Himachal Pradesh Agriculture Development Society Tender

Excavating Trenches of required width for pipes,cables,etc including excavation for sockets,and dressing of sides,ramming of bottoms,depth upto 1.5 m,including getting out the excavated soil,and then returning the soil as required,in layer by ramming,watering,etc. and disposing of surplus excavated soil as directed,within a lead of 50 m :(Item Code HPPWD-SR 2020-2.10.1.2).

Centering and shuttering including strutting, propping etc. and removal of form work for: (Item Code HPPWD-SR 2020-5.9)

Walls (any thickness), including attached pilasters, buttresses, plinth and string courses etc.complete in all respect within all leads and lifts and to the entire satisfaction of the engineer-in-charge. (Item Code HPPWD-SR 2020-5.9.2)

In Foundations,footings,bases for columns.

Edges of slabs and breaks in floors and walls Under 20 cm wide (Item Code HPPWDSR 2020-Chapter 5.9.16.1)

Extra Allowance for formwork in concrete lining in:

Extra Allowance for formwork in concrete lining in: Bed

Extra Allowance for formwork in concrete lining in: Sides

Providing and laying in position cement concrete 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of centering and shuttering - All work upto Plinth Level,complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. -All work upto plinth level.

Providing and laying in position cement concrete 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

All work up to plinth level excluding the cost of centering, shuttering & reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

In retaining walls,return walls,walls,walls (anythickness) including attached pilasters,columns,piers,abutments,pillars,posts,struts,buttresses,string or lacing courses,parapets,coping,bed blocks,anchorblocks,plain window sills, fillets,sunken floor etc., up to floor five level,excluding the cost of centering,shuttering and finishing. (Item code HPPWD-SR 2020:- 4.2.3)

Providing and laying in position reinforced cement concrete 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) and curing complete in :

All work up to plinth level excluding the cost of centering, shuttering & reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. (Item Code HPPWD-SR 2020:- 5.1.2)

In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding the cost of centering, shuttering and reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. (Item Code HPPWD-SR 2020:- 5.2.2)

In beams,suspended floors,roofs having slope up to 15 degree landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding cost of centering ,shuttering,finishing and reinforcement (Item Code HPPWDSR 2020 -Chapter 5.3)

Providing and laying cement concrete 1:1:2 (1cement:1sand:2 graded stone aggregate 20 mm nominal size) curing complete excluding cost of formwork. (Item Code HPPWDSR 2009-09170000).Foundation and Plinth (Item Code HPPWDSR 2009-0917010A).

Providing and laying cement concrete 1:1:2 (1cement:1sand:2 graded stone aggregate 20 mm nominal size) curing complete excluding cost of formwork and reinforcement in reinforced concrete work.(Item Code HPPWDSR 2009-09330000).Walls i/c attached buttresses,pilasters and their caps and bases string courses etc. upto floor two level. (Item Code HPPWDSR 2009-09330100).

Providing cement concrete lining 15 cm thick or less for irrigation channels, using cement concrete 1:2:4 (1 cement2 sand :4 stone aggregate 20 mm nominal size) in:

In Bed complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

In walls complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing Mild steel / tor steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete upto plinth level and above plinth level in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. (Item Code HPPWD-SR 2009:- 5.22 & 5.22A)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings,frames,guard bar,;adder,railings,brackets,gates and similar works ,complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. (Item Code HPPWD-SR 2020:- 10.25.2)

Providing and fixing CI Sluice Valve 200 mm dia 10.2 kg/cm2 Kartar make i/c MS Flange of Table as per IS 6392-1971 of WT of 121.50 kg & Welding of MS Flanges in two layers on both faces and i/c carriages in all respects within all leads & lifts.

Providing and fixing CI Sluice Valve 150 mm dia 10.2 kg/cm2 Kartar make i/c MS Flange of Table-5 as per IS 6392-1971 of WT of 71.30 kg & Welding of MS Flanges in two layers on both faces and i/c carriages in all respects within all leads & lifts.

Providing and fixing CI Sluice Valve 125 mm dia 10.2 kg/cm2 Kartar make i/c MS Flange of Table as per IS 6392-1971 of 5 WT of 56.30 kg & Welding of MS Flanges in two layers on both faces and i/c carriages in all respects within all leads & lifts.

Providing, Laying, Testing & Jointing in trenches (to level or grade) G.M.S tube of 150 mm dia (M Class) conforming to IS:1239-2004(Part-i) (latest upto date ammendments) of grade and wall thickness as specified below,suitable to withstand required hydraulic test pressure in random length 4 m -6 m with plain ends. The laying of Pipes conform to IS 5822-1994 and as per CPHEEO mannual and will include all operations such as cutting,welding and jointing bends etc. including flushing,cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials upto all leads and lifts. (Earth work in trenches,butt welding will be measured and paid for seperately)

Providing, Laying, Testing & Jointing in trenches HDPE pipes of following diameters & classes as per IS 4984, PE-80 and jointing the pipes through push type compression joints by hydraulically operated machines upto 110 mm diameter and butt fusion (heat fusion process) above 110 mm diameter i/c necessary fittings,bends,tees & reducers fabricated in accordance with IS 8360 & IS 8008 with latest ammendments & shall be provded as per site conditions. Flanging of the pipes shall be made as & where required confirming to code IS 8008 & IS 7634, stub ends will be welded on pipes & MS flange shall be provided with slip on covered by epoxy coating/plastic powder. The flange should be confirm to ANSI B 16.5 with necessary nuts & Bolts.Jointing shall be complete in all respects i/c at site upto entire satisfaction of engineer-n charge.

160 mm, PN 6 Class, PE-100

125 mm, PN 6 Class, PE-100

Weep Holes 90 mm, PN 6 Class, PE-100

Providing and fixing ISI Marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. complete: 100 mm (Item Code HPPWD-SR 2020:- 10.25.2)

Providing,Laying,jointing,testing & commisioning at site in trenches bevelled ended BIS marked MSERW pipes 200 mm dia of various grade conforming to IS/ISO-3183-2012 1260 or N42 or its equivalent specificationds latest with upto date ammendments of following dia with upto date ammendments having wall thickness and per Rmt weight as mentioned below & capable of withstanding required test pressure as prescribed in BIS code in random lengths of 6 to 7 mtr. The pipes ends shall be bevelled suitable for butt welding including the cost of jointing with butt welding conforming to IS 816-1969 or latest as applicable ends with upto date ammendments (leak proof) in three layers at site of work with welding rods of standard make and all allied accessories whatever required for welding at site,tail pieces,tees,bends,and other specials manufactured from parent pipes as applicable to the particular reach & of approved specificationsas per site conditions and cutting of pipes wherever required as per site requirement including carriage in all leads and lifts and as directed by Engineer-in-charge.The pipes shall have zinc coating inside & outside conforming to IS/ISO 4736-1986 or latest with upto date ammendments and shall be engraved with IS/ISO-3183-2012 or its equivalent.The laying shall conform to BIS 5822-1970 or latest with upto date ammendments with provision of scour pipe after every km by providing Tee & sluice valve etc. complete to the entire satifaction of Engineer-in-Charge (Earth work shall be measured and paid for seperately.) Trenches to be measured paid for seperately.

Providing & Making Gabion Structure with Mechanically Wooven Double Twisted Hexagonal Shaped Wire Mesh Gabion Boxes as per IS:16014:2012,MORTH Clause 2500,of required size,Mesh Type 10x12(D=100MM with tolerance of 2%) Zinc=PVC coated,Mesh wire diameter 2.7/3.7mm,mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist,tying with lacing wire of diameter 2.2/3.2mm (ID OD),supplied @3% by weight of Gabion boxes,filled with boulders with least dimension of 200 mm,as per drawing,all complete as per directions of Engineer-in-charge.(Item Code HPPWDSR 2020 Chapter 16.94)

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufactures specifications including appropriate priming coat, prepration of surface, etc. complete and to the entire satisfaction of the Engineer-in-Charge.

Writing new letters and figures of any shade with synthetic enamel black or any other approved colour to give an even shade as per drawings and technical specifications clause 1701 in English and roman, hyphen, commas and the like not to be measured and paid complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.