Himachal Pradesh Horticultural Produce Marketing And Processing Corporation Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Himachal Pradesh Horticultural Produce Marketing And Processing Corporation Limited - HPMC Tender
Civil And Construction
Eprocure
Opening Date20 Jul 2021
Closing Date27 Aug 2021
Tender Amount₹ 18,29,52,551
Costs
EMD
₹ 30,15,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Design, Supply Installation Testing Commissioning Of Equipment Including Civil Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HPMC_50099_1Bid Award Id
ViewTender No
HPHDP HPMC PIU/TURNKEY/CHACHYOT 10Tender Authority
Himachal Pradesh Horticultural Produce Marketing And Processing Corporation Limited ViewPurchaser Address
-Website
http://https://hpmc.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Pre-Engineered Steel Structure Building (PEB) as per technical specification including roofing panel and Lightning arrestor as per detailed specification at para 1.6 & 1.7 , given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement - 4A item no.1
1
-
-
INSULATION FOR CA CHAMBER , CORRIDOR ( ANTE ROOM ) & ABOVE CORRIDOR -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Insulation PUR Sheets for floor insulation in CA Chamber + Corridor ( Ante Room ) as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement • Two layers each 50 mm thick ( Total 100 mm thick) • Thermal conductivity (λ) of the insulating material is at least 0.023 W/(m·K)
• Completed with 50 micron thick Aluminum sheet / 250 Micron PVC Sheet as vapour barrier and blown bitumen of 85/25 grade to be spread @ 1.5 kg/ m2 on each surface ( total 4 surfaces i.e. 6 kg/ m2 . Top layer of minimum 2.4 mm thick bituminized tar-felt.
830
-
-
Insulation PUR panels (As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement for External walls , Internal wall (partition wall) and Ceiling
-
-
-
100 mm thick PUR Panel for external wall , Partition wall , ceiling of CA CS Chambers and plateform in Corridor ( Ante room )
2000
-
-
Panel fixing accessories as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement comprising comprising double edge profiles floor mounting oxidation free material (plastic , SS or panel cladding sheet 0.8 mm thick, Suitable ceiling mounting oxidation free material for carrying ceiling panels and silicon sealent etc. as required
2000
-
-
Gastight coating and flees as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations
• All corner connections (floor-wall, wall-wall, wall-ceiling) within the cells
• All panel joints • Panel joints above evaporator
• Connections around passages, door and hatch
Parts to be treated are cleaned, degreased and primed. Two layers of coating and elastic fleece are used for corner seals and flat seals. The coating used will remain free of fungal development for a period of at least 10 years. Guarantee for period of 5 years for gastightness a maximum leakage size of 0.20 cm2 / 100 m3; testmethod described
1
-
-
Wall protection a s per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations applied less than 120 mm from wall. Posts of stainless steel U-100 at a foot plate 80/150/10 mm, height 500 mm, galvanised, column spacing approx. 1.500 m, with adhesive anchors fixed in the floor. Beam in stainless steel profiling at least 180 (height)/10 mm
299
-
-
CA doors of size 2500 mm (W) x 3500 mm (H) with lockable control window of size 600 mm (W) x 800 mm (H) complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
Manual Horizontal Sliding Doors of sizes as per drawings complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement for corridor ( Ante Room )
2
-
-
Anti-collision bollards of steel to reject collision loads in the reveal area of the CA and Ante room doors, consisting of an approx. 140 mm thick steel pipe, approx. 100 cm high, with foot plate doweled to the concrete floors. Material: hot-dip galvanised. ( 2 Piece / door)-a s per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations
22
-
-
REFRIGERATION PLANT as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Refrigeration compressor of capacity 70 KW at minus 10 deg C SST and 35 deg C DST complete with accessories as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
3
-
-
VFD Drive for one compressor only - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
2
-
-
Oil Separator (one per compressor) - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement • Collection
• Filtering
• Levelling
3
-
-
Evaporative Condenser (capacity at 10 K, Tc 35 deg C) 200 KW including fans , valves fittings, controls and electricals etc. as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
HP Ammonia receiver suitable for 200 KW refrigeration capacity as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement including safety relief valves , gauge glass ,air release valves ,controls and water sprinkler etc.
1
-
-
Heat exchangers/cooler units - Single sided blow through type, ceiling supported as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 4.1.1 B of following sizes/ capacities
-
-
-
CapacityHeat exchangers/cooler for room storage capacity :85 MT room • Cooling capacity at -8/8K TV1 - 40 KW
• Minimal air volume (m3/hour) - 19,250 CMH
• Minimal width - 4,000 mm Maximum height = 750 mm
6
-
-
Constructive material to fix coolers to the ceiling . Fastening material (threaded ends) shall be of stainless steel -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Curtain left and right next to cooler as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and shall include:
• Length under cooler 1,200 mm
• Strong material (f.e. PVC Bisonyl tarp)
• Constructed (weighted) that suction by airflow is prevented.
6
-
-
Ammonia and Propylene Glycol valves, controls, fittings, nut bolt and gasket -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
MS "C" pipes and fittings for refrigerant piping-as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
GI "B" class pipes & fittings for water piping -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Propylene Glycol PHE Chiller of capacity 200 KW -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement , complete with controls & accumulator
1
-
-
Propylene Glycol Storage Tank with two compartment of suitable storage/ operational capacity at 200 KW refrigeration load -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Propylene Glycol Primary Pumps ( 1 W +1 S)- as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement .
2
-
-
Propylene Glycol Secondary Pumps ( 1 W +1 S)-as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement .
2
-
-
VFD Drive for Primary & Secondary Glycol Pump- as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
4
-
-
Propylene Glycol Flow control valves including pumps for each chambers-as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
Refrigerating PLC control system -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement , Complete with PLC and PC, LCD monitor & Windows 12 PRO including printer and internet connection ,Software licence
1
-
-
Temperature Sensors PT1000 , at least 4 temperature sensors / CA chambers -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
Defrost water measuring system as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
Electrical Panel with Automatic power factor controller Panel ( APFC Panel with adequate capacitors to maintain p.f. ≥ 0.95 ;as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia leak detection system- as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia Safety system -as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Ammonia, lubricant and propylene glycol- as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
CONTROLLED ATMOSPHERE (CA) PLANT & EQUIPMENT -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Central Auto analysing & monitoring equipment O2 and CO2 paramers As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement comprising:
• Complete with PLC and PC, LCD monitor & Windows 12 PRO including printer and internet connection
• Software licence
• Placed in the room for CA equipment
• Sampling tube per room with filter (6/8 mm)
• Sampling frequency per room at least once per 90 minutes
• Manual and automated calibration• The CA system is equipped with the opportunity to test rooms for gas tightness
• Possibility for instand extra measurement per sampling point
• Control of CO2 by fresh ait inlet (aeration) during filling and emptying CA room
• Adjustable action times (N2, O2 and CO2 per 0.1% deviation from set point)
• Scrubber specific settings (absorbing, regenerating times) Sampling 06 CA room, the corridor(s)
scrubber lung(s), purity of N2 machine
technical room and outdoor condition.
1
-
-
CA registration system -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement comprising Registration of settings, values (hourly)
• Output in print and digital registration
• Graphs
1
-
-
Automated analysers as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement comprising • O2 analyser (0-21 % range, 0.1 % reliable)
• CO2 analyser (0-5 % range, 0.1 % reliable)
• Both analysers equiped with display
1
-
-
Calibration gases (bottles) 20 ltr including pressure regulator per bottle. 3% O2 / 0% CO2
1% O2/ 1% CO2
2
-
-
Active Carbon Scrubber as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.5.2 at level of 3 % CO2 based on control of 500 MT "Royal Delicious Apples" at level of 1 %.
1
-
-
Nitrogen machine (PSA) OF CAPACITY 25 Nm3 at 99 % purity completewith buffer tank 500 Ltrs and Temperature protection as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Aeration ventilator with recoil valve capacity atleast 250cum/hr
• Fixation flanges will be used both sides passing insulation of CA room
6
-
-
Air compressor for controlling pressure valves scrubber system and valves per CA room
• Including autodrain and condensing dryer
• Inclusing tubing 6/8 mm to all valves
• Maximal over pressure: 7.5 Bar
1
-
-
Scrubber piping in PVC • Including gastight passing in CA room
• Entrance in CA room behind cooler
• Fixation flanges will be used both sides passing insulation of CA room
1
-
-
Piping/tubing network for N2 distribution including electrical valve per CA room . Injection Valve 1/2" and piping minimal 20 mm
1
-
-
Air Buffer (lungs) complete with piping flanges -
6
-
-
Over- and under pressure valves (combined with buffer lung) -
6
-
-
Sampling tube/valve with connected milimeter water column pressure gauge to be used for hand analysing O2 and CO2
6
-
-
Testing tube with cap- 50 mm
6
-
-
Portable O2 and CO2 analyser
• Range 0-25 % O2
• Range 0-10% CO2
1
-
-
Penetrometer for firmness test of Apples
1
-
-
Refrotometer for testing SSC% of Apples
1
-
-
Core temperature measurement thermometer for apples.
1
-
-
Starch test equipment including Lugol (Potassium Iodide solution)
1
-
-
Electrical Panel with Automatic power factor controller Panel ( APFC Panel with adequate capacitors to maintain p.f. ≥ 0.95 ; similar in design as per details given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement except that only one spare feeder of 63 Amp. and Change over switch for DG Sets.
1
-
-
ELECTRICALS , PIPE SUPPORTS AND PIPE & EQUIPMENT INSULATION FOR REFRIGERATION & CA PLANT EQUIPMENT - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Cables , Cable tray , earthing pits etc. for complete referigeration & CA equipment as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 5.3.8 & 5.3.9
1
-
-
Pipe supports including for AHU , Condenser , Refrigeration and CA piping etc.as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.4.1.1 A(aa). The job includes bridge type supports for piping wherever necessary including civil foundfation for supports
1
-
-
Pipe line insulation with in-situ PUF including for Propylene Glycol Storage Tank & Aluminum cladding. All piping (as well glycol and NH3) carrying cold coolants, are insulated with PU scales 2 x 40 mm. Above 90 mm diameter 2 x 60 mm PU scales. At the position of brackets and suspension points, the insulation is sealed and vapour-tight. Valves, pumps and other fittings may remain uninsulated. - as per detailed given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.4.1.1 A ( r&s) and 4.1.1 H (i)
1
-
-
Supply , design and installation of electrical items (POLE, CIRCUIT BREAKERS, PANELS AND TRANSFORMER) AS MENTIONED IN THE Annexure E (Emploers requirement)
1
-
-
EQUIPMENT FOR SORTING , GRADING AND PACKING LINE FACILITYE- A s per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
-
-
-
GRADING & PACKING LINE – TOTAL CAP: 5000 KG/ HR. as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
SINGLE HEAD AUTOMATIC DRY BIN FILLER with two pallet positions - as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
3
-
-
WOODEN BIG BINS FOR APPLES- as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
Wooden bins for apple -as per technical specifications given in employerss requirement
1700
-
-
MATERIAL HANDLING EQUIPMENT -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no. 5
-
-
-
BATTERY OPERATED FORK LIFT including spare battery set - As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
HAND OPERATED PALLET MOVER - As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
6
-
-
MISCELLANEOUS EQUIPMENT EQUIPMENT -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement -4A
-
-
-
160 KVA DG Set -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
50 KVA DG Set -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Air Curtains -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
2
-
-
50 Kg platform type weighing scale -As per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
3
-
-
Schedule No. 3: Design Services
-
-
-
Submitting vetted design and drawings of civil works along with Geo technical investigation and topographical survey as mentioned in the employers requirement.
1
-
-
submitting vetted design and drawings/ layout of mechanical works as mentioned in the employers requirement.
1
-
-
Schedule No. 4: Installation Services
-
-
-
PRE- ENGINEERED BUILDING ( PEB) STEEL STRUCTURE -as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement item no.1
-
-
-
Installation , testing , commissioning & handing over of Pre-Engineered Steel Structure Building (PEB) as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement
1
-
-
Installation , testing , commissioning & handing over PUR panels for External walls , Internal wall (partition wall), External wall of pack-house and Ceiling of CA Chamber & Corridor (Ante Room)-Employer requirement
-
-
-
Installation , testing , commissioning & handing over of Floor insulation in CA Chasmbers and Corridor ( Ante Room ) as required with PUF Insulated sheets as per employers rerquirement
830
-
-
100 mm thick PUR Panel for external, partion wall , ceiling and plateform in Corridor ( Ante room )
2000
-
-
Gastight coating and flees as per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations
1
-
-
Wall protection a s per technical specification given in Part-2- Employers' Requirement in Section-VI - and in accordance with ISO 6949 regulations applied less than 120 mm from wall. Posts of stainless steel U-100 at a foot plate 80/150/10 mm, height 500 mm, galvanised, column spacing approx. 1.500 m, with adhesive anchors fixed in the floor. Beam in stainless steel profiling at least 180 (height)/10 mm
299
-
-
CA doors of size 2500 mm (W) x 3500 mm (H) with lockable control window of size 600 mm (W) x 800 mm (H) complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI
6
-
-
Manual Horizontal Sliding Door for Corridor ( Ante Room ) of size 2500 mm (W) x 3500 mm (H) complete in all respect as per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Anti-collision bollards of steel to reject collision loads in the reveal area of the CA doors, consisting of an approx. 140 mm thick steel pipe, approx. 100 cm high, with foot plate doweled to the concrete floors. Material: hot-dip galvanised. ( 2 Piece / door)-a s per technical specification given in Part-2- Employers' Requirement in Section-VI - Employers' Requirement and in accordance with ISO 6949 regulations
22
-
-
Installation , testing , commissioning & handing over of Refrigeration Plant & Equipment complete in all respect including electricals, pipe supports and pipe & equipment insulation as required and as per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Installation , testing , commissioning & handing over of Controlled Atmosphere Plant & Equipment complete in all respect including electrical panels & all electricals required for completing installation , pipe supports and pipe & equipment insulation as required andas per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Installation , testing , commissioning & handing over 82.5 KVA DG Set and 160KVA DG SET -As per technical specification given in Part-2- Employers' Requirement in Section-VI
1
-
-
Air Curtains -As per technical specification given in Part-2- Employers' Requirement in Section-VI
2
-
-
Installation of Organic Waste Connvertor and odour control system
1
-
-
Schedule No. 5: Civil Works and ESHS
-
-
-
Clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of any girth and removal of rubbish upto to all distances outside the periphery of the area cleared as per the direction of Engineer-in-Charge.
3430
-
-
Felling trees of the any girth including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable materials for al distances as per the direction of Engineer-in-Charge.
37
-
-
Earth work in surface excavation (Hydraulic excavator)/ manual means over areas for all kinds of soils including getting out and disposal of excavated earth for all lead & lifts, as directed by Engineer-incharge.
4342.91
-
-
Earth work in excavation of foundation for structure for all kinds of soils as per drawing and technical specification including setting out,construction of shoring and bracing removal of stums and other deletarious materials, dressing of sides and bottom, backfilling of the excavated earth to the extent required upto all lead and lifts as per the direction of Engineer-in-Charge.
195.51
-
-
Excavation in soil in Hilly Area by mechanical means for all kinds of soils including cutting and trimming of side slopes and disposing of excavated earth including all leads, lifts and other incidentals, as per approved specifications, drawings, design and as directed by the Engineer in Charge.
1016.43
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers of 15 cm, consolidating each deposited layers by ramming and watering, for all leads & lifts as per direction of Enginner in charge
6268.74
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth/above level : 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) as per direction of Engineer in charge
791.85
-
-
Supplying & Filling in plinth with sand under floors including watering,ramming,consolidating and dressing complete as directed by the Engineer-in-charge.as directed by the Engineer-in-charge.
210.48
-
-
Providing,Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment with Chlorpyriphos/Lindane/or its equivalent E.C. 20% with 1% concentration for soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm dia Meter holes and plugging with cement mortar 1 :2 (1 Cement: 2 Coarse sand) to match the existing floor all complete as per specification and as directed by the Engineer-in-charge.
1463
-
-
Design mix M-25 grade cement concrete for reinforced cement concrete work (Minimum Cement content should be more than 330kg/cum) , using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
All works upto plinth level
660.1
-
-
All works above plinth level upto all floor level
467.49
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more as per direction of Engineer-in-charge.
135578
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth Cement mortar 1:6 (1 cement : 6 coarse sand) as per direction of Engineer-in-charge.
62.15
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) as per direction of Engineer-in-charge.
179.39
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up all floor level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) as per direction of Engineer-in-charge.
208.45
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level.Cement mortar 1:4 (1 cement :4 coarse sand) as per direction of Engineer-in-charge.
375.87
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, Including applying priming coat of approved steel primer. M.S. tube as per direction of Engineer-in-charge.
660.4
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: (for outer plaster) 1:6 (1 cement: 6 coarse sand) upto all floor leve complete in all respect as per direction of Engineer -in -Charge
846.16
-
-
12 mm cement plaster of mix : (for Inner plaster)1:6 (1 cement: 6 coarse sand) 1:6 (1 cement: 6 coarse sand) upto all floor level in all respect as per direction of Engineer -in -Charge
1728.17
-
-
6mm Cement plaster of mix (for ceiling plaster) In Cement mortar 1:3 (1 Cement:3 fine Sand) upto all floor level comlete in all respect as per direction of Engineer -in -Charge
705
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm of required thickness and 1st quality conforming to IS : 15622, approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. in all respect as per direction of Engineer -in -Charge
53.33
-
-
Providing and fixing of Ist quality ceramic glazed wall tiles conforming to IS: 15622 of required thickness and approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. in all respect as per direction of Engineer -in -Charge
548.86
-
-
Providing and laying of Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : in all respect as per direction of Engineer -in -Charge
24.75
-
-
Providing and layingKota stone slab 20 mm thick in risers of steps, skirting, dado pillars laid on 12mm (average) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete in all respect as per direction of Engineer -in -Charge
4.4
-
-
Providing and laying vetrified floor tiles in different sizes of required thickness with water absorption less than 0.08% & confoeming to IS: 15622, of approved make in all colours & shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement & matching pigments etc. complete.(Size of tile 600*600 mm) in all respect as per direction of Engineer -in -Charge
155.57
-
-
Painting steel work with Multi surface paint to give an even shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr /10 sqm of approved brand & manufacture in all respect as per direction of Engineer -in -Charge
114.44
-
-
Finishing walls with Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in all respect as per direction of Engineer -in -Charge
846.16
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all respect as per direction of Engineer in charge.
2730.48
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer complete in all respect as per direction of Engineer in charge.
1884.32
-
-
Providing and fixing aluminium sliding door bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) , transparent or dyrd to required colour or shade with nuts screws etc complete.(250x16mm) complete in all respect as per direction of Engineer in charge.
18
-
-
Providing and fixing aluminium tower bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) , transparent or dyrd to required colour or shade with nuts screws etc complete.i)(150x10mm) complete in all respect as per direction of Engineer in charge.
36
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in- Charge.Anodized (AC) aluminium tubular handle bar complete in all respect as per direction of Engineer in charge.
36
-
-
Chequred terrazo tiles 22 mm thick with graded marble chips of size upto 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing & polishing complete on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade pigment using 50% white cement, 50% ordinary cement complete in all respect as per direction of Engineer in charge.
13.52
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 80x1.25 mm M.S. laths with 1.25 mm thick top cover complete in all respect as per direction of Engineer in charge.
42
-
-
Providing and fixing ball bearing for rolling shutters
8
-
-
Providing and laying cement concrete tremix flooring, using truss screed beam (7 mtr - 10 mtr span) 150mm thick with cement concrete mix M-25 (RMC without flyash and slump of concrete should be 120 mm at site) and sprinkled with floor hardner of BASF Master Top 410 @ 3.0kg per sq.m. over vaccum dried concrete,including laying of steel as per design with 20 mm steel TMT shear dowel and PVC pipe sleeve cover @600mm c/c running in all direction in costruction joint and dosage of A.R glass fibre(Glassman) @ 1.00 kg/cum, complete the job in all respects.The LDPE sheet of 250 micron thick of approved quality shall be used at the base of trimix flooring. Process shall consist of laying out of panels, placing side form channels to true and proper level on cement mortar bed, poker vibrating the concrete followed by at least two passes of screed vibrator, followed by one pass of leveling beam, all using 2 to 3 mm flat on sides to allow for shrinkage on dewatering the consolidated slab, floating the vacuumed slab with one pass of skim floater, finishing with at least two passes of trowel using skim floater to give desired finish. Rienforcement steel shall be paid only as per the item no 3.3, If any . The applicator for tremix flooring shall be as per make list complete in all respect as per direction of Engineer in charge.
1263.4
-
-
Provinding centering and shuttering including strutting, propping
etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
929.12
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts in any floor level
2000.28
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers in any floor level
1302.86
-
-
Suspended floors, roofs, landings, balconies & access platform in any floor level
713.09
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth & string courses
7.92
-
-
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick complete in all respect as per direction of Engineer in charge.
10.24
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 , minimun anoidic coating of grade AC 15) in all respect as per direction of Engineer in charge
407.85
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. With float glass panes of 4.0 mm thickness
(weight not less than 10 kg/ sqm) complete as per the architectural drawings and the directions of Engineer-in-charge.
62.13
-
-
Providing and fixing For shutters of doors, windows & ventilators of required guage including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 , minimun anoidic coating of grade AC 15) complete in all respect as per direction of Engineer in charge.
259.62
-
-
P/F board partitions with butt jointing and nails (Prelaminated board bwp phenolbonded exterior/ grade both sides. 12mm thick) complete in all respect as per direction of Engineer in charge.
42.04
-
-
Providing & laying Cement concrete flooring 1:2:4(1 cement: 2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry 40mm thick with 20 mm nominal size stone aggregate complete in all respect as per direction of Engineer in charge.
64
-
-
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars,ladders,railling,brackets, gates and similar works. ( For Stairs & Gate) in any height /floor complete in all respect as per direction of Engineer in charge.
3585.24
-
-
Providing weepholes in brick masonry/stone masonry/plain reinforced conrete abutment,wing wall, return wall with 100 mm dia. PVC pipe extending through the full width of the structures with slope of 1(v) : 20 (H) towards drainage face complete as per drawing and technical specification clauses including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge.
1106
-
-
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge.
787
-
-
Back filling behind retaining wall/breast wall complete upto NGL level with grannular material including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge
1179.54
-
-
Construction of granular subbase by providing well graded material, spreading in uniform layers with Tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Clause 401 (For Grading II Material) including all leads, lifts and other incidentals, as per approved specifications, drawings, design and as directed by the Engineer in Charge.
161.96
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :.1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 40 mm nominal size) complete in all respect as per direction of Engineer in charge.
15.21
-
-
Providing and laying 80mm thick factory made cement concrete interlocking paver block M-35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour & pattern over &ncluding 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
1619.55
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage complete in all respect as per direction of Engineer in charge.
-
-
-
For horizontal surface one coat @1.10 kg per sqm.
42.26
-
-
For vertical surface two coats @ 0.70 kg per sqm
45.4
-
-
Providing and fixing Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 complete in all respect as per direction of Engineer in charge.
2
-
-
Providing and fixing Tata Steel EzyNest 9ft * 4 ft modular toilets (3 toilet in row), Unit Size 1220 mm x 2745 mm x 2050 mm. WALL:Zero spangled cold rolled 120 GSM Galvanised (Galvano) powder coated 40 mm thick EPS panels ( EPS Density - 16 KG /m3, EPS thickness - 38 mm, Steel sheet thickness - 0.6 mm, 275 MPA), bottom 3 side panel SS304 grade layer up to 10 /12 inchs, CEILING: Zero spangled cold rolled 120 GSM Galvanised (Galvano) powder coated 40 - 70 mm thick taper roof EPS panels ( EPS Density - 16 KG /m3,EPS thickness - 38 mm, Steel sheet thickness - 0.6 mm,275 MPA), FLOOR: Anti Skid tile finish floor inside toilet only, DOOR: Zero spangled cold rolled 120 GSM Galvanised (Galvano) powder coated with necessary stiffeners and Aluminium accesories (2 Al handles, 1 Al tower bolt, 1 Al L-drop). Door Size - 1790 mm * 655mm (Steel sheet thickness - 0.6 mm, 275 MPA), FASTNERS: Galvanised fastners, 2 Al handles, DOOR ACCESSORIES :1 Al tower bolt, 1 Al L-drop, VENTILATION: 3 side Zero spangled cold rolled 120 GSM Galvanised (Galvano) powder coated louvre panel for cross ventilation with EPS insulated panels. Provision for natural light above door, IWC: Provision of Indian Pan orissa pattern with antiskid tiled florring, PLUMBING: 1 PTMT Tap in each compartment, 200 Litre water Tank with tank frame, required pipes & necessary fitments, TAP: 1 PTMT Tap for each unit and 1 PTMT tap for each wash basin, WATER SUPPLY CONNECTIONS: PVC Pipe connection with all toilets interconnected and single inlet water supply point for Toilet, WASTE MANAGEMENT: Twin Leech pit with Insepction chamber : 1000mm dia and 1200 mm deep, made out of 40-50mm thick concrete rings/brick work with sufficient holes for the Leech pit to function effectively. 3" Thick RCC slab as top cover, made of 1:4:8 C:S:A. MS rings to be provided for lifting of slab complete in all respect as per direction of Engineer in charge.
2
-
-
INTERNAL/ EXTERNAL LIGHTING WORKS
-
-
-
200 PVC INSULATED HEAT RESISTANT FLAME RETARDANT AND LOW SMOKE (HRFRLS) COPPER CONDUCTOR WIRING IN PVC CONDUIT.Wiring for light point / fan point / exhaust fan / call bell point with 1.5sqmm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required: Group C
170
-
-
Wiring for twin control light point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLSPVC insulated copper conductor single core cable etc as required.
50
-
-
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
600
-
-
Wiring for power plug with 2x4 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC Conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
300
-
-
Wiring for power plug with 4x4 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC Conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
140
-
-
Wiring for circuit/sub-main with following size pve insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / rccessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same Size for earthing as
-
-
-
2x1.5 Sq mm (For Light CKTs / Secondary Light Point)
900
-
-
2x2.5 Sq mm (For Chamber Light)
550
-
-
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sirgle core (flexible) copper conductor cable in surface / recessed PVC conduit along with 2 No.10 Sq.mm. (4x10 + 2x10) HRFRLS/PVC insulated single core copper
75
-
-
Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke sirgle core (flexible) copper conductor cable in surface / recessed PVC conduit along with 2 No.16 Sq.mm. (4x16 + 2x16) HRFRLS/PVC insulated single core copper
200
-
-
600 SUPPLYING AND FIXING PVC CONDUITS: Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and maing good the same in case of recessed conduit as required :50 mm dia
100
-
-
800 SUPPLYING AND FIXING METAL BOXES: S/F Metal boxes following sizes (nominal size) on surface or recessed suitable for fixing phenolic laminated sheet cover in front including painting etc. as as required:
-
-
-
200mm x 150mm x 75mm deep
10
-
-
250mm x 300mm x 100mm deep
6
-
-
900 ERECTION OR FITINGS AND ACCESSORIES: Supplying and fixing GI Modular box of (100mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular socket, outlet and 5/6 amps modular switch connections etc. as required.
25
-
-
Supplying and fixing G.I. Modular box of (100mmx75mmx50mm) size with modular plate and cover In recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch connections etc. as required.
10
-
-
Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.
1
-
-
Supplying and fixing bakelite batten/angle holder including connections etc as required:
1
-
-
Supplying and fixing GI Modular box of (75mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular switch, connections etc. as required.
30
-
-
Supplying and fixing GI Modular box of (100mmx75mmx50mm) size with modular plate and cover in recess including providing and fixing pin 5/6 amps modular 2way switch, connections etc. as required.
12
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
500
-
-
32 mm
50
-
-
40 mm
50
-
-
1000 METAL BOARDS FOR SWITCH GEAR MOUNTINGS: Supplying and erection of following depth, sheet metal cubical pedestal of suitable' dimensions 'with plus-minus 5 cm variation, made from 1.6 mm thick. MS sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement with sufficient. No vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15cm high from ground level and 45cm thick. The cubical pedestal shall be 15cm from the top of cement concerete platform. 300 mm deep (nominal)
2.2
-
-
1300 SUPPLYING AND FIXING OF BUS BARS IN THE EXISTING CHAMBER / CUBICAL Copper Busbar-Supplying and fixing copper strip bus-bars suitable for 200A 415V capacity 4No. Each of cross-sectional area (25.4mm x 4.75mm), in each existing enclosure or cubical with all accessories including
2.2
-
-
1600 MOULDED CASE CIRCUIT BREAKERS AND AIR CIRCUIT BREAKERS: Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubical panel making connections, etc. as required
-
-
-
63A / 40A - 16KA
4
-
-
160A - 16KA
1
-
-
1700 MINIATURE CIRCUIT BREAKES / RESIDUAL CURRENT CIRCUIT BREAKERS: Supplying and erection of 6 amps to 32 amps rating, 10KA breaking capacity, 240V, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections
-
-
-
Single Pole Cat-A
40
-
-
Double Pole Cat-A (20A)
6
-
-
Triple Pole Cat-A (32A)
1
-
-
Supplying and fixing 20 amps, 240 volts, SPN moulded type, socket outlet, with 2 pole and earth, enclosed plug top along with 20 amps "C" curve, SP, MCB, in moulded enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
6
-
-
Supplying and erection of 40/50/63 amps rating, 10KA breaking capacity, 240V, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections: Triple Pole & Neutral Cat-A (63A)
1
-
-
Supply and fixing 30A 415V TPN industrial socket outlet, 4-pole and earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 30A TPN-MCB on surface or in reecss, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.
7
-
-
1800 MCB DISTRIBUTION BOARDS: Supplying and fixing of following way single pole and neutral sheet steel MCB dislribution board 240V on surface / recess complete with tinned copper bus. bar. wire-set, neutral link. earth bar, din-bar, detachable gland plate, cable. identification labels interconnections phosphatized and powder painted including earthing as required. Double Door-6 Way
2
-
-
Supplying and fixingof following way triple pole and neutral. sheet steel MCB dislribution board. 415V on surface / recess. with provision for 4. pole MCB/lsolator/RCCG/RCBO as incomer and sr MCBs as outgoing, complete with tinned copper bus. bar. wire-set, neutral link. earth bar, din-bar, detachable gland plate, cable. identification labels interconnections phosphatized and powder.Double Door-4 Way (8+12) horizontal
2
-
-
1900 EARTHING AND LOOP EARTHING:
-
-
-
GI Electrode Earthing with 80 mm dia and 3 meter length, The electrode should be hot-dip galvanized with 120-150 micron. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 50 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification .GI Electrode Earthing should be maintenance free and dose not required regular manual addition of water. GI Electrode Shall be tested from CPRI.The earting pit should be cover with FRP cover, of 300 x 300 mm.GI Electrode earthing should be as per approved list of makes.
10
-
-
Supplying and fixing 25mm x 5mm copper strip on surface or in recess for earthing connection etc. as required
50
-
-
Supplying and fixing 25mm x 5mm GI strip on surface or in recess for earthing connection etc. as required
230
-
-
2000 LIGHTENING CONDUCTOR: Providing and fixing of Lightning conductor finial, made of 25mm dia 300mm long GI tube, having single prong at top, with 85mm dia 6mm thick GI base plate including hole etc. complete as required.
6
-
-
Riveting, sweating and soldering of copper / GI tape with another copper / GI tape base of the finial or any other metallic object as required.
10
-
-
Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall for lightening conductor as required (for vertical run)
100
-
-
Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall for lightening conductor as required (for horizontal run)
230
-
-
Supplying and laying of GI tape 32mmx6mm thick from earth electrode to directly in ground as required.
50
-
-
2100 UNCLASSIFIED ITEMS: Providing and fixinng MV danger notice plate of 200mm x 150mm made of mild steel at least 2mm thick and vitreous enameled white on both sides and with inscription in signal red color on front side as required
4
-
-
2200 ALUMINIUM CONDUCTOR PVC INSULATED ELECTRIC ARMOURED CABLES: Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured / XLPE power cable, working voltage 1100V grade on surface etc. of the required size
-
-
-
Armoured Cable 6sqmm (twin core)
230
-
-
Armoured Cable 70sqmm (3.5 core)
25
-
-
Cu cable Armoured Cable 35 sqmm (3.5 core)
50
-
-
2500 PROVIDING AND INSTALLATION OF CEILING / EXHAUST FANS: Providing and installation of exhaust fan of following sizes in the existing opening, including' making the hole to suit the size of the above fan. making good the damages. connections. Testing and commisslonina etc as reauired: Exhaust fan, heavy duty 380mm sweep including suitable Louver
2
-
-
2700 SUPPLYING AND FIXING OF WALL BRACKETS / CEILING FITTINGS: Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder(s), complete with all accessories but excluding CFL lamp including making connections. testing etc as required: Bulk Head Fitting, CFL type (Category - A)
1
-
-
2800 Supply and erection of Poles: Supplying and erection of street light bracket made of GI pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt and nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over prming coat complete in all respects as required. 40mm dia GI pipe heavy class
9
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of up to 150 sqmm size in the existing RCC/ HUME/ METAL pipe as required. (Laying of MV Cables)
230
-
-
CABLE TRAY AND RACE WAY: Supply, laying & fixing 14 SWG single compartment GI race way of following sizes along-with necessary cable support system as directed including fixing accessories like dash fasteners cable ties and junction box etc. complete in all respects including earthing of trunking with 4sqmm. PVC insulated wires including cutting chasing of floor and making of good (cutting of floor by machine).GI Race ways shall be minimum 20mm below floor finish as required as per approved drawings, specifications of this tender and directions of Project Manager.
-
-
-
40x 300 x 40mm deep
75
-
-
50 x 225 x 50mm deep.
25
-
-
Supplying & installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5%, in convinient sections,joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
600 mm width x 62.5 mm depth x 2.0 mm thickness
100
-
-
450 mm width x 62.5 mm depth x 2.0 mm thickness
25
-
-
DISTRIBUTION BOARD & 3 PHASE METER & SUB MAIN DISTRIBUTION BOARD (SMDB): Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board double door of sheet steel, dust protected, duly powder painted, inclusive of 80 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 40A / 63A TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars ( with 6 MCB’s/ MCCB) as required.
-
-
-
12 Way TPN DB Double Door (Vertical)
2
-
-
S/I/T/C sheet steel inclosure for 32-63Amp TPN MCB complete with all accessrories as required.
18
-
-
MULTIFUNCTION METER: S/I/T/C 3 Phase Multifunction Meter, L&T, 4410 LED, Class 0.5 with RS 485 along with 3 Nos. CTs of 100/5A Class-I and 3 phase indicator lamps, internal wiring with copper flexible wire, all connections, testing, commissioning and other petty material required to complete the job including labour charges or erection in existing cubical panels with cost of cutting the panel sheet and din bars etc.
2
-
-
LIGHTING FIXTURES: Supply, Carriage, erection, testing and commissioning of LED fitting. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from NABL I UL accredited laboratory for LM79 & LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor 0.9, THD 10%. The sample of fitting shall be got tested in the presence of representative from NABL I UL accredited laboratory and the testing fee shall be borne by the contractor / supplier.
-
-
-
S/E of 40W LED Liner fitting surface mounted. made of extruded aluminium heat sink body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230V, 50 HZ supply, high efficent fixtures complete in all. The job includes cost of cutting the false ceiling to fix the fitting including giving support of chain from ceiling or frame and making connection to the nearest point with copper wires.
30
-
-
S/E of 40W LED Liner fitting surface mounted. made of extruded aluminium heat sink body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230V, 50 HZ supply, high efficent fixtures IP65 complete in all. The job includes cost of cutting the false ceiling to fix the fitting including giving support of chain from ceiling or frame and making connection to the nearest point with copper wires.
85
-
-
S/E of Surface Mounted LED 40 W Fitting Panel of size 4' foot long complete with driver. The fitting is to be fixed on ceiling with anchor fasteners.
40
-
-
S/E of Self contained with 8W fluorescent tube for non maintained emergency lighting for 3 hours duration Complete as required.
12
-
-
S/E of 230/48Volts 440AH ,Battery charger with rectifier, DC Ammeter, DC Voltmeter and common DC bus for DC supply to battery.
12
-
-
12W LED round fitting recess mounted. The The job includes cost of cutting the false ceiling to fix the fitting including making connection to the nearest point with copper wires.
10
-
-
S/I/T/C of LED street light light fitting of 70W / 72W rating with minimum 110 lumens per watt. The fitting is to be fixed on existing bracket mounted on Pole. The job includes cost of fitting, wiring connection etc. required to complete the job.
10
-
-
Supply ,Fixing, testing and commissioning of internal road light poles including the cost of providing top 70mm and bottom 130mm dia 3 mm thick 200x200x12mm MS base plate welded to the base of the pipe , Arm Length 1000mm and including digging and including the cost of masonry base pedestal built with 1:3:6 concrete (1 cement, 3 coarse sand and 6 graded stone aggregate 40 mm nominal size) provided with a 200 mm x 150 mm x 100 mm deep looping cable GI box recessed in the base pedestal / surface mounted fabricated from 14 SWG GI sheets with hinged gas kitted lockable door, terminal block for incoming and outgoing PVCA cables, 10 amps SP MCB, 2 Nos. suitable length 25mm dia GI pipe for incoming and outgoing cables and including the cost of painting, wiring, in pole from terminal block up to the light fittings with 2 x 2.5 sq.mm copper conductor 1100 volt grade PVC insulated wires along with loop earthling with 1 no. 8 SWG GI wire, earth stud etc. complete as required and as below. IS2713-PART II. 6 mtr Long Swaged Pole. Planting depth shall be 600 mm. Height above ground shall be 5.4 metres including MCB & M.S. box etc. as required.
9
-
-
S/I/T/C of LED street light light fitting of 25W rating with minimum 110 lumens per watt. The fitting is to be fixed on existing bracket mounted on wall. The job includes cost of fitting, wiring connection etc. required to complete the job. Wall mounted fixture
1
-
-
ADDRESSABLE FIRE DETECTION & FIRE ALARM SYSTEM WITH PA: Supply, installation, testing and commissioning of Microprocessor based intelligent analogue addressable, modular, expandable networkable, following loop (each loop consist of Minimum 99 detector & 99 devices) fire alarm control panel with minimum 6 inch LCD display, multiple access levels, event history file in non-volatile memory (EEPROM). The panel shall have a built-in integrated voice command center with suitable rating amplifier for 25 Nos. of speakers. The panel shall support programmable relay for controlling lifts, staircase pressurizations fans, lift shaft & lift lobby pressurization fans, toilets exhaust fans, ventilation fans, monitoring of fire sprinkler and fire hydrant pump controlled by powerful Boolean logic equation. The panel shall have minimum five independent hazard release circuit built-in the panel. The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 4 hours during emergency condition i /c interfacing connectivity (BAC Net/modbus gateway) in Fire Panel for integrating with building management system complete . The panel shall be UL/FM listed. (UL 9th Edition Approved) (The panel shall be complete with suitable power supply to operate the as per detectors and devices in case of Emergency but not less than 10 Amp.)
1
-
-
Supplying, installing, testing and commissioning Automatic Floating Sensitivity type Analog addressable Accilimate Multisensor (Photo thermal) smoke cum heat detector with mounting based LED, address switch to programme the detectors complete as required.( It shall be UL/FM listed.)
30
-
-
Providing, installing, testing and commissioning of Repeater Panel for Fire Alarm System with piezo sounder, LCD alpha numeric character display with accept/reset buttons for alarm address of any sensor/field device. The Repeater Panel shall only provide field device address. Analogue output is not required. The Panel shall be connected to the Fire Alarm Panel.
1
-
-
Supply, installation, testing and commissioning of Addressable type fault isolator for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement (base model).
4
-
-
Supply, installation, testing and commissioning of Addressable control relay modules for AHU & stairs Pressurization Fan.Hooter and manual call point etc.
4
-
-
Supply, installation, testing and commissioning of Hooter/Strobe Lights with 110 cd. The strobes shall be synchronized for better evacuation.
4
-
-
Supply and laying of 2 Core, 1.5 Sq. mm twisted pair copper conductor cable, low smoke zero halogen, high performance silicon rubber insulated, overall shielded, sheathed fire survival (HPSR) armored cable on surface/ recess/ existing couduit/ existing cable tray complete in all respect as per BS 6387 CWZ, EN50200, LPCB approved for the same size.
1930
-
-
Supplying, installing, testing and commissioning of Analog Addressable air duct smoke detector with an efficient housing design and sampling tubes mounting based LED, Address Switch to programme the detectors, complete as required. (FOR AHU's).(It shall be UL/FM Listed)..
4
-
-
Supplying, installing, testing and commissioning of Response Indicator.
20
-
-
Supplying, installing, testing and commissioning Fire panel supervised 70db-84db Wall Mounted multi tap 12 Watt Speaker as specified & same make as of panel.
4
-
-
Supplying, installing, testing and commissioning 2 way communication Fire Fighter's Handset
2
-
-
Supplying, installing, testing and commissioning 2 way communication Fire Fighter's Telephone Jack as per specifications complete as required.
2
-
-
Supplying, installing, testing and commissioning Addressable Manual Pull Station complete as required.( It shall be UL/FM listed.)
4
-
-
NETWORKING AND VOICE SYSTEM: DATA PASSIVE COMPONENT
-
-
-
Supply, installation, testing and commissioning of 4 pair Category 6 UTP LSZH cable in existing conduit/ surface/recess/cabletray. Consisting of 24 AWG solid copper conductors complete with flexible jacket and ripcord for easy stripability etc complete as required as per specifications.
1230
-
-
Supply, installation, testing and commissioning of category 6(E) flush mounted information outlets wired according to T568B standard with a faceplate.
2
-
-
Supply, Installation & Testing of Cat.6 E UTP 24-port Non-Shutter Patch Panel, Un-loaded with Layer II Managed Gigabit Ethernet switch: 8 port RJ45 10/100/1000 T (POE). INCLUDING SINGLE MODE SFP with transreceiver all network accessories like patch code , connectors etc for successful operations etc complete as required .
1
-
-
RJ 45 Connectors UTP with all accessories
2
-
-
Supply, Installation & Testing of 1U Cable Management Panel.
1
-
-
Supply, Installation & Testing of Cat6 Patch Cord UTP 2M CM, Blue for Field Side.
5
-
-
Supply, Installation & Testing of Cat6 Patch Cord UTP 4ft CM, Blue for Rack Side.
5
-
-
Supply, Installation & Testing of Cat6 Patch Cord UTP 7 ft , Blue for User Side.
2
-
-
Wi-Fi Access Point for Guest Floor and Admin
4
-
-
WAP Controller for above Aps
1
-
-
12 Port Ethernet Edge Switch 10/100 for Wi-Fi
1
-
-
Core Switch 10/100/1000 cum router for above Wireless Network
1
-
-
CLOSED RACK 12U: Rack 19'' 12 U 600W/800D( with front VNTD Glass Lockable Doors,Back Fully perforated Door, lockable and removable side panels, with 10 pin Vertical PDU
1
-
-
Castor ,Tyreman,FT brake & Back STD
1
-
-
Vertical Cable Manager
2
-
-
Fan HSG,90 CFM,4 FAN
1
-
-
Fan 230 VAC,90 CFM
1
-
-
NETWORKING AND VOICE SYSTEM:VOICE PASSIVE COMPONENT
-
-
-
VOICE PASSIVE COMPONENT: Supply ,Installation &Testing of Cat.5 8-port Non-Shutter Patch Panel, Un-loaded Field.
1
-
-
Supply ,Installation &Testing of 1U Cable Management Panel.
1
-
-
Supply ,Installation &Testing of Cat.5, 8-port Non-Shutter Patch Panel, un-loaded Resource.
1
-
-
Supply ,Installation &Testing of Cat5 Patch Cord UTP 7 ft , Yellow for Rack Side.
10
-
-
Supply ,Installation &Testing of 20 Pair MDF Module Frame with lockable facility.
1
-
-
Supply ,Installation &Testing of 10 Pair disconnection Module for 100 pair MDF.
1
-
-
10 pair Telephone Riser Cable .
1
-
-
Supply & drawing of Cat.5 A 4Pair UTP Cable 305m Blue, CM for Back Bone.
2
-
-
Supply & Fixing of SOCKET RJ45 CAT5 Non-SHUTTERED KSTONE Grey for Back-Bone.
5
-
-
supply installation and testing of Rack 19'' 12 U 500W/300D lockable and removable side panels, with PDU.
1
-
-
CCTV SYSTEM:
-
-
-
Supply Installation testing commissioing of 540 TVL Day/Night Dome cameras with sensitivity of minimum 1.6 lux (Color) and 0.01 lux(B&W). The cameras shall use the1/3-inch interline transfer CCD sensor and shall have a 2.8 to 12mm varifocal lens. The Cameras shall be EN/UL Listed asper the specifications -(in P & G area , Lift Lobby and admin office)
5
-
-
Supply Installation testing commissioing of 540 TVL CCD Camera with minimum lux level of 0.01 lux. The cameras shall use 2.9 to 8mm varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000 sec. The Cameras shall be EN/UL Listed asper the specification-( pasage)
2
-
-
Supply Installation testing commissioing of 540 TVL CCD True Day/Night Camera with minimum lux level of 0.001 lux. The cameras shall use 2.7-13.5 mm varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000 sec. The Cameras shall be EN/UL Listed asper the specification.(External Perhaperi)
2
-
-
Outdoor Aluminium housing Small, Sleek, Contemporary Design High Reliability Die-Cast Construction Tamper-Proof Hardware, with Heater/Blower, Sun Shroud, Meets IP66 and NEMA Standards. UL,CE, FCC certified with Inbuilt power adapter for cameras asper the specification.
1
-
-
Supply, installation, testing & commissioning of UL listed DVR 16ch with 6Slots for HDD and DVD writer,Compression H.264,Outputs CVBS (BNC),HDMI, VGA ,4 audio input,Control RS 485 and RS 232,16 Alarm Input ,Video Output Loop Through,ESata connector for backup device,One front and one rear USB connector for mouse or USB memory device,Support Joystick Mode Manual, motion detection, scheduled, alarm,Alarm handling Motion detection Supports NAS
1
-
-
Supply, installation, testing and commissioning RG11 Cable in existing Conduit/raceway/cable tray with clamp/sadles/tie as per technical specification etc complete ar required .
4700
-
-
Supplying and fixing of 25 mm steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
300
-
-
SITC of 42" LED 1920 x 1080 HD Display System
1
-
-
UN- INTERRUPTED POWER SUPPLY
-
-
-
Supply, installation of 1 KVA UPS with 15 Minutes battery Backup at load using Sealed Lead Acid Maintenance Free batteries. Battery design life is 5-6 yrs.including with MS Racks for housing batteries, Battery Disconnector, battery to battery inter-links, Battery to UPS cable for a distance of 10 meters per UPS complet as required.
1
-
-
TPN ISOLATOR FOR GOODS LIFT
-
-
-
Supply, installation, testing and commissioning of Recessed 63A ,4Pole TPN isolator in powder coated, 1.6mm thick MS enclosure having facility for incoming and outgoing cables, set of ON/OFF/Trip indicating lamps shall be protected by control MCBs, complete with all materials and as per site requirement.
2
-
-
FIRE FIGHTING WORKS
-
-
-
Providing and fixing FIRE PUMPS, EQUIPMENT, PIPING, VALVES & ACCESSORIES : Electric Motor Driven Hydrant Pump (Location - Fire/Plumbing Plant Room) : Supplying, installing, testing and commissioning of Fire authority approved, factory assembled and tested Electrical driven fire pump suitable for automatic/ manual operation consisting of the following: Horizontal end suction, high pressure single/ multistage centrifugal type fire pump capable of delivering 1620 LPM (27 LPS) against a total head of 60 M while running at 2900 RPM complete with mechanical seal, proper connection to suction and delivery line, and including 100 mm bypass arrangement for testing of pumps, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation; Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head; Squirrel cage, induction motor, TEFC type, efficiency class. eff-1, suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with a synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F' insulation. The motor shall conform to IS 12615 : 2004 and IS 325 : 1978 (up to date) with flexible coupling and coupling guard; Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (6 Nos., heavy duty); Flexible Coupling and coupling guard for direct coupling of pump and motor; Drain Pipe with Valve (50 mm dia) (For independent testing respective pump); Main Fire Pump; Discharge : 1620 LPM (27 LPS) ; Pumping Head : 60 M; Motor KW (Approx) : 35 KW/As per manufacturer recommendation in all respect as per direction of engineer in chanrge nclude interconnection fire survival cables and foundation bolts, grouting of Foundation bolts and other accessories required including interconnection fire survival cables and foundation bolts, grouting of Foundation bolts and other accessories required.complete in all respect as per direction of Engineer in charge.
1
-
-
Providing and fixing Diesel Engine Driven Fire Pump [Stand by pump] (Location -Fire/Plumbing Plant Room) : Supplying, installing, testing & commissioning of fire authority approved, factory assembled and tested Diesel Engine driven fire pump suitable for automatic/manual operations consisting of the following : Horizontal end suction, high pressure single centrifugal type fire pump capable of delivering 1620 LPM (27 LPS) against a total head of 60 M while running at 1500 RPM complete with mechanical seal, proper connection to suction and delivery line, and including 100 mm bypass arrangement for testing of pumps, having a name plate indicating suction a delivery head, discharge, stages, RPM and direction of rotation; Heat Exchanger cooled diesel engine of required BHP or as per manufacturer recommendation at 1500 RPM for the above pump complete with standard accessories & suitable cooling system as described in specifications; Common base plate for mounting pump & engine of required strength manufactured out of M.S. channels as per manufacture's recommendation with heavy duty Anti Vibration pads. (Cushy foot) (8 nos., heavy duty); Flexible Coupling & coupling guard for direct coupling of engine & pump; 1 No. minimum 8 hours capacity day oil storage tank fabricated from 3 mm thick M.S. plates. Tank shall be provided with inlet, outlet, overflow, air vent, drain connections, filling connection & magnetic level indicator. Tank shall be mounted on a suitable steel structure (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside & two or more coats of synthetic enamel paint outside over two coats of red oxide primer. Diesel storage tank shall be double skin; 12 volts 180 AH lead acid battery (12 volts - 1 Nos) with boost/Trickle charger for starting the engine automatically complete as required; Diesel Engine driven pump of: Discharge : 1620 LPM (27 LPS) ; Pumping Head : 60 M; Engine HP (Approx) : 40 HP/ As per manufacturer recommendation; Jockey Pump :- including inter connecting fire survival cables & foundation bolts, grouting of Foundation bolts and other accessories required. (Common for Hydrant & Sprinkler System) complete in all respect as per direction of Engineer in charge.
1
-
-
Providing and fixing Electrical Motor Driven Jockey Pump (Location - Fire/Plumbing Plant Room) : Supplying, installing, testing & commissioning of fire authority approved, factory assembled and tested electrically driven Jockey pump suitable for automatic/manual operation consisting of the following: Vertical multistage jockey pump having SS body S.S. impeller, stainless steel shaft with mechanical seal capable of delivering 180 LPM against total head of 60 M while running at 2900 RPM complete. The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side including bypass arrangement (with 50 mm GM stop valve and up to 5 meter G.I. class 'C' pipe) for testing of working of the pumping set as required. The pump should meet the recommended requirement and must be approved by the local fire authority; Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with asynchronous speed of 2900 RPM T.E.F.C type having effliciency class eff-1 as per IS 12615 : 2004, connected to pump with flexible coupling and coupling guard ; Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot); Drain pipe with valve (25 mm dia); Discharge : 180 LPM (3 LPS); Pumping Head : 60 M; App. HP/KW : 5.0 KW/ as per manufacturer recommendation including inter connecting fire survival cables, grouting of Foundation bolts and other accessories required complete in all respect as per direction of Engineer in charge.
1
-
-
Providing, fixing, testing and commissioning of precharged air vessel (size 450 mm dia & 1500 mm height) fabricated shell from 8 mm thick & dished end 10 mm thick M.S. Plate for pressurization of hydrant/ sprinkler system complete with adequate pressure switches (as per design / requirement) with valve to operate as per operating sequences including 25 mm dia drain valve, air release valve with ball cock on top, 80 mm dia flanged inlet with isolating valve duly painted from inside and out side complete as required as per direction of Engineer in charge.
1
-
-
Supply, installation, testing and commissioning of M.S Class 'C' (Heavy Duty) pipes conforming IS:1239/3589, with all necessary fittings like tees, coupling, mechanical tees, strap tees, elbows flanges, reducers, gaskets, nuts, and bolts etc. with welding joints as required including fixing the pipe with necessary structural supports including painting of two coats of synthetic enamel paint over two coats of red oxide primer including all civil breakage and making good the coats of red oxide primer including all civil breakages and making good the same. (Location: Fire Plant Room) in all respect as per direction of engineer in charge
-
-
-
150 mm dia G.I. Pipe
35
-
-
200 mm dia (6 mm thick) with necessary supports etc. as required.
20
-
-
Providing, fixing, testing & commissioning of flanged end Y-strainer made from C.I body having SS filter mesh- 200 mm dia
1
-
-
Providing, fixing, testing & commissioning of C.I Butterfly valve conforming to IS : 13095 with flanges fittings, nuts, bolts and washers complete for following sizes :- [PN 10 rating (10 kg/cm2 pressure rating)].as per direction of Engineer in charge.
-
-
-
200 mm dia
2
-
-
150 mm dia
6
-
-
100 mm dia
1
-
-
80 mm dia
1
-
-
50 mm dia
2
-
-
Providing, fixing, testing & commissioning of C.I dual plate non-return valve [PN 10Rating (10 kg/cm2 pressure rating)] complete with 2 nos. matching flanges, rubber insertion, with nuts, bolts and washers etc of following sizes in all respect as per direction of engineer in charge .
-
-
-
150 mm dia
2
-
-
80 mm dia
1
-
-
50 mm dia
1
-
-
Providing & fixing dial type (100 mm dia) SS body pressure gauge with isolation ball valve suitable for working pressure of 150 PSI cost shall be of inclusive of providing any short pieces, nipples, elbows etc as required. having calibration of 0-10 Kg/cm2) in all respect as per direction of engineer in charge .
6
-
-
Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45oC temperature, working pressure 10 Kg/cm2 and test pressure 15 Kg/cm2 for :-in all respect as per direction of engineer in charge .
-
-
-
150 mm dia
4
-
-
100 mm dia
1
-
-
80 mm dia
1
-
-
Providing, fixing, testing & commissioning of M.S. class 'C' diesel pump exhaust pipe (80mm) including all fittings like bends, tee, clamps/structural steel support of suitable dia for the engine . The insulation of the exhaust pipe shall be carried out with rock wool with specific gravity of 100kg/cm2 and cladded with 22 gauge aluminium sheet in all respect as per direction of engineer in charge .
20
-
-
ELECTRICAL WORKS (Fire Fighting)
-
-
-
Providing and fixing Fire Fightimg Control Panel: SITC of following fire fighting panel suitable for 415 V, +/- 10% Volts, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal enclosed dust and vermin proof conforming to IP-52, compartmentalized design, fabricated out of 14 SWG sheet steel, painting, earthing numbering, danger plate as per specifications and drawings , flush front with Aluminium busbars, separate earth bus bars of 40 x 5 mm (Aluminium) to be provided throughout the length of the panel. The incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accommodated in a modular multitier arrangement. The painting shall be done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided all round the panel and in the back for each cable bending and termination. The panel shall be fabricated by TAC/Fire authority approved vendor. The outgoing feeders inside the panel shall be connected through solid bus bars. Flexible cable links are not acceptable; Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded. The panels shall be suitable for cable entry from top. The panels shall be fabricated after the approval of fabrication drawings; All wires shall be PVC insulated and cables used will be XLPE insulated. 2 Nos. earthing terminals shall be provided for 3 phase, 415 V, 50 HZ supply system. M Lifting hooks shall also be provided in case of large panels. Cadmium plated hardware shall be used in fabrication of Panels; Fire Fighting Panel: Incoming : One (1) No. 200A TPN MCCB (25 KA); One (1) No. Multifunction Meter for measurement of voltages, current and frequency (ELF-3254 of conzerv or approved Equivalent) with suitable ratio CTs and back up SP MCB/Fuses; 1 Set (3 Nos.) of phase indication lamps LED Type with backup SP MCB; Three (3) Nos. of indication lamps for ON/OFF & Trip with backup SP MCB- Busbar :- 250A, 25KA,TPN Aluminium busbar insulated with PVC Colour coded heat shrinkable sleeve; Separate earth busbar of 50X6mm Aluminium shall be provided. Outgoing: One (1) Nos. 160 A TP+N MCCB (35kA); One (1) Nos. 63A 4P MPCB; One (1) No. DOL Starters complete with over load relay with separate single phasing protection feature, ON/OFF & TRIP, indication lamp, AC3 duty contactors, Auto/Manual selector switch and sufficient nos. of potential free spare contacts, etc. suitable for 40 HP motor as per approved SLD; One (1) No. DOL Starters complete with over load relay with separate single phasing protection feature, ON/OFF & TRIP, indication lamp, AC3 duty contactors, Auto/Manual selector switch and sufficient nos. of potential free spare contacts, etc. suitable for 5.0 HP motor as per approved SLD; Wiring from pressure switch to starter - Lot.; Set of control system to make the system automatic as per functional requirements which is activated with pressure switches as per specifications and complete with all accessories as required.; Interlocking shall be provided so that only one pump starts at a time; The diesel engine driven fire pump shall start automatically in the event of pressure drop beyond preset limit on mains failure or failure of electrical driven pumps to start. AMF logic for starting the diesel engine fire pump with trickle / boost battery charger, DC ammeter Voltmeter, Hooter indication etc to meet the system requirement; One (1) no. pressure switch; Wiring from pressure switch to Diesel engine control panel. Following provisions to be made in the fire panel: Audio visual alarm & indications having disconnect/reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset PBs. The indication shall come on when electrical driven pump set fails to start on pressure drop or when there is power failure during pressure drop; Facility for mode selection ie auto or manual test & local/remote; Protection features & control cabling; Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working chiller and A/c panel is disconnected; Remote indication of ON/OFF/ TRIP shall be provided through potential free contact; Provision of remote starting/ stopping (manual) of the engine shall be made; Sufficient No. of potential free contacts and terminals shall be provided for connecting it to BMS); Note: Contractor shall include in his rate for providing level controller, pressure switches, wiring, cabling from level controller/pressure switch to panel etc. complete as required to operate the system automatic/manual. Pump shall be protected against running dry. The Control panel should meet the requirement of Local Fire Authority norms and shall be manufactured as per approved technical data sheet of pumps.in all respect as per direction of engineer in charge .
-
-
-
Fire Fighing Panel described as above and as per SLD.
1
-
-
Supply, installation, testing & commissioning of following sizes of 1100 V grade XLPE insulated PVC inner & outer sheathed, Aluminium, fire survival armoured cables, as per site conditionsand complete in all respect as per direction of Engineer -in -Charge.
-
-
-
3.5C x 120 Sq.mm
40
-
-
4C x 50 Sqmm
1
-
-
3C x 16 Sqmm
40
-
-
3C x 10 Sqmm
1
-
-
4C x 16 Sqmm
1
-
-
Copper Conductor Armoured fire survival Control Cables :
-
-
-
4C x 2.5 Sq.mm
50
-
-
5C x 2.5 Sq.mm
1
-
-
Cable Termination: Supply & making end termination with brass double compression glands for the following XLPE insulated, PVC sheathed & armoured 1100 V grade Aluminium cable including cost of crimping lugs/ferrules, compression glands, solder, cable sockets, insulation tape etc complete as required in all respect as per direction of engineer in charge
-
-
-
3.5C x 120 Sqmm
4
-
-
4C x 50 Sqmm
1
-
-
3C x 16 Sqmm
2
-
-
3C x 10 Sqmm
1
-
-
4C x 16 Sqmm
1
-
-
Cable Termination : Suitable for Copper Conductor Armoured Control Cables :
-
-
-
4C x 2.5 Sq.mm
8
-
-
5C x 2.5 Sq.mm
1
-
-
Supply and installation of GI ladder type/perforated type cable trays of the following sizes fabricated out of perforated hot dip galvanised MS sheets of minimum 2mm thick with 75mm flange to be installed horizontally or vertically: Ladder Type Cable Tray in all respect as per direction of engineer in charge
-
-
-
300mm wide
35
-
-
150mm wide
25
-
-
Perforated Type Cable Tray
-
-
-
300mm wide x 50mm x 2mm
10
-
-
150mm wide x 40mm x 2mm
10
-
-
Earthing: Supply, Installation, Testing & Commissioning of the following size of GI strip/wire clamped to wall, cable trays complete as required including interconnection between lengths at joints, all fixing accessories saddles, calmps etc. and other fixing hardware in all respect as per direction of engineer in charge
-
-
-
50 x 6 mm strip
1
-
-
25 x 6 mm strip
25
-
-
25 x 3 mm strip
1
-
-
8 SWG GI wire
20
-
-
Providing FIRE HYDRANT SYSTEM (INTERNAL) : SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF: 'C' class heavy duty M.S. pipe conforming to IS 1239 including welding/threading, jointing with all fittings like elbows, tees,bends,flanges, tappers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamps & structural steel support including cutting holes and chases in brick work and RCC work and painting with two coats of red oxide primer and two coats of synthetic enamel paint of required shade complete as required. Notes: Pipes upto and 50 mm dia shall be threaded joints, above 50 mm shall be done with Welded joints. Notes: Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the wall/ floors/sealing, the sleeves with glass wool in between minimum 2 Hrs rated firestop sealant compound at either end, age tested to dafStb guidelines complete as per project manager's requirement or manufacturers reccomendation in all respect as per direction of engineer in charge
-
-
-
80 mm dia
10
-
-
100 mm dia
18
-
-
150 mm dia
45
-
-
Providing, fixing, testing & commissioning of ISI marked S.S. metal single headed fire hydrant landing valve with Inbuilt pressure reducing valve with flanged inlet, SS spindle controlled 63 mm dia female instantaneous outlet type. CI wheel, SS coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS:5290. (type A) Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with gun metal ball valve complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing, fixing testing and commissioning of UL listed 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type "A" with Stainless steel male & female instantaneous type coupling (IS 903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire (For internal).complete in all respect as per direction of Engineer -in -Charge.
8
-
-
Providing, fixing testing and commissioning of Stainless steel branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903) complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing and fixing Standard Fireman's Axe with heavy insulated handle.complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing, fixing testing and commissioning of Wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30.0 Mtr. length x 20 mm dia thermoplast hose reel tubing as per IS:12585 with Stainless steel (SS) shut off nozzle having 6.5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe (heavy class) connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall by means of 120 mm x 100 mm long fasteners, bolts and nuts including painting. (For internal hydrant system). complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing & fixing fire authority approved M.S. hose door (size 900 (L) x 2100 (H)) made out of 16 SWG powder coated M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red as per IS:5, shade no. 536. (Location : For Internal Hydrant) complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing, fixing, testing & commissioning of C.I Butterfly valve conforming to IS : 13095 with flanges/grooved fittings, nuts, bolts and washers complete for following sizes :- [PN 10 rating (10 kg/cm2 pressure rating)].complete in all respect as per direction of Engineer -in -Charge.
-
-
-
150 mm dia
1
-
-
100 mm dia
2
-
-
80 mm dia
4
-
-
Providing & fixing cast iron air release valve of 25 mm dia including 25 mm dia Ball valve with fittings etc. as per the requirement.complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing & fixing Bourden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (For each internal Fire hose cabinet) of dial diameter : 150 mm & Caliberation : 0-15 Kg/cm2 complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing & fixing Air cushion tank (air-vessel) 250 mm dia. x 1.0 m high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required incl. fixing brackets complete in all respect as per direction of Engineer -in -Charge.
1
-
-
FIRE HYDRANT SYSTEM (EXTERNAL)
-
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including grooved/threaded jointing with all fittings like elbows, tees,bends,flanges, tappers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamps & structural steel support including cutting holes and chases in brick work and RCC work and painting with two coats of red oxide primer and two coats of synthetic enamel paint of required shade complete as required. Notes: Pipes upto and 50 mm dia shall be threaded joints, above 50 mm shall be done with welded joints. Steel structural supports are included in this items. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the wall/ floors/sealing, the sleeves with glass wool in between minimum 2 Hrs rated firestop sealant compound at either end, age tested to dafStb guidelines complete as per project manager's requirement or manufacturers reccomendation in all respect as per direction of engineer in charge
-
-
-
80 mm dia
15
-
-
100 mm dia
20
-
-
150 mm dia
200
-
-
Providing and applying one coat of 4 mm thick anti rust pipe protection including approved primer as per manufactures specifications and lap of 25 mm to make an impermeable layer on M.S. Pipes in trenches or structural /masonary members complete including surface preparation.complete in all respect as per direction of Engineer -in -Charge.
-
-
-
80 mm dia
10
-
-
100 mm dia
25
-
-
150 mm dia
55
-
-
Providing, fixing, testing & commissioning of ISI marked S.S. metal single headed fire hydrant landing valve with Inbuilt pressure reducing valve with flanged inlet, SS spindle controlled 63 mm dia female instantaneous outlet type. CI wheel, SS coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS:5290. (type A) Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with gun metal ball valve complete as required.complete in all respect as per direction of Engineer -in -Charge.
5
-
-
Providing, fixing testing and commissioning of UL listed 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type "A" with Stainless steel male & female instantaneous type coupling (IS 903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.complete in all respect as per direction of Engineer -in -Charge.
10
-
-
Providing, fixing testing and commissioning of Standard Stainless steel branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903) complete in all respect as per direction of Engineer -in -Charge.
5
-
-
Providing and plaacing of Stainless steel Standard Fireman's Axe with heavy insulated handle. Tested to 11 KV ISI marked.complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing, fixing testing and commissioning of Weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe & nozzle spanner. Cost shall inclusive of break glass box containing key for the cabinet along with axe hammer.complete in all respect as per direction of Engineer -in -Charge.
5
-
-
Providing, fixing, testing & commissioning of C.I Butterfly valve conforming to IS : 13095 with flanges/grooved fittings, nuts, bolts and washers complete for following sizes :- [PN 10 rating (10 kg/cm2 pressure rating)].complete in all respect as per direction of Engineer -in -Charge.
-
-
-
150 mm dia
3
-
-
100 mm dia
1
-
-
80 mm dia
6
-
-
Supply, installation, testing and commissioning of S.S four way fire brigade inlet to external hydrant ring /internal hydrant & sprinkler riser/Header with 63 mm dia instantaneous type inlet and 150 mm dia flanges outlet conforming to IS:904 with blank cap and chain including 150 mm dia C.I butterfly valve (PN 10 rating) and wafter type non-return valve complete with nuts, bolts, flanges and complete in all respect. Cost shall include a wall mounted box of M.S. construction (16 SWG) with glass door (4.0 mm thick) to house the above mentioned component complete in all respect as per direction of Engineer -in -Charge.
1
-
-
S.S Metal Two way fire brigade suction hose coupling of (gunmetal draw out connection) with 100 mm dia M.S. 'C’ Class suction pipe with 100 mm dia C.I. foot valve (2 No.). (Pipe max. 10 m long). Cost shall include a wall mounted box of M.S. construction (16 SWG) with glass door (4.0 mm thick) to house the above mentioned component to be connected to static water tank complete in all respect as per direction of Engineer -in -Charge.
1
-
-
S.S Metal fire brigade suction hose coupling of (gunmetal draw in connection) with 100 mm dia M.S. 'C’ Class pipe (Pipe max. 10 m long). Cost shall include a wall mounted box of M.S. construction (16 SWG) with glass door (4.0 mm thick) to house the above mentioned component to be connected at main fire header pipe in fire plant room and external ring main.) complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing and laying light duty non pressure NP-3 Class RCC pipe S/S jointed with stiff mixture in the proportion 1:2, 300 mm dia R.C.C. Hume pipe for underground hydrant pipe at road crossings including collar pieces and filling inside of pipe with sand complete as required including necessary excavations and back filling and bed concrete. (For road crossing) complete in all respect as per direction of Engineer -in -Charge.
30
-
-
Bourden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (For each External Fire hose cabinet + tarrace ); Dial Diameter : 150 mm; Caliberation : 0-25 Kg/cm2 complete in all respect as per direction of Engineer -in -Charge.
6
-
-
Constructing brick masonry chamber with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for Butterfly valve/Sluice valve, with FRP medium duty manhole cover fixed in concrete slab 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size), necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size) and 12 mm thick inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement complete as per standard design - 1200 x 1200 x 1500 mm internal dimensions complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls (For structural work other than pipe supports).
900
-
-
SPRINKLER SYSTEM
-
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty M.S. pipe conforming to IS 1239 including grooved/threading, jointing with all fittings like elbows, tees,bends,flanges, tappers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamps & structural steel support including cutting holes and chases in brick work and RCC work and painting with two coats of red oxide primer and two coats of synthetic enamel paint of required shade complete as required. Notes: For M.S. pipes upto and 50 dia shall be used forged fittings with threaded joint, above 50 mm shall be done with welded joint. Steel structural supports are included in this items. Pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the wall/ floors/sealing, the sleeves with glass wool in between and minimum 2 Hrs rated firestop sealant compound at either end, age tested to dafStb guidelines complete as per project manager's requirement or manufacturers reccomendation in all respect as per direction of engineer in charge
-
-
-
150 mm dia
1
-
-
100 mm dia
5
-
-
80mm dia
5
-
-
65mm dia
110
-
-
50mmdia
70
-
-
40mmdia
20
-
-
32mm dia
25
-
-
25mm dia
130
-
-
Providing, fixing, testing and commissioning of 100 mm dia Cast Iron/Ductile installation control valve assembly (test pressure should not be less than 10.0 Kg/Sq.cm) with flanges, nut, bolts & gasket complete with pad locking arrangement, vertical wet alarm valve with hydraulic alarm motor & gong, 2 nos. pressure gauges as per manufacturer recommendation with ball valves, 15 mm dia test valves, 50 mm dia drain valve with all necessary accessoriescomplete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing, fixing, testing and commissioning of 150 mm dia Bourden type, Stainless Steel dial type pressure gauges for sprinkler system including ball valve and pipe having caliberation of 0-10Kg/cm2complete in all respect as per direction of Engineer -in -Charge.
2
-
-
Providing, fixing, testing and commissioning of Quick Response 15 mm dia quartzoid bulb type Stainless steel sprinkler head All sprinklers shall be chrome finish / powder coated except for conceled. The conceled sprinkler shall be brass finish. The cover plate of concealed sprinkler shall be factory painted at manufacturers work and the shade be conformed prior to application on the cover plate. The sprinkler shall be either pendent or upright type/side wall and shall not be universal style. Contractor shall ensure provision of sprinkler guard at no additional cost. All pendent sprinkler will be provided with rossette plate complete in all respect as per direction of Engineer -in -Charge.
-
-
-
Concealed Sprinkler 680C (K=80)
1
-
-
Upright / Pendent Sprinkler 680C (K=80)
40
-
-
Side wall Sprinkler 680C (K=80)
1
-
-
Supply, installation, testing & commissioning of UL listed/FM approved Sprinkler SS braided Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14kgf/cm2 and temperature rating of 225oF. The length of Flexible Sprinklers Pipe shall be:complete in all respect as per direction of Engineer -in -Charge.
-
-
-
1000mm
5
-
-
1200mm
5
-
-
1500mm
5
-
-
Providing, fixing, testing & commissioning of C.I Butterfly valve conforming to IS : 13095 with flanges/grooved fittings, nuts, bolts and washers complete for following sizes :- [PN 10 rating kg/cm2 pressure rating)] of 80 mm dia complete in all respect as per direction of Engineer -in -Charge.
2
-
-
Providing & fixing cast iron single acting air valve with screwed inlet 25 mm dia including Ball valve and all fitting & accessories complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing & fixing water flow detectors / switches (Vane type) for sprinkler system, shall have sensitivity in the range of 4 to 10 US gallon per minute and static pressure rating of 450 PSI including accessories, junction box, suitable for indoor / outdoor mounting. The detector shall respond to water flow in the specified direction after a preset time delay that is field adjustable, complete as required suitable for fixing on fire pipe including connection for wiring. - on 65 to 100 mm dia line complete in all respect as per direction of Engineer -in -Charge.
2
-
-
Providing ,fixing , inspecting ,testing of 50 mm drain Size & 15 mm (5.6 K) Testing orifice drain assembly for installation on sprinkler system, in brass body consisting of steel singler lever ball valve for multiple test and drain functions, inculding inlet connection of specified size , sight glass , connections to the main header and line drain complete as per requirement . Product shall suitable for min.10 Kg/cm2 working pressure complete in all respect as per direction of Engineer -in -Charge.
2
-
-
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls (Structural other than pipe support) complete in all respect as per direction of Engineer -in -Charge.
200
-
-
HAND APPLIANCES
-
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge complete in all respect as per direction of Engineer -in -Charge.
-
-
-
Capacity 4.5kg. I.S.I. Marked.
4
-
-
Capacity 9.0 Kg ISI Marked.
5
-
-
Providing and fixing ABC stored pressure dry chemical powder (monoammonium phosphate) Fire Extinguisher IS : 13849 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzel, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases - Capacity 6 kg complete in all respect as per direction of Engineer -in -Charge.
7
-
-
Providing and fixing mechanical foam type (ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 finished externally with red enamel paint and fixed to wall with brackets complete with internal charger.50 litres capacity (trolly mounted) (IS : 13386) complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.: Capacity 22.5 kg.complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets) complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Supply, installation, testing and commissioning of fire exit signage of photo luminescent on aluminium sheet of 1.0 mm (± 10%) containing lumigen-III as base chemical, covered with U/V stabilized coating size 450 x 200 complete in all respect as per direction of Engineer -in -Charge.
-
-
-
Escape signs
323
-
-
Fire signs
323
-
-
General signs
323
-
-
Supply and installation of 48 mm thick steel door shutter of 60 min fire rated confirming to BS-476, Part-22 and IS:3614part-II; abricated with 2 Nos. of 1mm thick galvanisedsteel sheet Size 1200 X 2380 MM S/L Sq. mtrs 8.568 with 202 grade SS ball bearing hinges (100x75x3 mm ) Assa Abloy, Fire rated door closer (standard arm) Assa Abloy, 60 min fire rated cleared wired glass (150X750X/7.3 MM), 202 grade SS back to backdoor handle (250 mm) Assa Abloy, Dead lock with 70 mm cylender Assa abloy complete in all respect to the satisfaction of Engiineer In-charge.sandwitching honeycombmaterial in between. Door frame are manufactured with 1.25 mm thick galvanised steel sheet pressed to formdouble rivet profileof size 143x60 mm. The frame and shutterare finished with powder coated complete in all respect as per direction of Engineer -in -Charge.
5.5
-
-
SANITARY FIXTURES
-
-
-
Providing , fixing, testing and commissioning of of white vitreous china European type water closet floor/ wall mounted with concealed P trap and low volume concealed type flushing cistern with internal fittings made of high grade plastic and non-corrosive metal, matching polypropelene seat and cover, CP brass hinges rubber buffers, with accessories, CI/MS concealed brackets painted with two or three coats of enamel paint of approved shade over a coat of primer. CP brass screws and wooden cleats, including cutting and making good the wall and floors wherever required in all respect as per direction of engineer in charge
4
-
-
Providing , fixing, testing and commissioning of C.P. hand spray (health faucet) with push button control and flexible hose connection with C.P. holder for hand spray complete in all respects. in all respect as per direction of engineer in charge
4
-
-
Providing , fixing, testing and commissioning of CP brass Toilet Paper Holder fixed to PVC raw plug with SS screws, making holes in walls & making good. in all respect as per direction of engineer in charge
4
-
-
Providing , fixing, testing and commissioning of Under/Over counter wash basin with C.I. brackets, 32 mm C.P brass/ PP waste fitting and C.P brass/ PP waterless Bottle trap - of standard pattern, including supply of CI Bracket fitting, flexible pipe with Supply of painting of fitting, cutting and making good the walls wherever required in all respect as per direction of engineer in charge
10
-
-
Providing , fixing, testing and commissioning of single lever pillar tap for wash basin complete in all respect as per direction of Engineer -in -Charge..
10
-
-
Providing , fixing, testing and commissioning of senor pillar tap for wash basin complete in all respect as per direction of Engineer -in -Charge.
1
-
-
Providing , fixing, testing and commissioning of white vitreous china Urinal basin of standard size C.P brass flush pipe, spreaders with unions and clamps (all in C.P brass) with waste fitting & waterless PP bottle trap (if required), with outlet grating, Infra-Red based electronic flushing system operated on 6V DC (4AA) battery for urinals comprising of solenoid valve, concealed built in strainer & flow mechanism piping, flush mounted sensors with all accessories & fittings complete in all respect in fully operational condition and other couplings in C.P brass including painting of fitting and cutting and making good the walls and floors wherever required. in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of of glass urinal partition as per interior drawing including providing & fixing concealed CI bracket, cutting and making good, complete in all respect in all respect as per direction of engineer in charge.
1
-
-
Providing , fixing, testing and commissioning of Stainless steel AISI 304 (18/8) Pantry sink with CI/MS (Painted) bracket and stainless steel plug 40 mm including drain connection with PP 40/50 mm Dia pipe, painting of fittings and brackets, cutting and making good the walls wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of of 15 mm CP brass wall mounting single hole mixing fitting for sink with swinging and swivel spout complete including cutting and making good the walls wherever required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of C.P brass Angular stop cock with wall flange (Angle Valve) for basin mixer,health faucet, Shower & WC etc. of approved quality complete in all respect in all respect as per direction of engineer in charge
20
-
-
Providing , fixing, testing and commissioning of SS finished Robe hook fixed to wall / door with wooden cleats and SS screws including cutting and making good the wall wherever required complete in all respect as per direction of Engineer -in -Charge.
4
-
-
Providing , fixing, testing and commissioning of of SS liquid soap Dispenser with Metallic Bottle complete including cutting and making good the wall wherever required in all respect as per direction of engineer in charge
4
-
-
Providing , fixing, testing and commissioning of fully automatic "No tough" recessed SS brushed finish hand drier with paper dispencer and waste bin suitable to operate on 230 volts, single phase, 50 Hz AC power supply complete with brackets or required fixing arrangeements for fixing including cutting and making good the walls wherever required and connection complete in all respect as per direction of Engineer -in -Charge.
2
-
-
Providing , fixing, testing and commissioning of adjustable support arm for physically challanged persons complete accessories complete as required including cutting and making good the wall and floor as required in all respect as per direction of engineer in charge
1
-
-
Providing , fixing, testing and commissioning of white colour Handrail for fix mounting 600mm long of for physically challanged persons complete accessories complete as required including cutting and making good the wall and floor as required. in all respect as per direction of Engineer -in -Charge
1
-
-
INTERNAL DRAINAGE
-
-
-
Providing, fixing, and testing of uPVC SWR type B pipes and fittings, Push fit type, as per IS 13592 and fittings as per IS 14735 with factory fitted lip ring and complete as per specification and as required Vertical Soil, Waste, Vent/ASP Pipe fixing at wall / ceiling level supported by Painted M.S angle and G.I clamp with rubber line brackets & hangers etc. duly epoxy coated. cutting, chases / holes in floors / walls / slab in all respect as per direction of engineer in charge
-
-
-
75 mm dia
8
-
-
110mm Pipe dia
60
-
-
Providing, laying, jointing and testing uPVC pipes conforming to IS 4985 (6 kg/cm2) including injection moulded fittings with bosses e.g. tees, bends, couplings, adapters etc. and jointing with solvent weld joint, chasing, making wall good with cement and concrete complete as per specification and as required indirect waste Pipe as directed by Engineeer-in-charge.
-
-
-
40 mm dia.
30
-
-
50 mm dia.
10
-
-
Providing, fixing and testing of uPVC P or S trap having 50mm water seal, including jointing, making good the walls, floors etc., complete of nominal size - 110x110mm outlet in all respect as per direction of Engineer -in -Charge
14
-
-
Providing, fixing, testing & commissioning of uPVC inlet fitting with maximum 3 inlets 40, 50 OD size, fixed to uPVC traps including solvent weld joint/rubber ring joint complete with all civil work in all respect as per direction of engineer in charge
14
-
-
Providing ,fixing, testing and commissioning of combination of 110 x 110 mm elbow and 110 x 50 mm eccentric reducer uPVC waste (as Floor Drain) with extension piece, elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to floor trap in all respect as per direction of Engineer -in -Charge
2
-
-
Providing ,fixing, testing and commissioning of heavy duty SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for floor drain and floor trap: Size 100 mm x 100 mm in all respect as per direction of Engineer -in -Charge
10
-
-
Providing and fixing in position square stainless steel cockroch trap consisting of 0.45 mm thick inner and outer cup and 1.0 mm thick top grating (Jali) with ring to be fixed inside ‘P’ traps with cement concrete. (for Floor Trap) - As per approved sample: Size 125 mm x 125 mm in all respect as per direction of Engineer -in -Charge
10
-
-
Providing & fixing clean out plug with suitable openable fittings, male threaded joint with threaded socket fixed to pipe, joints as required complete in all respects : 110 mm dia in all respect as per direction of Engineer -in -Charge
2
-
-
Supplying, fabrication and fixing of MS grating fabricated from 16mm square rod/ 20x4 mm MS flat having 20mm clear spacing, one piece upto 1000mm long, fixing angle iron frame 25x25x4 mm angle with hold fast at 1m c/c in cement concrete and hinged grating madeout of 35x5 mm flats in 1m length inclusiveof welding, griding etc. & including redprimer & two coats of enamel paint and setin cement mortar 1 : 3 (1 cement : 3 coarse sand) complete in all respect 350 mm wide. in all respect as per direction of Engineer -in -Charge
5
-
-
Supply, installation, testing & commissioning of G.I. Pipes Class 'C' (Heavy grade) conforming to I.S. 1239 with G.I. Fittings conforming to IS : 1879 such as tees, crosses, plug, socket, elbows, reducers, flange, check nut, flanges & clamps, hanger, structural steel supports as required / directed at Site including cutting, making good the walls and painting with two or more coats of synthetic enamel paint of approved quality and shade over a coat of approved priming coat as directed by the Project Manager etc. (For Sump riser) 80 mm dia GI Pipe for Sump pump
30
-
-
Providing, laying, jointing and testing uPVC pipes conforming to IS 4985 (6 kg/cm2) including injection moulded fittings with bosses e.g. tees, bends, couplings, adapters etc. and jointing with solvent weld joint, C.I gratings over pipes of bell mouth construction with epoxy painting for terrace, fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling.The Pipes will be supported by either rubber lined G.I. U strap clamps on 50 x 50 x 5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The cost will include all support arrangements with any minor chasing / chopping / civil masonry work. commissioning of all pipes lines as per drawings and specifications and as directed by Project Manager at site.
-
-
-
75 mm dia
6
-
-
110 mm dia
6
-
-
160 mm dia
100
-
-
WATER SUPPLY (INTERNAL)
-
-
-
Providing, fixing, testing and commissioning of PP-r (Polypropylene Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in accordance with DIN EN 21003 for Domestic, Flushing & Hot water application with corresponding hot fusion welded, PR-r fittings like Tees, elbows, sockets, Reducers, Unions, brass wall adaptors (both male and female) etc. Cutting and making good the walls, floors, RCC work etc. cutting chase and filling the same with cement concrete 1:3:6 (1 Cement :3 Coarse sand : 6 graded stone aggregate 20 mm nominal size ) or cement Mortar (1 Cement : 4 Coarse sand) as required. . (Concealed Piping) in all respect as per direction of Engineer -in -Charge
-
-
-
15 mm dia
65
-
-
20 mm dia
25
-
-
25 mm dia
15
-
-
Providing, fixing, testing and commissioning of PP-r (Polypropylene Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in accordance with DIN EN 21003 for Domestic, Flushing & Hot water application with corresponding hot fusion welded, PR-r fittings like Tees, elbows, sockets, Reducers, Unions, brass wall adaptors (both male and female) etc. supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling.The Pipes will be supported by either rubber lined G.I. U strap clamps on 50 x 50 x 5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The cost will include all support arrangements with any minor chasing / chopping / civil masonry work. commissioning of all pipes lines as per drawings and specifications and as directed by Project Manager at site.. (For Shaft and Terrace) in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm dia
20
-
-
32 mm dia
60
-
-
50 mm dia
45
-
-
Providing, fixing, testing and commissioning of forged brass ball valve (PN 10) with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle withfemale BSP threads complete in all respects in all respect as per direction of engineer in charge in all respect as per direction of Engineer -in -Charge
-
-
-
15 mm dia
1
-
-
20 mm dia
2
-
-
25 mm dia
2
-
-
32 mm dia
1
-
-
Providing, fixing, testing and commissioning of cast iron wafer type butterfly valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Project Manager.: 50 mm dia in all respect as per direction of Engineer -in -Charge
2
-
-
Providing, fixing, testing and commissioning of C.I. double acting air release valve of approved quality with bolts, nuts, rubber insertion, tail pieces, tapers, with ball valve etc. as required complete.: 25 mm dia in all respect as per direction of Engineer -in -Charge
3
-
-
Providing ,fixing, testing and commissioning of IP 67 (Weather Proof /Aluminum casing with positioner to indicate the valve position with key type manual overdrive) Motorized Butterfly valve / Ball valve of following dia with limit switch arrangement for filling of over head water tank complete with high and low level float type sensors to control the valve .The sensors shall be installed in over head tanks. The sensors will close the valve when water level is high in over head tank and open the valve when over head water tank level is low. The system should be complete in all respects with control panel indicating the position of valve i.e. open /closed with pressure switches at pump discharge, accessories like wiring / conduting / flanges, nut bolts etc. All the control switchgears, connections, wiring, integration etc. should be included in the quote. No additional payment shall be charge for any work against this item.: 25 mm dia in all respect as per direction of Engineer -in -Charge
1
-
-
Providing ,fixing, testing and commissioning of PVC / HDPE three layer UV protected Circualr tank with all required inlet, internconection outlet, drain provision as per requirement and direction of Engineer -in-charge.
-
-
-
2000 Ltrs
1
-
-
5000 Ltrs
1
-
-
WATER SUPPLY EXTERNAL
-
-
-
Providing,laying and jointing in position PE-80 HDPE pipe confirming to IS: 4984 and suitable working prssure of 12.5 bar and tested at 20 bar pressure with all fitting and accessories e.g - coupling, Tee, bends, reducer, flanged tail pieces etc jointing as per manufacturer specification/instruction. Cost shall inclusive of excavation upto required depth, filling sand alround, consolidation each deposited layer by ramming, watering etc, backfilling and disposing of surplus excavated soil as directed by Project Manager complete in all respect. (External Water Supply). in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm Dia
70
-
-
50 mm Dia
80
-
-
65 mm Dia
30
-
-
Providing and fixing truck fill point consisting of 65mm dia. Water filling point with butterfly valve and NRV having 65mm dia brass plug including suitable locable housing of approved design in all respect as per direction of Engineer -in -Charge
1
-
-
Supplying, fixing, jointing and testing in position the following heavy class (Class C) GI pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 - part 1 to 10) and specials such as bends, tees, unions, reducers, flanges & plugs etc including testing of pipes at twice of working pressure. Cost shall be inclusive of providing two coats of synthetic enamel paint of approved shade on exposed pipes, over a coat of red oxide , primer. Cost shall also inclusive of excavation upto required depth, filling sand alround, consolidation each deposited layer by ramming, watering etc, backfilling and disposing of surplus excavated soil as directed by Project Manager complete in all respect. ( For Garden Hydrant) in all respect as per direction of Engineer -in -Charge
-
-
-
25 mm dia
30
-
-
50 mm dia
200
-
-
Providing and fixing ball valve (PN 10) with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle withfemale BSP threads complete:in all respects: 25mm dia nominal bore in all respect as per direction of Engineer -in -Charge
7
-
-
Providing and fixing 20 mm brass QRQC hydrant valve with PVC lid complete in all respects.
7
-
-
Providing and fixing 20 mm brass keys for hydrant valve complete in all respects.
7
-
-
Providing, fixing, testing and commissioning of cast iron double waffer type flanged butterfly valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Project Manager.
-
-
-
50 mm dia
2
-
-
65 mm dia
1
-
-
Constructing masonry chamber with 75 class designation bricks in cement mortar 1:5 (1 cement : 5 coarse sand) for ball valve with CI surface box 100 mm top dia 160 mm bottom dia and 180 mm deep (inside) with chained lid and RCC top slab 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement and outside plaster finished rough complete as per standard design, including fixing of SFRC heavy duty Manhole cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation, refilling and disposal of surplus earth as directed complete in all respects. (Include the cost of Manhole cover and frame): Inside size 450 x 450 mm & 600 mm deep in all respect as per direction of Engineer -in -Charge
2
-
-
Providing & fixing digital type water meter with direct reading dial in KL with all internal parts in gunmetal or brass, butterfly valve, strainer, flanged distance piece for easy removal in future, Bourden type pressure guage and isolation cock including necessary test certificate for the meter from local municipal authorities in all respect as per direction of Engineer -in -Charge
-
-
-
50 mm dia for Domestic Water Supply Riser
1
-
-
50 mm dia for Municipal Inlet & Irrigation Water Supply
2
-
-
Providing, fixing, testing and commissioning of multistage, horizontal/vertical, centrifugal, 2 pole, 50 HZ, AC pumps incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eliminator pads complete with level controller, electrical control panel / starter panel, necessary wiring / Cabling, pressure gauge, valves, vibration eliminators on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction, delivery headers and interconnecting piping (G.I. Heavy Class) complete in all respects in all respect as per direction of engineer in chanrge
-
-
-
Domestic Trasfer Pumps For Overhead Tank Filling; Flow rate (each) = 2.0 M3 /hr; Pumping Head = 35 m; 1 Set (2 Nos Pumps. 1 Working + 1 Standby); Location : Plumbing Plant Room
1
-
-
EXTERNAL SEWAGE & DRAINAGE WORKS
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc including excavation for socket and dressing of sides ramming of bottoms depth in all lead and .lifts including timbering, shuttering, centering etc. as required getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil within the site premises as specified complete in all respect as per direction of engineer in charge
280
-
-
Making connection of Municipal water line with existing Muncipal line including excavation, construction of valve chamber & making good the walls, floors, road etc. Proper water proofing to ensure no. ground water seepage in the manhole: For upto 100mm dia pipe in all respect as per direction of engineer in charge .
1
-
-
Providing and laying non pressure NP2 class RCC pipes S & S jointed with stiff mixture of cement motrar in the proportion of 1 : 2 (1 cement : 2 fine sand) including testing of joints etc. complete in all respect as per direction of Engineer -in -Charge.
-
-
-
150 mm dia
50
-
-
200 mm dia
180
-
-
250 mm dia
90
-
-
Providing and laying cement concrete 1:5:10 (stone agg. 40 mm nominal size) in bedding & haunches of RCC pipes in all respect as per direction of Engineer -in -Charge
-
-
-
150 mm diameter RCC Pipe
45
-
-
200 mm diameter RCC Pipe
180
-
-
250 mm diameter RCC Pipe
90
-
-
Providing & fixing square-mouth uPVC gully trap complete with grating, brick masonry chamber with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) inside plaster above trap 12mm thick m cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement outside plaster 12mm thick in cement mortar 1 :3 ( 1 cement : 3 coarse sand) 10cm thick foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) space between chamber, and trap filled with cement concrete 1:2:4 (1 cement : 2 coarses and : 4 graded stone aggregate 20 mm nominal size) and water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg asper standard design in all respect as per direction of Engineer -in -Charge
-
-
-
Providing & fixing 300 x 300 mm gully trap chamber with 150 x 100 mm 'P' trap with water tight C.I. cover with frame 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.7 kg as per standard design in all respect as per direction of Engineer -in -Charge
3
-
-
Constructing brick masonry road gully chamber 450 x 450 x 600 mm wtth bricks of class designation 75 in cement mortar 1:5 (1cement : 5 coarse sand), inside cement plastering 12mm thick with cement mortar1 : 3 (1 cement: 3 coarse-sand) finished witha floating coat of neat cement, outside plaster 12 mm thick in cement mortar 1 : 3 (1 cement : 3 coarse sand) 10 cm thick foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) including 500x450 mm RCC horizontal grating wilh frame fixed in15cm thick cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) including excavation, refilling and disposal of surplus earth as directed by PMC complete as per standard design in all respect as per direction of Engineer -in -Charge
4
-
-
For depth of road gully chambers 450 x 450 mm beyond 600 mm in all respect as per direction of Engineer -in -Charge
1
-
-
Constructing brick masonry rectangular type manhole with sewer bricks conforming to IS 4885 in cement mortar 1 : 5 (1 cement : 5 coarse sand) inside cement plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). RCC top slab with 1 : 2 : 4 mix and making necessary channels in cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), inside finished with a floating coat ot neat cement including excavation, refilling and disposal of surplus earth as directed by Project Manager complete as per standard design.900x800mm upto 1500mm deep with ISI marked steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (Heavy Duty HD-20) 560 mm internal diameter in all respect as per direction of Engineer -in -Charge
6
-
-
RAIN WATER HARVESTING SYSTEM
-
-
-
Construction of rain water harvesting size 3m dia x 3.5m effective depth for the re-charging of storm water run off including the civil work with following specification [Construction of Chamber].DE-SILTING CHAMBER: Providing and constructing mansonary de-silting chamber 2000mm x 1500mm with 1.0 m effective depth inside with 75 class designated brick work in cement mortar 1:6 (1cement : 6 fine sand) with C.I double seal heavy duty 560mm dia manhole cover (2 Nos.). top slab 1:2:4 mix (1cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement, foundation concrete 1:5:10 (1cement : 5 fine sand:10 grade stone aggregate 20mm nominal size including baffle wall, necessary excavation, back filling and disposal of surface earth. Complete with inlet, outlet and overflow arrangement. Foot rest @400mm c/c, grating of required size with 16mm sq.bars and frame @20mm clear spacing fixed at month of pipe as per site conditions and direction of Project Manager ; DRILLING: Drilling percolation borehole 200mm dia with reverse rotary method in all types of soil upto 40mm depty including cost for mobilization of rig and making good the area upon completion of work. Contractor shall arrange for all necessary tools, water and consumable and laying for drilling; Providing and laying pea gravel all around the casing pipe; 160 mm dia slotted UPVC pipe of 6 Kg/cm2 - 35 m -40m or as per site sub-strata or set as per direction of Project Manager; 160 mm dia UPVC blind pipe of 6 Kg/cm2; RAIN WATER HARVESTING WELL FILTRATION CHAMBER: Providing and constructing rain water harvesting well/filtration chamber of size 3m dia x 3.5m eff. depth inside with 75 class designated brick work in cement motor 1:6 (1cement : 6 fine sand) with 560mm dia C.I double seal medium duty manhole cover with top slab 1:2:4 mix (1cement : 2 course sand :4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement , foundation concrete 1:5:10 (1cement : 5 fine sand and 10 graded stone) aggregate 20mm nominal size including 300mm duty. Boulder 10-20mm, 300mm duty, gravel 5-10mm size, 300mm depth coarse sand 1.5-2.0mm including necessary excavation, back filling and disposal of surface earth complete with inlet, outlet, overflow arrangement pvc coated Foot Rest, 100mm dia deep holes @500mm c/c to be provided 1200 c/c above the bottom of wall, 100mm C.I vent pipe -2m height with cowls lncluding cost of excavation, back filling and all other operations necessary for completing the job in all respect as per direction of engineer in charge
1
-
-
Providing and constructing Soak pit (2.0 Mtrs. Dia) with septik tank of size 3.0 m x 2.0m and eff. depth 2.0 m inside with 75 class designated brick work in cement motor 1:6 (1cement : 6 fine sand) with 3 Nos. 560mm dia C.I double seal medium duty manhole cover with top slab 1:2:4 mix (1cement : 2 course sand :4 graded stone aggregate 20mm nominal size) with minimum 1.5% reinforcement , foundation concrete 1:5:10 (1cement : 5 fine sand and 10 graded stone) aggregate 20mm nominal size including necessary excavation, back filling and disposal of surface earth complete with inlet, outlet, overflow arrangement pvc coated Foot Rest, 100mm C.I vent pipe -2m height with cowls in all respect as per direction of Engineer -in -Charge
1
-
-
Environment and Social Impact Management
-
-
-
Excavation in earth work and filling in 15 cm. layers in foundation and plinths including ramming, watering and consolidating upto all leads and lifts as per direction of Engineer -in -Charge
10.16
-
-
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:complete in all respect as per direction of Engineer -in -Charge
a) Foundation, footings basis of columns etc. and
mass concrete
14.38
-
-
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete in all respect as per direction of Engineer -in -Charge
4.23
-
-
Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and
curing complete including labour charges in all respect as per direction of Engineer -in -Charge
26.33
-
-
Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor level in all respect as per direction of Engineer -in -Charge .
0.7
-
-
Brickwork using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 cement :6 Sand ) Second Class Bricks in respect as per direction of Engineer-in-charge
16.44
-
-
Super-structure above plinth level upto all floor level (Second Class Bricks). in all respect as per direction of Engineer -in -Charge
42.12
-
-
Providing woodwork in frames of doors, windows,(for 30mm thick shutters of doors and windows)
clestroy, windowa and other frames wrought, framed and fixed in position complete. 2nd class in all respect as per direction of Engineer -in -Charge
0.75
-
-
Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matches first class indian teak plyveneering with vertical grains or cross bends and faces of shutter. 30mm thick
including black enamelled MS butt hinges in all respect as per direction of Engineer -in -Charge
25.56
-
-
Providing 40x3 mm flat iron hold fast etc.
72
-
-
Providing and fixing aluminium Tower Bolts, ISI
marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: in all respect as per direction of Engineer -in -Charge
-
-
-
a) 150x10 mm
12
-
-
b) 100x10 mm
36
-
-
Providing and fixing Aluminium handles, ISI marked,
anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: in all respect as per direction of Engineer -in -Charge
-
-
-
100 mm
18
-
-
125 mm
12
-
-
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of
form work in all respect as per direction of Engineer -in -Charge
8.24
-
-
Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses. 0.63mm thick sheet in all respect as per direction of Engineer -in -Charge
88.68
-
-
Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In beams joists channel ,angles ,tee,flats with connection plates or angles cleats as in main and cross beams ,hip and jack ,rafters,purlins connected to common rafters and the like in all respect as per direction of Engineer-in-charge.
3.96
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more as per direction of Engineer-in-charge.
3.56
-
-
15 mm thick Cement plaster in single coat on fair said of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in grith and finished
even and smooth. (1:4 cement Mortar) in all respect as per direction of Engineer -in -Charge
212.42
-
-
Demolition below G.L. upto 1.50 Metres depth including stacking of serviceable materials and disposal of unserviceable materials within 20 Metres lead and including cutting the necessary
reinforcement and separating from R.B. work. in all respect as per direction of Engineer -in -Charge
16.44
-
-
Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary
reinforcement and separating out from R.B. works in all respect as per direction of Engineer -in -Charge
42.14
-
-
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and
nuts screws etc. complete 250x16mm in all respect as per direction of Engineer -in -Charge
14
-
-
Electrical items (Temporary Worker shed & Creche)
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point / with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed steelconduit, with piano type switch, phenolic laminated sheet, suitable size MS box andearthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required in all respect as per direction of Engineer -in -Charge
40
-
-
Providing & fixing LED bulbs 9W with approved quality and make including bulb holder in all respect as per direction of engineer in charge .
40
-
-
Switch board with 5 AMP 3 pin sockets & switch control
20
-
-
Prefabricated Mobile Toilets
-
-
-
Prefabricated Mobile Toilet( Economy 10 Seater Capacity, with sizes 5.50m x2.70m 3.0 height from Ground. Frame, Pillars, Ladders & railing make SS. Roof door panels are made of FRP along with its proper waste disposal. Unit fixed on wheels for easy movement at Sites as per requirement in all respect as per direction of Engineer -in -Charge
1
-
-
Galvanized structural steel plate 200mm wide 6 mm thick 24m long in all respect as per direction of engineer in charge .
61.6
-
-
Painting
Lettering with paints of approved brand and manufacture with readymixed paint (other than white) letters/figures of 15 cm height in all respect as per direction of engineer in charge .
100
-
-
Painting two coats (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt, dust and other foreign matters: Enamel white paint complete in all respect as per direction of engineer in charge .
1.31
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5kg. I.S.I. Marked in all respect as per direction of Engineer -in -Charge
2
-
-
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 9.0 Kg ISI Marked. in all respect as per direction of engineer in charge .
2
-
-
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.: Capacity 22.5 kg in all respect as per direction of engineer in charge .
1
-
-
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer with stand in all respect as per direction of Engineer -in -Charge
2
-
-
Providing and fixing of Safety siren/ alarm (at admin building) in all respect as per direction of engineer in charge .
1
-
-
Odour Control Unit (Eco-sorb unit) complete in all respects as per direction of Engineer-in-Charge. As mentioned in employers requirment 4A
1
-
-
Solid Waste Equipment - Organic waste converter of capacity 50 Kg/batch (semi-automatic) with process waste collection bins (3 no. of 120 ltr) including concrete base platform and shed complete in all respects as per direction of Engineer-in-Charge. As mentioned in the employers requirement 4A
1
-
-
Providing, fixing, testing and commissioning of multistage, horizontal/vertical, centrifugal, 2 pole, 50 HZ, AC pumps incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eliminator pads complete with level controller, electrical control panel / starter panel, necessary wiring / Cabling, pressure gauge, valves, vibration eliminators on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction, delivery headers and interconnecting piping (G.I. Heavy Class) complete in all respects. - in all respect as per direction of engineer in charge .
-
-
-
Domestic Trasfer Pumps For Overhead Tank Filling; Flow rate (each) = 2.0 M3 /hr; Pumping Head = 35 m; 1 Set (2 Nos Pumps. 1 Working + 1 Standby); Location : Plumbing Plant Room in all respect as per direction of engineer in charge .
1
-
-
Making connection of Municipal water line with existing Muncipal line including excavation, construction of valve chamber & making good the walls, floors, road etc. Proper water proofing to ensure no. ground water seepage in the manhole: For upto 100mm dia pipe in all respect as per direction of engineer in charge .
1
-
-
Escape signs
323
-
-
Fire signs
323
-
-
General signs
323
-
-
Supply and installation of 48 mm thick steel door shutter of 60 min fire rated confirming to BS-476, Part-22 and IS:3614part-II; abricated with 2 Nos. of 1mm thick galvanisedsteel sheet Size 1200 X 2380 MM S/L Sq. mtrs 8.568 with 202 grade SS ball bearing hinges (100x75x3 mm ) Assa Abloy, Fire rated door closer (standard arm) Assa Abloy, 60 min fire rated cleared wired glass (150X750X/7.3 MM), 202 grade SS back to backdoor handle (250 mm) Assa Abloy, Dead lock with 70 mm cylender Assa abloy complete in all respect to the satisfaction of Engiineer In-charge.sandwitching honeycombmaterial in between. Door frame are manufactured with 1.25 mm thick galvanised steel sheet pressed to formdouble rivet profileof size 143x60 mm. The frame and shutterare finished with powder coated in all respect as per direction of Engineer -in -Charge
5.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements