1
-
-
ELR of recommended make L&T /Havells as per IS ; 2516-1985 with up to date ammendments and of suitable range which should have control box , operating handle & trip / reset bush button on / off of indicators, reindicating off spring condition of the circuit breaker for over current protection. The circuit should be equiped with magnet thermal release with metallic tape CTS. It should also be fitted with earth fault for tripping of breaker on occurence of Earth fault. ELCB i) Make : ii) Type : iii) Range 63 Amp. iv) Capacity
1
-
-
The voltage monitor Relay 3 phase with all protection and usual indicator and electric siren against single phasing, low voltage, high voltage, reverse phasing, overloading and phase voltage difference voltage monitor Relay as per IS; 3842 ( Latest Edition )i) Make : ii) Type : iii) Range 0-500.
1
-
-
A.C. supply, voltmeter of recommended make A.E./ L&T of suitable range with selector switches as per IS ;1248-1983 with latest amendments. Voltmeter i) Make : ii) Type : iii) Range 0-500.
1
-
-
AC supply ammeter of A.E / L&T make of suitable range with selector switches and CIS operated as per IS :1248 ( P-I&II ) -1983 with upto date amendments. Ammeter i) Make : ii) Type : iii) Capacity 60 Amp.
1
-
-
Bus bar chamber having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current, one copper bar of half the rating of full length for neutral phase as per IS ; 8084-1976 and IS : 11353-1985 read with BIS ; 5578 -1985 with upto date amendments including Bus bar chamber. 3 phase indicators i) Make : ii) Type : iii) Rating
1
-
-
Providing Hour run meter of recommended make of suitable capacity as per IS :722 (Latest edition) i) Type ii) Make iii) Range
1
-
-
Three phase indicator lamps complete with toggle switches for individual motors as per IS 3452 (P- I&II ) with upto date amendments. 3 Phase indicators
1
-
-
Capacitor of BHEL / L&T make as per IS ; 2834-1968 with upto date amendments, to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code ( of Seimens / Glocter/ IEC make) from bus bar chamber to capacitor as per IS : 4064-1978 with upto date amendments .Rate of capacitor will be approved by HPSEB. i) Make : ii) Type : iii) Range. 6 KVAR
1
-
-
Providing suitable oil immersed star delta starter of L&T/ Havell's /BHEL make as per IS :13947-II with upto date 'amendments for Squirrel cage / Slipring motor mounted on panel board with magnetic 'type overload release and dashpot, time lag, under voltage release, with or without 'initial oil filling as the case may be with single phase preventor as per IS ;1248 ( P-V ) 1983 with up to date amendments. Single Phase Preventor i) Make : ii) Type : iii) Range.
1
-
-
Providing and fixing double flanged Cast iron Sluice valve of Leader / Kirloskar /LP/RG Brand make for the delivery line of pump and capable of withstanding the normal seat pressure and as per IS :- 780-1992 with latest ammendments i) Make : ii) Type : iii) Make :- Cast Iron Class PN-1.60 for Column Pipe 125 mm dia
1
-
-
Providing and fixing double flanged swing type cast Iron Reflux valve of Leader/ Kirloskar/Kartar / LP/RG Brand make having Bye pass arrangement on the delivery line of the Pump and capable of 'withstanding normal Seat Pressure as per ISI:5312 Part-1 with latest ammendments i) Make : ii) Material : Cast Iron iii) Class PN-1.60 For for R/main 200 mm dia.
1
-
-
Providing and fixing pressure gauge of Prega / Precision make complete with all accessories such as stop cock, copper tubing as per IS ; 3624-1987 with upto date amendements. i) Make :
1
-
-
Supply of PVC jointless, flat water proof cable with copper conductor as per BIS 694-1998 latest with upto date ammendments of Havells/ Finolex make suitable for the pumpsets offered from MCB to motor including all other electrical equipments / accessories such as thimble, flexible pipe, solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor. The type, size and make shall be subject to approval of HPSEB authorities. i) Make : Finolex/ Havells ii) Size 3x 16.00 mm2 iii). type- IV capacity V Core-3
108
-
-
Lowering of GMS Column pipefor assembly 125 mm dia including MS flanges' of Table 17 as per IS : 6392-1971 with upto date amendments, rubber/asbestos gasket of min. 3mm thickness as per IS 2712-1979 and required numbers of nuts and bolts as per IS ;1364-1983 . The Column pipe shall be as per relevent IS Code and to withstand 1.50 times total head stipulated under item No. 69 . The Column pipe should be extended upto 5 mtr. beyond the outer wall of the pump house in the direction of Rising main . The Column pipe should be properly jointed with the Rising main including all necessary accessories like increaser / reducer, flanges, bends etc, including supporting clamps (2Nos.) at the top of T/well assembly, and as per the direction of Engineer - in - Charge. (The pipe shall be supplied by the Department free of cost from Divisional Store Badoh(Gagret). Column Pipe 125 mm dia GMS pipe (M)
54
-
-
Installation of all items appearing as above as per the systematic drawing attached with the documents or as per the direction of Engineer - in- charge.
1
-
-
Providing and laying copper PVC insulated armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 (P-I ) 1988 or latest with upto date amendments of Seimen /Gloster / IEC / ICC / EICO / National / Grandlay /Finolex/ Havells make including all other accessories such as thimble, flexible pipes, solder nuts and bolts, cable glands etc. laid in pipes of trenches under floor. Armoured Power Cable A) Supply Side From meter of HPSEB to Bus Bar and Switch) i) Size 25.00 mm2 ii) Make Finolex/Havells. iii) Type iv) Capacity v) Core 3 Motor side 16.00 mm2.
1
-
-
Providing and fixing double loop earthing with G.I. plate 600 mmx600mmx6.30 mm thick electrode complete with material such as thimble, nuts and bolts, charcoal, salt, common as per IS ; 3043-1987 with upto date amendments for motors and other electrical equipments and digging of pits etc. complete in all respect as per the dirction of the Engineer - in - Charge. i) Coper Flat 25x3 mm 15HP to 50 HP.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements