Himachal Pradesh Aquaculture Fishing And Marketing Society Tender

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer Complete in all leads and lifts as directed by E in C.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Complete in all leads and lifts as directed by E in C.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Complete in all leads and lifts as directed by E in C.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge.With cement mortar 1:4(1cement: 4 coarse sand) Complete in all leads and lifts as directed by E in C.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore Complete in all leads and lifts as directed by E in C.

Providing and fixing brass bib cock of approved quality :15 mm nominal bore (Cera,Somani,Jaguar,Hindware,Jal,Roca,Parryware Make) Complete in all leads and lifts as directed by E in C.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore (Cera,Somani,Jaguar,Hindware,Jal,Roca,Parryware Make) Complete in all leads and lifts as directed by E in C.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 90 mm.Complete in all leads and lifts as directed by E in C.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia.Complete in all leads and lifts as directed by E in C.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.110 mm dia.Complete in all leads and lifts as directed by E in C.

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia Complete in all leads and lifts as directed by E in C.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Complete in all leads and lifts as directed by E in C.

Providing and fixing 8mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sidesbore Complete in all leads and lifts as directed by E in C.