Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date30 Dec 2023
Closing DateCancelled
Tender Amount₹ 21,08,43,567
Costs
EMD
₹ 21,08,436Document Cost
₹ 2,500Tender Fee
Refer Documents
Summary
Augmentation Of Water Supply Scheme Keylong Town Providing 24 By7 Anti Freeze Water Supply To Keylong Town In Gp Keylong District Lahual Spiti Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HPIPH_83337_1Tender No
10841-10891 dated 29.12.2023Tender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation in foundation and trenches etc. in all kind of soil earthwork lift up to 1.5 meters, stacking the excavated soil not more than 3m clear from the edge of the excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. then consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20m in pick jumper work. (Pick work 40% , Jumper Work 40%, Chiselling 20%)
695.99
-
-
Providing and laying cement concrete 1: 2 : 4 ( 1cement: 2 sand : 4graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- Foundation & Plinth
210
-
-
Columns,pillars, posts and strus ( Square, reckongular or polygonaluim plan)
41.45
-
-
Providing and laying cement concrete 1:4:8 (1 Cement : 4 sand :8 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work foundation and plinth Complete in all respects within all leads and lifts as per direction of the Engineer-in-Charge.
32.49
-
-
Providing & Laying cement concrete 1:6:12 ( 1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per satisfaction and direction of Engineer-in-charge.
18
-
-
Providing and laying cement concrete M-30 (but Not less than 1:1.5:3) (1cement : 1.5 sand: 3 graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reinforcement in:
-
-
-
Foundation & plinth
48.46
-
-
Walls (any thickness but not less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.
152.03
-
-
Providing and laying cement concrete 1:3:6 (1 Cement :3sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work foundation and plinth Complete in all respects within all leads and lifts as per direction of the Engineer-in-Charge.
106.46
-
-
Providing and laying cement concrete 1:1.5:3 ( 1 Cement : 1.5 sand : 3 gareded stone aggregate 20 mm or minimum M-20 down guage nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :
-
-
-
Foundation , footing bases of columns and the like and the mass concrete.
211.01
-
-
Wall (any thickness, but not less than 0.10 mtr. thickness) attached pilasters, buttresses, plinth & string courses etc. from top of foundation level upto floor two level
82.79
-
-
Providing & Fixing MS Grating made up of ISA 65X65X6 mm & having MS Flat 40x10 mm welded @ rate of 50 mm clear spacing complete in all respect.
1630.5
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering ,strutting and propping etc.with wooden battens and ballies height of propping and centring below supporting floor to ceiling in all heights and removal of the same for in situ reinforced concrete and plain concrete work in:-
-
-
-
Foundation,footing, bases of columns and the like and the mass concrete in all leads and lifts to the entire satisfaction of Engineer-in-charge.
297.85
-
-
Sloping portion where inclination is more than 30° in all leads and lifts to the entire satisfaction of Engineer-in-charge
69.17
-
-
Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like.
543.8
-
-
Flat surfaces such as soffits o and suspended flors, roofs, landing and like : floor upto 200 mm in thickness in all leads and lifts to the entire satisfaction of Engineer-in-charge.
19.43
-
-
Columns, pillars, posts and strus in all leads and lifts to the entire satisfaction of Engineer-in-charge.
327.6
-
-
Providing mild/tor steel reinforcement for RCC Work i/c, bending binding placing in possition complete up to floor two level (Tor-steel) with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.
78828.39
-
-
Providing and Fixing MS Gate of size 1500 mm wide with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.
1
-
-
Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. (325 kl Capacity)
2
-
-
Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. ( 100 kl Capacity)
3
-
-
Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. (70 kl Capacity)
1
-
-
Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. (30 kl Capacity)
1
-
-
Providing and fixing of Cast Iron Sluice Valve with hand Wheel (BIS 14846) of Leader / Kirloskar make class PN 1.6 with Flange Table - 17 including cost of Nut & Bolts and Gasket. The diameter of valve as mentioned below in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
-
-
-
200mm dia PN 1.6
2
-
-
Providing in R.C.C. work smooth finishing of exposed surface with Cement mortar 1:3 (1 cement : 3 sand) with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.
1069.85
-
-
Steel work welded in built up sections,trusses and framed work i/c cutting, hoisting, fixing in position applying a priming coat of ready red lead paint, Using MS sections ie Angles,Channels etc or MS pipes ) in buildings , including carriage of materials with in all leads and lifts as per direction of Engineer-in-charge. complete :- In grating,framed guards & ladders etc.
74.08
-
-
Finishing wall with water proof cement paint of approved brand and manufacturer and of required shade on undecorated wall surafce (two coats) to give an even shade with in all leads and lifts as per direction of Engineer-in-charge.
96.48
-
-
Providing insulation for the Desilting tank by providing Puff pannelled walls of 100mm thick pannels with in all leads and lifts as per direction of Engineer-in-charge.
725.56
-
-
Providing & Fixing for any special purpose if RTD (Resistance Temperature Detectorand ) and Space heater are required in addition ,add following extra charges with in all leads and lifts as per direction of Engineer-in-charge.
-
-
-
Space heater (240 volts) for set of two
5
-
-
RTD (Resistance Temperature Detectorand )
5
-
-
Providing & Fixing arrangement for scour pipes with in all leads and lifts as per direction of Engineer-in-charge.
1
-
-
Providing and fixing of Mild steel Storage tank (Size 1.00m x 1.00m x 1.00m) made up of 4.00mm thick MS Steel plate having three numbers internal threaded GI socket of 65mm dia (for scour and distribution pipes) and with locking arrangement including prim
1
-
-
Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) with in all leads and lifts as per direction of Engineer-in-charge.
324
-
-
Wire crates made of G.I. wire filled with boulders with square cut faces against the wire. (Boulder filling to be measured and paid for separately) G.I. wire 5mm thick corresponding to SWG-8. 15cmx15cm mesh.
4050
-
-
Wire crates of G.I. wire filled with boulders with square cut faces against the wire. (Wire crates to be measured and paid for separately)
843.75
-
-
Providing and fixing of fencing Panel of size 1.80 x 1.20 of jali 25x25mm mesh welded to M.S. black tube 32mm dia of 14 gauge with M.S. flat cover 20x3mm, M.S. hold fasts 4 Nos (min.) made out of M.S. flat 32x5mm as per direction on Engineer-in-charge.
130
-
-
Applying priming coat over new steel and other metal surfaces after & including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.With rea
280.8
-
-
Painting two coats (excluding priming coat) on new steel and other metal surfaces under coat with readymixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter.
280.8
-
-
White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter.
815.1
-
-
Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M50 grade of NTC or other ISI Marked i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mor
150
-
-
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) and curing complete as per direction of engineer in charge.
195
-
-
Survey, Investigation , design ( Civil Work e.g intake trench weir, storage tank, desiliting tank) and submission of drawings (3 sets) vetted from reputed institution like NIT Hamirpur , IIT Mandi or from any other IIT/NIT as per direction and to the entire satisfaction of engineer in charge.
1
-
-
Pipe Work i.e Raw gravity main, Pure gravity main, Distribution network and house hold connection
-
-
-
Cutting in earth work in all kind of soil such as pick work, jumber work, blasting work in soft / hard rock or chiselling /wedging out soft / hard rock where blasting is prohibited and disposal of all surplus excavated earth in all lead & lifts complete as per the direction of Engineer-in charge. (Pick work 40% , Jumper Work 40%, Chiselling 20%)
5559
-
-
Excavation in earth work for trenches of required width & at least 1.20 m to 1.50 m depths in all classifications of soil such as spade work, jumper work, soft & hard rock, by chiselling in soft/hard rock where blasting is prohibited, in saturated soils ic bailing/pumping out the water in all lifts and dressing of sides, ramming of beds to the correct grade ic shoring strutting, planking, timbering and dewatering wherever required and getting out the excavated soil, stacking the serviceable/unserviceable material/soil separately and then returning the soil in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc. and disposing of the surplus excavated soil in all leads and lifts, the disposed earth to be levelled and neatly dressed, as per the directions & to the entire satisfactions of the Engineer-in-charge.
23962.5
-
-
Providing, laying, jointing and testing in trenches HDPE Pipes preferably of Reliance, Duraline, Jain irrigation make conforming to BIS 4984-2016 with latest upto date amendments, material Grade PE-100 & Pressure Rating Class PN 16 or as per design including the compression fitting such as Tees, elbows, adapters with metal inserts, reducers, service saddles required as per site conditions and jointing the pipes & fittings with the help of electro fusion machine complete in all respects in all leads & lifts as per the directions & to the entire satisfactions of the Engineer-in-Charge.
-
-
-
HDPE pipe 180 mm dia PN-16, PE- 100
2300
-
-
HDPE pipe 90mm dia PN-16, PE- 100
7370
-
-
HDPE pipe 63mm dia PN-16, PE- 100
6560
-
-
HDPE pipe 50 mm dia PN-16, PE- 100
4590
-
-
HDPE pipe 40 mm dia PN-16, PE- 100
4900
-
-
HDPE pipe 32 mm dia PN-16, PE- 100
3100
-
-
Providing multilayer thermal insulation to the pipes (at places where the pipes cannot be buried at the required depths due to site conditions & exposed to atmosphere and at the consumer end) with Nitrile Rubber Tube of class O with suitable adhesive, Resin Bonded Mineral Wool (Rock Wool) conforming to BIS: 8183-1993 (with upto date amendments) 50 mm thick having density 24 kg/m3, chicken wire mesh & binding wires, wrapping with polythene sheet (120 GSM) and 24 gauge aluminium alloy sheet conforming to BIS: 2676 (with upto date amendments) all around the pipe i/c all fixtures, adhesives, clamps etc. including cost of all the material & labour complete in all respects in all leads and lifts as per the directions & to the entire satisfaction of the Engineer- in-Charge.
-
-
-
180 mm dia
920
-
-
90 mm dia
2948
-
-
63 mm dia
2624
-
-
50 mm dia
1836
-
-
40 mm dia
1960
-
-
32 mm dia
1240
-
-
Providing laying and testing of HDPE Pipes of 20mm Dia preferably of Reliance , Duraline, Jain irrigation system Ltd. or any approved make conforming to BIS 4984-2016 with latest up to date ammendments including fitting required for connection and Providing multilayer thermal insulation to the pipes (at places where the pipes cannot be buried at the required depths due to site conditions & exposed to atmosphere and at the consumer end) with Nitrile Rubber Tube of class O with suitable adhesive, Resin Bonded Mineral Wool (Rock Wool) conforming to BIS: 8183-1993 (with upto date amendments) 50 mm thick having density 24 kg/m3, chicken wire mesh & binding wires, wrapping with polythene sheet (120 GSM) and 24 gauge aluminium alloy sheet conforming to BIS: 2676 (with upto date amendments) all around the pipe 1/c all fixtures, adhesives, clamps etc. including cost of all the material & labour complete in all respects in all leads and lifts as per the directions & to the entire satisfaction of the Engineer- in-Charge.
22200
-
-
Providing, fixing and testing Heat Trace Cable of 25 Watt Capacity or as per design of DENFORCE/ CROMPTON/ any other equivalent make along the pipelines with heat wire 25x13mm, pipe to be insulated using Nitrile Rubber Tube of class O with suitable adhesive, 50 mm thick Mineral (rock) wool having density 24 kg/m3 conforming to BIS: 8183-1993 (with upto date amendments), chicken wire mesh, polythene sheet & aluminium sheet conforming to BIS: 2676 (with upto date amendments) for covering all around the pipe i/c all fixtures, adhesives, clamps etc. complete i/c the cost of all material & labour complete in all respects in all lead and lift as per the directions & to the entire satisfaction of the Engineer- in-Charge.
6660
-
-
Providing and fixing of Cast Iron Sluice Valve with hand Wheel (BIS 14846) of Leader / Kirloskar or any other approved make class PN 1.6 with Flange Table - 17 including cost of Nut & Bolts and Gasket. The diameter of valve as mentioned below in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
-
-
-
200 mm Dia
1
-
-
100 mm Dia
1
-
-
65 mm dia
3
-
-
Providing & Fixing Gun metal wheel valve (GM (IS 318 LTB 2 ) as per IS : 778 of leader make/ Kriloskar or any other approved make complete in all respects in all lead and lift as per the directions & to the entire satisfaction of the Engineer- in-Charge.
-
-
-
65 mm Dia
4
-
-
50 mm Dia
7
-
-
40 mm Dia
6
-
-
32 mm Dia
5
-
-
Providing & Fixing pressure relief valve made up bronze (IBR clause 282(a) BM 016 G 1 25 5882 (IV) Gr. B) , spring loaded working pressure : Max , 150 PSIG (10.34 Bar) Water or Air of valve as per direction of Engineer-in charge.
-
-
-
65 mm Dia
4
-
-
50 mm Dia
7
-
-
40 mm Dia
6
-
-
32 mm Dia
5
-
-
Providing , Supplying and fixing of gate valve or any other approved make of following dia as per direction and to the entire satisfaction of engineer in charge.
-
-
-
20 mm dia
222
-
-
Providing and laying cement concrete 1:3:6 (1 Cement :3sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work foundation and plinth Complete in all respects within all leads and lifts as per direction of the Engineer-in-Charge.
265.2
-
-
Survey, Investigation , design (Hydraulic Design of Connecting main, Gravity main, Distribution system) and submission of drawings (3 sets) vetted from reputed institution like NIT Hamirpur , IIT Mandi or any other IIT/NIT as per direction and to the entire satisfaction of engineer in charge.
1
-
-
Pumping Machinery, Pannel Room, Rising Main
-
-
-
Supply of submersible pumping set of (KSB /Kalama/Kirloskar/Johnston/Cromption/BS) or any other approved make conforming to IS latest suitable for lifting clear water (latest with uptodate ammendments) fitted with bronze impellers/suitable alloy directly coupled to squirrell case electric induction motor of same make as (manufacurer standard) conforming to IS (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard,errection clamps,cable clips & depth gauge etc. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-)15% of the duty point head. The motor /motors cofirming to minimum IE2 norms IS-12615/2011 with up to date amendments.It should include cost of bearing nuts, bolts and pointing etc. The pump set should be capable to perform the following duties:- Discharge (Q) :-2.09 LPS For Each Pump Total Dynamic head:- 226.84 meter a) LWL in sump well (h):- 3341 meter
b) Shaft level :- 3340.00meter c) Level at discharge point:-3527.00 meter d) Suction lift-ve :- 1 meter e) Dynamic head :- 226.84 meter f) Static head :-187.00 meter Rising main a) Length :-2550 meter b) Dia :- 65 mm Pumping hours :- 4 Hours Altitude of installation above MS :-3340 meter Characterstics of water Clear water with turbidity up to 50 PPM. a) Temperature 5 degree centigrade.
2
-
-
Providing control panel as per KSB specifications and having protection of motor on occurance of faults { Triping on occurance of fault(s) i.e. Moisture, high motor temperature, dry running, reverse rotation, Single phasing, voltage imbalance, overload and short circuit } and indiation thereof by glowing fault lamp ; for motors above 30 KW another protection of Mechanical seal failure shall also be provided in addition to above protections; fitted with following components:- 2.00 Set Powder coated steel sheet fabricate enclosure of suitable size to accommodate the following accessories:- Shnider /L&T/Havells/Standard make MCCB in MAINS on incomer side Shnider/ Siemens make phase indicating lamps Logestic or similar superior make 300VA transformer Conzerv make digital VAF meter having direct digital display of Ampere, Voltage and frequency with selector switch and CTs where ever required (all perameters displaying in one meter only ) AUTO/MANUAL switch Salzer/L&T/kaycee make 3 Nos CONTACTORS of Spercher+ Schuh /L&T/Schnider /BCH/Siemens make, for star delta starting Over load relay STAR-DELTA TIMER ( for pumpset above 7.5HP) SINGLE PHASING PREVENTOR ON/TRIP INDICATING LIGHTS Schnider/ Siemens /L&T make CONTROL MCB Schnider/ Havells/Standard/Siemens/ Legrand make PUSH BT. Schnider/Siemens/L&T make TERMINALS Phonix make RCCB of Legrand/Siemens/Havells / L&T/ Standard make Hour run meter of CE/Kaycee make
-
-
-
Providing Double flanged Leader / Pelican /Kirloskar or any other approved make Cast iron Sluice Valve in delivery side conf. to Class IS 780 PN 1.0; one size higher than delivery outlet size of pump (suitable dia) =2.00 Nos
-
-
-
Providing Double flanged Leader / Pelican /Kirloskar or any other approved make Cast iron Swing check type Reflux Valve in delivery side conf. to Class IS 5312 PN 1.0; one size higher than delivery outlet size of pump (suitable dia) = 2.00 Nos
-
-
-
Prov. and laying PVC Insulated armoured copper conductor cable Havells/Gloster/Khaitan make of suitable size and suitable for motor offered under item No I complete with flexible pipe and couplers from HPSEB meter to Panel, switch, starter complete job, The type and size shall be subject to approval of Electrical authorities and in case of its non acceptance the same shall be replaced free of cost by the tenderer Supply side:........................sqmm = 1.00 Job
-
-
-
Prov. and laying PVC Insulated round copper conductor cable of suitable size suitable for motor offered under item No 50 complete having suitable cores to fulfill requirement of star delta starter and protection/ controls from panel to motor10 Mtr cable per set shall be supplied free of cost ( cost inclusive in cost of pumpset ) additional length shall be measured to and paid seperately. Cost to be quoted for additional length over and above free cable of 10 Mtr/ pumpset. Motor side:-................sqmm =70.00 Mtr
-
-
-
Providing 100 mm dial pressure guage of Fiebig/Bourden make having range 0-7 Kg/cm^2 with copper tubing, stop cock and allied access.as per IS 3624 - 1987 latest with up to date amendments = 2.00 Nos
-
-
-
Supply of cable for water level guard = 1.00 Job
-
-
-
Supply of supporting clamps = 1.00 Job
-
-
-
Supply of cable clips of required size =1.00 Job
-
-
-
Erection of all equipments from Sr No 1 to 11 including cost of tee's bends, tappers and any other required fitting as per site condition and directions of engineer In charge. =1.00 Job
-
-
-
Excavation in foundations, trenches etc., in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each depositrd layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect as per entire satisfaction of Engineer in Charge.
2409.75
-
-
Providing, Laying, jointing and testing in trenches GMS pipes of following dia confirming to IS 1239-1990 (latest uptodate ammendments) of grade and wall thickness as specified below , suitable to withstand required hydraulic pressure in random length 4m to 7m with plain ends and jointed with MS flanges and butt welded joints i.e 5% flanged joints and remaining butt welded joints as per CHEEPO manual and will include all operations such ascuttiung , welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of engineer in charge inc entire carraige of material upto all leads and lifts.
-
-
-
65 mm dia (H)
2550
-
-
Providing circumferential butt welded joints by electrical arc welding to MS pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
-
-
-
65 mm dia (H)
404
-
-
Providing and welding of MS flange IS 6392-1971 of table 17, 65 mm dia. The welding of flanges with pipe should conform to IS 816-1967 including required number of bolts as per IS 1369-1967 and 3 mm thick asbestos fiber jointing gaskets conforming to make the joint leak proof and to entire satisfaction of the Engineer-in-charge.
-
-
-
65mm dia (H) FT 17
21
-
-
Providing multilayer thermal insulation to the pipes (at places where the pipes cannot be buried at the required depths due to site conditions & exposed to atmosphere and at the consumer end) with Nitrile Rubber Tube of class O with suitable adhesive, Resin Bonded Mineral Wool (Rock Wool) conforming to BIS : 8183-1993 (with upto date amendments) 50mm thick having density 24 kg/m3, chicken wire mesh & binding wires, wrapping with polythene sheet (120 GSM) and 24 gauge aluminium alloy sheet conforming to BIS: 2676 ( with upto date amendments) all around the pipe i/c all fixtures, adhesives, clamps etc. including cost of all the material & labour complete in all respects in all leads and lifts as per the direction & to the entire satisfaction of the Engineer-in-Charge.
-
-
-
65mm dia (H)
1020
-
-
Survey, Investigation , design (Hydraulic design of Pumping ) and submission of drawings (3 sets) vetted from reputed institution like NIT Hamirpur , IIT Mandi or any other IIT/NIT as per direction and to the entire satisfaction of engineer in charge.
1
-
-
Prefabricated Package Water Treatment Plant comprising following :
-
-
-
Designing (aesthetically, Structurally, Hydraulically), providing, fabricating Package Water Treatment Plant at the shop, transporting to site, installing, testing and commissioning at the site, giving necessary one month's free test and trail run as specified in general condition with guarantee for one year, etc. complete. Prefabricated Package Water Treatment Plant comprising following : 1. Automation of complete WTP , existing network upto storage tanks with main SCADA and control station.
2. Rapid mixing channel in M.S. sheets and M.S. baffle.
3. Flocculator not less than 10 minutes detention, in M.S. prefabricated box, flocculation being achieved either by glass pebbles of graded size or PVC tetrapod or equivalent arrangement to ensure good floc formation.
4. Plate or tube settlers of not less than 30 minutes detention in M.S. prefabricated box, the plates / tubes mounted in the settler basin with inclination of not less than 60 degree to horizontal.
5. Inlet arrangement 6. Support for module. 7. Tube modules 8. Setteled water collection arrangement. 9. Rapid sand gravity filter in M.S. prefabricated box with filter sand not less than 500 mm thick, supported on false floor below with polypropylene nozzles spaced at not more than 500 mm centres in either direction.
10. Filter Inlet arrangement.
11. Filter Media.
12. Filter opration and control.
13. Filter under drain system.
14. Backwashing, inlet & outlet facilities shall be provided.
15. Filter ports , piping and pipe gallery 16. RCC Sump and Pump house 17. Head loss indicator 18. Wash water arrangement and pumps.
19. Laboratory equipments 20. External & Internal electrification 21. Furniture 22. Laboratory room .
23 Chowkidar / attendant room .
24 Disinfaction room Package Water Treatment Plant. 42 Cum/Hr. (1.00 MLD)
1
-
-
Supplying, erecting and commissioning of diesel generating set with alternator of 25 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG
1
-
-
Providing insulation for the WTP by providing Puff pannelled walls of 100mm thick pannels as per direction of engineer in charge
675
-
-
Providing & Fixing for any special purpose if RTD (Resistance Temperature Detectorand ) and Space heater are required in addition ,add following extra charges with in all leads and lifts as per direction of Engineer-in-charge.
-
-
-
Space heater (240 volts) for set of two
5
-
-
RTD (Resistance Temperature Detectorand )
5
-
-
Providing and Installation of Solar Pannel System of 25 kw capacity with in all lead and lift as per direction of Engineer in Charge
1
-
-
Steel work welded in built up sections,trusses and framed work i/c cutting, hoisting, fixing in position applying a priming coat of ready red lead paint, Using MS sections ie Angles,Channels etc or MS pipes ) in buildings , including carriage of materials with in all leads and lifts as per direction of Engineer-in-charge. complete :- In grating,framed guards & ladders etc.
7434
-
-
Providing and fixing 0.60mm thick prepainted sheet in roofting with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hook , bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with al;l accesoriees as required as per the directionn of Engineer-in -charge including carriage of materials within all leads , lifts and other incidentals.
505.44
-
-
Survey, Investigation , design (Hydraulic design of WTP ) and submission of drawings (3 sets) vetted from reputed institution like NIT Hamirpur , IIT Mandi or any other IIT/NIT as per direction and to the entire satisfaction of engineer in charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements