Himachal Pradesh Irrigation And Public Health Department Tender

Supply and fixing submersible cable 6.00mm2 to submersible sets .including entire carriage of material upto all leads and lifts.

Supplying and fixing supporting clamps 80mm dia to submersible pump sets including entire carriage of material upto all leads and lifts.

65 mm

Providing and fixing double flanged C.S Sluice valve of Leader/Kirloskar/KSB valve make and of 80mm dia for delivery line of the pump and capable of with standing normal sheet pressure as per BS 1414/API 600 with upto date amendment for Class ASA-150 as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

65 mm

Providing and fixing double flanged C.S NRV of Leader/Kirloskar/KSB valve make and of 80mm dia for delivery line of the pump and capable of with standing normal sheet pressure as per BS 1868/API-6D with upto date amendment for Class ASA-150 as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

65 mm

Supply and fixing stainless steel rope wire (minimum 5 mm thick excluding insulation thickness) suitable to wear the weight of motor pump, riser pipe etc.

Providing & laying at site double loop earthing with copper/ G.I. plate 600x600x3mm thick electrode complete with material such as charcoal, common salt, GI pipes, thimbles, nuts & bolts, digging of pits, GI wiring & 25x5mm G.I. strips of required capacity conforming to BIS 3043-1987 latest with up to date amendments suitable for above motors & other electrical equipments i/c cost of carriage of material in all leads & lifts & as directed by Engineer -Incharge.

Providing chain pulley for lifting of submersible pump heavy duty 3 tonne capacity complete with tripod make with G.I. pipe and U clamp.

Supplying installation Testing and Commissioning of Gen Set of Kirloskar/ other approved standered make Silent Dg Set Comprising of air colled Diesel Engin Suitable to the requirement of the Pumping machinery altreenator rated at 3Phase 415 volt 50Hz 0.8 P.F @ 1500 RPM both mounted and aligned on a common M.S Base frame complete with MS fuel tanki, Gen. Set AMF Panel, Residental Exhaust Silenceer AVM pade fitted on base fram 1No. 12Volts D.C. battery (Exide/Tata) with battery leads, Ist fill of lubricated oil all housed in sound proof acrostic enclosure. The panel board shall be accommodated with main incomer 100ampere MCCB, Ampere volt meter, Selector switces. C.T. intemal wiring with sutiable copper wire complete pannel AMF type Sutible to Supply power to run rquired BHP submersible pumps installed at an altiude of 3600m above MSL to Supply Power.

Providing laying and fixing of aluminium conducter, PVC insulated and PVC sheathed armoured /XLPE power cable, working voltage 1100 volts grade on surface etc, of the requried size 3.5*50mm2.

Providing and fixing100 ampere change over switch of makeL&T as required complete in all respect including all connections with thimbles etc, complete.

Providing double loop earthing arrangment with copper earth plate 600mmx600mmx 3mm thick including accessories i.e. G.I. pipe copper plates ,copper stripe and wire for looping and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc. (butt without charcoal or coke and salt) complete as required .

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required .

Providing and fixing 25mmx5mm G.I. strip on surface or in recess for earth connection etc. as required.

Excaation in foundation trenches etc in earth work depth up to 1.5 metre and ramming and laying of 10 cm thick cement concrete 1:4:8 ( 1cement 4 sand 8stone aggregate 25 mm nominal size )in foundation and pinth including cement concrete flooring 1:2:4 ( 1 cement 2 sand 4 stone aggregate 20mm nominal size ) finished with floating coat of neat cement 40mm thick (i) foundation size 2.0m X1.0mX0.7 m( 0.30 mtr above G.L &0.40 mtr below G.L)

Providing and fixing fire extinguishers of surperior class make as per IS specification

Excavation in foundation and trenches etc.( for pipes and pits) up to all depthsand all classification of earth such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per direction of the Engineer-in-charge.

Providing , Laying, jointing and testing in trenches to be leveled to grades IS marked API pipe s of 65mm diametres conforming to API -5L-Gr -56 ( latest with up to date amendments)having wall thickness 3.60 mm as per class of pipe specified, jointed with after every 100 meter joints with flanges conforming to tables as mentioned below of BIS 6392-1971 (latest with up to date amendments) welded at both ends of pipe according as per 816-1965 with elecrodes of BIS as per 814-1991 and detailed specifications & provide with nuts and bolts of required sizes 3mm thick compressed asbestos fibre gasket of synthetic rubber gasket conforming torelevant BIScodes& reaming joints with Circumferencial Butt Welded joints- by electrical arc welding to required dia Pipe welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS : 816-1969 specifications, by using welding electrodes of 2.50 mm to 6.30 mm of advani oerlikon (Adore) - CITOJET/ ESAB make, conforming to IS :814 -1991, including flushing cleaning and hydraulic testing as per the direction of the Engineer-in-charge.The pipe shall be factory galvanized(Zinc coated both insinde and outside as per IS 4736-1986 with upto emendment with in all leads and lifts complete.

Dia of Pipe 65mm at RD 0-600 wall tickness 3.60mm jointed with flanges of table 28

Dia of Pipe 65mm at RD 600 -900wall tickness 3.60mm jointed with flanges of table 17

Dia of Pipe 65mm at RD 900-1340 wall tickness 3.60mm jointed with flanges of table 5