Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date21 Nov 2024
Closing Soon30 Nov 2024
Tender Amount₹ 6,39,47,685
Costs
EMD
₹ 6,72,000Document Cost
₹ 2,500Tender Fee
Refer Documents
Summary
C/o Plwss From Kurpankhad To Gp Ghatoogamog And Shilli In Nirmand Block Distt. Kullu (h.p)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HPIPH_95631_1Tender No
6621-50(Anni)Tender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth.
71.68
-
-
Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth.
48.4
-
-
Providing and laying cement concrete 1:5:10 (1cement: 5 sand:10 graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth.
345.72
-
-
Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work including all leads and lifts:
-
-
-
Foundation footing and bases of columns & like mass concrete.
109.91
-
-
Walls (any thickness) but not less that 0.10 Mtrs. hick including attached pilasters buttresses plinth and string course from top of foundation upto floor two levels.
258.89
-
-
Suspended floors, roofs, landing shelve and their supports balconies beams,girders bressumers and centilevers upto floor two level
44.89
-
-
Arches upto floor two level.
23.07
-
-
Providing Mild/TOR steel reinforcement for RCC work i/c bending, binding & placing in position complete up to floor two level (TOR/Mild steel ) in all leads and lifts as per direction of Engineer-in charge.
32977.49
-
-
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work including all leads and lifts complete to the entire satisfaction of Engineer-in-charge.
-
-
-
Veritcal surface such as wall ( any thickness) partion and the like including attached pilaster, butresses, plinth and string courses and the like with in all leads and lifts as per the direction of Engineer-in-Charge.
2205.64
-
-
Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc upto 200 mm in thickness with in all leads and lifts as per direction of Engineer-in-Charge.
64.46
-
-
Foundation footing and bases of columns & like mass concrete.
7.78
-
-
Column, pillar & post upto floor two level square, rectangular & polygonal in plan.
59.72
-
-
Beam, cantilever Girders & lintals side & soffits of beam haunching cantilever girder not exceeding 1 mtrs depth.
121.82
-
-
Providing from work of ordinary timber planking’s so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooden battens & ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ reinforced concrete and plain concrete work with in all leads and lifts as per the direction of the Engineer-in-charge in :-
-
-
-
Arches beyond 6.0 mtrs. Span.
230.71
-
-
Laying jointing of G.I pipes (L.G) ,tube fitting in trenches I e e/c earth work complete for inlet and scour pipe including all leads and lifts and to the entire satisfaction of Engineer in charge.
-
-
-
150 mm dia.
69
-
-
80 mm dia.
90
-
-
Providing and fixing C.I. Sluice valve (with hand wheel) as per IS:780 Class-I upto 300 mm dia (including brass spindleand as per IS:2906- 1984 class II for diameters more than 300 mm complete with bolts, nuts, rubber insertion etc,(The tail pieces if required shall be measured and paid for separately)
-
-
-
150 mm dia
12
-
-
80 mm dia
10
-
-
Providing and Fixing MS man hole cover with frame having frame size of 560 mm internal dia (MD) The weight of cover & Frame should not be less than 100 Kg. complete in all respect.
11
-
-
Providing and fixing C.I. Ventilating pipe 100 mm dia, 1mtr. Height with C.I Cowl fixed at top including all fitting requirement complete in all respect within all lead and lifts as per the direction of Engineer-in-Charge.
5
-
-
Random rubble masonery /polygonal rubble masonary ( Uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with CC 1 : 6 : 12 ( 1 cement: 6 sand: 12 graded stone aggregate 20mm nominal size) in C.M. 1: 6 (1cement : 6sand) in Breast walls & retaining walls within all leads and lifts as per satisfaction and direction of Engineer-in-charge.
36.45
-
-
Half brick work using common burnt clay building bricks above plinth upto floor two level in cement mortar 1:3 ( 1Cement, 3 Sand ) of 1nd class bricks complete in all respect with in all leads and lifts.
23.88
-
-
Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement: 6 sand), I st class bricks complete in all respect with in all leads and lifts.
58.62
-
-
Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement: 6 sand), 2nd class bricks complete in all respect with in all leads and lifts.
25.81
-
-
Brick work using common burnt clay building bricks in super structure above plinth level up to floor two level in cement mortor 1:6 (1 cement: 6 sand), 2nd class bricks complete in all respect with in all leads and lifts.
5.1
-
-
Providing and fixing pressed steel door, frames, manufactured from comercial mild steel sheet of 1.25 mm thickness including hinges jump block Jamb, beed, and if required angle threshold of mil steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by machanical means adjustable lugs with split and tails to each Jamb i/c steel but things 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of applying steel primer after pretreatment of the surfaces directed by the Engineer-in-charge
-
-
-
Profile-A
17.7
-
-
Profile-B
62.4
-
-
Profile-C
52.8
-
-
Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright 2nd class deodar wood 40mm thick with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
54.72
-
-
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.G with wire of dia 0.56 mm for doors,windows ic bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect.
61.2
-
-
15 mm thick cement plaster in single coat on rough side of brickstoneconcrete walls for interior plastering up to floor two level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:4 ( 1 cement,4 sand ) with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
627.08
-
-
15 mm thick cement plaster in single coat on rough side of brickstoneconcrete walls for interior plastering up to floor two level including arrisses,internal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 ( 1 cement,4 sand ) with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
224.2
-
-
20 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand) with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
633.4
-
-
6 mm thick cement plaster to ceiling in CM 1:3 (1 cement :3 sand in roof slabs.with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
5.86
-
-
Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1cement:3 sand) with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.
875.36
-
-
White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter as per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts.
1296.84
-
-
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primeras per direction & satisfaction of the Engineer- in- charge upto all lead & lifts.
669.76
-
-
Finishing wall with water profing cement paint of approved brand and manufacture and of rerquired shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. with distemper primeras per direction & satisfaction of the Engineer- in- charge upto all lead & lifts.
695.22
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1.4 (1 cement 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete in all leads and lifts as per direction of Engineer-in charge.
269.8
-
-
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink. as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts.
141.9
-
-
Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping with animal paint other then white and as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts.
141.9
-
-
Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete in all respect including carriage of material in all leads & lifts.
68.2
-
-
Providing and fixing in position collapsible steel shutter with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stopper, handle, including applying a priming coat of approved steel primer with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge.
18
-
-
Providing and fixing anodized Mild Steel sliding door bolts withnuts and screws complete.
-
-
-
300mmX16mm
24
-
-
250mmX16mm
2
-
-
Providing and fixing anodized mild steel tower bolts barrel type with screws etc. complete.
-
-
-
200mmX10mm
96
-
-
150mmX10mm
4
-
-
250mmX10mm
6
-
-
Providing and fixing anodized mild steel.handles with screws etc. complete.
-
-
-
125 dia
18
-
-
100 dia
34
-
-
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia metres bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm. 1:3:6( 1cement:3sand:6 graded stone att. 20mm nominal size) within all leads and lifts and as directed by the Engineer-in-charge.
60
-
-
Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement: 3sand: 6graded stone agg. 20mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, i/c necessary excavation, levelling, dressing & finishing the top surface of concrete smooth within all leads and lifts and as directed by the Engineer-in-charge.
57.36
-
-
Providing and Fixing of 1.80 metre high fencing with 2.50 metre angle iron post 50 x 50 x 6 mm , 2.50 metre centre to centre with nine horizontal lines and two diagonals of galvanised steel bar bed wire (IS:278-1962 type-I) weighing 9.38 kg/per 100 metre (minimum) strained and fixed to posts complete cost of post struct and straining bolts shall be paid for separately horizontal and diagonal wire.
480
-
-
Steel work welded in built up sections,trusses & framed work i/c cutting, hoisting & fixing in position & applying a priming coat of red paint :-In grating, framed ,guards, bars,ladders, railing,brackets & similar works with in all leads and lifts as per the entire satisfaction & direction of the Engineer- in-charge
2605.79
-
-
Providing and fixing of Corrugated galvanised Iron roofing over the truss/ frame structure with J- hook or L- hook including all cutting and welding etc. complete in all respect as per the direction of Engineer-in-charge.
328.1
-
-
Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( MG) including fitting and clamps including making good the wall ceiling and floor complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .
-
-
-
15mm nominal size
36
-
-
Providing and fixing PVC pipes of 10 Kg f/Sq.cm working pressure including fittings as per requirement at site complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in-charge .110 mm OD
40
-
-
Providing and fixing vitreous china wash, down water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement: 1 sand). Seat and cover to be measured and paid for seperately. Anglo Indian Universal closet.
2
-
-
Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers: White plastic seat and cover, solid type.
2
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White
2
-
-
Providing and fixing PVC / G.I. inlet connection for flush pipe connecting with W.C. pan.
2
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
6
-
-
Providing and fixing C.P. brass angle valve of standard design and of approved make, 15mm nominal bore.
6
-
-
Providing and fixing C.P. water jet including connection pipe with check nut complete in all respect.
2
-
-
Providing and placing (at all heights) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including all fittings and float valve excluding the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license ]. 300 Ltrs. capacity
600
-
-
Providing and fixing vitreous china wash basin of approved brand including all fitting in all respect and to the entire satisfaction of Engineer-in- Charge
2
-
-
Providing and fixing long nose Tap of approved brand including all fitting in all respect and to the entire satisfaction of Engineer-in- Charge
2
-
-
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge. (Group C)
44
-
-
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge.
-
-
-
2x1.5 Sq.mm
100
-
-
2x4.0 Sq.mm
50
-
-
(a)Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.
6
-
-
(b)Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc.
6
-
-
Supplying & fixing wooden boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-
-
-
-
229mm.x102mm.x60mm. deep
6
-
-
203mm.x152mm.x60mm. deep
6
-
-
Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.
18
-
-
Supplying and fixing plain pendent with 16/0.20 mm twin twisted, flexible, PVC insulated, cotton braided, copper cable and bakelite pendent holder including connections etc. as required:-
6
-
-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-
12
-
-
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
2
-
-
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A.
2
-
-
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-
4
-
-
Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.
-
-
-
1 x28 watt-FTL(T5) (Category-A)
6
-
-
Providing and fixing following type of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and commissioning etc. as required.
-
-
-
1.4 2604 3 x36 watt-CFL (Category-A)
6
-
-
Providing and fixing two core service wire 6mm thick.
90
-
-
Laying, jointing and testing in trenches galvanized mild steel screwed and socketed /flanged pipes of following diameter and class, tube fittings in trenches i/c carriage of pipes from Sub-Divisional Store to site of work,(Earth work in trenches to be measured and paid for separately) complete in all respect and to the entire satisfaction of the Engineer-in-charge.
-
-
-
80 mm dia (LC)
800
-
-
65 mm dia (LC)
6100
-
-
50 mm dia (LC)
7100
-
-
40 mm dia (LC)
4740
-
-
32 mm dia (LC)
3800
-
-
25 mm dia (LC)
11028
-
-
20 mm dia (LC)
1950
-
-
Providing laying, jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007 confirming to L-390 pipe of following diameter (latest with up to date amendments) steel grade A & wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers, all short pieces, beds etc. as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting. welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately).
-
-
-
RD From To Length in mtrs Pipe (MM) wall Thickness Class 0 to 400 & 400 to 800 = 800 150 7.10 (L-390 (X-56) 100% Length of Butt Welding = 800 rmt. Ist Stage
800
-
-
RD From To Length in mtrs Pipe (MM) wall Thickness Class 800 to 1700 = 900 150 6.40 (L-390 (X-56) 100% Length of Butt Welding = 900 rmt. Ist Stage
900
-
-
RD From To Length in mtrs Pipe (MM) wall Thickness Class 1700 to 2100 & 2100 to 2500 = 800 150 5.60 (L-390 (X-56) 100% Length of Butt Welding = 800 rmt. Ist Stage
800
-
-
RD From To Length in mtrs Pipe (MM) wall Thickness Class 0 to 400 & 400 to 1200 = 1200 100 4.80 (L-390 (X-56) 100% Length of Butt Welding = 1200 rmt. IInd Stage
1200
-
-
Laying and binding (By way of circumferental butt welding by electrical arc welding) and testing of galvanised mild steel tube G.I pipe of following dia. Confirming to BIS 1239-2001 (Latest with upto date ammendements having wall thickness as per code with bevelled / Plain ends in a random length of 4 to 7 Mtrs. including mfg. reducers/ tapers all the pieces, bends etc. as per site requirement made from parent tube. The laying of will includes all operation such as Cutting, welding, jointing, fabrication of bends, tee etc. including lowering and laying in excavated trenches to ensure required level including flushing and cleaning anad hydrullic testing complete in all respectto the satisfaction of the Engineer in Charge. the fabricated bend shall have three or four cuts having its radius not less than five times the dia. of ppe. the dameged portion of the pipe end special made form the parent tube during welding or otherwised shall be provided anti corrossive treatment by applying two coats of anti corrossive bitumens paint over a priming coat as per AWWA specifications C-203 -1978. the welding electric shall be Aas per IS 814 of advani Oerlkon / L&T or ISI markd make. The rate also includes entire carriage of material, flushing, cleaning, hydraullic testing complete to the best satisfication and direction of Enginner in Charge with in alll leads and lifts.(Earth work in trenches will be measured and paid for separtely.
-
-
-
2nd Stage RD From To Length (in Mtrs) Pipe(MM) Wall Thickness Class 1200 to 3250 = 2050 100 4.50 MC Length of Butt Welding@ 100 % 2050
2050
-
-
RD From To Length (in Mtrs) Pipe(MM) Wall Thickness Class 0 to 950 = 950 150 4.80 MC Length of Butt Welding@ 100 % = 950 (For Gravity Main)
950
-
-
Providing, Laying, Jointing Flanged joints including welding the same with MSERW Pipe /GI Pipe with following flange (@ 5% joints in total length of gravity main) mentioned below with nuts and bolts of required sizes, 3mm thick compressed asbestos- fiber gasket or synthetic rubber gasket confirming to relevant BIS Code and to the direction & best satisfaction of Engineer in charge.
-
-
-
1st Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 0 to 400 & 400 to 800 = 800 150 38
8
-
-
1st Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 800 to 2100 = 1300 150 34
13
-
-
1st Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 2100 to 2500 = 400 150 28
4
-
-
2nd Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 0 to 800 = 800 100 34
8
-
-
2nd Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 800 to 2400 = 1600 100 28
16
-
-
2nd Stage RD From To Length (in Mtrs) Pipe(MM) Flange table 2400 to 3250 = 850 100 17
9
-
-
RD From To Length (in Mtrs) Pipe(MM) Flange table 0 to 950 = 950 150 5
10
-
-
"PUMPING MACHINARY. 1st Stage
Providing horizontal spindle,horizontal/redial split casing/end suction(Back-pull out arrangements) single/double/multi stage centrifugal pump or combination of pumps, In senes/parallel of recommended make such as Mather and Platt/KSB/ Beacon Weir/Kirlosker/BE/Jyob as per BIS 1520-1980 with upto date ammendments, read with IS 9137-1978 or latest edition suitable for lifting water for under mentioned characterestics with bronze impellers/priming funnels casing ring and shaft sleeves of bronze shaft of steel grade 4508 FN8 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel base plate (base plate to be from the manufacturer of the pumping unt only) to slip ring/ squirrel cage screen protected drip proof induction motor /motors of minimum IE2 efficiency & standard make such as Kirlosker/BHEL /Crompton INGEF /GEC/Siemens/Jyoti /ABB and suitable for operation on 400(+/-)10% volts,50 cycles /second 3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/pumps in the operation range of (+) 10% and (-)15% of the duty point head. The motor/motors as per ISI 325 1978 with upto date ammendments read with IS 900 1972 It should include cost of bearing nuts, bolts and painting etc and should meet the following requirements
2
-
-
I) Discharge (Q) 11.24 LPS for each pump
-
-
-
II) Total dynamic head 726.20 Mtr.
-
-
-
a) LWL in sump well (h) 1141 Mtr.
-
-
-
b) Shaft level 1140 Mtr.
-
-
-
c) Level at discharge point 1850 Mtr.
-
-
-
d) Suction lift +Ve
-
-
-
e) Dischrage head 726.20 Mtr.
-
-
-
f) Static head 710 Mtr.
-
-
-
III) Rising main
-
-
-
a) Length 2500 Mtr.
-
-
-
b) dia 150 MM
-
-
-
iv) Pumping hours 12 Hours
-
-
-
v) altitude of installation above MSL 1140 mtrs.
-
-
-
vi) Characterstics of water. Clear water with Turbidity upto 50PPM
-
-
-
a) Temperature 20 Degree centigrade
-
-
-
Note: One Pump set working & One stand by
-
-
-
Providing and fixing ICTP main switch with HRC fuses of Kilburn/L&T/Seimen/ Standred/Havells make and having capacity 30% extra of the operationl rating/ as per IS-4064-1978 with up to date ammendments immediately after the power meter of the HPSEB.
1
-
-
Prov. & fixing M.S. sheet,steel fabricated floor mounted closed (almirach type switch board including angle iron post of suitable height and size ISA 40x40x6, duly painted with steel sheet of 16 guage comprising and capable of mounting the following accessories with all internal connections.All accessories should be suitable for the proposed pumping machinery at item NO.1 above and to the entire satisfaction of HPSEB authorities. The same shall have to be replaced with out extra cost if recommended by HPSEB authoroties.
1
-
-
OCB/MCCB of MEI/Havels/standard make and suitable capacity of offered motor on incoming feeder with or without intial oil filling as the case may be with linked under voltage released as per relevent IS code with up to date ammendments.
1
-
-
Earth leakage circuit breaker ELR of recommended make(Kilburn/L&T/MEI/GEC as per IS:2516-1977 with uptodate ammendements and of suitable of range which should have control box, operating,handle and trip/reset bush button on/off indicatorsre-indicating off spring condition of the circuit breaker for over current protection. The circuit should be equipped with magnet thermal release with metallic tape CTS, It should also be fitted with earth fault for tripping of breaker on occurance of earth fault on off breaker load side and.suitable for 60 HP motor.
1
-
-
The voltage meter relay of AE/MEI/L&T/ Havells make 3 phase with all protection and usual indicators and electric siran against single phasing, Low voltage high voltage reverse phasing over loading and phase voltage difference as per IS:3842(latest edition)
1
-
-
Digital 100 mm diameter circular dial A.C. supply volt meter of recommended make AE/IMP/Havells of suitable range with slector switches as per IS:4064-1978 with uptodate ammendements.
1
-
-
Digital Power factor meter of standard make AE/L&T/IMP/Havells as per relevant IS code with up to date ammendments
1
-
-
Digital frquency meter of standard make AE/L&T/IMP/Havells as per relevant IS code with up to date ammendments
1
-
-
Bus bar chamber having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current, one copper bar of half the rating of full length for netural phase as per IS:8084-1976 and IS:11353-1985 read with BIS-5578-1985 with uptodate ammendements.
2
-
-
Providing ICTP main switch with HRC of Kilburn/L&T /Siemens/Standarrd/Havells make and having capacity 30% extra of operational rating as per IS:4069-1978 with up to date amendments,immediately after the power meter of HPSEBL.
2
-
-
Three phase indicator lamps complete with toggie switches for individual motors as per IS:3452(P-I&II) with upto date ammendements.
2
-
-
Digital 200mm dia circular dia A.C. supply ammeter of A/E/IMP/Havells make of suitable range with selector switches and CTS operated as per IS:1248(P-II) 1983 with upto date amendements.
2
-
-
Capacitor of Mecheil/BHEL/GEC/L&T/ make as per IS 2834-1986 with upto date ammendements, to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code (of Siemens/Clocter/IEC make) from bus bar chamber to capacitor and also including ICPT switches of appropriate upto date ammendements.
2
-
-
Providing suitable oil immersed starter delta/direct on line/auto transformer/. starter rotor starter of MEI/.Kilburn/Jyoti /L&T/Siemens make as per IS:8544:1979 with upto date ammendments for squirrel cage/slip ring motor mounted on panel board with magnetic type over-load release and dashpot, time lag, under voltage release with or without initial oil filling as the case may be with single phae preventor as per IS:1248( P-V) 1983 with upto date ammendments
2
-
-
Providing Digital hour run meter of recommended make and suitables capacity as per IS :722 ( latest edition)
2
-
-
Providing antivibration pads under the pump and motor of suitable size for the above pumping machinery as per IS: 6337: 1971.
2
-
-
Providing double flanged CI sluice valve PN-1.00 of Leader/BHEL/Kirlosker/ GLED/Kilburn /Fourses / Kartar make and equal to dia of suction pipe and capable of withstanding the normal seat pressure as per IS:780:1984 with upto date ammendments.
2
-
-
Providng double flanged cast steel sluice valves ASA-300 of leader/BHEL Kirlosker/Kilburn GLED/fourses make and one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements
2
-
-
Providng double flanged swing type cast steel sluice valves ASA-300 of leader/BHEL Kirlosker/Kilburn GLED/fourses make and having bye pass arrangement of one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements
2
-
-
Providing double flanged cast steel reflux valves class ASA-300 of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES make and of 65 mm dia having bye pass arrangements for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments.
1
-
-
Providing 100 mm dia circular dial analog pressure gauge of suitable range of Fiebig/Bourden/PREGA/Precision make complete with all accessories such as stop cock, copper tubing etc. as per IS: 3624-1987 with upto date ammendments.
2
-
-
Providing of discharge meter of standred make to be fixed on the rising main in pump house as per the direction of the Engineer-in-Charge as per IS 2373-1981with upto date ammendments
1
-
-
Installation of all the items apparing at serial No. 61 to 83 as per the systematic.
1
-
-
Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer in charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thckness as per IS:2712:1979 and required number of nuts and bolts as per Is:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head stipulated under item No.12. The size of the various components to be as under:
-
-
-
Suction pipe: One dia higher then the suction of the pump offered and suitable to keep the velocity of flow from 1 to 1.5M/second in the suction pipe.
10
-
-
Delivery pipe: One dia higher then the delivery of the pump offered and suitable to keep the velocity of flow from 1.5 to 2M/second in the delivery pipe.
10
-
-
Common headere: One dia higher then delivery of pump X 150 mm dia and will extend upto 5 meter from the outer wall of the pump house in direction to be jointed.
5
-
-
Providing and laying copper PVC insulated armured power cable (one cable carrying all the three phases) of 3 core suitable size and capacity to motors and all other electrical equipments as per IS: 1554(P-I) 1988 or latest with upto date ammendements of siemens/Gloster/IEC/ICC/EICO/ National/ GRANDLY make including all other accessories such as thimble, flaxible pipes, solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor. (Motor side & Supply side).
-
-
-
Motor side (From switch to starter and starter to motor) of suitable size & requirement of HPSEBL authority.
10
-
-
Supply side (From Meter of HPSEB to bus bar and switch) of suitable size & requirement of HPSEBL authority.
10
-
-
Providing and fixing double loop earthing with copper plate 600mmx600x3mm thick electrode complete with material such thimbles nuts and charcoal and common salt, 25mmx5mm copper strips as per IS:3043:1987 with upto date ammendments for motors and other electrical equipments and digging of pits etc. complete in all respect.
1
-
-
"PUMPING MACHINARY. 2nd Stage
Providing horizontal spindle,horizontal/redial split casing/end suction(Back-pull out arrangements) single/double/multi stage centrifugal pump or combination of pumps, In senes/parallel of recommended make such as Mather and Platt/KSB/ Beacon Weir/Kirlosker/BE/Jyob as per BIS 1520-1980 with upto date ammendments, read with IS 9137-1978 or latest edition suitable for lifting water for under mentioned characterestics with bronze impellers/priming funnels casing ring and shaft sleeves of bronze shaft of steel grade 4508 FN8 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel base plate (base plate to be from the manufacturer of the pumping unt only) to slip ring/ squirrel cage screen protected drip proof induction motor /motors of minimum IE-2 efficiency & standard make such as Kirlosker/BHEL /Crompton INGEF /GEC/Siemens/Jyoti /ABB and suitable for operation on 400(+/-)10% volts,50 cycles /second 3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/pumps in the operation range of (+) 10% and (-)15% of the duty point head. The motor/motors as per ISI 325 1978 with upto date ammendments read with IS 900 1972 It should include cost of bearing nuts, bolts and painting etc and should meet the following requirements.
2
-
-
I) Discharge (Q) 5.16 LPS for each pump
-
-
-
II) Total dynamic head 568.05 Mtr.
-
-
-
a) LWL in sump well (h) 1851 Mtr.
-
-
-
b) Shaft level 1850 Mtr.
-
-
-
c) Level at discharge point 2384 Mtr.
-
-
-
d) Suction lift +Ve
-
-
-
e) Dischrage head 568.05 Mtr.
-
-
-
f) Static head 534 Mtr.
-
-
-
III) Rising main
-
-
-
a) Length 3250 Mtr.
-
-
-
b) dia 100 MM
-
-
-
iv) Pumping hours 12 Hours
-
-
-
v) altitude of installation above MSL 1850 mtrs.
-
-
-
vi) Characterstics of water. Clear water with Turbidity upto 50PPM
-
-
-
a) Temperature 20 Degree centigrade
-
-
-
Note: One Pump set working & One stand by
-
-
-
Providing and fixing ICTP main switch with HRC fuses of Kilburn/L&T/Seimen/ Standred/Havells make and having capacity 30% extra of the operationl rating/ as per IS-4064-1978 with up to date ammendments immediately after the power meter of the HPSEB.
1
-
-
Prov. & fixing M.S. sheet,steel fabricated floor mounted closed (almirach type switch board including angle iron post of suitable height and size ISA 40x40x6, duly painted with steel sheet of 16 guage comprising and capable of mounting the following accessories with all internal connections.All accessories should be suitable for the proposed pumping machinery at item NO.1 above and to the entire satisfaction of HPSEB authorities. The same shall have to be replaced with out extra cost if recommended by HPSEB authoroties.
1
-
-
OCB/MCCB of MEI/Havels/standard make and suitable capacity of offered motor on incoming feeder with or without intial oil filling as the case may be with linked under voltage released as per relevent IS code with up to date ammendments.
1
-
-
Earth leakage circuit breaker ELR of recommended make(Kilburn/L&T/MEI/GEC as per IS:2516-1977 with uptodate ammendements and of suitable of range which should have control box, operating,handle and trip/reset bush button on/off indicatorsre-indicating off spring condition of the circuit breaker for over current protection. The circuit should be equipped with magnet thermal release with metallic tape CTS, It should also be fitted with earth fault for tripping of breaker on occurance of earth fault on off breaker load side and.suitable for 60 HP motor.
1
-
-
The voltage meter relay of AE/MEI/L&T/ Havells make 3 phase with all protection and usual indicators and electric siran against single phasing, Low voltage high voltage reverse phasing over loading and phase voltage difference as per IS:3842(latest edition)
1
-
-
Digital 100 mm diameter circular dial A.C. supply volt meter of recommended make AE/IMP/Havells of suitable range with slector switches as per IS:4064-1978 with uptodate ammendements.
1
-
-
Digital Power factor meter of standard make AE/L&T/IMP/Havells as per relevant IS code with up to date ammendments
1
-
-
Digital frquency meter of standard make AE/L&T/IMP/Havells as per relevant IS code with up to date ammendments
1
-
-
Bus bar chamber having three bars of suitable rating for full length equal to the width of the board for three live phases and suitable for induced current, one copper bar of half the rating of full length for netural phase as per IS:8084-1976 and IS:11353-1985 read with BIS-5578-1985 with uptodate ammendements.
2
-
-
Providing ICTP main switch with HRC of Kilburn/L&T /Siemens/Standarrd/Havells make and having capacity 30% extra of operational rating as per IS:4069-1978 with up to date amendments,immediately after the power meter of HPSEBL.
2
-
-
Three phase indicator lamps complete with toggie switches for individual motors as per IS:3452(P-I&II) with upto date ammendements.
2
-
-
Digital 200mm dia circular dia A.C. supply ammeter of A/E/IMP/Havells make of suitable range with selector switches and CTS operated as per IS:1248(P-II) 1983 with upto date amendements.
2
-
-
Capacitor of Mecheil/BHEL/GEC/L&T/ make as per IS 2834-1986 with upto date ammendements, to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code (of Siemens/Clocter/IEC make) from bus bar chamber to capacitor and also including ICPT switches of appropriate upto date ammendements.
2
-
-
Providing suitable oil immersed starter delta/direct on line/auto transformer/. starter rotor starter of MEI/.Kilburn/Jyoti /L&T/Siemens make as per IS:8544:1979 with upto date ammendments for squirrel cage/slip ring motor mounted on panel board with magnetic type over-load release and dashpot, time lag, under voltage release with or without initial oil filling as the case may be with single phae preventor as per IS:1248( P-V) 1983 with upto date ammendments
2
-
-
Providing Digital hour run meter of recommended make and suitables capacity as per IS :722 ( latest edition)
2
-
-
Providing antivibration pads under the pump and motor of suitable size for the above pumping machinery as per IS: 6337: 1971.
2
-
-
Providing double flanged CI sluice valve PN-1.00 of Leader/BHEL/Kirlosker/ GLED/Kilburn /Fourses / Kartar make and equal to dia of suction pipe and capable of withstanding the normal seat pressure as per IS:780:1984 with upto date ammendments.
2
-
-
Providng double flanged cast steel sluice valves ASA-300 of leader/BHEL Kirlosker/Kilburn GLED/fourses make and one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements
2
-
-
Providng double flanged swing type cast steel sluice valves ASA-300 of leader/BHEL Kirlosker/Kilburn GLED/fourses make and having bye pass arrangement of one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements
2
-
-
Providing double flanged cast steel reflux valves class ASA-300 of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES make and of 100 mm dia having bye pass arrangements for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments.
1
-
-
Providing 100 mm dia circular dial analog pressure gauge of suitable range of Fiebig/Bourden/PREGA/Precision make complete with all accessories such as stop cock, copper tubing etc. as per IS: 3624-1987 with upto date ammendments.
2
-
-
Providing of discharge meter of standred make to be fixed on the rising main in pump house as per the direction of the Engineer-in-Charge as per IS 2373-1981with upto date ammendments
1
-
-
Installation of all the items apparing at serial No. 61 to 83 as per the systematic.
1
-
-
Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer in charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thckness as per IS:2712:1979 and required number of nuts and bolts as per Is:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head stipulated under item No.12. The size of the various components to be as under:
-
-
-
Suction pipe: One dia higher then the suction of the pump offered and suitable to keep the velocity of flow from 1 to 1.5M/second in the suction pipe.
10
-
-
Delivery pipe: One dia higher then the delivery of the pump offered and suitable to keep the velocity of flow from 1.5 to 2M/second in the delivery pipe.
10
-
-
Common headere: One dia higher then delivery of pump X 100 mm dia and will extend upto 5 meter from the outer wall of the pump house in direction to be jointed.
5
-
-
Providing and laying copper PVC insulated armured power cable (one cable carrying all the three phases) of 3 core suitable size and capacity to motors and all other electrical equipments as per IS: 1554(P-I) 1988 or latest with upto date ammendements of siemens/Gloster/IEC/ICC/EICO/ National/ GRANDLY make including all other accessories such as thimble, flaxible pipes, solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor. (Motor side & Supply side).
-
-
-
Motor side (From switch to starter and starter to motor) of suitable size & requirement of HPSEBL authority.
10
-
-
Supply side (From Meter of HPSEB to bus bar and switch) of suitable size & requirement of HPSEBL authority.
10
-
-
Providing and fixing double loop earthing with copper plate 600mmx600x3mm thick electrode complete with material such thimbles nuts and charcoal and common salt, 25mmx5mm copper strips as per IS:3043:1987 with upto date ammendments for motors and other electrical equipments and digging of pits etc. complete in all respect.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%