Himachal Pradesh Irrigation And Public Health Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Irrigation And Public Health Department - HPIPH Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date30 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 3,54,37,257
Technical
Technical
Technical Capacity
... View More
The required prior work experience for the bidder varies depending on the project. For irrigation and water supply and sewerage scheme projects, the bidder must employ a qualified Engineer or Junior Engineer or supervisor with 5 years of experience. For Sanitary and Water Supply Works, a Junior Engineer with at least 5 years of experience is required, including at least 1 year in sanitary engineering or water supply works, but only when the tendered cost exceeds Rs.25,000. The value and percentage of similar works completed is not specified, except that the experience requirement for Sanitary and Water Supply Works is triggered when the tendered cost exceeds Rs.25,000.
Costs
EMD
₹ 4,29,373Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Providing Sewerage System To Banjar Town In Tehsil Banjar Distt Kullu Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HPIPH_99010_1Tender No
Sewerage NIT 14675-14774 dt 30.01.2025 Job No-IITender Authority
Himachal Pradesh Irrigation And Public Health Department ViewPurchaser Address
-Website
http://http://hpiph.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Foundation and Plinth complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
211.87
-
-
... More
Providing and laying Cement Concrete M30 (Design Mix) But not less than 1:1.5:3 & Curing Complete exculding the cost of from work and reinforcement for reinforced concrete work complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
-
-
-
... More
In Foundation and Plinth complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
226.22
-
-
... More
Walls (any thickness but not less then 0.10 mm thickness attached pilasters, buttresses, plinth & string courses.) complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
397.4
-
-
... More
In suspended floors, roofs, landing and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
194.12
-
-
... More
Lintels, beams girders bressumers and cantilevers upto floor two level complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
0.63
-
-
... More
Arches upto floor two level complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
0.57
-
-
... More
Providing from work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give fair finish including centering, shuttering, strutting and propping etc. with wooden battens and Ballies height of propping & centering below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in situ reinforced concrete & plain concrete work in
-
-
-
... More
Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc.up to 200mm in thickness complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
277.31
-
-
... More
Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
4878.96
-
-
... More
Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain concrete work in arches upto 6 metres span complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
6.15
-
-
... More
Providing mild steel/ tor steel reinforcement for R.C.C work including bending, binding &placing in position complete upto floor two level complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
50617.64
-
-
... More
Applying cement slurry on RCC Slab or cement concrete work complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
520.9
-
-
... More
Providing and fixing C.I Rungs complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
1172
-
-
... More
Providing & Fixing Pre Cast SFRC Manhole cover having size of 560 mm internal dia (Medium Duty) with in all leads and lifts complete in all respect.
550
-
-
... More
Providing and laying Cement Concrete 1:2:4 (1cement,2 Sand,4 Stone Agrregate 40 mm Nominal Size & Curing Complete exculding the cost of from work and reinforcement for reinforced concrete work complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
-
-
-
... More
In suspended floors, roofs, landing and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
6.86
-
-
... More
2nd Class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement :4 Sand) complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
55.56
-
-
... More
20 mm cement plaster in two coats on rough side of brick /concrete/stone wall for interior plastering upto floor two level i/c arrires.intrenal rounded angles,chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth cement mortar 1:6 (one cement :six sand) inner side i/c cost and carriage of material with in all leads,lifts and other incidentials. complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
168.7
-
-
... More
Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 40mm nominal size) excluding cost of centring & shuttering in complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
-
-
-
... More
Foundation and Plinth complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
1.98
-
-
... More
White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
76.02
-
-
... More
Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm with locking arrangement (Drawing attached) complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
3
-
-
... More
Providing and laying in trenches, galvanized mild steel tubes (light grade), tube fittings (earth work in trenches to be measured & paid for separately).65mm nominal bore complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
2200
-
-
... More
Providing and fixing sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately) 100mm nominal size complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
6
-
-
... More
Providing and fixing Cast Iron Cowl 100mm nominal diameter in complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
3
-
-
... More
Providing and fixing Cast Iron Sluice Valve (IS 14846:2000) make of Kirloskar/Leader/Kartar / pellicon & other all approved make 65mm nominal bore complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
6
-
-
... More
Laying, jointing and testing in trenches to be levelled to grade, centrifugal cement mortar lined ductile iron(spun) pressure pipes confirming to BIS 8923-2000 class K-7,suitable for tyton (push on joints ) including , tees, collars, tapers (if required) crosses, short pieces , tail pieces, plugs of required sizes i/c cutting pieces, chamfering where- ever required (earth work in trenches and cost of joints to be measured and paid for separately) including carriage with in all leads and lifts complete in all respects to the best satisfaction of the Engineer-in-Charge of the following nominal diameters. ( Labour Rate )
-
-
-
... More
150mm dia
6881
-
-
... More
200mm dia
1188.5
-
-
... More
Providing ,Laying , jointing & testing of HDPE pipe (confirming to PE80 PN8 DN160 IS 14333: 1996) in proper position by butt fusion joining procedure including hydraulic testing as per relevant IS Code, complete with all material for joining procedure like butt fusion welding machine with hydraulic jack, top loading clamp etc. pump and accessories for hydraulic testing and all labours as directed by engineer in charge as confirming to IS-7634 (Part II): 2012 amended upto date) complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
-
-
-
... More
160 mm OD of HDPE Pipe (HDPE PIPE PE80 PN8 DN160 IS 14333: 1996) complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
3963
-
-
... More
Providing and fixing double socket flanged Y Tee 150x150 mm Dia as per IS8329--2900 complete in all respect with in all leads and lifts and as per latest amendments or Edition.
264
-
-
... More
Providing and fixing DI Plug 150 mm Dia complete in all respect and as per latest amendments or Edition complete in all respects within all leads and lifts as per the directions of Engineer-in-charge.
264
-
-
... More
Providing and jointing tyton (Push on joints) to Ductile iron pipe and fitting i/c testing of the joints,cost of rubber gasket(EDPM Quality) conferming to IS 3382 (Lastest edition /amendments) complete in all respect with in all leads and lifts.and as per latest amendments or Edition
1985
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%