East Central Railway Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Costs
EMD
₹ 12,04,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Design, Manufacturing, Supply, Installation, Testing And Commissioning Of Centralized Ei system (indoor & Outdoor) At Asanpur Kupha , Jhajha , Baijnath Andoli Stations Along With alteration In Existing Centralized Ei Siemens Mk-ii System With New One End Cabin At lalitgram Station Including Telecom Works In Saraigarh - Nirmali Section In Spj Division Of east Central Railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
ECR-SnT-C-142-CAO-C-HQ-S AND T/EAST CENTRAL RLYTender No
ECR-SnT-C-142Tender Authority
East Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
GROUP-A- CABLE LAYING - Item No. 4 - Excavation, trenching, earth work and reinstatement of track while track crossisng.
400
35
55424.6
GROUP-A- CABLE LAYING - Item No.-5 - Reinstatement of platform and repairing to original state after cable laying work. 6 50.00 Metre 150.00 7500.00 295.89 29691.75 6
100
100
39589
GROUP-A- CABLE LAYING - Item No. 7i - Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.-I) 16 Core to 30 core signalling cable
5
3400
67301.3
GROUP-A- CABLE LAYING -Item No.7ii- Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.-ii) 2 core to 12 core signalling cable.
270
2900
3099818.7
GROUP-A- CABLE LAYING - Item No.-7iii - Laying cable of different sizes as per cable route plan approved by Railway and meggering of all main & tail cables as per technical specification of tender.-iv) Telecom Cable 5 Prs./10 Prs./Quad
30
3000
356301
GROUP-A - CABLE LAYING Item No. 9 (a) - Supply of G.I. Pipe with threaded collars of 100 mm 10 nominal bore specn. No. IS 1239 medium grade.Perforated of required length on bridge / below metalled road/ L - Xing /Culvert as per technical specification of tender. - a) Supply portion for the G. I. Pipe & collars. - Inspection: Consignee.
200
335
265246.3
GROUP-A - CABLE LAYING Item No. 9(b) - Fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn. No. IS 1239 medium grade.Perforated of required length on bridge / below metalled road/ L - Xing /Culvert as per technical specification of tender. - b) Execution with remaining miscelleneous materials
200
15
11876.7
GROUP-A- CABLE LAYING - Supply of galvanised iron trunking with cover of same materials as 12 ser DRG. No. SGW/MGS/C7/91 and fixing on girder bridges including supply of channel, angle iron, bracket units, nuts and bolts of proper size & fitting of support at an interval of 1mtr including laying of cables inside the trough & filling with bitumen compound as per spec. no. IRS-TC-25/76 after cable is laid. Bitumen compound and other materials as required for the work shall be supplied by the contractor.- a) Supply portion - Inspection: Consignee.
100
540
213780.6
GROUP-A- CABLE LAYING - Fixing of galvanised iron trunking with cover of same materials as ser 13 DRG. No. SGW/MGS/C7/91 and fixing on girder bridges including supply of channel, angle iron, bracket units, nuts and bolts of proper size & fitting of support at an interval of 1mtr including laying of cables inside the trough & filling with bitumen compound as per spec. no. IRS-TC-25/76 after cable is laid. Bitumen compound and other materials as required for the work shall be supplied by the contractor.- b) Execution Portion
100
200
79178
GROUP -B-SIGNAL & RELATED ITEMS - Item no.2-Supply of CLS Post 4.5 mtr. and Ladder 4.5 Mtr. With bases as per RDSO DRG.No.SA.5533/ADV.and RDSO Spec.No.S6-81. - Inspection : RITES
30
7150
849184.05
GROUP -B-SIGNAL & RELATED ITEMS - Item no.3- Supply of CLS Post 3.5 mtr. and Ladder 3.5 Mtr. With bases as per RDSO DRG.No.SA.5533/ADV.and RDSO Spec.No.S6-81. - Inspection : Consignee.
16
6050
383221.52
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 13 - Supply of calling ON signals colour light 16 type (RDSO DRG. No.SA-24351/ADV) without lamp but complete with lense 3 Pin lamp holders lense cover (wire mesh guard of expanded metal of size 2" x 1" and mounting bracket with U-Clamps nuts & washer as per RDSO DRG. No. SA 24351(ADV). Inspection - Consignee.
13
1325
68192.05
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 14 - Supply of offset bracket for colour/position 17 light signal (140mm outside Dia) post with U- clamps, nuts, washers complete as per RDSO DRG. No. SA 23080 /ADV/ALT-1. Inspection - Consignee -- Note- Proper size offset bracket for position light shunt signal to be supplied.Site engineer to give details of the off set bracket to the contractor, before supply.
13
775
39885.92
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 15(i) - Supply of enameled number plate of size 8" Dia (letter in black on white background with complete clamping arrangement- 23476 (ADV.).-- (I) C-Marker - Inspection - Consignee.
13
95
4889.24
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 15(ii) - Supply of enameled number plate of 19 size 8" Dia (letter in black on white background with complete clamping arrangement- 23476 (ADV.). -- (ii) P- Marker - Inspection - Consignee.
10
95
3760.95
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 15(iv) -Supply of enameled number plate of size 8" Dia (letter in black on white background with complete clamping arrangement- 23476 (ADV.). -- (iii) G- Marker - Inspection - Consignee.
2
95
752.19
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 18 - Casting, concreting and curing of foundation for Main signal and as per DRG.No.SGW/MGS/S1/91 including cost of all materials required for casting and concreting and provision of holding down bolts & nuts.
46
2300
418851.62
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 19 - Casting, concreting and curing of foundation for Shunt signal and as per DRG.No.SGW/MGS/S1/91 including cost of all materials required for casting and concreting and provision of holding down bolts & nuts.
10
1000
39589
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 23 (i) - Installation, Erection laying out of tail cable from Loc. Box and wiring of Shunt signals per technical specification in the tender. - (i) independent position light shunt signal
10
200
7917.8
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 23 (ii) -Installation, Erection laying out of tail cable from Loc. Box and wiring of Shunt signals per technical specification in the tender. - (ii) On offset bracket
12
200
9501.36
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 24 - Installation, Erection & laying out of tail cable from loc.box and wiring of Calling On signal on same post below main signal as per technical specification in the tender.
10
200
7917.8
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 25 - Provision of screen on signal by expanded 26 metal (size 20 mm x 60 mm strand, 3.2 mm wide and 1.6 mm thick)- a) as per instruction of sight engineer incharge. This includes supply of all materials including earth electrode and earthing arrangement(supply and installation) - Inspection- Consignee.
2
3000
23753.4
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 27 (a) -Supply of SLB/BSLB/SB for SLB/BSLB REF. RDSO DRG. No.SA- 2373(with latest amendment). Inspection : Consignee.
2
475
3760.95
GROUP -B-SIGNAL & RELATED ITEMS - Item No. 27 (b)- Casting, Concreting and curing of foundation & erection for SLB/BSLB/SB as per DRG. No. S&T/C-34 (NKG). Including supply & fixing of holding down bolts & nuts.
2
2300
18210.94
GROUP C -- LOCATION BOXES - Item No. 1 (i) - Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91 - i) 6 way - Inspection : RDSO.
2200
220
1916107.6
GROUP C -- LOCATION BOXES - Item No. 1 (ii) - Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91 -- ii) 1 way - Inspection : RDSO.
2000
30
237534
GROUP C -- LOCATION BOXES - Item No. 3 - Supply of Bakelite Strip/Sheet of Size (950 x 75 x 12) mm. For fixing 30Nos. ARA terminals/Fuse base terminals/Fuse base. Inspection : RITES.
1000
160
633424
GROUP C -- LOCATION BOXES - Item No. 4 - Casting, Concreting and Curing of foundation and 32 erection for full apparatus case(GKP- type) as per DRG No. SGW/MGS/L1/91 including cost of all materials required for fixing holding down bolts, casting, concreting and fixing of "E" type lock. {Note:i) The contractor will provide holding down bolts, ii) Bottom of apparatus cases should be filled with sand and the top surface covered with masonry work and neat cementing.}
240
1550
1472710.8
GROUP C -- LOCATION BOXES - Item No. 5 - Casting, Concreting and Curing of foundation and 33 erection for Half apparatus case(GKP- type) as per DRG No. SGW/MGS/L1/91 including cost of all materials required for fixing holding down bolts, casting concreting and fixing of E type lock. {Note:i) The contractor will provide holding down bolts, ii) Bottom of apparatus cases should be filled with sand and the top surface covered with masonry work and neat cementing.}
40
1275
201903.9
GROUP C -- LOCATION BOXES - Item No. 6 - Casting, Concreting and Curing of foundation for Quarter Size apparatus case(GKP- type) including cost of all materials required for fixing holding down bolts,casting concreting and fixing of "E" type lock. {Note:i) The contractor will provide holding down bolts, ii) Bottom of apparatus cases should be filled with sand and the top surface covered with masonry work and neat cementing.}
2
1000
7917.8
GROUP C -- LOCATION BOXES - Item No. 7 -Fixing, wiring of terminal strips, bakelite strip, 35 transformers,relays fuses with base and supply and fixing of shelves for full appratus case with termination earthing of cable and wiring with lettering as required including supply of wires and micsellenous materials, sand filling and plastering over sand filling per location.(All materials except transformers, relay, terminal strips, bakelite strip and fuses with base to be supplied by the contractor.) Inspection- (RDSO for PVC wire).
240
1450
1377697.2
GROUP C -- LOCATION BOXES - Item No. 8 - Fixing, wiring of terminal strips, bakelite strip, 36 transformers, relays,fuses with base and supply and fixing of shelves for half apparatus case with termination, earthing of cables and wiring with lettering as required including supply of wires and miscellenous materials, sand filling and plastering over sand filling per location.(Materials other than transformers, relay, terminal strips, bakelite strip and fuses with base to be supplied by the contractor.) Inspection- (RDSO for PVC wire).
40
850
134602.6
GROUP C -- LOCATION BOXES - Item No. 9 - Fixing of terminal strip, Bakelite strip for JN. Box/ 37 Quarter location Box(GKP type) including all cable termination and earthing of cable complete with lettering as required including supply of miscellenous materials, sand filling and plastering over sand filling per location. (Materials other than terminal strips, bakelite strip to be supplied by the contractor.) Inspection- (RDSO for PVC wire).
2
390
3087.94
GROUP-D - TRACK CIRCUITS - Item No. 3 - Supply of B-Type choke coil having anneled enamelled copper wire for DC track circuit SPECN.No. IRS-S-65/83(Latest) - Inspection - RDSO.
158
1900
1188461.78
GROUP-D - TRACK CIRCUITS - Item No. 5(i) - Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/Relay Rack. - i) Fuses (2A, IRS : S-78/92) - Inspection - RDSO.
1000
27
106890.3
GROUP-D - TRACK CIRCUITS - Item No. 5(ii) - Supply of PBT fuse block with inserts cartridge type, to be mounted inside the location Box/Relay Rack. - ii) Fuse Base (DRG No. SA - 23748, IRS: S-75/91) - Inspection - RDSO.
1000
80
316712
Supply of insulated rail joint as per RDSO drawing no. SA/22101, SA/22111, SA/22171 & as per specification IRS-S-40/84 or latest (i)- 60 KG Inspection -Consignee.
20
500
39589
GROUP-D - TRACK CIRCUITS - Item No. 7 -Supply of PVC/PE insulated (2mm minimum) stranded 42 flexible galvanised wire of size 7/1.63mm for track jumpers as per Spec. IS - 214C/62 and wrapping test as per clause 14 of IRS - S3 (Max. electrical resistance 12 ohm/Km. At 20 degree celcius with electrically insulating PVC extruded jacket 2mm (Min.) thickness. Inspection : RDSO.
9
16000
570081.6
GROUP-D - TRACK CIRCUITS - Item No. 8 - Supply of 8 SWG soft drawn GI wire bond pieces(1320x4)mm.Resistance upto 19.5 OHM/MT. To IS - 280 & IS - 23. - Inspection : Consignee.
8000
4
126684.8
GROUP-D - TRACK CIRCUITS - Item No. 9 - Supply of channel Pin with single groove 7.2 mm Dia for 4 mm Dia bond wire to DRG. No. S-69/M & IRS Specn. IRS:S-S17.- Inspection : Consignee.
8000
1
57008.16
GROUP-D - TRACK CIRCUITS - Item No. 11 (i) - Installation wiring, testing and commissioning of Single/Double rail DC track circuit as per approved track circuiting plan. The work includes track battery charging and installation, track bonding (double ) with 8 SWG soft GI Wire laying of tail cable with track lead junction box, 45 rail connector with Galvanised iron wire track lead junction box, rail connector with Galvanised iron wire track jumpering with supporting arrangement for holding as per IYD plan. It also includes installation and wiring of track feed chargers, track relays, track circuit, equipment in the location box including fuses and ARA terminals required for the purpose as per Drg.No.SK/10/95(NKG) including drilling of 9/32" Hole on rails where required fixing of track lead junction boxes provison of tail cable terminations etc. --- i) Track Circuit (Beyond 200 Mtrs.)
24
1100
104514.96
GROUP-D - TRACK CIRCUITS - Item No. 11 (ii) - Installation wiring, testing and commissioning of 46 Single/Double rail DC track circuit as per approved track circuiting plan. The work includes track battery charging and installation, track bonding (double ) with 8 SWG soft GI Wire laying of tail cable with track lead junction box, rail connector with Galvanised iron wire tracklead junction box, rail connector with Galvanised iron wire track jumpering with supporting arrangement for holding as per IYD plan. It also includes installation and wiring of track feed chargers, track relays, track circuit, equipement in the location box including fuses and ARA terminals required for the purpose as per Drg.No.SK/10/95(NKG) including drilling of 9/32" Hole on rails where required fixing of track lead junction boxes provison of tail cable terminations etc. --- ii) Short length track circuit upto 200mts.
24
1100
104514.96
GROUP-D - TRACK CIRCUITS - Item No. 12 - Installation wiring, testing and commissioning of track circuit involving points & crossing as per Track circuiting plan. Track Battery charging and installation including drilling 9/32'' hole on rails. Installation of bonding, double with 8 SWG soft GI Wire insulation of strecher 47 bars double with 8 SWG soft GI Wire insulation of strecher bars (leading & following), guage/crossing tie plates involving cutting & rivetting/welding of angle clit, split stracher bars, fixing of track lead junction boxes. Laying of tail cable with track lead junction box, rail connector with GI wire track jumpering with Including series jumpers, Jumper wire terminals, track feed set (track charger adjustable resistance, choke, coil, fuses, battery etc.) as per approved IYD for point zone track circuit.
24
1100
104514.96
GROUP-E - POINTS - Item no. 1 - Supply of point JB fitted with 18 Nos. 1 way ARA PBT terminal 48 block conforming to IRS - S- 75/91 with 3 Nos. of 40mm Bore. GI pipe 600 mm long as per DRG No. SGW/MGS/PT4/91 fixed on hard wood plank with U-channel (75 x 40 x 1500) mm for fixing. - Inspection - Consignee, PBT terminal-RDSO.
18
1150
81949.23
GROUP-E - POINTS - Item no. 2 (ii) (a) - Supply of complete ground fittings for point machine, 49 including insulated stretcher Bar Switch extension piece etc. and all other accessories required for installation. - DRG. No.SGW/S/2/HWH/1/92. - Inspection - Consignee. -- ii) For IRS point machine (Spec. IRS - 24/90) - a) Turn out (RDSO DRG. No. SA - 8800-01) - Inspection-Consignee, Insulation material-RDSO.
18
4300
306418.86
GROUP-E - POINTS - Item no. 3 (ii) (a)- Dismantling of existing point fittings drilling of holes in stock rail/tongue rail / guage tie plate and installation of electric point machines on MS plate fixed on wooden / concerete sleepers complete with fixing of junction boxes, ground conncection including smithy works involved, 50 insulation of MS plate on which the point machine is to be fixed from the guage tie plate involving revetting/welding of angle cleats, installation of point JB, Terminiation of cable, Priliminary adjustment for operation of points by crank handle painting and lettering as required including wiring testing and commissioning as per technical specification. ii) For IRS point machine (Spech. IRS 24/90) -- a) Turn out ---- {Note - MS plate / Flat/ Anglle/ Angle cleats, paints, bolts & nuts and washers of sizes as required for fixing the point machine shallbe supplied by the contractor except point machine.}
18
3000
213780.6
GROUP-E - POINTS - Item no. 4 (a) - Dismantling of existing point fittings, drilling of holes in stock rail/tongue rail / gauge tie plate, rearrangements and refixing of existing electrical detector and installation of IRS 51 24/90 point machine on MS Plate fixed on wooden/concrete sleepers complete with fixing of PT JB. Ground connection including smithy job for welding, termination & wiring of PT machine adjustment and testing as per technical specification and dismantling of all new fitting excluding point machine and marking with paint for future and transportation upto Railways store. ---- a)Turn out (Facing point Layout)
1
4700
18606.83
GROUP-E - POINTS - Item no. 5 (a) - Dismantling of existing point fitings and installation of already 52 prepared and matched point fitting sets for point machine of IRS 24/90 type with final testing and commissioning from panel as per technical specification including transportation from railway store. -- a) Turn out (Facing point layout)
1
3000
11876.7
GROUP-E - POINTS - Item no. 6(a) - Supply of electrical detector as per specficitions IRS - S- 49/74 and DRG. No. SA - 23331. Inspection - RDSO.
1
3500
13856.15
GROUP-E - POINTS - Item no. 6 b (i) -Installation testing and commissioning of electric detectors complete.(All materials except electric detectors will be supllied by the contractor). -- i) Without bolt detection
1
3100
12272.59
GROUP-F -- POWER - Item no.- 4(c) -Supply of lead acid secondary cell to IS-1651 and RDSO letter No. STS/E/Cells/Secondary with intercell connectors, level indicator, porcelain insulator, for mounting and ceramic vent plug. - c) 80 AH. Inspection-RDSO. (Number means Cell)
237
1400
1313563.02
GROUP-F -- POWER - Item no.- 6 (c) - Charging of lead acid secondary cells of various capacities as per manufactures instruction/ railway engineer's instructions. Acid & distilled water will be suppled by the contractor. -- c) 80 AH (12 Cell)
20
1800
142520.4
GROUP- G -- INDOOR - Item no. 3 (a) -Supply of CT rack (DRG.N0.S&T/C-19/2001/ER) complete with all fittings including 6 way PBT terminals as per Spec.No. IRS- 79/92. Note: PBT terminals to be inspected by RDSO and CT-Rack - RITES.
11
15000
653218.5
GROUP- G -- INDOOR - Item no. 3 (b)(i) - Installation of cable termination Rack with scaffolding 58 materials; ladder for supporting outdoor cable; wire guide; complete with other necessary hardwares as per requirements of Rly. & erection materials . (Rate & Station Wise Qty. to be specified by the tenderer.) -- i) Upto 4 to 5 Line Station
4
1500
23753.4
GROUP- G -- INDOOR - Item no. 5(i) (a) - Preparation of cable route plan, cable core chart, power 59 supply layout, cable termination chart in relay room and location box. Location wiring plan, cable insulation chart, fuse analysis, equipment disposition plan, track bonding plan, as per railways practice. i) All the above plans for end bunglow also to be submitted.All diagrams/plans to be submitted in polyester film tracing to the railways along with 6 sets of ferro prints of the above. The diagrams/plans should also be submitted in CD. a) up to 4 line station.
4
35000
554246
GROUP- H - MISCELLANEOUS - Item no. 1(a) - Supply of earth electrode. Materials to be procured as per E. Rly Sketch No. SGW/T/3/G/8/89. Inspection-Consignee
210
500
415684.5
Group-H- Item no. 1(b)- Fixing of earth electrode including earth wire as per drawing no. S&T/C- 41(NKG) for apparatus cases, signal post and other equipment as per instruction of site engineer. Note- All materials except earth electrode shall be supplied by contractor required for execution of work.
-
190
295.89
GROUP- H - MISCELLANEOUS - Item no. 3(a) - Supply of electrical key transmitter for crank handle interlocking arrangement siding control, LC Gate control as per yard diagram,approved circuit diagram and IRS Spec.No.IRS-S-21/64.and IRS S-23 (latest) --Inspection - RDSO.
40
2500
395890
GROUP- H - MISCELLANEOUS - Item no. 3(b) - Installation of electrical key transmitter on suitable 63 bracket as per inspection of site engineer., wiring and testing of electrical key transmitter for crank handle arrangement, siding control, LC gate control as per yard diagram approved circuit diagram etc. {Note:- (i)The Latest Alteration/Amendments shall apply to all the Drawing/Specifications. (ii) Material will be supplied as per requirement of site & as per instruction of Executive In-Charge of the project.}
24
3880
368652.77
Group 'A' Cable Laying - Item No.1 (a) - Supply of double walled corrugated (DWC) pipes for 1 underground power/communication / signal / OFC protection with IS: 16205(24):2018 along with the socket/ coupler. T-Joints to be provided at the junctions wherever required. (a) Size of outer dia 200 mm / inner dia.175 mm. Inspection - RITES.
1500
400
1891014.48
Group 'A' Cable Laying - Item No.1 (b) - Supply of double walled corrugated (DWC) pipes for 2 underground power/communication / signal / OFC protection with IS : 16205(24):2018 along with the socket/ coupler. T-Joints to be provided at the junctions wherever required. (b) Size of outer dia 175 mm and inner dia 148 mm. Inspection - RITES.
1500
346
1634349.84
Group 'A' Cable Laying - Item No.2 - Installation of Double Wall Corrugated (DWC) pipe with socket coupler. This includes trenching (1.2 mtr. Depth) and back filling.
1000
38
119965.56
Group 'C' Locations - Item No.1 (a) - E-type lock. (a) Supply of E-type lock without key, spec.no.IRS-S-30, Drg.no.S-3376/M key -S-3377/M. Individual number of miniature E locks and Normal size of locks required at site to be decided by the site engineer as per site requirement. Inspection - Consignee. C1b 10.00 Numbers 78.31 783.10 214.54 2463.16
30
521
49211.67
Group 'C' Locations - Item No.1 (c) - E-type lock. (c) Miniature lock. Inspection - RITES.
1000
419
1320344.56
Group 'C' Locations - Item No.2 -Supply of full size location box as per design of GKP signal workshop Inspection - RITES
250
9260
7281781.86
Group 'C' Locations - Item No.3 - Supply of half size location box as per design of GKP signal workshop. Inspection - RITES
40
7635
960663.04
Group 'C' Locations - Item No.4 - Supply of quarter size apparatus case as per design of GKP signal workshop. Inspection - Consignee.
2
4639
29184.59
Group 'C' Locations - Item No.5 - Filling earth around location box/signal post for a width of 0.5 m on all sides, upto a level of 150 mm below the foundation top. This work includes consolidation of earth by watering.(Unit CUM means per CUM)
50
71
11181.9
Group 'D' Miscellaneous - Item No.1 - Supply of magneto telephones with all accessories including 11 3 nos. Primary cell, each telephone with wooden battery box. Spec.no.IRS-TC-36/97 for magneto telephone, for primary cell - Spec.no.IRS-S-95/96. Material to be procured from RDSO approved firm only. Inspection - Consignee.
8
3288
82757.24
Group 'D' Miscellaneous - Item No.2 (b) - Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. (b) 6 Amp. Capacity. Inspection - RDSO.
300
36
34508.18
Group 'D' Miscellaneous - Item No.2 (e) - Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type. (e) 16 Amp. Capacity. Inspection - RDSO.
150
30
14234.51
Group 'D' Miscellaneous - Item No.3 - Supply of slotted angle (40 x 40 x 2 mm). Inspection - RITES.
2400
93
709526.75
Group 'D' Miscellaneous - Item No.4 - Supply of paper base hylum sheet 12 mm thick. Inspection - RITES.
55
3153
545461.27
Group 'D' Miscellaneous - Item No.5 - Supply & installation of portable CO2 extinguisher (4.5 kg) Inspection - Consignee.
16
6280
316096.6
Group 'D' Miscellaneous - Item No.6 - TAPARIA make or other standard brand tool kits set 17 consisting following tools in leather bag . The details of the 6 peice tools bags are as follows- (a) Insulated Plier 8" - 1 No (b) Adjustable slide wrench 8"- 1 No. (c) Nose Plier 6"- 1 No. (d) Screw driver 8" - 1 No. (e)Line tester 818 no. - 1 No. (f) Screw driver Philips 904 no. -1 No. Inspection - Consignee.
4
724
9117.63
Group 'D' Miscellaneous - Item No.7 - Supply of tools & plants, measuring instruments (Taparia make or other standard brand ) Each set containing the following items i) Cutting plier (Taparia make) 200 mm insulated. = 1 no. ii) Nose plier round insulated, 150 mm (Taparia make) = 1 no iii) Screw diver adjustable with common handle for different screw diver (Taparia make) = 1 no. iv) Spanner double ended, 34 mm = 1 no. v) Hammer ball pans, 1.5 lbs = 1 no. vi) Electric soldering iron (Philips/Soldron make), 230 V, 60 Watt. = 1 no. vii) 18 Wire cutter insulated (Taparia make) = 1 no x) Spanner set double end (Chromium plated, (Taparia make) = 1 no. ix) Wrench adjustable sf 305 mm (Taparia make)=1 no. x) Spanner double ended, 25 mm = 1 no.xi) Megger, 0- 500 volt (Motvani/Shanti make)= 1 no xii) Digital multimeter with following range= 1 no. a) 0-1000V AC/DC b) 0-10 Amp c) 0-1000 Ohms 3-1/2 digits The meter shall be supplied with test probes, leather cover battery and of reputed make like Philips/Meco or similar. xiii) Box spanner insulated 1/4 inch x 3/8 inch = 1 no. xiv) Box spanner insulated 3/8 inch x 1/2 inch = 1 no. xv) True RMS digital multimeter of 4 1/2 digits capable of measuring (i) 10 Amp AC and DC current (ii) True RMS voltage with a bandwidth of 5 Khz. Similar to Escorts 97 or Fluke. xvi) Drill bits 7 mm - 7 nos. Inspection - Consignee.
4
59377
747065.72
Group 'D' Miscellaneous - Item No.8 (a) - Supply of operation aids for station staff . (a) Godrej chair model PCH - 7002 or better. Inspection - Consignee.
8
9533
239894.12
Group 'D' Miscellaneous - Item No.8 (b) - Supply of operation aids for station staff . (b) Godrej Chair model KES - CH4 as supplied in ECR or better. Inspection - Consignee.
8
1715
43160.17
Group 'D' Miscellaneous - Item No.8 (c) - Supply of operation aids for station staff . © Godrej Office table model T-8 or better. Inspection - Consignee.
8
6883
173198.31
Group 'D' Miscellaneous - Item No.8 (d) -Supply of operation aids for station staff . (d) Godrej Slimline storewell Plain of size 1950 mm(H)x 507 mm (D) Approx with four adjustable shelves. Inspection - Consignee.
8
9985
251279.21
Group 'D' Miscellaneous - Item No.8 (e) - Supply of operation aids for station staff . (e) Steel almirah big size-78"x36"x19" having four shelves with 5 compartments of C.R. sheet 22 gauge with spray painting.( Model BSW-AL-2B ) - to keep records of Data logger, Axle counter, IPS. Inspection - Consignee.
8
4758
119729.27
Group 'D' Miscellaneous - Item No.10 (i) (a) - Painting of two coats of enamel paint over one coat 24 of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (i) Location boxes inside and outsided surfaces with Aluminium paint. (a) Single case.
240
444
335634.31
Group 'D' Miscellaneous - Item No.10 (i) (b) - Painting of two coats of enamel paint over one coat 25 of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (i) Location boxes inside and outsided surfaces with Aluminium paint. (b) Half case.
40
344
43333.55
Group 'D' Miscellaneous - Item No.10 (i) (c) - Painting of two coats of enamel paint over one coat 26 of red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (i) Location boxes inside and outsided surfaces with Aluminium paint. (c) Quarter case.
2
196
1235.32
Group 'D' Miscellaneous - Item No.10 (ii) - Painting of two coats of enamel paint over one coat of 27 red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (ii) Main signal post, signal unit, surface base and complete fitting as per ECRly standard practice.
46
359
52086.38
Group 'D' Miscellaneous - Item No.10 (iii) - Painting of two coats of enamel paint over one coat of 28 red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (iii) Shunt signal post.
10
170
5359.45
Group 'D' Miscellaneous - Item No.10 (iv) - Painting of two coats of enamel paint over one coat of 29 red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (iv) Point machine with ground connections complete(Point machine with black enamel only outside and ground connection with red oxide).
14
120
5307.17
Group 'D' Miscellaneous - Item No.10 (vi) - Painting of two coats of enamel paint over one coat of 30 red oxide primer and there after numbering on the following items after scraping and cleaning of the surface where ever necessary. Primer and paints both Asian paint make are to be supplied by the contractor. Numbering is to be as per practice of the ECR and directives of the site Engineer. (vi) Electrical detector with ground connection complete. D11 120.00 KVA 494.72 59366.40 214.54 186731.07
1
97
307.37
Group 'D' Miscellaneous - Item No.12 - Transportation of materials by 9MT capacity truck.
4000
20
258048.62
Group 'D' Miscellaneous - Item No.13 - Installation of magneto telephone with all accessories and rail road dry cells (3 nos.) for each phone with wooden battery box.
8
452
11394.9
Group 'D' Miscellaneous - Item No.14 - Round the clock assistance to Rly maintenance staff after commissioning of station per 8 hours shift. i) Technician/Wireman-1 ii)Artisan staff-2 D15b 4.00 Numbers 166.45 665.80 214.54 2094.21
25
884
69543.22
Installation of 4 Pole change over switch
4
166
2094.21
Group 'E' Indoor - Item No.4 - Supply of indoor signalling cable as per IRS-S-76/89. 40 c x 0.6 mm Inspection - RDSO.
3000
77
729890.07
Group 'E' Indoor - Item No.5 (b) - Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec.no.IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee. (b) 3/0.737 mm. Inspection - RDSO. (Unit Qty. Numbers means per coil.)
200
905
569418.05
Group 'E' Indoor - Item No.5 (c) - Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec.no. IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee. (c) 7/0.75 mm. Inspection - RDSO. (Unit Qty. Numbers means per coil.)
185
1736
1010648
Group 'E' Indoor - Item No.5 (a) - Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec.no. IRS-S-76/89 material to be procured from RDSO approved firm only with performance guarantee. (a) 16/0.2 mm. Inspection - RDSO. (Unit Qty. Numbers ,means per coil.)
400
442
556899.36
Group 'E' Indoor - Item No.15 - Relay, AC Immune plug - in type, Style 'QTA2', DC Neutral track, 9 40 ohm, 2F/1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors conforming to BRS : 939A,BRS:966 (Appendix F2 ), IRS:S 34 & IRS : S 23 (as applicable ). The interlocking code for this unit shall be FGHKX. Inspection - RDSO.
100
3227
1015316.25
Group 'E' Indoor - Item No.41 -Lettering & numbering of details and description writings of 41 particulars of termination and equipments on relay rack, relays, cable termination rack, etc. constituting entire system with contractors own paint and writing materials. ("Asian" make enamel paint only to be used.). This includes supply & fixing of Teflon strips 3mm thick and 25 mm wide for each row of relays and cable terminations. The work shall be done as per extant practice on ECRly and instruction of Rly engineer at site.
17
222
11878.76
Group-E item no. 42- Termination of cable cores on ARA terminal or on 8Way terminals in the cable termination rack.
3000
6
61618.39
Group 'G' Signal - Item No.9 -Supply of position light shunt signal unit without lenses & lamps, with base & post as per RDSO Drg.no. SA-23840/ Adv/Alt-2. Inspection - Consignee.
30
3257
307363.46
Group-G- Item no. 10 - Supply of calling on signal colour light type without lamps pin , lamp holder. RDSO drawing no. SA/24351/ADV/Alt-1 Inspection- Consignee.
10
2283
71834.33
Group 'G' Signal - Item No.11 -Supply of MS number plate (200mmx300mmx3 mm ) with fixing calmps. Letter shall be of black colour in the white back ground. Details of description shall be given by site engineer. The plate & clamps shall be painted before lettering of signal numbers. Inspection - Consignee.
62
309
60341.48
Group 'G' Signal - Item No.12 - Installation, commissioning & testing of LED signals. (Qty. Unit Numbers means per aspect.)
124
364
141974.67
Group 'G' Signal - Item No.13 -Fixing of P/G/C marker with complete fittings as per instruction of site engineer.
20
103
6540.54
Group-H Item no. -1- Supply of track bonding drill machine electric operated suitable for 10mm Dia with horizontal stand. Inspection consignee.
1
17107
53810.37
Group 'H' Track Circuit - Item No.2 -Supply of Track feed resistance Disc type 0 to 15 Ohm as per drawing no. SA-20165/M Inspection - Consignee.
150
278
131351.9
Group 'I' Dismantling & releasing - Item No.1 - Releasing of lever frame, Point mechanism , detectors, Power supply equipments in locations /Cabins/SM's room etc. and other ground gears including indicators , abandoned signal posts etc.
1
13367
42046.13
Group 'I' Dismantling & releasing - Item No.2 - Releasing of signals and location boxes , other ground gears.
1
11725
36879.81
Group 'I' Dismantling & releasing - Item No.3 - Transportation of released materials except Rail posts, over head alignment to Store of SE/CON and stacking properly as per instruction of site Engineer.
1
18227
57332.46
Dismantling and releasing of following S&T gears the work includes transportation of the release 53 materials to the store of SSE/Sig/Con/SPJ and properly stacking the same in the store. (a) S&T gears in battery room/relay room this includes all equipment and relays , relay rack, termination board, batteries, battery chargerer, angle etc.
1
3574
11242.6
Dismantling and releasing of following S&T gears the work includes transportation of the release materials to the store of SSE/Sig/Con/SPJ and properly stacking the same in the store. (c) Signal post which includes dismentalling of unit, ladder, base mounted sunt signals and fittings. (units Numbers means per signal)
4
608
7661.57
Dismantling and releasing of following S&T gears the work includes transportation of the release materials to the store of SSE/Sig/Con/SPJ and properly stacking the same in the store. (g) Location box / junction box which includes realeasing of terminal board, relays, terminals, batteries and chargers.
10
293
9222.94
Group 'J' Tele. Work - Item No.6 (a) - Supply of PVC switch board cable, pair twisted, conductor of size 0.63 mm. dia Annealed copper conforming to IRS-TC-24/91 or ITD 1138. (a) 10 Pair. Inspection - Consignee.
2000
13
83982.18
Group 'J' Tele. Work - Item No.13 - Supply of Thermo shrink joint kit for 2T joints as per RDSO spec no. IRS:TC-77-2012 (Rev 3.0) with Amendment :- 1 to 3.) for 6 Quad. Inspection - Consignee.
60
1661
313512.08
Supply of thermo shrink joint kit for PIJF cable as per RDSO Spec No. IRS:TC 77-2012 with latest amendment. Inspection- Consignee
40
1136
142974.79
Group 'J' Tele. Work - Item No.15 - Installation of Thermo Shrink Jointing Kit as per DOT/Technical Specification with RDSO modification/ Termination Joints with VF Transformer on 6 quad Telecom cable.
40
1367
172014.38
Group 'J' Tele. Work - Item No.19 (a) - Supply of cable termination box. Spec.no.IRS-TC-18-75 with locking arrangements and termination of derivation cable as per the technical supplements. (a) 20 Pairs. Inspection - Consignee.
40
1420
178717.85
Group 'J' Tele. Work - Item No.19 (b) - Supply of cable termination box. Spec.no.IRS-TC-18-75 with locking arrangements and termination of derivation cable as per the technical supplements. (b) 10 Pairs. Inspection - Consignee.
35
828
91259.38
Item No.4 - Supply of route indicator ARM complete without lenses and signal transformers as per SPEC.NO. IRS: S-66/84 and RDSO DRG.No.SA 23401/ADV/ALT-2. Inspection - Consignee.
8
3764
83121.16
Item No.5 -Supply of position light shunt signal unit without lenses,lamps & signal transformer and with base and post as per RDSO Drg. No.SA-23840. Inspection - Consignee. 6 92.00 Numbers 197.00 18124.00 176.04 50029.49
30
1828
151380.34
Item No.8 - Fabrication, installation and wiring of Power distribution Board. (Hylum sheets, ARA terminals, Fuse base, fuses and wiring materials shall be supplied by the Rly). All other items required for the work to be supplied by the contractor. Inspection - Consignee.
4
1078
11902.84
Item No. 9 - Supply of LC gate road user warning alarm hooter along with accessories. Inspection- consignee
1
8246
22762.26
Item No.10 - Supply of 100 Amp. Four pole change over switch of Havel's or other standard make. Inspection - Consignee.
10
7125
196678.5
Supply & Installation of Earth Leakage Detector for monitoring different AC & DC supplies Multichannel conforming to RDSO/ SPN/256/2002 with latest amendments. (a) 12 Chanel - Inspection RDSO
4
217780
871123.56
Supply of Disconnect type Terminal, screwless, 2 IN 2 OUT (as per spec.no. RDSO/SPN/189/2004 or latest) along with all accessories including separators, channel, end stopper for fixing on Cable Termination Rack/ Location boxes for Cable Termination Purpose. Inspection - RITES
12000
103
1245120
Loading, Unloading of heavy S&T materials in 15 MT Truck.
8
10226
81808.32
Transpotation of materials by 15 MT Capacity Truck.
5000
115
575000
Transportation of less heavy materials & manpower by supply & running of one MUV to the sites of work as per requirement and direction of Engineer-in-charge along with driver. The rate includes all taxes, licence fee, road permit, driver wages, fuel, repair and maintenance cost etc, complete in all respects.
8000
35
287760
Excavation of Trench in all kind soil and refilling of Trenches without Bricks (1.5 Mtr - 1.2 Mtr. Depth, 0.500 Mtr. Width as per site requirement/ as per instruction of site engineer). Through Mechanised Means.
4000
125
502560
Supply of basic earth kit 1 set maintenance free earth as per RDSO spec.No.RDSO/SPN/197/2008 7 with latest amend consisting of followings.(i)Earth electrode of copper bondedhigh tensil low carbone steel rod, specially designed for electrical grounding as per RDSO Spec.No. RDSO/ SPN/197/2008 or latest. (ii)RDSO approved Earth enhancement compaund. 10 Kgs = 3 nos.(iii) Copper tape of 300 X 25 X 6 mm with 99.9% purity - 2 Nos and another 150 x 25 x 6 mm to terminate on earth electrode. Inspection-RDSO
50
25939
1296996.5
Fire Fighting System - Supply, Installation, Testing & commissioning of complete Automatic Fire 8 Detection & Alarm System (AFDAS) for signaling installation as per RDSO spec. no. RDSO/SPN/217/2018 ver. 2.0 or latest consisting of 01no. Control panel, 01 Flasher, 1no. hooter, 6 nos. smoke detectors, 06 nos heat detector and 01no. Manual call point. Inspection -RDSO
4
294156
1176624.28
Fire Fighting System- Supply and fixing of fire Extinguisher capacity 1 Kg. Inspection- Consignee
8
11189
89516.4
Fire Fighting System- Supply and fixing of fire Extinguisher foam type capacity 9 Ltr. Inspection- Consignee
8
4880
39042.64
Installation of unit earth connecting materials covered in item no 7 in accordance to RDSO Spec. No.RDSO/SPN/ 197/2008 or latest. i) Digging of earth to the requird depth ii) Insertion of electrodes 01 Nos. iii) Joint of electrodes using coupler.(iv) Filling of earth enhancing compound (30Kg) provision of exothermic weld connection on copper tape/bus bar of 25mm X 6mm X 150mm to the earth electrodes. ( all the materials, tools and fixtures required for the weld to be arranged by the contractor-1No. (v)Trenching , laying & exothermic weld connection of copper tape of 25 x6 x 150mm to the earth electrodes. ( all the materials, tools and fixtures required for the weld to be arranged by the contractor-1No. (vi) Provision of exothermic weld one to connecting cable to the earth electrode and another end to the copper tape to be fixed inside the equipment,relay room, Location boxes (all other materials required for the work shall be arranged by the contractor).
27
7731
208744.83
Installation of split DWC Pipe
11500
73
850770
Supply of split DWC pipe with the socket / couplar and T-Joint where ever required, size of outer dia 300 mm / inner dia 260 mm. Inspection-RITES
11500
1323
15216915
Supply and installation of Early streamer Emission lighting conductor (ESELC) fullyautonomous having lower series of energy collecting electrodes upper series of spark -generating electrodes, as in built micro 14 controller for detection of lightning down ward leader and releasing upward ladder at that very precise moment to ensure nuisance free ,,fail safe ,real need based operation any and every time ,sealed in a stainless -steel housing fixed at the center of its central rod which has full electrical connectivity direct up to earth point ,gain in triggering time of 25 micro sec giving 75 meters radious, level Ihigh protection, real life & high voltage laboratory tested, CPRI tested. Inspection- Consignee.
4
419229
1676918.4
Supply and erection of a mast/high mast suitable for ESE Technology based lighting protection 15 installation ,mechanically robust good corrosion and fire resistance 5 meter (including 2 meter FRP) long GI/MS painted, along with guying kit foundation and other accessories erquird for installation of the mast. Inspection- Consignee
4
7720
30883.68
Supply and laying of 70 sq. mm. PVC insulated flexible tinned electrolytic copper down conductor placed in a metalic/PVC protective covering wherever exposed to human intervention including saddles and all accessories etc. as required. Inspection- Consignee.
200
1424
284814
Supply & installation of resettable 6 dight LCD lighting strock recorder/transient event counter with 10 year long life lithum battery in an all whether proff box of IP67 grade protection along with clamps etc. as requird. Inspection- Consignee.
4
60093
240374.2
Supply and fixing of Equipotential Earth Bonding unit between electrical & equipment earthing in a explosion proof IP68 ensoure with inspection chember for equipotential bonding during a surge. Inspection- Consignee.
4
47440
189763.44
Supply and laying of 25 x 3 mm. pure electrolytic copper tape through suitable 'class B' G.I pipe for loop earthing and bonding as per site requirement. Inspection- Consignee.
200
1458
291678
Supply of materials and installation for making high conductive ,non corrosive maintenance free yet erperable 'Electro chemical gel earth pit using earth enhancing compound of 30 kg kit CPRI tested rod of 3 inch 20 dia ,8 fit long and 0.12 inch thick made of K type electrolytic copper with top removal gel fillinh cap seepage holes .stainless steel fastners ,HDP lockable earth pit cover cum inspection chember and allrequired acessories including desine modification to acheive the required earth termination rod resistance value below 2 ohm. Inspection- Consignee.
4
109465
437862.72
Transportation of HDT machine with accessories including handling of stores materials, preparation of site and boring for placing of 110mm dia or equivalent with three no. 63mm, 50mm HDPE/DWC PIPE for 21 crossing of S &T cable together at bridges/culverts track/pucca road / crossing, boring trench shall be minimum 3 (three) meter below the river bed and 1 (one) meter below the track/road/pacca road crossing area. This includes supply of HDPE/ DWC Pipe and accessories for HDPE/ DWC pipes, cost of fuel and all other items which will be required for laying of cable through it. The work shall be executed as per instruction of site engineer. The rate includes laying of cable through the pipe laid by HDT machine. a) Boring up to the length of 150 mtrs.
12000
1800
21610680
Transportation of HDT machine with accessories including handling of stores materials, preparation 22 of site and boring for placing of 110mm dia or equivalent with three no. 63mm, 50mm HDPE/DWC PIPE for crossing of S &T cable together at bridges/culverts track/pucca road / crossing, boring trench shall be minimum 3 (three) meter below the river bed and 1 (one) meter below the track/road/pacca road crossing area. This includes supply of HDPE/ DWC Pipe and accessories for HDPE/ DWC pipes, cost of fuel and all other items which will be required for laying of cable through it. The work shall be executed as per instruction of site engineer. The rate includes laying of cable through the pipe laid by HDT machine. b) Boring above the length of 150 mtrs. Route Kilo
2000
2348
4696060
Preperation & printing of Station Working Rule Diagram (SWRD) on AUTO CAD besed on approved SIP, ESP etc. as per the extant practice being followed in E.C. Railway. Contrctor shall supply one print of the 24 SWRD (praper printSize as requird) as draft for approval and comments. Once the approval is given shall tracing of the SWRD on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval the contractor shall supply 10 copys blue prient of the tracing. The approved SWRD shall be finally supplied on 2 CDs.
4
4330
17323.08
Preparation of Station Working Rule (SWR) in English and Hindi based on approved SIP, ESP etc. as per the extent practice being followed in E. C. Railway. The contractor shall supply two paper print of the SWR 25 as draft for approval and comments .Once the approval is given he shall supply two paper prients of the SWR for final approval and signature of the concerned officials. on obtaining the final approval the contractor shall supply 10 sets of the SWR duly photo copies from the original signed off copies of SWR .The approved SWR shall be finally supplied on 2 CDs.
4
17323
69292.32
Supply of Digital Multimeter 3&1/2 digit auto ranging digital multimeter with AC/DC current &resistance + analog +diode + contionity +Capacitance + frequencey + Min/ Max storage + data hold +temp +duty +rubber hoiser. Inspection - Consignee.
4
9708
38835.72
SUPPLY, TRANSPORTATION, INSTALLATION & COMMISSIONING OF ELECTRICALLY OPERATED LIFTING BARRIER SET as per Spec.no.RDSP/SPN/208/ 2012 EACH CONSISTING OF 2 NOS. OF LIFTING BARRIER PEDESTALS, EACH WITH MIN. 8 CONTACT CIRCUIT CONTROLLER WITH TOP ROLLER TYPE LIMIT SWITCHES, HAND CRANK, 2 ELECTRIC MOTORS, 110VAC OF CAPACITY SUITABLE TO OPERATE BARRIERS UPTO 32' LONG BOOMS,2 NOS. OF GI OCTAGONAL BOOMS OF 32' LENGTH WITH 2 27 NOS. STOP BOARDS.BOOM LIGHT BOXES, MS COUNTER WEIGHTS AND 2 NOS. OF BOOM SUPPORT WITH SUITABLE BOOM LOCKING BUT WITHOUT FRINGES ALONG WITH CONTROL PANEL WITH BUTTONS AND INDICATING LAMPS, MOTOR CONNECTORS AND MCB TO OPERATE 2 BARRIERS OF 1 SET. THIS INCLUDES SUPPLY AND INSTALLATION OF GATE HOOTER - 1 NO. AND HORN (8 WATT) - 1 NO. WITH ALL FIXING ARRANGEMENTS. ALL OF THE ABOVE ITEMS INCLUDING SUPPLY OF CEMENT, CIVIL WORK MATERIALS ETC. SHALL BE DONE BY THE CONTRACTOR FOR COMMISSIONING. 230VAC SUPPLY ONLY SHALL BE ARRANGED BY THE RAILWAY IN NEAR BY RELAY ROOM.(Complete set) - Execution
4
48348
193393.2
SUPPLY, TRANSPORTATION, INSTALLATION & COMMISSIONING OF ELECTRICALLY OPERATED LIFTING BARRIER SET as per Spec.no.RDSP/SPN/208/ 2012 EACH CONSISTING OF 2 NOS. OF LIFTING BARRIER PEDESTALS, EACH WITH MIN. 8 CONTACT CIRCUIT CONTROLLER WITH TOP ROLLER TYPE LIMIT SWITCHES, HAND CRANK, 2 ELECTRIC MOTORS, 110VAC OF CAPACITY SUITABLE TO OPERATE BARRIERS UPTO 32' LONG BOOMS,2 NOS. OF GI OCTAGONAL BOOMS OF 32' LENGTH WITH 2 28 NOS. STOP BOARDS.BOOM LIGHT BOXES, MS COUNTER WEIGHTS AND 2 NOS. OF BOOM SUPPORT WITH SUITABLE BOOM LOCKING BUT WITHOUT FRINGES ALONG WITH CONTROL PANEL WITH BUTTONS AND INDICATING LAMPS, MOTOR CONNECTORS AND MCB TO OPERATE 2 BARRIERS OF 1 SET. THIS INCLUDES SUPPLY AND INSTALLATION OF GATE HOOTER - 1 NO. AND HORN (8 WATT) - 1 NO. WITH ALL FIXING ARRANGEMENTS. ALL OF THE ABOVE ITEMS INCLUDING SUPPLY OF CEMENT, CIVIL WORK MATERIALS ETC. SHALL BE DONE BY THE CONTRACTOR FOR COMMISSIONING. 230VAC SUPPLY ONLY SHALL BE ARRANGED BY THE RAILWAY IN NEAR BY RELAY ROOM.(Complete set) - Supply - Inspection- RDSO
4
448828
1795314.08
24 b) SUPPLY OF 32 FT LONG GI OCTAGONAL BOOMS. As per RDSO/SPN/208/2012 (Ver.2.0) with latest amendment. Inspection- RDSO.
2
45110
90221.2
24bi) TIMING BELT. As per RDSO/SPN/208/2012 (Ver.2.0) with latest amendment. Inspection- RDSO. Inspection- Consignee.
2
1305
2610.1
25a) ELECTRONIC LC GATE TELEPHONE SYSTEMS WITH VOICE RECORDER AS PER RDSO SPEC.NO. RDSO/SPN/ TC/ 51/2021 REV 1.0.--MASTER TELEPHONE WITH IN-BUILT VOICE LOGGER. Inspection- CONSIGNEE
1
46849
46849.32
25b) ELECTRONIC LC GATE TELEPHONE SYSTEMS WITH VOICE RECORDER AS PER RDSO SPEC.NO. RDSO/SPN/ TC/ 51/2021 REV 1.0.--SLAVE TELEPHONE-- Inspection-CONSIGNEE
4
7170
28683.28
25c) ELECTRONIC LC GATE TELEPHONE SYSTEMS WITH VOICE RECORDER AS PER RDSO SPEC.NO. RDSO/SPN/ TC/ 51/2021 REV 1.0.--24V POWER PACK WITH MF BATTERY - 7 AH FOR LC GATE TELEPHONE -- Inspection- CONSIGNEE
1
9083
9083.04
TRACK FEED BATTERY CHARGER UP TO 10 AMP SPEC. No.IRS: S-89/2013 Ver 1.0 . Inspection- RDSO
100
8717
871714
SUPPLY OF SLIDING BOOM GATE AS PER E.RLY SIGNAL WORKSHOP/ HWHS DWG No. 35 BSA/29/730. BSA/29/731 & BSA/29/737. THIS INCLUDES SUPPLY OF 8 NOS. 'E' TYPE LOCK WITH KEY AS PER IRS SPEC.IRS:S-30/64 WITH LATST AMENDMENT. KEY LOCK E TYPE AS PER DRAWING NO. SA-3376/M WITH LATEST AMENDMENT, KEY FOR E TYPE LOCK AS PER DRAWING NO. 3377/M WITH LATEST AMENDMENT WARD NO. TO BE FIXED ON MS PLATE AS MENTIONED IN THE DRAWING . Inspection- RITES
3
246567
739703.1
CASTING CONCRETING & CURING OF FOUNDATION (1:3:6) FOR SLIDING GATE AS PER 36 DWG.NO.SGW-SDAH/ SLIDING GATE FOUNDATION / 2012 INCLUDING SUPPLY & FIXING OF HOLDING DOWN BOLTS WITH WASHERS AND NUTS, MS PLATES OF SIZE 350 MM X 350MM X 8 MM, CEMENT ETC 10 FOUNDATIONS REQUIRED IN EACH SET OF GATE
3
60731
182194.8
INSTALLATION & COMMISSIONING OF SLIDING BOOM GATE. THIS INCLUDES LEVELLING , FIXING OF SLIDING BOOM WITH FIXING OF E TYPE LOCK ETC. NOTE ALL MATERIALS EXCEPT SLIDING BOOM GATE TO BE SUPPLIED BY THE CONTRACTOR.
3
4107
12323.94
Supply of Insulation Megger 500/100 volts, 1000 Mega Ohm range, with Digital/Analog (as per instruction of site incharge) Read out. (Make & Model- RISHAV Make & Model- RISHInsu-10 or similar/ superior) . Inspection- Consignee.
2
10461
20922.04
Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non-metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 3 aspect complete without lenses, lamps and 39 signal transformer as per drg. no. SA23002/A/M /ADV. ALT-8 and per spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest and FRP material as RDSO spec.no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Inspection:- RDSO Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water.--- (i) Execution
18
2491
44847.18
Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non-metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 3 aspect complete without lenses, lamps and 40 signal transformer as per drg. no. SA23002/A/M /ADV. ALT-8 and per spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest and FRP material as RDSO spec.no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Inspection:- RDSO Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water.---(ii) Supply - Inspection- RITES
18
37856
681415.02
Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail 41 cable from location box & earthing of CLS (LED type). This includes supply of non-metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 2 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23003/A/M /ADV.ALT-8 and per spec. no. RDSO/SPN/194/ 2006 (VER-1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/ 1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water.-- (ii) Supply -- Inspection- RITES
22
35792
787435
Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non-metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 2 aspect complete without lenses, lamps and 42 signal transformer as per drg. no. SA23003/A/M /ADV.ALT-8 and per spec. no. RDSO/SPN/194/ 2006 (VER-1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/ 1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water.--- (i) Execution
22
2122
46694.56
Supply of Track feed charger alarm system. Inspection- Consignee.
4
6287
25151.36
Installation of Earth Elctrode including supply of MS Flat for clamp Signaling equipment such as lever frames, apparatus cases, Signal posts, etc. Inspection- Consignee.
160
5387
861926.4
Installation, Erection and wiring of Junction Type Route Indiator (LED type). This includes supply of non-metallic (FRP) Junction Type Route Indiator for Rly signalling suitable for RE area without lamp, lenses, signal 45 transformer as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. FRP material as per RDSO SPEWC no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal unit should be compatible to 'LED' type, Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Current Regulator & Health Monitoring unit. This also includes protection of unit from rain water.--- 1 Way as per RDSO drg. no. SA-23401(ADV)/ALT-2---(i) Execution
6
842
5056.08
Installation, Erection and wiring of Junction Type Route Indiator (LED type). This includes supply of non-metallic (FRP) Junction Type Route Indiator for Rly signalling suitable for RE area without lamp, lenses, signal transformer as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. FRP material as per RDSO SPEWC 46 no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal unit should be compatible to 'LED' type, Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Current Regulator & Health Monitoring unit. This also includes protection of unit from rain water.--- 1 Way as per RDSO drg. no. SA-23401(ADV)/ALT-2 --- (ii) Supply --- Inspection-RITES.
6
50514
303089.82
Supply of Fuse auto changeover system Type-I along with audio and visual indiation as per RDSO spec. no. RDSO/SPN/209/2012 Rev 2.0 or latest. One module of fuse alarm system should be able to cater for monitoring of 32 nos of "G" type or any other type of fuse 0.6 amp to 4 amp. Inspection- RDSO.
14
23145
324039.1
Supply installation testing and commissioning of modular work space control desk. Note:- The control desk shall be suitable to place minimum 1 UFSBIs on each side of the control desk and installation of VDU mounting wall to accommodate two VDU of approximate size of 55-65 inch). -- Inspection- Consignee.
3
744237
2232713.04
Installation and commissioing of the Fuse Auto changeover system Tyepe-I along with supply of accessories i.e. Wires, terminals as per site requirement.
14
7869
110173.14
Supply and installation of Fuse auto changeover system Type-2 for railway signalling system as per 50 RDSO/SPN/ 209/2012 rev 2.0 or latest amendments. One automatic changeover system comprise 24 nos of external Non Detoriating Type or "G" type fuses from 4 amp to 10 amp capacities which are in signalling circuits. System shall have 6 cards with monitroing arrangement of 4 fuses in one card. Inspection- RDSO.
8
38576
308615.92
Supply of Remote sensor unit for audio alarm and acknowledgement. Inspection-Consignee
4
3240
12961.56
Supply, installation, Testing & commissioning of internal Dual card RS232 to E1 convertor suitable for datalogger. Inspection- Consignee.
4
39323
157293.52
Supply of FRP (SMC) type TLJB (2 Way, Size-120 x 220 x 90 mm) with latest IP66 protection 54 (complete protection against rain water, dust, chemical/acid fumes). FRP TLJB to be supplied along with 2 no. MS angle (40 mm x 40 mm x 6 mm) and required nuts & bolts . Note:- TLJB, 6 mm thick FRP (SMC) glass fibre reinforced polyester hot compressed moulded with tongue & groove system, sealing system having chloroprene seal & cover & base. . Inspection- TLJB - RITES & PBT Terminal - RDSO
230
5467
1257472.1
Supply of reliability improvement Kit suitable to work with UFSBI as per RDSO/SPN/147/2005 or latest. It comprises (a) Automatic media changeover of modems working on redundant channels for data 55 transmission on OFC/QUAD/ Microwave Radio (any two media) = 1 Pair (b) Secondary modem for OFC/QUAD =1 Pair (c) Type C & D power line (VF24 AC/DC - 2 nos. V20C/3PH 150V - 2 nos) & Data line SPD (MDP 4D/ 5T - 2 nos) comprising suitable to work with1 pair UFSBI = 1 set(d) Power monitor & soft start unit PMSS = 1 Pair. Inspection - Consignee
8
70427
563420.72
Fixing installation of disconnect terminal (Wago or similar) on relay rack/ctr/location with steel carrier rail.
12000
1
15840
Shifting of location boxes with manual labour, JCB or poclain machine by exposing the cable gently without any damage to location box and inside signalling gear
10
4037
40371.8
Supply of Krone type termination modules with accessories and surge and lightning protector (z protection) complete for all 30 channels derived from primary mux as per technical spec. Inspection- Consignee.
200
6604
1320878
Providing and laying in position cement concrete of 1:3:6 (1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size) including cement.
50
5819
290972
Diagonistic tool for Datalogger having specs Intel Dual core i5 Motherboard 1TB SATA HDD 8GB 60 RAM COMBO DRIVE, 21" TFT Monitor 10/100/1000 LAN CARD win XPP, Norten Anti Virus, Key Board, Optical Mouse, USB, Serial, Parrallol Port with JBL SPEAKER, 56 KBPS INTERNAL MODEM, WINDOWS 10 HOME VERSION WITH RECOVERY CD or Higher specifications, ALONG WITH 600 VA or higher UPS with HP Laser Jet A4 Printer Model No. 1020 or, Similor. Inspection- Consignee.
4
89214
356856.96
Installation, wiring and testing of Automatic media change over of modems with its accessories. Note: Installation should be with remote audio and visual indication in ASM room for failure of media
8
13491
107931.28
Supply and installation of 19 inch rack mountable device consisting of four E1 ports and three slots 62 and one populated with 2W/4W E and M suppoting up to eight interfaces blance two slots empty, unit support both AC/DC power supply, including 50 pin cable one number for supporting both 2w/4w E and M C adopter one number for BPAC and UFSBI working on OFC make MROTEK or Nokia or AICATEL or MAPLE. Firm Do, make- MAPLE 4C. Inspection- RITES.
8
94966
759729.04
Supply of External E-1 convertors (Serial to E-1) for datalogger, make - Efftronics or similar. Inspection- Consignee.
4
36973
147894.84
Supply of 24 V E1 Extender. Inspection- Consignee.
4
18486
73947.4
Supply & placing of injection - molded cable channel of size width (int/ext) 240/340 mm , height 65 (int/ext) 155/230 mm , length 1 meter (+- 10 mm) , weight per meter 8 kg (top and bottom) . Material polythene Engineering Plastic with fire protection class V-0 following DIN - 53438 Part II , for laying signalling/telecom cables. As per RDSO technical specification STS/Cable -Laying practices Vol - IVDt. 09.05.2018& DIN 53438 Part - II and Railway board policy lr no. 2022/GS/IR/Cable laying policy -- Inspection- RITES.
500
2747
1373945
Fire ball as per specification :(i) To be used for extinguishing fire with very less time of 3-5 Sec, (ii) 67 Shelf life- Minimum 05 Yrs., (iii) Item Wight:1.3 Kg (Min) (iv) It should have a stand for keeping it. Warrantee/Guarantee: As per OEM,(V) GC/TC to be submitted along with the materials. Make: AFO, Elide fire or better-- Inspection-- Consignee.
100
1150
115000
Supply of Cat-6E data cable. (One box contains 305 Meter). (note: Qty. 1 number should be understood as 1 box.) Inspection : Consignee.
30
8683
260516.7
Installation, testing and commissioning of SSI equipments. ---- Barauni
4
1126994
4507976.92
Maintenance and supervision of SSI equipment's for one year.
4
541681
2166724.4
Earthing of SSI equipments,relay racks,power equipments etc. to be done along with the supply of all requisite stores as per latest Guidelines of RDSO & Railway Board.
4
342114
1368456.2
Training on EI system for Technician, Supervisors & Officers.
1
122904
122904.49
Alteration in wiring, testing and Commissioning of Lalitgram Station.
1
1250000
1250000
Activity of FAT of Lalitgram station
1
300000
300000
Design, manufacture and supply of Electronic Interlocking (Solid State Interlocking) (Hot Standby configuration) system conforming to RDSO Specification No. RDSO/SPN/192/2019 Ver.2.0 with latest amendment (if any ) as per technical specification given in tender document. Inspection - RDSO for Cards/Modules and Consignee for remaining items The work consists of following- (a) Microprocessor equipment such as as CPU card , Input card , Output card (b) Interface equipment suitable for RE (c) Dual VDU for operation ( 6 nos of fan less embedded Industrial grade PCs as per RDSO's TAN No. STS/E/TAN/3007 ver. 1.0 Dt. 02.11.2012 or latest and 6 nos of Industrial grade 55" LED operating console (VDU)) (d) 4 nos of fan less embedded Industrial grade 1 PCs as per RDSO's TAN No. STS/E/TAN/3007 ver. 1.0 Dt. 02.11.2012 or latest with 3 nos of Industrial grade 55" LED maintenance console and 1 no of Industrial grade 43" LED maintenance console along with 7 nos of 3 KVA online UPS (pure sine wave) having back up of minimum 3 hours (e) Racks, all interfacing Relays except QNA1 relay (supplied by railway) , Interlocking cables for system and power wiring , Rack fixture mounting arrangements and accessories such as PVC Truff of suitable sizes , insulators , Aluminium ladders etc for wiring as per latest RDSO TAN (f) 4 nos of Protocol converters for external datalogger with all accessories (g) Accessories necessary to make the system functional for below mentioned stations (i) Centralized EI at Asanpur Kupha , Jhajha , Baijnath Andoli (ii) Modification in the existing EI of Lalitgram along with One new end cabin as per approved Signal Interlocking plan
1
65593668
65593668.14
Supply of Tool kits and measuring instruments for testing, maintenance and repair at site. (a)-Wire Stripper, (b)-Various tools such as crimping/ Insertion / Removal tools required for maintenance, (c)- General 1 purpose tools kit (Screw driver, spanners, soldering iron, pliers etc.) as desired by Railway to suit the supplied EI system., (d)- Digital multimeter (Fluke make model-187 or better), (e) Any other tool that may be required for maintenance of EI system. These items should include suitable tool brief case for storing tools and documents to ensure longer life.) - Inspection- Consignee.
4
102456
409824.52
Supply of completion documents/drawings.
4
172942
691771.12
Supply of 48V/120 AH VRLA Battery set as per Technical spec. no. IRS-S-93/96 (B) Amd-I or latest. Inspection-RDSO
3
50262
150786.12
Supply,installation & commissioning of 48V/25Ax (2+1) SMPS based power plant as per Spec.No. RDSO/ SPN/TL/ 23/99 (Ver.3). Inspection-RDSO
3
167051
501155.7
SUPPLY AND INSTALLATION OF PUBLIC ADDRESSING SYSTEM AT STATIONS. ---SUPPLY & INSTALLATION OF AMPLIFIER TZA 250 WATTS MODEL NO. SSA.250 AHUJA MAKE OR SIMILAR ALONG WITH CONTROL PANEL. Inspection- Consignee.
3
20550
61651.41
SUPPLY AND INSTALLATION OF PUBLIC ADDRESSING SYSTEM AT STATIONS. --- SUPPLY & INSTALLATION OF MICROPHONE MODEL NO SHM-1000 XLR WITH 40 M CABLE & STAND OF AHUJA MAKE OR SIMILAR. Inspection- Consignee.
3
6912
20736.48
SUPPLY AND INSTALLATION OF PUBLIC ADDRESSING SYSTEM AT STATIONS. --- SUPPLY & INSTALLATION OF LOUD SPEAKER (HORN) 30 WATTS MODEL NO. UHC-30 X 7 WITH DRIVER UNIT OF AHUJA MAKE OR SIMILAR ALONG WITH MS CLAMP . Inspection- Consignee.
12
4759
57112.44
SUPPLY AND INSTALLATION OF PUBLIC ADDRESSING SYSTEM AT STATIONS. -- SUPPLY AND DRAWING OF PVC INSULATED SCREENED, TINNED COPPER CONDUCTOR 2 CORE, 1.5 SQ MM CABLE. Inspection- Consignee.
300
62
18885
LAYING OF SWITCH BOARD CABLE INSIDE THE CHANNEL WITH CABLE TIES TO BE PROVIDED AT 250 MM INTERVAL AND TERMINATION OF SWITCH BOARD CABLE IN THE CT BOX AS PER 7 ADVICE OF ENGINEER AT SITE. ALL THE MATERIAL REQUIRED FOR LAYING AND TERMINATION OF SWITCH BOARD CABLE TO BE SUPPLIED BY THE TENDERER AND LEFT OVER MATERIAL TO BE RETURNED TO THE RAILWAY STORE INCLUDING TRANSPORTA- TION OF SWITCH BOARD CABLE FROM THE RAILWAY STORE TO THE WORK SITE.-- 10 PAIR S.B . CABLE
300
70
21252
TRANSPORTATION OF PVC CHANNEL FROM RAILWAY STORE TO THE WORK SITE AND FIXING OF PVC CHANNEL ON WALL. ALL MATERIALS FOR FIXING TO BE SUPPLIED BY THE TENDERER AND RETURNING THE LEFT OVER MATERIALS TO THE RAILWAY STORE. --- 15 MM X 15 MM
150
66
9916.5
TRANSPORTATION OF PVC CHANNEL FROM RAILWAY STORE TO THE WORK SITE AND FIXING OF PVC CHANNEL ON WALL. ALL MATERIALS FOR FIXING TO BE SUPPLIED BY THE TENDERER AND RETURNING THE LEFT OVER MATERIALS TO THE RAILWAY STORE. --- 25 MM X 25 MM
150
74
11169
SUPPLY OF 1 KVA UPS (APC MAKE MODEL BR1000G, IN WITH 1KVA BATTERY AND 6 HR. BACKUP) MAKE- APC OR SIMILAR. Inspection- Consignee.
1
13727
13727.54
FINAL LOCATION SURVEY OF CABLE ROUTE AND FINAL PREPARATION OF CABLE ROUTE 11 PLAN FOR OFC,6 QUAD, DERIVATION,PIJF CABLE,SITE PLAN OF CABLE HUT AND OTHER BUILDING REQUIRED FOR EXECUTION OF THE WORK AND PREPARING THE SAME IN 6 HARD COPIES IN A4 SIZE PAPER WITH SPIRAL BINDING AND SUBMITTING THE SAME WITH 03 NOS. CD's ON LATEST AUTOCAD VERSION. Inspection- Consignee.
18
1439
25905.06
SUPPLY AND LAYING OF HDPE PIPE/TELECOM DUCT (OUTER DIA 40 MM) AS PER TEC 12 GENERIC REQUIREMENT NO.G/CDS-08/01 DEC'99 OR LATEST AT A DEPTH OF 1.2M IN ALL TYPE OF SOILS THIS INCLUDES TRANSPORTATION OF HDPE PIPE/ TELECOM DUCTS FROM THE RAILWAY STORE TO THE SITE AND RETURNING LEFT OVER MATERIAL TO THE RAILWAY STORE. -- (i) Supply - Inspection- RITES
40
104884
4195385.2
SUPPLY AND LAYING OF HDPE PIPE/TELECOM DUCT (OUTER DIA 40 MM) AS PER TEC 13 GENERIC REQUIREMENT NO.G/CDS-08/01 DEC'99 OR LATEST AT A DEPTH OF 1.2M IN ALL TYPE OF SOILS THIS INCLUDES TRANSPORTATION OF HDPE PIPE/ TELECOM DUCTS FROM THE RAILWAY STORE TO THE SITE AND RETURNING LEFT OVER MATERIAL TO THE RAILWAY STORE. --- (ii)Execution
30
6986
209588.1
LAYING OF OPTICAL FIBRE CABLE THROUGH HDPE PIPE/ TELECOM DUCT FOR OFC BY BLOWING AS PER DETAIL IN TECHNICAL SPECIFICATION ENCLOSED AND ADVISED BY SITE ENGINEER.
30
18287
548621.7
For Emergency commn. On 6 quad --- Fixing of Emergency Socket on one of the side walls on inside of the location box as per direction of site engineer.
12
483
5796.6
SUPPLY AND INSTALLATION OF RFID ELECTRONIC MARKER WITH CAPABILITY OF SAVING 16 THE USER SPACIFIC DATA INSIDE THE MARKER MEMORY CHIP, LATER READABLE BY LOCATOR DURING LOCATING.(10CM DIA. WITH FLOATING COIL TO KEEP DETECTION OF CIRCUIT ALWAYS HORIZONTAL FOR BETTER DETECTION) WHICH CAN BE BURIED UP TO DEPTH OF 5 Ft. SIMILAR TO 3M MAKE MODEL - EMS-1421-XR/ID) OR SIMILAR . Inspection- Consignee
75
3129
234738.75
SUPPLY AND INSTALLATION OF OFC JOINT ENCLOSURE AND MAKING STRAIGHTTHROUGH JOINTS FOR 24 FIBRE CABLE AND TESTING. THIS INCLUDES SPLICING AND MAKING PITS OF SIZE 1.2 M DIA X 1.2 M DEPTH WITH TOP COVER SLAB AS PER DRAWING. Inspection- Consignee.
8
32405
259247.76
SUPPLY AND INSTALLATION OF OFC DISTRIBUTION FRAME AS PER SPEC. DOT/G/FDF- 01/01,JAN -93 OR LATEST AND SPLICING OF OFC INSIDE THE TERMINATION BOX WITH PROVISION OF 18 TAKING OUT FIBERS OF OFC AS REQUIRED AND TESTING OF ALL FIBRE.THIS INCLUDES SUPPLY AND FIXING OF HARD WOOD BOARD OF SIZE. 3FT X 5FT X 1.5 IN.WITH WALL FIXING ARRANGEMENTS AND ALL ACCESSORIES ,I.E PIGTAIL CABLE WITH FC/PC CONNECTORS, FDF ETC.AS REQUIRED. WORK WILL DONE AS PER TECHNICAL SUPPLEMENT AND AS PER ADVISE OF SITE ENGINEER. Inspection- Consignee.
12
34209
410508.96
TESTING OF ALL FIBRES OF THE OPTIC FIBRE CABLE, QUAD, PIJF CABLE, ADM,MUX AND 19 OTHER ACCESSORIES INSTALLED ABOVE AND FINAL COMMISSIONING OF OPTICAL FIBRE COMMUNICATION LINK CONFORMING TO RAILWAY's SPECIFICATION INCLUDING END TO END TESTING FOR REALIZATION OF OPTICAL FIBRE SYSTEM.
4
24401
97606.16
SUPERVISION AND MAINTENANCE OF ENTIRE OFC SYSTEM FOR 24 HRS IN SHIFT WITH TECHNICAL SKILLED.
20
2753
55075
INSTALLATION OF RING EARTHING ARRANGEMENT SYSTEM FOR EQUIPMENT ROOM AS PER DRAWING. THE RATES INCLUDE TRANSPORTATION OF ALL MATERIALS FOR EARTHING FROM THE RAILWAY STORE AND RETURNING LEFT OVER MATERIALS TO THE RAILWAY STORE.
3
20609
61828.65
INSTALLATION AND MOUNTING OF G.P.ANTENNA ON A GI PIPE WHICH IS TO BE FITTED ON 22 THE ROOF OF EQUIPMENT ROOM AND LIGHTNING ARRESTORS ALSO TO BE MOUNTED ON A GI PIPE AS PER ADVICE OF RAILWAY ENGINEER AT SITE. ALL FIXING MATERIALS,GI PIPE,LIGHTING ARRESTORS ETC. TO BE SUPPLIED BY THE TENDERER AND LEFT OVER MATERIAL TO BE RETURNED TO THE RAILWAY STORE INCLUDING TRANSPORTATION FROM THE RAILWAY STORE TO THE WORK SITE. Inspection- Consignee.
3
29126
87380.49
Digging of trenches of 1.25 Mtr. Deep and maximum width of 0.3 Mtr. In all type of soils, as per 23 cable route plan & back filing after laying of cables. This also includes clearing of roots of trees and bushes and temporary obstruction on the selected route, ramming of soil. Where digging of trench of 1.25 M depth or 0.3 M width or both is not possible and the same can be reduced if accepted by site engineer, the payment shall be decreased proportionately to the volume. Inspection- Consignee.
2250
201
452902.5
Digging of trench across the track road, platform hard mooram & sturdy bolder area 1 M deep from rail flange/ road level and 0.3 M wide & back filling after placing of RCC pipe. This also includes supply & fixing of RCC pipe of 150 mm DIA confirming to IRS specification No. 458/ 1988 at required places as per Rly. Engineer. The pipes shall be in length not less than 2 Mtr. The pipes shall protrude minimum 5 cm. outside the rail edge on either side. If pipe is not available in one length then it should be jointed with RCC sleeve of appropriate size. The 24 ballast disturbed to be screened and dressed as required by Engineer on site. Where digging of 1 M depth is not possible the depth can be reduced as per direction of the Engineer in charge of the work. The payment will be decreased proportionate to the depth of excavation if accepted by site Engineer. The reduction in the depth will be calculated on volumetric basis and the deduction to the payment will be calculated with the rate of item No. 4 of this schedule. The payment so calculated will be deducted accordingly. For track crossing see DRG. No. CSTE/3644. This also includes restoring of surface to its original condition by contractor by his own material & labour. The contractor shall prepare drawing suiting the specific location of track crossing in the route for approval of Rlys. if required. Inspection- Consignee.
300
595
178539
SUPPLY OF PIG TAIL (10M LONG) WITH FC/PC CONNECTOR AS PER TEC SPECIFICATION No. G/OFJ-01/ 03 JUN'99 WITH LATEST AMENDMENTS. Inspection- Consignee.
480
778
373708.8
SUPPLY OF PATCH CORD (10M LONG) WITH FC / PC CONNECTOR ON BOTH SIDE AS PER TEC SPECIFICATION NO.G/OFJ-01/03 JUN'99 WITH LATEST AMENDMENTS. Inspection- Consignee.
480
1130
542817.6
SUPPLY OF CARD CONFIGURATION REQUIRED FOR 2 MB PRIMARY DROP INSERT MUX (IRS - TC-68/97). THESE CARDS SHALL BE SUPPLIED STATION WISE IN PDMX INCLUDING SURGE PROTECTING ARRANGEMENT AGAINST EACH 4W/2W/ SUBSCRIBER AS PER APPROVED CHANNELING PLAN AND ROUTE 3 PLAN STATION WISE DETAILS OF CARDS REQUIRED ARE TO BE FURNISHED INCLUDING CARDS REQUIRED FOR INTERFACING VHF COMMUNICATION, REMOTE CONTROL, RADIO PATCHING AND SPECIAL APPLICATIONS AS DETAILED IN TECHNICAL SUPPLEMENT. Note : IN CASE THE CARD CONTAINS LESS THAN 4/6 CIRCUITS PER CARD AS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TO EQUAL THE REQUIREMENTS OF 4 CIRCUITS PER CARD MUST BE OFFERED BY THE VENDOR. --- i) SUPPLY OF 2W/4W E&M/VF INTERFACE CARD (8 CIRCUITS PER CARD) - Inspection-RDSO
12
29520
354245.16
SUPPLY OF CARD CONFIGURATION REQUIRED FOR 2 MB PRIMARY DROP INSERT MUX (IRS - TC-68/97). THESE CARDS SHALL BE SUPPLIED STATION WISE IN PDMX INCLUDING SURGE PROTECTING ARRANGEMENT AGAINST EACH 4W/2W/ SUBSCRIBER AS PER APPROVED CHANNELING PLAN AND ROUTE 4 PLAN STATION WISE DETAILS OF CARDS REQUIRED ARE TO BE FURNISHED INCLUDING CARDS REQUIRED FOR INTERFACING VHF COMMUNICATION, REMOTE CONTROL, RADIO PATCHING AND SPECIAL APPLICATIONS AS DETAILED IN TECHNICAL SUPPLEMENT. Note : IN CASE THE CARD CONTAINS LESS THAN 4/6 CIRCUITS PER CARD AS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TO EQUAL THE REQUIREMENTS OF 4 CIRCUITS PER CARD MUST BE OFFERED BY THE VENDOR. --- ii) SUPPLY OF 2W HOT LINE INTERFACE CARD (8 CIRCUITS PER CARD) - Inspection-RDSO
6
25040
150243.54
SUPPLY OF CARD CONFIGURATION REQUIRED FOR 2 MB PRIMARY DROP INSERT MUX (IRS 5 - TC-68/97). THESE CARDS SHALL BE SUPPLIED STATION WISE IN PDMX INCLUDING SURGE PROTECTING ARRANGEMENT AGAINST EACH 4W/2W/ SUBSCRIBER AS PER APPROVED CHANNELING PLAN AND ROUTE PLAN STATION WISE DETAILS OF CARDS REQUIRED ARE TO BE FURNISHED INCLUDING CARDS REQUIRED FOR INTERFACING VHF COMMUNICATION, REMOTE CONTROL, RADIO PATCHING AND SPECIAL APPLICATIONS AS DETAILED IN TECHNICAL SUPPLEMENT. Note : IN CASE THE CARD CONTAINS LESS THAN 4/6 CIRCUITS PER CARD AS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TO EQUAL THE REQUIREMENTS OF 4 CIRCUITS PER CARD MUST BE OFFERED BY THE VENDOR. -- iii) SUPPLY OF SUBSCRIBER LOOP INTERFACE CARD (8 CIRCUITS PER CARD) - Inspection-RDSO
6
30550
183302.16
SUPPLY OF CARD CONFIGURATION REQUIRED FOR 2 MB PRIMARY DROP INSERT MUX (IRS - TC-68/97). THESE CARDS SHALL BE SUPPLIED STATION WISE IN PDMX INCLUDING SURGE PROTECTING ARRANGEMENT AGAINST EACH 4W/2W/ SUBSCRIBER AS PER APPROVED CHANNELING PLAN AND ROUTE 6 PLAN STATION WISE DETAILS OF CARDS REQUIRED ARE TO BE FURNISHED INCLUDING CARDS REQUIRED FOR INTERFACING VHF COMMUNICATION, REMOTE CONTROL, RADIO PATCHING AND SPECIAL APPLICATIONS AS DETAILED IN TECHNICAL SUPPLEMENT. Note : IN CASE THE CARD CONTAINS LESS THAN 4/6 CIRCUITS PER CARD AS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TO EQUAL THE REQUIREMENTS OF 4 CIRCUITS PER CARD MUST BE OFFERED BY THE VENDOR. --- (iv)SUPPLY OF EXCHANGE LOOP INTERFACE CARD (6 CIRCUITS PER CARD) - Inspection - RDSO
6
25363
152181.72
SUPPLY OF CARD CONFIGURATION REQUIRED FOR 2 MB PRIMARY DROP INSERT MUX (IRS - TC-68/97). THESE CARDS SHALL BE SUPPLIED STATION WISE IN PDMX INCLUDING SURGE PROTECTING ARRANGEMENT AGAINST EACH 4W/2W/ SUBSCRIBER AS PER APPROVED CHANNELING PLAN AND ROUTE 7 PLAN STATION WISE DETAILS OF CARDS REQUIRED ARE TO BE FURNISHED INCLUDING CARDS REQUIRED FOR INTERFACING VHF COMMUNICATION, REMOTE CONTROL, RADIO PATCHING AND SPECIAL APPLICATIONS AS DETAILED IN TECHNICAL SUPPLEMENT. Note : IN CASE THE CARD CONTAINS LESS THAN 4/6 CIRCUITS PER CARD AS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TO EQUAL THE REQUIREMENTS OF 4 CIRCUITS PER CARD MUST BE OFFERED BY THE VENDOR. -- (vi) SUPPLY OF POWER CARD FOR PDMUX (AS SPARE) - Inspection-RDSO
6
16873
101242.5
SUPPLY OF STANDARD 19" COVERED RACKS OF SIZE 2200 MM X 600 MM X 600 MM, AS PER 8 DETAILS GIVEN IN THE TECHNICAL SUPPLEMENT COMPLETE WITH ALL FITTINGS FOR HOUSING ADM, MUX & VHF EQUIPMENT INCLUDING WIRING AND SUPPLY OF OTHER ACCESSORIES, RUNWAY ALUMINIUM LADDER, MDF USING KRONE MODULE WITH INTEGRATED PROTECTION MODULE ETC.AS PER ROUTE PLAN AND CHANNELLING PLAN. Inspection- Consignee.
3
69015
207047.16
SUPPLY OF LOCAL CRAFT TERMINAL AS PER SPECIFICATION DETAILED AT TECHNICAL 9 SUPPLEMENT COMPLETE WITH ALL ACCESSORIES AND NETWORK MONITORING SYSTEM OF STM AND PMUX PRE-INSTALLED OF WINDOW VERSION AND ORIGINAL CD OF WINDOW OS SYTEM OR LATEST. Inspection- Consignee.
1
254962
254962.66
SUPPLY OF INDOOR POWER CABLE OF DIFFERENT SIZES AS PER IRS:S-76/89 OR LATEST AS DETAILED AT ANNEXURE-8.6A. -- 4 SQ.MM.- Inspection- Consignee.
150
54
8101.5
SUPPLY OF INDOOR POWER CABLE OF DIFFERENT SIZES AS PER IRS:S-76/89 OR LATEST AS DETAILED AT ANNEXURE-8.6A. --2 X 2.5 SQ MM - Inspection- Consignee.
150
512
76863
SUPPLY OF PVC CABLE CHANNEL OF DIFFERENT SIZES AS PER SPEC. AT ANNEXURE 8.8. -- - 15 MM X 15 MM - Inspection- Consignee.
150
53
7957.5
SUPPLY OF PVC CABLE CHANNEL OF DIFFERENT SIZES AS PER SPEC. AT ANNEXURE 8.8. -- 25 MM X 25 MM - Inspection- Consignee.
150
127
19155
SUPPLY OF PUSH BUTTON TELEPHONE AS PER DOT SPEC.No. DOT/TEC/G/TEL- 02/02,DEC,95 OR LATEST - Inspection- Consignee.
8
2194
17556.8
SUPPLY OF OPTICAL FIBRE CABLE SPLICE CLOSURE (24 FIBRE) AS PER TEC SPECIFICATION NO.G/OJC-02/01 MAR'99 WITH LATEST AMENDMENTS. Inspection- Consignee.
100
2236
223664
Supply of SDH Add/Drop MUX (STM1) with optical aggregates L1.1 equipped with 21 E1 expandable to 63 E1 with addition of Auxiliary cards, 6 Channel DTMF Engineering order wire, power supply as per EC spec no. GR/SDH-04/03 March 2005 with latest amendments. As per Technical spec. Make-Tejas or similar. ---Supply - Inspection- RDSO
3
346795
1040387.94
Supply of SDH Add/Drop MUX (STM1) with optical aggregates L1.1 equipped with 21 E1 17 expandable to 63 E1 with addition of Auxiliary cards, 6 Channel DTMF Engineering order wire, power supply as per EC spec no. GR/SDH-04/03 March 2005 with latest amendments. As per Technical spec. Make-Tejas or similar. --- Execution
3
50092
150277.5
Supply of Tributery interface Card of SDH ADM for dropping 21 E1 (120ohm). Make-Tejas or similar - Inspection- RDSO
1
36647
36647.52
Supply of Digital Cross connect Card for cross connecting STM-1 Optical to realise self heating STM-1 ring Make-Tejas - Inspection- RDSO
1
59571
59571.32
Supply of Programmable Primary Digital MUX with conference facility, complete with power supply, 20 control and basic /common accessories card as per technical spec IRS TC-68-2012 or latest excluding channel interface cards which are covered under item 3 of Schedule - A. Make - Webfil model -Fleximux --- Supply - Inspection- RDSO
3
129978
389935.74
Supply of Programmable Primary Digital MUX with conference facility, complete with power supply, control and basic /common accessories card as per technical spec IRS TC-68-2012 or latest excluding channel interface cards which are covered under item 3 of Schedule - A. Make - Webfil model -Fleximux --- Execution
3
47625
142875.3
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- (a) - STM-1 (Tejas make) model No.MC-1400 or latest. -- (i) ETHERNET CARD - Inspection- RDSO
1
67488
67488.97
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- (a) - STM-1 (Tejas make) model No.MC-1400 or latest. -- (ii) TET-28 CARD - Inspection- RDSO
1
48180
48180.77
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- (a) - STM-1 (Tejas make) model No.MC-1400 or latest. -- (iii)PSU CARD - Inspection- RDSO
1
30527
30527.79
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- (a) - STM-1 (Tejas make) model No.MC-1400 or latest. -- (iv) 2 PORT OPTICAL CARD(stm- 1/oc3) - Inspection- RDSO
1
52197
52197.58
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- PD MUX. (Webfil Make) - (i) NIM CARD - Inspection- RDSO
1
42096
42096.74
SUPPLY OF SPARE CARDS FOR STM-1 AND PD MUX. -- SUPPLY OF SPARE CARDS FOR STM- 1 AND PD MUX. -- PD MUX. (Webfil Make) -- (ii) TRIBUTARY CARD - Inspection- RDSO
1
63020
63020.45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements